| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * PCI VPD support | 
 |  * | 
 |  * Copyright (C) 2010 Broadcom Corporation. | 
 |  */ | 
 |  | 
 | #include <linux/pci.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/export.h> | 
 | #include <linux/sched/signal.h> | 
 | #include "pci.h" | 
 |  | 
 | /* VPD access through PCI 2.2+ VPD capability */ | 
 |  | 
 | struct pci_vpd_ops { | 
 | 	ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf); | 
 | 	ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf); | 
 | 	int (*set_size)(struct pci_dev *dev, size_t len); | 
 | }; | 
 |  | 
 | struct pci_vpd { | 
 | 	const struct pci_vpd_ops *ops; | 
 | 	struct bin_attribute *attr;	/* Descriptor for sysfs VPD entry */ | 
 | 	struct mutex	lock; | 
 | 	unsigned int	len; | 
 | 	u16		flag; | 
 | 	u8		cap; | 
 | 	unsigned int	busy:1; | 
 | 	unsigned int	valid:1; | 
 | }; | 
 |  | 
 | /** | 
 |  * pci_read_vpd - Read one entry from Vital Product Data | 
 |  * @dev:	pci device struct | 
 |  * @pos:	offset in vpd space | 
 |  * @count:	number of bytes to read | 
 |  * @buf:	pointer to where to store result | 
 |  */ | 
 | ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf) | 
 | { | 
 | 	if (!dev->vpd || !dev->vpd->ops) | 
 | 		return -ENODEV; | 
 | 	return dev->vpd->ops->read(dev, pos, count, buf); | 
 | } | 
 | EXPORT_SYMBOL(pci_read_vpd); | 
 |  | 
 | /** | 
 |  * pci_write_vpd - Write entry to Vital Product Data | 
 |  * @dev:	pci device struct | 
 |  * @pos:	offset in vpd space | 
 |  * @count:	number of bytes to write | 
 |  * @buf:	buffer containing write data | 
 |  */ | 
 | ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf) | 
 | { | 
 | 	if (!dev->vpd || !dev->vpd->ops) | 
 | 		return -ENODEV; | 
 | 	return dev->vpd->ops->write(dev, pos, count, buf); | 
 | } | 
 | EXPORT_SYMBOL(pci_write_vpd); | 
 |  | 
 | /** | 
 |  * pci_set_vpd_size - Set size of Vital Product Data space | 
 |  * @dev:	pci device struct | 
 |  * @len:	size of vpd space | 
 |  */ | 
 | int pci_set_vpd_size(struct pci_dev *dev, size_t len) | 
 | { | 
 | 	if (!dev->vpd || !dev->vpd->ops) | 
 | 		return -ENODEV; | 
 | 	return dev->vpd->ops->set_size(dev, len); | 
 | } | 
 | EXPORT_SYMBOL(pci_set_vpd_size); | 
 |  | 
 | #define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1) | 
 |  | 
 | /** | 
 |  * pci_vpd_size - determine actual size of Vital Product Data | 
 |  * @dev:	pci device struct | 
 |  * @old_size:	current assumed size, also maximum allowed size | 
 |  */ | 
 | static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size) | 
 | { | 
 | 	size_t off = 0; | 
 | 	unsigned char header[1+2];	/* 1 byte tag, 2 bytes length */ | 
 |  | 
 | 	while (off < old_size && | 
 | 	       pci_read_vpd(dev, off, 1, header) == 1) { | 
 | 		unsigned char tag; | 
 |  | 
 | 		if (header[0] & PCI_VPD_LRDT) { | 
 | 			/* Large Resource Data Type Tag */ | 
 | 			tag = pci_vpd_lrdt_tag(header); | 
 | 			/* Only read length from known tag items */ | 
 | 			if ((tag == PCI_VPD_LTIN_ID_STRING) || | 
 | 			    (tag == PCI_VPD_LTIN_RO_DATA) || | 
 | 			    (tag == PCI_VPD_LTIN_RW_DATA)) { | 
 | 				if (pci_read_vpd(dev, off+1, 2, | 
 | 						 &header[1]) != 2) { | 
 | 					pci_warn(dev, "invalid large VPD tag %02x size at offset %zu", | 
 | 						 tag, off + 1); | 
 | 					return 0; | 
 | 				} | 
 | 				off += PCI_VPD_LRDT_TAG_SIZE + | 
 | 					pci_vpd_lrdt_size(header); | 
 | 			} | 
 | 		} else { | 
 | 			/* Short Resource Data Type Tag */ | 
 | 			off += PCI_VPD_SRDT_TAG_SIZE + | 
 | 				pci_vpd_srdt_size(header); | 
 | 			tag = pci_vpd_srdt_tag(header); | 
 | 		} | 
 |  | 
 | 		if (tag == PCI_VPD_STIN_END)	/* End tag descriptor */ | 
 | 			return off; | 
 |  | 
 | 		if ((tag != PCI_VPD_LTIN_ID_STRING) && | 
 | 		    (tag != PCI_VPD_LTIN_RO_DATA) && | 
 | 		    (tag != PCI_VPD_LTIN_RW_DATA)) { | 
 | 			pci_warn(dev, "invalid %s VPD tag %02x at offset %zu", | 
 | 				 (header[0] & PCI_VPD_LRDT) ? "large" : "short", | 
 | 				 tag, off); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Wait for last operation to complete. | 
 |  * This code has to spin since there is no other notification from the PCI | 
 |  * hardware. Since the VPD is often implemented by serial attachment to an | 
 |  * EEPROM, it may take many milliseconds to complete. | 
 |  * | 
 |  * Returns 0 on success, negative values indicate error. | 
 |  */ | 
 | static int pci_vpd_wait(struct pci_dev *dev) | 
 | { | 
 | 	struct pci_vpd *vpd = dev->vpd; | 
 | 	unsigned long timeout = jiffies + msecs_to_jiffies(125); | 
 | 	unsigned long max_sleep = 16; | 
 | 	u16 status; | 
 | 	int ret; | 
 |  | 
 | 	if (!vpd->busy) | 
 | 		return 0; | 
 |  | 
 | 	do { | 
 | 		ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR, | 
 | 						&status); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		if ((status & PCI_VPD_ADDR_F) == vpd->flag) { | 
 | 			vpd->busy = 0; | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		if (fatal_signal_pending(current)) | 
 | 			return -EINTR; | 
 |  | 
 | 		if (time_after(jiffies, timeout)) | 
 | 			break; | 
 |  | 
 | 		usleep_range(10, max_sleep); | 
 | 		if (max_sleep < 1024) | 
 | 			max_sleep *= 2; | 
 | 	} while (true); | 
 |  | 
 | 	pci_warn(dev, "VPD access failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update\n"); | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count, | 
 | 			    void *arg) | 
 | { | 
 | 	struct pci_vpd *vpd = dev->vpd; | 
 | 	int ret; | 
 | 	loff_t end = pos + count; | 
 | 	u8 *buf = arg; | 
 |  | 
 | 	if (pos < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!vpd->valid) { | 
 | 		vpd->valid = 1; | 
 | 		vpd->len = pci_vpd_size(dev, vpd->len); | 
 | 	} | 
 |  | 
 | 	if (vpd->len == 0) | 
 | 		return -EIO; | 
 |  | 
 | 	if (pos > vpd->len) | 
 | 		return 0; | 
 |  | 
 | 	if (end > vpd->len) { | 
 | 		end = vpd->len; | 
 | 		count = end - pos; | 
 | 	} | 
 |  | 
 | 	if (mutex_lock_killable(&vpd->lock)) | 
 | 		return -EINTR; | 
 |  | 
 | 	ret = pci_vpd_wait(dev); | 
 | 	if (ret < 0) | 
 | 		goto out; | 
 |  | 
 | 	while (pos < end) { | 
 | 		u32 val; | 
 | 		unsigned int i, skip; | 
 |  | 
 | 		ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, | 
 | 						 pos & ~3); | 
 | 		if (ret < 0) | 
 | 			break; | 
 | 		vpd->busy = 1; | 
 | 		vpd->flag = PCI_VPD_ADDR_F; | 
 | 		ret = pci_vpd_wait(dev); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		skip = pos & 3; | 
 | 		for (i = 0;  i < sizeof(u32); i++) { | 
 | 			if (i >= skip) { | 
 | 				*buf++ = val; | 
 | 				if (++pos == end) | 
 | 					break; | 
 | 			} | 
 | 			val >>= 8; | 
 | 		} | 
 | 	} | 
 | out: | 
 | 	mutex_unlock(&vpd->lock); | 
 | 	return ret ? ret : count; | 
 | } | 
 |  | 
 | static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count, | 
 | 			     const void *arg) | 
 | { | 
 | 	struct pci_vpd *vpd = dev->vpd; | 
 | 	const u8 *buf = arg; | 
 | 	loff_t end = pos + count; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (pos < 0 || (pos & 3) || (count & 3)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!vpd->valid) { | 
 | 		vpd->valid = 1; | 
 | 		vpd->len = pci_vpd_size(dev, vpd->len); | 
 | 	} | 
 |  | 
 | 	if (vpd->len == 0) | 
 | 		return -EIO; | 
 |  | 
 | 	if (end > vpd->len) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (mutex_lock_killable(&vpd->lock)) | 
 | 		return -EINTR; | 
 |  | 
 | 	ret = pci_vpd_wait(dev); | 
 | 	if (ret < 0) | 
 | 		goto out; | 
 |  | 
 | 	while (pos < end) { | 
 | 		u32 val; | 
 |  | 
 | 		val = *buf++; | 
 | 		val |= *buf++ << 8; | 
 | 		val |= *buf++ << 16; | 
 | 		val |= *buf++ << 24; | 
 |  | 
 | 		ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val); | 
 | 		if (ret < 0) | 
 | 			break; | 
 | 		ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR, | 
 | 						 pos | PCI_VPD_ADDR_F); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		vpd->busy = 1; | 
 | 		vpd->flag = 0; | 
 | 		ret = pci_vpd_wait(dev); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		pos += sizeof(u32); | 
 | 	} | 
 | out: | 
 | 	mutex_unlock(&vpd->lock); | 
 | 	return ret ? ret : count; | 
 | } | 
 |  | 
 | static int pci_vpd_set_size(struct pci_dev *dev, size_t len) | 
 | { | 
 | 	struct pci_vpd *vpd = dev->vpd; | 
 |  | 
 | 	if (len == 0 || len > PCI_VPD_MAX_SIZE) | 
 | 		return -EIO; | 
 |  | 
 | 	vpd->valid = 1; | 
 | 	vpd->len = len; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct pci_vpd_ops pci_vpd_ops = { | 
 | 	.read = pci_vpd_read, | 
 | 	.write = pci_vpd_write, | 
 | 	.set_size = pci_vpd_set_size, | 
 | }; | 
 |  | 
 | static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count, | 
 | 			       void *arg) | 
 | { | 
 | 	struct pci_dev *tdev = pci_get_slot(dev->bus, | 
 | 					    PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | 
 | 	ssize_t ret; | 
 |  | 
 | 	if (!tdev) | 
 | 		return -ENODEV; | 
 |  | 
 | 	ret = pci_read_vpd(tdev, pos, count, arg); | 
 | 	pci_dev_put(tdev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count, | 
 | 				const void *arg) | 
 | { | 
 | 	struct pci_dev *tdev = pci_get_slot(dev->bus, | 
 | 					    PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | 
 | 	ssize_t ret; | 
 |  | 
 | 	if (!tdev) | 
 | 		return -ENODEV; | 
 |  | 
 | 	ret = pci_write_vpd(tdev, pos, count, arg); | 
 | 	pci_dev_put(tdev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int pci_vpd_f0_set_size(struct pci_dev *dev, size_t len) | 
 | { | 
 | 	struct pci_dev *tdev = pci_get_slot(dev->bus, | 
 | 					    PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | 
 | 	int ret; | 
 |  | 
 | 	if (!tdev) | 
 | 		return -ENODEV; | 
 |  | 
 | 	ret = pci_set_vpd_size(tdev, len); | 
 | 	pci_dev_put(tdev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct pci_vpd_ops pci_vpd_f0_ops = { | 
 | 	.read = pci_vpd_f0_read, | 
 | 	.write = pci_vpd_f0_write, | 
 | 	.set_size = pci_vpd_f0_set_size, | 
 | }; | 
 |  | 
 | int pci_vpd_init(struct pci_dev *dev) | 
 | { | 
 | 	struct pci_vpd *vpd; | 
 | 	u8 cap; | 
 |  | 
 | 	cap = pci_find_capability(dev, PCI_CAP_ID_VPD); | 
 | 	if (!cap) | 
 | 		return -ENODEV; | 
 |  | 
 | 	vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC); | 
 | 	if (!vpd) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	vpd->len = PCI_VPD_MAX_SIZE; | 
 | 	if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) | 
 | 		vpd->ops = &pci_vpd_f0_ops; | 
 | 	else | 
 | 		vpd->ops = &pci_vpd_ops; | 
 | 	mutex_init(&vpd->lock); | 
 | 	vpd->cap = cap; | 
 | 	vpd->busy = 0; | 
 | 	vpd->valid = 0; | 
 | 	dev->vpd = vpd; | 
 | 	return 0; | 
 | } | 
 |  | 
 | void pci_vpd_release(struct pci_dev *dev) | 
 | { | 
 | 	kfree(dev->vpd); | 
 | } | 
 |  | 
 | static ssize_t read_vpd_attr(struct file *filp, struct kobject *kobj, | 
 | 			     struct bin_attribute *bin_attr, char *buf, | 
 | 			     loff_t off, size_t count) | 
 | { | 
 | 	struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj)); | 
 |  | 
 | 	if (bin_attr->size > 0) { | 
 | 		if (off > bin_attr->size) | 
 | 			count = 0; | 
 | 		else if (count > bin_attr->size - off) | 
 | 			count = bin_attr->size - off; | 
 | 	} | 
 |  | 
 | 	return pci_read_vpd(dev, off, count, buf); | 
 | } | 
 |  | 
 | static ssize_t write_vpd_attr(struct file *filp, struct kobject *kobj, | 
 | 			      struct bin_attribute *bin_attr, char *buf, | 
 | 			      loff_t off, size_t count) | 
 | { | 
 | 	struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj)); | 
 |  | 
 | 	if (bin_attr->size > 0) { | 
 | 		if (off > bin_attr->size) | 
 | 			count = 0; | 
 | 		else if (count > bin_attr->size - off) | 
 | 			count = bin_attr->size - off; | 
 | 	} | 
 |  | 
 | 	return pci_write_vpd(dev, off, count, buf); | 
 | } | 
 |  | 
 | void pcie_vpd_create_sysfs_dev_files(struct pci_dev *dev) | 
 | { | 
 | 	int retval; | 
 | 	struct bin_attribute *attr; | 
 |  | 
 | 	if (!dev->vpd) | 
 | 		return; | 
 |  | 
 | 	attr = kzalloc(sizeof(*attr), GFP_ATOMIC); | 
 | 	if (!attr) | 
 | 		return; | 
 |  | 
 | 	sysfs_bin_attr_init(attr); | 
 | 	attr->size = 0; | 
 | 	attr->attr.name = "vpd"; | 
 | 	attr->attr.mode = S_IRUSR | S_IWUSR; | 
 | 	attr->read = read_vpd_attr; | 
 | 	attr->write = write_vpd_attr; | 
 | 	retval = sysfs_create_bin_file(&dev->dev.kobj, attr); | 
 | 	if (retval) { | 
 | 		kfree(attr); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	dev->vpd->attr = attr; | 
 | } | 
 |  | 
 | void pcie_vpd_remove_sysfs_dev_files(struct pci_dev *dev) | 
 | { | 
 | 	if (dev->vpd && dev->vpd->attr) { | 
 | 		sysfs_remove_bin_file(&dev->dev.kobj, dev->vpd->attr); | 
 | 		kfree(dev->vpd->attr); | 
 | 	} | 
 | } | 
 |  | 
 | int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = off; i < len; ) { | 
 | 		u8 val = buf[i]; | 
 |  | 
 | 		if (val & PCI_VPD_LRDT) { | 
 | 			/* Don't return success of the tag isn't complete */ | 
 | 			if (i + PCI_VPD_LRDT_TAG_SIZE > len) | 
 | 				break; | 
 |  | 
 | 			if (val == rdt) | 
 | 				return i; | 
 |  | 
 | 			i += PCI_VPD_LRDT_TAG_SIZE + | 
 | 			     pci_vpd_lrdt_size(&buf[i]); | 
 | 		} else { | 
 | 			u8 tag = val & ~PCI_VPD_SRDT_LEN_MASK; | 
 |  | 
 | 			if (tag == rdt) | 
 | 				return i; | 
 |  | 
 | 			if (tag == PCI_VPD_SRDT_END) | 
 | 				break; | 
 |  | 
 | 			i += PCI_VPD_SRDT_TAG_SIZE + | 
 | 			     pci_vpd_srdt_size(&buf[i]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return -ENOENT; | 
 | } | 
 | EXPORT_SYMBOL_GPL(pci_vpd_find_tag); | 
 |  | 
 | int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off, | 
 | 			      unsigned int len, const char *kw) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = off; i + PCI_VPD_INFO_FLD_HDR_SIZE <= off + len;) { | 
 | 		if (buf[i + 0] == kw[0] && | 
 | 		    buf[i + 1] == kw[1]) | 
 | 			return i; | 
 |  | 
 | 		i += PCI_VPD_INFO_FLD_HDR_SIZE + | 
 | 		     pci_vpd_info_field_size(&buf[i]); | 
 | 	} | 
 |  | 
 | 	return -ENOENT; | 
 | } | 
 | EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword); | 
 |  | 
 | #ifdef CONFIG_PCI_QUIRKS | 
 | /* | 
 |  * Quirk non-zero PCI functions to route VPD access through function 0 for | 
 |  * devices that share VPD resources between functions.  The functions are | 
 |  * expected to be identical devices. | 
 |  */ | 
 | static void quirk_f0_vpd_link(struct pci_dev *dev) | 
 | { | 
 | 	struct pci_dev *f0; | 
 |  | 
 | 	if (!PCI_FUNC(dev->devfn)) | 
 | 		return; | 
 |  | 
 | 	f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | 
 | 	if (!f0) | 
 | 		return; | 
 |  | 
 | 	if (f0->vpd && dev->class == f0->class && | 
 | 	    dev->vendor == f0->vendor && dev->device == f0->device) | 
 | 		dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; | 
 |  | 
 | 	pci_dev_put(f0); | 
 | } | 
 | DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, | 
 | 			      PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); | 
 |  | 
 | /* | 
 |  * If a device follows the VPD format spec, the PCI core will not read or | 
 |  * write past the VPD End Tag.  But some vendors do not follow the VPD | 
 |  * format spec, so we can't tell how much data is safe to access.  Devices | 
 |  * may behave unpredictably if we access too much.  Blacklist these devices | 
 |  * so we don't touch VPD at all. | 
 |  */ | 
 | static void quirk_blacklist_vpd(struct pci_dev *dev) | 
 | { | 
 | 	if (dev->vpd) { | 
 | 		dev->vpd->len = 0; | 
 | 		pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n"); | 
 | 	} | 
 | } | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, | 
 | 		quirk_blacklist_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd); | 
 |  | 
 | /* | 
 |  * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the | 
 |  * VPD end tag will hang the device.  This problem was initially | 
 |  * observed when a vpd entry was created in sysfs | 
 |  * ('/sys/bus/pci/devices/<id>/vpd').   A read to this sysfs entry | 
 |  * will dump 32k of data.  Reading a full 32k will cause an access | 
 |  * beyond the VPD end tag causing the device to hang.  Once the device | 
 |  * is hung, the bnx2 driver will not be able to reset the device. | 
 |  * We believe that it is legal to read beyond the end tag and | 
 |  * therefore the solution is to limit the read/write length. | 
 |  */ | 
 | static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) | 
 | { | 
 | 	/* | 
 | 	 * Only disable the VPD capability for 5706, 5706S, 5708, | 
 | 	 * 5708S and 5709 rev. A | 
 | 	 */ | 
 | 	if ((dev->device == PCI_DEVICE_ID_NX2_5706) || | 
 | 	    (dev->device == PCI_DEVICE_ID_NX2_5706S) || | 
 | 	    (dev->device == PCI_DEVICE_ID_NX2_5708) || | 
 | 	    (dev->device == PCI_DEVICE_ID_NX2_5708S) || | 
 | 	    ((dev->device == PCI_DEVICE_ID_NX2_5709) && | 
 | 	     (dev->revision & 0xf0) == 0x0)) { | 
 | 		if (dev->vpd) | 
 | 			dev->vpd->len = 0x80; | 
 | 	} | 
 | } | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | 
 | 			PCI_DEVICE_ID_NX2_5706, | 
 | 			quirk_brcm_570x_limit_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | 
 | 			PCI_DEVICE_ID_NX2_5706S, | 
 | 			quirk_brcm_570x_limit_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | 
 | 			PCI_DEVICE_ID_NX2_5708, | 
 | 			quirk_brcm_570x_limit_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | 
 | 			PCI_DEVICE_ID_NX2_5708S, | 
 | 			quirk_brcm_570x_limit_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | 
 | 			PCI_DEVICE_ID_NX2_5709, | 
 | 			quirk_brcm_570x_limit_vpd); | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, | 
 | 			PCI_DEVICE_ID_NX2_5709S, | 
 | 			quirk_brcm_570x_limit_vpd); | 
 |  | 
 | static void quirk_chelsio_extend_vpd(struct pci_dev *dev) | 
 | { | 
 | 	int chip = (dev->device & 0xf000) >> 12; | 
 | 	int func = (dev->device & 0x0f00) >>  8; | 
 | 	int prod = (dev->device & 0x00ff) >>  0; | 
 |  | 
 | 	/* | 
 | 	 * If this is a T3-based adapter, there's a 1KB VPD area at offset | 
 | 	 * 0xc00 which contains the preferred VPD values.  If this is a T4 or | 
 | 	 * later based adapter, the special VPD is at offset 0x400 for the | 
 | 	 * Physical Functions (the SR-IOV Virtual Functions have no VPD | 
 | 	 * Capabilities).  The PCI VPD Access core routines will normally | 
 | 	 * compute the size of the VPD by parsing the VPD Data Structure at | 
 | 	 * offset 0x000.  This will result in silent failures when attempting | 
 | 	 * to accesses these other VPD areas which are beyond those computed | 
 | 	 * limits. | 
 | 	 */ | 
 | 	if (chip == 0x0 && prod >= 0x20) | 
 | 		pci_set_vpd_size(dev, 8192); | 
 | 	else if (chip >= 0x4 && func < 0x8) | 
 | 		pci_set_vpd_size(dev, 2048); | 
 | } | 
 |  | 
 | DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, | 
 | 			quirk_chelsio_extend_vpd); | 
 |  | 
 | #endif |