| /* | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2017	Intel Deutschland GmbH | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/rtnetlink.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include "rate.h" | 
 | #include "ieee80211_i.h" | 
 | #include "debugfs.h" | 
 |  | 
 | struct rate_control_alg { | 
 | 	struct list_head list; | 
 | 	const struct rate_control_ops *ops; | 
 | }; | 
 |  | 
 | static LIST_HEAD(rate_ctrl_algs); | 
 | static DEFINE_MUTEX(rate_ctrl_mutex); | 
 |  | 
 | static char *ieee80211_default_rc_algo = CONFIG_MAC80211_RC_DEFAULT; | 
 | module_param(ieee80211_default_rc_algo, charp, 0644); | 
 | MODULE_PARM_DESC(ieee80211_default_rc_algo, | 
 | 		 "Default rate control algorithm for mac80211 to use"); | 
 |  | 
 | void rate_control_rate_init(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_local *local = sta->sdata->local; | 
 | 	struct rate_control_ref *ref = sta->rate_ctrl; | 
 | 	struct ieee80211_sta *ista = &sta->sta; | 
 | 	void *priv_sta = sta->rate_ctrl_priv; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 	ieee80211_sta_set_rx_nss(sta); | 
 |  | 
 | 	if (!ref) | 
 | 		return; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf); | 
 | 	if (WARN_ON(!chanctx_conf)) { | 
 | 		rcu_read_unlock(); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band]; | 
 |  | 
 | 	spin_lock_bh(&sta->rate_ctrl_lock); | 
 | 	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista, | 
 | 			    priv_sta); | 
 | 	spin_unlock_bh(&sta->rate_ctrl_lock); | 
 | 	rcu_read_unlock(); | 
 | 	set_sta_flag(sta, WLAN_STA_RATE_CONTROL); | 
 | } | 
 |  | 
 | void rate_control_tx_status(struct ieee80211_local *local, | 
 | 			    struct ieee80211_supported_band *sband, | 
 | 			    struct ieee80211_tx_status *st) | 
 | { | 
 | 	struct rate_control_ref *ref = local->rate_ctrl; | 
 | 	struct sta_info *sta = container_of(st->sta, struct sta_info, sta); | 
 | 	void *priv_sta = sta->rate_ctrl_priv; | 
 |  | 
 | 	if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) | 
 | 		return; | 
 |  | 
 | 	spin_lock_bh(&sta->rate_ctrl_lock); | 
 | 	if (ref->ops->tx_status_ext) | 
 | 		ref->ops->tx_status_ext(ref->priv, sband, priv_sta, st); | 
 | 	else if (st->skb) | 
 | 		ref->ops->tx_status(ref->priv, sband, st->sta, priv_sta, st->skb); | 
 | 	else | 
 | 		WARN_ON_ONCE(1); | 
 |  | 
 | 	spin_unlock_bh(&sta->rate_ctrl_lock); | 
 | } | 
 |  | 
 | void rate_control_rate_update(struct ieee80211_local *local, | 
 | 				    struct ieee80211_supported_band *sband, | 
 | 				    struct sta_info *sta, u32 changed) | 
 | { | 
 | 	struct rate_control_ref *ref = local->rate_ctrl; | 
 | 	struct ieee80211_sta *ista = &sta->sta; | 
 | 	void *priv_sta = sta->rate_ctrl_priv; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 	if (ref && ref->ops->rate_update) { | 
 | 		rcu_read_lock(); | 
 |  | 
 | 		chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf); | 
 | 		if (WARN_ON(!chanctx_conf)) { | 
 | 			rcu_read_unlock(); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		spin_lock_bh(&sta->rate_ctrl_lock); | 
 | 		ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def, | 
 | 				      ista, priv_sta, changed); | 
 | 		spin_unlock_bh(&sta->rate_ctrl_lock); | 
 | 		rcu_read_unlock(); | 
 | 	} | 
 | 	drv_sta_rc_update(local, sta->sdata, &sta->sta, changed); | 
 | } | 
 |  | 
 | int ieee80211_rate_control_register(const struct rate_control_ops *ops) | 
 | { | 
 | 	struct rate_control_alg *alg; | 
 |  | 
 | 	if (!ops->name) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&rate_ctrl_mutex); | 
 | 	list_for_each_entry(alg, &rate_ctrl_algs, list) { | 
 | 		if (!strcmp(alg->ops->name, ops->name)) { | 
 | 			/* don't register an algorithm twice */ | 
 | 			WARN_ON(1); | 
 | 			mutex_unlock(&rate_ctrl_mutex); | 
 | 			return -EALREADY; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	alg = kzalloc(sizeof(*alg), GFP_KERNEL); | 
 | 	if (alg == NULL) { | 
 | 		mutex_unlock(&rate_ctrl_mutex); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	alg->ops = ops; | 
 |  | 
 | 	list_add_tail(&alg->list, &rate_ctrl_algs); | 
 | 	mutex_unlock(&rate_ctrl_mutex); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rate_control_register); | 
 |  | 
 | void ieee80211_rate_control_unregister(const struct rate_control_ops *ops) | 
 | { | 
 | 	struct rate_control_alg *alg; | 
 |  | 
 | 	mutex_lock(&rate_ctrl_mutex); | 
 | 	list_for_each_entry(alg, &rate_ctrl_algs, list) { | 
 | 		if (alg->ops == ops) { | 
 | 			list_del(&alg->list); | 
 | 			kfree(alg); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&rate_ctrl_mutex); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rate_control_unregister); | 
 |  | 
 | static const struct rate_control_ops * | 
 | ieee80211_try_rate_control_ops_get(const char *name) | 
 | { | 
 | 	struct rate_control_alg *alg; | 
 | 	const struct rate_control_ops *ops = NULL; | 
 |  | 
 | 	if (!name) | 
 | 		return NULL; | 
 |  | 
 | 	mutex_lock(&rate_ctrl_mutex); | 
 | 	list_for_each_entry(alg, &rate_ctrl_algs, list) { | 
 | 		if (!strcmp(alg->ops->name, name)) { | 
 | 			ops = alg->ops; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&rate_ctrl_mutex); | 
 | 	return ops; | 
 | } | 
 |  | 
 | /* Get the rate control algorithm. */ | 
 | static const struct rate_control_ops * | 
 | ieee80211_rate_control_ops_get(const char *name) | 
 | { | 
 | 	const struct rate_control_ops *ops; | 
 | 	const char *alg_name; | 
 |  | 
 | 	kernel_param_lock(THIS_MODULE); | 
 | 	if (!name) | 
 | 		alg_name = ieee80211_default_rc_algo; | 
 | 	else | 
 | 		alg_name = name; | 
 |  | 
 | 	ops = ieee80211_try_rate_control_ops_get(alg_name); | 
 | 	if (!ops && name) | 
 | 		/* try default if specific alg requested but not found */ | 
 | 		ops = ieee80211_try_rate_control_ops_get(ieee80211_default_rc_algo); | 
 |  | 
 | 	/* Note: check for > 0 is intentional to avoid clang warning */ | 
 | 	if (!ops && (strlen(CONFIG_MAC80211_RC_DEFAULT) > 0)) | 
 | 		/* try built-in one if specific alg requested but not found */ | 
 | 		ops = ieee80211_try_rate_control_ops_get(CONFIG_MAC80211_RC_DEFAULT); | 
 |  | 
 | 	kernel_param_unlock(THIS_MODULE); | 
 |  | 
 | 	return ops; | 
 | } | 
 |  | 
 | #ifdef CONFIG_MAC80211_DEBUGFS | 
 | static ssize_t rcname_read(struct file *file, char __user *userbuf, | 
 | 			   size_t count, loff_t *ppos) | 
 | { | 
 | 	struct rate_control_ref *ref = file->private_data; | 
 | 	int len = strlen(ref->ops->name); | 
 |  | 
 | 	return simple_read_from_buffer(userbuf, count, ppos, | 
 | 				       ref->ops->name, len); | 
 | } | 
 |  | 
 | static const struct file_operations rcname_ops = { | 
 | 	.read = rcname_read, | 
 | 	.open = simple_open, | 
 | 	.llseek = default_llseek, | 
 | }; | 
 | #endif | 
 |  | 
 | static struct rate_control_ref *rate_control_alloc(const char *name, | 
 | 					    struct ieee80211_local *local) | 
 | { | 
 | 	struct dentry *debugfsdir = NULL; | 
 | 	struct rate_control_ref *ref; | 
 |  | 
 | 	ref = kmalloc(sizeof(struct rate_control_ref), GFP_KERNEL); | 
 | 	if (!ref) | 
 | 		return NULL; | 
 | 	ref->ops = ieee80211_rate_control_ops_get(name); | 
 | 	if (!ref->ops) | 
 | 		goto free; | 
 |  | 
 | #ifdef CONFIG_MAC80211_DEBUGFS | 
 | 	debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir); | 
 | 	local->debugfs.rcdir = debugfsdir; | 
 | 	debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops); | 
 | #endif | 
 |  | 
 | 	ref->priv = ref->ops->alloc(&local->hw, debugfsdir); | 
 | 	if (!ref->priv) | 
 | 		goto free; | 
 | 	return ref; | 
 |  | 
 | free: | 
 | 	kfree(ref); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void rate_control_free(struct ieee80211_local *local, | 
 | 			      struct rate_control_ref *ctrl_ref) | 
 | { | 
 | 	ctrl_ref->ops->free(ctrl_ref->priv); | 
 |  | 
 | #ifdef CONFIG_MAC80211_DEBUGFS | 
 | 	debugfs_remove_recursive(local->debugfs.rcdir); | 
 | 	local->debugfs.rcdir = NULL; | 
 | #endif | 
 |  | 
 | 	kfree(ctrl_ref); | 
 | } | 
 |  | 
 | void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	u32 user_mask, basic_rates = sdata->vif.bss_conf.basic_rates; | 
 | 	enum nl80211_band band; | 
 |  | 
 | 	if (WARN_ON(!sdata->vif.bss_conf.chandef.chan)) | 
 | 		return; | 
 |  | 
 | 	if (WARN_ON_ONCE(!basic_rates)) | 
 | 		return; | 
 |  | 
 | 	band = sdata->vif.bss_conf.chandef.chan->band; | 
 | 	user_mask = sdata->rc_rateidx_mask[band]; | 
 | 	sband = local->hw.wiphy->bands[band]; | 
 |  | 
 | 	if (user_mask & basic_rates) | 
 | 		return; | 
 |  | 
 | 	sdata_dbg(sdata, | 
 | 		  "no overlap between basic rates (0x%x) and user mask (0x%x on band %d) - clearing the latter", | 
 | 		  basic_rates, user_mask, band); | 
 | 	sdata->rc_rateidx_mask[band] = (1 << sband->n_bitrates) - 1; | 
 | } | 
 |  | 
 | static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc) | 
 | { | 
 | 	struct sk_buff *skb = txrc->skb; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	__le16 fc; | 
 |  | 
 | 	fc = hdr->frame_control; | 
 |  | 
 | 	return (info->flags & (IEEE80211_TX_CTL_NO_ACK | | 
 | 			       IEEE80211_TX_CTL_USE_MINRATE)) || | 
 | 		!ieee80211_is_data(fc); | 
 | } | 
 |  | 
 | static void rc_send_low_basicrate(s8 *idx, u32 basic_rates, | 
 | 				  struct ieee80211_supported_band *sband) | 
 | { | 
 | 	u8 i; | 
 |  | 
 | 	if (basic_rates == 0) | 
 | 		return; /* assume basic rates unknown and accept rate */ | 
 | 	if (*idx < 0) | 
 | 		return; | 
 | 	if (basic_rates & (1 << *idx)) | 
 | 		return; /* selected rate is a basic rate */ | 
 |  | 
 | 	for (i = *idx + 1; i <= sband->n_bitrates; i++) { | 
 | 		if (basic_rates & (1 << i)) { | 
 | 			*idx = i; | 
 | 			return; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* could not find a basic rate; use original selection */ | 
 | } | 
 |  | 
 | static void __rate_control_send_low(struct ieee80211_hw *hw, | 
 | 				    struct ieee80211_supported_band *sband, | 
 | 				    struct ieee80211_sta *sta, | 
 | 				    struct ieee80211_tx_info *info, | 
 | 				    u32 rate_mask) | 
 | { | 
 | 	int i; | 
 | 	u32 rate_flags = | 
 | 		ieee80211_chandef_rate_flags(&hw->conf.chandef); | 
 |  | 
 | 	if ((sband->band == NL80211_BAND_2GHZ) && | 
 | 	    (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)) | 
 | 		rate_flags |= IEEE80211_RATE_ERP_G; | 
 |  | 
 | 	info->control.rates[0].idx = 0; | 
 | 	for (i = 0; i < sband->n_bitrates; i++) { | 
 | 		if (!(rate_mask & BIT(i))) | 
 | 			continue; | 
 |  | 
 | 		if ((rate_flags & sband->bitrates[i].flags) != rate_flags) | 
 | 			continue; | 
 |  | 
 | 		if (!rate_supported(sta, sband->band, i)) | 
 | 			continue; | 
 |  | 
 | 		info->control.rates[0].idx = i; | 
 | 		break; | 
 | 	} | 
 | 	WARN_ONCE(i == sband->n_bitrates, | 
 | 		  "no supported rates (0x%x) in rate_mask 0x%x with flags 0x%x\n", | 
 | 		  sta ? sta->supp_rates[sband->band] : -1, | 
 | 		  rate_mask, rate_flags); | 
 |  | 
 | 	info->control.rates[0].count = | 
 | 		(info->flags & IEEE80211_TX_CTL_NO_ACK) ? | 
 | 		1 : hw->max_rate_tries; | 
 |  | 
 | 	info->control.skip_table = 1; | 
 | } | 
 |  | 
 |  | 
 | bool rate_control_send_low(struct ieee80211_sta *pubsta, | 
 | 			   void *priv_sta, | 
 | 			   struct ieee80211_tx_rate_control *txrc) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); | 
 | 	struct ieee80211_supported_band *sband = txrc->sband; | 
 | 	struct sta_info *sta; | 
 | 	int mcast_rate; | 
 | 	bool use_basicrate = false; | 
 |  | 
 | 	if (!pubsta || !priv_sta || rc_no_data_or_no_ack_use_min(txrc)) { | 
 | 		__rate_control_send_low(txrc->hw, sband, pubsta, info, | 
 | 					txrc->rate_idx_mask); | 
 |  | 
 | 		if (!pubsta && txrc->bss) { | 
 | 			mcast_rate = txrc->bss_conf->mcast_rate[sband->band]; | 
 | 			if (mcast_rate > 0) { | 
 | 				info->control.rates[0].idx = mcast_rate - 1; | 
 | 				return true; | 
 | 			} | 
 | 			use_basicrate = true; | 
 | 		} else if (pubsta) { | 
 | 			sta = container_of(pubsta, struct sta_info, sta); | 
 | 			if (ieee80211_vif_is_mesh(&sta->sdata->vif)) | 
 | 				use_basicrate = true; | 
 | 		} | 
 |  | 
 | 		if (use_basicrate) | 
 | 			rc_send_low_basicrate(&info->control.rates[0].idx, | 
 | 					      txrc->bss_conf->basic_rates, | 
 | 					      sband); | 
 |  | 
 | 		return true; | 
 | 	} | 
 | 	return false; | 
 | } | 
 | EXPORT_SYMBOL(rate_control_send_low); | 
 |  | 
 | static bool rate_idx_match_legacy_mask(s8 *rate_idx, int n_bitrates, u32 mask) | 
 | { | 
 | 	int j; | 
 |  | 
 | 	/* See whether the selected rate or anything below it is allowed. */ | 
 | 	for (j = *rate_idx; j >= 0; j--) { | 
 | 		if (mask & (1 << j)) { | 
 | 			/* Okay, found a suitable rate. Use it. */ | 
 | 			*rate_idx = j; | 
 | 			return true; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Try to find a higher rate that would be allowed */ | 
 | 	for (j = *rate_idx + 1; j < n_bitrates; j++) { | 
 | 		if (mask & (1 << j)) { | 
 | 			/* Okay, found a suitable rate. Use it. */ | 
 | 			*rate_idx = j; | 
 | 			return true; | 
 | 		} | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | static bool rate_idx_match_mcs_mask(s8 *rate_idx, u8 *mcs_mask) | 
 | { | 
 | 	int i, j; | 
 | 	int ridx, rbit; | 
 |  | 
 | 	ridx = *rate_idx / 8; | 
 | 	rbit = *rate_idx % 8; | 
 |  | 
 | 	/* sanity check */ | 
 | 	if (ridx < 0 || ridx >= IEEE80211_HT_MCS_MASK_LEN) | 
 | 		return false; | 
 |  | 
 | 	/* See whether the selected rate or anything below it is allowed. */ | 
 | 	for (i = ridx; i >= 0; i--) { | 
 | 		for (j = rbit; j >= 0; j--) | 
 | 			if (mcs_mask[i] & BIT(j)) { | 
 | 				*rate_idx = i * 8 + j; | 
 | 				return true; | 
 | 			} | 
 | 		rbit = 7; | 
 | 	} | 
 |  | 
 | 	/* Try to find a higher rate that would be allowed */ | 
 | 	ridx = (*rate_idx + 1) / 8; | 
 | 	rbit = (*rate_idx + 1) % 8; | 
 |  | 
 | 	for (i = ridx; i < IEEE80211_HT_MCS_MASK_LEN; i++) { | 
 | 		for (j = rbit; j < 8; j++) | 
 | 			if (mcs_mask[i] & BIT(j)) { | 
 | 				*rate_idx = i * 8 + j; | 
 | 				return true; | 
 | 			} | 
 | 		rbit = 0; | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | static bool rate_idx_match_vht_mcs_mask(s8 *rate_idx, u16 *vht_mask) | 
 | { | 
 | 	int i, j; | 
 | 	int ridx, rbit; | 
 |  | 
 | 	ridx = *rate_idx >> 4; | 
 | 	rbit = *rate_idx & 0xf; | 
 |  | 
 | 	if (ridx < 0 || ridx >= NL80211_VHT_NSS_MAX) | 
 | 		return false; | 
 |  | 
 | 	/* See whether the selected rate or anything below it is allowed. */ | 
 | 	for (i = ridx; i >= 0; i--) { | 
 | 		for (j = rbit; j >= 0; j--) { | 
 | 			if (vht_mask[i] & BIT(j)) { | 
 | 				*rate_idx = (i << 4) | j; | 
 | 				return true; | 
 | 			} | 
 | 		} | 
 | 		rbit = 15; | 
 | 	} | 
 |  | 
 | 	/* Try to find a higher rate that would be allowed */ | 
 | 	ridx = (*rate_idx + 1) >> 4; | 
 | 	rbit = (*rate_idx + 1) & 0xf; | 
 |  | 
 | 	for (i = ridx; i < NL80211_VHT_NSS_MAX; i++) { | 
 | 		for (j = rbit; j < 16; j++) { | 
 | 			if (vht_mask[i] & BIT(j)) { | 
 | 				*rate_idx = (i << 4) | j; | 
 | 				return true; | 
 | 			} | 
 | 		} | 
 | 		rbit = 0; | 
 | 	} | 
 | 	return false; | 
 | } | 
 |  | 
 | static void rate_idx_match_mask(s8 *rate_idx, u16 *rate_flags, | 
 | 				struct ieee80211_supported_band *sband, | 
 | 				enum nl80211_chan_width chan_width, | 
 | 				u32 mask, | 
 | 				u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN], | 
 | 				u16 vht_mask[NL80211_VHT_NSS_MAX]) | 
 | { | 
 | 	if (*rate_flags & IEEE80211_TX_RC_VHT_MCS) { | 
 | 		/* handle VHT rates */ | 
 | 		if (rate_idx_match_vht_mcs_mask(rate_idx, vht_mask)) | 
 | 			return; | 
 |  | 
 | 		*rate_idx = 0; | 
 | 		/* keep protection flags */ | 
 | 		*rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS | | 
 | 				IEEE80211_TX_RC_USE_CTS_PROTECT | | 
 | 				IEEE80211_TX_RC_USE_SHORT_PREAMBLE); | 
 |  | 
 | 		*rate_flags |= IEEE80211_TX_RC_MCS; | 
 | 		if (chan_width == NL80211_CHAN_WIDTH_40) | 
 | 			*rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | 
 |  | 
 | 		if (rate_idx_match_mcs_mask(rate_idx, mcs_mask)) | 
 | 			return; | 
 |  | 
 | 		/* also try the legacy rates. */ | 
 | 		*rate_flags &= ~(IEEE80211_TX_RC_MCS | | 
 | 				 IEEE80211_TX_RC_40_MHZ_WIDTH); | 
 | 		if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates, | 
 | 					       mask)) | 
 | 			return; | 
 | 	} else if (*rate_flags & IEEE80211_TX_RC_MCS) { | 
 | 		/* handle HT rates */ | 
 | 		if (rate_idx_match_mcs_mask(rate_idx, mcs_mask)) | 
 | 			return; | 
 |  | 
 | 		/* also try the legacy rates. */ | 
 | 		*rate_idx = 0; | 
 | 		/* keep protection flags */ | 
 | 		*rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS | | 
 | 				IEEE80211_TX_RC_USE_CTS_PROTECT | | 
 | 				IEEE80211_TX_RC_USE_SHORT_PREAMBLE); | 
 | 		if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates, | 
 | 					       mask)) | 
 | 			return; | 
 | 	} else { | 
 | 		/* handle legacy rates */ | 
 | 		if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates, | 
 | 					       mask)) | 
 | 			return; | 
 |  | 
 | 		/* if HT BSS, and we handle a data frame, also try HT rates */ | 
 | 		switch (chan_width) { | 
 | 		case NL80211_CHAN_WIDTH_20_NOHT: | 
 | 		case NL80211_CHAN_WIDTH_5: | 
 | 		case NL80211_CHAN_WIDTH_10: | 
 | 			return; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		*rate_idx = 0; | 
 | 		/* keep protection flags */ | 
 | 		*rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS | | 
 | 				IEEE80211_TX_RC_USE_CTS_PROTECT | | 
 | 				IEEE80211_TX_RC_USE_SHORT_PREAMBLE); | 
 |  | 
 | 		*rate_flags |= IEEE80211_TX_RC_MCS; | 
 |  | 
 | 		if (chan_width == NL80211_CHAN_WIDTH_40) | 
 | 			*rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | 
 |  | 
 | 		if (rate_idx_match_mcs_mask(rate_idx, mcs_mask)) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Uh.. No suitable rate exists. This should not really happen with | 
 | 	 * sane TX rate mask configurations. However, should someone manage to | 
 | 	 * configure supported rates and TX rate mask in incompatible way, | 
 | 	 * allow the frame to be transmitted with whatever the rate control | 
 | 	 * selected. | 
 | 	 */ | 
 | } | 
 |  | 
 | static void rate_fixup_ratelist(struct ieee80211_vif *vif, | 
 | 				struct ieee80211_supported_band *sband, | 
 | 				struct ieee80211_tx_info *info, | 
 | 				struct ieee80211_tx_rate *rates, | 
 | 				int max_rates) | 
 | { | 
 | 	struct ieee80211_rate *rate; | 
 | 	bool inval = false; | 
 | 	int i; | 
 |  | 
 | 	/* | 
 | 	 * Set up the RTS/CTS rate as the fastest basic rate | 
 | 	 * that is not faster than the data rate unless there | 
 | 	 * is no basic rate slower than the data rate, in which | 
 | 	 * case we pick the slowest basic rate | 
 | 	 * | 
 | 	 * XXX: Should this check all retry rates? | 
 | 	 */ | 
 | 	if (!(rates[0].flags & | 
 | 	      (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS))) { | 
 | 		u32 basic_rates = vif->bss_conf.basic_rates; | 
 | 		s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0; | 
 |  | 
 | 		rate = &sband->bitrates[rates[0].idx]; | 
 |  | 
 | 		for (i = 0; i < sband->n_bitrates; i++) { | 
 | 			/* must be a basic rate */ | 
 | 			if (!(basic_rates & BIT(i))) | 
 | 				continue; | 
 | 			/* must not be faster than the data rate */ | 
 | 			if (sband->bitrates[i].bitrate > rate->bitrate) | 
 | 				continue; | 
 | 			/* maximum */ | 
 | 			if (sband->bitrates[baserate].bitrate < | 
 | 			     sband->bitrates[i].bitrate) | 
 | 				baserate = i; | 
 | 		} | 
 |  | 
 | 		info->control.rts_cts_rate_idx = baserate; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < max_rates; i++) { | 
 | 		/* | 
 | 		 * make sure there's no valid rate following | 
 | 		 * an invalid one, just in case drivers don't | 
 | 		 * take the API seriously to stop at -1. | 
 | 		 */ | 
 | 		if (inval) { | 
 | 			rates[i].idx = -1; | 
 | 			continue; | 
 | 		} | 
 | 		if (rates[i].idx < 0) { | 
 | 			inval = true; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * For now assume MCS is already set up correctly, this | 
 | 		 * needs to be fixed. | 
 | 		 */ | 
 | 		if (rates[i].flags & IEEE80211_TX_RC_MCS) { | 
 | 			WARN_ON(rates[i].idx > 76); | 
 |  | 
 | 			if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) && | 
 | 			    info->control.use_cts_prot) | 
 | 				rates[i].flags |= | 
 | 					IEEE80211_TX_RC_USE_CTS_PROTECT; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (rates[i].flags & IEEE80211_TX_RC_VHT_MCS) { | 
 | 			WARN_ON(ieee80211_rate_get_vht_mcs(&rates[i]) > 9); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* set up RTS protection if desired */ | 
 | 		if (info->control.use_rts) { | 
 | 			rates[i].flags |= IEEE80211_TX_RC_USE_RTS_CTS; | 
 | 			info->control.use_cts_prot = false; | 
 | 		} | 
 |  | 
 | 		/* RC is busted */ | 
 | 		if (WARN_ON_ONCE(rates[i].idx >= sband->n_bitrates)) { | 
 | 			rates[i].idx = -1; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		rate = &sband->bitrates[rates[i].idx]; | 
 |  | 
 | 		/* set up short preamble */ | 
 | 		if (info->control.short_preamble && | 
 | 		    rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) | 
 | 			rates[i].flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; | 
 |  | 
 | 		/* set up G protection */ | 
 | 		if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) && | 
 | 		    info->control.use_cts_prot && | 
 | 		    rate->flags & IEEE80211_RATE_ERP_G) | 
 | 			rates[i].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | static void rate_control_fill_sta_table(struct ieee80211_sta *sta, | 
 | 					struct ieee80211_tx_info *info, | 
 | 					struct ieee80211_tx_rate *rates, | 
 | 					int max_rates) | 
 | { | 
 | 	struct ieee80211_sta_rates *ratetbl = NULL; | 
 | 	int i; | 
 |  | 
 | 	if (sta && !info->control.skip_table) | 
 | 		ratetbl = rcu_dereference(sta->rates); | 
 |  | 
 | 	/* Fill remaining rate slots with data from the sta rate table. */ | 
 | 	max_rates = min_t(int, max_rates, IEEE80211_TX_RATE_TABLE_SIZE); | 
 | 	for (i = 0; i < max_rates; i++) { | 
 | 		if (i < ARRAY_SIZE(info->control.rates) && | 
 | 		    info->control.rates[i].idx >= 0 && | 
 | 		    info->control.rates[i].count) { | 
 | 			if (rates != info->control.rates) | 
 | 				rates[i] = info->control.rates[i]; | 
 | 		} else if (ratetbl) { | 
 | 			rates[i].idx = ratetbl->rate[i].idx; | 
 | 			rates[i].flags = ratetbl->rate[i].flags; | 
 | 			if (info->control.use_rts) | 
 | 				rates[i].count = ratetbl->rate[i].count_rts; | 
 | 			else if (info->control.use_cts_prot) | 
 | 				rates[i].count = ratetbl->rate[i].count_cts; | 
 | 			else | 
 | 				rates[i].count = ratetbl->rate[i].count; | 
 | 		} else { | 
 | 			rates[i].idx = -1; | 
 | 			rates[i].count = 0; | 
 | 		} | 
 |  | 
 | 		if (rates[i].idx < 0 || !rates[i].count) | 
 | 			break; | 
 | 	} | 
 | } | 
 |  | 
 | static bool rate_control_cap_mask(struct ieee80211_sub_if_data *sdata, | 
 | 				  struct ieee80211_supported_band *sband, | 
 | 				  struct ieee80211_sta *sta, u32 *mask, | 
 | 				  u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN], | 
 | 				  u16 vht_mask[NL80211_VHT_NSS_MAX]) | 
 | { | 
 | 	u32 i, flags; | 
 |  | 
 | 	*mask = sdata->rc_rateidx_mask[sband->band]; | 
 | 	flags = ieee80211_chandef_rate_flags(&sdata->vif.bss_conf.chandef); | 
 | 	for (i = 0; i < sband->n_bitrates; i++) { | 
 | 		if ((flags & sband->bitrates[i].flags) != flags) | 
 | 			*mask &= ~BIT(i); | 
 | 	} | 
 |  | 
 | 	if (*mask == (1 << sband->n_bitrates) - 1 && | 
 | 	    !sdata->rc_has_mcs_mask[sband->band] && | 
 | 	    !sdata->rc_has_vht_mcs_mask[sband->band]) | 
 | 		return false; | 
 |  | 
 | 	if (sdata->rc_has_mcs_mask[sband->band]) | 
 | 		memcpy(mcs_mask, sdata->rc_rateidx_mcs_mask[sband->band], | 
 | 		       IEEE80211_HT_MCS_MASK_LEN); | 
 | 	else | 
 | 		memset(mcs_mask, 0xff, IEEE80211_HT_MCS_MASK_LEN); | 
 |  | 
 | 	if (sdata->rc_has_vht_mcs_mask[sband->band]) | 
 | 		memcpy(vht_mask, sdata->rc_rateidx_vht_mcs_mask[sband->band], | 
 | 		       sizeof(u16) * NL80211_VHT_NSS_MAX); | 
 | 	else | 
 | 		memset(vht_mask, 0xff, sizeof(u16) * NL80211_VHT_NSS_MAX); | 
 |  | 
 | 	if (sta) { | 
 | 		__le16 sta_vht_cap; | 
 | 		u16 sta_vht_mask[NL80211_VHT_NSS_MAX]; | 
 |  | 
 | 		/* Filter out rates that the STA does not support */ | 
 | 		*mask &= sta->supp_rates[sband->band]; | 
 | 		for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) | 
 | 			mcs_mask[i] &= sta->ht_cap.mcs.rx_mask[i]; | 
 |  | 
 | 		sta_vht_cap = sta->vht_cap.vht_mcs.rx_mcs_map; | 
 | 		ieee80211_get_vht_mask_from_cap(sta_vht_cap, sta_vht_mask); | 
 | 		for (i = 0; i < NL80211_VHT_NSS_MAX; i++) | 
 | 			vht_mask[i] &= sta_vht_mask[i]; | 
 | 	} | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | static void | 
 | rate_control_apply_mask_ratetbl(struct sta_info *sta, | 
 | 				struct ieee80211_supported_band *sband, | 
 | 				struct ieee80211_sta_rates *rates) | 
 | { | 
 | 	int i; | 
 | 	u32 mask; | 
 | 	u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; | 
 | 	u16 vht_mask[NL80211_VHT_NSS_MAX]; | 
 | 	enum nl80211_chan_width chan_width; | 
 |  | 
 | 	if (!rate_control_cap_mask(sta->sdata, sband, &sta->sta, &mask, | 
 | 				   mcs_mask, vht_mask)) | 
 | 		return; | 
 |  | 
 | 	chan_width = sta->sdata->vif.bss_conf.chandef.width; | 
 | 	for (i = 0; i < IEEE80211_TX_RATE_TABLE_SIZE; i++) { | 
 | 		if (rates->rate[i].idx < 0) | 
 | 			break; | 
 |  | 
 | 		rate_idx_match_mask(&rates->rate[i].idx, &rates->rate[i].flags, | 
 | 				    sband, chan_width, mask, mcs_mask, | 
 | 				    vht_mask); | 
 | 	} | 
 | } | 
 |  | 
 | static void rate_control_apply_mask(struct ieee80211_sub_if_data *sdata, | 
 | 				    struct ieee80211_sta *sta, | 
 | 				    struct ieee80211_supported_band *sband, | 
 | 				    struct ieee80211_tx_rate *rates, | 
 | 				    int max_rates) | 
 | { | 
 | 	enum nl80211_chan_width chan_width; | 
 | 	u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; | 
 | 	u32 mask; | 
 | 	u16 rate_flags, vht_mask[NL80211_VHT_NSS_MAX]; | 
 | 	int i; | 
 |  | 
 | 	/* | 
 | 	 * Try to enforce the rateidx mask the user wanted. skip this if the | 
 | 	 * default mask (allow all rates) is used to save some processing for | 
 | 	 * the common case. | 
 | 	 */ | 
 | 	if (!rate_control_cap_mask(sdata, sband, sta, &mask, mcs_mask, | 
 | 				   vht_mask)) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * Make sure the rate index selected for each TX rate is | 
 | 	 * included in the configured mask and change the rate indexes | 
 | 	 * if needed. | 
 | 	 */ | 
 | 	chan_width = sdata->vif.bss_conf.chandef.width; | 
 | 	for (i = 0; i < max_rates; i++) { | 
 | 		/* Skip invalid rates */ | 
 | 		if (rates[i].idx < 0) | 
 | 			break; | 
 |  | 
 | 		rate_flags = rates[i].flags; | 
 | 		rate_idx_match_mask(&rates[i].idx, &rate_flags, sband, | 
 | 				    chan_width, mask, mcs_mask, vht_mask); | 
 | 		rates[i].flags = rate_flags; | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_get_tx_rates(struct ieee80211_vif *vif, | 
 | 			    struct ieee80211_sta *sta, | 
 | 			    struct sk_buff *skb, | 
 | 			    struct ieee80211_tx_rate *dest, | 
 | 			    int max_rates) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	struct ieee80211_supported_band *sband; | 
 |  | 
 | 	rate_control_fill_sta_table(sta, info, dest, max_rates); | 
 |  | 
 | 	if (!vif) | 
 | 		return; | 
 |  | 
 | 	sdata = vif_to_sdata(vif); | 
 | 	sband = sdata->local->hw.wiphy->bands[info->band]; | 
 |  | 
 | 	if (ieee80211_is_data(hdr->frame_control)) | 
 | 		rate_control_apply_mask(sdata, sta, sband, dest, max_rates); | 
 |  | 
 | 	if (dest[0].idx < 0) | 
 | 		__rate_control_send_low(&sdata->local->hw, sband, sta, info, | 
 | 					sdata->rc_rateidx_mask[info->band]); | 
 |  | 
 | 	if (sta) | 
 | 		rate_fixup_ratelist(vif, sband, info, dest, max_rates); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_get_tx_rates); | 
 |  | 
 | void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, | 
 | 			   struct sta_info *sta, | 
 | 			   struct ieee80211_tx_rate_control *txrc) | 
 | { | 
 | 	struct rate_control_ref *ref = sdata->local->rate_ctrl; | 
 | 	void *priv_sta = NULL; | 
 | 	struct ieee80211_sta *ista = NULL; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); | 
 | 	int i; | 
 |  | 
 | 	if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) { | 
 | 		ista = &sta->sta; | 
 | 		priv_sta = sta->rate_ctrl_priv; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | 
 | 		info->control.rates[i].idx = -1; | 
 | 		info->control.rates[i].flags = 0; | 
 | 		info->control.rates[i].count = 0; | 
 | 	} | 
 |  | 
 | 	if (ieee80211_hw_check(&sdata->local->hw, HAS_RATE_CONTROL)) | 
 | 		return; | 
 |  | 
 | 	if (ista) { | 
 | 		spin_lock_bh(&sta->rate_ctrl_lock); | 
 | 		ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); | 
 | 		spin_unlock_bh(&sta->rate_ctrl_lock); | 
 | 	} else { | 
 | 		ref->ops->get_rate(ref->priv, NULL, NULL, txrc); | 
 | 	} | 
 |  | 
 | 	if (ieee80211_hw_check(&sdata->local->hw, SUPPORTS_RC_TABLE)) | 
 | 		return; | 
 |  | 
 | 	ieee80211_get_tx_rates(&sdata->vif, ista, txrc->skb, | 
 | 			       info->control.rates, | 
 | 			       ARRAY_SIZE(info->control.rates)); | 
 | } | 
 |  | 
 | int rate_control_set_rates(struct ieee80211_hw *hw, | 
 | 			   struct ieee80211_sta *pubsta, | 
 | 			   struct ieee80211_sta_rates *rates) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	struct ieee80211_sta_rates *old; | 
 | 	struct ieee80211_supported_band *sband; | 
 |  | 
 | 	sband = ieee80211_get_sband(sta->sdata); | 
 | 	if (!sband) | 
 | 		return -EINVAL; | 
 | 	rate_control_apply_mask_ratetbl(sta, sband, rates); | 
 | 	/* | 
 | 	 * mac80211 guarantees that this function will not be called | 
 | 	 * concurrently, so the following RCU access is safe, even without | 
 | 	 * extra locking. This can not be checked easily, so we just set | 
 | 	 * the condition to true. | 
 | 	 */ | 
 | 	old = rcu_dereference_protected(pubsta->rates, true); | 
 | 	rcu_assign_pointer(pubsta->rates, rates); | 
 | 	if (old) | 
 | 		kfree_rcu(old, rcu_head); | 
 |  | 
 | 	drv_sta_rate_tbl_update(hw_to_local(hw), sta->sdata, pubsta); | 
 |  | 
 | 	ieee80211_sta_set_expected_throughput(pubsta, sta_get_expected_throughput(sta)); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(rate_control_set_rates); | 
 |  | 
 | int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local, | 
 | 				 const char *name) | 
 | { | 
 | 	struct rate_control_ref *ref; | 
 |  | 
 | 	ASSERT_RTNL(); | 
 |  | 
 | 	if (local->open_count) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) { | 
 | 		if (WARN_ON(!local->ops->set_rts_threshold)) | 
 | 			return -EINVAL; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	ref = rate_control_alloc(name, local); | 
 | 	if (!ref) { | 
 | 		wiphy_warn(local->hw.wiphy, | 
 | 			   "Failed to select rate control algorithm\n"); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	WARN_ON(local->rate_ctrl); | 
 | 	local->rate_ctrl = ref; | 
 |  | 
 | 	wiphy_debug(local->hw.wiphy, "Selected rate control algorithm '%s'\n", | 
 | 		    ref->ops->name); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void rate_control_deinitialize(struct ieee80211_local *local) | 
 | { | 
 | 	struct rate_control_ref *ref; | 
 |  | 
 | 	ref = local->rate_ctrl; | 
 |  | 
 | 	if (!ref) | 
 | 		return; | 
 |  | 
 | 	local->rate_ctrl = NULL; | 
 | 	rate_control_free(local, ref); | 
 | } |