Squashed 'LYNQ_PUBLIC/' content from commit 79d8f932f
git-subtree-dir: LYNQ_PUBLIC
git-subtree-split: 79d8f932fb4ebc4b5aec6c5ace97634912394272
Change-Id: If2527ba937f56fe989487bf71e996f7cfd9fbe61
diff --git a/common_src/lib/liblynq-data/include/libdata/lynq_data.h b/common_src/lib/liblynq-data/include/libdata/lynq_data.h
new file mode 100755
index 0000000..3f065f0
--- /dev/null
+++ b/common_src/lib/liblynq-data/include/libdata/lynq_data.h
@@ -0,0 +1,74 @@
+#ifndef LYNQ_DATA_H
+#define LYNQ_DATA_H 1
+#ifdef __cplusplus
+extern "C" {
+#endif
+#define LYNQ_APN_CHANNEL_MAX 10
+#define LYNQ_PDP_TYPE_MAX_LEN 16
+#define LYNQ_IFACE_NAME_MAX_LEN 50
+#define LYNQ_APN_MAX_LEN 50
+#define LYNQ_APN_TYPE_MAX_LEN 50
+#define LYNQ_PDP_ADDR_MAX_LEN 64
+#define LYNQ_DNS_ADDR_MAX_LEN 256
+#define LYNQ_GETWAYS_ADDR_MAX_LEN 64
+#define LYNQ_POXY_ADDR_MAX_LEN 64
+
+typedef struct {
+ int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
+ int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
+ back-off timer value RIL wants to override the one
+ pre-configured in FW.
+ The unit is miliseconds.
+ The value < 0 means no value is suggested.
+ The value 0 means retry should be done ASAP.
+ The value of INT_MAX(0x7fffffff) means no retry. */
+ int cid; /* Context ID, uniquely identifies this call */
+ int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+ char type[LYNQ_PDP_TYPE_MAX_LEN]; /* One of the PDP_type values in TS 27.007 section 10.1.1.
+ For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
+ PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
+ such as "IP" or "IPV6" */
+ char ifname[LYNQ_IFACE_NAME_MAX_LEN]; /* The network interface name */
+ char addresses[LYNQ_PDP_ADDR_MAX_LEN]; /* A space-delimited list of addresses with optional "/" prefix length,
+ e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+ May not be empty, typically 1 IPv4 or 1 IPv6 or
+ one of each. If the prefix length is absent the addresses
+ are assumed to be point to point with IPv4 having a prefix
+ length of 32 and IPv6 128. */
+ char dnses[LYNQ_DNS_ADDR_MAX_LEN]; /* A space-delimited list of DNS server addresses,
+ e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ May be empty. */
+ char gateways[LYNQ_GETWAYS_ADDR_MAX_LEN]; /* A space-delimited list of default gateway addresses,
+ e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ May be empty in which case the addresses represent point
+ to point connections. */
+ char pcscf[LYNQ_POXY_ADDR_MAX_LEN]; /* the Proxy Call State Control Function address
+ via PCO(Protocol Configuration Option) for IMS client. */
+ int mtu; /* MTU received from network
+ Value <= 0 means network has either not sent a value or
+ sent an invalid value */
+} lynq_data_call_response_v11_t;
+typedef struct
+{
+ int handle;
+ char apn[LYNQ_APN_MAX_LEN];
+ char apnType[LYNQ_APN_TYPE_MAX_LEN];
+}lynq_apn_msg_t;
+
+int lynq_init_data(int uToken);
+int lynq_deinit_data();
+int lynq_setup_data_call(int *handle);
+int lynq_deactive_data_call(int *handle);
+int lynq_setup_data_call_sp(int *handle,char *apn,char *apnType,char *user,char *password,char *authType,char *normalProtocol,char *roamingProtocol);
+//int lynq_deactive_data_call_sp(int *handle,char *apnType);
+int lynq_get_data_call_list(int *handle,lynq_data_call_response_v11_t *dataCallList);
+int lynq_wait_data_call_state_change(int *handle);
+int lynq_modify_apn_db(const int cmd,char *id,char *mcc,char *mnc,char *apn,char *apntype,char *user,char *password,char *normalprotocol,char *roamingprotocol,char *carrier,char *out);
+int lynq_reset_apn(char *result);
+int lynq_get_apn_msg(int handle,lynq_apn_msg_t *apn_msg);
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif