| /* | 
 |  * Core driver for the generic pin config portions of the pin control subsystem | 
 |  * | 
 |  * Copyright (C) 2011 ST-Ericsson SA | 
 |  * Written on behalf of Linaro for ST-Ericsson | 
 |  * | 
 |  * Author: Linus Walleij <linus.walleij@linaro.org> | 
 |  * | 
 |  * License terms: GNU General Public License (GPL) version 2 | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "generic pinconfig core: " fmt | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/device.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/debugfs.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/pinctrl/pinctrl.h> | 
 | #include <linux/pinctrl/pinconf.h> | 
 | #include <linux/pinctrl/pinconf-generic.h> | 
 | #include <linux/of.h> | 
 | #include "core.h" | 
 | #include "pinconf.h" | 
 | #include "pinctrl-utils.h" | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 | static const struct pin_config_item conf_items[] = { | 
 | 	PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, | 
 | 				"input bias pull to pin specific state", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA", true), | 
 | 	PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "usec", true), | 
 | 	PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true), | 
 | 	PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), | 
 | 	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), | 
 | 	PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), | 
 | 	PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), | 
 | 	PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay", NULL, true), | 
 | }; | 
 |  | 
 | static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev, | 
 | 				     struct seq_file *s, const char *gname, | 
 | 				     unsigned pin, | 
 | 				     const struct pin_config_item *items, | 
 | 				     int nitems, int *print_sep) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < nitems; i++) { | 
 | 		unsigned long config; | 
 | 		int ret; | 
 |  | 
 | 		/* We want to check out this parameter */ | 
 | 		config = pinconf_to_config_packed(items[i].param, 0); | 
 | 		if (gname) | 
 | 			ret = pin_config_group_get(dev_name(pctldev->dev), | 
 | 						   gname, &config); | 
 | 		else | 
 | 			ret = pin_config_get_for_pin(pctldev, pin, &config); | 
 | 		/* These are legal errors */ | 
 | 		if (ret == -EINVAL || ret == -ENOTSUPP) | 
 | 			continue; | 
 | 		if (ret) { | 
 | 			seq_printf(s, "ERROR READING CONFIG SETTING %d ", i); | 
 | 			continue; | 
 | 		} | 
 | 		/* comma between multiple configs */ | 
 | 		if (*print_sep) | 
 | 			seq_puts(s, ", "); | 
 | 		*print_sep = 1; | 
 | 		seq_puts(s, items[i].display); | 
 | 		/* Print unit if available */ | 
 | 		if (items[i].has_arg) { | 
 | 			seq_printf(s, " (%u", | 
 | 				   pinconf_to_config_argument(config)); | 
 | 			if (items[i].format) | 
 | 				seq_printf(s, " %s)", items[i].format); | 
 | 			else | 
 | 				seq_puts(s, ")"); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * pinconf_generic_dump_pins - Print information about pin or group of pins | 
 |  * @pctldev:	Pincontrol device | 
 |  * @s:		File to print to | 
 |  * @gname:	Group name specifying pins | 
 |  * @pin:	Pin number specyfying pin | 
 |  * | 
 |  * Print the pinconf configuration for the requested pin(s) to @s. Pins can be | 
 |  * specified either by pin using @pin or by group using @gname. Only one needs | 
 |  * to be specified the other can be NULL/0. | 
 |  */ | 
 | void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s, | 
 | 			       const char *gname, unsigned pin) | 
 | { | 
 | 	const struct pinconf_ops *ops = pctldev->desc->confops; | 
 | 	int print_sep = 0; | 
 |  | 
 | 	if (!ops->is_generic) | 
 | 		return; | 
 |  | 
 | 	/* generic parameters */ | 
 | 	pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items, | 
 | 				 ARRAY_SIZE(conf_items), &print_sep); | 
 | 	/* driver-specific parameters */ | 
 | 	if (pctldev->desc->num_custom_params && | 
 | 	    pctldev->desc->custom_conf_items) | 
 | 		pinconf_generic_dump_one(pctldev, s, gname, pin, | 
 | 					 pctldev->desc->custom_conf_items, | 
 | 					 pctldev->desc->num_custom_params, | 
 | 					 &print_sep); | 
 | } | 
 |  | 
 | void pinconf_generic_dump_config(struct pinctrl_dev *pctldev, | 
 | 				 struct seq_file *s, unsigned long config) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(conf_items); i++) { | 
 | 		if (pinconf_to_config_param(config) != conf_items[i].param) | 
 | 			continue; | 
 | 		seq_printf(s, "%s: 0x%x", conf_items[i].display, | 
 | 			   pinconf_to_config_argument(config)); | 
 | 	} | 
 |  | 
 | 	if (!pctldev->desc->num_custom_params || | 
 | 	    !pctldev->desc->custom_conf_items) | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i < pctldev->desc->num_custom_params; i++) { | 
 | 		if (pinconf_to_config_param(config) != | 
 | 		    pctldev->desc->custom_conf_items[i].param) | 
 | 			continue; | 
 | 		seq_printf(s, "%s: 0x%x", | 
 | 				pctldev->desc->custom_conf_items[i].display, | 
 | 				pinconf_to_config_argument(config)); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL_GPL(pinconf_generic_dump_config); | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct pinconf_generic_params dt_params[] = { | 
 | 	{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, | 
 | 	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, | 
 | 	{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 }, | 
 | 	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, | 
 | 	{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, | 
 | 	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, | 
 | 	{ "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 }, | 
 | 	{ "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 }, | 
 | 	{ "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 }, | 
 | 	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, | 
 | 	{ "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 }, | 
 | 	{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 }, | 
 | 	{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 }, | 
 | 	{ "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 }, | 
 | 	{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, | 
 | 	{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, | 
 | 	{ "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, | 
 | 	{ "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, | 
 | 	{ "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, | 
 | 	{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, | 
 | 	{ "output-high", PIN_CONFIG_OUTPUT, 1, }, | 
 | 	{ "output-low", PIN_CONFIG_OUTPUT, 0, }, | 
 | 	{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, | 
 | 	{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, | 
 | 	{ "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, | 
 | 	{ "skew-delay", PIN_CONFIG_SKEW_DELAY, 0 }, | 
 | }; | 
 |  | 
 | /** | 
 |  * parse_dt_cfg() - Parse DT pinconf parameters | 
 |  * @np:	DT node | 
 |  * @params:	Array of describing generic parameters | 
 |  * @count:	Number of entries in @params | 
 |  * @cfg:	Array of parsed config options | 
 |  * @ncfg:	Number of entries in @cfg | 
 |  * | 
 |  * Parse the config options described in @params from @np and puts the result | 
 |  * in @cfg. @cfg does not need to be empty, entries are added beginning at | 
 |  * @ncfg. @ncfg is updated to reflect the number of entries after parsing. @cfg | 
 |  * needs to have enough memory allocated to hold all possible entries. | 
 |  */ | 
 | static void parse_dt_cfg(struct device_node *np, | 
 | 			 const struct pinconf_generic_params *params, | 
 | 			 unsigned int count, unsigned long *cfg, | 
 | 			 unsigned int *ncfg) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < count; i++) { | 
 | 		u32 val; | 
 | 		int ret; | 
 | 		const struct pinconf_generic_params *par = ¶ms[i]; | 
 |  | 
 | 		ret = of_property_read_u32(np, par->property, &val); | 
 |  | 
 | 		/* property not found */ | 
 | 		if (ret == -EINVAL) | 
 | 			continue; | 
 |  | 
 | 		/* use default value, when no value is specified */ | 
 | 		if (ret) | 
 | 			val = par->default_value; | 
 |  | 
 | 		pr_debug("found %s with value %u\n", par->property, val); | 
 | 		cfg[*ncfg] = pinconf_to_config_packed(par->param, val); | 
 | 		(*ncfg)++; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * pinconf_generic_parse_dt_config() | 
 |  * parse the config properties into generic pinconfig values. | 
 |  * @np: node containing the pinconfig properties | 
 |  * @configs: array with nconfigs entries containing the generic pinconf values | 
 |  *           must be freed when no longer necessary. | 
 |  * @nconfigs: umber of configurations | 
 |  */ | 
 | int pinconf_generic_parse_dt_config(struct device_node *np, | 
 | 				    struct pinctrl_dev *pctldev, | 
 | 				    unsigned long **configs, | 
 | 				    unsigned int *nconfigs) | 
 | { | 
 | 	unsigned long *cfg; | 
 | 	unsigned int max_cfg, ncfg = 0; | 
 | 	int ret; | 
 |  | 
 | 	if (!np) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* allocate a temporary array big enough to hold one of each option */ | 
 | 	max_cfg = ARRAY_SIZE(dt_params); | 
 | 	if (pctldev) | 
 | 		max_cfg += pctldev->desc->num_custom_params; | 
 | 	cfg = kcalloc(max_cfg, sizeof(*cfg), GFP_KERNEL); | 
 | 	if (!cfg) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg); | 
 | 	if (pctldev && pctldev->desc->num_custom_params && | 
 | 		pctldev->desc->custom_params) | 
 | 		parse_dt_cfg(np, pctldev->desc->custom_params, | 
 | 			     pctldev->desc->num_custom_params, cfg, &ncfg); | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | 	/* no configs found at all */ | 
 | 	if (ncfg == 0) { | 
 | 		*configs = NULL; | 
 | 		*nconfigs = 0; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Now limit the number of configs to the real number of | 
 | 	 * found properties. | 
 | 	 */ | 
 | 	*configs = kmemdup(cfg, ncfg * sizeof(unsigned long), GFP_KERNEL); | 
 | 	if (!*configs) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	*nconfigs = ncfg; | 
 |  | 
 | out: | 
 | 	kfree(cfg); | 
 | 	return ret; | 
 | } | 
 |  | 
 | int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev, | 
 | 		struct device_node *np, struct pinctrl_map **map, | 
 | 		unsigned *reserved_maps, unsigned *num_maps, | 
 | 		enum pinctrl_map_type type) | 
 | { | 
 | 	int ret; | 
 | 	const char *function; | 
 | 	struct device *dev = pctldev->dev; | 
 | 	unsigned long *configs = NULL; | 
 | 	unsigned num_configs = 0; | 
 | 	unsigned reserve, strings_count; | 
 | 	struct property *prop; | 
 | 	const char *group; | 
 | 	const char *subnode_target_type = "pins"; | 
 |  | 
 | 	ret = of_property_count_strings(np, "pins"); | 
 | 	if (ret < 0) { | 
 | 		ret = of_property_count_strings(np, "groups"); | 
 | 		if (ret < 0) | 
 | 			/* skip this node; may contain config child nodes */ | 
 | 			return 0; | 
 | 		if (type == PIN_MAP_TYPE_INVALID) | 
 | 			type = PIN_MAP_TYPE_CONFIGS_GROUP; | 
 | 		subnode_target_type = "groups"; | 
 | 	} else { | 
 | 		if (type == PIN_MAP_TYPE_INVALID) | 
 | 			type = PIN_MAP_TYPE_CONFIGS_PIN; | 
 | 	} | 
 | 	strings_count = ret; | 
 |  | 
 | 	ret = of_property_read_string(np, "function", &function); | 
 | 	if (ret < 0) { | 
 | 		/* EINVAL=missing, which is fine since it's optional */ | 
 | 		if (ret != -EINVAL) | 
 | 			dev_err(dev, "%pOF: could not parse property function\n", | 
 | 				np); | 
 | 		function = NULL; | 
 | 	} | 
 |  | 
 | 	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, | 
 | 					      &num_configs); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%pOF: could not parse node property\n", np); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	reserve = 0; | 
 | 	if (function != NULL) | 
 | 		reserve++; | 
 | 	if (num_configs) | 
 | 		reserve++; | 
 |  | 
 | 	reserve *= strings_count; | 
 |  | 
 | 	ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, | 
 | 			num_maps, reserve); | 
 | 	if (ret < 0) | 
 | 		goto exit; | 
 |  | 
 | 	of_property_for_each_string(np, subnode_target_type, prop, group) { | 
 | 		if (function) { | 
 | 			ret = pinctrl_utils_add_map_mux(pctldev, map, | 
 | 					reserved_maps, num_maps, group, | 
 | 					function); | 
 | 			if (ret < 0) | 
 | 				goto exit; | 
 | 		} | 
 |  | 
 | 		if (num_configs) { | 
 | 			ret = pinctrl_utils_add_map_configs(pctldev, map, | 
 | 					reserved_maps, num_maps, group, configs, | 
 | 					num_configs, type); | 
 | 			if (ret < 0) | 
 | 				goto exit; | 
 | 		} | 
 | 	} | 
 | 	ret = 0; | 
 |  | 
 | exit: | 
 | 	kfree(configs); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(pinconf_generic_dt_subnode_to_map); | 
 |  | 
 | int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev, | 
 | 		struct device_node *np_config, struct pinctrl_map **map, | 
 | 		unsigned *num_maps, enum pinctrl_map_type type) | 
 | { | 
 | 	unsigned reserved_maps; | 
 | 	struct device_node *np; | 
 | 	int ret; | 
 |  | 
 | 	reserved_maps = 0; | 
 | 	*map = NULL; | 
 | 	*num_maps = 0; | 
 |  | 
 | 	ret = pinconf_generic_dt_subnode_to_map(pctldev, np_config, map, | 
 | 						&reserved_maps, num_maps, type); | 
 | 	if (ret < 0) | 
 | 		goto exit; | 
 |  | 
 | 	for_each_available_child_of_node(np_config, np) { | 
 | 		ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map, | 
 | 					&reserved_maps, num_maps, type); | 
 | 		if (ret < 0) | 
 | 			goto exit; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | exit: | 
 | 	pinctrl_utils_free_map(pctldev, *map, *num_maps); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(pinconf_generic_dt_node_to_map); | 
 |  | 
 | void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev, | 
 | 				 struct pinctrl_map *map, | 
 | 				 unsigned num_maps) | 
 | { | 
 | 	pinctrl_utils_free_map(pctldev, map, num_maps); | 
 | } | 
 | EXPORT_SYMBOL_GPL(pinconf_generic_dt_free_map); | 
 |  | 
 | #endif |