| /* | 
 |  * Reset driver for NXP LPC18xx/43xx Reset Generation Unit (RGU). | 
 |  * | 
 |  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/err.h> | 
 | #include <linux/io.h> | 
 | #include <linux/init.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/reset-controller.h> | 
 | #include <linux/spinlock.h> | 
 |  | 
 | /* LPC18xx RGU registers */ | 
 | #define LPC18XX_RGU_CTRL0		0x100 | 
 | #define LPC18XX_RGU_CTRL1		0x104 | 
 | #define LPC18XX_RGU_ACTIVE_STATUS0	0x150 | 
 | #define LPC18XX_RGU_ACTIVE_STATUS1	0x154 | 
 |  | 
 | #define LPC18XX_RGU_RESETS_PER_REG	32 | 
 |  | 
 | /* Internal reset outputs */ | 
 | #define LPC18XX_RGU_CORE_RST	0 | 
 | #define LPC43XX_RGU_M0SUB_RST	12 | 
 | #define LPC43XX_RGU_M0APP_RST	56 | 
 |  | 
 | struct lpc18xx_rgu_data { | 
 | 	struct reset_controller_dev rcdev; | 
 | 	struct notifier_block restart_nb; | 
 | 	struct clk *clk_delay; | 
 | 	struct clk *clk_reg; | 
 | 	void __iomem *base; | 
 | 	spinlock_t lock; | 
 | 	u32 delay_us; | 
 | }; | 
 |  | 
 | #define to_rgu_data(p) container_of(p, struct lpc18xx_rgu_data, rcdev) | 
 |  | 
 | static int lpc18xx_rgu_restart(struct notifier_block *nb, unsigned long mode, | 
 | 			       void *cmd) | 
 | { | 
 | 	struct lpc18xx_rgu_data *rc = container_of(nb, struct lpc18xx_rgu_data, | 
 | 						   restart_nb); | 
 |  | 
 | 	writel(BIT(LPC18XX_RGU_CORE_RST), rc->base + LPC18XX_RGU_CTRL0); | 
 | 	mdelay(2000); | 
 |  | 
 | 	pr_emerg("%s: unable to restart system\n", __func__); | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | /* | 
 |  * The LPC18xx RGU has mostly self-deasserting resets except for the | 
 |  * two reset lines going to the internal Cortex-M0 cores. | 
 |  * | 
 |  * To prevent the M0 core resets from accidentally getting deasserted | 
 |  * status register must be check and bits in control register set to | 
 |  * preserve the state. | 
 |  */ | 
 | static int lpc18xx_rgu_setclear_reset(struct reset_controller_dev *rcdev, | 
 | 				      unsigned long id, bool set) | 
 | { | 
 | 	struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); | 
 | 	u32 stat_offset = LPC18XX_RGU_ACTIVE_STATUS0; | 
 | 	u32 ctrl_offset = LPC18XX_RGU_CTRL0; | 
 | 	unsigned long flags; | 
 | 	u32 stat, rst_bit; | 
 |  | 
 | 	stat_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); | 
 | 	ctrl_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); | 
 | 	rst_bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG); | 
 |  | 
 | 	spin_lock_irqsave(&rc->lock, flags); | 
 | 	stat = ~readl(rc->base + stat_offset); | 
 | 	if (set) | 
 | 		writel(stat | rst_bit, rc->base + ctrl_offset); | 
 | 	else | 
 | 		writel(stat & ~rst_bit, rc->base + ctrl_offset); | 
 | 	spin_unlock_irqrestore(&rc->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int lpc18xx_rgu_assert(struct reset_controller_dev *rcdev, | 
 | 			      unsigned long id) | 
 | { | 
 | 	return lpc18xx_rgu_setclear_reset(rcdev, id, true); | 
 | } | 
 |  | 
 | static int lpc18xx_rgu_deassert(struct reset_controller_dev *rcdev, | 
 | 				unsigned long id) | 
 | { | 
 | 	return lpc18xx_rgu_setclear_reset(rcdev, id, false); | 
 | } | 
 |  | 
 | /* Only M0 cores require explicit reset deassert */ | 
 | static int lpc18xx_rgu_reset(struct reset_controller_dev *rcdev, | 
 | 			     unsigned long id) | 
 | { | 
 | 	struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); | 
 |  | 
 | 	lpc18xx_rgu_assert(rcdev, id); | 
 | 	udelay(rc->delay_us); | 
 |  | 
 | 	switch (id) { | 
 | 	case LPC43XX_RGU_M0SUB_RST: | 
 | 	case LPC43XX_RGU_M0APP_RST: | 
 | 		lpc18xx_rgu_setclear_reset(rcdev, id, false); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int lpc18xx_rgu_status(struct reset_controller_dev *rcdev, | 
 | 			      unsigned long id) | 
 | { | 
 | 	struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); | 
 | 	u32 bit, offset = LPC18XX_RGU_ACTIVE_STATUS0; | 
 |  | 
 | 	offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); | 
 | 	bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG); | 
 |  | 
 | 	return !(readl(rc->base + offset) & bit); | 
 | } | 
 |  | 
 | static const struct reset_control_ops lpc18xx_rgu_ops = { | 
 | 	.reset		= lpc18xx_rgu_reset, | 
 | 	.assert		= lpc18xx_rgu_assert, | 
 | 	.deassert	= lpc18xx_rgu_deassert, | 
 | 	.status		= lpc18xx_rgu_status, | 
 | }; | 
 |  | 
 | static int lpc18xx_rgu_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct lpc18xx_rgu_data *rc; | 
 | 	struct resource *res; | 
 | 	u32 fcclk, firc; | 
 | 	int ret; | 
 |  | 
 | 	rc = devm_kzalloc(&pdev->dev, sizeof(*rc), GFP_KERNEL); | 
 | 	if (!rc) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	rc->base = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(rc->base)) | 
 | 		return PTR_ERR(rc->base); | 
 |  | 
 | 	rc->clk_reg = devm_clk_get(&pdev->dev, "reg"); | 
 | 	if (IS_ERR(rc->clk_reg)) { | 
 | 		dev_err(&pdev->dev, "reg clock not found\n"); | 
 | 		return PTR_ERR(rc->clk_reg); | 
 | 	} | 
 |  | 
 | 	rc->clk_delay = devm_clk_get(&pdev->dev, "delay"); | 
 | 	if (IS_ERR(rc->clk_delay)) { | 
 | 		dev_err(&pdev->dev, "delay clock not found\n"); | 
 | 		return PTR_ERR(rc->clk_delay); | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(rc->clk_reg); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "unable to enable reg clock\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(rc->clk_delay); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "unable to enable delay clock\n"); | 
 | 		goto dis_clk_reg; | 
 | 	} | 
 |  | 
 | 	fcclk = clk_get_rate(rc->clk_reg) / USEC_PER_SEC; | 
 | 	firc = clk_get_rate(rc->clk_delay) / USEC_PER_SEC; | 
 | 	if (fcclk == 0 || firc == 0) | 
 | 		rc->delay_us = 2; | 
 | 	else | 
 | 		rc->delay_us = DIV_ROUND_UP(fcclk, firc * firc); | 
 |  | 
 | 	spin_lock_init(&rc->lock); | 
 |  | 
 | 	rc->rcdev.owner = THIS_MODULE; | 
 | 	rc->rcdev.nr_resets = 64; | 
 | 	rc->rcdev.ops = &lpc18xx_rgu_ops; | 
 | 	rc->rcdev.of_node = pdev->dev.of_node; | 
 |  | 
 | 	platform_set_drvdata(pdev, rc); | 
 |  | 
 | 	ret = reset_controller_register(&rc->rcdev); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "unable to register device\n"); | 
 | 		goto dis_clks; | 
 | 	} | 
 |  | 
 | 	rc->restart_nb.priority = 192, | 
 | 	rc->restart_nb.notifier_call = lpc18xx_rgu_restart, | 
 | 	ret = register_restart_handler(&rc->restart_nb); | 
 | 	if (ret) | 
 | 		dev_warn(&pdev->dev, "failed to register restart handler\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | dis_clks: | 
 | 	clk_disable_unprepare(rc->clk_delay); | 
 | dis_clk_reg: | 
 | 	clk_disable_unprepare(rc->clk_reg); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct of_device_id lpc18xx_rgu_match[] = { | 
 | 	{ .compatible = "nxp,lpc1850-rgu" }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | static struct platform_driver lpc18xx_rgu_driver = { | 
 | 	.probe	= lpc18xx_rgu_probe, | 
 | 	.driver	= { | 
 | 		.name			= "lpc18xx-reset", | 
 | 		.of_match_table		= lpc18xx_rgu_match, | 
 | 		.suppress_bind_attrs	= true, | 
 | 	}, | 
 | }; | 
 | builtin_platform_driver(lpc18xx_rgu_driver); |