| // SPDX-License-Identifier: GPL-2.0 | 
 | // | 
 | // (C) 2006 Thomas Gleixner <tglx@linutronix.de> | 
 | // | 
 | // Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/types.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/list.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/init.h> | 
 | #include <linux/serial_core.h> | 
 | #include <linux/serial_s3c.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/io.h> | 
 | #include <linux/mtd/mtd.h> | 
 | #include <linux/mtd/rawnand.h> | 
 | #include <linux/mtd/nand_ecc.h> | 
 | #include <linux/mtd/partitions.h> | 
 | #include <linux/memblock.h> | 
 |  | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/map.h> | 
 | #include <asm/mach/irq.h> | 
 |  | 
 | #include <mach/hardware.h> | 
 | #include <asm/setup.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/mach-types.h> | 
 |  | 
 | #include <mach/regs-gpio.h> | 
 | #include <mach/regs-lcd.h> | 
 |  | 
 | #include <mach/fb.h> | 
 |  | 
 | #include <linux/platform_data/i2c-s3c2410.h> | 
 | #include <linux/platform_data/mtd-nand-s3c2410.h> | 
 |  | 
 | #include <plat/devs.h> | 
 | #include <plat/cpu.h> | 
 | #include <plat/samsung-time.h> | 
 |  | 
 | #include "common.h" | 
 |  | 
 | static struct map_desc vstms_iodesc[] __initdata = { | 
 | }; | 
 |  | 
 | static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = { | 
 | 	[0] = { | 
 | 		.hwport	     = 0, | 
 | 		.flags	     = 0, | 
 | 		.ucon	     = 0x3c5, | 
 | 		.ulcon	     = 0x03, | 
 | 		.ufcon	     = 0x51, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.hwport	     = 1, | 
 | 		.flags	     = 0, | 
 | 		.ucon	     = 0x3c5, | 
 | 		.ulcon	     = 0x03, | 
 | 		.ufcon	     = 0x51, | 
 | 	}, | 
 | 	[2] = { | 
 | 		.hwport	     = 2, | 
 | 		.flags	     = 0, | 
 | 		.ucon	     = 0x3c5, | 
 | 		.ulcon	     = 0x03, | 
 | 		.ufcon	     = 0x51, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct mtd_partition __initdata vstms_nand_part[] = { | 
 | 	[0] = { | 
 | 		.name	= "Boot Agent", | 
 | 		.size	= 0x7C000, | 
 | 		.offset	= 0, | 
 | 	}, | 
 | 	[1] = { | 
 | 		.name	= "UBoot Config", | 
 | 		.offset = 0x7C000, | 
 | 		.size	= 0x4000, | 
 | 	}, | 
 | 	[2] = { | 
 | 		.name	= "Kernel", | 
 | 		.offset = 0x80000, | 
 | 		.size	= 0x200000, | 
 | 	}, | 
 | 	[3] = { | 
 | 		.name	= "RFS", | 
 | 		.offset	= 0x280000, | 
 | 		.size	= 0x3d80000, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct s3c2410_nand_set __initdata vstms_nand_sets[] = { | 
 | 	[0] = { | 
 | 		.name		= "NAND", | 
 | 		.nr_chips	= 1, | 
 | 		.nr_partitions	= ARRAY_SIZE(vstms_nand_part), | 
 | 		.partitions	= vstms_nand_part, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* choose a set of timings which should suit most 512Mbit | 
 |  * chips and beyond. | 
 | */ | 
 |  | 
 | static struct s3c2410_platform_nand __initdata vstms_nand_info = { | 
 | 	.tacls		= 20, | 
 | 	.twrph0		= 60, | 
 | 	.twrph1		= 20, | 
 | 	.nr_sets	= ARRAY_SIZE(vstms_nand_sets), | 
 | 	.sets		= vstms_nand_sets, | 
 | 	.ecc_mode       = NAND_ECC_SOFT, | 
 | }; | 
 |  | 
 | static struct platform_device *vstms_devices[] __initdata = { | 
 | 	&s3c_device_ohci, | 
 | 	&s3c_device_wdt, | 
 | 	&s3c_device_i2c0, | 
 | 	&s3c_device_iis, | 
 | 	&s3c_device_rtc, | 
 | 	&s3c_device_nand, | 
 | 	&s3c2412_device_dma, | 
 | }; | 
 |  | 
 | static void __init vstms_fixup(struct tag *tags, char **cmdline) | 
 | { | 
 | 	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) { | 
 | 		memblock_add(0x30000000, SZ_64M); | 
 | 	} | 
 | } | 
 |  | 
 | static void __init vstms_map_io(void) | 
 | { | 
 | 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); | 
 | 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); | 
 | 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); | 
 | } | 
 |  | 
 | static void __init vstms_init_time(void) | 
 | { | 
 | 	s3c2412_init_clocks(12000000); | 
 | 	samsung_timer_init(); | 
 | } | 
 |  | 
 | static void __init vstms_init(void) | 
 | { | 
 | 	s3c_i2c0_set_platdata(NULL); | 
 | 	s3c_nand_set_platdata(&vstms_nand_info); | 
 |  | 
 | 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); | 
 | } | 
 |  | 
 | MACHINE_START(VSTMS, "VSTMS") | 
 | 	.atag_offset	= 0x100, | 
 |  | 
 | 	.fixup		= vstms_fixup, | 
 | 	.init_irq	= s3c2412_init_irq, | 
 | 	.init_machine	= vstms_init, | 
 | 	.map_io		= vstms_map_io, | 
 | 	.init_time	= vstms_init_time, | 
 | MACHINE_END |