| /* | 
 |  * nct7904.c - driver for Nuvoton NCT7904D. | 
 |  * | 
 |  * Copyright (c) 2015 Kontron | 
 |  * Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/device.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/hwmon.h> | 
 |  | 
 | #define VENDOR_ID_REG		0x7A	/* Any bank */ | 
 | #define NUVOTON_ID		0x50 | 
 | #define CHIP_ID_REG		0x7B	/* Any bank */ | 
 | #define NCT7904_ID		0xC5 | 
 | #define DEVICE_ID_REG		0x7C	/* Any bank */ | 
 |  | 
 | #define BANK_SEL_REG		0xFF | 
 | #define BANK_0			0x00 | 
 | #define BANK_1			0x01 | 
 | #define BANK_2			0x02 | 
 | #define BANK_3			0x03 | 
 | #define BANK_4			0x04 | 
 | #define BANK_MAX		0x04 | 
 |  | 
 | #define FANIN_MAX		12	/* Counted from 1 */ | 
 | #define VSEN_MAX		21	/* VSEN1..14, 3VDD, VBAT, V3VSB, | 
 | 					   LTD (not a voltage), VSEN17..19 */ | 
 | #define FANCTL_MAX		4	/* Counted from 1 */ | 
 | #define TCPU_MAX		8	/* Counted from 1 */ | 
 | #define TEMP_MAX		4	/* Counted from 1 */ | 
 |  | 
 | #define VT_ADC_CTRL0_REG	0x20	/* Bank 0 */ | 
 | #define VT_ADC_CTRL1_REG	0x21	/* Bank 0 */ | 
 | #define VT_ADC_CTRL2_REG	0x22	/* Bank 0 */ | 
 | #define FANIN_CTRL0_REG		0x24 | 
 | #define FANIN_CTRL1_REG		0x25 | 
 | #define DTS_T_CTRL0_REG		0x26 | 
 | #define DTS_T_CTRL1_REG		0x27 | 
 | #define VT_ADC_MD_REG		0x2E | 
 |  | 
 | #define VSEN1_HV_REG		0x40	/* Bank 0; 2 regs (HV/LV) per sensor */ | 
 | #define TEMP_CH1_HV_REG		0x42	/* Bank 0; same as VSEN2_HV */ | 
 | #define LTD_HV_REG		0x62	/* Bank 0; 2 regs in VSEN range */ | 
 | #define FANIN1_HV_REG		0x80	/* Bank 0; 2 regs (HV/LV) per sensor */ | 
 | #define T_CPU1_HV_REG		0xA0	/* Bank 0; 2 regs (HV/LV) per sensor */ | 
 |  | 
 | #define PRTS_REG		0x03	/* Bank 2 */ | 
 | #define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */ | 
 | #define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */ | 
 |  | 
 | static const unsigned short normal_i2c[] = { | 
 | 	0x2d, 0x2e, I2C_CLIENT_END | 
 | }; | 
 |  | 
 | struct nct7904_data { | 
 | 	struct i2c_client *client; | 
 | 	struct mutex bank_lock; | 
 | 	int bank_sel; | 
 | 	u32 fanin_mask; | 
 | 	u32 vsen_mask; | 
 | 	u32 tcpu_mask; | 
 | 	u8 fan_mode[FANCTL_MAX]; | 
 | }; | 
 |  | 
 | /* Access functions */ | 
 | static int nct7904_bank_lock(struct nct7904_data *data, unsigned int bank) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&data->bank_lock); | 
 | 	if (data->bank_sel == bank) | 
 | 		return 0; | 
 | 	ret = i2c_smbus_write_byte_data(data->client, BANK_SEL_REG, bank); | 
 | 	if (ret == 0) | 
 | 		data->bank_sel = bank; | 
 | 	else | 
 | 		data->bank_sel = -1; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline void nct7904_bank_release(struct nct7904_data *data) | 
 | { | 
 | 	mutex_unlock(&data->bank_lock); | 
 | } | 
 |  | 
 | /* Read 1-byte register. Returns unsigned reg or -ERRNO on error. */ | 
 | static int nct7904_read_reg(struct nct7904_data *data, | 
 | 			    unsigned int bank, unsigned int reg) | 
 | { | 
 | 	struct i2c_client *client = data->client; | 
 | 	int ret; | 
 |  | 
 | 	ret = nct7904_bank_lock(data, bank); | 
 | 	if (ret == 0) | 
 | 		ret = i2c_smbus_read_byte_data(client, reg); | 
 |  | 
 | 	nct7904_bank_release(data); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Read 2-byte register. Returns register in big-endian format or | 
 |  * -ERRNO on error. | 
 |  */ | 
 | static int nct7904_read_reg16(struct nct7904_data *data, | 
 | 			      unsigned int bank, unsigned int reg) | 
 | { | 
 | 	struct i2c_client *client = data->client; | 
 | 	int ret, hi; | 
 |  | 
 | 	ret = nct7904_bank_lock(data, bank); | 
 | 	if (ret == 0) { | 
 | 		ret = i2c_smbus_read_byte_data(client, reg); | 
 | 		if (ret >= 0) { | 
 | 			hi = ret; | 
 | 			ret = i2c_smbus_read_byte_data(client, reg + 1); | 
 | 			if (ret >= 0) | 
 | 				ret |= hi << 8; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	nct7904_bank_release(data); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Write 1-byte register. Returns 0 or -ERRNO on error. */ | 
 | static int nct7904_write_reg(struct nct7904_data *data, | 
 | 			     unsigned int bank, unsigned int reg, u8 val) | 
 | { | 
 | 	struct i2c_client *client = data->client; | 
 | 	int ret; | 
 |  | 
 | 	ret = nct7904_bank_lock(data, bank); | 
 | 	if (ret == 0) | 
 | 		ret = i2c_smbus_write_byte_data(client, reg, val); | 
 |  | 
 | 	nct7904_bank_release(data); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int nct7904_read_fan(struct device *dev, u32 attr, int channel, | 
 | 			    long *val) | 
 | { | 
 | 	struct nct7904_data *data = dev_get_drvdata(dev); | 
 | 	unsigned int cnt, rpm; | 
 | 	int ret; | 
 |  | 
 | 	switch (attr) { | 
 | 	case hwmon_fan_input: | 
 | 		ret = nct7904_read_reg16(data, BANK_0, | 
 | 					 FANIN1_HV_REG + channel * 2); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f); | 
 | 		if (cnt == 0x1fff) | 
 | 			rpm = 0; | 
 | 		else | 
 | 			rpm = 1350000 / cnt; | 
 | 		*val = rpm; | 
 | 		return 0; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static umode_t nct7904_fan_is_visible(const void *_data, u32 attr, int channel) | 
 | { | 
 | 	const struct nct7904_data *data = _data; | 
 |  | 
 | 	if (attr == hwmon_fan_input && data->fanin_mask & (1 << channel)) | 
 | 		return S_IRUGO; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u8 nct7904_chan_to_index[] = { | 
 | 	0,	/* Not used */ | 
 | 	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, | 
 | 	18, 19, 20, 16 | 
 | }; | 
 |  | 
 | static int nct7904_read_in(struct device *dev, u32 attr, int channel, | 
 | 			   long *val) | 
 | { | 
 | 	struct nct7904_data *data = dev_get_drvdata(dev); | 
 | 	int ret, volt, index; | 
 |  | 
 | 	index = nct7904_chan_to_index[channel]; | 
 |  | 
 | 	switch (attr) { | 
 | 	case hwmon_in_input: | 
 | 		ret = nct7904_read_reg16(data, BANK_0, | 
 | 					 VSEN1_HV_REG + index * 2); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		volt = ((ret & 0xff00) >> 5) | (ret & 0x7); | 
 | 		if (index < 14) | 
 | 			volt *= 2; /* 0.002V scale */ | 
 | 		else | 
 | 			volt *= 6; /* 0.006V scale */ | 
 | 		*val = volt; | 
 | 		return 0; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static umode_t nct7904_in_is_visible(const void *_data, u32 attr, int channel) | 
 | { | 
 | 	const struct nct7904_data *data = _data; | 
 | 	int index = nct7904_chan_to_index[channel]; | 
 |  | 
 | 	if (channel > 0 && attr == hwmon_in_input && | 
 | 	    (data->vsen_mask & BIT(index))) | 
 | 		return S_IRUGO; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nct7904_read_temp(struct device *dev, u32 attr, int channel, | 
 | 			     long *val) | 
 | { | 
 | 	struct nct7904_data *data = dev_get_drvdata(dev); | 
 | 	int ret, temp; | 
 |  | 
 | 	switch (attr) { | 
 | 	case hwmon_temp_input: | 
 | 		if (channel == 0) | 
 | 			ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG); | 
 | 		else | 
 | 			ret = nct7904_read_reg16(data, BANK_0, | 
 | 					T_CPU1_HV_REG + (channel - 1) * 2); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		temp = ((ret & 0xff00) >> 5) | (ret & 0x7); | 
 | 		*val = sign_extend32(temp, 10) * 125; | 
 | 		return 0; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel) | 
 | { | 
 | 	const struct nct7904_data *data = _data; | 
 |  | 
 | 	if (attr == hwmon_temp_input) { | 
 | 		if (channel == 0) { | 
 | 			if (data->vsen_mask & BIT(17)) | 
 | 				return S_IRUGO; | 
 | 		} else { | 
 | 			if (data->tcpu_mask & BIT(channel - 1)) | 
 | 				return S_IRUGO; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nct7904_read_pwm(struct device *dev, u32 attr, int channel, | 
 | 			    long *val) | 
 | { | 
 | 	struct nct7904_data *data = dev_get_drvdata(dev); | 
 | 	int ret; | 
 |  | 
 | 	switch (attr) { | 
 | 	case hwmon_pwm_input: | 
 | 		ret = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + channel); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		*val = ret; | 
 | 		return 0; | 
 | 	case hwmon_pwm_enable: | 
 | 		ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + channel); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 |  | 
 | 		*val = ret ? 2 : 1; | 
 | 		return 0; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static int nct7904_write_pwm(struct device *dev, u32 attr, int channel, | 
 | 			     long val) | 
 | { | 
 | 	struct nct7904_data *data = dev_get_drvdata(dev); | 
 | 	int ret; | 
 |  | 
 | 	switch (attr) { | 
 | 	case hwmon_pwm_input: | 
 | 		if (val < 0 || val > 255) | 
 | 			return -EINVAL; | 
 | 		ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + channel, | 
 | 					val); | 
 | 		return ret; | 
 | 	case hwmon_pwm_enable: | 
 | 		if (val < 1 || val > 2 || | 
 | 		    (val == 2 && !data->fan_mode[channel])) | 
 | 			return -EINVAL; | 
 | 		ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + channel, | 
 | 					val == 2 ? data->fan_mode[channel] : 0); | 
 | 		return ret; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static umode_t nct7904_pwm_is_visible(const void *_data, u32 attr, int channel) | 
 | { | 
 | 	switch (attr) { | 
 | 	case hwmon_pwm_input: | 
 | 	case hwmon_pwm_enable: | 
 | 		return S_IRUGO | S_IWUSR; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static int nct7904_read(struct device *dev, enum hwmon_sensor_types type, | 
 | 			u32 attr, int channel, long *val) | 
 | { | 
 | 	switch (type) { | 
 | 	case hwmon_in: | 
 | 		return nct7904_read_in(dev, attr, channel, val); | 
 | 	case hwmon_fan: | 
 | 		return nct7904_read_fan(dev, attr, channel, val); | 
 | 	case hwmon_pwm: | 
 | 		return nct7904_read_pwm(dev, attr, channel, val); | 
 | 	case hwmon_temp: | 
 | 		return nct7904_read_temp(dev, attr, channel, val); | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static int nct7904_write(struct device *dev, enum hwmon_sensor_types type, | 
 | 			 u32 attr, int channel, long val) | 
 | { | 
 | 	switch (type) { | 
 | 	case hwmon_pwm: | 
 | 		return nct7904_write_pwm(dev, attr, channel, val); | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static umode_t nct7904_is_visible(const void *data, | 
 | 				  enum hwmon_sensor_types type, | 
 | 				  u32 attr, int channel) | 
 | { | 
 | 	switch (type) { | 
 | 	case hwmon_in: | 
 | 		return nct7904_in_is_visible(data, attr, channel); | 
 | 	case hwmon_fan: | 
 | 		return nct7904_fan_is_visible(data, attr, channel); | 
 | 	case hwmon_pwm: | 
 | 		return nct7904_pwm_is_visible(data, attr, channel); | 
 | 	case hwmon_temp: | 
 | 		return nct7904_temp_is_visible(data, attr, channel); | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | static int nct7904_detect(struct i2c_client *client, | 
 | 			  struct i2c_board_info *info) | 
 | { | 
 | 	struct i2c_adapter *adapter = client->adapter; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, | 
 | 				     I2C_FUNC_SMBUS_READ_BYTE | | 
 | 				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* Determine the chip type. */ | 
 | 	if (i2c_smbus_read_byte_data(client, VENDOR_ID_REG) != NUVOTON_ID || | 
 | 	    i2c_smbus_read_byte_data(client, CHIP_ID_REG) != NCT7904_ID || | 
 | 	    (i2c_smbus_read_byte_data(client, DEVICE_ID_REG) & 0xf0) != 0x50 || | 
 | 	    (i2c_smbus_read_byte_data(client, BANK_SEL_REG) & 0xf8) != 0x00) | 
 | 		return -ENODEV; | 
 |  | 
 | 	strlcpy(info->type, "nct7904", I2C_NAME_SIZE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const u32 nct7904_in_config[] = { | 
 | 	HWMON_I_INPUT,                  /* dummy, skipped in is_visible */ | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	HWMON_I_INPUT, | 
 | 	0 | 
 | }; | 
 |  | 
 | static const struct hwmon_channel_info nct7904_in = { | 
 | 	.type = hwmon_in, | 
 | 	.config = nct7904_in_config, | 
 | }; | 
 |  | 
 | static const u32 nct7904_fan_config[] = { | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	HWMON_F_INPUT, | 
 | 	0 | 
 | }; | 
 |  | 
 | static const struct hwmon_channel_info nct7904_fan = { | 
 | 	.type = hwmon_fan, | 
 | 	.config = nct7904_fan_config, | 
 | }; | 
 |  | 
 | static const u32 nct7904_pwm_config[] = { | 
 | 	HWMON_PWM_INPUT | HWMON_PWM_ENABLE, | 
 | 	HWMON_PWM_INPUT | HWMON_PWM_ENABLE, | 
 | 	HWMON_PWM_INPUT | HWMON_PWM_ENABLE, | 
 | 	HWMON_PWM_INPUT | HWMON_PWM_ENABLE, | 
 | 	0 | 
 | }; | 
 |  | 
 | static const struct hwmon_channel_info nct7904_pwm = { | 
 | 	.type = hwmon_pwm, | 
 | 	.config = nct7904_pwm_config, | 
 | }; | 
 |  | 
 | static const u32 nct7904_temp_config[] = { | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	HWMON_T_INPUT, | 
 | 	0 | 
 | }; | 
 |  | 
 | static const struct hwmon_channel_info nct7904_temp = { | 
 | 	.type = hwmon_temp, | 
 | 	.config = nct7904_temp_config, | 
 | }; | 
 |  | 
 | static const struct hwmon_channel_info *nct7904_info[] = { | 
 | 	&nct7904_in, | 
 | 	&nct7904_fan, | 
 | 	&nct7904_pwm, | 
 | 	&nct7904_temp, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct hwmon_ops nct7904_hwmon_ops = { | 
 | 	.is_visible = nct7904_is_visible, | 
 | 	.read = nct7904_read, | 
 | 	.write = nct7904_write, | 
 | }; | 
 |  | 
 | static const struct hwmon_chip_info nct7904_chip_info = { | 
 | 	.ops = &nct7904_hwmon_ops, | 
 | 	.info = nct7904_info, | 
 | }; | 
 |  | 
 | static int nct7904_probe(struct i2c_client *client, | 
 | 			 const struct i2c_device_id *id) | 
 | { | 
 | 	struct nct7904_data *data; | 
 | 	struct device *hwmon_dev; | 
 | 	struct device *dev = &client->dev; | 
 | 	int ret, i; | 
 | 	u32 mask; | 
 |  | 
 | 	data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	data->client = client; | 
 | 	mutex_init(&data->bank_lock); | 
 | 	data->bank_sel = -1; | 
 |  | 
 | 	/* Setup sensor groups. */ | 
 | 	/* FANIN attributes */ | 
 | 	ret = nct7904_read_reg16(data, BANK_0, FANIN_CTRL0_REG); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	data->fanin_mask = (ret >> 8) | ((ret & 0xff) << 8); | 
 |  | 
 | 	/* | 
 | 	 * VSEN attributes | 
 | 	 * | 
 | 	 * Note: voltage sensors overlap with external temperature | 
 | 	 * sensors. So, if we ever decide to support the latter | 
 | 	 * we will have to adjust 'vsen_mask' accordingly. | 
 | 	 */ | 
 | 	mask = 0; | 
 | 	ret = nct7904_read_reg16(data, BANK_0, VT_ADC_CTRL0_REG); | 
 | 	if (ret >= 0) | 
 | 		mask = (ret >> 8) | ((ret & 0xff) << 8); | 
 | 	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG); | 
 | 	if (ret >= 0) | 
 | 		mask |= (ret << 16); | 
 | 	data->vsen_mask = mask; | 
 |  | 
 | 	/* CPU_TEMP attributes */ | 
 | 	ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4); | 
 |  | 
 | 	for (i = 0; i < FANCTL_MAX; i++) { | 
 | 		ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		data->fan_mode[i] = ret; | 
 | 	} | 
 |  | 
 | 	hwmon_dev = | 
 | 		devm_hwmon_device_register_with_info(dev, client->name, data, | 
 | 						     &nct7904_chip_info, NULL); | 
 | 	return PTR_ERR_OR_ZERO(hwmon_dev); | 
 | } | 
 |  | 
 | static const struct i2c_device_id nct7904_id[] = { | 
 | 	{"nct7904", 0}, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, nct7904_id); | 
 |  | 
 | static struct i2c_driver nct7904_driver = { | 
 | 	.class = I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name = "nct7904", | 
 | 	}, | 
 | 	.probe = nct7904_probe, | 
 | 	.id_table = nct7904_id, | 
 | 	.detect = nct7904_detect, | 
 | 	.address_list = normal_i2c, | 
 | }; | 
 |  | 
 | module_i2c_driver(nct7904_driver); | 
 |  | 
 | MODULE_AUTHOR("Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>"); | 
 | MODULE_DESCRIPTION("Hwmon driver for NUVOTON NCT7904"); | 
 | MODULE_LICENSE("GPL"); |