| /* | 
 |  * NFTL mount code with extensive checks | 
 |  * | 
 |  * Author: Fabrice Bellard (fabrice.bellard@netgem.com) | 
 |  * Copyright © 2000 Netgem S.A. | 
 |  * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <asm/errno.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/mtd/mtd.h> | 
 | #include <linux/mtd/rawnand.h> | 
 | #include <linux/mtd/nftl.h> | 
 |  | 
 | #define SECTORSIZE 512 | 
 |  | 
 | /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the | 
 |  *	various device information of the NFTL partition and Bad Unit Table. Update | 
 |  *	the ReplUnitTable[] table according to the Bad Unit Table. ReplUnitTable[] | 
 |  *	is used for management of Erase Unit in other routines in nftl.c and nftlmount.c | 
 |  */ | 
 | static int find_boot_record(struct NFTLrecord *nftl) | 
 | { | 
 | 	struct nftl_uci1 h1; | 
 | 	unsigned int block, boot_record_count = 0; | 
 | 	size_t retlen; | 
 | 	u8 buf[SECTORSIZE]; | 
 | 	struct NFTLMediaHeader *mh = &nftl->MediaHdr; | 
 | 	struct mtd_info *mtd = nftl->mbd.mtd; | 
 | 	unsigned int i; | 
 |  | 
 |         /* Assume logical EraseSize == physical erasesize for starting the scan. | 
 | 	   We'll sort it out later if we find a MediaHeader which says otherwise */ | 
 | 	/* Actually, we won't.  The new DiskOnChip driver has already scanned | 
 | 	   the MediaHeader and adjusted the virtual erasesize it presents in | 
 | 	   the mtd device accordingly.  We could even get rid of | 
 | 	   nftl->EraseSize if there were any point in doing so. */ | 
 | 	nftl->EraseSize = nftl->mbd.mtd->erasesize; | 
 |         nftl->nb_blocks = (u32)nftl->mbd.mtd->size / nftl->EraseSize; | 
 |  | 
 | 	nftl->MediaUnit = BLOCK_NIL; | 
 | 	nftl->SpareMediaUnit = BLOCK_NIL; | 
 |  | 
 | 	/* search for a valid boot record */ | 
 | 	for (block = 0; block < nftl->nb_blocks; block++) { | 
 | 		int ret; | 
 |  | 
 | 		/* Check for ANAND header first. Then can whinge if it's found but later | 
 | 		   checks fail */ | 
 | 		ret = mtd_read(mtd, block * nftl->EraseSize, SECTORSIZE, | 
 | 			       &retlen, buf); | 
 | 		/* We ignore ret in case the ECC of the MediaHeader is invalid | 
 | 		   (which is apparently acceptable) */ | 
 | 		if (retlen != SECTORSIZE) { | 
 | 			static int warncount = 5; | 
 |  | 
 | 			if (warncount) { | 
 | 				printk(KERN_WARNING "Block read at 0x%x of mtd%d failed: %d\n", | 
 | 				       block * nftl->EraseSize, nftl->mbd.mtd->index, ret); | 
 | 				if (!--warncount) | 
 | 					printk(KERN_WARNING "Further failures for this block will not be printed\n"); | 
 | 			} | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (retlen < 6 || memcmp(buf, "ANAND", 6)) { | 
 | 			/* ANAND\0 not found. Continue */ | 
 | #if 0 | 
 | 			printk(KERN_DEBUG "ANAND header not found at 0x%x in mtd%d\n", | 
 | 			       block * nftl->EraseSize, nftl->mbd.mtd->index); | 
 | #endif | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* To be safer with BIOS, also use erase mark as discriminant */ | 
 | 		ret = nftl_read_oob(mtd, block * nftl->EraseSize + | 
 | 					 SECTORSIZE + 8, 8, &retlen, | 
 | 					 (char *)&h1); | 
 | 		if (ret < 0) { | 
 | 			printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n", | 
 | 			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | #if 0 /* Some people seem to have devices without ECC or erase marks | 
 | 	 on the Media Header blocks. There are enough other sanity | 
 | 	 checks in here that we can probably do without it. | 
 |       */ | 
 | 		if (le16_to_cpu(h1.EraseMark | h1.EraseMark1) != ERASE_MARK) { | 
 | 			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but erase mark not present (0x%04x,0x%04x instead)\n", | 
 | 			       block * nftl->EraseSize, nftl->mbd.mtd->index, | 
 | 			       le16_to_cpu(h1.EraseMark), le16_to_cpu(h1.EraseMark1)); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Finally reread to check ECC */ | 
 | 		ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE, | 
 | 				&retlen, buf); | 
 | 		if (ret < 0) { | 
 | 			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n", | 
 | 			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Paranoia. Check the ANAND header is still there after the ECC read */ | 
 | 		if (memcmp(buf, "ANAND", 6)) { | 
 | 			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but went away on reread!\n", | 
 | 			       block * nftl->EraseSize, nftl->mbd.mtd->index); | 
 | 			printk(KERN_NOTICE "New data are: %6ph\n", buf); | 
 | 			continue; | 
 | 		} | 
 | #endif | 
 | 		/* OK, we like it. */ | 
 |  | 
 | 		if (boot_record_count) { | 
 | 			/* We've already processed one. So we just check if | 
 | 			   this one is the same as the first one we found */ | 
 | 			if (memcmp(mh, buf, sizeof(struct NFTLMediaHeader))) { | 
 | 				printk(KERN_NOTICE "NFTL Media Headers at 0x%x and 0x%x disagree.\n", | 
 | 				       nftl->MediaUnit * nftl->EraseSize, block * nftl->EraseSize); | 
 | 				/* if (debug) Print both side by side */ | 
 | 				if (boot_record_count < 2) { | 
 | 					/* We haven't yet seen two real ones */ | 
 | 					return -1; | 
 | 				} | 
 | 				continue; | 
 | 			} | 
 | 			if (boot_record_count == 1) | 
 | 				nftl->SpareMediaUnit = block; | 
 |  | 
 | 			/* Mark this boot record (NFTL MediaHeader) block as reserved */ | 
 | 			nftl->ReplUnitTable[block] = BLOCK_RESERVED; | 
 |  | 
 |  | 
 | 			boot_record_count++; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* This is the first we've seen. Copy the media header structure into place */ | 
 | 		memcpy(mh, buf, sizeof(struct NFTLMediaHeader)); | 
 |  | 
 | 		/* Do some sanity checks on it */ | 
 | #if 0 | 
 | The new DiskOnChip driver scans the MediaHeader itself, and presents a virtual | 
 | erasesize based on UnitSizeFactor.  So the erasesize we read from the mtd | 
 | device is already correct. | 
 | 		if (mh->UnitSizeFactor == 0) { | 
 | 			printk(KERN_NOTICE "NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we know what it means...\n"); | 
 | 		} else if (mh->UnitSizeFactor < 0xfc) { | 
 | 			printk(KERN_NOTICE "Sorry, we don't support UnitSizeFactor 0x%02x\n", | 
 | 			       mh->UnitSizeFactor); | 
 | 			return -1; | 
 | 		} else if (mh->UnitSizeFactor != 0xff) { | 
 | 			printk(KERN_NOTICE "WARNING: Support for NFTL with UnitSizeFactor 0x%02x is experimental\n", | 
 | 			       mh->UnitSizeFactor); | 
 | 			nftl->EraseSize = nftl->mbd.mtd->erasesize << (0xff - mh->UnitSizeFactor); | 
 | 			nftl->nb_blocks = (u32)nftl->mbd.mtd->size / nftl->EraseSize; | 
 | 		} | 
 | #endif | 
 | 		nftl->nb_boot_blocks = le16_to_cpu(mh->FirstPhysicalEUN); | 
 | 		if ((nftl->nb_boot_blocks + 2) >= nftl->nb_blocks) { | 
 | 			printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n"); | 
 | 			printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n", | 
 | 			       nftl->nb_boot_blocks, nftl->nb_blocks); | 
 | 			return -1; | 
 | 		} | 
 |  | 
 | 		nftl->numvunits = le32_to_cpu(mh->FormattedSize) / nftl->EraseSize; | 
 | 		if (nftl->numvunits > (nftl->nb_blocks - nftl->nb_boot_blocks - 2)) { | 
 | 			printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n"); | 
 | 			printk(KERN_NOTICE "numvunits (%d) > nb_blocks (%d) - nb_boot_blocks(%d) - 2\n", | 
 | 			       nftl->numvunits, nftl->nb_blocks, nftl->nb_boot_blocks); | 
 | 			return -1; | 
 | 		} | 
 |  | 
 | 		nftl->mbd.size  = nftl->numvunits * (nftl->EraseSize / SECTORSIZE); | 
 |  | 
 | 		/* If we're not using the last sectors in the device for some reason, | 
 | 		   reduce nb_blocks accordingly so we forget they're there */ | 
 | 		nftl->nb_blocks = le16_to_cpu(mh->NumEraseUnits) + le16_to_cpu(mh->FirstPhysicalEUN); | 
 |  | 
 | 		/* XXX: will be suppressed */ | 
 | 		nftl->lastEUN = nftl->nb_blocks - 1; | 
 |  | 
 | 		/* memory alloc */ | 
 | 		nftl->EUNtable = kmalloc_array(nftl->nb_blocks, sizeof(u16), | 
 | 					       GFP_KERNEL); | 
 | 		if (!nftl->EUNtable) { | 
 | 			printk(KERN_NOTICE "NFTL: allocation of EUNtable failed\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 |  | 
 | 		nftl->ReplUnitTable = kmalloc_array(nftl->nb_blocks, | 
 | 						    sizeof(u16), | 
 | 						    GFP_KERNEL); | 
 | 		if (!nftl->ReplUnitTable) { | 
 | 			kfree(nftl->EUNtable); | 
 | 			printk(KERN_NOTICE "NFTL: allocation of ReplUnitTable failed\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 |  | 
 | 		/* mark the bios blocks (blocks before NFTL MediaHeader) as reserved */ | 
 | 		for (i = 0; i < nftl->nb_boot_blocks; i++) | 
 | 			nftl->ReplUnitTable[i] = BLOCK_RESERVED; | 
 | 		/* mark all remaining blocks as potentially containing data */ | 
 | 		for (; i < nftl->nb_blocks; i++) { | 
 | 			nftl->ReplUnitTable[i] = BLOCK_NOTEXPLORED; | 
 | 		} | 
 |  | 
 | 		/* Mark this boot record (NFTL MediaHeader) block as reserved */ | 
 | 		nftl->ReplUnitTable[block] = BLOCK_RESERVED; | 
 |  | 
 | 		/* read the Bad Erase Unit Table and modify ReplUnitTable[] accordingly */ | 
 | 		for (i = 0; i < nftl->nb_blocks; i++) { | 
 | #if 0 | 
 | The new DiskOnChip driver already scanned the bad block table.  Just query it. | 
 | 			if ((i & (SECTORSIZE - 1)) == 0) { | 
 | 				/* read one sector for every SECTORSIZE of blocks */ | 
 | 				ret = mtd->read(nftl->mbd.mtd, | 
 | 						block * nftl->EraseSize + i + | 
 | 						SECTORSIZE, SECTORSIZE, | 
 | 						&retlen, buf); | 
 | 				if (ret < 0) { | 
 | 					printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n", | 
 | 					       ret); | 
 | 					kfree(nftl->ReplUnitTable); | 
 | 					kfree(nftl->EUNtable); | 
 | 					return -1; | 
 | 				} | 
 | 			} | 
 | 			/* mark the Bad Erase Unit as RESERVED in ReplUnitTable */ | 
 | 			if (buf[i & (SECTORSIZE - 1)] != 0xff) | 
 | 				nftl->ReplUnitTable[i] = BLOCK_RESERVED; | 
 | #endif | 
 | 			if (mtd_block_isbad(nftl->mbd.mtd, | 
 | 					    i * nftl->EraseSize)) | 
 | 				nftl->ReplUnitTable[i] = BLOCK_RESERVED; | 
 | 		} | 
 |  | 
 | 		nftl->MediaUnit = block; | 
 | 		boot_record_count++; | 
 |  | 
 | 	} /* foreach (block) */ | 
 |  | 
 | 	return boot_record_count?0:-1; | 
 | } | 
 |  | 
 | static int memcmpb(void *a, int c, int n) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < n; i++) { | 
 | 		if (c != ((unsigned char *)a)[i]) | 
 | 			return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* check_free_sector: check if a free sector is actually FREE, i.e. All 0xff in data and oob area */ | 
 | static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len, | 
 | 			      int check_oob) | 
 | { | 
 | 	struct mtd_info *mtd = nftl->mbd.mtd; | 
 | 	size_t retlen; | 
 | 	int i, ret; | 
 | 	u8 *buf; | 
 |  | 
 | 	buf = kmalloc(SECTORSIZE + mtd->oobsize, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -1; | 
 |  | 
 | 	ret = -1; | 
 | 	for (i = 0; i < len; i += SECTORSIZE) { | 
 | 		if (mtd_read(mtd, address, SECTORSIZE, &retlen, buf)) | 
 | 			goto out; | 
 | 		if (memcmpb(buf, 0xff, SECTORSIZE) != 0) | 
 | 			goto out; | 
 |  | 
 | 		if (check_oob) { | 
 | 			if(nftl_read_oob(mtd, address, mtd->oobsize, | 
 | 					 &retlen, &buf[SECTORSIZE]) < 0) | 
 | 				goto out; | 
 | 			if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0) | 
 | 				goto out; | 
 | 		} | 
 | 		address += SECTORSIZE; | 
 | 	} | 
 |  | 
 | 	ret = 0; | 
 |  | 
 | out: | 
 | 	kfree(buf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* NFTL_format: format a Erase Unit by erasing ALL Erase Zones in the Erase Unit and | 
 |  *              Update NFTL metadata. Each erase operation is checked with check_free_sectors | 
 |  * | 
 |  * Return: 0 when succeed, -1 on error. | 
 |  * | 
 |  *  ToDo: 1. Is it necessary to check_free_sector after erasing ?? | 
 |  */ | 
 | int NFTL_formatblock(struct NFTLrecord *nftl, int block) | 
 | { | 
 | 	size_t retlen; | 
 | 	unsigned int nb_erases, erase_mark; | 
 | 	struct nftl_uci1 uci; | 
 | 	struct erase_info *instr = &nftl->instr; | 
 | 	struct mtd_info *mtd = nftl->mbd.mtd; | 
 |  | 
 | 	/* Read the Unit Control Information #1 for Wear-Leveling */ | 
 | 	if (nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8, | 
 | 			  8, &retlen, (char *)&uci) < 0) | 
 | 		goto default_uci1; | 
 |  | 
 | 	erase_mark = le16_to_cpu ((uci.EraseMark | uci.EraseMark1)); | 
 | 	if (erase_mark != ERASE_MARK) { | 
 | 	default_uci1: | 
 | 		uci.EraseMark = cpu_to_le16(ERASE_MARK); | 
 | 		uci.EraseMark1 = cpu_to_le16(ERASE_MARK); | 
 | 		uci.WearInfo = cpu_to_le32(0); | 
 | 	} | 
 |  | 
 | 	memset(instr, 0, sizeof(struct erase_info)); | 
 |  | 
 | 	/* XXX: use async erase interface, XXX: test return code */ | 
 | 	instr->addr = block * nftl->EraseSize; | 
 | 	instr->len = nftl->EraseSize; | 
 | 	if (mtd_erase(mtd, instr)) { | 
 | 		printk("Error while formatting block %d\n", block); | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 		/* increase and write Wear-Leveling info */ | 
 | 		nb_erases = le32_to_cpu(uci.WearInfo); | 
 | 		nb_erases++; | 
 |  | 
 | 		/* wrap (almost impossible with current flash) or free block */ | 
 | 		if (nb_erases == 0) | 
 | 			nb_erases = 1; | 
 |  | 
 | 		/* check the "freeness" of Erase Unit before updating metadata | 
 | 		 * FixMe:  is this check really necessary ? since we have check the | 
 | 		 *         return code after the erase operation. */ | 
 | 		if (check_free_sectors(nftl, instr->addr, nftl->EraseSize, 1) != 0) | 
 | 			goto fail; | 
 |  | 
 | 		uci.WearInfo = le32_to_cpu(nb_erases); | 
 | 		if (nftl_write_oob(mtd, block * nftl->EraseSize + SECTORSIZE + | 
 | 				   8, 8, &retlen, (char *)&uci) < 0) | 
 | 			goto fail; | 
 | 		return 0; | 
 | fail: | 
 | 	/* could not format, update the bad block table (caller is responsible | 
 | 	   for setting the ReplUnitTable to BLOCK_RESERVED on failure) */ | 
 | 	mtd_block_markbad(nftl->mbd.mtd, instr->addr); | 
 | 	return -1; | 
 | } | 
 |  | 
 | /* check_sectors_in_chain: Check that each sector of a Virtual Unit Chain is correct. | 
 |  *	Mark as 'IGNORE' each incorrect sector. This check is only done if the chain | 
 |  *	was being folded when NFTL was interrupted. | 
 |  * | 
 |  *	The check_free_sectors in this function is necessary. There is a possible | 
 |  *	situation that after writing the Data area, the Block Control Information is | 
 |  *	not updated according (due to power failure or something) which leaves the block | 
 |  *	in an inconsistent state. So we have to check if a block is really FREE in this | 
 |  *	case. */ | 
 | static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block) | 
 | { | 
 | 	struct mtd_info *mtd = nftl->mbd.mtd; | 
 | 	unsigned int block, i, status; | 
 | 	struct nftl_bci bci; | 
 | 	int sectors_per_block; | 
 | 	size_t retlen; | 
 |  | 
 | 	sectors_per_block = nftl->EraseSize / SECTORSIZE; | 
 | 	block = first_block; | 
 | 	for (;;) { | 
 | 		for (i = 0; i < sectors_per_block; i++) { | 
 | 			if (nftl_read_oob(mtd, | 
 | 					  block * nftl->EraseSize + i * SECTORSIZE, | 
 | 					  8, &retlen, (char *)&bci) < 0) | 
 | 				status = SECTOR_IGNORE; | 
 | 			else | 
 | 				status = bci.Status | bci.Status1; | 
 |  | 
 | 			switch(status) { | 
 | 			case SECTOR_FREE: | 
 | 				/* verify that the sector is really free. If not, mark | 
 | 				   as ignore */ | 
 | 				if (memcmpb(&bci, 0xff, 8) != 0 || | 
 | 				    check_free_sectors(nftl, block * nftl->EraseSize + i * SECTORSIZE, | 
 | 						       SECTORSIZE, 0) != 0) { | 
 | 					printk("Incorrect free sector %d in block %d: " | 
 | 					       "marking it as ignored\n", | 
 | 					       i, block); | 
 |  | 
 | 					/* sector not free actually : mark it as SECTOR_IGNORE  */ | 
 | 					bci.Status = SECTOR_IGNORE; | 
 | 					bci.Status1 = SECTOR_IGNORE; | 
 | 					nftl_write_oob(mtd, block * | 
 | 						       nftl->EraseSize + | 
 | 						       i * SECTORSIZE, 8, | 
 | 						       &retlen, (char *)&bci); | 
 | 				} | 
 | 				break; | 
 | 			default: | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* proceed to next Erase Unit on the chain */ | 
 | 		block = nftl->ReplUnitTable[block]; | 
 | 		if (!(block == BLOCK_NIL || block < nftl->nb_blocks)) | 
 | 			printk("incorrect ReplUnitTable[] : %d\n", block); | 
 | 		if (block == BLOCK_NIL || block >= nftl->nb_blocks) | 
 | 			break; | 
 | 	} | 
 | } | 
 |  | 
 | /* calc_chain_length: Walk through a Virtual Unit Chain and estimate chain length */ | 
 | static int calc_chain_length(struct NFTLrecord *nftl, unsigned int first_block) | 
 | { | 
 | 	unsigned int length = 0, block = first_block; | 
 |  | 
 | 	for (;;) { | 
 | 		length++; | 
 | 		/* avoid infinite loops, although this is guaranteed not to | 
 | 		   happen because of the previous checks */ | 
 | 		if (length >= nftl->nb_blocks) { | 
 | 			printk("nftl: length too long %d !\n", length); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		block = nftl->ReplUnitTable[block]; | 
 | 		if (!(block == BLOCK_NIL || block < nftl->nb_blocks)) | 
 | 			printk("incorrect ReplUnitTable[] : %d\n", block); | 
 | 		if (block == BLOCK_NIL || block >= nftl->nb_blocks) | 
 | 			break; | 
 | 	} | 
 | 	return length; | 
 | } | 
 |  | 
 | /* format_chain: Format an invalid Virtual Unit chain. It frees all the Erase Units in a | 
 |  *	Virtual Unit Chain, i.e. all the units are disconnected. | 
 |  * | 
 |  *	It is not strictly correct to begin from the first block of the chain because | 
 |  *	if we stop the code, we may see again a valid chain if there was a first_block | 
 |  *	flag in a block inside it. But is it really a problem ? | 
 |  * | 
 |  * FixMe: Figure out what the last statement means. What if power failure when we are | 
 |  *	in the for (;;) loop formatting blocks ?? | 
 |  */ | 
 | static void format_chain(struct NFTLrecord *nftl, unsigned int first_block) | 
 | { | 
 | 	unsigned int block = first_block, block1; | 
 |  | 
 | 	printk("Formatting chain at block %d\n", first_block); | 
 |  | 
 | 	for (;;) { | 
 | 		block1 = nftl->ReplUnitTable[block]; | 
 |  | 
 | 		printk("Formatting block %d\n", block); | 
 | 		if (NFTL_formatblock(nftl, block) < 0) { | 
 | 			/* cannot format !!!! Mark it as Bad Unit */ | 
 | 			nftl->ReplUnitTable[block] = BLOCK_RESERVED; | 
 | 		} else { | 
 | 			nftl->ReplUnitTable[block] = BLOCK_FREE; | 
 | 		} | 
 |  | 
 | 		/* goto next block on the chain */ | 
 | 		block = block1; | 
 |  | 
 | 		if (!(block == BLOCK_NIL || block < nftl->nb_blocks)) | 
 | 			printk("incorrect ReplUnitTable[] : %d\n", block); | 
 | 		if (block == BLOCK_NIL || block >= nftl->nb_blocks) | 
 | 			break; | 
 | 	} | 
 | } | 
 |  | 
 | /* check_and_mark_free_block: Verify that a block is free in the NFTL sense (valid erase mark) or | 
 |  *	totally free (only 0xff). | 
 |  * | 
 |  * Definition: Free Erase Unit -- A properly erased/formatted Free Erase Unit should have meet the | 
 |  *	following criteria: | 
 |  *	1. */ | 
 | static int check_and_mark_free_block(struct NFTLrecord *nftl, int block) | 
 | { | 
 | 	struct mtd_info *mtd = nftl->mbd.mtd; | 
 | 	struct nftl_uci1 h1; | 
 | 	unsigned int erase_mark; | 
 | 	size_t retlen; | 
 |  | 
 | 	/* check erase mark. */ | 
 | 	if (nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, | 
 | 			  &retlen, (char *)&h1) < 0) | 
 | 		return -1; | 
 |  | 
 | 	erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1)); | 
 | 	if (erase_mark != ERASE_MARK) { | 
 | 		/* if no erase mark, the block must be totally free. This is | 
 | 		   possible in two cases : empty filesystem or interrupted erase (very unlikely) */ | 
 | 		if (check_free_sectors (nftl, block * nftl->EraseSize, nftl->EraseSize, 1) != 0) | 
 | 			return -1; | 
 |  | 
 | 		/* free block : write erase mark */ | 
 | 		h1.EraseMark = cpu_to_le16(ERASE_MARK); | 
 | 		h1.EraseMark1 = cpu_to_le16(ERASE_MARK); | 
 | 		h1.WearInfo = cpu_to_le32(0); | 
 | 		if (nftl_write_oob(mtd, | 
 | 				   block * nftl->EraseSize + SECTORSIZE + 8, 8, | 
 | 				   &retlen, (char *)&h1) < 0) | 
 | 			return -1; | 
 | 	} else { | 
 | #if 0 | 
 | 		/* if erase mark present, need to skip it when doing check */ | 
 | 		for (i = 0; i < nftl->EraseSize; i += SECTORSIZE) { | 
 | 			/* check free sector */ | 
 | 			if (check_free_sectors (nftl, block * nftl->EraseSize + i, | 
 | 						SECTORSIZE, 0) != 0) | 
 | 				return -1; | 
 |  | 
 | 			if (nftl_read_oob(mtd, block * nftl->EraseSize + i, | 
 | 					  16, &retlen, buf) < 0) | 
 | 				return -1; | 
 | 			if (i == SECTORSIZE) { | 
 | 				/* skip erase mark */ | 
 | 				if (memcmpb(buf, 0xff, 8)) | 
 | 					return -1; | 
 | 			} else { | 
 | 				if (memcmpb(buf, 0xff, 16)) | 
 | 					return -1; | 
 | 			} | 
 | 		} | 
 | #endif | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* get_fold_mark: Read fold mark from Unit Control Information #2, we use FOLD_MARK_IN_PROGRESS | 
 |  *	to indicate that we are in the progression of a Virtual Unit Chain folding. If the UCI #2 | 
 |  *	is FOLD_MARK_IN_PROGRESS when mounting the NFTL, the (previous) folding process is interrupted | 
 |  *	for some reason. A clean up/check of the VUC is necessary in this case. | 
 |  * | 
 |  * WARNING: return 0 if read error | 
 |  */ | 
 | static int get_fold_mark(struct NFTLrecord *nftl, unsigned int block) | 
 | { | 
 | 	struct mtd_info *mtd = nftl->mbd.mtd; | 
 | 	struct nftl_uci2 uci; | 
 | 	size_t retlen; | 
 |  | 
 | 	if (nftl_read_oob(mtd, block * nftl->EraseSize + 2 * SECTORSIZE + 8, | 
 | 			  8, &retlen, (char *)&uci) < 0) | 
 | 		return 0; | 
 |  | 
 | 	return le16_to_cpu((uci.FoldMark | uci.FoldMark1)); | 
 | } | 
 |  | 
 | int NFTL_mount(struct NFTLrecord *s) | 
 | { | 
 | 	int i; | 
 | 	unsigned int first_logical_block, logical_block, rep_block, erase_mark; | 
 | 	unsigned int block, first_block, is_first_block; | 
 | 	int chain_length, do_format_chain; | 
 | 	struct nftl_uci0 h0; | 
 | 	struct nftl_uci1 h1; | 
 | 	struct mtd_info *mtd = s->mbd.mtd; | 
 | 	size_t retlen; | 
 |  | 
 | 	/* search for NFTL MediaHeader and Spare NFTL Media Header */ | 
 | 	if (find_boot_record(s) < 0) { | 
 | 		printk("Could not find valid boot record\n"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	/* init the logical to physical table */ | 
 | 	for (i = 0; i < s->nb_blocks; i++) { | 
 | 		s->EUNtable[i] = BLOCK_NIL; | 
 | 	} | 
 |  | 
 | 	/* first pass : explore each block chain */ | 
 | 	first_logical_block = 0; | 
 | 	for (first_block = 0; first_block < s->nb_blocks; first_block++) { | 
 | 		/* if the block was not already explored, we can look at it */ | 
 | 		if (s->ReplUnitTable[first_block] == BLOCK_NOTEXPLORED) { | 
 | 			block = first_block; | 
 | 			chain_length = 0; | 
 | 			do_format_chain = 0; | 
 |  | 
 | 			for (;;) { | 
 | 				/* read the block header. If error, we format the chain */ | 
 | 				if (nftl_read_oob(mtd, | 
 | 						  block * s->EraseSize + 8, 8, | 
 | 						  &retlen, (char *)&h0) < 0 || | 
 | 				    nftl_read_oob(mtd, | 
 | 						  block * s->EraseSize + | 
 | 						  SECTORSIZE + 8, 8, | 
 | 						  &retlen, (char *)&h1) < 0) { | 
 | 					s->ReplUnitTable[block] = BLOCK_NIL; | 
 | 					do_format_chain = 1; | 
 | 					break; | 
 | 				} | 
 |  | 
 | 				logical_block = le16_to_cpu ((h0.VirtUnitNum | h0.SpareVirtUnitNum)); | 
 | 				rep_block = le16_to_cpu ((h0.ReplUnitNum | h0.SpareReplUnitNum)); | 
 | 				erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1)); | 
 |  | 
 | 				is_first_block = !(logical_block >> 15); | 
 | 				logical_block = logical_block & 0x7fff; | 
 |  | 
 | 				/* invalid/free block test */ | 
 | 				if (erase_mark != ERASE_MARK || logical_block >= s->nb_blocks) { | 
 | 					if (chain_length == 0) { | 
 | 						/* if not currently in a chain, we can handle it safely */ | 
 | 						if (check_and_mark_free_block(s, block) < 0) { | 
 | 							/* not really free: format it */ | 
 | 							printk("Formatting block %d\n", block); | 
 | 							if (NFTL_formatblock(s, block) < 0) { | 
 | 								/* could not format: reserve the block */ | 
 | 								s->ReplUnitTable[block] = BLOCK_RESERVED; | 
 | 							} else { | 
 | 								s->ReplUnitTable[block] = BLOCK_FREE; | 
 | 							} | 
 | 						} else { | 
 | 							/* free block: mark it */ | 
 | 							s->ReplUnitTable[block] = BLOCK_FREE; | 
 | 						} | 
 | 						/* directly examine the next block. */ | 
 | 						goto examine_ReplUnitTable; | 
 | 					} else { | 
 | 						/* the block was in a chain : this is bad. We | 
 | 						   must format all the chain */ | 
 | 						printk("Block %d: free but referenced in chain %d\n", | 
 | 						       block, first_block); | 
 | 						s->ReplUnitTable[block] = BLOCK_NIL; | 
 | 						do_format_chain = 1; | 
 | 						break; | 
 | 					} | 
 | 				} | 
 |  | 
 | 				/* we accept only first blocks here */ | 
 | 				if (chain_length == 0) { | 
 | 					/* this block is not the first block in chain : | 
 | 					   ignore it, it will be included in a chain | 
 | 					   later, or marked as not explored */ | 
 | 					if (!is_first_block) | 
 | 						goto examine_ReplUnitTable; | 
 | 					first_logical_block = logical_block; | 
 | 				} else { | 
 | 					if (logical_block != first_logical_block) { | 
 | 						printk("Block %d: incorrect logical block: %d expected: %d\n", | 
 | 						       block, logical_block, first_logical_block); | 
 | 						/* the chain is incorrect : we must format it, | 
 | 						   but we need to read it completely */ | 
 | 						do_format_chain = 1; | 
 | 					} | 
 | 					if (is_first_block) { | 
 | 						/* we accept that a block is marked as first | 
 | 						   block while being last block in a chain | 
 | 						   only if the chain is being folded */ | 
 | 						if (get_fold_mark(s, block) != FOLD_MARK_IN_PROGRESS || | 
 | 						    rep_block != 0xffff) { | 
 | 							printk("Block %d: incorrectly marked as first block in chain\n", | 
 | 							       block); | 
 | 							/* the chain is incorrect : we must format it, | 
 | 							   but we need to read it completely */ | 
 | 							do_format_chain = 1; | 
 | 						} else { | 
 | 							printk("Block %d: folding in progress - ignoring first block flag\n", | 
 | 							       block); | 
 | 						} | 
 | 					} | 
 | 				} | 
 | 				chain_length++; | 
 | 				if (rep_block == 0xffff) { | 
 | 					/* no more blocks after */ | 
 | 					s->ReplUnitTable[block] = BLOCK_NIL; | 
 | 					break; | 
 | 				} else if (rep_block >= s->nb_blocks) { | 
 | 					printk("Block %d: referencing invalid block %d\n", | 
 | 					       block, rep_block); | 
 | 					do_format_chain = 1; | 
 | 					s->ReplUnitTable[block] = BLOCK_NIL; | 
 | 					break; | 
 | 				} else if (s->ReplUnitTable[rep_block] != BLOCK_NOTEXPLORED) { | 
 | 					/* same problem as previous 'is_first_block' test: | 
 | 					   we accept that the last block of a chain has | 
 | 					   the first_block flag set if folding is in | 
 | 					   progress. We handle here the case where the | 
 | 					   last block appeared first */ | 
 | 					if (s->ReplUnitTable[rep_block] == BLOCK_NIL && | 
 | 					    s->EUNtable[first_logical_block] == rep_block && | 
 | 					    get_fold_mark(s, first_block) == FOLD_MARK_IN_PROGRESS) { | 
 | 						/* EUNtable[] will be set after */ | 
 | 						printk("Block %d: folding in progress - ignoring first block flag\n", | 
 | 						       rep_block); | 
 | 						s->ReplUnitTable[block] = rep_block; | 
 | 						s->EUNtable[first_logical_block] = BLOCK_NIL; | 
 | 					} else { | 
 | 						printk("Block %d: referencing block %d already in another chain\n", | 
 | 						       block, rep_block); | 
 | 						/* XXX: should handle correctly fold in progress chains */ | 
 | 						do_format_chain = 1; | 
 | 						s->ReplUnitTable[block] = BLOCK_NIL; | 
 | 					} | 
 | 					break; | 
 | 				} else { | 
 | 					/* this is OK */ | 
 | 					s->ReplUnitTable[block] = rep_block; | 
 | 					block = rep_block; | 
 | 				} | 
 | 			} | 
 |  | 
 | 			/* the chain was completely explored. Now we can decide | 
 | 			   what to do with it */ | 
 | 			if (do_format_chain) { | 
 | 				/* invalid chain : format it */ | 
 | 				format_chain(s, first_block); | 
 | 			} else { | 
 | 				unsigned int first_block1, chain_to_format, chain_length1; | 
 | 				int fold_mark; | 
 |  | 
 | 				/* valid chain : get foldmark */ | 
 | 				fold_mark = get_fold_mark(s, first_block); | 
 | 				if (fold_mark == 0) { | 
 | 					/* cannot get foldmark : format the chain */ | 
 | 					printk("Could read foldmark at block %d\n", first_block); | 
 | 					format_chain(s, first_block); | 
 | 				} else { | 
 | 					if (fold_mark == FOLD_MARK_IN_PROGRESS) | 
 | 						check_sectors_in_chain(s, first_block); | 
 |  | 
 | 					/* now handle the case where we find two chains at the | 
 | 					   same virtual address : we select the longer one, | 
 | 					   because the shorter one is the one which was being | 
 | 					   folded if the folding was not done in place */ | 
 | 					first_block1 = s->EUNtable[first_logical_block]; | 
 | 					if (first_block1 != BLOCK_NIL) { | 
 | 						/* XXX: what to do if same length ? */ | 
 | 						chain_length1 = calc_chain_length(s, first_block1); | 
 | 						printk("Two chains at blocks %d (len=%d) and %d (len=%d)\n", | 
 | 						       first_block1, chain_length1, first_block, chain_length); | 
 |  | 
 | 						if (chain_length >= chain_length1) { | 
 | 							chain_to_format = first_block1; | 
 | 							s->EUNtable[first_logical_block] = first_block; | 
 | 						} else { | 
 | 							chain_to_format = first_block; | 
 | 						} | 
 | 						format_chain(s, chain_to_format); | 
 | 					} else { | 
 | 						s->EUNtable[first_logical_block] = first_block; | 
 | 					} | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	examine_ReplUnitTable:; | 
 | 	} | 
 |  | 
 | 	/* second pass to format unreferenced blocks  and init free block count */ | 
 | 	s->numfreeEUNs = 0; | 
 | 	s->LastFreeEUN = le16_to_cpu(s->MediaHdr.FirstPhysicalEUN); | 
 |  | 
 | 	for (block = 0; block < s->nb_blocks; block++) { | 
 | 		if (s->ReplUnitTable[block] == BLOCK_NOTEXPLORED) { | 
 | 			printk("Unreferenced block %d, formatting it\n", block); | 
 | 			if (NFTL_formatblock(s, block) < 0) | 
 | 				s->ReplUnitTable[block] = BLOCK_RESERVED; | 
 | 			else | 
 | 				s->ReplUnitTable[block] = BLOCK_FREE; | 
 | 		} | 
 | 		if (s->ReplUnitTable[block] == BLOCK_FREE) { | 
 | 			s->numfreeEUNs++; | 
 | 			s->LastFreeEUN = block; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } |