| /* | 
 |  * Partial Parity Log for closing the RAID5 write hole | 
 |  * Copyright (c) 2017, Intel Corporation. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms and conditions of the GNU General Public License, | 
 |  * version 2, as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope it will be useful, but WITHOUT | 
 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |  * more details. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/crc32c.h> | 
 | #include <linux/flex_array.h> | 
 | #include <linux/async_tx.h> | 
 | #include <linux/raid/md_p.h> | 
 | #include "md.h" | 
 | #include "raid5.h" | 
 |  | 
 | /* | 
 |  * PPL consists of a 4KB header (struct ppl_header) and at least 128KB for | 
 |  * partial parity data. The header contains an array of entries | 
 |  * (struct ppl_header_entry) which describe the logged write requests. | 
 |  * Partial parity for the entries comes after the header, written in the same | 
 |  * sequence as the entries: | 
 |  * | 
 |  * Header | 
 |  *   entry0 | 
 |  *   ... | 
 |  *   entryN | 
 |  * PP data | 
 |  *   PP for entry0 | 
 |  *   ... | 
 |  *   PP for entryN | 
 |  * | 
 |  * An entry describes one or more consecutive stripe_heads, up to a full | 
 |  * stripe. The modifed raid data chunks form an m-by-n matrix, where m is the | 
 |  * number of stripe_heads in the entry and n is the number of modified data | 
 |  * disks. Every stripe_head in the entry must write to the same data disks. | 
 |  * An example of a valid case described by a single entry (writes to the first | 
 |  * stripe of a 4 disk array, 16k chunk size): | 
 |  * | 
 |  * sh->sector   dd0   dd1   dd2    ppl | 
 |  *            +-----+-----+-----+ | 
 |  * 0          | --- | --- | --- | +----+ | 
 |  * 8          | -W- | -W- | --- | | pp |   data_sector = 8 | 
 |  * 16         | -W- | -W- | --- | | pp |   data_size = 3 * 2 * 4k | 
 |  * 24         | -W- | -W- | --- | | pp |   pp_size = 3 * 4k | 
 |  *            +-----+-----+-----+ +----+ | 
 |  * | 
 |  * data_sector is the first raid sector of the modified data, data_size is the | 
 |  * total size of modified data and pp_size is the size of partial parity for | 
 |  * this entry. Entries for full stripe writes contain no partial parity | 
 |  * (pp_size = 0), they only mark the stripes for which parity should be | 
 |  * recalculated after an unclean shutdown. Every entry holds a checksum of its | 
 |  * partial parity, the header also has a checksum of the header itself. | 
 |  * | 
 |  * A write request is always logged to the PPL instance stored on the parity | 
 |  * disk of the corresponding stripe. For each member disk there is one ppl_log | 
 |  * used to handle logging for this disk, independently from others. They are | 
 |  * grouped in child_logs array in struct ppl_conf, which is assigned to | 
 |  * r5conf->log_private. | 
 |  * | 
 |  * ppl_io_unit represents a full PPL write, header_page contains the ppl_header. | 
 |  * PPL entries for logged stripes are added in ppl_log_stripe(). A stripe_head | 
 |  * can be appended to the last entry if it meets the conditions for a valid | 
 |  * entry described above, otherwise a new entry is added. Checksums of entries | 
 |  * are calculated incrementally as stripes containing partial parity are being | 
 |  * added. ppl_submit_iounit() calculates the checksum of the header and submits | 
 |  * a bio containing the header page and partial parity pages (sh->ppl_page) for | 
 |  * all stripes of the io_unit. When the PPL write completes, the stripes | 
 |  * associated with the io_unit are released and raid5d starts writing their data | 
 |  * and parity. When all stripes are written, the io_unit is freed and the next | 
 |  * can be submitted. | 
 |  * | 
 |  * An io_unit is used to gather stripes until it is submitted or becomes full | 
 |  * (if the maximum number of entries or size of PPL is reached). Another io_unit | 
 |  * can't be submitted until the previous has completed (PPL and stripe | 
 |  * data+parity is written). The log->io_list tracks all io_units of a log | 
 |  * (for a single member disk). New io_units are added to the end of the list | 
 |  * and the first io_unit is submitted, if it is not submitted already. | 
 |  * The current io_unit accepting new stripes is always at the end of the list. | 
 |  * | 
 |  * If write-back cache is enabled for any of the disks in the array, its data | 
 |  * must be flushed before next io_unit is submitted. | 
 |  */ | 
 |  | 
 | #define PPL_SPACE_SIZE (128 * 1024) | 
 |  | 
 | struct ppl_conf { | 
 | 	struct mddev *mddev; | 
 |  | 
 | 	/* array of child logs, one for each raid disk */ | 
 | 	struct ppl_log *child_logs; | 
 | 	int count; | 
 |  | 
 | 	int block_size;		/* the logical block size used for data_sector | 
 | 				 * in ppl_header_entry */ | 
 | 	u32 signature;		/* raid array identifier */ | 
 | 	atomic64_t seq;		/* current log write sequence number */ | 
 |  | 
 | 	struct kmem_cache *io_kc; | 
 | 	mempool_t io_pool; | 
 | 	struct bio_set bs; | 
 | 	struct bio_set flush_bs; | 
 |  | 
 | 	/* used only for recovery */ | 
 | 	int recovered_entries; | 
 | 	int mismatch_count; | 
 |  | 
 | 	/* stripes to retry if failed to allocate io_unit */ | 
 | 	struct list_head no_mem_stripes; | 
 | 	spinlock_t no_mem_stripes_lock; | 
 | }; | 
 |  | 
 | struct ppl_log { | 
 | 	struct ppl_conf *ppl_conf;	/* shared between all log instances */ | 
 |  | 
 | 	struct md_rdev *rdev;		/* array member disk associated with | 
 | 					 * this log instance */ | 
 | 	struct mutex io_mutex; | 
 | 	struct ppl_io_unit *current_io;	/* current io_unit accepting new data | 
 | 					 * always at the end of io_list */ | 
 | 	spinlock_t io_list_lock; | 
 | 	struct list_head io_list;	/* all io_units of this log */ | 
 |  | 
 | 	sector_t next_io_sector; | 
 | 	unsigned int entry_space; | 
 | 	bool use_multippl; | 
 | 	bool wb_cache_on; | 
 | 	unsigned long disk_flush_bitmap; | 
 | }; | 
 |  | 
 | #define PPL_IO_INLINE_BVECS 32 | 
 |  | 
 | struct ppl_io_unit { | 
 | 	struct ppl_log *log; | 
 |  | 
 | 	struct page *header_page;	/* for ppl_header */ | 
 |  | 
 | 	unsigned int entries_count;	/* number of entries in ppl_header */ | 
 | 	unsigned int pp_size;		/* total size current of partial parity */ | 
 |  | 
 | 	u64 seq;			/* sequence number of this log write */ | 
 | 	struct list_head log_sibling;	/* log->io_list */ | 
 |  | 
 | 	struct list_head stripe_list;	/* stripes added to the io_unit */ | 
 | 	atomic_t pending_stripes;	/* how many stripes not written to raid */ | 
 | 	atomic_t pending_flushes;	/* how many disk flushes are in progress */ | 
 |  | 
 | 	bool submitted;			/* true if write to log started */ | 
 |  | 
 | 	/* inline bio and its biovec for submitting the iounit */ | 
 | 	struct bio bio; | 
 | 	struct bio_vec biovec[PPL_IO_INLINE_BVECS]; | 
 | }; | 
 |  | 
 | struct dma_async_tx_descriptor * | 
 | ops_run_partial_parity(struct stripe_head *sh, struct raid5_percpu *percpu, | 
 | 		       struct dma_async_tx_descriptor *tx) | 
 | { | 
 | 	int disks = sh->disks; | 
 | 	struct page **srcs = flex_array_get(percpu->scribble, 0); | 
 | 	int count = 0, pd_idx = sh->pd_idx, i; | 
 | 	struct async_submit_ctl submit; | 
 |  | 
 | 	pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector); | 
 |  | 
 | 	/* | 
 | 	 * Partial parity is the XOR of stripe data chunks that are not changed | 
 | 	 * during the write request. Depending on available data | 
 | 	 * (read-modify-write vs. reconstruct-write case) we calculate it | 
 | 	 * differently. | 
 | 	 */ | 
 | 	if (sh->reconstruct_state == reconstruct_state_prexor_drain_run) { | 
 | 		/* | 
 | 		 * rmw: xor old data and parity from updated disks | 
 | 		 * This is calculated earlier by ops_run_prexor5() so just copy | 
 | 		 * the parity dev page. | 
 | 		 */ | 
 | 		srcs[count++] = sh->dev[pd_idx].page; | 
 | 	} else if (sh->reconstruct_state == reconstruct_state_drain_run) { | 
 | 		/* rcw: xor data from all not updated disks */ | 
 | 		for (i = disks; i--;) { | 
 | 			struct r5dev *dev = &sh->dev[i]; | 
 | 			if (test_bit(R5_UPTODATE, &dev->flags)) | 
 | 				srcs[count++] = dev->page; | 
 | 		} | 
 | 	} else { | 
 | 		return tx; | 
 | 	} | 
 |  | 
 | 	init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST, tx, | 
 | 			  NULL, sh, flex_array_get(percpu->scribble, 0) | 
 | 			  + sizeof(struct page *) * (sh->disks + 2)); | 
 |  | 
 | 	if (count == 1) | 
 | 		tx = async_memcpy(sh->ppl_page, srcs[0], 0, 0, PAGE_SIZE, | 
 | 				  &submit); | 
 | 	else | 
 | 		tx = async_xor(sh->ppl_page, srcs, 0, count, PAGE_SIZE, | 
 | 			       &submit); | 
 |  | 
 | 	return tx; | 
 | } | 
 |  | 
 | static void *ppl_io_pool_alloc(gfp_t gfp_mask, void *pool_data) | 
 | { | 
 | 	struct kmem_cache *kc = pool_data; | 
 | 	struct ppl_io_unit *io; | 
 |  | 
 | 	io = kmem_cache_alloc(kc, gfp_mask); | 
 | 	if (!io) | 
 | 		return NULL; | 
 |  | 
 | 	io->header_page = alloc_page(gfp_mask); | 
 | 	if (!io->header_page) { | 
 | 		kmem_cache_free(kc, io); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	return io; | 
 | } | 
 |  | 
 | static void ppl_io_pool_free(void *element, void *pool_data) | 
 | { | 
 | 	struct kmem_cache *kc = pool_data; | 
 | 	struct ppl_io_unit *io = element; | 
 |  | 
 | 	__free_page(io->header_page); | 
 | 	kmem_cache_free(kc, io); | 
 | } | 
 |  | 
 | static struct ppl_io_unit *ppl_new_iounit(struct ppl_log *log, | 
 | 					  struct stripe_head *sh) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct ppl_io_unit *io; | 
 | 	struct ppl_header *pplhdr; | 
 | 	struct page *header_page; | 
 |  | 
 | 	io = mempool_alloc(&ppl_conf->io_pool, GFP_NOWAIT); | 
 | 	if (!io) | 
 | 		return NULL; | 
 |  | 
 | 	header_page = io->header_page; | 
 | 	memset(io, 0, sizeof(*io)); | 
 | 	io->header_page = header_page; | 
 |  | 
 | 	io->log = log; | 
 | 	INIT_LIST_HEAD(&io->log_sibling); | 
 | 	INIT_LIST_HEAD(&io->stripe_list); | 
 | 	atomic_set(&io->pending_stripes, 0); | 
 | 	atomic_set(&io->pending_flushes, 0); | 
 | 	bio_init(&io->bio, io->biovec, PPL_IO_INLINE_BVECS); | 
 |  | 
 | 	pplhdr = page_address(io->header_page); | 
 | 	clear_page(pplhdr); | 
 | 	memset(pplhdr->reserved, 0xff, PPL_HDR_RESERVED); | 
 | 	pplhdr->signature = cpu_to_le32(ppl_conf->signature); | 
 |  | 
 | 	io->seq = atomic64_add_return(1, &ppl_conf->seq); | 
 | 	pplhdr->generation = cpu_to_le64(io->seq); | 
 |  | 
 | 	return io; | 
 | } | 
 |  | 
 | static int ppl_log_stripe(struct ppl_log *log, struct stripe_head *sh) | 
 | { | 
 | 	struct ppl_io_unit *io = log->current_io; | 
 | 	struct ppl_header_entry *e = NULL; | 
 | 	struct ppl_header *pplhdr; | 
 | 	int i; | 
 | 	sector_t data_sector = 0; | 
 | 	int data_disks = 0; | 
 | 	struct r5conf *conf = sh->raid_conf; | 
 |  | 
 | 	pr_debug("%s: stripe: %llu\n", __func__, (unsigned long long)sh->sector); | 
 |  | 
 | 	/* check if current io_unit is full */ | 
 | 	if (io && (io->pp_size == log->entry_space || | 
 | 		   io->entries_count == PPL_HDR_MAX_ENTRIES)) { | 
 | 		pr_debug("%s: add io_unit blocked by seq: %llu\n", | 
 | 			 __func__, io->seq); | 
 | 		io = NULL; | 
 | 	} | 
 |  | 
 | 	/* add a new unit if there is none or the current is full */ | 
 | 	if (!io) { | 
 | 		io = ppl_new_iounit(log, sh); | 
 | 		if (!io) | 
 | 			return -ENOMEM; | 
 | 		spin_lock_irq(&log->io_list_lock); | 
 | 		list_add_tail(&io->log_sibling, &log->io_list); | 
 | 		spin_unlock_irq(&log->io_list_lock); | 
 |  | 
 | 		log->current_io = io; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < sh->disks; i++) { | 
 | 		struct r5dev *dev = &sh->dev[i]; | 
 |  | 
 | 		if (i != sh->pd_idx && test_bit(R5_Wantwrite, &dev->flags)) { | 
 | 			if (!data_disks || dev->sector < data_sector) | 
 | 				data_sector = dev->sector; | 
 | 			data_disks++; | 
 | 		} | 
 | 	} | 
 | 	BUG_ON(!data_disks); | 
 |  | 
 | 	pr_debug("%s: seq: %llu data_sector: %llu data_disks: %d\n", __func__, | 
 | 		 io->seq, (unsigned long long)data_sector, data_disks); | 
 |  | 
 | 	pplhdr = page_address(io->header_page); | 
 |  | 
 | 	if (io->entries_count > 0) { | 
 | 		struct ppl_header_entry *last = | 
 | 				&pplhdr->entries[io->entries_count - 1]; | 
 | 		struct stripe_head *sh_last = list_last_entry( | 
 | 				&io->stripe_list, struct stripe_head, log_list); | 
 | 		u64 data_sector_last = le64_to_cpu(last->data_sector); | 
 | 		u32 data_size_last = le32_to_cpu(last->data_size); | 
 |  | 
 | 		/* | 
 | 		 * Check if we can append the stripe to the last entry. It must | 
 | 		 * be just after the last logged stripe and write to the same | 
 | 		 * disks. Use bit shift and logarithm to avoid 64-bit division. | 
 | 		 */ | 
 | 		if ((sh->sector == sh_last->sector + STRIPE_SECTORS) && | 
 | 		    (data_sector >> ilog2(conf->chunk_sectors) == | 
 | 		     data_sector_last >> ilog2(conf->chunk_sectors)) && | 
 | 		    ((data_sector - data_sector_last) * data_disks == | 
 | 		     data_size_last >> 9)) | 
 | 			e = last; | 
 | 	} | 
 |  | 
 | 	if (!e) { | 
 | 		e = &pplhdr->entries[io->entries_count++]; | 
 | 		e->data_sector = cpu_to_le64(data_sector); | 
 | 		e->parity_disk = cpu_to_le32(sh->pd_idx); | 
 | 		e->checksum = cpu_to_le32(~0); | 
 | 	} | 
 |  | 
 | 	le32_add_cpu(&e->data_size, data_disks << PAGE_SHIFT); | 
 |  | 
 | 	/* don't write any PP if full stripe write */ | 
 | 	if (!test_bit(STRIPE_FULL_WRITE, &sh->state)) { | 
 | 		le32_add_cpu(&e->pp_size, PAGE_SIZE); | 
 | 		io->pp_size += PAGE_SIZE; | 
 | 		e->checksum = cpu_to_le32(crc32c_le(le32_to_cpu(e->checksum), | 
 | 						    page_address(sh->ppl_page), | 
 | 						    PAGE_SIZE)); | 
 | 	} | 
 |  | 
 | 	list_add_tail(&sh->log_list, &io->stripe_list); | 
 | 	atomic_inc(&io->pending_stripes); | 
 | 	sh->ppl_io = io; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ppl_write_stripe(struct r5conf *conf, struct stripe_head *sh) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = conf->log_private; | 
 | 	struct ppl_io_unit *io = sh->ppl_io; | 
 | 	struct ppl_log *log; | 
 |  | 
 | 	if (io || test_bit(STRIPE_SYNCING, &sh->state) || !sh->ppl_page || | 
 | 	    !test_bit(R5_Wantwrite, &sh->dev[sh->pd_idx].flags) || | 
 | 	    !test_bit(R5_Insync, &sh->dev[sh->pd_idx].flags)) { | 
 | 		clear_bit(STRIPE_LOG_TRAPPED, &sh->state); | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | 	log = &ppl_conf->child_logs[sh->pd_idx]; | 
 |  | 
 | 	mutex_lock(&log->io_mutex); | 
 |  | 
 | 	if (!log->rdev || test_bit(Faulty, &log->rdev->flags)) { | 
 | 		mutex_unlock(&log->io_mutex); | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | 	set_bit(STRIPE_LOG_TRAPPED, &sh->state); | 
 | 	clear_bit(STRIPE_DELAYED, &sh->state); | 
 | 	atomic_inc(&sh->count); | 
 |  | 
 | 	if (ppl_log_stripe(log, sh)) { | 
 | 		spin_lock_irq(&ppl_conf->no_mem_stripes_lock); | 
 | 		list_add_tail(&sh->log_list, &ppl_conf->no_mem_stripes); | 
 | 		spin_unlock_irq(&ppl_conf->no_mem_stripes_lock); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&log->io_mutex); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ppl_log_endio(struct bio *bio) | 
 | { | 
 | 	struct ppl_io_unit *io = bio->bi_private; | 
 | 	struct ppl_log *log = io->log; | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct stripe_head *sh, *next; | 
 |  | 
 | 	pr_debug("%s: seq: %llu\n", __func__, io->seq); | 
 |  | 
 | 	if (bio->bi_status) | 
 | 		md_error(ppl_conf->mddev, log->rdev); | 
 |  | 
 | 	list_for_each_entry_safe(sh, next, &io->stripe_list, log_list) { | 
 | 		list_del_init(&sh->log_list); | 
 |  | 
 | 		set_bit(STRIPE_HANDLE, &sh->state); | 
 | 		raid5_release_stripe(sh); | 
 | 	} | 
 | } | 
 |  | 
 | static void ppl_submit_iounit_bio(struct ppl_io_unit *io, struct bio *bio) | 
 | { | 
 | 	char b[BDEVNAME_SIZE]; | 
 |  | 
 | 	pr_debug("%s: seq: %llu size: %u sector: %llu dev: %s\n", | 
 | 		 __func__, io->seq, bio->bi_iter.bi_size, | 
 | 		 (unsigned long long)bio->bi_iter.bi_sector, | 
 | 		 bio_devname(bio, b)); | 
 |  | 
 | 	submit_bio(bio); | 
 | } | 
 |  | 
 | static void ppl_submit_iounit(struct ppl_io_unit *io) | 
 | { | 
 | 	struct ppl_log *log = io->log; | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct ppl_header *pplhdr = page_address(io->header_page); | 
 | 	struct bio *bio = &io->bio; | 
 | 	struct stripe_head *sh; | 
 | 	int i; | 
 |  | 
 | 	bio->bi_private = io; | 
 |  | 
 | 	if (!log->rdev || test_bit(Faulty, &log->rdev->flags)) { | 
 | 		ppl_log_endio(bio); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < io->entries_count; i++) { | 
 | 		struct ppl_header_entry *e = &pplhdr->entries[i]; | 
 |  | 
 | 		pr_debug("%s: seq: %llu entry: %d data_sector: %llu pp_size: %u data_size: %u\n", | 
 | 			 __func__, io->seq, i, le64_to_cpu(e->data_sector), | 
 | 			 le32_to_cpu(e->pp_size), le32_to_cpu(e->data_size)); | 
 |  | 
 | 		e->data_sector = cpu_to_le64(le64_to_cpu(e->data_sector) >> | 
 | 					     ilog2(ppl_conf->block_size >> 9)); | 
 | 		e->checksum = cpu_to_le32(~le32_to_cpu(e->checksum)); | 
 | 	} | 
 |  | 
 | 	pplhdr->entries_count = cpu_to_le32(io->entries_count); | 
 | 	pplhdr->checksum = cpu_to_le32(~crc32c_le(~0, pplhdr, PPL_HEADER_SIZE)); | 
 |  | 
 | 	/* Rewind the buffer if current PPL is larger then remaining space */ | 
 | 	if (log->use_multippl && | 
 | 	    log->rdev->ppl.sector + log->rdev->ppl.size - log->next_io_sector < | 
 | 	    (PPL_HEADER_SIZE + io->pp_size) >> 9) | 
 | 		log->next_io_sector = log->rdev->ppl.sector; | 
 |  | 
 |  | 
 | 	bio->bi_end_io = ppl_log_endio; | 
 | 	bio->bi_opf = REQ_OP_WRITE | REQ_FUA; | 
 | 	bio_set_dev(bio, log->rdev->bdev); | 
 | 	bio->bi_iter.bi_sector = log->next_io_sector; | 
 | 	bio_add_page(bio, io->header_page, PAGE_SIZE, 0); | 
 |  | 
 | 	pr_debug("%s: log->current_io_sector: %llu\n", __func__, | 
 | 	    (unsigned long long)log->next_io_sector); | 
 |  | 
 | 	if (log->use_multippl) | 
 | 		log->next_io_sector += (PPL_HEADER_SIZE + io->pp_size) >> 9; | 
 |  | 
 | 	WARN_ON(log->disk_flush_bitmap != 0); | 
 |  | 
 | 	list_for_each_entry(sh, &io->stripe_list, log_list) { | 
 | 		for (i = 0; i < sh->disks; i++) { | 
 | 			struct r5dev *dev = &sh->dev[i]; | 
 |  | 
 | 			if ((ppl_conf->child_logs[i].wb_cache_on) && | 
 | 			    (test_bit(R5_Wantwrite, &dev->flags))) { | 
 | 				set_bit(i, &log->disk_flush_bitmap); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* entries for full stripe writes have no partial parity */ | 
 | 		if (test_bit(STRIPE_FULL_WRITE, &sh->state)) | 
 | 			continue; | 
 |  | 
 | 		if (!bio_add_page(bio, sh->ppl_page, PAGE_SIZE, 0)) { | 
 | 			struct bio *prev = bio; | 
 |  | 
 | 			bio = bio_alloc_bioset(GFP_NOIO, BIO_MAX_PAGES, | 
 | 					       &ppl_conf->bs); | 
 | 			bio->bi_opf = prev->bi_opf; | 
 | 			bio_copy_dev(bio, prev); | 
 | 			bio->bi_iter.bi_sector = bio_end_sector(prev); | 
 | 			bio_add_page(bio, sh->ppl_page, PAGE_SIZE, 0); | 
 |  | 
 | 			bio_chain(bio, prev); | 
 | 			ppl_submit_iounit_bio(io, prev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ppl_submit_iounit_bio(io, bio); | 
 | } | 
 |  | 
 | static void ppl_submit_current_io(struct ppl_log *log) | 
 | { | 
 | 	struct ppl_io_unit *io; | 
 |  | 
 | 	spin_lock_irq(&log->io_list_lock); | 
 |  | 
 | 	io = list_first_entry_or_null(&log->io_list, struct ppl_io_unit, | 
 | 				      log_sibling); | 
 | 	if (io && io->submitted) | 
 | 		io = NULL; | 
 |  | 
 | 	spin_unlock_irq(&log->io_list_lock); | 
 |  | 
 | 	if (io) { | 
 | 		io->submitted = true; | 
 |  | 
 | 		if (io == log->current_io) | 
 | 			log->current_io = NULL; | 
 |  | 
 | 		ppl_submit_iounit(io); | 
 | 	} | 
 | } | 
 |  | 
 | void ppl_write_stripe_run(struct r5conf *conf) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = conf->log_private; | 
 | 	struct ppl_log *log; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ppl_conf->count; i++) { | 
 | 		log = &ppl_conf->child_logs[i]; | 
 |  | 
 | 		mutex_lock(&log->io_mutex); | 
 | 		ppl_submit_current_io(log); | 
 | 		mutex_unlock(&log->io_mutex); | 
 | 	} | 
 | } | 
 |  | 
 | static void ppl_io_unit_finished(struct ppl_io_unit *io) | 
 | { | 
 | 	struct ppl_log *log = io->log; | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct r5conf *conf = ppl_conf->mddev->private; | 
 | 	unsigned long flags; | 
 |  | 
 | 	pr_debug("%s: seq: %llu\n", __func__, io->seq); | 
 |  | 
 | 	local_irq_save(flags); | 
 |  | 
 | 	spin_lock(&log->io_list_lock); | 
 | 	list_del(&io->log_sibling); | 
 | 	spin_unlock(&log->io_list_lock); | 
 |  | 
 | 	mempool_free(io, &ppl_conf->io_pool); | 
 |  | 
 | 	spin_lock(&ppl_conf->no_mem_stripes_lock); | 
 | 	if (!list_empty(&ppl_conf->no_mem_stripes)) { | 
 | 		struct stripe_head *sh; | 
 |  | 
 | 		sh = list_first_entry(&ppl_conf->no_mem_stripes, | 
 | 				      struct stripe_head, log_list); | 
 | 		list_del_init(&sh->log_list); | 
 | 		set_bit(STRIPE_HANDLE, &sh->state); | 
 | 		raid5_release_stripe(sh); | 
 | 	} | 
 | 	spin_unlock(&ppl_conf->no_mem_stripes_lock); | 
 |  | 
 | 	local_irq_restore(flags); | 
 |  | 
 | 	wake_up(&conf->wait_for_quiescent); | 
 | } | 
 |  | 
 | static void ppl_flush_endio(struct bio *bio) | 
 | { | 
 | 	struct ppl_io_unit *io = bio->bi_private; | 
 | 	struct ppl_log *log = io->log; | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct r5conf *conf = ppl_conf->mddev->private; | 
 | 	char b[BDEVNAME_SIZE]; | 
 |  | 
 | 	pr_debug("%s: dev: %s\n", __func__, bio_devname(bio, b)); | 
 |  | 
 | 	if (bio->bi_status) { | 
 | 		struct md_rdev *rdev; | 
 |  | 
 | 		rcu_read_lock(); | 
 | 		rdev = md_find_rdev_rcu(conf->mddev, bio_dev(bio)); | 
 | 		if (rdev) | 
 | 			md_error(rdev->mddev, rdev); | 
 | 		rcu_read_unlock(); | 
 | 	} | 
 |  | 
 | 	bio_put(bio); | 
 |  | 
 | 	if (atomic_dec_and_test(&io->pending_flushes)) { | 
 | 		ppl_io_unit_finished(io); | 
 | 		md_wakeup_thread(conf->mddev->thread); | 
 | 	} | 
 | } | 
 |  | 
 | static void ppl_do_flush(struct ppl_io_unit *io) | 
 | { | 
 | 	struct ppl_log *log = io->log; | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct r5conf *conf = ppl_conf->mddev->private; | 
 | 	int raid_disks = conf->raid_disks; | 
 | 	int flushed_disks = 0; | 
 | 	int i; | 
 |  | 
 | 	atomic_set(&io->pending_flushes, raid_disks); | 
 |  | 
 | 	for_each_set_bit(i, &log->disk_flush_bitmap, raid_disks) { | 
 | 		struct md_rdev *rdev; | 
 | 		struct block_device *bdev = NULL; | 
 |  | 
 | 		rcu_read_lock(); | 
 | 		rdev = rcu_dereference(conf->disks[i].rdev); | 
 | 		if (rdev && !test_bit(Faulty, &rdev->flags)) | 
 | 			bdev = rdev->bdev; | 
 | 		rcu_read_unlock(); | 
 |  | 
 | 		if (bdev) { | 
 | 			struct bio *bio; | 
 | 			char b[BDEVNAME_SIZE]; | 
 |  | 
 | 			bio = bio_alloc_bioset(GFP_NOIO, 0, &ppl_conf->flush_bs); | 
 | 			bio_set_dev(bio, bdev); | 
 | 			bio->bi_private = io; | 
 | 			bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH; | 
 | 			bio->bi_end_io = ppl_flush_endio; | 
 |  | 
 | 			pr_debug("%s: dev: %s\n", __func__, | 
 | 				 bio_devname(bio, b)); | 
 |  | 
 | 			submit_bio(bio); | 
 | 			flushed_disks++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	log->disk_flush_bitmap = 0; | 
 |  | 
 | 	for (i = flushed_disks ; i < raid_disks; i++) { | 
 | 		if (atomic_dec_and_test(&io->pending_flushes)) | 
 | 			ppl_io_unit_finished(io); | 
 | 	} | 
 | } | 
 |  | 
 | static inline bool ppl_no_io_unit_submitted(struct r5conf *conf, | 
 | 					    struct ppl_log *log) | 
 | { | 
 | 	struct ppl_io_unit *io; | 
 |  | 
 | 	io = list_first_entry_or_null(&log->io_list, struct ppl_io_unit, | 
 | 				      log_sibling); | 
 |  | 
 | 	return !io || !io->submitted; | 
 | } | 
 |  | 
 | void ppl_quiesce(struct r5conf *conf, int quiesce) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = conf->log_private; | 
 | 	int i; | 
 |  | 
 | 	if (quiesce) { | 
 | 		for (i = 0; i < ppl_conf->count; i++) { | 
 | 			struct ppl_log *log = &ppl_conf->child_logs[i]; | 
 |  | 
 | 			spin_lock_irq(&log->io_list_lock); | 
 | 			wait_event_lock_irq(conf->wait_for_quiescent, | 
 | 					    ppl_no_io_unit_submitted(conf, log), | 
 | 					    log->io_list_lock); | 
 | 			spin_unlock_irq(&log->io_list_lock); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | int ppl_handle_flush_request(struct r5l_log *log, struct bio *bio) | 
 | { | 
 | 	if (bio->bi_iter.bi_size == 0) { | 
 | 		bio_endio(bio); | 
 | 		return 0; | 
 | 	} | 
 | 	bio->bi_opf &= ~REQ_PREFLUSH; | 
 | 	return -EAGAIN; | 
 | } | 
 |  | 
 | void ppl_stripe_write_finished(struct stripe_head *sh) | 
 | { | 
 | 	struct ppl_io_unit *io; | 
 |  | 
 | 	io = sh->ppl_io; | 
 | 	sh->ppl_io = NULL; | 
 |  | 
 | 	if (io && atomic_dec_and_test(&io->pending_stripes)) { | 
 | 		if (io->log->disk_flush_bitmap) | 
 | 			ppl_do_flush(io); | 
 | 		else | 
 | 			ppl_io_unit_finished(io); | 
 | 	} | 
 | } | 
 |  | 
 | static void ppl_xor(int size, struct page *page1, struct page *page2) | 
 | { | 
 | 	struct async_submit_ctl submit; | 
 | 	struct dma_async_tx_descriptor *tx; | 
 | 	struct page *xor_srcs[] = { page1, page2 }; | 
 |  | 
 | 	init_async_submit(&submit, ASYNC_TX_ACK|ASYNC_TX_XOR_DROP_DST, | 
 | 			  NULL, NULL, NULL, NULL); | 
 | 	tx = async_xor(page1, xor_srcs, 0, 2, size, &submit); | 
 |  | 
 | 	async_tx_quiesce(&tx); | 
 | } | 
 |  | 
 | /* | 
 |  * PPL recovery strategy: xor partial parity and data from all modified data | 
 |  * disks within a stripe and write the result as the new stripe parity. If all | 
 |  * stripe data disks are modified (full stripe write), no partial parity is | 
 |  * available, so just xor the data disks. | 
 |  * | 
 |  * Recovery of a PPL entry shall occur only if all modified data disks are | 
 |  * available and read from all of them succeeds. | 
 |  * | 
 |  * A PPL entry applies to a stripe, partial parity size for an entry is at most | 
 |  * the size of the chunk. Examples of possible cases for a single entry: | 
 |  * | 
 |  * case 0: single data disk write: | 
 |  *   data0    data1    data2     ppl        parity | 
 |  * +--------+--------+--------+           +--------------------+ | 
 |  * | ------ | ------ | ------ | +----+    | (no change)        | | 
 |  * | ------ | -data- | ------ | | pp | -> | data1 ^ pp         | | 
 |  * | ------ | -data- | ------ | | pp | -> | data1 ^ pp         | | 
 |  * | ------ | ------ | ------ | +----+    | (no change)        | | 
 |  * +--------+--------+--------+           +--------------------+ | 
 |  * pp_size = data_size | 
 |  * | 
 |  * case 1: more than one data disk write: | 
 |  *   data0    data1    data2     ppl        parity | 
 |  * +--------+--------+--------+           +--------------------+ | 
 |  * | ------ | ------ | ------ | +----+    | (no change)        | | 
 |  * | -data- | -data- | ------ | | pp | -> | data0 ^ data1 ^ pp | | 
 |  * | -data- | -data- | ------ | | pp | -> | data0 ^ data1 ^ pp | | 
 |  * | ------ | ------ | ------ | +----+    | (no change)        | | 
 |  * +--------+--------+--------+           +--------------------+ | 
 |  * pp_size = data_size / modified_data_disks | 
 |  * | 
 |  * case 2: write to all data disks (also full stripe write): | 
 |  *   data0    data1    data2                parity | 
 |  * +--------+--------+--------+           +--------------------+ | 
 |  * | ------ | ------ | ------ |           | (no change)        | | 
 |  * | -data- | -data- | -data- | --------> | xor all data       | | 
 |  * | ------ | ------ | ------ | --------> | (no change)        | | 
 |  * | ------ | ------ | ------ |           | (no change)        | | 
 |  * +--------+--------+--------+           +--------------------+ | 
 |  * pp_size = 0 | 
 |  * | 
 |  * The following cases are possible only in other implementations. The recovery | 
 |  * code can handle them, but they are not generated at runtime because they can | 
 |  * be reduced to cases 0, 1 and 2: | 
 |  * | 
 |  * case 3: | 
 |  *   data0    data1    data2     ppl        parity | 
 |  * +--------+--------+--------+ +----+    +--------------------+ | 
 |  * | ------ | -data- | -data- | | pp |    | data1 ^ data2 ^ pp | | 
 |  * | ------ | -data- | -data- | | pp | -> | data1 ^ data2 ^ pp | | 
 |  * | -data- | -data- | -data- | | -- | -> | xor all data       | | 
 |  * | -data- | -data- | ------ | | pp |    | data0 ^ data1 ^ pp | | 
 |  * +--------+--------+--------+ +----+    +--------------------+ | 
 |  * pp_size = chunk_size | 
 |  * | 
 |  * case 4: | 
 |  *   data0    data1    data2     ppl        parity | 
 |  * +--------+--------+--------+ +----+    +--------------------+ | 
 |  * | ------ | -data- | ------ | | pp |    | data1 ^ pp         | | 
 |  * | ------ | ------ | ------ | | -- | -> | (no change)        | | 
 |  * | ------ | ------ | ------ | | -- | -> | (no change)        | | 
 |  * | -data- | ------ | ------ | | pp |    | data0 ^ pp         | | 
 |  * +--------+--------+--------+ +----+    +--------------------+ | 
 |  * pp_size = chunk_size | 
 |  */ | 
 | static int ppl_recover_entry(struct ppl_log *log, struct ppl_header_entry *e, | 
 | 			     sector_t ppl_sector) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct mddev *mddev = ppl_conf->mddev; | 
 | 	struct r5conf *conf = mddev->private; | 
 | 	int block_size = ppl_conf->block_size; | 
 | 	struct page *page1; | 
 | 	struct page *page2; | 
 | 	sector_t r_sector_first; | 
 | 	sector_t r_sector_last; | 
 | 	int strip_sectors; | 
 | 	int data_disks; | 
 | 	int i; | 
 | 	int ret = 0; | 
 | 	char b[BDEVNAME_SIZE]; | 
 | 	unsigned int pp_size = le32_to_cpu(e->pp_size); | 
 | 	unsigned int data_size = le32_to_cpu(e->data_size); | 
 |  | 
 | 	page1 = alloc_page(GFP_KERNEL); | 
 | 	page2 = alloc_page(GFP_KERNEL); | 
 |  | 
 | 	if (!page1 || !page2) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	r_sector_first = le64_to_cpu(e->data_sector) * (block_size >> 9); | 
 |  | 
 | 	if ((pp_size >> 9) < conf->chunk_sectors) { | 
 | 		if (pp_size > 0) { | 
 | 			data_disks = data_size / pp_size; | 
 | 			strip_sectors = pp_size >> 9; | 
 | 		} else { | 
 | 			data_disks = conf->raid_disks - conf->max_degraded; | 
 | 			strip_sectors = (data_size >> 9) / data_disks; | 
 | 		} | 
 | 		r_sector_last = r_sector_first + | 
 | 				(data_disks - 1) * conf->chunk_sectors + | 
 | 				strip_sectors; | 
 | 	} else { | 
 | 		data_disks = conf->raid_disks - conf->max_degraded; | 
 | 		strip_sectors = conf->chunk_sectors; | 
 | 		r_sector_last = r_sector_first + (data_size >> 9); | 
 | 	} | 
 |  | 
 | 	pr_debug("%s: array sector first: %llu last: %llu\n", __func__, | 
 | 		 (unsigned long long)r_sector_first, | 
 | 		 (unsigned long long)r_sector_last); | 
 |  | 
 | 	/* if start and end is 4k aligned, use a 4k block */ | 
 | 	if (block_size == 512 && | 
 | 	    (r_sector_first & (STRIPE_SECTORS - 1)) == 0 && | 
 | 	    (r_sector_last & (STRIPE_SECTORS - 1)) == 0) | 
 | 		block_size = STRIPE_SIZE; | 
 |  | 
 | 	/* iterate through blocks in strip */ | 
 | 	for (i = 0; i < strip_sectors; i += (block_size >> 9)) { | 
 | 		bool update_parity = false; | 
 | 		sector_t parity_sector; | 
 | 		struct md_rdev *parity_rdev; | 
 | 		struct stripe_head sh; | 
 | 		int disk; | 
 | 		int indent = 0; | 
 |  | 
 | 		pr_debug("%s:%*s iter %d start\n", __func__, indent, "", i); | 
 | 		indent += 2; | 
 |  | 
 | 		memset(page_address(page1), 0, PAGE_SIZE); | 
 |  | 
 | 		/* iterate through data member disks */ | 
 | 		for (disk = 0; disk < data_disks; disk++) { | 
 | 			int dd_idx; | 
 | 			struct md_rdev *rdev; | 
 | 			sector_t sector; | 
 | 			sector_t r_sector = r_sector_first + i + | 
 | 					    (disk * conf->chunk_sectors); | 
 |  | 
 | 			pr_debug("%s:%*s data member disk %d start\n", | 
 | 				 __func__, indent, "", disk); | 
 | 			indent += 2; | 
 |  | 
 | 			if (r_sector >= r_sector_last) { | 
 | 				pr_debug("%s:%*s array sector %llu doesn't need parity update\n", | 
 | 					 __func__, indent, "", | 
 | 					 (unsigned long long)r_sector); | 
 | 				indent -= 2; | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			update_parity = true; | 
 |  | 
 | 			/* map raid sector to member disk */ | 
 | 			sector = raid5_compute_sector(conf, r_sector, 0, | 
 | 						      &dd_idx, NULL); | 
 | 			pr_debug("%s:%*s processing array sector %llu => data member disk %d, sector %llu\n", | 
 | 				 __func__, indent, "", | 
 | 				 (unsigned long long)r_sector, dd_idx, | 
 | 				 (unsigned long long)sector); | 
 |  | 
 | 			rdev = conf->disks[dd_idx].rdev; | 
 | 			if (!rdev || (!test_bit(In_sync, &rdev->flags) && | 
 | 				      sector >= rdev->recovery_offset)) { | 
 | 				pr_debug("%s:%*s data member disk %d missing\n", | 
 | 					 __func__, indent, "", dd_idx); | 
 | 				update_parity = false; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			pr_debug("%s:%*s reading data member disk %s sector %llu\n", | 
 | 				 __func__, indent, "", bdevname(rdev->bdev, b), | 
 | 				 (unsigned long long)sector); | 
 | 			if (!sync_page_io(rdev, sector, block_size, page2, | 
 | 					REQ_OP_READ, 0, false)) { | 
 | 				md_error(mddev, rdev); | 
 | 				pr_debug("%s:%*s read failed!\n", __func__, | 
 | 					 indent, ""); | 
 | 				ret = -EIO; | 
 | 				goto out; | 
 | 			} | 
 |  | 
 | 			ppl_xor(block_size, page1, page2); | 
 |  | 
 | 			indent -= 2; | 
 | 		} | 
 |  | 
 | 		if (!update_parity) | 
 | 			continue; | 
 |  | 
 | 		if (pp_size > 0) { | 
 | 			pr_debug("%s:%*s reading pp disk sector %llu\n", | 
 | 				 __func__, indent, "", | 
 | 				 (unsigned long long)(ppl_sector + i)); | 
 | 			if (!sync_page_io(log->rdev, | 
 | 					ppl_sector - log->rdev->data_offset + i, | 
 | 					block_size, page2, REQ_OP_READ, 0, | 
 | 					false)) { | 
 | 				pr_debug("%s:%*s read failed!\n", __func__, | 
 | 					 indent, ""); | 
 | 				md_error(mddev, log->rdev); | 
 | 				ret = -EIO; | 
 | 				goto out; | 
 | 			} | 
 |  | 
 | 			ppl_xor(block_size, page1, page2); | 
 | 		} | 
 |  | 
 | 		/* map raid sector to parity disk */ | 
 | 		parity_sector = raid5_compute_sector(conf, r_sector_first + i, | 
 | 				0, &disk, &sh); | 
 | 		BUG_ON(sh.pd_idx != le32_to_cpu(e->parity_disk)); | 
 | 		parity_rdev = conf->disks[sh.pd_idx].rdev; | 
 |  | 
 | 		BUG_ON(parity_rdev->bdev->bd_dev != log->rdev->bdev->bd_dev); | 
 | 		pr_debug("%s:%*s write parity at sector %llu, disk %s\n", | 
 | 			 __func__, indent, "", | 
 | 			 (unsigned long long)parity_sector, | 
 | 			 bdevname(parity_rdev->bdev, b)); | 
 | 		if (!sync_page_io(parity_rdev, parity_sector, block_size, | 
 | 				page1, REQ_OP_WRITE, 0, false)) { | 
 | 			pr_debug("%s:%*s parity write error!\n", __func__, | 
 | 				 indent, ""); | 
 | 			md_error(mddev, parity_rdev); | 
 | 			ret = -EIO; | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 | out: | 
 | 	if (page1) | 
 | 		__free_page(page1); | 
 | 	if (page2) | 
 | 		__free_page(page2); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ppl_recover(struct ppl_log *log, struct ppl_header *pplhdr, | 
 | 		       sector_t offset) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct md_rdev *rdev = log->rdev; | 
 | 	struct mddev *mddev = rdev->mddev; | 
 | 	sector_t ppl_sector = rdev->ppl.sector + offset + | 
 | 			      (PPL_HEADER_SIZE >> 9); | 
 | 	struct page *page; | 
 | 	int i; | 
 | 	int ret = 0; | 
 |  | 
 | 	page = alloc_page(GFP_KERNEL); | 
 | 	if (!page) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* iterate through all PPL entries saved */ | 
 | 	for (i = 0; i < le32_to_cpu(pplhdr->entries_count); i++) { | 
 | 		struct ppl_header_entry *e = &pplhdr->entries[i]; | 
 | 		u32 pp_size = le32_to_cpu(e->pp_size); | 
 | 		sector_t sector = ppl_sector; | 
 | 		int ppl_entry_sectors = pp_size >> 9; | 
 | 		u32 crc, crc_stored; | 
 |  | 
 | 		pr_debug("%s: disk: %d entry: %d ppl_sector: %llu pp_size: %u\n", | 
 | 			 __func__, rdev->raid_disk, i, | 
 | 			 (unsigned long long)ppl_sector, pp_size); | 
 |  | 
 | 		crc = ~0; | 
 | 		crc_stored = le32_to_cpu(e->checksum); | 
 |  | 
 | 		/* read parial parity for this entry and calculate its checksum */ | 
 | 		while (pp_size) { | 
 | 			int s = pp_size > PAGE_SIZE ? PAGE_SIZE : pp_size; | 
 |  | 
 | 			if (!sync_page_io(rdev, sector - rdev->data_offset, | 
 | 					s, page, REQ_OP_READ, 0, false)) { | 
 | 				md_error(mddev, rdev); | 
 | 				ret = -EIO; | 
 | 				goto out; | 
 | 			} | 
 |  | 
 | 			crc = crc32c_le(crc, page_address(page), s); | 
 |  | 
 | 			pp_size -= s; | 
 | 			sector += s >> 9; | 
 | 		} | 
 |  | 
 | 		crc = ~crc; | 
 |  | 
 | 		if (crc != crc_stored) { | 
 | 			/* | 
 | 			 * Don't recover this entry if the checksum does not | 
 | 			 * match, but keep going and try to recover other | 
 | 			 * entries. | 
 | 			 */ | 
 | 			pr_debug("%s: ppl entry crc does not match: stored: 0x%x calculated: 0x%x\n", | 
 | 				 __func__, crc_stored, crc); | 
 | 			ppl_conf->mismatch_count++; | 
 | 		} else { | 
 | 			ret = ppl_recover_entry(log, e, ppl_sector); | 
 | 			if (ret) | 
 | 				goto out; | 
 | 			ppl_conf->recovered_entries++; | 
 | 		} | 
 |  | 
 | 		ppl_sector += ppl_entry_sectors; | 
 | 	} | 
 |  | 
 | 	/* flush the disk cache after recovery if necessary */ | 
 | 	ret = blkdev_issue_flush(rdev->bdev, GFP_KERNEL, NULL); | 
 | out: | 
 | 	__free_page(page); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ppl_write_empty_header(struct ppl_log *log) | 
 | { | 
 | 	struct page *page; | 
 | 	struct ppl_header *pplhdr; | 
 | 	struct md_rdev *rdev = log->rdev; | 
 | 	int ret = 0; | 
 |  | 
 | 	pr_debug("%s: disk: %d ppl_sector: %llu\n", __func__, | 
 | 		 rdev->raid_disk, (unsigned long long)rdev->ppl.sector); | 
 |  | 
 | 	page = alloc_page(GFP_NOIO | __GFP_ZERO); | 
 | 	if (!page) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	pplhdr = page_address(page); | 
 | 	/* zero out PPL space to avoid collision with old PPLs */ | 
 | 	blkdev_issue_zeroout(rdev->bdev, rdev->ppl.sector, | 
 | 			    log->rdev->ppl.size, GFP_NOIO, 0); | 
 | 	memset(pplhdr->reserved, 0xff, PPL_HDR_RESERVED); | 
 | 	pplhdr->signature = cpu_to_le32(log->ppl_conf->signature); | 
 | 	pplhdr->checksum = cpu_to_le32(~crc32c_le(~0, pplhdr, PAGE_SIZE)); | 
 |  | 
 | 	if (!sync_page_io(rdev, rdev->ppl.sector - rdev->data_offset, | 
 | 			  PPL_HEADER_SIZE, page, REQ_OP_WRITE | REQ_SYNC | | 
 | 			  REQ_FUA, 0, false)) { | 
 | 		md_error(rdev->mddev, rdev); | 
 | 		ret = -EIO; | 
 | 	} | 
 |  | 
 | 	__free_page(page); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ppl_load_distributed(struct ppl_log *log) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = log->ppl_conf; | 
 | 	struct md_rdev *rdev = log->rdev; | 
 | 	struct mddev *mddev = rdev->mddev; | 
 | 	struct page *page, *page2, *tmp; | 
 | 	struct ppl_header *pplhdr = NULL, *prev_pplhdr = NULL; | 
 | 	u32 crc, crc_stored; | 
 | 	u32 signature; | 
 | 	int ret = 0, i; | 
 | 	sector_t pplhdr_offset = 0, prev_pplhdr_offset = 0; | 
 |  | 
 | 	pr_debug("%s: disk: %d\n", __func__, rdev->raid_disk); | 
 | 	/* read PPL headers, find the recent one */ | 
 | 	page = alloc_page(GFP_KERNEL); | 
 | 	if (!page) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	page2 = alloc_page(GFP_KERNEL); | 
 | 	if (!page2) { | 
 | 		__free_page(page); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* searching ppl area for latest ppl */ | 
 | 	while (pplhdr_offset < rdev->ppl.size - (PPL_HEADER_SIZE >> 9)) { | 
 | 		if (!sync_page_io(rdev, | 
 | 				  rdev->ppl.sector - rdev->data_offset + | 
 | 				  pplhdr_offset, PAGE_SIZE, page, REQ_OP_READ, | 
 | 				  0, false)) { | 
 | 			md_error(mddev, rdev); | 
 | 			ret = -EIO; | 
 | 			/* if not able to read - don't recover any PPL */ | 
 | 			pplhdr = NULL; | 
 | 			break; | 
 | 		} | 
 | 		pplhdr = page_address(page); | 
 |  | 
 | 		/* check header validity */ | 
 | 		crc_stored = le32_to_cpu(pplhdr->checksum); | 
 | 		pplhdr->checksum = 0; | 
 | 		crc = ~crc32c_le(~0, pplhdr, PAGE_SIZE); | 
 |  | 
 | 		if (crc_stored != crc) { | 
 | 			pr_debug("%s: ppl header crc does not match: stored: 0x%x calculated: 0x%x (offset: %llu)\n", | 
 | 				 __func__, crc_stored, crc, | 
 | 				 (unsigned long long)pplhdr_offset); | 
 | 			pplhdr = prev_pplhdr; | 
 | 			pplhdr_offset = prev_pplhdr_offset; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		signature = le32_to_cpu(pplhdr->signature); | 
 |  | 
 | 		if (mddev->external) { | 
 | 			/* | 
 | 			 * For external metadata the header signature is set and | 
 | 			 * validated in userspace. | 
 | 			 */ | 
 | 			ppl_conf->signature = signature; | 
 | 		} else if (ppl_conf->signature != signature) { | 
 | 			pr_debug("%s: ppl header signature does not match: stored: 0x%x configured: 0x%x (offset: %llu)\n", | 
 | 				 __func__, signature, ppl_conf->signature, | 
 | 				 (unsigned long long)pplhdr_offset); | 
 | 			pplhdr = prev_pplhdr; | 
 | 			pplhdr_offset = prev_pplhdr_offset; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (prev_pplhdr && le64_to_cpu(prev_pplhdr->generation) > | 
 | 		    le64_to_cpu(pplhdr->generation)) { | 
 | 			/* previous was newest */ | 
 | 			pplhdr = prev_pplhdr; | 
 | 			pplhdr_offset = prev_pplhdr_offset; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		prev_pplhdr_offset = pplhdr_offset; | 
 | 		prev_pplhdr = pplhdr; | 
 |  | 
 | 		tmp = page; | 
 | 		page = page2; | 
 | 		page2 = tmp; | 
 |  | 
 | 		/* calculate next potential ppl offset */ | 
 | 		for (i = 0; i < le32_to_cpu(pplhdr->entries_count); i++) | 
 | 			pplhdr_offset += | 
 | 			    le32_to_cpu(pplhdr->entries[i].pp_size) >> 9; | 
 | 		pplhdr_offset += PPL_HEADER_SIZE >> 9; | 
 | 	} | 
 |  | 
 | 	/* no valid ppl found */ | 
 | 	if (!pplhdr) | 
 | 		ppl_conf->mismatch_count++; | 
 | 	else | 
 | 		pr_debug("%s: latest PPL found at offset: %llu, with generation: %llu\n", | 
 | 		    __func__, (unsigned long long)pplhdr_offset, | 
 | 		    le64_to_cpu(pplhdr->generation)); | 
 |  | 
 | 	/* attempt to recover from log if we are starting a dirty array */ | 
 | 	if (pplhdr && !mddev->pers && mddev->recovery_cp != MaxSector) | 
 | 		ret = ppl_recover(log, pplhdr, pplhdr_offset); | 
 |  | 
 | 	/* write empty header if we are starting the array */ | 
 | 	if (!ret && !mddev->pers) | 
 | 		ret = ppl_write_empty_header(log); | 
 |  | 
 | 	__free_page(page); | 
 | 	__free_page(page2); | 
 |  | 
 | 	pr_debug("%s: return: %d mismatch_count: %d recovered_entries: %d\n", | 
 | 		 __func__, ret, ppl_conf->mismatch_count, | 
 | 		 ppl_conf->recovered_entries); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ppl_load(struct ppl_conf *ppl_conf) | 
 | { | 
 | 	int ret = 0; | 
 | 	u32 signature = 0; | 
 | 	bool signature_set = false; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ppl_conf->count; i++) { | 
 | 		struct ppl_log *log = &ppl_conf->child_logs[i]; | 
 |  | 
 | 		/* skip missing drive */ | 
 | 		if (!log->rdev) | 
 | 			continue; | 
 |  | 
 | 		ret = ppl_load_distributed(log); | 
 | 		if (ret) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * For external metadata we can't check if the signature is | 
 | 		 * correct on a single drive, but we can check if it is the same | 
 | 		 * on all drives. | 
 | 		 */ | 
 | 		if (ppl_conf->mddev->external) { | 
 | 			if (!signature_set) { | 
 | 				signature = ppl_conf->signature; | 
 | 				signature_set = true; | 
 | 			} else if (signature != ppl_conf->signature) { | 
 | 				pr_warn("md/raid:%s: PPL header signature does not match on all member drives\n", | 
 | 					mdname(ppl_conf->mddev)); | 
 | 				ret = -EINVAL; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	pr_debug("%s: return: %d mismatch_count: %d recovered_entries: %d\n", | 
 | 		 __func__, ret, ppl_conf->mismatch_count, | 
 | 		 ppl_conf->recovered_entries); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __ppl_exit_log(struct ppl_conf *ppl_conf) | 
 | { | 
 | 	clear_bit(MD_HAS_PPL, &ppl_conf->mddev->flags); | 
 | 	clear_bit(MD_HAS_MULTIPLE_PPLS, &ppl_conf->mddev->flags); | 
 |  | 
 | 	kfree(ppl_conf->child_logs); | 
 |  | 
 | 	bioset_exit(&ppl_conf->bs); | 
 | 	bioset_exit(&ppl_conf->flush_bs); | 
 | 	mempool_exit(&ppl_conf->io_pool); | 
 | 	kmem_cache_destroy(ppl_conf->io_kc); | 
 |  | 
 | 	kfree(ppl_conf); | 
 | } | 
 |  | 
 | void ppl_exit_log(struct r5conf *conf) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = conf->log_private; | 
 |  | 
 | 	if (ppl_conf) { | 
 | 		__ppl_exit_log(ppl_conf); | 
 | 		conf->log_private = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int ppl_validate_rdev(struct md_rdev *rdev) | 
 | { | 
 | 	char b[BDEVNAME_SIZE]; | 
 | 	int ppl_data_sectors; | 
 | 	int ppl_size_new; | 
 |  | 
 | 	/* | 
 | 	 * The configured PPL size must be enough to store | 
 | 	 * the header and (at the very least) partial parity | 
 | 	 * for one stripe. Round it down to ensure the data | 
 | 	 * space is cleanly divisible by stripe size. | 
 | 	 */ | 
 | 	ppl_data_sectors = rdev->ppl.size - (PPL_HEADER_SIZE >> 9); | 
 |  | 
 | 	if (ppl_data_sectors > 0) | 
 | 		ppl_data_sectors = rounddown(ppl_data_sectors, STRIPE_SECTORS); | 
 |  | 
 | 	if (ppl_data_sectors <= 0) { | 
 | 		pr_warn("md/raid:%s: PPL space too small on %s\n", | 
 | 			mdname(rdev->mddev), bdevname(rdev->bdev, b)); | 
 | 		return -ENOSPC; | 
 | 	} | 
 |  | 
 | 	ppl_size_new = ppl_data_sectors + (PPL_HEADER_SIZE >> 9); | 
 |  | 
 | 	if ((rdev->ppl.sector < rdev->data_offset && | 
 | 	     rdev->ppl.sector + ppl_size_new > rdev->data_offset) || | 
 | 	    (rdev->ppl.sector >= rdev->data_offset && | 
 | 	     rdev->data_offset + rdev->sectors > rdev->ppl.sector)) { | 
 | 		pr_warn("md/raid:%s: PPL space overlaps with data on %s\n", | 
 | 			mdname(rdev->mddev), bdevname(rdev->bdev, b)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!rdev->mddev->external && | 
 | 	    ((rdev->ppl.offset > 0 && rdev->ppl.offset < (rdev->sb_size >> 9)) || | 
 | 	     (rdev->ppl.offset <= 0 && rdev->ppl.offset + ppl_size_new > 0))) { | 
 | 		pr_warn("md/raid:%s: PPL space overlaps with superblock on %s\n", | 
 | 			mdname(rdev->mddev), bdevname(rdev->bdev, b)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	rdev->ppl.size = ppl_size_new; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ppl_init_child_log(struct ppl_log *log, struct md_rdev *rdev) | 
 | { | 
 | 	struct request_queue *q; | 
 |  | 
 | 	if ((rdev->ppl.size << 9) >= (PPL_SPACE_SIZE + | 
 | 				      PPL_HEADER_SIZE) * 2) { | 
 | 		log->use_multippl = true; | 
 | 		set_bit(MD_HAS_MULTIPLE_PPLS, | 
 | 			&log->ppl_conf->mddev->flags); | 
 | 		log->entry_space = PPL_SPACE_SIZE; | 
 | 	} else { | 
 | 		log->use_multippl = false; | 
 | 		log->entry_space = (log->rdev->ppl.size << 9) - | 
 | 				   PPL_HEADER_SIZE; | 
 | 	} | 
 | 	log->next_io_sector = rdev->ppl.sector; | 
 |  | 
 | 	q = bdev_get_queue(rdev->bdev); | 
 | 	if (test_bit(QUEUE_FLAG_WC, &q->queue_flags)) | 
 | 		log->wb_cache_on = true; | 
 | } | 
 |  | 
 | int ppl_init_log(struct r5conf *conf) | 
 | { | 
 | 	struct ppl_conf *ppl_conf; | 
 | 	struct mddev *mddev = conf->mddev; | 
 | 	int ret = 0; | 
 | 	int max_disks; | 
 | 	int i; | 
 |  | 
 | 	pr_debug("md/raid:%s: enabling distributed Partial Parity Log\n", | 
 | 		 mdname(conf->mddev)); | 
 |  | 
 | 	if (PAGE_SIZE != 4096) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (mddev->level != 5) { | 
 | 		pr_warn("md/raid:%s PPL is not compatible with raid level %d\n", | 
 | 			mdname(mddev), mddev->level); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (mddev->bitmap_info.file || mddev->bitmap_info.offset) { | 
 | 		pr_warn("md/raid:%s PPL is not compatible with bitmap\n", | 
 | 			mdname(mddev)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) { | 
 | 		pr_warn("md/raid:%s PPL is not compatible with journal\n", | 
 | 			mdname(mddev)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	max_disks = FIELD_SIZEOF(struct ppl_log, disk_flush_bitmap) * | 
 | 		BITS_PER_BYTE; | 
 | 	if (conf->raid_disks > max_disks) { | 
 | 		pr_warn("md/raid:%s PPL doesn't support over %d disks in the array\n", | 
 | 			mdname(mddev), max_disks); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ppl_conf = kzalloc(sizeof(struct ppl_conf), GFP_KERNEL); | 
 | 	if (!ppl_conf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ppl_conf->mddev = mddev; | 
 |  | 
 | 	ppl_conf->io_kc = KMEM_CACHE(ppl_io_unit, 0); | 
 | 	if (!ppl_conf->io_kc) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ret = mempool_init(&ppl_conf->io_pool, conf->raid_disks, ppl_io_pool_alloc, | 
 | 			   ppl_io_pool_free, ppl_conf->io_kc); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	ret = bioset_init(&ppl_conf->bs, conf->raid_disks, 0, BIOSET_NEED_BVECS); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	ret = bioset_init(&ppl_conf->flush_bs, conf->raid_disks, 0, 0); | 
 | 	if (ret) | 
 | 		goto err; | 
 |  | 
 | 	ppl_conf->count = conf->raid_disks; | 
 | 	ppl_conf->child_logs = kcalloc(ppl_conf->count, sizeof(struct ppl_log), | 
 | 				       GFP_KERNEL); | 
 | 	if (!ppl_conf->child_logs) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	atomic64_set(&ppl_conf->seq, 0); | 
 | 	INIT_LIST_HEAD(&ppl_conf->no_mem_stripes); | 
 | 	spin_lock_init(&ppl_conf->no_mem_stripes_lock); | 
 |  | 
 | 	if (!mddev->external) { | 
 | 		ppl_conf->signature = ~crc32c_le(~0, mddev->uuid, sizeof(mddev->uuid)); | 
 | 		ppl_conf->block_size = 512; | 
 | 	} else { | 
 | 		ppl_conf->block_size = queue_logical_block_size(mddev->queue); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < ppl_conf->count; i++) { | 
 | 		struct ppl_log *log = &ppl_conf->child_logs[i]; | 
 | 		struct md_rdev *rdev = conf->disks[i].rdev; | 
 |  | 
 | 		mutex_init(&log->io_mutex); | 
 | 		spin_lock_init(&log->io_list_lock); | 
 | 		INIT_LIST_HEAD(&log->io_list); | 
 |  | 
 | 		log->ppl_conf = ppl_conf; | 
 | 		log->rdev = rdev; | 
 |  | 
 | 		if (rdev) { | 
 | 			ret = ppl_validate_rdev(rdev); | 
 | 			if (ret) | 
 | 				goto err; | 
 |  | 
 | 			ppl_init_child_log(log, rdev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* load and possibly recover the logs from the member disks */ | 
 | 	ret = ppl_load(ppl_conf); | 
 |  | 
 | 	if (ret) { | 
 | 		goto err; | 
 | 	} else if (!mddev->pers && mddev->recovery_cp == 0 && | 
 | 		   ppl_conf->recovered_entries > 0 && | 
 | 		   ppl_conf->mismatch_count == 0) { | 
 | 		/* | 
 | 		 * If we are starting a dirty array and the recovery succeeds | 
 | 		 * without any issues, set the array as clean. | 
 | 		 */ | 
 | 		mddev->recovery_cp = MaxSector; | 
 | 		set_bit(MD_SB_CHANGE_CLEAN, &mddev->sb_flags); | 
 | 	} else if (mddev->pers && ppl_conf->mismatch_count > 0) { | 
 | 		/* no mismatch allowed when enabling PPL for a running array */ | 
 | 		ret = -EINVAL; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	conf->log_private = ppl_conf; | 
 | 	set_bit(MD_HAS_PPL, &ppl_conf->mddev->flags); | 
 |  | 
 | 	return 0; | 
 | err: | 
 | 	__ppl_exit_log(ppl_conf); | 
 | 	return ret; | 
 | } | 
 |  | 
 | int ppl_modify_log(struct r5conf *conf, struct md_rdev *rdev, bool add) | 
 | { | 
 | 	struct ppl_conf *ppl_conf = conf->log_private; | 
 | 	struct ppl_log *log; | 
 | 	int ret = 0; | 
 | 	char b[BDEVNAME_SIZE]; | 
 |  | 
 | 	if (!rdev) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pr_debug("%s: disk: %d operation: %s dev: %s\n", | 
 | 		 __func__, rdev->raid_disk, add ? "add" : "remove", | 
 | 		 bdevname(rdev->bdev, b)); | 
 |  | 
 | 	if (rdev->raid_disk < 0) | 
 | 		return 0; | 
 |  | 
 | 	if (rdev->raid_disk >= ppl_conf->count) | 
 | 		return -ENODEV; | 
 |  | 
 | 	log = &ppl_conf->child_logs[rdev->raid_disk]; | 
 |  | 
 | 	mutex_lock(&log->io_mutex); | 
 | 	if (add) { | 
 | 		ret = ppl_validate_rdev(rdev); | 
 | 		if (!ret) { | 
 | 			log->rdev = rdev; | 
 | 			ret = ppl_write_empty_header(log); | 
 | 			ppl_init_child_log(log, rdev); | 
 | 		} | 
 | 	} else { | 
 | 		log->rdev = NULL; | 
 | 	} | 
 | 	mutex_unlock(&log->io_mutex); | 
 |  | 
 | 	return ret; | 
 | } |