| /* | 
 |  * Copyright (C) 2013 TangoTec Ltd. | 
 |  * Author: Baruch Siach <baruch@tkos.co.il> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * Driver for the Xtensa LX4 GPIO32 Option | 
 |  * | 
 |  * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22 | 
 |  * | 
 |  * GPIO32 is a standard optional extension to the Xtensa architecture core that | 
 |  * provides preconfigured output and input ports for intra SoC signaling. The | 
 |  * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) | 
 |  * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This | 
 |  * driver treats input and output states as two distinct devices. | 
 |  * | 
 |  * Access to GPIO32 specific instructions is controlled by the CPENABLE | 
 |  * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code | 
 |  * disables access to all coprocessors. This driver sets the CPENABLE bit | 
 |  * corresponding to GPIO32 before any GPIO32 specific instruction, and restores | 
 |  * CPENABLE state after that. | 
 |  * | 
 |  * This driver is currently incompatible with SMP. The GPIO32 extension is not | 
 |  * guaranteed to be available in all cores. Moreover, each core controls a | 
 |  * different set of IO wires. A theoretical SMP aware version of this driver | 
 |  * would need to have a per core workqueue to do the actual GPIO manipulation. | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/module.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #include <asm/coprocessor.h> /* CPENABLE read/write macros */ | 
 |  | 
 | #ifndef XCHAL_CP_ID_XTIOP | 
 | #error GPIO32 option is not enabled for your xtensa core variant | 
 | #endif | 
 |  | 
 | #if XCHAL_HAVE_CP | 
 |  | 
 | static inline unsigned long enable_cp(unsigned long *cpenable) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	RSR_CPENABLE(*cpenable); | 
 | 	WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP)); | 
 |  | 
 | 	return flags; | 
 | } | 
 |  | 
 | static inline void disable_cp(unsigned long flags, unsigned long cpenable) | 
 | { | 
 | 	WSR_CPENABLE(cpenable); | 
 | 	local_irq_restore(flags); | 
 | } | 
 |  | 
 | #else | 
 |  | 
 | static inline unsigned long enable_cp(unsigned long *cpenable) | 
 | { | 
 | 	*cpenable = 0; /* avoid uninitialized value warning */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void disable_cp(unsigned long flags, unsigned long cpenable) | 
 | { | 
 | } | 
 |  | 
 | #endif /* XCHAL_HAVE_CP */ | 
 |  | 
 | static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset) | 
 | { | 
 | 	return 1; /* input only */ | 
 | } | 
 |  | 
 | static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset) | 
 | { | 
 | 	unsigned long flags, saved_cpenable; | 
 | 	u32 impwire; | 
 |  | 
 | 	flags = enable_cp(&saved_cpenable); | 
 | 	__asm__ __volatile__("read_impwire %0" : "=a" (impwire)); | 
 | 	disable_cp(flags, saved_cpenable); | 
 |  | 
 | 	return !!(impwire & BIT(offset)); | 
 | } | 
 |  | 
 | static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset, | 
 | 				    int value) | 
 | { | 
 | 	BUG(); /* output only; should never be called */ | 
 | } | 
 |  | 
 | static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset) | 
 | { | 
 | 	return 0; /* output only */ | 
 | } | 
 |  | 
 | static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset) | 
 | { | 
 | 	unsigned long flags, saved_cpenable; | 
 | 	u32 expstate; | 
 |  | 
 | 	flags = enable_cp(&saved_cpenable); | 
 | 	__asm__ __volatile__("rur.expstate %0" : "=a" (expstate)); | 
 | 	disable_cp(flags, saved_cpenable); | 
 |  | 
 | 	return !!(expstate & BIT(offset)); | 
 | } | 
 |  | 
 | static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset, | 
 | 				     int value) | 
 | { | 
 | 	unsigned long flags, saved_cpenable; | 
 | 	u32 mask = BIT(offset); | 
 | 	u32 val = value ? BIT(offset) : 0; | 
 |  | 
 | 	flags = enable_cp(&saved_cpenable); | 
 | 	__asm__ __volatile__("wrmsk_expstate %0, %1" | 
 | 			     :: "a" (val), "a" (mask)); | 
 | 	disable_cp(flags, saved_cpenable); | 
 | } | 
 |  | 
 | static struct gpio_chip impwire_chip = { | 
 | 	.label		= "impwire", | 
 | 	.base		= -1, | 
 | 	.ngpio		= 32, | 
 | 	.get_direction	= xtensa_impwire_get_direction, | 
 | 	.get		= xtensa_impwire_get_value, | 
 | 	.set		= xtensa_impwire_set_value, | 
 | }; | 
 |  | 
 | static struct gpio_chip expstate_chip = { | 
 | 	.label		= "expstate", | 
 | 	.base		= -1, | 
 | 	.ngpio		= 32, | 
 | 	.get_direction	= xtensa_expstate_get_direction, | 
 | 	.get		= xtensa_expstate_get_value, | 
 | 	.set		= xtensa_expstate_set_value, | 
 | }; | 
 |  | 
 | static int xtensa_gpio_probe(struct platform_device *pdev) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = gpiochip_add_data(&impwire_chip, NULL); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	return gpiochip_add_data(&expstate_chip, NULL); | 
 | } | 
 |  | 
 | static struct platform_driver xtensa_gpio_driver = { | 
 | 	.driver		= { | 
 | 		.name		= "xtensa-gpio", | 
 | 	}, | 
 | 	.probe		= xtensa_gpio_probe, | 
 | }; | 
 |  | 
 | static int __init xtensa_gpio_init(void) | 
 | { | 
 | 	struct platform_device *pdev; | 
 |  | 
 | 	pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0); | 
 | 	if (IS_ERR(pdev)) | 
 | 		return PTR_ERR(pdev); | 
 |  | 
 | 	return platform_driver_register(&xtensa_gpio_driver); | 
 | } | 
 | device_initcall(xtensa_gpio_init); | 
 |  | 
 | MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); | 
 | MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver"); | 
 | MODULE_LICENSE("GPL"); |