|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * linux/fs/jbd2/revoke.c | 
|  | * | 
|  | * Written by Stephen C. Tweedie <sct@redhat.com>, 2000 | 
|  | * | 
|  | * Copyright 2000 Red Hat corp --- All Rights Reserved | 
|  | * | 
|  | * Journal revoke routines for the generic filesystem journaling code; | 
|  | * part of the ext2fs journaling system. | 
|  | * | 
|  | * Revoke is the mechanism used to prevent old log records for deleted | 
|  | * metadata from being replayed on top of newer data using the same | 
|  | * blocks.  The revoke mechanism is used in two separate places: | 
|  | * | 
|  | * + Commit: during commit we write the entire list of the current | 
|  | *   transaction's revoked blocks to the journal | 
|  | * | 
|  | * + Recovery: during recovery we record the transaction ID of all | 
|  | *   revoked blocks.  If there are multiple revoke records in the log | 
|  | *   for a single block, only the last one counts, and if there is a log | 
|  | *   entry for a block beyond the last revoke, then that log entry still | 
|  | *   gets replayed. | 
|  | * | 
|  | * We can get interactions between revokes and new log data within a | 
|  | * single transaction: | 
|  | * | 
|  | * Block is revoked and then journaled: | 
|  | *   The desired end result is the journaling of the new block, so we | 
|  | *   cancel the revoke before the transaction commits. | 
|  | * | 
|  | * Block is journaled and then revoked: | 
|  | *   The revoke must take precedence over the write of the block, so we | 
|  | *   need either to cancel the journal entry or to write the revoke | 
|  | *   later in the log than the log block.  In this case, we choose the | 
|  | *   latter: journaling a block cancels any revoke record for that block | 
|  | *   in the current transaction, so any revoke for that block in the | 
|  | *   transaction must have happened after the block was journaled and so | 
|  | *   the revoke must take precedence. | 
|  | * | 
|  | * Block is revoked and then written as data: | 
|  | *   The data write is allowed to succeed, but the revoke is _not_ | 
|  | *   cancelled.  We still need to prevent old log records from | 
|  | *   overwriting the new data.  We don't even need to clear the revoke | 
|  | *   bit here. | 
|  | * | 
|  | * We cache revoke status of a buffer in the current transaction in b_states | 
|  | * bits.  As the name says, revokevalid flag indicates that the cached revoke | 
|  | * status of a buffer is valid and we can rely on the cached status. | 
|  | * | 
|  | * Revoke information on buffers is a tri-state value: | 
|  | * | 
|  | * RevokeValid clear:	no cached revoke status, need to look it up | 
|  | * RevokeValid set, Revoked clear: | 
|  | *			buffer has not been revoked, and cancel_revoke | 
|  | *			need do nothing. | 
|  | * RevokeValid set, Revoked set: | 
|  | *			buffer has been revoked. | 
|  | * | 
|  | * Locking rules: | 
|  | * We keep two hash tables of revoke records. One hashtable belongs to the | 
|  | * running transaction (is pointed to by journal->j_revoke), the other one | 
|  | * belongs to the committing transaction. Accesses to the second hash table | 
|  | * happen only from the kjournald and no other thread touches this table.  Also | 
|  | * journal_switch_revoke_table() which switches which hashtable belongs to the | 
|  | * running and which to the committing transaction is called only from | 
|  | * kjournald. Therefore we need no locks when accessing the hashtable belonging | 
|  | * to the committing transaction. | 
|  | * | 
|  | * All users operating on the hash table belonging to the running transaction | 
|  | * have a handle to the transaction. Therefore they are safe from kjournald | 
|  | * switching hash tables under them. For operations on the lists of entries in | 
|  | * the hash table j_revoke_lock is used. | 
|  | * | 
|  | * Finally, also replay code uses the hash tables but at this moment no one else | 
|  | * can touch them (filesystem isn't mounted yet) and hence no locking is | 
|  | * needed. | 
|  | */ | 
|  |  | 
|  | #ifndef __KERNEL__ | 
|  | #include "jfs_user.h" | 
|  | #else | 
|  | #include <linux/time.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/jbd2.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/bio.h> | 
|  | #include <linux/log2.h> | 
|  | #include <linux/hash.h> | 
|  | #endif | 
|  |  | 
|  | static struct kmem_cache *jbd2_revoke_record_cache; | 
|  | static struct kmem_cache *jbd2_revoke_table_cache; | 
|  |  | 
|  | /* Each revoke record represents one single revoked block.  During | 
|  | journal replay, this involves recording the transaction ID of the | 
|  | last transaction to revoke this block. */ | 
|  |  | 
|  | struct jbd2_revoke_record_s | 
|  | { | 
|  | struct list_head  hash; | 
|  | tid_t		  sequence;	/* Used for recovery only */ | 
|  | unsigned long long	  blocknr; | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* The revoke table is just a simple hash table of revoke records. */ | 
|  | struct jbd2_revoke_table_s | 
|  | { | 
|  | /* It is conceivable that we might want a larger hash table | 
|  | * for recovery.  Must be a power of two. */ | 
|  | int		  hash_size; | 
|  | int		  hash_shift; | 
|  | struct list_head *hash_table; | 
|  | }; | 
|  |  | 
|  |  | 
|  | #ifdef __KERNEL__ | 
|  | static void write_one_revoke_record(transaction_t *, | 
|  | struct list_head *, | 
|  | struct buffer_head **, int *, | 
|  | struct jbd2_revoke_record_s *); | 
|  | static void flush_descriptor(journal_t *, struct buffer_head *, int); | 
|  | #endif | 
|  |  | 
|  | /* Utility functions to maintain the revoke table */ | 
|  |  | 
|  | static inline int hash(journal_t *journal, unsigned long long block) | 
|  | { | 
|  | return hash_64(block, journal->j_revoke->hash_shift); | 
|  | } | 
|  |  | 
|  | static int insert_revoke_hash(journal_t *journal, unsigned long long blocknr, | 
|  | tid_t seq) | 
|  | { | 
|  | struct list_head *hash_list; | 
|  | struct jbd2_revoke_record_s *record; | 
|  | gfp_t gfp_mask = GFP_NOFS; | 
|  |  | 
|  | if (journal_oom_retry) | 
|  | gfp_mask |= __GFP_NOFAIL; | 
|  | record = kmem_cache_alloc(jbd2_revoke_record_cache, gfp_mask); | 
|  | if (!record) | 
|  | return -ENOMEM; | 
|  |  | 
|  | record->sequence = seq; | 
|  | record->blocknr = blocknr; | 
|  | hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)]; | 
|  | spin_lock(&journal->j_revoke_lock); | 
|  | list_add(&record->hash, hash_list); | 
|  | spin_unlock(&journal->j_revoke_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Find a revoke record in the journal's hash table. */ | 
|  |  | 
|  | static struct jbd2_revoke_record_s *find_revoke_record(journal_t *journal, | 
|  | unsigned long long blocknr) | 
|  | { | 
|  | struct list_head *hash_list; | 
|  | struct jbd2_revoke_record_s *record; | 
|  |  | 
|  | hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)]; | 
|  |  | 
|  | spin_lock(&journal->j_revoke_lock); | 
|  | record = (struct jbd2_revoke_record_s *) hash_list->next; | 
|  | while (&(record->hash) != hash_list) { | 
|  | if (record->blocknr == blocknr) { | 
|  | spin_unlock(&journal->j_revoke_lock); | 
|  | return record; | 
|  | } | 
|  | record = (struct jbd2_revoke_record_s *) record->hash.next; | 
|  | } | 
|  | spin_unlock(&journal->j_revoke_lock); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void jbd2_journal_destroy_revoke_record_cache(void) | 
|  | { | 
|  | kmem_cache_destroy(jbd2_revoke_record_cache); | 
|  | jbd2_revoke_record_cache = NULL; | 
|  | } | 
|  |  | 
|  | void jbd2_journal_destroy_revoke_table_cache(void) | 
|  | { | 
|  | kmem_cache_destroy(jbd2_revoke_table_cache); | 
|  | jbd2_revoke_table_cache = NULL; | 
|  | } | 
|  |  | 
|  | int __init jbd2_journal_init_revoke_record_cache(void) | 
|  | { | 
|  | J_ASSERT(!jbd2_revoke_record_cache); | 
|  | jbd2_revoke_record_cache = KMEM_CACHE(jbd2_revoke_record_s, | 
|  | SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY); | 
|  |  | 
|  | if (!jbd2_revoke_record_cache) { | 
|  | pr_emerg("JBD2: failed to create revoke_record cache\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int __init jbd2_journal_init_revoke_table_cache(void) | 
|  | { | 
|  | J_ASSERT(!jbd2_revoke_table_cache); | 
|  | jbd2_revoke_table_cache = KMEM_CACHE(jbd2_revoke_table_s, | 
|  | SLAB_TEMPORARY); | 
|  | if (!jbd2_revoke_table_cache) { | 
|  | pr_emerg("JBD2: failed to create revoke_table cache\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size) | 
|  | { | 
|  | int shift = 0; | 
|  | int tmp = hash_size; | 
|  | struct jbd2_revoke_table_s *table; | 
|  |  | 
|  | table = kmem_cache_alloc(jbd2_revoke_table_cache, GFP_KERNEL); | 
|  | if (!table) | 
|  | goto out; | 
|  |  | 
|  | while((tmp >>= 1UL) != 0UL) | 
|  | shift++; | 
|  |  | 
|  | table->hash_size = hash_size; | 
|  | table->hash_shift = shift; | 
|  | table->hash_table = | 
|  | kmalloc_array(hash_size, sizeof(struct list_head), GFP_KERNEL); | 
|  | if (!table->hash_table) { | 
|  | kmem_cache_free(jbd2_revoke_table_cache, table); | 
|  | table = NULL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (tmp = 0; tmp < hash_size; tmp++) | 
|  | INIT_LIST_HEAD(&table->hash_table[tmp]); | 
|  |  | 
|  | out: | 
|  | return table; | 
|  | } | 
|  |  | 
|  | static void jbd2_journal_destroy_revoke_table(struct jbd2_revoke_table_s *table) | 
|  | { | 
|  | int i; | 
|  | struct list_head *hash_list; | 
|  |  | 
|  | for (i = 0; i < table->hash_size; i++) { | 
|  | hash_list = &table->hash_table[i]; | 
|  | J_ASSERT(list_empty(hash_list)); | 
|  | } | 
|  |  | 
|  | kfree(table->hash_table); | 
|  | kmem_cache_free(jbd2_revoke_table_cache, table); | 
|  | } | 
|  |  | 
|  | /* Initialise the revoke table for a given journal to a given size. */ | 
|  | int jbd2_journal_init_revoke(journal_t *journal, int hash_size) | 
|  | { | 
|  | J_ASSERT(journal->j_revoke_table[0] == NULL); | 
|  | J_ASSERT(is_power_of_2(hash_size)); | 
|  |  | 
|  | journal->j_revoke_table[0] = jbd2_journal_init_revoke_table(hash_size); | 
|  | if (!journal->j_revoke_table[0]) | 
|  | goto fail0; | 
|  |  | 
|  | journal->j_revoke_table[1] = jbd2_journal_init_revoke_table(hash_size); | 
|  | if (!journal->j_revoke_table[1]) | 
|  | goto fail1; | 
|  |  | 
|  | journal->j_revoke = journal->j_revoke_table[1]; | 
|  |  | 
|  | spin_lock_init(&journal->j_revoke_lock); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail1: | 
|  | jbd2_journal_destroy_revoke_table(journal->j_revoke_table[0]); | 
|  | journal->j_revoke_table[0] = NULL; | 
|  | fail0: | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Destroy a journal's revoke table.  The table must already be empty! */ | 
|  | void jbd2_journal_destroy_revoke(journal_t *journal) | 
|  | { | 
|  | journal->j_revoke = NULL; | 
|  | if (journal->j_revoke_table[0]) | 
|  | jbd2_journal_destroy_revoke_table(journal->j_revoke_table[0]); | 
|  | if (journal->j_revoke_table[1]) | 
|  | jbd2_journal_destroy_revoke_table(journal->j_revoke_table[1]); | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef __KERNEL__ | 
|  |  | 
|  | /* | 
|  | * jbd2_journal_revoke: revoke a given buffer_head from the journal.  This | 
|  | * prevents the block from being replayed during recovery if we take a | 
|  | * crash after this current transaction commits.  Any subsequent | 
|  | * metadata writes of the buffer in this transaction cancel the | 
|  | * revoke. | 
|  | * | 
|  | * Note that this call may block --- it is up to the caller to make | 
|  | * sure that there are no further calls to journal_write_metadata | 
|  | * before the revoke is complete.  In ext3, this implies calling the | 
|  | * revoke before clearing the block bitmap when we are deleting | 
|  | * metadata. | 
|  | * | 
|  | * Revoke performs a jbd2_journal_forget on any buffer_head passed in as a | 
|  | * parameter, but does _not_ forget the buffer_head if the bh was only | 
|  | * found implicitly. | 
|  | * | 
|  | * bh_in may not be a journalled buffer - it may have come off | 
|  | * the hash tables without an attached journal_head. | 
|  | * | 
|  | * If bh_in is non-zero, jbd2_journal_revoke() will decrement its b_count | 
|  | * by one. | 
|  | */ | 
|  |  | 
|  | int jbd2_journal_revoke(handle_t *handle, unsigned long long blocknr, | 
|  | struct buffer_head *bh_in) | 
|  | { | 
|  | struct buffer_head *bh = NULL; | 
|  | journal_t *journal; | 
|  | struct block_device *bdev; | 
|  | int err; | 
|  |  | 
|  | might_sleep(); | 
|  | if (bh_in) | 
|  | BUFFER_TRACE(bh_in, "enter"); | 
|  |  | 
|  | journal = handle->h_transaction->t_journal; | 
|  | if (!jbd2_journal_set_features(journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE)){ | 
|  | J_ASSERT (!"Cannot set revoke feature!"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bdev = journal->j_fs_dev; | 
|  | bh = bh_in; | 
|  |  | 
|  | if (!bh) { | 
|  | bh = __find_get_block(bdev, blocknr, journal->j_blocksize); | 
|  | if (bh) | 
|  | BUFFER_TRACE(bh, "found on hash"); | 
|  | } | 
|  | #ifdef JBD2_EXPENSIVE_CHECKING | 
|  | else { | 
|  | struct buffer_head *bh2; | 
|  |  | 
|  | /* If there is a different buffer_head lying around in | 
|  | * memory anywhere... */ | 
|  | bh2 = __find_get_block(bdev, blocknr, journal->j_blocksize); | 
|  | if (bh2) { | 
|  | /* ... and it has RevokeValid status... */ | 
|  | if (bh2 != bh && buffer_revokevalid(bh2)) | 
|  | /* ...then it better be revoked too, | 
|  | * since it's illegal to create a revoke | 
|  | * record against a buffer_head which is | 
|  | * not marked revoked --- that would | 
|  | * risk missing a subsequent revoke | 
|  | * cancel. */ | 
|  | J_ASSERT_BH(bh2, buffer_revoked(bh2)); | 
|  | put_bh(bh2); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* We really ought not ever to revoke twice in a row without | 
|  | first having the revoke cancelled: it's illegal to free a | 
|  | block twice without allocating it in between! */ | 
|  | if (bh) { | 
|  | if (!J_EXPECT_BH(bh, !buffer_revoked(bh), | 
|  | "inconsistent data on disk")) { | 
|  | if (!bh_in) | 
|  | brelse(bh); | 
|  | return -EIO; | 
|  | } | 
|  | set_buffer_revoked(bh); | 
|  | set_buffer_revokevalid(bh); | 
|  | if (bh_in) { | 
|  | BUFFER_TRACE(bh_in, "call jbd2_journal_forget"); | 
|  | jbd2_journal_forget(handle, bh_in); | 
|  | } else { | 
|  | BUFFER_TRACE(bh, "call brelse"); | 
|  | __brelse(bh); | 
|  | } | 
|  | } | 
|  |  | 
|  | jbd_debug(2, "insert revoke for block %llu, bh_in=%p\n",blocknr, bh_in); | 
|  | err = insert_revoke_hash(journal, blocknr, | 
|  | handle->h_transaction->t_tid); | 
|  | BUFFER_TRACE(bh_in, "exit"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Cancel an outstanding revoke.  For use only internally by the | 
|  | * journaling code (called from jbd2_journal_get_write_access). | 
|  | * | 
|  | * We trust buffer_revoked() on the buffer if the buffer is already | 
|  | * being journaled: if there is no revoke pending on the buffer, then we | 
|  | * don't do anything here. | 
|  | * | 
|  | * This would break if it were possible for a buffer to be revoked and | 
|  | * discarded, and then reallocated within the same transaction.  In such | 
|  | * a case we would have lost the revoked bit, but when we arrived here | 
|  | * the second time we would still have a pending revoke to cancel.  So, | 
|  | * do not trust the Revoked bit on buffers unless RevokeValid is also | 
|  | * set. | 
|  | */ | 
|  | int jbd2_journal_cancel_revoke(handle_t *handle, struct journal_head *jh) | 
|  | { | 
|  | struct jbd2_revoke_record_s *record; | 
|  | journal_t *journal = handle->h_transaction->t_journal; | 
|  | int need_cancel; | 
|  | int did_revoke = 0;	/* akpm: debug */ | 
|  | struct buffer_head *bh = jh2bh(jh); | 
|  |  | 
|  | jbd_debug(4, "journal_head %p, cancelling revoke\n", jh); | 
|  |  | 
|  | /* Is the existing Revoke bit valid?  If so, we trust it, and | 
|  | * only perform the full cancel if the revoke bit is set.  If | 
|  | * not, we can't trust the revoke bit, and we need to do the | 
|  | * full search for a revoke record. */ | 
|  | if (test_set_buffer_revokevalid(bh)) { | 
|  | need_cancel = test_clear_buffer_revoked(bh); | 
|  | } else { | 
|  | need_cancel = 1; | 
|  | clear_buffer_revoked(bh); | 
|  | } | 
|  |  | 
|  | if (need_cancel) { | 
|  | record = find_revoke_record(journal, bh->b_blocknr); | 
|  | if (record) { | 
|  | jbd_debug(4, "cancelled existing revoke on " | 
|  | "blocknr %llu\n", (unsigned long long)bh->b_blocknr); | 
|  | spin_lock(&journal->j_revoke_lock); | 
|  | list_del(&record->hash); | 
|  | spin_unlock(&journal->j_revoke_lock); | 
|  | kmem_cache_free(jbd2_revoke_record_cache, record); | 
|  | did_revoke = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef JBD2_EXPENSIVE_CHECKING | 
|  | /* There better not be one left behind by now! */ | 
|  | record = find_revoke_record(journal, bh->b_blocknr); | 
|  | J_ASSERT_JH(jh, record == NULL); | 
|  | #endif | 
|  |  | 
|  | /* Finally, have we just cleared revoke on an unhashed | 
|  | * buffer_head?  If so, we'd better make sure we clear the | 
|  | * revoked status on any hashed alias too, otherwise the revoke | 
|  | * state machine will get very upset later on. */ | 
|  | if (need_cancel) { | 
|  | struct buffer_head *bh2; | 
|  | bh2 = __find_get_block(bh->b_bdev, bh->b_blocknr, bh->b_size); | 
|  | if (bh2) { | 
|  | if (bh2 != bh) | 
|  | clear_buffer_revoked(bh2); | 
|  | __brelse(bh2); | 
|  | } | 
|  | } | 
|  | return did_revoke; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * journal_clear_revoked_flag clears revoked flag of buffers in | 
|  | * revoke table to reflect there is no revoked buffers in the next | 
|  | * transaction which is going to be started. | 
|  | */ | 
|  | void jbd2_clear_buffer_revoked_flags(journal_t *journal) | 
|  | { | 
|  | struct jbd2_revoke_table_s *revoke = journal->j_revoke; | 
|  | int i = 0; | 
|  |  | 
|  | for (i = 0; i < revoke->hash_size; i++) { | 
|  | struct list_head *hash_list; | 
|  | struct list_head *list_entry; | 
|  | hash_list = &revoke->hash_table[i]; | 
|  |  | 
|  | list_for_each(list_entry, hash_list) { | 
|  | struct jbd2_revoke_record_s *record; | 
|  | struct buffer_head *bh; | 
|  | record = (struct jbd2_revoke_record_s *)list_entry; | 
|  | bh = __find_get_block(journal->j_fs_dev, | 
|  | record->blocknr, | 
|  | journal->j_blocksize); | 
|  | if (bh) { | 
|  | clear_buffer_revoked(bh); | 
|  | __brelse(bh); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* journal_switch_revoke table select j_revoke for next transaction | 
|  | * we do not want to suspend any processing until all revokes are | 
|  | * written -bzzz | 
|  | */ | 
|  | void jbd2_journal_switch_revoke_table(journal_t *journal) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (journal->j_revoke == journal->j_revoke_table[0]) | 
|  | journal->j_revoke = journal->j_revoke_table[1]; | 
|  | else | 
|  | journal->j_revoke = journal->j_revoke_table[0]; | 
|  |  | 
|  | for (i = 0; i < journal->j_revoke->hash_size; i++) | 
|  | INIT_LIST_HEAD(&journal->j_revoke->hash_table[i]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write revoke records to the journal for all entries in the current | 
|  | * revoke hash, deleting the entries as we go. | 
|  | */ | 
|  | void jbd2_journal_write_revoke_records(transaction_t *transaction, | 
|  | struct list_head *log_bufs) | 
|  | { | 
|  | journal_t *journal = transaction->t_journal; | 
|  | struct buffer_head *descriptor; | 
|  | struct jbd2_revoke_record_s *record; | 
|  | struct jbd2_revoke_table_s *revoke; | 
|  | struct list_head *hash_list; | 
|  | int i, offset, count; | 
|  |  | 
|  | descriptor = NULL; | 
|  | offset = 0; | 
|  | count = 0; | 
|  |  | 
|  | /* select revoke table for committing transaction */ | 
|  | revoke = journal->j_revoke == journal->j_revoke_table[0] ? | 
|  | journal->j_revoke_table[1] : journal->j_revoke_table[0]; | 
|  |  | 
|  | for (i = 0; i < revoke->hash_size; i++) { | 
|  | hash_list = &revoke->hash_table[i]; | 
|  |  | 
|  | while (!list_empty(hash_list)) { | 
|  | record = (struct jbd2_revoke_record_s *) | 
|  | hash_list->next; | 
|  | write_one_revoke_record(transaction, log_bufs, | 
|  | &descriptor, &offset, record); | 
|  | count++; | 
|  | list_del(&record->hash); | 
|  | kmem_cache_free(jbd2_revoke_record_cache, record); | 
|  | } | 
|  | } | 
|  | if (descriptor) | 
|  | flush_descriptor(journal, descriptor, offset); | 
|  | jbd_debug(1, "Wrote %d revoke records\n", count); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write out one revoke record.  We need to create a new descriptor | 
|  | * block if the old one is full or if we have not already created one. | 
|  | */ | 
|  |  | 
|  | static void write_one_revoke_record(transaction_t *transaction, | 
|  | struct list_head *log_bufs, | 
|  | struct buffer_head **descriptorp, | 
|  | int *offsetp, | 
|  | struct jbd2_revoke_record_s *record) | 
|  | { | 
|  | journal_t *journal = transaction->t_journal; | 
|  | int csum_size = 0; | 
|  | struct buffer_head *descriptor; | 
|  | int sz, offset; | 
|  |  | 
|  | /* If we are already aborting, this all becomes a noop.  We | 
|  | still need to go round the loop in | 
|  | jbd2_journal_write_revoke_records in order to free all of the | 
|  | revoke records: only the IO to the journal is omitted. */ | 
|  | if (is_journal_aborted(journal)) | 
|  | return; | 
|  |  | 
|  | descriptor = *descriptorp; | 
|  | offset = *offsetp; | 
|  |  | 
|  | /* Do we need to leave space at the end for a checksum? */ | 
|  | if (jbd2_journal_has_csum_v2or3(journal)) | 
|  | csum_size = sizeof(struct jbd2_journal_block_tail); | 
|  |  | 
|  | if (jbd2_has_feature_64bit(journal)) | 
|  | sz = 8; | 
|  | else | 
|  | sz = 4; | 
|  |  | 
|  | /* Make sure we have a descriptor with space left for the record */ | 
|  | if (descriptor) { | 
|  | if (offset + sz > journal->j_blocksize - csum_size) { | 
|  | flush_descriptor(journal, descriptor, offset); | 
|  | descriptor = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!descriptor) { | 
|  | descriptor = jbd2_journal_get_descriptor_buffer(transaction, | 
|  | JBD2_REVOKE_BLOCK); | 
|  | if (!descriptor) | 
|  | return; | 
|  |  | 
|  | /* Record it so that we can wait for IO completion later */ | 
|  | BUFFER_TRACE(descriptor, "file in log_bufs"); | 
|  | jbd2_file_log_bh(log_bufs, descriptor); | 
|  |  | 
|  | offset = sizeof(jbd2_journal_revoke_header_t); | 
|  | *descriptorp = descriptor; | 
|  | } | 
|  |  | 
|  | if (jbd2_has_feature_64bit(journal)) | 
|  | * ((__be64 *)(&descriptor->b_data[offset])) = | 
|  | cpu_to_be64(record->blocknr); | 
|  | else | 
|  | * ((__be32 *)(&descriptor->b_data[offset])) = | 
|  | cpu_to_be32(record->blocknr); | 
|  | offset += sz; | 
|  |  | 
|  | *offsetp = offset; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Flush a revoke descriptor out to the journal.  If we are aborting, | 
|  | * this is a noop; otherwise we are generating a buffer which needs to | 
|  | * be waited for during commit, so it has to go onto the appropriate | 
|  | * journal buffer list. | 
|  | */ | 
|  |  | 
|  | static void flush_descriptor(journal_t *journal, | 
|  | struct buffer_head *descriptor, | 
|  | int offset) | 
|  | { | 
|  | jbd2_journal_revoke_header_t *header; | 
|  |  | 
|  | if (is_journal_aborted(journal)) { | 
|  | put_bh(descriptor); | 
|  | return; | 
|  | } | 
|  |  | 
|  | header = (jbd2_journal_revoke_header_t *)descriptor->b_data; | 
|  | header->r_count = cpu_to_be32(offset); | 
|  | jbd2_descriptor_block_csum_set(journal, descriptor); | 
|  |  | 
|  | set_buffer_jwrite(descriptor); | 
|  | BUFFER_TRACE(descriptor, "write"); | 
|  | set_buffer_dirty(descriptor); | 
|  | write_dirty_buffer(descriptor, REQ_SYNC); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Revoke support for recovery. | 
|  | * | 
|  | * Recovery needs to be able to: | 
|  | * | 
|  | *  record all revoke records, including the tid of the latest instance | 
|  | *  of each revoke in the journal | 
|  | * | 
|  | *  check whether a given block in a given transaction should be replayed | 
|  | *  (ie. has not been revoked by a revoke record in that or a subsequent | 
|  | *  transaction) | 
|  | * | 
|  | *  empty the revoke table after recovery. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * First, setting revoke records.  We create a new revoke record for | 
|  | * every block ever revoked in the log as we scan it for recovery, and | 
|  | * we update the existing records if we find multiple revokes for a | 
|  | * single block. | 
|  | */ | 
|  |  | 
|  | int jbd2_journal_set_revoke(journal_t *journal, | 
|  | unsigned long long blocknr, | 
|  | tid_t sequence) | 
|  | { | 
|  | struct jbd2_revoke_record_s *record; | 
|  |  | 
|  | record = find_revoke_record(journal, blocknr); | 
|  | if (record) { | 
|  | /* If we have multiple occurrences, only record the | 
|  | * latest sequence number in the hashed record */ | 
|  | if (tid_gt(sequence, record->sequence)) | 
|  | record->sequence = sequence; | 
|  | return 0; | 
|  | } | 
|  | return insert_revoke_hash(journal, blocknr, sequence); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test revoke records.  For a given block referenced in the log, has | 
|  | * that block been revoked?  A revoke record with a given transaction | 
|  | * sequence number revokes all blocks in that transaction and earlier | 
|  | * ones, but later transactions still need replayed. | 
|  | */ | 
|  |  | 
|  | int jbd2_journal_test_revoke(journal_t *journal, | 
|  | unsigned long long blocknr, | 
|  | tid_t sequence) | 
|  | { | 
|  | struct jbd2_revoke_record_s *record; | 
|  |  | 
|  | record = find_revoke_record(journal, blocknr); | 
|  | if (!record) | 
|  | return 0; | 
|  | if (tid_gt(sequence, record->sequence)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Finally, once recovery is over, we need to clear the revoke table so | 
|  | * that it can be reused by the running filesystem. | 
|  | */ | 
|  |  | 
|  | void jbd2_journal_clear_revoke(journal_t *journal) | 
|  | { | 
|  | int i; | 
|  | struct list_head *hash_list; | 
|  | struct jbd2_revoke_record_s *record; | 
|  | struct jbd2_revoke_table_s *revoke; | 
|  |  | 
|  | revoke = journal->j_revoke; | 
|  |  | 
|  | for (i = 0; i < revoke->hash_size; i++) { | 
|  | hash_list = &revoke->hash_table[i]; | 
|  | while (!list_empty(hash_list)) { | 
|  | record = (struct jbd2_revoke_record_s*) hash_list->next; | 
|  | list_del(&record->hash); | 
|  | kmem_cache_free(jbd2_revoke_record_cache, record); | 
|  | } | 
|  | } | 
|  | } |