|  | # | 
|  | # ARM CPU Frequency scaling drivers | 
|  | # | 
|  |  | 
|  | config ACPI_CPPC_CPUFREQ | 
|  | tristate "CPUFreq driver based on the ACPI CPPC spec" | 
|  | depends on ACPI_PROCESSOR | 
|  | select ACPI_CPPC_LIB | 
|  | help | 
|  | This adds a CPUFreq driver which uses CPPC methods | 
|  | as described in the ACPIv5.1 spec. CPPC stands for | 
|  | Collaborative Processor Performance Controls. It | 
|  | is based on an abstract continuous scale of CPU | 
|  | performance values which allows the remote power | 
|  | processor to flexibly optimize for power and | 
|  | performance. CPPC relies on power management firmware | 
|  | support for its operation. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_ARMADA_37XX_CPUFREQ | 
|  | tristate "Armada 37xx CPUFreq support" | 
|  | depends on ARCH_MVEBU && CPUFREQ_DT | 
|  | help | 
|  | This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. | 
|  | The Armada 37xx PMU supports 4 frequency and VDD levels. | 
|  |  | 
|  | # big LITTLE core layer and glue drivers | 
|  | config ARM_BIG_LITTLE_CPUFREQ | 
|  | tristate "Generic ARM big LITTLE CPUfreq driver" | 
|  | depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK | 
|  | # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y | 
|  | depends on !CPU_THERMAL || THERMAL | 
|  | select PM_OPP | 
|  | help | 
|  | This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. | 
|  |  | 
|  | config ARM_DT_BL_CPUFREQ | 
|  | tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" | 
|  | depends on ARM_BIG_LITTLE_CPUFREQ && OF | 
|  | help | 
|  | This enables probing via DT for Generic CPUfreq driver for ARM | 
|  | big.LITTLE platform. This gets frequency tables from DT. | 
|  |  | 
|  | config ARM_SCPI_CPUFREQ | 
|  | tristate "SCPI based CPUfreq driver" | 
|  | depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI | 
|  | depends on !CPU_THERMAL || THERMAL | 
|  | help | 
|  | This adds the CPUfreq driver support for ARM platforms using SCPI | 
|  | protocol for CPU power management. | 
|  |  | 
|  | This driver uses SCPI Message Protocol driver to interact with the | 
|  | firmware providing the CPU DVFS functionality. | 
|  |  | 
|  | config ARM_VEXPRESS_SPC_CPUFREQ | 
|  | tristate "Versatile Express SPC based CPUfreq driver" | 
|  | depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC | 
|  | help | 
|  | This add the CPUfreq driver support for Versatile Express | 
|  | big.LITTLE platforms using SPC for power management. | 
|  |  | 
|  | config ARM_BRCMSTB_AVS_CPUFREQ | 
|  | tristate "Broadcom STB AVS CPUfreq driver" | 
|  | depends on ARCH_BRCMSTB || COMPILE_TEST | 
|  | default y | 
|  | help | 
|  | Some Broadcom STB SoCs use a co-processor running proprietary firmware | 
|  | ("AVS") to handle voltage and frequency scaling. This driver provides | 
|  | a standard CPUfreq interface to to the firmware. | 
|  |  | 
|  | Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS. | 
|  |  | 
|  | config ARM_HIGHBANK_CPUFREQ | 
|  | tristate "Calxeda Highbank-based" | 
|  | depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR | 
|  | default m | 
|  | help | 
|  | This adds the CPUFreq driver for Calxeda Highbank SoC | 
|  | based boards. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_IMX6Q_CPUFREQ | 
|  | tristate "Freescale i.MX6 cpufreq support" | 
|  | depends on ARCH_MXC | 
|  | depends on REGULATOR_ANATOP | 
|  | select PM_OPP | 
|  | help | 
|  | This adds cpufreq driver support for Freescale i.MX6 series SoCs. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_KIRKWOOD_CPUFREQ | 
|  | def_bool MACH_KIRKWOOD | 
|  | help | 
|  | This adds the CPUFreq driver for Marvell Kirkwood | 
|  | SoCs. | 
|  |  | 
|  | config ARM_MEDIATEK_CPUFREQ | 
|  | tristate "CPU Frequency scaling support for MediaTek SoCs" | 
|  | depends on ARCH_MEDIATEK && REGULATOR | 
|  | depends on !CPU_THERMAL || THERMAL | 
|  | select PM_OPP | 
|  | help | 
|  | This adds the CPUFreq driver support for MediaTek SoCs. | 
|  |  | 
|  | config ARM_MEDIATEK_MCUPM_CPUFREQ | 
|  | tristate "Mediatek MCUPM CPUFreq support" | 
|  | depends on ARCH_MEDIATEK | 
|  | depends on MTK_TINYSYS_MCUPM_SUPPORT | 
|  | select PM_OPP | 
|  | help | 
|  | This adds the CPUFreq driver support for Mediatek MCUPM-based SoCs. | 
|  | Some chipsets interact with a microprocessor for the firmware to | 
|  | scale frequency. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_MEDIATEK_MT6880_CPUFREQ | 
|  | tristate "Mediatek MT6880 CPUFreq support" | 
|  | depends on ARCH_MEDIATEK && REGULATOR | 
|  | select PM_OPP | 
|  | help | 
|  | This adds the CPUFreq driver support for Mediatek MT6880 Series SoC. | 
|  | This driver require dt-based operating-points-v2 tables with | 
|  | voltage and frequency. | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_SSPM_CPUFREQ | 
|  | tristate "Mediatek SSPM CPUFreq support" | 
|  | depends on ARCH_MEDIATEK | 
|  | select PM_OPP | 
|  | help | 
|  | This adds the CPUFreq driver support for Mediatek MT67xx Series SoC. | 
|  | This driver require dt-based operating-points-v2 tables with | 
|  | voltage and frequency. | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_OMAP2PLUS_CPUFREQ | 
|  | bool "TI OMAP2+" | 
|  | depends on ARCH_OMAP2PLUS | 
|  | default ARCH_OMAP2PLUS | 
|  |  | 
|  | config ARM_QCOM_CPUFREQ_KRYO | 
|  | tristate "Qualcomm Kryo based CPUFreq" | 
|  | depends on ARM64 | 
|  | depends on QCOM_QFPROM | 
|  | depends on QCOM_SMEM | 
|  | select PM_OPP | 
|  | help | 
|  | This adds the CPUFreq driver for Qualcomm Kryo SoC based boards. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_S3C_CPUFREQ | 
|  | bool | 
|  | help | 
|  | Internal configuration node for common cpufreq on Samsung SoC | 
|  |  | 
|  | config ARM_S3C24XX_CPUFREQ | 
|  | bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" | 
|  | depends on ARCH_S3C24XX | 
|  | select ARM_S3C_CPUFREQ | 
|  | help | 
|  | This enables the CPUfreq driver for the Samsung S3C24XX family | 
|  | of CPUs. | 
|  |  | 
|  | For details, take a look at <file:Documentation/cpu-freq>. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_S3C24XX_CPUFREQ_DEBUG | 
|  | bool "Debug CPUfreq Samsung driver core" | 
|  | depends on ARM_S3C24XX_CPUFREQ | 
|  | help | 
|  | Enable s3c_freq_dbg for the Samsung S3C CPUfreq core | 
|  |  | 
|  | config ARM_S3C24XX_CPUFREQ_IODEBUG | 
|  | bool "Debug CPUfreq Samsung driver IO timing" | 
|  | depends on ARM_S3C24XX_CPUFREQ | 
|  | help | 
|  | Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core | 
|  |  | 
|  | config ARM_S3C24XX_CPUFREQ_DEBUGFS | 
|  | bool "Export debugfs for CPUFreq" | 
|  | depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS | 
|  | help | 
|  | Export status information via debugfs. | 
|  |  | 
|  | config ARM_S3C2410_CPUFREQ | 
|  | bool | 
|  | depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 | 
|  | select S3C2410_CPUFREQ_UTILS | 
|  | help | 
|  | CPU Frequency scaling support for S3C2410 | 
|  |  | 
|  | config ARM_S3C2412_CPUFREQ | 
|  | bool | 
|  | depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 | 
|  | default y | 
|  | select S3C2412_IOTIMING | 
|  | help | 
|  | CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. | 
|  |  | 
|  | config ARM_S3C2416_CPUFREQ | 
|  | bool "S3C2416 CPU Frequency scaling support" | 
|  | depends on CPU_S3C2416 | 
|  | help | 
|  | This adds the CPUFreq driver for the Samsung S3C2416 and | 
|  | S3C2450 SoC. The S3C2416 supports changing the rate of the | 
|  | armdiv clock source and also entering a so called dynamic | 
|  | voltage scaling mode in which it is possible to reduce the | 
|  | core voltage of the CPU. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_S3C2416_CPUFREQ_VCORESCALE | 
|  | bool "Allow voltage scaling for S3C2416 arm core" | 
|  | depends on ARM_S3C2416_CPUFREQ && REGULATOR | 
|  | help | 
|  | Enable CPU voltage scaling when entering the dvs mode. | 
|  | It uses information gathered through existing hardware and | 
|  | tests but not documented in any datasheet. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_S3C2440_CPUFREQ | 
|  | bool "S3C2440/S3C2442 CPU Frequency scaling support" | 
|  | depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) | 
|  | select S3C2410_CPUFREQ_UTILS | 
|  | default y | 
|  | help | 
|  | CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. | 
|  |  | 
|  | config ARM_S3C64XX_CPUFREQ | 
|  | bool "Samsung S3C64XX" | 
|  | depends on CPU_S3C6410 | 
|  | default y | 
|  | help | 
|  | This adds the CPUFreq driver for Samsung S3C6410 SoC. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_S5PV210_CPUFREQ | 
|  | bool "Samsung S5PV210 and S5PC110" | 
|  | depends on CPU_S5PV210 | 
|  | default y | 
|  | help | 
|  | This adds the CPUFreq driver for Samsung S5PV210 and | 
|  | S5PC110 SoCs. | 
|  |  | 
|  | If in doubt, say N. | 
|  |  | 
|  | config ARM_SA1100_CPUFREQ | 
|  | bool | 
|  |  | 
|  | config ARM_SA1110_CPUFREQ | 
|  | bool | 
|  |  | 
|  | config ARM_SCMI_CPUFREQ | 
|  | tristate "SCMI based CPUfreq driver" | 
|  | depends on ARM_SCMI_PROTOCOL || COMPILE_TEST | 
|  | depends on !CPU_THERMAL || THERMAL | 
|  | select PM_OPP | 
|  | help | 
|  | This adds the CPUfreq driver support for ARM platforms using SCMI | 
|  | protocol for CPU power management. | 
|  |  | 
|  | This driver uses SCMI Message Protocol driver to interact with the | 
|  | firmware providing the CPU DVFS functionality. | 
|  |  | 
|  | config ARM_SPEAR_CPUFREQ | 
|  | bool "SPEAr CPUFreq support" | 
|  | depends on PLAT_SPEAR | 
|  | default y | 
|  | help | 
|  | This adds the CPUFreq driver support for SPEAr SOCs. | 
|  |  | 
|  | config ARM_STI_CPUFREQ | 
|  | tristate "STi CPUFreq support" | 
|  | depends on SOC_STIH407 | 
|  | help | 
|  | This driver uses the generic OPP framework to match the running | 
|  | platform with a predefined set of suitable values.  If not provided | 
|  | we will fall-back so safe-values contained in Device Tree.  Enable | 
|  | this config option if you wish to add CPUFreq support for STi based | 
|  | SoCs. | 
|  |  | 
|  | config ARM_TANGO_CPUFREQ | 
|  | bool | 
|  | depends on CPUFREQ_DT && ARCH_TANGO | 
|  | default y | 
|  |  | 
|  | config ARM_TEGRA20_CPUFREQ | 
|  | tristate "Tegra20 CPUFreq support" | 
|  | depends on ARCH_TEGRA | 
|  | default y | 
|  | help | 
|  | This adds the CPUFreq driver support for Tegra20 SOCs. | 
|  |  | 
|  | config ARM_TEGRA124_CPUFREQ | 
|  | tristate "Tegra124 CPUFreq support" | 
|  | depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR | 
|  | default y | 
|  | help | 
|  | This adds the CPUFreq driver support for Tegra124 SOCs. | 
|  |  | 
|  | config ARM_TEGRA186_CPUFREQ | 
|  | tristate "Tegra186 CPUFreq support" | 
|  | depends on ARCH_TEGRA && TEGRA_BPMP | 
|  | help | 
|  | This adds the CPUFreq driver support for Tegra186 SOCs. | 
|  |  | 
|  | config ARM_TI_CPUFREQ | 
|  | bool "Texas Instruments CPUFreq support" | 
|  | depends on ARCH_OMAP2PLUS | 
|  | help | 
|  | This driver enables valid OPPs on the running platform based on | 
|  | values contained within the SoC in use. Enable this in order to | 
|  | use the cpufreq-dt driver on all Texas Instruments platforms that | 
|  | provide dt based operating-points-v2 tables with opp-supported-hw | 
|  | data provided. Required for cpufreq support on AM335x, AM437x, | 
|  | DRA7x, and AM57x platforms. | 
|  |  | 
|  | config ARM_PXA2xx_CPUFREQ | 
|  | tristate "Intel PXA2xx CPUfreq driver" | 
|  | depends on PXA27x || PXA25x | 
|  | help | 
|  | This add the CPUFreq driver support for Intel PXA2xx SOCs. | 
|  |  | 
|  | If in doubt, say N. |