|  | /* | 
|  | * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ | 
|  | *	Keerthy <j-keerthy@ti.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed "as is" WITHOUT ANY WARRANTY of any | 
|  | * kind, whether expressed or implied; without even the implied warranty | 
|  | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License version 2 for more details. | 
|  | * | 
|  | * Based on the LP873X driver | 
|  | */ | 
|  |  | 
|  | #include <linux/gpio/driver.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  |  | 
|  | #include <linux/mfd/lp87565.h> | 
|  |  | 
|  | struct lp87565_gpio { | 
|  | struct gpio_chip chip; | 
|  | struct regmap *map; | 
|  | }; | 
|  |  | 
|  | static int lp87565_gpio_get(struct gpio_chip *chip, unsigned int offset) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(chip); | 
|  | int ret, val; | 
|  |  | 
|  | ret = regmap_read(gpio->map, LP87565_REG_GPIO_IN, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return !!(val & BIT(offset)); | 
|  | } | 
|  |  | 
|  | static void lp87565_gpio_set(struct gpio_chip *chip, unsigned int offset, | 
|  | int value) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(chip); | 
|  |  | 
|  | regmap_update_bits(gpio->map, LP87565_REG_GPIO_OUT, | 
|  | BIT(offset), value ? BIT(offset) : 0); | 
|  | } | 
|  |  | 
|  | static int lp87565_gpio_get_direction(struct gpio_chip *chip, | 
|  | unsigned int offset) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(chip); | 
|  | int ret, val; | 
|  |  | 
|  | ret = regmap_read(gpio->map, LP87565_REG_GPIO_CONFIG, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return !(val & BIT(offset)); | 
|  | } | 
|  |  | 
|  | static int lp87565_gpio_direction_input(struct gpio_chip *chip, | 
|  | unsigned int offset) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(chip); | 
|  |  | 
|  | return regmap_update_bits(gpio->map, | 
|  | LP87565_REG_GPIO_CONFIG, | 
|  | BIT(offset), 0); | 
|  | } | 
|  |  | 
|  | static int lp87565_gpio_direction_output(struct gpio_chip *chip, | 
|  | unsigned int offset, int value) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(chip); | 
|  |  | 
|  | lp87565_gpio_set(chip, offset, value); | 
|  |  | 
|  | return regmap_update_bits(gpio->map, | 
|  | LP87565_REG_GPIO_CONFIG, | 
|  | BIT(offset), BIT(offset)); | 
|  | } | 
|  |  | 
|  | static int lp87565_gpio_request(struct gpio_chip *gc, unsigned int offset) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(gc); | 
|  | int ret; | 
|  |  | 
|  | switch (offset) { | 
|  | case 0: | 
|  | case 1: | 
|  | case 2: | 
|  | /* | 
|  | * MUX can program the pin to be in EN1/2/3 pin mode | 
|  | * Or GPIO1/2/3 mode. | 
|  | * Setup the GPIO*_SEL MUX to GPIO mode | 
|  | */ | 
|  | ret = regmap_update_bits(gpio->map, | 
|  | LP87565_REG_PIN_FUNCTION, | 
|  | BIT(offset), BIT(offset)); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp87565_gpio_set_config(struct gpio_chip *gc, unsigned int offset, | 
|  | unsigned long config) | 
|  | { | 
|  | struct lp87565_gpio *gpio = gpiochip_get_data(gc); | 
|  |  | 
|  | switch (pinconf_to_config_param(config)) { | 
|  | case PIN_CONFIG_DRIVE_OPEN_DRAIN: | 
|  | return regmap_update_bits(gpio->map, | 
|  | LP87565_REG_GPIO_CONFIG, | 
|  | BIT(offset + | 
|  | __ffs(LP87565_GOIO1_OD)), | 
|  | BIT(offset + | 
|  | __ffs(LP87565_GOIO1_OD))); | 
|  | case PIN_CONFIG_DRIVE_PUSH_PULL: | 
|  | return regmap_update_bits(gpio->map, | 
|  | LP87565_REG_GPIO_CONFIG, | 
|  | BIT(offset + | 
|  | __ffs(LP87565_GOIO1_OD)), 0); | 
|  | default: | 
|  | return -ENOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct gpio_chip template_chip = { | 
|  | .label			= "lp87565-gpio", | 
|  | .owner			= THIS_MODULE, | 
|  | .request		= lp87565_gpio_request, | 
|  | .get_direction		= lp87565_gpio_get_direction, | 
|  | .direction_input	= lp87565_gpio_direction_input, | 
|  | .direction_output	= lp87565_gpio_direction_output, | 
|  | .get			= lp87565_gpio_get, | 
|  | .set			= lp87565_gpio_set, | 
|  | .set_config		= lp87565_gpio_set_config, | 
|  | .base			= -1, | 
|  | .ngpio			= 3, | 
|  | .can_sleep		= true, | 
|  | }; | 
|  |  | 
|  | static int lp87565_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct lp87565_gpio *gpio; | 
|  | struct lp87565 *lp87565; | 
|  | int ret; | 
|  |  | 
|  | gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); | 
|  | if (!gpio) | 
|  | return -ENOMEM; | 
|  |  | 
|  | lp87565 = dev_get_drvdata(pdev->dev.parent); | 
|  | gpio->chip = template_chip; | 
|  | gpio->chip.parent = lp87565->dev; | 
|  | gpio->map = lp87565->regmap; | 
|  |  | 
|  | ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct platform_device_id lp87565_gpio_id_table[] = { | 
|  | { "lp87565-q1-gpio", }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(platform, lp87565_gpio_id_table); | 
|  |  | 
|  | static struct platform_driver lp87565_gpio_driver = { | 
|  | .driver = { | 
|  | .name = "lp87565-gpio", | 
|  | }, | 
|  | .probe = lp87565_gpio_probe, | 
|  | .id_table = lp87565_gpio_id_table, | 
|  | }; | 
|  | module_platform_driver(lp87565_gpio_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>"); | 
|  | MODULE_DESCRIPTION("LP87565 GPIO driver"); | 
|  | MODULE_LICENSE("GPL v2"); |