|  | /* | 
|  | * TSC2005 touchscreen driver | 
|  | * | 
|  | * Copyright (C) 2006-2010 Nokia Corporation | 
|  | * Copyright (C) 2015 QWERTY Embedded Design | 
|  | * Copyright (C) 2015 EMAC Inc. | 
|  | * | 
|  | * Based on original tsc2005.c by Lauri Leukkunen <lauri.leukkunen@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/input.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/regmap.h> | 
|  | #include "tsc200x-core.h" | 
|  |  | 
|  | static const struct input_id tsc2005_input_id = { | 
|  | .bustype = BUS_SPI, | 
|  | .product = 2005, | 
|  | }; | 
|  |  | 
|  | static int tsc2005_cmd(struct device *dev, u8 cmd) | 
|  | { | 
|  | u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd; | 
|  | struct spi_transfer xfer = { | 
|  | .tx_buf         = &tx, | 
|  | .len            = 1, | 
|  | .bits_per_word  = 8, | 
|  | }; | 
|  | struct spi_message msg; | 
|  | struct spi_device *spi = to_spi_device(dev); | 
|  | int error; | 
|  |  | 
|  | spi_message_init(&msg); | 
|  | spi_message_add_tail(&xfer, &msg); | 
|  |  | 
|  | error = spi_sync(spi, &msg); | 
|  | if (error) { | 
|  | dev_err(dev, "%s: failed, command: %x, spi error: %d\n", | 
|  | __func__, cmd, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tsc2005_probe(struct spi_device *spi) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | spi->mode = SPI_MODE_0; | 
|  | spi->bits_per_word = 8; | 
|  | if (!spi->max_speed_hz) | 
|  | spi->max_speed_hz = TSC2005_SPI_MAX_SPEED_HZ; | 
|  |  | 
|  | error = spi_setup(spi); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | return tsc200x_probe(&spi->dev, spi->irq, &tsc2005_input_id, | 
|  | devm_regmap_init_spi(spi, &tsc200x_regmap_config), | 
|  | tsc2005_cmd); | 
|  | } | 
|  |  | 
|  | static int tsc2005_remove(struct spi_device *spi) | 
|  | { | 
|  | return tsc200x_remove(&spi->dev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id tsc2005_of_match[] = { | 
|  | { .compatible = "ti,tsc2005" }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, tsc2005_of_match); | 
|  | #endif | 
|  |  | 
|  | static struct spi_driver tsc2005_driver = { | 
|  | .driver	= { | 
|  | .name	= "tsc2005", | 
|  | .of_match_table = of_match_ptr(tsc2005_of_match), | 
|  | .pm	= &tsc200x_pm_ops, | 
|  | }, | 
|  | .probe	= tsc2005_probe, | 
|  | .remove	= tsc2005_remove, | 
|  | }; | 
|  | module_spi_driver(tsc2005_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>"); | 
|  | MODULE_DESCRIPTION("TSC2005 Touchscreen Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("spi:tsc2005"); |