|  | /* | 
|  | * Net1080 based USB host-to-host cables | 
|  | * Copyright (C) 2000-2005 by David Brownell | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  | // #define	DEBUG			// error path messages, extra info | 
|  | // #define	VERBOSE			// more; success messages | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/usbnet.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Netchip 1080 driver ... http://www.netchip.com | 
|  | * (Sept 2004:  End-of-life announcement has been sent.) | 
|  | * Used in (some) LapLink cables | 
|  | */ | 
|  |  | 
|  | #define frame_errors	data[1] | 
|  |  | 
|  | /* | 
|  | * NetChip framing of ethernet packets, supporting additional error | 
|  | * checks for links that may drop bulk packets from inside messages. | 
|  | * Odd USB length == always short read for last usb packet. | 
|  | *	- nc_header | 
|  | *	- Ethernet header (14 bytes) | 
|  | *	- payload | 
|  | *	- (optional padding byte, if needed so length becomes odd) | 
|  | *	- nc_trailer | 
|  | * | 
|  | * This framing is to be avoided for non-NetChip devices. | 
|  | */ | 
|  |  | 
|  | struct nc_header {		// packed: | 
|  | __le16	hdr_len;		// sizeof nc_header (LE, all) | 
|  | __le16	packet_len;		// payload size (including ethhdr) | 
|  | __le16	packet_id;		// detects dropped packets | 
|  | #define MIN_HEADER	6 | 
|  |  | 
|  | // all else is optional, and must start with: | 
|  | // __le16	vendorId;	// from usb-if | 
|  | // __le16	productId; | 
|  | } __packed; | 
|  |  | 
|  | #define	PAD_BYTE	((unsigned char)0xAC) | 
|  |  | 
|  | struct nc_trailer { | 
|  | __le16	packet_id; | 
|  | } __packed; | 
|  |  | 
|  | // packets may use FLAG_FRAMING_NC and optional pad | 
|  | #define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \ | 
|  | + sizeof (struct ethhdr) \ | 
|  | + (mtu) \ | 
|  | + 1 \ | 
|  | + sizeof (struct nc_trailer)) | 
|  |  | 
|  | #define MIN_FRAMED	FRAMED_SIZE(0) | 
|  |  | 
|  | /* packets _could_ be up to 64KB... */ | 
|  | #define NC_MAX_PACKET	32767 | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Zero means no timeout; else, how long a 64 byte bulk packet may be queued | 
|  | * before the hardware drops it.  If that's done, the driver will need to | 
|  | * frame network packets to guard against the dropped USB packets.  The win32 | 
|  | * driver sets this for both sides of the link. | 
|  | */ | 
|  | #define	NC_READ_TTL_MS	((u8)255)	// ms | 
|  |  | 
|  | /* | 
|  | * We ignore most registers and EEPROM contents. | 
|  | */ | 
|  | #define	REG_USBCTL	((u8)0x04) | 
|  | #define REG_TTL		((u8)0x10) | 
|  | #define REG_STATUS	((u8)0x11) | 
|  |  | 
|  | /* | 
|  | * Vendor specific requests to read/write data | 
|  | */ | 
|  | #define	REQUEST_REGISTER	((u8)0x10) | 
|  | #define	REQUEST_EEPROM		((u8)0x11) | 
|  |  | 
|  | static int | 
|  | nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr) | 
|  | { | 
|  | int status = usbnet_read_cmd(dev, req, | 
|  | USB_DIR_IN | USB_TYPE_VENDOR | | 
|  | USB_RECIP_DEVICE, | 
|  | 0, regnum, retval_ptr, | 
|  | sizeof *retval_ptr); | 
|  | if (status > 0) | 
|  | status = 0; | 
|  | if (!status) | 
|  | le16_to_cpus(retval_ptr); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr) | 
|  | { | 
|  | return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr); | 
|  | } | 
|  |  | 
|  | // no retval ... can become async, usable in_interrupt() | 
|  | static void | 
|  | nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value) | 
|  | { | 
|  | usbnet_write_cmd(dev, req, | 
|  | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | 
|  | value, regnum, NULL, 0); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | nc_register_write(struct usbnet *dev, u8 regnum, u16 value) | 
|  | { | 
|  | nc_vendor_write(dev, REQUEST_REGISTER, regnum, value); | 
|  | } | 
|  |  | 
|  |  | 
|  | #if 0 | 
|  | static void nc_dump_registers(struct usbnet *dev) | 
|  | { | 
|  | u8	reg; | 
|  | u16	*vp = kmalloc(sizeof (u16)); | 
|  |  | 
|  | if (!vp) | 
|  | return; | 
|  |  | 
|  | netdev_dbg(dev->net, "registers:\n"); | 
|  | for (reg = 0; reg < 0x20; reg++) { | 
|  | int retval; | 
|  |  | 
|  | // reading some registers is trouble | 
|  | if (reg >= 0x08 && reg <= 0xf) | 
|  | continue; | 
|  | if (reg >= 0x12 && reg <= 0x1e) | 
|  | continue; | 
|  |  | 
|  | retval = nc_register_read(dev, reg, vp); | 
|  | if (retval < 0) | 
|  | netdev_dbg(dev->net, "reg [0x%x] ==> error %d\n", | 
|  | reg, retval); | 
|  | else | 
|  | netdev_dbg(dev->net, "reg [0x%x] = 0x%x\n", reg, *vp); | 
|  | } | 
|  | kfree(vp); | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* | 
|  | * Control register | 
|  | */ | 
|  |  | 
|  | #define	USBCTL_WRITABLE_MASK	0x1f0f | 
|  | // bits 15-13 reserved, r/o | 
|  | #define	USBCTL_ENABLE_LANG	(1 << 12) | 
|  | #define	USBCTL_ENABLE_MFGR	(1 << 11) | 
|  | #define	USBCTL_ENABLE_PROD	(1 << 10) | 
|  | #define	USBCTL_ENABLE_SERIAL	(1 << 9) | 
|  | #define	USBCTL_ENABLE_DEFAULTS	(1 << 8) | 
|  | // bits 7-4 reserved, r/o | 
|  | #define	USBCTL_FLUSH_OTHER	(1 << 3) | 
|  | #define	USBCTL_FLUSH_THIS	(1 << 2) | 
|  | #define	USBCTL_DISCONN_OTHER	(1 << 1) | 
|  | #define	USBCTL_DISCONN_THIS	(1 << 0) | 
|  |  | 
|  | static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl) | 
|  | { | 
|  | netif_dbg(dev, link, dev->net, | 
|  | "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n", | 
|  | dev->udev->bus->bus_name, dev->udev->devpath, | 
|  | usbctl, | 
|  | (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "", | 
|  | (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "", | 
|  | (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "", | 
|  | (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "", | 
|  | (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "", | 
|  |  | 
|  | (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "", | 
|  | (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "", | 
|  |  | 
|  | (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "", | 
|  | (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "", | 
|  |  | 
|  | usbctl & ~USBCTL_WRITABLE_MASK); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* | 
|  | * Status register | 
|  | */ | 
|  |  | 
|  | #define	STATUS_PORT_A		(1 << 15) | 
|  |  | 
|  | #define	STATUS_CONN_OTHER	(1 << 14) | 
|  | #define	STATUS_SUSPEND_OTHER	(1 << 13) | 
|  | #define	STATUS_MAILBOX_OTHER	(1 << 12) | 
|  | #define	STATUS_PACKETS_OTHER(n)	(((n) >> 8) & 0x03) | 
|  |  | 
|  | #define	STATUS_CONN_THIS	(1 << 6) | 
|  | #define	STATUS_SUSPEND_THIS	(1 << 5) | 
|  | #define	STATUS_MAILBOX_THIS	(1 << 4) | 
|  | #define	STATUS_PACKETS_THIS(n)	(((n) >> 0) & 0x03) | 
|  |  | 
|  | #define	STATUS_UNSPEC_MASK	0x0c8c | 
|  | #define	STATUS_NOISE_MASK 	((u16)~(0x0303|STATUS_UNSPEC_MASK)) | 
|  |  | 
|  |  | 
|  | static inline void nc_dump_status(struct usbnet *dev, u16 status) | 
|  | { | 
|  | netif_dbg(dev, link, dev->net, | 
|  | "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n", | 
|  | dev->udev->bus->bus_name, dev->udev->devpath, | 
|  | status, | 
|  |  | 
|  | // XXX the packet counts don't seem right | 
|  | // (1 at reset, not 0); maybe UNSPEC too | 
|  |  | 
|  | (status & STATUS_PORT_A) ? 'A' : 'B', | 
|  | STATUS_PACKETS_THIS(status), | 
|  | (status & STATUS_CONN_THIS) ? " CON" : "", | 
|  | (status & STATUS_SUSPEND_THIS) ? " SUS" : "", | 
|  | (status & STATUS_MAILBOX_THIS) ? " MBOX" : "", | 
|  |  | 
|  | STATUS_PACKETS_OTHER(status), | 
|  | (status & STATUS_CONN_OTHER) ? " CON" : "", | 
|  | (status & STATUS_SUSPEND_OTHER) ? " SUS" : "", | 
|  | (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "", | 
|  |  | 
|  | status & STATUS_UNSPEC_MASK); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* | 
|  | * TTL register | 
|  | */ | 
|  |  | 
|  | #define	TTL_OTHER(ttl)	(0x00ff & (ttl >> 8)) | 
|  | #define MK_TTL(this,other)	((u16)(((other)<<8)|(0x00ff&(this)))) | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | static int net1080_reset(struct usbnet *dev) | 
|  | { | 
|  | u16		usbctl, status, ttl; | 
|  | u16		vp; | 
|  | int		retval; | 
|  |  | 
|  | // nc_dump_registers(dev); | 
|  |  | 
|  | if ((retval = nc_register_read(dev, REG_STATUS, &vp)) < 0) { | 
|  | netdev_dbg(dev->net, "can't read %s-%s status: %d\n", | 
|  | dev->udev->bus->bus_name, dev->udev->devpath, retval); | 
|  | goto done; | 
|  | } | 
|  | status = vp; | 
|  | nc_dump_status(dev, status); | 
|  |  | 
|  | if ((retval = nc_register_read(dev, REG_USBCTL, &vp)) < 0) { | 
|  | netdev_dbg(dev->net, "can't read USBCTL, %d\n", retval); | 
|  | goto done; | 
|  | } | 
|  | usbctl = vp; | 
|  | nc_dump_usbctl(dev, usbctl); | 
|  |  | 
|  | nc_register_write(dev, REG_USBCTL, | 
|  | USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER); | 
|  |  | 
|  | if ((retval = nc_register_read(dev, REG_TTL, &vp)) < 0) { | 
|  | netdev_dbg(dev->net, "can't read TTL, %d\n", retval); | 
|  | goto done; | 
|  | } | 
|  | ttl = vp; | 
|  |  | 
|  | nc_register_write(dev, REG_TTL, | 
|  | MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) ); | 
|  | netdev_dbg(dev->net, "assigned TTL, %d ms\n", NC_READ_TTL_MS); | 
|  |  | 
|  | netif_info(dev, link, dev->net, "port %c, peer %sconnected\n", | 
|  | (status & STATUS_PORT_A) ? 'A' : 'B', | 
|  | (status & STATUS_CONN_OTHER) ? "" : "dis"); | 
|  | retval = 0; | 
|  |  | 
|  | done: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int net1080_check_connect(struct usbnet *dev) | 
|  | { | 
|  | int			retval; | 
|  | u16			status; | 
|  | u16			vp; | 
|  |  | 
|  | retval = nc_register_read(dev, REG_STATUS, &vp); | 
|  | status = vp; | 
|  | if (retval != 0) { | 
|  | netdev_dbg(dev->net, "net1080_check_conn read - %d\n", retval); | 
|  | return retval; | 
|  | } | 
|  | if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER) | 
|  | return -ENOLINK; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void nc_ensure_sync(struct usbnet *dev) | 
|  | { | 
|  | if (++dev->frame_errors <= 5) | 
|  | return; | 
|  |  | 
|  | if (usbnet_write_cmd_async(dev, REQUEST_REGISTER, | 
|  | USB_DIR_OUT | USB_TYPE_VENDOR | | 
|  | USB_RECIP_DEVICE, | 
|  | USBCTL_FLUSH_THIS | | 
|  | USBCTL_FLUSH_OTHER, | 
|  | REG_USBCTL, NULL, 0)) | 
|  | return; | 
|  |  | 
|  | netif_dbg(dev, rx_err, dev->net, | 
|  | "flush net1080; too many framing errors\n"); | 
|  | dev->frame_errors = 0; | 
|  | } | 
|  |  | 
|  | static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct nc_header	*header; | 
|  | struct nc_trailer	*trailer; | 
|  | u16			hdr_len, packet_len; | 
|  |  | 
|  | /* This check is no longer done by usbnet */ | 
|  | if (skb->len < dev->net->hard_header_len) | 
|  | return 0; | 
|  |  | 
|  | if (!(skb->len & 0x01)) { | 
|  | netdev_dbg(dev->net, "rx framesize %d range %d..%d mtu %d\n", | 
|  | skb->len, dev->net->hard_header_len, dev->hard_mtu, | 
|  | dev->net->mtu); | 
|  | dev->net->stats.rx_frame_errors++; | 
|  | nc_ensure_sync(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | header = (struct nc_header *) skb->data; | 
|  | hdr_len = le16_to_cpup(&header->hdr_len); | 
|  | packet_len = le16_to_cpup(&header->packet_len); | 
|  | if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) { | 
|  | dev->net->stats.rx_frame_errors++; | 
|  | netdev_dbg(dev->net, "packet too big, %d\n", packet_len); | 
|  | nc_ensure_sync(dev); | 
|  | return 0; | 
|  | } else if (hdr_len < MIN_HEADER) { | 
|  | dev->net->stats.rx_frame_errors++; | 
|  | netdev_dbg(dev->net, "header too short, %d\n", hdr_len); | 
|  | nc_ensure_sync(dev); | 
|  | return 0; | 
|  | } else if (hdr_len > MIN_HEADER) { | 
|  | // out of band data for us? | 
|  | netdev_dbg(dev->net, "header OOB, %d bytes\n", hdr_len - MIN_HEADER); | 
|  | nc_ensure_sync(dev); | 
|  | // switch (vendor/product ids) { ... } | 
|  | } | 
|  | skb_pull(skb, hdr_len); | 
|  |  | 
|  | trailer = (struct nc_trailer *) | 
|  | (skb->data + skb->len - sizeof *trailer); | 
|  | skb_trim(skb, skb->len - sizeof *trailer); | 
|  |  | 
|  | if ((packet_len & 0x01) == 0) { | 
|  | if (skb->data [packet_len] != PAD_BYTE) { | 
|  | dev->net->stats.rx_frame_errors++; | 
|  | netdev_dbg(dev->net, "bad pad\n"); | 
|  | return 0; | 
|  | } | 
|  | skb_trim(skb, skb->len - 1); | 
|  | } | 
|  | if (skb->len != packet_len) { | 
|  | dev->net->stats.rx_frame_errors++; | 
|  | netdev_dbg(dev->net, "bad packet len %d (expected %d)\n", | 
|  | skb->len, packet_len); | 
|  | nc_ensure_sync(dev); | 
|  | return 0; | 
|  | } | 
|  | if (header->packet_id != get_unaligned(&trailer->packet_id)) { | 
|  | dev->net->stats.rx_fifo_errors++; | 
|  | netdev_dbg(dev->net, "(2+ dropped) rx packet_id mismatch 0x%x 0x%x\n", | 
|  | le16_to_cpu(header->packet_id), | 
|  | le16_to_cpu(trailer->packet_id)); | 
|  | return 0; | 
|  | } | 
|  | #if 0 | 
|  | netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len, | 
|  | header->packet_len, header->packet_id); | 
|  | #endif | 
|  | dev->frame_errors = 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static struct sk_buff * | 
|  | net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) | 
|  | { | 
|  | struct sk_buff		*skb2; | 
|  | struct nc_header	*header = NULL; | 
|  | struct nc_trailer	*trailer = NULL; | 
|  | int			padlen = sizeof (struct nc_trailer); | 
|  | int			len = skb->len; | 
|  |  | 
|  | if (!((len + padlen + sizeof (struct nc_header)) & 0x01)) | 
|  | padlen++; | 
|  | if (!skb_cloned(skb)) { | 
|  | int	headroom = skb_headroom(skb); | 
|  | int	tailroom = skb_tailroom(skb); | 
|  |  | 
|  | if (padlen <= tailroom && | 
|  | sizeof(struct nc_header) <= headroom) | 
|  | /* There's enough head and tail room */ | 
|  | goto encapsulate; | 
|  |  | 
|  | if ((sizeof (struct nc_header) + padlen) < | 
|  | (headroom + tailroom)) { | 
|  | /* There's enough total room, so just readjust */ | 
|  | skb->data = memmove(skb->head | 
|  | + sizeof (struct nc_header), | 
|  | skb->data, skb->len); | 
|  | skb_set_tail_pointer(skb, len); | 
|  | goto encapsulate; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Create a new skb to use with the correct size */ | 
|  | skb2 = skb_copy_expand(skb, | 
|  | sizeof (struct nc_header), | 
|  | padlen, | 
|  | flags); | 
|  | dev_kfree_skb_any(skb); | 
|  | if (!skb2) | 
|  | return skb2; | 
|  | skb = skb2; | 
|  |  | 
|  | encapsulate: | 
|  | /* header first */ | 
|  | header = skb_push(skb, sizeof *header); | 
|  | header->hdr_len = cpu_to_le16(sizeof (*header)); | 
|  | header->packet_len = cpu_to_le16(len); | 
|  | header->packet_id = cpu_to_le16((u16)dev->xid++); | 
|  |  | 
|  | /* maybe pad; then trailer */ | 
|  | if (!((skb->len + sizeof *trailer) & 0x01)) | 
|  | skb_put_u8(skb, PAD_BYTE); | 
|  | trailer = skb_put(skb, sizeof *trailer); | 
|  | put_unaligned(header->packet_id, &trailer->packet_id); | 
|  | #if 0 | 
|  | netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n", | 
|  | header->hdr_len, header->packet_len, | 
|  | header->packet_id); | 
|  | #endif | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static int net1080_bind(struct usbnet *dev, struct usb_interface *intf) | 
|  | { | 
|  | unsigned	extra = sizeof (struct nc_header) | 
|  | + 1 | 
|  | + sizeof (struct nc_trailer); | 
|  |  | 
|  | dev->net->hard_header_len += extra; | 
|  | dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; | 
|  | dev->hard_mtu = NC_MAX_PACKET; | 
|  | return usbnet_get_endpoints (dev, intf); | 
|  | } | 
|  |  | 
|  | static const struct driver_info	net1080_info = { | 
|  | .description =	"NetChip TurboCONNECT", | 
|  | .flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_NC, | 
|  | .bind =		net1080_bind, | 
|  | .reset =	net1080_reset, | 
|  | .check_connect = net1080_check_connect, | 
|  | .rx_fixup =	net1080_rx_fixup, | 
|  | .tx_fixup =	net1080_tx_fixup, | 
|  | }; | 
|  |  | 
|  | static const struct usb_device_id	products [] = { | 
|  | { | 
|  | USB_DEVICE(0x0525, 0x1080),	// NetChip ref design | 
|  | .driver_info =	(unsigned long) &net1080_info, | 
|  | }, { | 
|  | USB_DEVICE(0x06D0, 0x0622),	// Laplink Gold | 
|  | .driver_info =	(unsigned long) &net1080_info, | 
|  | }, | 
|  | { },		// END | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, products); | 
|  |  | 
|  | static struct usb_driver net1080_driver = { | 
|  | .name =		"net1080", | 
|  | .id_table =	products, | 
|  | .probe =	usbnet_probe, | 
|  | .disconnect =	usbnet_disconnect, | 
|  | .suspend =	usbnet_suspend, | 
|  | .resume =	usbnet_resume, | 
|  | .disable_hub_initiated_lpm = 1, | 
|  | }; | 
|  |  | 
|  | module_usb_driver(net1080_driver); | 
|  |  | 
|  | MODULE_AUTHOR("David Brownell"); | 
|  | MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links"); | 
|  | MODULE_LICENSE("GPL"); |