|  | /* | 
|  | * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices | 
|  | * | 
|  | * Author : Liu Junliang <liujunliang_ljl@163.com> | 
|  | * | 
|  | * Based on dm9601.c | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public License | 
|  | * version 2.  This program is licensed "as is" without any warranty of any | 
|  | * kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/usb/usbnet.h> | 
|  |  | 
|  | #include "sr9700.h" | 
|  |  | 
|  | static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data, | 
|  | length); | 
|  | if ((err != length) && (err >= 0)) | 
|  | err = -EINVAL; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data, | 
|  | length); | 
|  | if ((err >= 0) && (err < length)) | 
|  | err = -EINVAL; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value) | 
|  | { | 
|  | return sr_read(dev, reg, 1, value); | 
|  | } | 
|  |  | 
|  | static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value) | 
|  | { | 
|  | return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, | 
|  | value, reg, NULL, 0); | 
|  | } | 
|  |  | 
|  | static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) | 
|  | { | 
|  | usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, | 
|  | 0, reg, data, length); | 
|  | } | 
|  |  | 
|  | static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value) | 
|  | { | 
|  | usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, | 
|  | value, reg, NULL, 0); | 
|  | } | 
|  |  | 
|  | static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < SR_SHARE_TIMEOUT; i++) { | 
|  | u8 tmp = 0; | 
|  | int ret; | 
|  |  | 
|  | udelay(1); | 
|  | ret = sr_read_reg(dev, SR_EPCR, &tmp); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* ready */ | 
|  | if (!(tmp & EPCR_ERRE)) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom"); | 
|  |  | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, | 
|  | __le16 *value) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&dev->phy_mutex); | 
|  |  | 
|  | sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); | 
|  | sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); | 
|  |  | 
|  | ret = wait_phy_eeprom_ready(dev, phy); | 
|  | if (ret < 0) | 
|  | goto out_unlock; | 
|  |  | 
|  | sr_write_reg(dev, SR_EPCR, 0x0); | 
|  | ret = sr_read(dev, SR_EPDR, 2, value); | 
|  |  | 
|  | netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", | 
|  | phy, reg, *value, ret); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, | 
|  | __le16 value) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&dev->phy_mutex); | 
|  |  | 
|  | ret = sr_write(dev, SR_EPDR, 2, &value); | 
|  | if (ret < 0) | 
|  | goto out_unlock; | 
|  |  | 
|  | sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); | 
|  | sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : | 
|  | (EPCR_WEP | EPCR_ERPRW)); | 
|  |  | 
|  | ret = wait_phy_eeprom_ready(dev, phy); | 
|  | if (ret < 0) | 
|  | goto out_unlock; | 
|  |  | 
|  | sr_write_reg(dev, SR_EPCR, 0x0); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&dev->phy_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) | 
|  | { | 
|  | return sr_share_read_word(dev, 0, offset, value); | 
|  | } | 
|  |  | 
|  | static int sr9700_get_eeprom_len(struct net_device *netdev) | 
|  | { | 
|  | return SR_EEPROM_LEN; | 
|  | } | 
|  |  | 
|  | static int sr9700_get_eeprom(struct net_device *netdev, | 
|  | struct ethtool_eeprom *eeprom, u8 *data) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 *buf = (__le16 *)data; | 
|  | int ret = 0; | 
|  | int i; | 
|  |  | 
|  | /* access is 16bit */ | 
|  | if ((eeprom->offset & 0x01) || (eeprom->len & 0x01)) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < eeprom->len / 2; i++) { | 
|  | ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i); | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 res; | 
|  | int rc = 0; | 
|  |  | 
|  | if (phy_id) { | 
|  | netdev_dbg(netdev, "Only internal phy supported\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Access NSR_LINKST bit for link status instead of MII_BMSR */ | 
|  | if (loc == MII_BMSR) { | 
|  | u8 value; | 
|  |  | 
|  | sr_read_reg(dev, SR_NSR, &value); | 
|  | if (value & NSR_LINKST) | 
|  | rc = 1; | 
|  | } | 
|  | sr_share_read_word(dev, 1, loc, &res); | 
|  | if (rc == 1) | 
|  | res = le16_to_cpu(res) | BMSR_LSTATUS; | 
|  | else | 
|  | res = le16_to_cpu(res) & ~BMSR_LSTATUS; | 
|  |  | 
|  | netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", | 
|  | phy_id, loc, res); | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc, | 
|  | int val) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | __le16 res = cpu_to_le16(val); | 
|  |  | 
|  | if (phy_id) { | 
|  | netdev_dbg(netdev, "Only internal phy supported\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", | 
|  | phy_id, loc, val); | 
|  |  | 
|  | sr_share_write_word(dev, 1, loc, res); | 
|  | } | 
|  |  | 
|  | static u32 sr9700_get_link(struct net_device *netdev) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | u8 value = 0; | 
|  | int rc = 0; | 
|  |  | 
|  | /* Get the Link Status directly */ | 
|  | sr_read_reg(dev, SR_NSR, &value); | 
|  | if (value & NSR_LINKST) | 
|  | rc = 1; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  |  | 
|  | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops sr9700_ethtool_ops = { | 
|  | .get_drvinfo	= usbnet_get_drvinfo, | 
|  | .get_link	= sr9700_get_link, | 
|  | .get_msglevel	= usbnet_get_msglevel, | 
|  | .set_msglevel	= usbnet_set_msglevel, | 
|  | .get_eeprom_len	= sr9700_get_eeprom_len, | 
|  | .get_eeprom	= sr9700_get_eeprom, | 
|  | .nway_reset	= usbnet_nway_reset, | 
|  | .get_link_ksettings	= usbnet_get_link_ksettings, | 
|  | .set_link_ksettings	= usbnet_set_link_ksettings, | 
|  | }; | 
|  |  | 
|  | static void sr9700_set_multicast(struct net_device *netdev) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | /* We use the 20 byte dev->data for our 8 byte filter buffer | 
|  | * to avoid allocating memory that is tricky to free later | 
|  | */ | 
|  | u8 *hashes = (u8 *)&dev->data; | 
|  | /* rx_ctl setting : enable, disable_long, disable_crc */ | 
|  | u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG; | 
|  |  | 
|  | memset(hashes, 0x00, SR_MCAST_SIZE); | 
|  | /* broadcast address */ | 
|  | hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG; | 
|  | if (netdev->flags & IFF_PROMISC) { | 
|  | rx_ctl |= RCR_PRMSC; | 
|  | } else if (netdev->flags & IFF_ALLMULTI || | 
|  | netdev_mc_count(netdev) > SR_MCAST_MAX) { | 
|  | rx_ctl |= RCR_RUNT; | 
|  | } else if (!netdev_mc_empty(netdev)) { | 
|  | struct netdev_hw_addr *ha; | 
|  |  | 
|  | netdev_for_each_mc_addr(ha, netdev) { | 
|  | u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26; | 
|  | hashes[crc >> 3] |= 1 << (crc & 0x7); | 
|  | } | 
|  | } | 
|  |  | 
|  | sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes); | 
|  | sr_write_reg_async(dev, SR_RCR, rx_ctl); | 
|  | } | 
|  |  | 
|  | static int sr9700_set_mac_address(struct net_device *netdev, void *p) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | struct sockaddr *addr = p; | 
|  |  | 
|  | if (!is_valid_ether_addr(addr->sa_data)) { | 
|  | netdev_err(netdev, "not setting invalid mac address %pM\n", | 
|  | addr->sa_data); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | 
|  | sr_write_async(dev, SR_PAR, 6, netdev->dev_addr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops sr9700_netdev_ops = { | 
|  | .ndo_open		= usbnet_open, | 
|  | .ndo_stop		= usbnet_stop, | 
|  | .ndo_start_xmit		= usbnet_start_xmit, | 
|  | .ndo_tx_timeout		= usbnet_tx_timeout, | 
|  | .ndo_change_mtu		= usbnet_change_mtu, | 
|  | .ndo_get_stats64	= usbnet_get_stats64, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | .ndo_do_ioctl		= sr9700_ioctl, | 
|  | .ndo_set_rx_mode	= sr9700_set_multicast, | 
|  | .ndo_set_mac_address	= sr9700_set_mac_address, | 
|  | }; | 
|  |  | 
|  | static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) | 
|  | { | 
|  | struct net_device *netdev; | 
|  | struct mii_if_info *mii; | 
|  | int ret; | 
|  |  | 
|  | ret = usbnet_get_endpoints(dev, intf); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | netdev = dev->net; | 
|  |  | 
|  | netdev->netdev_ops = &sr9700_netdev_ops; | 
|  | netdev->ethtool_ops = &sr9700_ethtool_ops; | 
|  | netdev->hard_header_len += SR_TX_OVERHEAD; | 
|  | dev->hard_mtu = netdev->mtu + netdev->hard_header_len; | 
|  | /* bulkin buffer is preferably not less than 3K */ | 
|  | dev->rx_urb_size = 3072; | 
|  |  | 
|  | mii = &dev->mii; | 
|  | mii->dev = netdev; | 
|  | mii->mdio_read = sr_mdio_read; | 
|  | mii->mdio_write = sr_mdio_write; | 
|  | mii->phy_id_mask = 0x1f; | 
|  | mii->reg_num_mask = 0x1f; | 
|  |  | 
|  | sr_write_reg(dev, SR_NCR, NCR_RST); | 
|  | udelay(20); | 
|  |  | 
|  | /* read MAC | 
|  | * After Chip Power on, the Chip will reload the MAC from | 
|  | * EEPROM automatically to PAR. In case there is no EEPROM externally, | 
|  | * a default MAC address is stored in PAR for making chip work properly. | 
|  | */ | 
|  | if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) { | 
|  | netdev_err(netdev, "Error reading MAC address\n"); | 
|  | ret = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* power up and reset phy */ | 
|  | sr_write_reg(dev, SR_PRR, PRR_PHY_RST); | 
|  | /* at least 10ms, here 20ms for safe */ | 
|  | msleep(20); | 
|  | sr_write_reg(dev, SR_PRR, 0); | 
|  | /* at least 1ms, here 2ms for reading right register */ | 
|  | udelay(2 * 1000); | 
|  |  | 
|  | /* receive broadcast packets */ | 
|  | sr9700_set_multicast(netdev); | 
|  |  | 
|  | sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET); | 
|  | sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL | | 
|  | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); | 
|  | mii_nway_restart(mii); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | 
|  | { | 
|  | struct sk_buff *sr_skb; | 
|  | int len; | 
|  |  | 
|  | /* skb content (packets) format : | 
|  | *                    p0            p1            p2    ......    pm | 
|  | *                 /      \ | 
|  | *            /                \ | 
|  | *        /                            \ | 
|  | *  /                                        \ | 
|  | * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn | 
|  | * | 
|  | * p0 : packet 0 | 
|  | * p0b0 : packet 0 byte 0 | 
|  | * | 
|  | * b0: rx status | 
|  | * b1: packet length (incl crc) low | 
|  | * b2: packet length (incl crc) high | 
|  | * b3..n-4: packet data | 
|  | * bn-3..bn: ethernet packet crc | 
|  | */ | 
|  | if (unlikely(skb->len < SR_RX_OVERHEAD)) { | 
|  | netdev_err(dev->net, "unexpected tiny rx frame\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* one skb may contains multiple packets */ | 
|  | while (skb->len > SR_RX_OVERHEAD) { | 
|  | if (skb->data[0] != 0x40) | 
|  | return 0; | 
|  |  | 
|  | /* ignore the CRC length */ | 
|  | len = (skb->data[1] | (skb->data[2] << 8)) - 4; | 
|  |  | 
|  | if (len > ETH_FRAME_LEN) | 
|  | return 0; | 
|  |  | 
|  | /* the last packet of current skb */ | 
|  | if (skb->len == (len + SR_RX_OVERHEAD))	{ | 
|  | skb_pull(skb, 3); | 
|  | skb->len = len; | 
|  | skb_set_tail_pointer(skb, len); | 
|  | skb->truesize = len + sizeof(struct sk_buff); | 
|  | return 2; | 
|  | } | 
|  |  | 
|  | /* skb_clone is used for address align */ | 
|  | sr_skb = skb_clone(skb, GFP_ATOMIC); | 
|  | if (!sr_skb) | 
|  | return 0; | 
|  |  | 
|  | sr_skb->len = len; | 
|  | sr_skb->data = skb->data + 3; | 
|  | skb_set_tail_pointer(sr_skb, len); | 
|  | sr_skb->truesize = len + sizeof(struct sk_buff); | 
|  | usbnet_skb_return(dev, sr_skb); | 
|  |  | 
|  | skb_pull(skb, len + SR_RX_OVERHEAD); | 
|  | }; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb, | 
|  | gfp_t flags) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | /* SR9700 can only send out one ethernet packet at once. | 
|  | * | 
|  | * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn | 
|  | * | 
|  | * b0: rx status | 
|  | * b1: packet length (incl crc) low | 
|  | * b2: packet length (incl crc) high | 
|  | * b3..n-4: packet data | 
|  | * bn-3..bn: ethernet packet crc | 
|  | */ | 
|  |  | 
|  | len = skb->len; | 
|  |  | 
|  | if (skb_cow_head(skb, SR_TX_OVERHEAD)) { | 
|  | dev_kfree_skb_any(skb); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | __skb_push(skb, SR_TX_OVERHEAD); | 
|  |  | 
|  | /* usbnet adds padding if length is a multiple of packet size | 
|  | * if so, adjust length value in header | 
|  | */ | 
|  | if ((skb->len % dev->maxpacket) == 0) | 
|  | len++; | 
|  |  | 
|  | skb->data[0] = len; | 
|  | skb->data[1] = len >> 8; | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static void sr9700_status(struct usbnet *dev, struct urb *urb) | 
|  | { | 
|  | int link; | 
|  | u8 *buf; | 
|  |  | 
|  | /* format: | 
|  | b0: net status | 
|  | b1: tx status 1 | 
|  | b2: tx status 2 | 
|  | b3: rx status | 
|  | b4: rx overflow | 
|  | b5: rx count | 
|  | b6: tx count | 
|  | b7: gpr | 
|  | */ | 
|  |  | 
|  | if (urb->actual_length < 8) | 
|  | return; | 
|  |  | 
|  | buf = urb->transfer_buffer; | 
|  |  | 
|  | link = !!(buf[0] & 0x40); | 
|  | if (netif_carrier_ok(dev->net) != link) { | 
|  | usbnet_link_change(dev, link, 1); | 
|  | netdev_dbg(dev->net, "Link Status is: %d\n", link); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int sr9700_link_reset(struct usbnet *dev) | 
|  | { | 
|  | struct ethtool_cmd ecmd; | 
|  |  | 
|  | mii_check_media(&dev->mii, 1, 1); | 
|  | mii_ethtool_gset(&dev->mii, &ecmd); | 
|  |  | 
|  | netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n", | 
|  | ecmd.speed, ecmd.duplex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct driver_info sr9700_driver_info = { | 
|  | .description	= "CoreChip SR9700 USB Ethernet", | 
|  | .flags		= FLAG_ETHER, | 
|  | .bind		= sr9700_bind, | 
|  | .rx_fixup	= sr9700_rx_fixup, | 
|  | .tx_fixup	= sr9700_tx_fixup, | 
|  | .status		= sr9700_status, | 
|  | .link_reset	= sr9700_link_reset, | 
|  | .reset		= sr9700_link_reset, | 
|  | }; | 
|  |  | 
|  | static const struct usb_device_id products[] = { | 
|  | { | 
|  | USB_DEVICE(0x0fe6, 0x9700),	/* SR9700 device */ | 
|  | .driver_info = (unsigned long)&sr9700_driver_info, | 
|  | }, | 
|  | {},			/* END */ | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(usb, products); | 
|  |  | 
|  | static struct usb_driver sr9700_usb_driver = { | 
|  | .name		= "sr9700", | 
|  | .id_table	= products, | 
|  | .probe		= usbnet_probe, | 
|  | .disconnect	= usbnet_disconnect, | 
|  | .suspend	= usbnet_suspend, | 
|  | .resume		= usbnet_resume, | 
|  | .disable_hub_initiated_lpm = 1, | 
|  | }; | 
|  |  | 
|  | module_usb_driver(sr9700_usb_driver); | 
|  |  | 
|  | MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>"); | 
|  | MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/"); | 
|  | MODULE_LICENSE("GPL"); |