| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Copyright 2018 Linaro Limited | 
 |  * | 
 |  * Author: Daniel Lezcano <daniel.lezcano@linaro.org> | 
 |  * | 
 |  * The idle injection framework provides a way to force CPUs to enter idle | 
 |  * states for a specified fraction of time over a specified period. | 
 |  * | 
 |  * It relies on the smpboot kthreads feature providing common code for CPU | 
 |  * hotplug and thread [un]parking. | 
 |  * | 
 |  * All of the kthreads used for idle injection are created at init time. | 
 |  * | 
 |  * Next, the users of the the idle injection framework provide a cpumask via | 
 |  * its register function. The kthreads will be synchronized with respect to | 
 |  * this cpumask. | 
 |  * | 
 |  * The idle + run duration is specified via separate helpers and that allows | 
 |  * idle injection to be started. | 
 |  * | 
 |  * The idle injection kthreads will call play_idle() with the idle duration | 
 |  * specified as per the above. | 
 |  * | 
 |  * After all of them have been woken up, a timer is set to start the next idle | 
 |  * injection cycle. | 
 |  * | 
 |  * The timer interrupt handler will wake up the idle injection kthreads for | 
 |  * all of the CPUs in the cpumask provided by the user. | 
 |  * | 
 |  * Idle injection is stopped synchronously and no leftover idle injection | 
 |  * kthread activity after its completion is guaranteed. | 
 |  * | 
 |  * It is up to the user of this framework to provide a lock for higher-level | 
 |  * synchronization to prevent race conditions like starting idle injection | 
 |  * while unregistering from the framework. | 
 |  */ | 
 | #define pr_fmt(fmt) "ii_dev: " fmt | 
 |  | 
 | #include <linux/cpu.h> | 
 | #include <linux/hrtimer.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/smpboot.h> | 
 |  | 
 | #include <uapi/linux/sched/types.h> | 
 |  | 
 | /** | 
 |  * struct idle_inject_thread - task on/off switch structure | 
 |  * @tsk: task injecting the idle cycles | 
 |  * @should_run: whether or not to run the task (for the smpboot kthread API) | 
 |  */ | 
 | struct idle_inject_thread { | 
 | 	struct task_struct *tsk; | 
 | 	int should_run; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct idle_inject_device - idle injection data | 
 |  * @timer: idle injection period timer | 
 |  * @idle_duration_ms: duration of CPU idle time to inject | 
 |  * @run_duration_ms: duration of CPU run time to allow | 
 |  * @cpumask: mask of CPUs affected by idle injection | 
 |  */ | 
 | struct idle_inject_device { | 
 | 	struct hrtimer timer; | 
 | 	unsigned int idle_duration_ms; | 
 | 	unsigned int run_duration_ms; | 
 | 	unsigned long int cpumask[0]; | 
 | }; | 
 |  | 
 | static DEFINE_PER_CPU(struct idle_inject_thread, idle_inject_thread); | 
 | static DEFINE_PER_CPU(struct idle_inject_device *, idle_inject_device); | 
 |  | 
 | /** | 
 |  * idle_inject_wakeup - Wake up idle injection threads | 
 |  * @ii_dev: target idle injection device | 
 |  * | 
 |  * Every idle injection task associated with the given idle injection device | 
 |  * and running on an online CPU will be woken up. | 
 |  */ | 
 | static void idle_inject_wakeup(struct idle_inject_device *ii_dev) | 
 | { | 
 | 	struct idle_inject_thread *iit; | 
 | 	unsigned int cpu; | 
 |  | 
 | 	for_each_cpu_and(cpu, to_cpumask(ii_dev->cpumask), cpu_online_mask) { | 
 | 		iit = per_cpu_ptr(&idle_inject_thread, cpu); | 
 | 		iit->should_run = 1; | 
 | 		wake_up_process(iit->tsk); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_timer_fn - idle injection timer function | 
 |  * @timer: idle injection hrtimer | 
 |  * | 
 |  * This function is called when the idle injection timer expires.  It wakes up | 
 |  * idle injection tasks associated with the timer and they, in turn, invoke | 
 |  * play_idle() to inject a specified amount of CPU idle time. | 
 |  * | 
 |  * Return: HRTIMER_RESTART. | 
 |  */ | 
 | static enum hrtimer_restart idle_inject_timer_fn(struct hrtimer *timer) | 
 | { | 
 | 	unsigned int duration_ms; | 
 | 	struct idle_inject_device *ii_dev = | 
 | 		container_of(timer, struct idle_inject_device, timer); | 
 |  | 
 | 	duration_ms = READ_ONCE(ii_dev->run_duration_ms); | 
 | 	duration_ms += READ_ONCE(ii_dev->idle_duration_ms); | 
 |  | 
 | 	idle_inject_wakeup(ii_dev); | 
 |  | 
 | 	hrtimer_forward_now(timer, ms_to_ktime(duration_ms)); | 
 |  | 
 | 	return HRTIMER_RESTART; | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_fn - idle injection work function | 
 |  * @cpu: the CPU owning the task | 
 |  * | 
 |  * This function calls play_idle() to inject a specified amount of CPU idle | 
 |  * time. | 
 |  */ | 
 | static void idle_inject_fn(unsigned int cpu) | 
 | { | 
 | 	struct idle_inject_device *ii_dev; | 
 | 	struct idle_inject_thread *iit; | 
 |  | 
 | 	ii_dev = per_cpu(idle_inject_device, cpu); | 
 | 	iit = per_cpu_ptr(&idle_inject_thread, cpu); | 
 |  | 
 | 	/* | 
 | 	 * Let the smpboot main loop know that the task should not run again. | 
 | 	 */ | 
 | 	iit->should_run = 0; | 
 |  | 
 | 	play_idle(READ_ONCE(ii_dev->idle_duration_ms)); | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_set_duration - idle and run duration update helper | 
 |  * @run_duration_ms: CPU run time to allow in milliseconds | 
 |  * @idle_duration_ms: CPU idle time to inject in milliseconds | 
 |  */ | 
 | void idle_inject_set_duration(struct idle_inject_device *ii_dev, | 
 | 			      unsigned int run_duration_ms, | 
 | 			      unsigned int idle_duration_ms) | 
 | { | 
 | 	if (run_duration_ms && idle_duration_ms) { | 
 | 		WRITE_ONCE(ii_dev->run_duration_ms, run_duration_ms); | 
 | 		WRITE_ONCE(ii_dev->idle_duration_ms, idle_duration_ms); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_get_duration - idle and run duration retrieval helper | 
 |  * @run_duration_ms: memory location to store the current CPU run time | 
 |  * @idle_duration_ms: memory location to store the current CPU idle time | 
 |  */ | 
 | void idle_inject_get_duration(struct idle_inject_device *ii_dev, | 
 | 			      unsigned int *run_duration_ms, | 
 | 			      unsigned int *idle_duration_ms) | 
 | { | 
 | 	*run_duration_ms = READ_ONCE(ii_dev->run_duration_ms); | 
 | 	*idle_duration_ms = READ_ONCE(ii_dev->idle_duration_ms); | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_start - start idle injections | 
 |  * @ii_dev: idle injection control device structure | 
 |  * | 
 |  * The function starts idle injection by first waking up all of the idle | 
 |  * injection kthreads associated with @ii_dev to let them inject CPU idle time | 
 |  * sets up a timer to start the next idle injection period. | 
 |  * | 
 |  * Return: -EINVAL if the CPU idle or CPU run time is not set or 0 on success. | 
 |  */ | 
 | int idle_inject_start(struct idle_inject_device *ii_dev) | 
 | { | 
 | 	unsigned int idle_duration_ms = READ_ONCE(ii_dev->idle_duration_ms); | 
 | 	unsigned int run_duration_ms = READ_ONCE(ii_dev->run_duration_ms); | 
 |  | 
 | 	if (!idle_duration_ms || !run_duration_ms) | 
 | 		return -EINVAL; | 
 |  | 
 | 	pr_debug("Starting injecting idle cycles on CPUs '%*pbl'\n", | 
 | 		 cpumask_pr_args(to_cpumask(ii_dev->cpumask))); | 
 |  | 
 | 	idle_inject_wakeup(ii_dev); | 
 |  | 
 | 	hrtimer_start(&ii_dev->timer, | 
 | 		      ms_to_ktime(idle_duration_ms + run_duration_ms), | 
 | 		      HRTIMER_MODE_REL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_stop - stops idle injections | 
 |  * @ii_dev: idle injection control device structure | 
 |  * | 
 |  * The function stops idle injection and waits for the threads to finish work. | 
 |  * If CPU idle time is being injected when this function runs, then it will | 
 |  * wait until the end of the cycle. | 
 |  * | 
 |  * When it returns, there is no more idle injection kthread activity.  The | 
 |  * kthreads are scheduled out and the periodic timer is off. | 
 |  */ | 
 | void idle_inject_stop(struct idle_inject_device *ii_dev) | 
 | { | 
 | 	struct idle_inject_thread *iit; | 
 | 	unsigned int cpu; | 
 |  | 
 | 	pr_debug("Stopping idle injection on CPUs '%*pbl'\n", | 
 | 		 cpumask_pr_args(to_cpumask(ii_dev->cpumask))); | 
 |  | 
 | 	hrtimer_cancel(&ii_dev->timer); | 
 |  | 
 | 	/* | 
 | 	 * Stopping idle injection requires all of the idle injection kthreads | 
 | 	 * associated with the given cpumask to be parked and stay that way, so | 
 | 	 * prevent CPUs from going online at this point.  Any CPUs going online | 
 | 	 * after the loop below will be covered by clearing the should_run flag | 
 | 	 * that will cause the smpboot main loop to schedule them out. | 
 | 	 */ | 
 | 	cpu_hotplug_disable(); | 
 |  | 
 | 	/* | 
 | 	 * Iterate over all (online + offline) CPUs here in case one of them | 
 | 	 * goes offline with the should_run flag set so as to prevent its idle | 
 | 	 * injection kthread from running when the CPU goes online again after | 
 | 	 * the ii_dev has been freed. | 
 | 	 */ | 
 | 	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) { | 
 | 		iit = per_cpu_ptr(&idle_inject_thread, cpu); | 
 | 		iit->should_run = 0; | 
 |  | 
 | 		wait_task_inactive(iit->tsk, 0); | 
 | 	} | 
 |  | 
 | 	cpu_hotplug_enable(); | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_setup - prepare the current task for idle injection | 
 |  * @cpu: not used | 
 |  * | 
 |  * Called once, this function is in charge of setting the current task's | 
 |  * scheduler parameters to make it an RT task. | 
 |  */ | 
 | static void idle_inject_setup(unsigned int cpu) | 
 | { | 
 | 	struct sched_param param = { .sched_priority = MAX_USER_RT_PRIO / 2 }; | 
 |  | 
 | 	sched_setscheduler(current, SCHED_FIFO, ¶m); | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_should_run - function helper for the smpboot API | 
 |  * @cpu: CPU the kthread is running on | 
 |  * | 
 |  * Return: whether or not the thread can run. | 
 |  */ | 
 | static int idle_inject_should_run(unsigned int cpu) | 
 | { | 
 | 	struct idle_inject_thread *iit = | 
 | 		per_cpu_ptr(&idle_inject_thread, cpu); | 
 |  | 
 | 	return iit->should_run; | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_register - initialize idle injection on a set of CPUs | 
 |  * @cpumask: CPUs to be affected by idle injection | 
 |  * | 
 |  * This function creates an idle injection control device structure for the | 
 |  * given set of CPUs and initializes the timer associated with it.  It does not | 
 |  * start any injection cycles. | 
 |  * | 
 |  * Return: NULL if memory allocation fails, idle injection control device | 
 |  * pointer on success. | 
 |  */ | 
 | struct idle_inject_device *idle_inject_register(struct cpumask *cpumask) | 
 | { | 
 | 	struct idle_inject_device *ii_dev; | 
 | 	int cpu, cpu_rb; | 
 |  | 
 | 	ii_dev = kzalloc(sizeof(*ii_dev) + cpumask_size(), GFP_KERNEL); | 
 | 	if (!ii_dev) | 
 | 		return NULL; | 
 |  | 
 | 	cpumask_copy(to_cpumask(ii_dev->cpumask), cpumask); | 
 | 	hrtimer_init(&ii_dev->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
 | 	ii_dev->timer.function = idle_inject_timer_fn; | 
 |  | 
 | 	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) { | 
 |  | 
 | 		if (per_cpu(idle_inject_device, cpu)) { | 
 | 			pr_err("cpu%d is already registered\n", cpu); | 
 | 			goto out_rollback; | 
 | 		} | 
 |  | 
 | 		per_cpu(idle_inject_device, cpu) = ii_dev; | 
 | 	} | 
 |  | 
 | 	return ii_dev; | 
 |  | 
 | out_rollback: | 
 | 	for_each_cpu(cpu_rb, to_cpumask(ii_dev->cpumask)) { | 
 | 		if (cpu == cpu_rb) | 
 | 			break; | 
 | 		per_cpu(idle_inject_device, cpu_rb) = NULL; | 
 | 	} | 
 |  | 
 | 	kfree(ii_dev); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * idle_inject_unregister - unregister idle injection control device | 
 |  * @ii_dev: idle injection control device to unregister | 
 |  * | 
 |  * The function stops idle injection for the given control device, | 
 |  * unregisters its kthreads and frees memory allocated when that device was | 
 |  * created. | 
 |  */ | 
 | void idle_inject_unregister(struct idle_inject_device *ii_dev) | 
 | { | 
 | 	unsigned int cpu; | 
 |  | 
 | 	idle_inject_stop(ii_dev); | 
 |  | 
 | 	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) | 
 | 		per_cpu(idle_inject_device, cpu) = NULL; | 
 |  | 
 | 	kfree(ii_dev); | 
 | } | 
 |  | 
 | static struct smp_hotplug_thread idle_inject_threads = { | 
 | 	.store = &idle_inject_thread.tsk, | 
 | 	.setup = idle_inject_setup, | 
 | 	.thread_fn = idle_inject_fn, | 
 | 	.thread_comm = "idle_inject/%u", | 
 | 	.thread_should_run = idle_inject_should_run, | 
 | }; | 
 |  | 
 | static int __init idle_inject_init(void) | 
 | { | 
 | 	return smpboot_register_percpu_thread(&idle_inject_threads); | 
 | } | 
 | early_initcall(idle_inject_init); |