| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * GPIO support for Cirrus Logic Madera codecs | 
 |  * | 
 |  * Copyright (C) 2015-2018 Cirrus Logic | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by the | 
 |  * Free Software Foundation; version 2. | 
 |  */ | 
 |  | 
 | #include <linux/gpio/driver.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #include <linux/mfd/madera/core.h> | 
 | #include <linux/mfd/madera/pdata.h> | 
 | #include <linux/mfd/madera/registers.h> | 
 |  | 
 | struct madera_gpio { | 
 | 	struct madera *madera; | 
 | 	/* storage space for the gpio_chip we're using */ | 
 | 	struct gpio_chip gpio_chip; | 
 | }; | 
 |  | 
 | static int madera_gpio_get_direction(struct gpio_chip *chip, | 
 | 				     unsigned int offset) | 
 | { | 
 | 	struct madera_gpio *madera_gpio = gpiochip_get_data(chip); | 
 | 	struct madera *madera = madera_gpio->madera; | 
 | 	unsigned int reg_offset = 2 * offset; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_2 + reg_offset, | 
 | 			  &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return !!(val & MADERA_GP1_DIR_MASK); | 
 | } | 
 |  | 
 | static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int offset) | 
 | { | 
 | 	struct madera_gpio *madera_gpio = gpiochip_get_data(chip); | 
 | 	struct madera *madera = madera_gpio->madera; | 
 | 	unsigned int reg_offset = 2 * offset; | 
 |  | 
 | 	return regmap_update_bits(madera->regmap, | 
 | 				  MADERA_GPIO1_CTRL_2 + reg_offset, | 
 | 				  MADERA_GP1_DIR_MASK, MADERA_GP1_DIR); | 
 | } | 
 |  | 
 | static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset) | 
 | { | 
 | 	struct madera_gpio *madera_gpio = gpiochip_get_data(chip); | 
 | 	struct madera *madera = madera_gpio->madera; | 
 | 	unsigned int reg_offset = 2 * offset; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_1 + reg_offset, | 
 | 			  &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return !!(val & MADERA_GP1_LVL_MASK); | 
 | } | 
 |  | 
 | static int madera_gpio_direction_out(struct gpio_chip *chip, | 
 | 				     unsigned int offset, int value) | 
 | { | 
 | 	struct madera_gpio *madera_gpio = gpiochip_get_data(chip); | 
 | 	struct madera *madera = madera_gpio->madera; | 
 | 	unsigned int reg_offset = 2 * offset; | 
 | 	unsigned int reg_val = value ? MADERA_GP1_LVL : 0; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_update_bits(madera->regmap, | 
 | 				 MADERA_GPIO1_CTRL_2 + reg_offset, | 
 | 				 MADERA_GP1_DIR_MASK, 0); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return regmap_update_bits(madera->regmap, | 
 | 				  MADERA_GPIO1_CTRL_1 + reg_offset, | 
 | 				  MADERA_GP1_LVL_MASK, reg_val); | 
 | } | 
 |  | 
 | static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset, | 
 | 			    int value) | 
 | { | 
 | 	struct madera_gpio *madera_gpio = gpiochip_get_data(chip); | 
 | 	struct madera *madera = madera_gpio->madera; | 
 | 	unsigned int reg_offset = 2 * offset; | 
 | 	unsigned int reg_val = value ? MADERA_GP1_LVL : 0; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_update_bits(madera->regmap, | 
 | 				 MADERA_GPIO1_CTRL_1 + reg_offset, | 
 | 				 MADERA_GP1_LVL_MASK, reg_val); | 
 |  | 
 | 	/* set() doesn't return an error so log a warning */ | 
 | 	if (ret) | 
 | 		dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n", | 
 | 			 MADERA_GPIO1_CTRL_1 + reg_offset, ret); | 
 | } | 
 |  | 
 | static struct gpio_chip madera_gpio_chip = { | 
 | 	.label			= "madera", | 
 | 	.owner			= THIS_MODULE, | 
 | 	.request		= gpiochip_generic_request, | 
 | 	.free			= gpiochip_generic_free, | 
 | 	.get_direction		= madera_gpio_get_direction, | 
 | 	.direction_input	= madera_gpio_direction_in, | 
 | 	.get			= madera_gpio_get, | 
 | 	.direction_output	= madera_gpio_direction_out, | 
 | 	.set			= madera_gpio_set, | 
 | 	.set_config		= gpiochip_generic_config, | 
 | 	.can_sleep		= true, | 
 | }; | 
 |  | 
 | static int madera_gpio_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct madera *madera = dev_get_drvdata(pdev->dev.parent); | 
 | 	struct madera_pdata *pdata = dev_get_platdata(madera->dev); | 
 | 	struct madera_gpio *madera_gpio; | 
 | 	int ret; | 
 |  | 
 | 	madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio), | 
 | 				   GFP_KERNEL); | 
 | 	if (!madera_gpio) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	madera_gpio->madera = madera; | 
 |  | 
 | 	/* Construct suitable gpio_chip from the template in madera_gpio_chip */ | 
 | 	madera_gpio->gpio_chip = madera_gpio_chip; | 
 | 	madera_gpio->gpio_chip.parent = pdev->dev.parent; | 
 |  | 
 | 	switch (madera->type) { | 
 | 	case CS47L35: | 
 | 		madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS; | 
 | 		break; | 
 | 	case CS47L85: | 
 | 	case WM1840: | 
 | 		madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS; | 
 | 		break; | 
 | 	case CS47L90: | 
 | 	case CS47L91: | 
 | 		madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(&pdev->dev, "Unknown chip variant %d\n", madera->type); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* We want to be usable on systems that don't use devicetree or acpi */ | 
 | 	if (pdata && pdata->gpio_base) | 
 | 		madera_gpio->gpio_chip.base = pdata->gpio_base; | 
 | 	else | 
 | 		madera_gpio->gpio_chip.base = -1; | 
 |  | 
 | 	ret = devm_gpiochip_add_data(&pdev->dev, | 
 | 				     &madera_gpio->gpio_chip, | 
 | 				     madera_gpio); | 
 | 	if (ret < 0) { | 
 | 		dev_dbg(&pdev->dev, "Could not register gpiochip, %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * This is part of a composite MFD device which can only be used with | 
 | 	 * the corresponding pinctrl driver. On all supported silicon the GPIO | 
 | 	 * to pinctrl mapping is fixed in the silicon, so we register it | 
 | 	 * explicitly instead of requiring a redundant gpio-ranges in the | 
 | 	 * devicetree. | 
 | 	 * In any case we also want to work on systems that don't use devicetree | 
 | 	 * or acpi. | 
 | 	 */ | 
 | 	ret = gpiochip_add_pin_range(&madera_gpio->gpio_chip, "madera-pinctrl", | 
 | 				     0, 0, madera_gpio->gpio_chip.ngpio); | 
 | 	if (ret) { | 
 | 		dev_dbg(&pdev->dev, "Failed to add pin range (%d)\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver madera_gpio_driver = { | 
 | 	.driver = { | 
 | 		.name	= "madera-gpio", | 
 | 	}, | 
 | 	.probe		= madera_gpio_probe, | 
 | }; | 
 |  | 
 | module_platform_driver(madera_gpio_driver); | 
 |  | 
 | MODULE_SOFTDEP("pre: pinctrl-madera"); | 
 | MODULE_DESCRIPTION("GPIO interface for Madera codecs"); | 
 | MODULE_AUTHOR("Nariman Poushin <nariman@opensource.cirrus.com>"); | 
 | MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_ALIAS("platform:madera-gpio"); |