| /* | 
 |  * TI AM33XX SRAM EMIF Driver | 
 |  * | 
 |  * Copyright (C) 2016-2017 Texas Instruments Inc. | 
 |  *	Dave Gerlach | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/genalloc.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/sram.h> | 
 | #include <linux/ti-emif-sram.h> | 
 |  | 
 | #include "emif.h" | 
 |  | 
 | #define TI_EMIF_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \ | 
 | 					 (unsigned long)&ti_emif_sram) | 
 |  | 
 | #define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES		0x00a0 | 
 |  | 
 | struct ti_emif_data { | 
 | 	phys_addr_t ti_emif_sram_phys; | 
 | 	phys_addr_t ti_emif_sram_data_phys; | 
 | 	unsigned long ti_emif_sram_virt; | 
 | 	unsigned long ti_emif_sram_data_virt; | 
 | 	struct gen_pool *sram_pool_code; | 
 | 	struct gen_pool	*sram_pool_data; | 
 | 	struct ti_emif_pm_data pm_data; | 
 | 	struct ti_emif_pm_functions pm_functions; | 
 | }; | 
 |  | 
 | static struct ti_emif_data *emif_instance; | 
 |  | 
 | static u32 sram_suspend_address(struct ti_emif_data *emif_data, | 
 | 				unsigned long addr) | 
 | { | 
 | 	return (emif_data->ti_emif_sram_virt + | 
 | 		TI_EMIF_SRAM_SYMBOL_OFFSET(addr)); | 
 | } | 
 |  | 
 | static phys_addr_t sram_resume_address(struct ti_emif_data *emif_data, | 
 | 				       unsigned long addr) | 
 | { | 
 | 	return ((unsigned long)emif_data->ti_emif_sram_phys + | 
 | 		TI_EMIF_SRAM_SYMBOL_OFFSET(addr)); | 
 | } | 
 |  | 
 | static void ti_emif_free_sram(struct ti_emif_data *emif_data) | 
 | { | 
 | 	gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt, | 
 | 		      ti_emif_sram_sz); | 
 | 	gen_pool_free(emif_data->sram_pool_data, | 
 | 		      emif_data->ti_emif_sram_data_virt, | 
 | 		      sizeof(struct emif_regs_amx3)); | 
 | } | 
 |  | 
 | static int ti_emif_alloc_sram(struct device *dev, | 
 | 			      struct ti_emif_data *emif_data) | 
 | { | 
 | 	struct device_node *np = dev->of_node; | 
 | 	int ret; | 
 |  | 
 | 	emif_data->sram_pool_code = of_gen_pool_get(np, "sram", 0); | 
 | 	if (!emif_data->sram_pool_code) { | 
 | 		dev_err(dev, "Unable to get sram pool for ocmcram code\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	emif_data->ti_emif_sram_virt = | 
 | 			gen_pool_alloc(emif_data->sram_pool_code, | 
 | 				       ti_emif_sram_sz); | 
 | 	if (!emif_data->ti_emif_sram_virt) { | 
 | 		dev_err(dev, "Unable to allocate code memory from ocmcram\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* Save physical address to calculate resume offset during pm init */ | 
 | 	emif_data->ti_emif_sram_phys = | 
 | 			gen_pool_virt_to_phys(emif_data->sram_pool_code, | 
 | 					      emif_data->ti_emif_sram_virt); | 
 |  | 
 | 	/* Get sram pool for data section and allocate space */ | 
 | 	emif_data->sram_pool_data = of_gen_pool_get(np, "sram", 1); | 
 | 	if (!emif_data->sram_pool_data) { | 
 | 		dev_err(dev, "Unable to get sram pool for ocmcram data\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err_free_sram_code; | 
 | 	} | 
 |  | 
 | 	emif_data->ti_emif_sram_data_virt = | 
 | 				gen_pool_alloc(emif_data->sram_pool_data, | 
 | 					       sizeof(struct emif_regs_amx3)); | 
 | 	if (!emif_data->ti_emif_sram_data_virt) { | 
 | 		dev_err(dev, "Unable to allocate data memory from ocmcram\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_sram_code; | 
 | 	} | 
 |  | 
 | 	/* Save physical address to calculate resume offset during pm init */ | 
 | 	emif_data->ti_emif_sram_data_phys = | 
 | 		gen_pool_virt_to_phys(emif_data->sram_pool_data, | 
 | 				      emif_data->ti_emif_sram_data_virt); | 
 | 	/* | 
 | 	 * These functions are called during suspend path while MMU is | 
 | 	 * still on so add virtual base to offset for absolute address | 
 | 	 */ | 
 | 	emif_data->pm_functions.save_context = | 
 | 		sram_suspend_address(emif_data, | 
 | 				     (unsigned long)ti_emif_save_context); | 
 | 	emif_data->pm_functions.enter_sr = | 
 | 		sram_suspend_address(emif_data, | 
 | 				     (unsigned long)ti_emif_enter_sr); | 
 | 	emif_data->pm_functions.abort_sr = | 
 | 		sram_suspend_address(emif_data, | 
 | 				     (unsigned long)ti_emif_abort_sr); | 
 |  | 
 | 	/* | 
 | 	 * These are called during resume path when MMU is not enabled | 
 | 	 * so physical address is used instead | 
 | 	 */ | 
 | 	emif_data->pm_functions.restore_context = | 
 | 		sram_resume_address(emif_data, | 
 | 				    (unsigned long)ti_emif_restore_context); | 
 | 	emif_data->pm_functions.exit_sr = | 
 | 		sram_resume_address(emif_data, | 
 | 				    (unsigned long)ti_emif_exit_sr); | 
 |  | 
 | 	emif_data->pm_data.regs_virt = | 
 | 		(struct emif_regs_amx3 *)emif_data->ti_emif_sram_data_virt; | 
 | 	emif_data->pm_data.regs_phys = emif_data->ti_emif_sram_data_phys; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_sram_code: | 
 | 	gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt, | 
 | 		      ti_emif_sram_sz); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ti_emif_push_sram(struct device *dev, struct ti_emif_data *emif_data) | 
 | { | 
 | 	void *copy_addr; | 
 | 	u32 data_addr; | 
 |  | 
 | 	copy_addr = sram_exec_copy(emif_data->sram_pool_code, | 
 | 				   (void *)emif_data->ti_emif_sram_virt, | 
 | 				   &ti_emif_sram, ti_emif_sram_sz); | 
 | 	if (!copy_addr) { | 
 | 		dev_err(dev, "Cannot copy emif code to sram\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	data_addr = sram_suspend_address(emif_data, | 
 | 					 (unsigned long)&ti_emif_pm_sram_data); | 
 | 	copy_addr = sram_exec_copy(emif_data->sram_pool_code, | 
 | 				   (void *)data_addr, | 
 | 				   &emif_data->pm_data, | 
 | 				   sizeof(emif_data->pm_data)); | 
 | 	if (!copy_addr) { | 
 | 		dev_err(dev, "Cannot copy emif data to code sram\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Due to Usage Note 3.1.2 "DDR3: JEDEC Compliance for Maximum | 
 |  * Self-Refresh Command Limit" found in AM335x Silicon Errata | 
 |  * (Document SPRZ360F Revised November 2013) we must configure | 
 |  * the self refresh delay timer to 0xA (8192 cycles) to avoid | 
 |  * generating too many refresh command from the EMIF. | 
 |  */ | 
 | static void ti_emif_configure_sr_delay(struct ti_emif_data *emif_data) | 
 | { | 
 | 	writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES, | 
 | 	       (emif_data->pm_data.ti_emif_base_addr_virt + | 
 | 		EMIF_POWER_MANAGEMENT_CONTROL)); | 
 |  | 
 | 	writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES, | 
 | 	       (emif_data->pm_data.ti_emif_base_addr_virt + | 
 | 		EMIF_POWER_MANAGEMENT_CTRL_SHDW)); | 
 | } | 
 |  | 
 | /** | 
 |  * ti_emif_copy_pm_function_table - copy mapping of pm funcs in sram | 
 |  * @sram_pool: pointer to struct gen_pool where dst resides | 
 |  * @dst: void * to address that table should be copied | 
 |  * | 
 |  * Returns 0 if success other error code if table is not available | 
 |  */ | 
 | int ti_emif_copy_pm_function_table(struct gen_pool *sram_pool, void *dst) | 
 | { | 
 | 	void *copy_addr; | 
 |  | 
 | 	if (!emif_instance) | 
 | 		return -ENODEV; | 
 |  | 
 | 	copy_addr = sram_exec_copy(sram_pool, dst, | 
 | 				   &emif_instance->pm_functions, | 
 | 				   sizeof(emif_instance->pm_functions)); | 
 | 	if (!copy_addr) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ti_emif_copy_pm_function_table); | 
 |  | 
 | /** | 
 |  * ti_emif_get_mem_type - return type for memory type in use | 
 |  * | 
 |  * Returns memory type value read from EMIF or error code if fails | 
 |  */ | 
 | int ti_emif_get_mem_type(void) | 
 | { | 
 | 	unsigned long temp; | 
 |  | 
 | 	if (!emif_instance) | 
 | 		return -ENODEV; | 
 |  | 
 | 	temp = readl(emif_instance->pm_data.ti_emif_base_addr_virt + | 
 | 		     EMIF_SDRAM_CONFIG); | 
 |  | 
 | 	temp = (temp & SDRAM_TYPE_MASK) >> SDRAM_TYPE_SHIFT; | 
 | 	return temp; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ti_emif_get_mem_type); | 
 |  | 
 | static const struct of_device_id ti_emif_of_match[] = { | 
 | 	{ .compatible = "ti,emif-am3352", .data = | 
 | 					(void *)EMIF_SRAM_AM33_REG_LAYOUT, }, | 
 | 	{ .compatible = "ti,emif-am4372", .data = | 
 | 					(void *)EMIF_SRAM_AM43_REG_LAYOUT, }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, ti_emif_of_match); | 
 |  | 
 | #ifdef CONFIG_PM_SLEEP | 
 | static int ti_emif_resume(struct device *dev) | 
 | { | 
 | 	unsigned long tmp = | 
 | 			__raw_readl((void *)emif_instance->ti_emif_sram_virt); | 
 |  | 
 | 	/* | 
 | 	 * Check to see if what we are copying is already present in the | 
 | 	 * first byte at the destination, only copy if it is not which | 
 | 	 * indicates we have lost context and sram no longer contains | 
 | 	 * the PM code | 
 | 	 */ | 
 | 	if (tmp != ti_emif_sram) | 
 | 		ti_emif_push_sram(dev, emif_instance); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ti_emif_suspend(struct device *dev) | 
 | { | 
 | 	/* | 
 | 	 * The contents will be present in DDR hence no need to | 
 | 	 * explicitly save | 
 | 	 */ | 
 | 	return 0; | 
 | } | 
 | #endif /* CONFIG_PM_SLEEP */ | 
 |  | 
 | static int ti_emif_probe(struct platform_device *pdev) | 
 | { | 
 | 	int ret; | 
 | 	struct resource *res; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	const struct of_device_id *match; | 
 | 	struct ti_emif_data *emif_data; | 
 |  | 
 | 	emif_data = devm_kzalloc(dev, sizeof(*emif_data), GFP_KERNEL); | 
 | 	if (!emif_data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	match = of_match_device(ti_emif_of_match, &pdev->dev); | 
 | 	if (!match) | 
 | 		return -ENODEV; | 
 |  | 
 | 	emif_data->pm_data.ti_emif_sram_config = (unsigned long)match->data; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	emif_data->pm_data.ti_emif_base_addr_virt = devm_ioremap_resource(dev, | 
 | 									  res); | 
 | 	if (IS_ERR(emif_data->pm_data.ti_emif_base_addr_virt)) { | 
 | 		ret = PTR_ERR(emif_data->pm_data.ti_emif_base_addr_virt); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	emif_data->pm_data.ti_emif_base_addr_phys = res->start; | 
 |  | 
 | 	ti_emif_configure_sr_delay(emif_data); | 
 |  | 
 | 	ret = ti_emif_alloc_sram(dev, emif_data); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = ti_emif_push_sram(dev, emif_data); | 
 | 	if (ret) | 
 | 		goto fail_free_sram; | 
 |  | 
 | 	emif_instance = emif_data; | 
 |  | 
 | 	return 0; | 
 |  | 
 | fail_free_sram: | 
 | 	ti_emif_free_sram(emif_data); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ti_emif_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct ti_emif_data *emif_data = emif_instance; | 
 |  | 
 | 	emif_instance = NULL; | 
 |  | 
 | 	ti_emif_free_sram(emif_data); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dev_pm_ops ti_emif_pm_ops = { | 
 | 	SET_SYSTEM_SLEEP_PM_OPS(ti_emif_suspend, ti_emif_resume) | 
 | }; | 
 |  | 
 | static struct platform_driver ti_emif_driver = { | 
 | 	.probe = ti_emif_probe, | 
 | 	.remove = ti_emif_remove, | 
 | 	.driver = { | 
 | 		.name = KBUILD_MODNAME, | 
 | 		.of_match_table = of_match_ptr(ti_emif_of_match), | 
 | 		.pm = &ti_emif_pm_ops, | 
 | 	}, | 
 | }; | 
 | module_platform_driver(ti_emif_driver); | 
 |  | 
 | MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>"); | 
 | MODULE_DESCRIPTION("Texas Instruments SRAM EMIF driver"); | 
 | MODULE_LICENSE("GPL v2"); |