| /* | 
 |  * PXA910 Power Management Routines | 
 |  * | 
 |  * This software program is licensed subject to the GNU General Public License | 
 |  * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html | 
 |  * | 
 |  * (C) Copyright 2009 Marvell International Ltd. | 
 |  * All Rights Reserved | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/err.h> | 
 | #include <linux/time.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/suspend.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/io.h> | 
 | #include <linux/irq.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/outercache.h> | 
 |  | 
 | #include "cputype.h" | 
 | #include "addr-map.h" | 
 | #include "pm-pxa910.h" | 
 | #include "regs-icu.h" | 
 | #include "irqs.h" | 
 |  | 
 | int pxa910_set_wake(struct irq_data *data, unsigned int on) | 
 | { | 
 | 	uint32_t awucrm = 0, apcr = 0; | 
 | 	int irq = data->irq; | 
 |  | 
 | 	/* setting wakeup sources */ | 
 | 	switch (irq) { | 
 | 	/* wakeup line 2 */ | 
 | 	case IRQ_PXA910_AP_GPIO: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(2); | 
 | 		apcr |= MPMU_APCR_SLPWP2; | 
 | 		break; | 
 | 	/* wakeup line 3 */ | 
 | 	case IRQ_PXA910_KEYPAD: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS; | 
 | 		apcr |= MPMU_APCR_SLPWP3; | 
 | 		break; | 
 | 	case IRQ_PXA910_ROTARY: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY; | 
 | 		apcr |= MPMU_APCR_SLPWP3; | 
 | 		break; | 
 | 	case IRQ_PXA910_TRACKBALL: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL; | 
 | 		apcr |= MPMU_APCR_SLPWP3; | 
 | 		break; | 
 | 	/* wakeup line 4 */ | 
 | 	case IRQ_PXA910_AP1_TIMER1: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	case IRQ_PXA910_AP1_TIMER2: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	case IRQ_PXA910_AP1_TIMER3: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	case IRQ_PXA910_AP2_TIMER1: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	case IRQ_PXA910_AP2_TIMER2: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	case IRQ_PXA910_AP2_TIMER3: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	case IRQ_PXA910_RTC_ALARM: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM; | 
 | 		apcr |= MPMU_APCR_SLPWP4; | 
 | 		break; | 
 | 	/* wakeup line 5 */ | 
 | 	case IRQ_PXA910_USB1: | 
 | 	case IRQ_PXA910_USB2: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(5); | 
 | 		apcr |= MPMU_APCR_SLPWP5; | 
 | 		break; | 
 | 	/* wakeup line 6 */ | 
 | 	case IRQ_PXA910_MMC: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(6) | 
 | 			| MPMU_AWUCRM_SDH1 | 
 | 			| MPMU_AWUCRM_SDH2; | 
 | 		apcr |= MPMU_APCR_SLPWP6; | 
 | 		break; | 
 | 	/* wakeup line 7 */ | 
 | 	case IRQ_PXA910_PMIC_INT: | 
 | 		awucrm = MPMU_AWUCRM_WAKEUP(7); | 
 | 		apcr |= MPMU_APCR_SLPWP7; | 
 | 		break; | 
 | 	default: | 
 | 		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) { | 
 | 			awucrm = MPMU_AWUCRM_WAKEUP(2); | 
 | 			apcr |= MPMU_APCR_SLPWP2; | 
 | 		} else { | 
 | 			/* FIXME: This should return a proper error code ! */ | 
 | 			printk(KERN_ERR "Error: no defined wake up source irq: %d\n", | 
 | 				irq); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (on) { | 
 | 		if (awucrm) { | 
 | 			awucrm |= __raw_readl(MPMU_AWUCRM); | 
 | 			__raw_writel(awucrm, MPMU_AWUCRM); | 
 | 		} | 
 | 		if (apcr) { | 
 | 			apcr = ~apcr & __raw_readl(MPMU_APCR); | 
 | 			__raw_writel(apcr, MPMU_APCR); | 
 | 		} | 
 | 	} else { | 
 | 		if (awucrm) { | 
 | 			awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM); | 
 | 			__raw_writel(awucrm, MPMU_AWUCRM); | 
 | 		} | 
 | 		if (apcr) { | 
 | 			apcr |= __raw_readl(MPMU_APCR); | 
 | 			__raw_writel(apcr, MPMU_APCR); | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | void pxa910_pm_enter_lowpower_mode(int state) | 
 | { | 
 | 	uint32_t idle_cfg, apcr; | 
 |  | 
 | 	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG); | 
 | 	apcr = __raw_readl(MPMU_APCR); | 
 |  | 
 | 	apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD | 
 | 		| MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN); | 
 | 	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE | 
 | 		| APMU_MOH_IDLE_CFG_MOH_PWRDWN); | 
 |  | 
 | 	switch (state) { | 
 | 	case POWER_MODE_UDR: | 
 | 		/* only shutdown APB in UDR */ | 
 | 		apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD; | 
 | 		/* fall through */ | 
 | 	case POWER_MODE_SYS_SLEEP: | 
 | 		apcr |= MPMU_APCR_SLPEN;		/* set the SLPEN bit */ | 
 | 		apcr |= MPMU_APCR_VCTCXOSD;		/* set VCTCXOSD */ | 
 | 		/* fall through */ | 
 | 	case POWER_MODE_APPS_SLEEP: | 
 | 		apcr |= MPMU_APCR_DDRCORSD;		/* set DDRCORSD */ | 
 | 		/* fall through */ | 
 | 	case POWER_MODE_APPS_IDLE: | 
 | 		apcr |= MPMU_APCR_AXISD;		/* set AXISDD bit */ | 
 | 		/* fall through */ | 
 | 	case POWER_MODE_CORE_EXTIDLE: | 
 | 		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE; | 
 | 		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN; | 
 | 		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3) | 
 | 			| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3); | 
 | 		/* fall through */ | 
 | 	case POWER_MODE_CORE_INTIDLE: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* program the memory controller hardware sleep type and auto wakeup */ | 
 | 	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ; | 
 | 	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN; | 
 | 	__raw_writel(0x0, APMU_MC_HW_SLP_TYPE);		/* auto refresh */ | 
 |  | 
 | 	/* set DSPSD, DTCMSD, BBSD, MSASLPEN */ | 
 | 	apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD | 
 | 		| MPMU_APCR_MSASLPEN; | 
 |  | 
 | 	/*always set SLEPEN bit mainly for MSA*/ | 
 | 	apcr |= MPMU_APCR_SLPEN; | 
 |  | 
 | 	/* finally write the registers back */ | 
 | 	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG); | 
 | 	__raw_writel(apcr, MPMU_APCR); | 
 |  | 
 | } | 
 |  | 
 | static int pxa910_pm_enter(suspend_state_t state) | 
 | { | 
 | 	unsigned int idle_cfg, reg = 0; | 
 |  | 
 | 	/*pmic thread not completed,exit;otherwise system can't be waked up*/ | 
 | 	reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT)); | 
 | 	if ((reg & 0x3) == 0) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG); | 
 | 	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN | 
 | 		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN; | 
 | 	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG); | 
 |  | 
 | 	/* disable L2 */ | 
 | 	outer_disable(); | 
 | 	/* wait for l2 idle */ | 
 | 	while (!(readl(CIU_REG(0x8)) & (1 << 16))) | 
 | 		udelay(1); | 
 |  | 
 | 	cpu_do_idle(); | 
 |  | 
 | 	/* enable L2 */ | 
 | 	outer_resume(); | 
 | 	/* wait for l2 idle */ | 
 | 	while (!(readl(CIU_REG(0x8)) & (1 << 16))) | 
 | 		udelay(1); | 
 |  | 
 | 	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG); | 
 | 	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN | 
 | 		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN); | 
 | 	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Called after processes are frozen, but before we shut down devices. | 
 |  */ | 
 | static int pxa910_pm_prepare(void) | 
 | { | 
 | 	pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Called after devices are re-setup, but before processes are thawed. | 
 |  */ | 
 | static void pxa910_pm_finish(void) | 
 | { | 
 | 	pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE); | 
 | } | 
 |  | 
 | static int pxa910_pm_valid(suspend_state_t state) | 
 | { | 
 | 	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM)); | 
 | } | 
 |  | 
 | static const struct platform_suspend_ops pxa910_pm_ops = { | 
 | 	.valid		= pxa910_pm_valid, | 
 | 	.prepare	= pxa910_pm_prepare, | 
 | 	.enter		= pxa910_pm_enter, | 
 | 	.finish		= pxa910_pm_finish, | 
 | }; | 
 |  | 
 | static int __init pxa910_pm_init(void) | 
 | { | 
 | 	uint32_t awucrm = 0; | 
 |  | 
 | 	if (!cpu_is_pxa910()) | 
 | 		return -EIO; | 
 |  | 
 | 	suspend_set_ops(&pxa910_pm_ops); | 
 |  | 
 | 	/* Set the following bits for MMP3 playback with VCTXO on */ | 
 | 	__raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30), | 
 | 		APMU_SQU_CLK_GATE_CTRL); | 
 | 	__raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR); | 
 |  | 
 | 	awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE; | 
 | 	__raw_writel(awucrm, MPMU_AWUCRM); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | late_initcall(pxa910_pm_init); |