src/kernel/linux/v4.19/drivers/clk/clk-si544.c - T800 - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Silicon Labs Si544 Programmable Oscillator
  * Copyright (C) 2018 Topic Embedded Products
  * Author: Mike Looijmans <mike.looijmans@topic.nl>
  */

 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>

 /* I2C registers (decimal as in datasheet) */
 #define SI544_REG_CONTROL	7
 #define SI544_REG_OE_STATE	17
 #define SI544_REG_HS_DIV	23
 #define SI544_REG_LS_HS_DIV	24
 #define SI544_REG_FBDIV0	26
 #define SI544_REG_FBDIV8	27
 #define SI544_REG_FBDIV16	28
 #define SI544_REG_FBDIV24	29
 #define SI544_REG_FBDIV32	30
 #define SI544_REG_FBDIV40	31
 #define SI544_REG_FCAL_OVR	69
 #define SI544_REG_ADPLL_DELTA_M0	231
 #define SI544_REG_ADPLL_DELTA_M8	232
 #define SI544_REG_ADPLL_DELTA_M16	233
 #define SI544_REG_PAGE_SELECT	255

 /* Register values */
 #define SI544_CONTROL_RESET	BIT(7)
 #define SI544_CONTROL_MS_ICAL2	BIT(3)

 #define SI544_OE_STATE_ODC_OE	BIT(0)

 /* Max freq depends on speed grade */
 #define SI544_MIN_FREQ	    200000U

 /* Si544 Internal oscilator runs at 55.05 MHz */
 #define FXO		  55050000U

 /* VCO range is 10.8 .. 12.1 GHz, max depends on speed grade */
 #define FVCO_MIN       10800000000ULL

 #define HS_DIV_MAX	2046
 #define HS_DIV_MAX_ODD	33

 /* Lowest frequency synthesizeable using only the HS divider */
 #define MIN_HSDIV_FREQ	(FVCO_MIN / HS_DIV_MAX)

 enum si544_speed_grade {
 	si544a,
 	si544b,
 	si544c,
 };

 struct clk_si544 {
 	struct clk_hw hw;
 	struct regmap *regmap;
 	struct i2c_client *i2c_client;
 	enum si544_speed_grade speed_grade;
 };
 #define to_clk_si544(_hw)	container_of(_hw, struct clk_si544, hw)

 /**
  * struct clk_si544_muldiv - Multiplier/divider settings
  * @fb_div_frac:	integer part of feedback divider (32 bits)
  * @fb_div_int:		fractional part of feedback divider (11 bits)
  * @hs_div:		1st divider, 5..2046, must be even when >33
  * @ls_div_bits:	2nd divider, as 2^x, range 0..5
  *                      If ls_div_bits is non-zero, hs_div must be even
  */
 struct clk_si544_muldiv {
 	u32 fb_div_frac;
 	u16 fb_div_int;
 	u16 hs_div;
 	u8 ls_div_bits;
 };

 /* Enables or disables the output driver */
 static int si544_enable_output(struct clk_si544 *data, bool enable)
 {
 	return regmap_update_bits(data->regmap, SI544_REG_OE_STATE,
 		SI544_OE_STATE_ODC_OE, enable ? SI544_OE_STATE_ODC_OE : 0);
 }

 static int si544_prepare(struct clk_hw *hw)
 {
 	struct clk_si544 *data = to_clk_si544(hw);

 	return si544_enable_output(data, true);
 }

 static void si544_unprepare(struct clk_hw *hw)
 {
 	struct clk_si544 *data = to_clk_si544(hw);

 	si544_enable_output(data, false);
 }

 static int si544_is_prepared(struct clk_hw *hw)
 {
 	struct clk_si544 *data = to_clk_si544(hw);
 	unsigned int val;
 	int err;

 	err = regmap_read(data->regmap, SI544_REG_OE_STATE, &val);
 	if (err < 0)
 		return err;

 	return !!(val & SI544_OE_STATE_ODC_OE);
 }

 /* Retrieve clock multiplier and dividers from hardware */
 static int si544_get_muldiv(struct clk_si544 *data,
 	struct clk_si544_muldiv *settings)
 {
 	int err;
 	u8 reg[6];

 	err = regmap_bulk_read(data->regmap, SI544_REG_HS_DIV, reg, 2);
 	if (err)
 		return err;

 	settings->ls_div_bits = (reg[1] >> 4) & 0x07;
 	settings->hs_div = (reg[1] & 0x07) << 8 | reg[0];

 	err = regmap_bulk_read(data->regmap, SI544_REG_FBDIV0, reg, 6);
 	if (err)
 		return err;

 	settings->fb_div_int = reg[4] | (reg[5] & 0x07) << 8;
 	settings->fb_div_frac = reg[0] | reg[1] << 8 | reg[2] << 16 |
 				reg[3] << 24;
 	return 0;
 }

 static int si544_set_muldiv(struct clk_si544 *data,
 	struct clk_si544_muldiv *settings)
 {
 	int err;
 	u8 reg[6];

 	reg[0] = settings->hs_div;
 	reg[1] = settings->hs_div >> 8 | settings->ls_div_bits << 4;

 	err = regmap_bulk_write(data->regmap, SI544_REG_HS_DIV, reg, 2);
 	if (err < 0)
 		return err;

 	reg[0] = settings->fb_div_frac;
 	reg[1] = settings->fb_div_frac >> 8;
 	reg[2] = settings->fb_div_frac >> 16;
 	reg[3] = settings->fb_div_frac >> 24;
 	reg[4] = settings->fb_div_int;
 	reg[5] = settings->fb_div_int >> 8;

 	/*
 	 * Writing to SI544_REG_FBDIV40 triggers the clock change, so that
 	 * must be written last
 	 */
 	return regmap_bulk_write(data->regmap, SI544_REG_FBDIV0, reg, 6);
 }

 static bool is_valid_frequency(const struct clk_si544 *data,
 	unsigned long frequency)
 {
 	unsigned long max_freq = 0;

 	if (frequency < SI544_MIN_FREQ)
 		return false;

 	switch (data->speed_grade) {
 	case si544a:
 		max_freq = 1500000000;
 		break;
 	case si544b:
 		max_freq = 800000000;
 		break;
 	case si544c:
 		max_freq = 350000000;
 		break;
 	}

 	return frequency <= max_freq;
 }

 /* Calculate divider settings for a given frequency */
 static int si544_calc_muldiv(struct clk_si544_muldiv *settings,
 	unsigned long frequency)
 {
 	u64 vco;
 	u32 ls_freq;
 	u32 tmp;
 	u8 res;

 	/* Determine the minimum value of LS_DIV and resulting target freq. */
 	ls_freq = frequency;
 	settings->ls_div_bits = 0;

 	if (frequency >= MIN_HSDIV_FREQ) {
 		settings->ls_div_bits = 0;
 	} else {
 		res = 1;
 		tmp = 2 * HS_DIV_MAX;
 		while (tmp <= (HS_DIV_MAX * 32)) {
 			if (((u64)frequency * tmp) >= FVCO_MIN)
 				break;
 			++res;
 			tmp <<= 1;
 		}
 		settings->ls_div_bits = res;
 		ls_freq = frequency << res;
 	}

 	/* Determine minimum HS_DIV by rounding up */
 	vco = FVCO_MIN + ls_freq - 1;
 	do_div(vco, ls_freq);
 	settings->hs_div = vco;

 	/* round up to even number when required */
 	if ((settings->hs_div & 1) &&
 	    (settings->hs_div > HS_DIV_MAX_ODD || settings->ls_div_bits))
 		++settings->hs_div;

 	/* Calculate VCO frequency (in 10..12GHz range) */
 	vco = (u64)ls_freq * settings->hs_div;

 	/* Calculate the integer part of the feedback divider */
 	tmp = do_div(vco, FXO);
 	settings->fb_div_int = vco;

 	/* And the fractional bits using the remainder */
 	vco = (u64)tmp << 32;
 	vco += FXO / 2; /* Round to nearest multiple */
 	do_div(vco, FXO);
 	settings->fb_div_frac = vco;

 	return 0;
 }

 /* Calculate resulting frequency given the register settings */
 static unsigned long si544_calc_rate(struct clk_si544_muldiv *settings)
 {
 	u32 d = settings->hs_div * BIT(settings->ls_div_bits);
 	u64 vco;

 	/* Calculate VCO from the fractional part */
 	vco = (u64)settings->fb_div_frac * FXO;
 	vco += (FXO / 2);
 	vco >>= 32;

 	/* Add the integer part of the VCO frequency */
 	vco += (u64)settings->fb_div_int * FXO;

 	/* Apply divider to obtain the generated frequency */
 	do_div(vco, d);

 	return vco;
 }

 static unsigned long si544_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
 	struct clk_si544 *data = to_clk_si544(hw);
 	struct clk_si544_muldiv settings;
 	int err;

 	err = si544_get_muldiv(data, &settings);
 	if (err)
 		return 0;

 	return si544_calc_rate(&settings);
 }

 static long si544_round_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long *parent_rate)
 {
 	struct clk_si544 *data = to_clk_si544(hw);
 	struct clk_si544_muldiv settings;
 	int err;

 	if (!is_valid_frequency(data, rate))
 		return -EINVAL;

 	err = si544_calc_muldiv(&settings, rate);
 	if (err)
 		return err;

 	return si544_calc_rate(&settings);
 }

 /*
  * Update output frequency for "big" frequency changes
  */
 static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long parent_rate)
 {
 	struct clk_si544 *data = to_clk_si544(hw);
 	struct clk_si544_muldiv settings;
 	unsigned int old_oe_state;
 	int err;

 	if (!is_valid_frequency(data, rate))
 		return -EINVAL;

 	err = si544_calc_muldiv(&settings, rate);
 	if (err)
 		return err;

 	err = regmap_read(data->regmap, SI544_REG_OE_STATE, &old_oe_state);
 	if (err)
 		return err;

 	si544_enable_output(data, false);

 	/* Allow FCAL for this frequency update */
 	err = regmap_write(data->regmap, SI544_REG_FCAL_OVR, 0);
 	if (err < 0)
 		return err;


 	err = si544_set_muldiv(data, &settings);
 	if (err < 0)
 		return err; /* Undefined state now, best to leave disabled */

 	/* Trigger calibration */
 	err = regmap_write(data->regmap, SI544_REG_CONTROL,
 			   SI544_CONTROL_MS_ICAL2);
 	if (err < 0)
 		return err;

 	/* Applying a new frequency can take up to 10ms */
 	usleep_range(10000, 12000);

 	if (old_oe_state & SI544_OE_STATE_ODC_OE)
 		si544_enable_output(data, true);

 	return err;
 }

 static const struct clk_ops si544_clk_ops = {
 	.prepare = si544_prepare,
 	.unprepare = si544_unprepare,
 	.is_prepared = si544_is_prepared,
 	.recalc_rate = si544_recalc_rate,
 	.round_rate = si544_round_rate,
 	.set_rate = si544_set_rate,
 };

 static bool si544_regmap_is_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case SI544_REG_CONTROL:
 	case SI544_REG_FCAL_OVR:
 		return true;
 	default:
 		return false;
 	}
 }

 static const struct regmap_config si544_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.cache_type = REGCACHE_RBTREE,
 	.max_register = SI544_REG_PAGE_SELECT,
 	.volatile_reg = si544_regmap_is_volatile,
 };

 static int si544_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
 	struct clk_si544 *data;
 	struct clk_init_data init;
 	int err;

 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;

 	init.ops = &si544_clk_ops;
 	init.flags = 0;
 	init.num_parents = 0;
 	data->hw.init = &init;
 	data->i2c_client = client;
 	data->speed_grade = id->driver_data;

 	if (of_property_read_string(client->dev.of_node, "clock-output-names",
 			&init.name))
 		init.name = client->dev.of_node->name;

 	data->regmap = devm_regmap_init_i2c(client, &si544_regmap_config);
 	if (IS_ERR(data->regmap))
 		return PTR_ERR(data->regmap);

 	i2c_set_clientdata(client, data);

 	/* Select page 0, just to be sure, there appear to be no more */
 	err = regmap_write(data->regmap, SI544_REG_PAGE_SELECT, 0);
 	if (err < 0)
 		return err;

 	err = devm_clk_hw_register(&client->dev, &data->hw);
 	if (err) {
 		dev_err(&client->dev, "clock registration failed\n");
 		return err;
 	}
 	err = devm_of_clk_add_hw_provider(&client->dev, of_clk_hw_simple_get,
 					  &data->hw);
 	if (err) {
 		dev_err(&client->dev, "unable to add clk provider\n");
 		return err;
 	}

 	return 0;
 }

 static const struct i2c_device_id si544_id[] = {
 	{ "si544a", si544a },
 	{ "si544b", si544b },
 	{ "si544c", si544c },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, si544_id);

 static const struct of_device_id clk_si544_of_match[] = {
 	{ .compatible = "silabs,si544a" },
 	{ .compatible = "silabs,si544b" },
 	{ .compatible = "silabs,si544c" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, clk_si544_of_match);

 static struct i2c_driver si544_driver = {
 	.driver = {
 		.name = "si544",
 		.of_match_table = clk_si544_of_match,
 	},
 	.probe		= si544_probe,
 	.id_table	= si544_id,
 };
 module_i2c_driver(si544_driver);

 MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
 MODULE_DESCRIPTION("Si544 driver");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Driver for Silicon Labs Si544 Programmable Oscillator
	* Copyright (C) 2018 Topic Embedded Products
	* Author: Mike Looijmans <mike.looijmans@topic.nl>
	*/

	#include <linux/clk-provider.h>
	#include <linux/delay.h>
	#include <linux/module.h>
	#include <linux/i2c.h>
	#include <linux/regmap.h>
	#include <linux/slab.h>

	/* I2C registers (decimal as in datasheet) */
	#define SI544_REG_CONTROL 7
	#define SI544_REG_OE_STATE 17
	#define SI544_REG_HS_DIV 23
	#define SI544_REG_LS_HS_DIV 24
	#define SI544_REG_FBDIV0 26
	#define SI544_REG_FBDIV8 27
	#define SI544_REG_FBDIV16 28
	#define SI544_REG_FBDIV24 29
	#define SI544_REG_FBDIV32 30
	#define SI544_REG_FBDIV40 31
	#define SI544_REG_FCAL_OVR 69
	#define SI544_REG_ADPLL_DELTA_M0 231
	#define SI544_REG_ADPLL_DELTA_M8 232
	#define SI544_REG_ADPLL_DELTA_M16 233
	#define SI544_REG_PAGE_SELECT 255

	/* Register values */
	#define SI544_CONTROL_RESET BIT(7)
	#define SI544_CONTROL_MS_ICAL2 BIT(3)

	#define SI544_OE_STATE_ODC_OE BIT(0)

	/* Max freq depends on speed grade */
	#define SI544_MIN_FREQ 200000U

	/* Si544 Internal oscilator runs at 55.05 MHz */
	#define FXO 55050000U

	/* VCO range is 10.8 .. 12.1 GHz, max depends on speed grade */
	#define FVCO_MIN 10800000000ULL

	#define HS_DIV_MAX 2046
	#define HS_DIV_MAX_ODD 33

	/* Lowest frequency synthesizeable using only the HS divider */
	#define MIN_HSDIV_FREQ (FVCO_MIN / HS_DIV_MAX)

	enum si544_speed_grade {
	si544a,
	si544b,
	si544c,
	};

	struct clk_si544 {
	struct clk_hw hw;
	struct regmap *regmap;
	struct i2c_client *i2c_client;
	enum si544_speed_grade speed_grade;
	};
	#define to_clk_si544(_hw) container_of(_hw, struct clk_si544, hw)

	/**
	* struct clk_si544_muldiv - Multiplier/divider settings
	* @fb_div_frac: integer part of feedback divider (32 bits)
	* @fb_div_int: fractional part of feedback divider (11 bits)
	* @hs_div: 1st divider, 5..2046, must be even when >33
	* @ls_div_bits: 2nd divider, as 2^x, range 0..5
	* If ls_div_bits is non-zero, hs_div must be even
	*/
	struct clk_si544_muldiv {
	u32 fb_div_frac;
	u16 fb_div_int;
	u16 hs_div;
	u8 ls_div_bits;
	};

	/* Enables or disables the output driver */
	static int si544_enable_output(struct clk_si544 *data, bool enable)
	{
	return regmap_update_bits(data->regmap, SI544_REG_OE_STATE,
	SI544_OE_STATE_ODC_OE, enable ? SI544_OE_STATE_ODC_OE : 0);
	}

	static int si544_prepare(struct clk_hw *hw)
	{
	struct clk_si544 *data = to_clk_si544(hw);

	return si544_enable_output(data, true);
	}

	static void si544_unprepare(struct clk_hw *hw)
	{
	struct clk_si544 *data = to_clk_si544(hw);

	si544_enable_output(data, false);
	}

	static int si544_is_prepared(struct clk_hw *hw)
	{
	struct clk_si544 *data = to_clk_si544(hw);
	unsigned int val;
	int err;

	err = regmap_read(data->regmap, SI544_REG_OE_STATE, &val);
	if (err < 0)
	return err;

	return !!(val & SI544_OE_STATE_ODC_OE);
	}

	/* Retrieve clock multiplier and dividers from hardware */
	static int si544_get_muldiv(struct clk_si544 *data,
	struct clk_si544_muldiv *settings)
	{
	int err;
	u8 reg[6];

	err = regmap_bulk_read(data->regmap, SI544_REG_HS_DIV, reg, 2);
	if (err)
	return err;

	settings->ls_div_bits = (reg[1] >> 4) & 0x07;
	settings->hs_div = (reg[1] & 0x07) << 8 \| reg[0];

	err = regmap_bulk_read(data->regmap, SI544_REG_FBDIV0, reg, 6);
	if (err)
	return err;

	settings->fb_div_int = reg[4] \| (reg[5] & 0x07) << 8;
	settings->fb_div_frac = reg[0] \| reg[1] << 8 \| reg[2] << 16 \|
	reg[3] << 24;
	return 0;
	}

	static int si544_set_muldiv(struct clk_si544 *data,
	struct clk_si544_muldiv *settings)
	{
	int err;
	u8 reg[6];

	reg[0] = settings->hs_div;
	reg[1] = settings->hs_div >> 8 \| settings->ls_div_bits << 4;

	err = regmap_bulk_write(data->regmap, SI544_REG_HS_DIV, reg, 2);
	if (err < 0)
	return err;

	reg[0] = settings->fb_div_frac;
	reg[1] = settings->fb_div_frac >> 8;
	reg[2] = settings->fb_div_frac >> 16;
	reg[3] = settings->fb_div_frac >> 24;
	reg[4] = settings->fb_div_int;
	reg[5] = settings->fb_div_int >> 8;

	/*
	* Writing to SI544_REG_FBDIV40 triggers the clock change, so that
	* must be written last
	*/
	return regmap_bulk_write(data->regmap, SI544_REG_FBDIV0, reg, 6);
	}

	static bool is_valid_frequency(const struct clk_si544 *data,
	unsigned long frequency)
	{
	unsigned long max_freq = 0;

	if (frequency < SI544_MIN_FREQ)
	return false;

	switch (data->speed_grade) {
	case si544a:
	max_freq = 1500000000;
	break;
	case si544b:
	max_freq = 800000000;
	break;
	case si544c:
	max_freq = 350000000;
	break;
	}

	return frequency <= max_freq;
	}

	/* Calculate divider settings for a given frequency */
	static int si544_calc_muldiv(struct clk_si544_muldiv *settings,
	unsigned long frequency)
	{
	u64 vco;
	u32 ls_freq;
	u32 tmp;
	u8 res;

	/* Determine the minimum value of LS_DIV and resulting target freq. */
	ls_freq = frequency;
	settings->ls_div_bits = 0;

	if (frequency >= MIN_HSDIV_FREQ) {
	settings->ls_div_bits = 0;
	} else {
	res = 1;
	tmp = 2 * HS_DIV_MAX;
	while (tmp <= (HS_DIV_MAX * 32)) {
	if (((u64)frequency * tmp) >= FVCO_MIN)
	break;
	++res;
	tmp <<= 1;
	}
	settings->ls_div_bits = res;
	ls_freq = frequency << res;
	}

	/* Determine minimum HS_DIV by rounding up */
	vco = FVCO_MIN + ls_freq - 1;
	do_div(vco, ls_freq);
	settings->hs_div = vco;

	/* round up to even number when required */
	if ((settings->hs_div & 1) &&
	(settings->hs_div > HS_DIV_MAX_ODD \|\| settings->ls_div_bits))
	++settings->hs_div;

	/* Calculate VCO frequency (in 10..12GHz range) */
	vco = (u64)ls_freq * settings->hs_div;

	/* Calculate the integer part of the feedback divider */
	tmp = do_div(vco, FXO);
	settings->fb_div_int = vco;

	/* And the fractional bits using the remainder */
	vco = (u64)tmp << 32;
	vco += FXO / 2; /* Round to nearest multiple */
	do_div(vco, FXO);
	settings->fb_div_frac = vco;

	return 0;
	}

	/* Calculate resulting frequency given the register settings */
	static unsigned long si544_calc_rate(struct clk_si544_muldiv *settings)
	{
	u32 d = settings->hs_div * BIT(settings->ls_div_bits);
	u64 vco;

	/* Calculate VCO from the fractional part */
	vco = (u64)settings->fb_div_frac * FXO;
	vco += (FXO / 2);
	vco >>= 32;

	/* Add the integer part of the VCO frequency */
	vco += (u64)settings->fb_div_int * FXO;

	/* Apply divider to obtain the generated frequency */
	do_div(vco, d);

	return vco;
	}

	static unsigned long si544_recalc_rate(struct clk_hw *hw,
	unsigned long parent_rate)
	{
	struct clk_si544 *data = to_clk_si544(hw);
	struct clk_si544_muldiv settings;
	int err;

	err = si544_get_muldiv(data, &settings);
	if (err)
	return 0;

	return si544_calc_rate(&settings);
	}

	static long si544_round_rate(struct clk_hw *hw, unsigned long rate,
	unsigned long *parent_rate)
	{
	struct clk_si544 *data = to_clk_si544(hw);
	struct clk_si544_muldiv settings;
	int err;

	if (!is_valid_frequency(data, rate))
	return -EINVAL;

	err = si544_calc_muldiv(&settings, rate);
	if (err)
	return err;

	return si544_calc_rate(&settings);
	}

	/*
	* Update output frequency for "big" frequency changes
	*/
	static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
	unsigned long parent_rate)
	{
	struct clk_si544 *data = to_clk_si544(hw);
	struct clk_si544_muldiv settings;
	unsigned int old_oe_state;
	int err;

	if (!is_valid_frequency(data, rate))
	return -EINVAL;

	err = si544_calc_muldiv(&settings, rate);
	if (err)
	return err;

	err = regmap_read(data->regmap, SI544_REG_OE_STATE, &old_oe_state);
	if (err)
	return err;

	si544_enable_output(data, false);

	/* Allow FCAL for this frequency update */
	err = regmap_write(data->regmap, SI544_REG_FCAL_OVR, 0);
	if (err < 0)
	return err;


	err = si544_set_muldiv(data, &settings);
	if (err < 0)
	return err; /* Undefined state now, best to leave disabled */

	/* Trigger calibration */
	err = regmap_write(data->regmap, SI544_REG_CONTROL,
	SI544_CONTROL_MS_ICAL2);
	if (err < 0)
	return err;

	/* Applying a new frequency can take up to 10ms */
	usleep_range(10000, 12000);

	if (old_oe_state & SI544_OE_STATE_ODC_OE)
	si544_enable_output(data, true);

	return err;
	}

	static const struct clk_ops si544_clk_ops = {
	.prepare = si544_prepare,
	.unprepare = si544_unprepare,
	.is_prepared = si544_is_prepared,
	.recalc_rate = si544_recalc_rate,
	.round_rate = si544_round_rate,
	.set_rate = si544_set_rate,
	};

	static bool si544_regmap_is_volatile(struct device *dev, unsigned int reg)
	{
	switch (reg) {
	case SI544_REG_CONTROL:
	case SI544_REG_FCAL_OVR:
	return true;
	default:
	return false;
	}
	}

	static const struct regmap_config si544_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.cache_type = REGCACHE_RBTREE,
	.max_register = SI544_REG_PAGE_SELECT,
	.volatile_reg = si544_regmap_is_volatile,
	};

	static int si544_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	struct clk_si544 *data;
	struct clk_init_data init;
	int err;

	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
	if (!data)
	return -ENOMEM;

	init.ops = &si544_clk_ops;
	init.flags = 0;
	init.num_parents = 0;
	data->hw.init = &init;
	data->i2c_client = client;
	data->speed_grade = id->driver_data;

	if (of_property_read_string(client->dev.of_node, "clock-output-names",
	&init.name))
	init.name = client->dev.of_node->name;

	data->regmap = devm_regmap_init_i2c(client, &si544_regmap_config);
	if (IS_ERR(data->regmap))
	return PTR_ERR(data->regmap);

	i2c_set_clientdata(client, data);

	/* Select page 0, just to be sure, there appear to be no more */
	err = regmap_write(data->regmap, SI544_REG_PAGE_SELECT, 0);
	if (err < 0)
	return err;

	err = devm_clk_hw_register(&client->dev, &data->hw);
	if (err) {
	dev_err(&client->dev, "clock registration failed\n");
	return err;
	}
	err = devm_of_clk_add_hw_provider(&client->dev, of_clk_hw_simple_get,
	&data->hw);
	if (err) {
	dev_err(&client->dev, "unable to add clk provider\n");
	return err;
	}

	return 0;
	}

	static const struct i2c_device_id si544_id[] = {
	{ "si544a", si544a },
	{ "si544b", si544b },
	{ "si544c", si544c },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, si544_id);

	static const struct of_device_id clk_si544_of_match[] = {
	{ .compatible = "silabs,si544a" },
	{ .compatible = "silabs,si544b" },
	{ .compatible = "silabs,si544c" },
	{ },
	};
	MODULE_DEVICE_TABLE(of, clk_si544_of_match);

	static struct i2c_driver si544_driver = {
	.driver = {
	.name = "si544",
	.of_match_table = clk_si544_of_match,
	},
	.probe = si544_probe,
	.id_table = si544_id,
	};
	module_i2c_driver(si544_driver);

	MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
	MODULE_DESCRIPTION("Si544 driver");
	MODULE_LICENSE("GPL");