| /* | 
 |  * GPIO based serio bus driver for bit banging the PS/2 protocol | 
 |  * | 
 |  * Author: Danilo Krummrich <danilokrummrich@dk-develop.de> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/module.h> | 
 | #include <linux/serio.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/completion.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/preempt.h> | 
 | #include <linux/property.h> | 
 | #include <linux/of.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #define DRIVER_NAME		"ps2-gpio" | 
 |  | 
 | #define PS2_MODE_RX		0 | 
 | #define PS2_MODE_TX		1 | 
 |  | 
 | #define PS2_START_BIT		0 | 
 | #define PS2_DATA_BIT0		1 | 
 | #define PS2_DATA_BIT1		2 | 
 | #define PS2_DATA_BIT2		3 | 
 | #define PS2_DATA_BIT3		4 | 
 | #define PS2_DATA_BIT4		5 | 
 | #define PS2_DATA_BIT5		6 | 
 | #define PS2_DATA_BIT6		7 | 
 | #define PS2_DATA_BIT7		8 | 
 | #define PS2_PARITY_BIT		9 | 
 | #define PS2_STOP_BIT		10 | 
 | #define PS2_TX_TIMEOUT		11 | 
 | #define PS2_ACK_BIT		12 | 
 |  | 
 | #define PS2_DEV_RET_ACK		0xfa | 
 | #define PS2_DEV_RET_NACK	0xfe | 
 |  | 
 | #define PS2_CMD_RESEND		0xfe | 
 |  | 
 | struct ps2_gpio_data { | 
 | 	struct device *dev; | 
 | 	struct serio *serio; | 
 | 	unsigned char mode; | 
 | 	struct gpio_desc *gpio_clk; | 
 | 	struct gpio_desc *gpio_data; | 
 | 	bool write_enable; | 
 | 	int irq; | 
 | 	unsigned char rx_cnt; | 
 | 	unsigned char rx_byte; | 
 | 	unsigned char tx_cnt; | 
 | 	unsigned char tx_byte; | 
 | 	struct completion tx_done; | 
 | 	struct mutex tx_mutex; | 
 | 	struct delayed_work tx_work; | 
 | }; | 
 |  | 
 | static int ps2_gpio_open(struct serio *serio) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata = serio->port_data; | 
 |  | 
 | 	enable_irq(drvdata->irq); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ps2_gpio_close(struct serio *serio) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata = serio->port_data; | 
 |  | 
 | 	flush_delayed_work(&drvdata->tx_work); | 
 | 	disable_irq(drvdata->irq); | 
 | } | 
 |  | 
 | static int __ps2_gpio_write(struct serio *serio, unsigned char val) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata = serio->port_data; | 
 |  | 
 | 	disable_irq_nosync(drvdata->irq); | 
 | 	gpiod_direction_output(drvdata->gpio_clk, 0); | 
 |  | 
 | 	drvdata->mode = PS2_MODE_TX; | 
 | 	drvdata->tx_byte = val; | 
 |  | 
 | 	schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ps2_gpio_write(struct serio *serio, unsigned char val) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata = serio->port_data; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (in_task()) { | 
 | 		mutex_lock(&drvdata->tx_mutex); | 
 | 		__ps2_gpio_write(serio, val); | 
 | 		if (!wait_for_completion_timeout(&drvdata->tx_done, | 
 | 						 msecs_to_jiffies(10000))) | 
 | 			ret = SERIO_TIMEOUT; | 
 | 		mutex_unlock(&drvdata->tx_mutex); | 
 | 	} else { | 
 | 		__ps2_gpio_write(serio, val); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void ps2_gpio_tx_work_fn(struct work_struct *work) | 
 | { | 
 | 	struct delayed_work *dwork = to_delayed_work(work); | 
 | 	struct ps2_gpio_data *drvdata = container_of(dwork, | 
 | 						    struct ps2_gpio_data, | 
 | 						    tx_work); | 
 |  | 
 | 	enable_irq(drvdata->irq); | 
 | 	gpiod_direction_output(drvdata->gpio_data, 0); | 
 | 	gpiod_direction_input(drvdata->gpio_clk); | 
 | } | 
 |  | 
 | static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) | 
 | { | 
 | 	unsigned char byte, cnt; | 
 | 	int data; | 
 | 	int rxflags = 0; | 
 | 	static unsigned long old_jiffies; | 
 |  | 
 | 	byte = drvdata->rx_byte; | 
 | 	cnt = drvdata->rx_cnt; | 
 |  | 
 | 	if (old_jiffies == 0) | 
 | 		old_jiffies = jiffies; | 
 |  | 
 | 	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { | 
 | 		dev_err(drvdata->dev, | 
 | 			"RX: timeout, probably we missed an interrupt\n"); | 
 | 		goto err; | 
 | 	} | 
 | 	old_jiffies = jiffies; | 
 |  | 
 | 	data = gpiod_get_value(drvdata->gpio_data); | 
 | 	if (unlikely(data < 0)) { | 
 | 		dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n", | 
 | 			data); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	switch (cnt) { | 
 | 	case PS2_START_BIT: | 
 | 		/* start bit should be low */ | 
 | 		if (unlikely(data)) { | 
 | 			dev_err(drvdata->dev, "RX: start bit should be low\n"); | 
 | 			goto err; | 
 | 		} | 
 | 		break; | 
 | 	case PS2_DATA_BIT0: | 
 | 	case PS2_DATA_BIT1: | 
 | 	case PS2_DATA_BIT2: | 
 | 	case PS2_DATA_BIT3: | 
 | 	case PS2_DATA_BIT4: | 
 | 	case PS2_DATA_BIT5: | 
 | 	case PS2_DATA_BIT6: | 
 | 	case PS2_DATA_BIT7: | 
 | 		/* processing data bits */ | 
 | 		if (data) | 
 | 			byte |= (data << (cnt - 1)); | 
 | 		break; | 
 | 	case PS2_PARITY_BIT: | 
 | 		/* check odd parity */ | 
 | 		if (!((hweight8(byte) & 1) ^ data)) { | 
 | 			rxflags |= SERIO_PARITY; | 
 | 			dev_warn(drvdata->dev, "RX: parity error\n"); | 
 | 			if (!drvdata->write_enable) | 
 | 				goto err; | 
 | 		} | 
 |  | 
 | 		/* Do not send spurious ACK's and NACK's when write fn is | 
 | 		 * not provided. | 
 | 		 */ | 
 | 		if (!drvdata->write_enable) { | 
 | 			if (byte == PS2_DEV_RET_NACK) | 
 | 				goto err; | 
 | 			else if (byte == PS2_DEV_RET_ACK) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		/* Let's send the data without waiting for the stop bit to be | 
 | 		 * sent. It may happen that we miss the stop bit. When this | 
 | 		 * happens we have no way to recover from this, certainly | 
 | 		 * missing the parity bit would be recognized when processing | 
 | 		 * the stop bit. When missing both, data is lost. | 
 | 		 */ | 
 | 		serio_interrupt(drvdata->serio, byte, rxflags); | 
 | 		dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte); | 
 | 		break; | 
 | 	case PS2_STOP_BIT: | 
 | 		/* stop bit should be high */ | 
 | 		if (unlikely(!data)) { | 
 | 			dev_err(drvdata->dev, "RX: stop bit should be high\n"); | 
 | 			goto err; | 
 | 		} | 
 | 		cnt = byte = 0; | 
 | 		old_jiffies = 0; | 
 | 		goto end; /* success */ | 
 | 	default: | 
 | 		dev_err(drvdata->dev, "RX: got out of sync with the device\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	cnt++; | 
 | 	goto end; /* success */ | 
 |  | 
 | err: | 
 | 	cnt = byte = 0; | 
 | 	old_jiffies = 0; | 
 | 	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND); | 
 | end: | 
 | 	drvdata->rx_cnt = cnt; | 
 | 	drvdata->rx_byte = byte; | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) | 
 | { | 
 | 	unsigned char byte, cnt; | 
 | 	int data; | 
 | 	static unsigned long old_jiffies; | 
 |  | 
 | 	cnt = drvdata->tx_cnt; | 
 | 	byte = drvdata->tx_byte; | 
 |  | 
 | 	if (old_jiffies == 0) | 
 | 		old_jiffies = jiffies; | 
 |  | 
 | 	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { | 
 | 		dev_err(drvdata->dev, | 
 | 			"TX: timeout, probably we missed an interrupt\n"); | 
 | 		goto err; | 
 | 	} | 
 | 	old_jiffies = jiffies; | 
 |  | 
 | 	switch (cnt) { | 
 | 	case PS2_START_BIT: | 
 | 		/* should never happen */ | 
 | 		dev_err(drvdata->dev, | 
 | 			"TX: start bit should have been sent already\n"); | 
 | 		goto err; | 
 | 	case PS2_DATA_BIT0: | 
 | 	case PS2_DATA_BIT1: | 
 | 	case PS2_DATA_BIT2: | 
 | 	case PS2_DATA_BIT3: | 
 | 	case PS2_DATA_BIT4: | 
 | 	case PS2_DATA_BIT5: | 
 | 	case PS2_DATA_BIT6: | 
 | 	case PS2_DATA_BIT7: | 
 | 		data = byte & BIT(cnt - 1); | 
 | 		gpiod_set_value(drvdata->gpio_data, data); | 
 | 		break; | 
 | 	case PS2_PARITY_BIT: | 
 | 		/* do odd parity */ | 
 | 		data = !(hweight8(byte) & 1); | 
 | 		gpiod_set_value(drvdata->gpio_data, data); | 
 | 		break; | 
 | 	case PS2_STOP_BIT: | 
 | 		/* release data line to generate stop bit */ | 
 | 		gpiod_direction_input(drvdata->gpio_data); | 
 | 		break; | 
 | 	case PS2_TX_TIMEOUT: | 
 | 		/* Devices generate one extra clock pulse before sending the | 
 | 		 * acknowledgment. | 
 | 		 */ | 
 | 		break; | 
 | 	case PS2_ACK_BIT: | 
 | 		gpiod_direction_input(drvdata->gpio_data); | 
 | 		data = gpiod_get_value(drvdata->gpio_data); | 
 | 		if (data) { | 
 | 			dev_warn(drvdata->dev, "TX: received NACK, retry\n"); | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		drvdata->mode = PS2_MODE_RX; | 
 | 		complete(&drvdata->tx_done); | 
 |  | 
 | 		cnt = 1; | 
 | 		old_jiffies = 0; | 
 | 		goto end; /* success */ | 
 | 	default: | 
 | 		/* Probably we missed the stop bit. Therefore we release data | 
 | 		 * line and try again. | 
 | 		 */ | 
 | 		gpiod_direction_input(drvdata->gpio_data); | 
 | 		dev_err(drvdata->dev, "TX: got out of sync with the device\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	cnt++; | 
 | 	goto end; /* success */ | 
 |  | 
 | err: | 
 | 	cnt = 1; | 
 | 	old_jiffies = 0; | 
 | 	gpiod_direction_input(drvdata->gpio_data); | 
 | 	__ps2_gpio_write(drvdata->serio, drvdata->tx_byte); | 
 | end: | 
 | 	drvdata->tx_cnt = cnt; | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata = dev_id; | 
 |  | 
 | 	return drvdata->mode ? ps2_gpio_irq_tx(drvdata) : | 
 | 		ps2_gpio_irq_rx(drvdata); | 
 | } | 
 |  | 
 | static int ps2_gpio_get_props(struct device *dev, | 
 | 				 struct ps2_gpio_data *drvdata) | 
 | { | 
 | 	drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); | 
 | 	if (IS_ERR(drvdata->gpio_data)) { | 
 | 		dev_err(dev, "failed to request data gpio: %ld", | 
 | 			PTR_ERR(drvdata->gpio_data)); | 
 | 		return PTR_ERR(drvdata->gpio_data); | 
 | 	} | 
 |  | 
 | 	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); | 
 | 	if (IS_ERR(drvdata->gpio_clk)) { | 
 | 		dev_err(dev, "failed to request clock gpio: %ld", | 
 | 			PTR_ERR(drvdata->gpio_clk)); | 
 | 		return PTR_ERR(drvdata->gpio_clk); | 
 | 	} | 
 |  | 
 | 	drvdata->write_enable = device_property_read_bool(dev, | 
 | 				"write-enable"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ps2_gpio_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata; | 
 | 	struct serio *serio; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	int error; | 
 |  | 
 | 	drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL); | 
 | 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL); | 
 | 	if (!drvdata || !serio) { | 
 | 		error = -ENOMEM; | 
 | 		goto err_free_serio; | 
 | 	} | 
 |  | 
 | 	error = ps2_gpio_get_props(dev, drvdata); | 
 | 	if (error) | 
 | 		goto err_free_serio; | 
 |  | 
 | 	if (gpiod_cansleep(drvdata->gpio_data) || | 
 | 	    gpiod_cansleep(drvdata->gpio_clk)) { | 
 | 		dev_err(dev, "GPIO data or clk are connected via slow bus\n"); | 
 | 		error = -EINVAL; | 
 | 		goto err_free_serio; | 
 | 	} | 
 |  | 
 | 	drvdata->irq = platform_get_irq(pdev, 0); | 
 | 	if (drvdata->irq < 0) { | 
 | 		dev_err(dev, "failed to get irq from platform resource: %d\n", | 
 | 			drvdata->irq); | 
 | 		error = drvdata->irq; | 
 | 		goto err_free_serio; | 
 | 	} | 
 |  | 
 | 	error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq, | 
 | 				 IRQF_NO_THREAD, DRIVER_NAME, drvdata); | 
 | 	if (error) { | 
 | 		dev_err(dev, "failed to request irq %d: %d\n", | 
 | 			drvdata->irq, error); | 
 | 		goto err_free_serio; | 
 | 	} | 
 |  | 
 | 	/* Keep irq disabled until serio->open is called. */ | 
 | 	disable_irq(drvdata->irq); | 
 |  | 
 | 	serio->id.type = SERIO_8042; | 
 | 	serio->open = ps2_gpio_open; | 
 | 	serio->close = ps2_gpio_close; | 
 | 	/* Write can be enabled in platform/dt data, but possibly it will not | 
 | 	 * work because of the tough timings. | 
 | 	 */ | 
 | 	serio->write = drvdata->write_enable ? ps2_gpio_write : NULL; | 
 | 	serio->port_data = drvdata; | 
 | 	serio->dev.parent = dev; | 
 | 	strlcpy(serio->name, dev_name(dev), sizeof(serio->name)); | 
 | 	strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys)); | 
 |  | 
 | 	drvdata->serio = serio; | 
 | 	drvdata->dev = dev; | 
 | 	drvdata->mode = PS2_MODE_RX; | 
 |  | 
 | 	/* Tx count always starts at 1, as the start bit is sent implicitly by | 
 | 	 * host-to-device communication initialization. | 
 | 	 */ | 
 | 	drvdata->tx_cnt = 1; | 
 |  | 
 | 	INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn); | 
 | 	init_completion(&drvdata->tx_done); | 
 | 	mutex_init(&drvdata->tx_mutex); | 
 |  | 
 | 	serio_register_port(serio); | 
 | 	platform_set_drvdata(pdev, drvdata); | 
 |  | 
 | 	return 0;	/* success */ | 
 |  | 
 | err_free_serio: | 
 | 	kfree(serio); | 
 | 	return error; | 
 | } | 
 |  | 
 | static int ps2_gpio_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev); | 
 |  | 
 | 	serio_unregister_port(drvdata->serio); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #if defined(CONFIG_OF) | 
 | static const struct of_device_id ps2_gpio_match[] = { | 
 | 	{ .compatible = "ps2-gpio", }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, ps2_gpio_match); | 
 | #endif | 
 |  | 
 | static struct platform_driver ps2_gpio_driver = { | 
 | 	.probe		= ps2_gpio_probe, | 
 | 	.remove		= ps2_gpio_remove, | 
 | 	.driver = { | 
 | 		.name = DRIVER_NAME, | 
 | 		.of_match_table = of_match_ptr(ps2_gpio_match), | 
 | 	}, | 
 | }; | 
 | module_platform_driver(ps2_gpio_driver); | 
 |  | 
 | MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>"); | 
 | MODULE_DESCRIPTION("GPIO PS2 driver"); | 
 | MODULE_LICENSE("GPL v2"); |