|  | /* | 
|  | *  linux/arch/arm/kernel/ecard.c | 
|  | * | 
|  | *  Copyright 1995-2001 Russell King | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | *  Find all installed expansion cards, and handle interrupts from them. | 
|  | * | 
|  | *  Created from information from Acorns RiscOS3 PRMs | 
|  | * | 
|  | *  08-Dec-1996	RMK	Added code for the 9'th expansion card - the ether | 
|  | *			podule slot. | 
|  | *  06-May-1997	RMK	Added blacklist for cards whose loader doesn't work. | 
|  | *  12-Sep-1997	RMK	Created new handling of interrupt enables/disables | 
|  | *			- cards can now register their own routine to control | 
|  | *			interrupts (recommended). | 
|  | *  29-Sep-1997	RMK	Expansion card interrupt hardware not being re-enabled | 
|  | *			on reset from Linux. (Caused cards not to respond | 
|  | *			under RiscOS without hard reset). | 
|  | *  15-Feb-1998	RMK	Added DMA support | 
|  | *  12-Sep-1998	RMK	Added EASI support | 
|  | *  10-Jan-1999	RMK	Run loaders in a simulated RISC OS environment. | 
|  | *  17-Apr-1999	RMK	Support for EASI Type C cycles. | 
|  | */ | 
|  | #define ECARD_C | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/sched/mm.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <asm/dma.h> | 
|  | #include <asm/ecard.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/mmu_context.h> | 
|  | #include <asm/mach/irq.h> | 
|  | #include <asm/tlbflush.h> | 
|  |  | 
|  | #include "ecard.h" | 
|  |  | 
|  | struct ecard_request { | 
|  | void		(*fn)(struct ecard_request *); | 
|  | ecard_t		*ec; | 
|  | unsigned int	address; | 
|  | unsigned int	length; | 
|  | unsigned int	use_loader; | 
|  | void		*buffer; | 
|  | struct completion *complete; | 
|  | }; | 
|  |  | 
|  | struct expcard_blacklist { | 
|  | unsigned short	 manufacturer; | 
|  | unsigned short	 product; | 
|  | const char	*type; | 
|  | }; | 
|  |  | 
|  | static ecard_t *cards; | 
|  | static ecard_t *slot_to_expcard[MAX_ECARDS]; | 
|  | static unsigned int ectcr; | 
|  |  | 
|  | /* List of descriptions of cards which don't have an extended | 
|  | * identification, or chunk directories containing a description. | 
|  | */ | 
|  | static struct expcard_blacklist __initdata blacklist[] = { | 
|  | { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } | 
|  | }; | 
|  |  | 
|  | asmlinkage extern int | 
|  | ecard_loader_reset(unsigned long base, loader_t loader); | 
|  | asmlinkage extern int | 
|  | ecard_loader_read(int off, unsigned long base, loader_t loader); | 
|  |  | 
|  | static inline unsigned short ecard_getu16(unsigned char *v) | 
|  | { | 
|  | return v[0] | v[1] << 8; | 
|  | } | 
|  |  | 
|  | static inline signed long ecard_gets24(unsigned char *v) | 
|  | { | 
|  | return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0); | 
|  | } | 
|  |  | 
|  | static inline ecard_t *slot_to_ecard(unsigned int slot) | 
|  | { | 
|  | return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL; | 
|  | } | 
|  |  | 
|  | /* ===================== Expansion card daemon ======================== */ | 
|  | /* | 
|  | * Since the loader programs on the expansion cards need to be run | 
|  | * in a specific environment, create a separate task with this | 
|  | * environment up, and pass requests to this task as and when we | 
|  | * need to. | 
|  | * | 
|  | * This should allow 99% of loaders to be called from Linux. | 
|  | * | 
|  | * From a security standpoint, we trust the card vendors.  This | 
|  | * may be a misplaced trust. | 
|  | */ | 
|  | static void ecard_task_reset(struct ecard_request *req) | 
|  | { | 
|  | struct expansion_card *ec = req->ec; | 
|  | struct resource *res; | 
|  |  | 
|  | res = ec->slot_no == 8 | 
|  | ? &ec->resource[ECARD_RES_MEMC] | 
|  | : ec->easi | 
|  | ? &ec->resource[ECARD_RES_EASI] | 
|  | : &ec->resource[ECARD_RES_IOCSYNC]; | 
|  |  | 
|  | ecard_loader_reset(res->start, ec->loader); | 
|  | } | 
|  |  | 
|  | static void ecard_task_readbytes(struct ecard_request *req) | 
|  | { | 
|  | struct expansion_card *ec = req->ec; | 
|  | unsigned char *buf = req->buffer; | 
|  | unsigned int len = req->length; | 
|  | unsigned int off = req->address; | 
|  |  | 
|  | if (ec->slot_no == 8) { | 
|  | void __iomem *base = (void __iomem *) | 
|  | ec->resource[ECARD_RES_MEMC].start; | 
|  |  | 
|  | /* | 
|  | * The card maintains an index which increments the address | 
|  | * into a 4096-byte page on each access.  We need to keep | 
|  | * track of the counter. | 
|  | */ | 
|  | static unsigned int index; | 
|  | unsigned int page; | 
|  |  | 
|  | page = (off >> 12) * 4; | 
|  | if (page > 256 * 4) | 
|  | return; | 
|  |  | 
|  | off &= 4095; | 
|  |  | 
|  | /* | 
|  | * If we are reading offset 0, or our current index is | 
|  | * greater than the offset, reset the hardware index counter. | 
|  | */ | 
|  | if (off == 0 || index > off) { | 
|  | writeb(0, base); | 
|  | index = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Increment the hardware index counter until we get to the | 
|  | * required offset.  The read bytes are discarded. | 
|  | */ | 
|  | while (index < off) { | 
|  | readb(base + page); | 
|  | index += 1; | 
|  | } | 
|  |  | 
|  | while (len--) { | 
|  | *buf++ = readb(base + page); | 
|  | index += 1; | 
|  | } | 
|  | } else { | 
|  | unsigned long base = (ec->easi | 
|  | ? &ec->resource[ECARD_RES_EASI] | 
|  | : &ec->resource[ECARD_RES_IOCSYNC])->start; | 
|  | void __iomem *pbase = (void __iomem *)base; | 
|  |  | 
|  | if (!req->use_loader || !ec->loader) { | 
|  | off *= 4; | 
|  | while (len--) { | 
|  | *buf++ = readb(pbase + off); | 
|  | off += 4; | 
|  | } | 
|  | } else { | 
|  | while(len--) { | 
|  | /* | 
|  | * The following is required by some | 
|  | * expansion card loader programs. | 
|  | */ | 
|  | *(unsigned long *)0x108 = 0; | 
|  | *buf++ = ecard_loader_read(off++, base, | 
|  | ec->loader); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static DECLARE_WAIT_QUEUE_HEAD(ecard_wait); | 
|  | static struct ecard_request *ecard_req; | 
|  | static DEFINE_MUTEX(ecard_mutex); | 
|  |  | 
|  | /* | 
|  | * Set up the expansion card daemon's page tables. | 
|  | */ | 
|  | static void ecard_init_pgtables(struct mm_struct *mm) | 
|  | { | 
|  | struct vm_area_struct vma = TLB_FLUSH_VMA(mm, VM_EXEC); | 
|  |  | 
|  | /* We want to set up the page tables for the following mapping: | 
|  | *  Virtual	Physical | 
|  | *  0x03000000	0x03000000 | 
|  | *  0x03010000	unmapped | 
|  | *  0x03210000	0x03210000 | 
|  | *  0x03400000	unmapped | 
|  | *  0x08000000	0x08000000 | 
|  | *  0x10000000	unmapped | 
|  | * | 
|  | * FIXME: we don't follow this 100% yet. | 
|  | */ | 
|  | pgd_t *src_pgd, *dst_pgd; | 
|  |  | 
|  | src_pgd = pgd_offset(mm, (unsigned long)IO_BASE); | 
|  | dst_pgd = pgd_offset(mm, IO_START); | 
|  |  | 
|  | memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE)); | 
|  |  | 
|  | src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE); | 
|  | dst_pgd = pgd_offset(mm, EASI_START); | 
|  |  | 
|  | memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); | 
|  |  | 
|  | flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); | 
|  | flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE); | 
|  | } | 
|  |  | 
|  | static int ecard_init_mm(void) | 
|  | { | 
|  | struct mm_struct * mm = mm_alloc(); | 
|  | struct mm_struct *active_mm = current->active_mm; | 
|  |  | 
|  | if (!mm) | 
|  | return -ENOMEM; | 
|  |  | 
|  | current->mm = mm; | 
|  | current->active_mm = mm; | 
|  | activate_mm(active_mm, mm); | 
|  | mmdrop(active_mm); | 
|  | ecard_init_pgtables(mm); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ecard_task(void * unused) | 
|  | { | 
|  | /* | 
|  | * Allocate a mm.  We're not a lazy-TLB kernel task since we need | 
|  | * to set page table entries where the user space would be.  Note | 
|  | * that this also creates the page tables.  Failure is not an | 
|  | * option here. | 
|  | */ | 
|  | if (ecard_init_mm()) | 
|  | panic("kecardd: unable to alloc mm\n"); | 
|  |  | 
|  | while (1) { | 
|  | struct ecard_request *req; | 
|  |  | 
|  | wait_event_interruptible(ecard_wait, ecard_req != NULL); | 
|  |  | 
|  | req = xchg(&ecard_req, NULL); | 
|  | if (req != NULL) { | 
|  | req->fn(req); | 
|  | complete(req->complete); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Wake the expansion card daemon to action our request. | 
|  | * | 
|  | * FIXME: The test here is not sufficient to detect if the | 
|  | * kcardd is running. | 
|  | */ | 
|  | static void ecard_call(struct ecard_request *req) | 
|  | { | 
|  | DECLARE_COMPLETION_ONSTACK(completion); | 
|  |  | 
|  | req->complete = &completion; | 
|  |  | 
|  | mutex_lock(&ecard_mutex); | 
|  | ecard_req = req; | 
|  | wake_up(&ecard_wait); | 
|  |  | 
|  | /* | 
|  | * Now wait for kecardd to run. | 
|  | */ | 
|  | wait_for_completion(&completion); | 
|  | mutex_unlock(&ecard_mutex); | 
|  | } | 
|  |  | 
|  | /* ======================= Mid-level card control ===================== */ | 
|  |  | 
|  | static void | 
|  | ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld) | 
|  | { | 
|  | struct ecard_request req; | 
|  |  | 
|  | req.fn		= ecard_task_readbytes; | 
|  | req.ec		= ec; | 
|  | req.address	= off; | 
|  | req.length	= len; | 
|  | req.use_loader	= useld; | 
|  | req.buffer	= addr; | 
|  |  | 
|  | ecard_call(&req); | 
|  | } | 
|  |  | 
|  | int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) | 
|  | { | 
|  | struct ex_chunk_dir excd; | 
|  | int index = 16; | 
|  | int useld = 0; | 
|  |  | 
|  | if (!ec->cid.cd) | 
|  | return 0; | 
|  |  | 
|  | while(1) { | 
|  | ecard_readbytes(&excd, ec, index, 8, useld); | 
|  | index += 8; | 
|  | if (c_id(&excd) == 0) { | 
|  | if (!useld && ec->loader) { | 
|  | useld = 1; | 
|  | index = 0; | 
|  | continue; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | if (c_id(&excd) == 0xf0) { /* link */ | 
|  | index = c_start(&excd); | 
|  | continue; | 
|  | } | 
|  | if (c_id(&excd) == 0x80) { /* loader */ | 
|  | if (!ec->loader) { | 
|  | ec->loader = kmalloc(c_len(&excd), | 
|  | GFP_KERNEL); | 
|  | if (ec->loader) | 
|  | ecard_readbytes(ec->loader, ec, | 
|  | (int)c_start(&excd), | 
|  | c_len(&excd), useld); | 
|  | else | 
|  | return 0; | 
|  | } | 
|  | continue; | 
|  | } | 
|  | if (c_id(&excd) == id && num-- == 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (c_id(&excd) & 0x80) { | 
|  | switch (c_id(&excd) & 0x70) { | 
|  | case 0x70: | 
|  | ecard_readbytes((unsigned char *)excd.d.string, ec, | 
|  | (int)c_start(&excd), c_len(&excd), | 
|  | useld); | 
|  | break; | 
|  | case 0x00: | 
|  | break; | 
|  | } | 
|  | } | 
|  | cd->start_offset = c_start(&excd); | 
|  | memcpy(cd->d.string, excd.d.string, 256); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* ======================= Interrupt control ============================ */ | 
|  |  | 
|  | static void ecard_def_irq_enable(ecard_t *ec, int irqnr) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void ecard_def_irq_disable(ecard_t *ec, int irqnr) | 
|  | { | 
|  | } | 
|  |  | 
|  | static int ecard_def_irq_pending(ecard_t *ec) | 
|  | { | 
|  | return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask; | 
|  | } | 
|  |  | 
|  | static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr) | 
|  | { | 
|  | panic("ecard_def_fiq_enable called - impossible"); | 
|  | } | 
|  |  | 
|  | static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr) | 
|  | { | 
|  | panic("ecard_def_fiq_disable called - impossible"); | 
|  | } | 
|  |  | 
|  | static int ecard_def_fiq_pending(ecard_t *ec) | 
|  | { | 
|  | return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask; | 
|  | } | 
|  |  | 
|  | static expansioncard_ops_t ecard_default_ops = { | 
|  | ecard_def_irq_enable, | 
|  | ecard_def_irq_disable, | 
|  | ecard_def_irq_pending, | 
|  | ecard_def_fiq_enable, | 
|  | ecard_def_fiq_disable, | 
|  | ecard_def_fiq_pending | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Enable and disable interrupts from expansion cards. | 
|  | * (interrupts are disabled for these functions). | 
|  | * | 
|  | * They are not meant to be called directly, but via enable/disable_irq. | 
|  | */ | 
|  | static void ecard_irq_unmask(struct irq_data *d) | 
|  | { | 
|  | ecard_t *ec = irq_data_get_irq_chip_data(d); | 
|  |  | 
|  | if (ec) { | 
|  | if (!ec->ops) | 
|  | ec->ops = &ecard_default_ops; | 
|  |  | 
|  | if (ec->claimed && ec->ops->irqenable) | 
|  | ec->ops->irqenable(ec, d->irq); | 
|  | else | 
|  | printk(KERN_ERR "ecard: rejecting request to " | 
|  | "enable IRQs for %d\n", d->irq); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ecard_irq_mask(struct irq_data *d) | 
|  | { | 
|  | ecard_t *ec = irq_data_get_irq_chip_data(d); | 
|  |  | 
|  | if (ec) { | 
|  | if (!ec->ops) | 
|  | ec->ops = &ecard_default_ops; | 
|  |  | 
|  | if (ec->ops && ec->ops->irqdisable) | 
|  | ec->ops->irqdisable(ec, d->irq); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct irq_chip ecard_chip = { | 
|  | .name		= "ECARD", | 
|  | .irq_ack	= ecard_irq_mask, | 
|  | .irq_mask	= ecard_irq_mask, | 
|  | .irq_unmask	= ecard_irq_unmask, | 
|  | }; | 
|  |  | 
|  | void ecard_enablefiq(unsigned int fiqnr) | 
|  | { | 
|  | ecard_t *ec = slot_to_ecard(fiqnr); | 
|  |  | 
|  | if (ec) { | 
|  | if (!ec->ops) | 
|  | ec->ops = &ecard_default_ops; | 
|  |  | 
|  | if (ec->claimed && ec->ops->fiqenable) | 
|  | ec->ops->fiqenable(ec, fiqnr); | 
|  | else | 
|  | printk(KERN_ERR "ecard: rejecting request to " | 
|  | "enable FIQs for %d\n", fiqnr); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ecard_disablefiq(unsigned int fiqnr) | 
|  | { | 
|  | ecard_t *ec = slot_to_ecard(fiqnr); | 
|  |  | 
|  | if (ec) { | 
|  | if (!ec->ops) | 
|  | ec->ops = &ecard_default_ops; | 
|  |  | 
|  | if (ec->ops->fiqdisable) | 
|  | ec->ops->fiqdisable(ec, fiqnr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ecard_dump_irq_state(void) | 
|  | { | 
|  | ecard_t *ec; | 
|  |  | 
|  | printk("Expansion card IRQ state:\n"); | 
|  |  | 
|  | for (ec = cards; ec; ec = ec->next) { | 
|  | if (ec->slot_no == 8) | 
|  | continue; | 
|  |  | 
|  | printk("  %d: %sclaimed, ", | 
|  | ec->slot_no, ec->claimed ? "" : "not "); | 
|  |  | 
|  | if (ec->ops && ec->ops->irqpending && | 
|  | ec->ops != &ecard_default_ops) | 
|  | printk("irq %spending\n", | 
|  | ec->ops->irqpending(ec) ? "" : "not "); | 
|  | else | 
|  | printk("irqaddr %p, mask = %02X, status = %02X\n", | 
|  | ec->irqaddr, ec->irqmask, readb(ec->irqaddr)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ecard_check_lockup(struct irq_desc *desc) | 
|  | { | 
|  | static unsigned long last; | 
|  | static int lockup; | 
|  |  | 
|  | /* | 
|  | * If the timer interrupt has not run since the last million | 
|  | * unrecognised expansion card interrupts, then there is | 
|  | * something seriously wrong.  Disable the expansion card | 
|  | * interrupts so at least we can continue. | 
|  | * | 
|  | * Maybe we ought to start a timer to re-enable them some time | 
|  | * later? | 
|  | */ | 
|  | if (last == jiffies) { | 
|  | lockup += 1; | 
|  | if (lockup > 1000000) { | 
|  | printk(KERN_ERR "\nInterrupt lockup detected - " | 
|  | "disabling all expansion card interrupts\n"); | 
|  |  | 
|  | desc->irq_data.chip->irq_mask(&desc->irq_data); | 
|  | ecard_dump_irq_state(); | 
|  | } | 
|  | } else | 
|  | lockup = 0; | 
|  |  | 
|  | /* | 
|  | * If we did not recognise the source of this interrupt, | 
|  | * warn the user, but don't flood the user with these messages. | 
|  | */ | 
|  | if (!last || time_after(jiffies, last + 5*HZ)) { | 
|  | last = jiffies; | 
|  | printk(KERN_WARNING "Unrecognised interrupt from backplane\n"); | 
|  | ecard_dump_irq_state(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ecard_irq_handler(struct irq_desc *desc) | 
|  | { | 
|  | ecard_t *ec; | 
|  | int called = 0; | 
|  |  | 
|  | desc->irq_data.chip->irq_mask(&desc->irq_data); | 
|  | for (ec = cards; ec; ec = ec->next) { | 
|  | int pending; | 
|  |  | 
|  | if (!ec->claimed || !ec->irq || ec->slot_no == 8) | 
|  | continue; | 
|  |  | 
|  | if (ec->ops && ec->ops->irqpending) | 
|  | pending = ec->ops->irqpending(ec); | 
|  | else | 
|  | pending = ecard_default_ops.irqpending(ec); | 
|  |  | 
|  | if (pending) { | 
|  | generic_handle_irq(ec->irq); | 
|  | called ++; | 
|  | } | 
|  | } | 
|  | desc->irq_data.chip->irq_unmask(&desc->irq_data); | 
|  |  | 
|  | if (called == 0) | 
|  | ecard_check_lockup(desc); | 
|  | } | 
|  |  | 
|  | static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) | 
|  | { | 
|  | void __iomem *address = NULL; | 
|  | int slot = ec->slot_no; | 
|  |  | 
|  | if (ec->slot_no == 8) | 
|  | return ECARD_MEMC8_BASE; | 
|  |  | 
|  | ectcr &= ~(1 << slot); | 
|  |  | 
|  | switch (type) { | 
|  | case ECARD_MEMC: | 
|  | if (slot < 4) | 
|  | address = ECARD_MEMC_BASE + (slot << 14); | 
|  | break; | 
|  |  | 
|  | case ECARD_IOC: | 
|  | if (slot < 4) | 
|  | address = ECARD_IOC_BASE + (slot << 14); | 
|  | else | 
|  | address = ECARD_IOC4_BASE + ((slot - 4) << 14); | 
|  | if (address) | 
|  | address += speed << 19; | 
|  | break; | 
|  |  | 
|  | case ECARD_EASI: | 
|  | address = ECARD_EASI_BASE + (slot << 24); | 
|  | if (speed == ECARD_FAST) | 
|  | ectcr |= 1 << slot; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | #ifdef IOMD_ECTCR | 
|  | iomd_writeb(ectcr, IOMD_ECTCR); | 
|  | #endif | 
|  | return address; | 
|  | } | 
|  |  | 
|  | static int ecard_prints(struct seq_file *m, ecard_t *ec) | 
|  | { | 
|  | seq_printf(m, "  %d: %s ", ec->slot_no, ec->easi ? "EASI" : "    "); | 
|  |  | 
|  | if (ec->cid.id == 0) { | 
|  | struct in_chunk_dir incd; | 
|  |  | 
|  | seq_printf(m, "[%04X:%04X] ", | 
|  | ec->cid.manufacturer, ec->cid.product); | 
|  |  | 
|  | if (!ec->card_desc && ec->cid.cd && | 
|  | ecard_readchunk(&incd, ec, 0xf5, 0)) { | 
|  | ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL); | 
|  |  | 
|  | if (ec->card_desc) | 
|  | strcpy((char *)ec->card_desc, incd.d.string); | 
|  | } | 
|  |  | 
|  | seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*"); | 
|  | } else | 
|  | seq_printf(m, "Simple card %d\n", ec->cid.id); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ecard_devices_proc_show(struct seq_file *m, void *v) | 
|  | { | 
|  | ecard_t *ec = cards; | 
|  |  | 
|  | while (ec) { | 
|  | ecard_prints(m, ec); | 
|  | ec = ec->next; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct proc_dir_entry *proc_bus_ecard_dir = NULL; | 
|  |  | 
|  | static void ecard_proc_init(void) | 
|  | { | 
|  | proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL); | 
|  | proc_create_single("devices", 0, proc_bus_ecard_dir, | 
|  | ecard_devices_proc_show); | 
|  | } | 
|  |  | 
|  | #define ec_set_resource(ec,nr,st,sz)				\ | 
|  | do {							\ | 
|  | (ec)->resource[nr].name = dev_name(&ec->dev);	\ | 
|  | (ec)->resource[nr].start = st;			\ | 
|  | (ec)->resource[nr].end = (st) + (sz) - 1;	\ | 
|  | (ec)->resource[nr].flags = IORESOURCE_MEM;	\ | 
|  | } while (0) | 
|  |  | 
|  | static void __init ecard_free_card(struct expansion_card *ec) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ECARD_NUM_RESOURCES; i++) | 
|  | if (ec->resource[i].flags) | 
|  | release_resource(&ec->resource[i]); | 
|  |  | 
|  | kfree(ec); | 
|  | } | 
|  |  | 
|  | static struct expansion_card *__init ecard_alloc_card(int type, int slot) | 
|  | { | 
|  | struct expansion_card *ec; | 
|  | unsigned long base; | 
|  | int i; | 
|  |  | 
|  | ec = kzalloc(sizeof(ecard_t), GFP_KERNEL); | 
|  | if (!ec) { | 
|  | ec = ERR_PTR(-ENOMEM); | 
|  | goto nomem; | 
|  | } | 
|  |  | 
|  | ec->slot_no = slot; | 
|  | ec->easi = type == ECARD_EASI; | 
|  | ec->irq = 0; | 
|  | ec->fiq = 0; | 
|  | ec->dma = NO_DMA; | 
|  | ec->ops = &ecard_default_ops; | 
|  |  | 
|  | dev_set_name(&ec->dev, "ecard%d", slot); | 
|  | ec->dev.parent = NULL; | 
|  | ec->dev.bus = &ecard_bus_type; | 
|  | ec->dev.dma_mask = &ec->dma_mask; | 
|  | ec->dma_mask = (u64)0xffffffff; | 
|  | ec->dev.coherent_dma_mask = ec->dma_mask; | 
|  |  | 
|  | if (slot < 4) { | 
|  | ec_set_resource(ec, ECARD_RES_MEMC, | 
|  | PODSLOT_MEMC_BASE + (slot << 14), | 
|  | PODSLOT_MEMC_SIZE); | 
|  | base = PODSLOT_IOC0_BASE + (slot << 14); | 
|  | } else | 
|  | base = PODSLOT_IOC4_BASE + ((slot - 4) << 14); | 
|  |  | 
|  | #ifdef CONFIG_ARCH_RPC | 
|  | if (slot < 8) { | 
|  | ec_set_resource(ec, ECARD_RES_EASI, | 
|  | PODSLOT_EASI_BASE + (slot << 24), | 
|  | PODSLOT_EASI_SIZE); | 
|  | } | 
|  |  | 
|  | if (slot == 8) { | 
|  | ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE); | 
|  | } else | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++) | 
|  | ec_set_resource(ec, i + ECARD_RES_IOCSLOW, | 
|  | base + (i << 19), PODSLOT_IOC_SIZE); | 
|  |  | 
|  | for (i = 0; i < ECARD_NUM_RESOURCES; i++) { | 
|  | if (ec->resource[i].flags && | 
|  | request_resource(&iomem_resource, &ec->resource[i])) { | 
|  | dev_err(&ec->dev, "resource(s) not available\n"); | 
|  | ec->resource[i].end -= ec->resource[i].start; | 
|  | ec->resource[i].start = 0; | 
|  | ec->resource[i].flags = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | nomem: | 
|  | return ec; | 
|  | } | 
|  |  | 
|  | static ssize_t irq_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | return sprintf(buf, "%u\n", ec->irq); | 
|  | } | 
|  | static DEVICE_ATTR_RO(irq); | 
|  |  | 
|  | static ssize_t dma_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | return sprintf(buf, "%u\n", ec->dma); | 
|  | } | 
|  | static DEVICE_ATTR_RO(dma); | 
|  |  | 
|  | static ssize_t resource_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | char *str = buf; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ECARD_NUM_RESOURCES; i++) | 
|  | str += sprintf(str, "%08x %08x %08lx\n", | 
|  | ec->resource[i].start, | 
|  | ec->resource[i].end, | 
|  | ec->resource[i].flags); | 
|  |  | 
|  | return str - buf; | 
|  | } | 
|  | static DEVICE_ATTR_RO(resource); | 
|  |  | 
|  | static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | return sprintf(buf, "%u\n", ec->cid.manufacturer); | 
|  | } | 
|  | static DEVICE_ATTR_RO(vendor); | 
|  |  | 
|  | static ssize_t device_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | return sprintf(buf, "%u\n", ec->cid.product); | 
|  | } | 
|  | static DEVICE_ATTR_RO(device); | 
|  |  | 
|  | static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC"); | 
|  | } | 
|  | static DEVICE_ATTR_RO(type); | 
|  |  | 
|  | static struct attribute *ecard_dev_attrs[] = { | 
|  | &dev_attr_device.attr, | 
|  | &dev_attr_dma.attr, | 
|  | &dev_attr_irq.attr, | 
|  | &dev_attr_resource.attr, | 
|  | &dev_attr_type.attr, | 
|  | &dev_attr_vendor.attr, | 
|  | NULL, | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(ecard_dev); | 
|  |  | 
|  | int ecard_request_resources(struct expansion_card *ec) | 
|  | { | 
|  | int i, err = 0; | 
|  |  | 
|  | for (i = 0; i < ECARD_NUM_RESOURCES; i++) { | 
|  | if (ecard_resource_end(ec, i) && | 
|  | !request_mem_region(ecard_resource_start(ec, i), | 
|  | ecard_resource_len(ec, i), | 
|  | ec->dev.driver->name)) { | 
|  | err = -EBUSY; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (err) { | 
|  | while (i--) | 
|  | if (ecard_resource_end(ec, i)) | 
|  | release_mem_region(ecard_resource_start(ec, i), | 
|  | ecard_resource_len(ec, i)); | 
|  | } | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(ecard_request_resources); | 
|  |  | 
|  | void ecard_release_resources(struct expansion_card *ec) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ECARD_NUM_RESOURCES; i++) | 
|  | if (ecard_resource_end(ec, i)) | 
|  | release_mem_region(ecard_resource_start(ec, i), | 
|  | ecard_resource_len(ec, i)); | 
|  | } | 
|  | EXPORT_SYMBOL(ecard_release_resources); | 
|  |  | 
|  | void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data) | 
|  | { | 
|  | ec->irq_data = irq_data; | 
|  | barrier(); | 
|  | ec->ops = ops; | 
|  | } | 
|  | EXPORT_SYMBOL(ecard_setirq); | 
|  |  | 
|  | void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res, | 
|  | unsigned long offset, unsigned long maxsize) | 
|  | { | 
|  | unsigned long start = ecard_resource_start(ec, res); | 
|  | unsigned long end = ecard_resource_end(ec, res); | 
|  |  | 
|  | if (offset > (end - start)) | 
|  | return NULL; | 
|  |  | 
|  | start += offset; | 
|  | if (maxsize && end - start > maxsize) | 
|  | end = start + maxsize; | 
|  |  | 
|  | return devm_ioremap(&ec->dev, start, end - start); | 
|  | } | 
|  | EXPORT_SYMBOL(ecardm_iomap); | 
|  |  | 
|  | /* | 
|  | * Probe for an expansion card. | 
|  | * | 
|  | * If bit 1 of the first byte of the card is set, then the | 
|  | * card does not exist. | 
|  | */ | 
|  | static int __init ecard_probe(int slot, unsigned irq, card_type_t type) | 
|  | { | 
|  | ecard_t **ecp; | 
|  | ecard_t *ec; | 
|  | struct ex_ecid cid; | 
|  | void __iomem *addr; | 
|  | int i, rc; | 
|  |  | 
|  | ec = ecard_alloc_card(type, slot); | 
|  | if (IS_ERR(ec)) { | 
|  | rc = PTR_ERR(ec); | 
|  | goto nomem; | 
|  | } | 
|  |  | 
|  | rc = -ENODEV; | 
|  | if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL) | 
|  | goto nodev; | 
|  |  | 
|  | cid.r_zero = 1; | 
|  | ecard_readbytes(&cid, ec, 0, 16, 0); | 
|  | if (cid.r_zero) | 
|  | goto nodev; | 
|  |  | 
|  | ec->cid.id	= cid.r_id; | 
|  | ec->cid.cd	= cid.r_cd; | 
|  | ec->cid.is	= cid.r_is; | 
|  | ec->cid.w	= cid.r_w; | 
|  | ec->cid.manufacturer = ecard_getu16(cid.r_manu); | 
|  | ec->cid.product = ecard_getu16(cid.r_prod); | 
|  | ec->cid.country = cid.r_country; | 
|  | ec->cid.irqmask = cid.r_irqmask; | 
|  | ec->cid.irqoff  = ecard_gets24(cid.r_irqoff); | 
|  | ec->cid.fiqmask = cid.r_fiqmask; | 
|  | ec->cid.fiqoff  = ecard_gets24(cid.r_fiqoff); | 
|  | ec->fiqaddr	= | 
|  | ec->irqaddr	= addr; | 
|  |  | 
|  | if (ec->cid.is) { | 
|  | ec->irqmask = ec->cid.irqmask; | 
|  | ec->irqaddr += ec->cid.irqoff; | 
|  | ec->fiqmask = ec->cid.fiqmask; | 
|  | ec->fiqaddr += ec->cid.fiqoff; | 
|  | } else { | 
|  | ec->irqmask = 1; | 
|  | ec->fiqmask = 4; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(blacklist); i++) | 
|  | if (blacklist[i].manufacturer == ec->cid.manufacturer && | 
|  | blacklist[i].product == ec->cid.product) { | 
|  | ec->card_desc = blacklist[i].type; | 
|  | break; | 
|  | } | 
|  |  | 
|  | ec->irq = irq; | 
|  |  | 
|  | /* | 
|  | * hook the interrupt handlers | 
|  | */ | 
|  | if (slot < 8) { | 
|  | irq_set_chip_and_handler(ec->irq, &ecard_chip, | 
|  | handle_level_irq); | 
|  | irq_set_chip_data(ec->irq, ec); | 
|  | irq_clear_status_flags(ec->irq, IRQ_NOREQUEST); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_ARCH_RPC | 
|  | /* On RiscPC, only first two slots have DMA capability */ | 
|  | if (slot < 2) | 
|  | ec->dma = 2 + slot; | 
|  | #endif | 
|  |  | 
|  | for (ecp = &cards; *ecp; ecp = &(*ecp)->next); | 
|  |  | 
|  | *ecp = ec; | 
|  | slot_to_expcard[slot] = ec; | 
|  |  | 
|  | rc = device_register(&ec->dev); | 
|  | if (rc) | 
|  | goto nodev; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | nodev: | 
|  | ecard_free_card(ec); | 
|  | nomem: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initialise the expansion card system. | 
|  | * Locate all hardware - interrupt management and | 
|  | * actual cards. | 
|  | */ | 
|  | static int __init ecard_init(void) | 
|  | { | 
|  | struct task_struct *task; | 
|  | int slot, irqbase; | 
|  |  | 
|  | irqbase = irq_alloc_descs(-1, 0, 8, -1); | 
|  | if (irqbase < 0) | 
|  | return irqbase; | 
|  |  | 
|  | task = kthread_run(ecard_task, NULL, "kecardd"); | 
|  | if (IS_ERR(task)) { | 
|  | printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n", | 
|  | PTR_ERR(task)); | 
|  | irq_free_descs(irqbase, 8); | 
|  | return PTR_ERR(task); | 
|  | } | 
|  |  | 
|  | printk("Probing expansion cards\n"); | 
|  |  | 
|  | for (slot = 0; slot < 8; slot ++) { | 
|  | if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV) | 
|  | ecard_probe(slot, irqbase + slot, ECARD_IOC); | 
|  | } | 
|  |  | 
|  | ecard_probe(8, 11, ECARD_IOC); | 
|  |  | 
|  | irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler); | 
|  |  | 
|  | ecard_proc_init(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(ecard_init); | 
|  |  | 
|  | /* | 
|  | *	ECARD "bus" | 
|  | */ | 
|  | static const struct ecard_id * | 
|  | ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; ids[i].manufacturer != 65535; i++) | 
|  | if (ec->cid.manufacturer == ids[i].manufacturer && | 
|  | ec->cid.product == ids[i].product) | 
|  | return ids + i; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int ecard_drv_probe(struct device *dev) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | struct ecard_driver *drv = ECARD_DRV(dev->driver); | 
|  | const struct ecard_id *id; | 
|  | int ret; | 
|  |  | 
|  | id = ecard_match_device(drv->id_table, ec); | 
|  |  | 
|  | ec->claimed = 1; | 
|  | ret = drv->probe(ec, id); | 
|  | if (ret) | 
|  | ec->claimed = 0; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ecard_drv_remove(struct device *dev) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | struct ecard_driver *drv = ECARD_DRV(dev->driver); | 
|  |  | 
|  | drv->remove(ec); | 
|  | ec->claimed = 0; | 
|  |  | 
|  | /* | 
|  | * Restore the default operations.  We ensure that the | 
|  | * ops are set before we change the data. | 
|  | */ | 
|  | ec->ops = &ecard_default_ops; | 
|  | barrier(); | 
|  | ec->irq_data = NULL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Before rebooting, we must make sure that the expansion card is in a | 
|  | * sensible state, so it can be re-detected.  This means that the first | 
|  | * page of the ROM must be visible.  We call the expansion cards reset | 
|  | * handler, if any. | 
|  | */ | 
|  | static void ecard_drv_shutdown(struct device *dev) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(dev); | 
|  | struct ecard_driver *drv = ECARD_DRV(dev->driver); | 
|  | struct ecard_request req; | 
|  |  | 
|  | if (dev->driver) { | 
|  | if (drv->shutdown) | 
|  | drv->shutdown(ec); | 
|  | ec->claimed = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If this card has a loader, call the reset handler. | 
|  | */ | 
|  | if (ec->loader) { | 
|  | req.fn = ecard_task_reset; | 
|  | req.ec = ec; | 
|  | ecard_call(&req); | 
|  | } | 
|  | } | 
|  |  | 
|  | int ecard_register_driver(struct ecard_driver *drv) | 
|  | { | 
|  | drv->drv.bus = &ecard_bus_type; | 
|  |  | 
|  | return driver_register(&drv->drv); | 
|  | } | 
|  |  | 
|  | void ecard_remove_driver(struct ecard_driver *drv) | 
|  | { | 
|  | driver_unregister(&drv->drv); | 
|  | } | 
|  |  | 
|  | static int ecard_match(struct device *_dev, struct device_driver *_drv) | 
|  | { | 
|  | struct expansion_card *ec = ECARD_DEV(_dev); | 
|  | struct ecard_driver *drv = ECARD_DRV(_drv); | 
|  | int ret; | 
|  |  | 
|  | if (drv->id_table) { | 
|  | ret = ecard_match_device(drv->id_table, ec) != NULL; | 
|  | } else { | 
|  | ret = ec->cid.id == drv->id; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct bus_type ecard_bus_type = { | 
|  | .name		= "ecard", | 
|  | .dev_groups	= ecard_dev_groups, | 
|  | .match		= ecard_match, | 
|  | .probe		= ecard_drv_probe, | 
|  | .remove		= ecard_drv_remove, | 
|  | .shutdown	= ecard_drv_shutdown, | 
|  | }; | 
|  |  | 
|  | static int ecard_bus_init(void) | 
|  | { | 
|  | return bus_register(&ecard_bus_type); | 
|  | } | 
|  |  | 
|  | postcore_initcall(ecard_bus_init); | 
|  |  | 
|  | EXPORT_SYMBOL(ecard_readchunk); | 
|  | EXPORT_SYMBOL(ecard_register_driver); | 
|  | EXPORT_SYMBOL(ecard_remove_driver); | 
|  | EXPORT_SYMBOL(ecard_bus_type); |