| /* ------------------------------------------------------------------------- | 
 |  * Copyright (C) 2014-2016, Intel Corporation | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2 of the License, or | 
 |  *  (at your option) any later version. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *  GNU General Public License for more details. | 
 |  * ------------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/nfc.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <net/nfc/nfc.h> | 
 | #include <net/nfc/nci_core.h> | 
 |  | 
 | #include "fdp.h" | 
 |  | 
 | #define FDP_I2C_DRIVER_NAME	"fdp_nci_i2c" | 
 |  | 
 | #define FDP_DP_CLOCK_TYPE_NAME	"clock-type" | 
 | #define FDP_DP_CLOCK_FREQ_NAME	"clock-freq" | 
 | #define FDP_DP_FW_VSC_CFG_NAME	"fw-vsc-cfg" | 
 |  | 
 | #define FDP_FRAME_HEADROOM	2 | 
 | #define FDP_FRAME_TAILROOM	1 | 
 |  | 
 | #define FDP_NCI_I2C_MIN_PAYLOAD	5 | 
 | #define FDP_NCI_I2C_MAX_PAYLOAD	261 | 
 |  | 
 | #define FDP_POWER_OFF		0 | 
 | #define FDP_POWER_ON		1 | 
 |  | 
 | #define fdp_nci_i2c_dump_skb(dev, prefix, skb)				\ | 
 | 	print_hex_dump(KERN_DEBUG, prefix": ", DUMP_PREFIX_OFFSET,	\ | 
 | 		       16, 1, (skb)->data, (skb)->len, 0) | 
 |  | 
 | static void fdp_nci_i2c_reset(struct fdp_i2c_phy *phy) | 
 | { | 
 | 	/* Reset RST/WakeUP for at least 100 micro-second */ | 
 | 	gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_OFF); | 
 | 	usleep_range(1000, 4000); | 
 | 	gpiod_set_value_cansleep(phy->power_gpio, FDP_POWER_ON); | 
 | 	usleep_range(10000, 14000); | 
 | } | 
 |  | 
 | static int fdp_nci_i2c_enable(void *phy_id) | 
 | { | 
 | 	struct fdp_i2c_phy *phy = phy_id; | 
 |  | 
 | 	dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__); | 
 | 	fdp_nci_i2c_reset(phy); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void fdp_nci_i2c_disable(void *phy_id) | 
 | { | 
 | 	struct fdp_i2c_phy *phy = phy_id; | 
 |  | 
 | 	dev_dbg(&phy->i2c_dev->dev, "%s\n", __func__); | 
 | 	fdp_nci_i2c_reset(phy); | 
 | } | 
 |  | 
 | static void fdp_nci_i2c_add_len_lrc(struct sk_buff *skb) | 
 | { | 
 | 	u8 lrc = 0; | 
 | 	u16 len, i; | 
 |  | 
 | 	/* Add length header */ | 
 | 	len = skb->len; | 
 | 	*(u8 *)skb_push(skb, 1) = len & 0xff; | 
 | 	*(u8 *)skb_push(skb, 1) = len >> 8; | 
 |  | 
 | 	/* Compute and add lrc */ | 
 | 	for (i = 0; i < len + 2; i++) | 
 | 		lrc ^= skb->data[i]; | 
 |  | 
 | 	skb_put_u8(skb, lrc); | 
 | } | 
 |  | 
 | static void fdp_nci_i2c_remove_len_lrc(struct sk_buff *skb) | 
 | { | 
 | 	skb_pull(skb, FDP_FRAME_HEADROOM); | 
 | 	skb_trim(skb, skb->len - FDP_FRAME_TAILROOM); | 
 | } | 
 |  | 
 | static int fdp_nci_i2c_write(void *phy_id, struct sk_buff *skb) | 
 | { | 
 | 	struct fdp_i2c_phy *phy = phy_id; | 
 | 	struct i2c_client *client = phy->i2c_dev; | 
 | 	int r; | 
 |  | 
 | 	if (phy->hard_fault != 0) | 
 | 		return phy->hard_fault; | 
 |  | 
 | 	fdp_nci_i2c_add_len_lrc(skb); | 
 | 	fdp_nci_i2c_dump_skb(&client->dev, "fdp_wr", skb); | 
 |  | 
 | 	r = i2c_master_send(client, skb->data, skb->len); | 
 | 	if (r == -EREMOTEIO) {  /* Retry, chip was in standby */ | 
 | 		usleep_range(1000, 4000); | 
 | 		r = i2c_master_send(client, skb->data, skb->len); | 
 | 	} | 
 |  | 
 | 	if (r < 0 || r != skb->len) | 
 | 		dev_dbg(&client->dev, "%s: error err=%d len=%d\n", | 
 | 			__func__, r, skb->len); | 
 |  | 
 | 	if (r >= 0) { | 
 | 		if (r != skb->len) { | 
 | 			phy->hard_fault = r; | 
 | 			r = -EREMOTEIO; | 
 | 		} else { | 
 | 			r = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	fdp_nci_i2c_remove_len_lrc(skb); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | static struct nfc_phy_ops i2c_phy_ops = { | 
 | 	.write = fdp_nci_i2c_write, | 
 | 	.enable = fdp_nci_i2c_enable, | 
 | 	.disable = fdp_nci_i2c_disable, | 
 | }; | 
 |  | 
 | static int fdp_nci_i2c_read(struct fdp_i2c_phy *phy, struct sk_buff **skb) | 
 | { | 
 | 	int r, len; | 
 | 	u8 tmp[FDP_NCI_I2C_MAX_PAYLOAD], lrc, k; | 
 | 	u16 i; | 
 | 	struct i2c_client *client = phy->i2c_dev; | 
 |  | 
 | 	*skb = NULL; | 
 |  | 
 | 	/* Read the length packet and the data packet */ | 
 | 	for (k = 0; k < 2; k++) { | 
 |  | 
 | 		len = phy->next_read_size; | 
 |  | 
 | 		r = i2c_master_recv(client, tmp, len); | 
 | 		if (r != len) { | 
 | 			dev_dbg(&client->dev, "%s: i2c recv err: %d\n", | 
 | 				__func__, r); | 
 | 			goto flush; | 
 | 		} | 
 |  | 
 | 		/* Check packet integruty */ | 
 | 		for (lrc = i = 0; i < r; i++) | 
 | 			lrc ^= tmp[i]; | 
 |  | 
 | 		/* | 
 | 		 * LRC check failed. This may due to transmission error or | 
 | 		 * desynchronization between driver and FDP. Drop the paquet | 
 | 		 * and force resynchronization | 
 | 		 */ | 
 | 		if (lrc) { | 
 | 			dev_dbg(&client->dev, "%s: corrupted packet\n", | 
 | 				__func__); | 
 | 			phy->next_read_size = 5; | 
 | 			goto flush; | 
 | 		} | 
 |  | 
 | 		/* Packet that contains a length */ | 
 | 		if (tmp[0] == 0 && tmp[1] == 0) { | 
 | 			phy->next_read_size = (tmp[2] << 8) + tmp[3] + 3; | 
 | 		} else { | 
 | 			phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; | 
 |  | 
 | 			*skb = alloc_skb(len, GFP_KERNEL); | 
 | 			if (*skb == NULL) { | 
 | 				r = -ENOMEM; | 
 | 				goto flush; | 
 | 			} | 
 |  | 
 | 			skb_put_data(*skb, tmp, len); | 
 | 			fdp_nci_i2c_dump_skb(&client->dev, "fdp_rd", *skb); | 
 |  | 
 | 			fdp_nci_i2c_remove_len_lrc(*skb); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | flush: | 
 | 	/* Flush the remaining data */ | 
 | 	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) | 
 | 		r = -EREMOTEIO; | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | static irqreturn_t fdp_nci_i2c_irq_thread_fn(int irq, void *phy_id) | 
 | { | 
 | 	struct fdp_i2c_phy *phy = phy_id; | 
 | 	struct i2c_client *client; | 
 | 	struct sk_buff *skb; | 
 | 	int r; | 
 |  | 
 | 	if (!phy || irq != phy->i2c_dev->irq) { | 
 | 		WARN_ON_ONCE(1); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 |  | 
 | 	client = phy->i2c_dev; | 
 | 	dev_dbg(&client->dev, "%s\n", __func__); | 
 |  | 
 | 	r = fdp_nci_i2c_read(phy, &skb); | 
 |  | 
 | 	if (r == -EREMOTEIO) | 
 | 		return IRQ_HANDLED; | 
 | 	else if (r == -ENOMEM || r == -EBADMSG) | 
 | 		return IRQ_HANDLED; | 
 |  | 
 | 	if (skb != NULL) | 
 | 		fdp_nci_recv_frame(phy->ndev, skb); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static void fdp_nci_i2c_read_device_properties(struct device *dev, | 
 | 					       u8 *clock_type, u32 *clock_freq, | 
 | 					       u8 **fw_vsc_cfg) | 
 | { | 
 | 	int r; | 
 | 	u8 len; | 
 |  | 
 | 	r = device_property_read_u8(dev, FDP_DP_CLOCK_TYPE_NAME, clock_type); | 
 | 	if (r) { | 
 | 		dev_dbg(dev, "Using default clock type"); | 
 | 		*clock_type = 0; | 
 | 	} | 
 |  | 
 | 	r = device_property_read_u32(dev, FDP_DP_CLOCK_FREQ_NAME, clock_freq); | 
 | 	if (r) { | 
 | 		dev_dbg(dev, "Using default clock frequency\n"); | 
 | 		*clock_freq = 26000; | 
 | 	} | 
 |  | 
 | 	if (device_property_present(dev, FDP_DP_FW_VSC_CFG_NAME)) { | 
 | 		r = device_property_read_u8(dev, FDP_DP_FW_VSC_CFG_NAME, | 
 | 					    &len); | 
 |  | 
 | 		if (r || len <= 0) | 
 | 			goto vsc_read_err; | 
 |  | 
 | 		/* Add 1 to the length to inclue the length byte itself */ | 
 | 		len++; | 
 |  | 
 | 		*fw_vsc_cfg = devm_kmalloc_array(dev, | 
 | 					   len, sizeof(**fw_vsc_cfg), | 
 | 					   GFP_KERNEL); | 
 |  | 
 | 		r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME, | 
 | 						  *fw_vsc_cfg, len); | 
 |  | 
 | 		if (r) { | 
 | 			devm_kfree(dev, *fw_vsc_cfg); | 
 | 			goto vsc_read_err; | 
 | 		} | 
 | 	} else { | 
 | vsc_read_err: | 
 | 		dev_dbg(dev, "FW vendor specific commands not present\n"); | 
 | 		*fw_vsc_cfg = NULL; | 
 | 	} | 
 |  | 
 | 	dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s", | 
 | 		*clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no"); | 
 | } | 
 |  | 
 | static const struct acpi_gpio_params power_gpios = { 0, 0, false }; | 
 |  | 
 | static const struct acpi_gpio_mapping acpi_fdp_gpios[] = { | 
 | 	{ "power-gpios", &power_gpios, 1 }, | 
 | 	{}, | 
 | }; | 
 |  | 
 | static int fdp_nci_i2c_probe(struct i2c_client *client) | 
 | { | 
 | 	struct fdp_i2c_phy *phy; | 
 | 	struct device *dev = &client->dev; | 
 | 	u8 *fw_vsc_cfg; | 
 | 	u8 clock_type; | 
 | 	u32 clock_freq; | 
 | 	int r = 0; | 
 |  | 
 | 	dev_dbg(dev, "%s\n", __func__); | 
 |  | 
 | 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | 
 | 		nfc_err(dev, "No I2C_FUNC_I2C support\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* Checking if we have an irq */ | 
 | 	if (client->irq <= 0) { | 
 | 		nfc_err(dev, "IRQ not present\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy), GFP_KERNEL); | 
 | 	if (!phy) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	phy->i2c_dev = client; | 
 | 	phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD; | 
 | 	i2c_set_clientdata(client, phy); | 
 |  | 
 | 	r = devm_request_threaded_irq(dev, client->irq, | 
 | 				      NULL, fdp_nci_i2c_irq_thread_fn, | 
 | 				      IRQF_TRIGGER_RISING | IRQF_ONESHOT, | 
 | 				      FDP_I2C_DRIVER_NAME, phy); | 
 |  | 
 | 	if (r < 0) { | 
 | 		nfc_err(&client->dev, "Unable to register IRQ handler\n"); | 
 | 		return r; | 
 | 	} | 
 |  | 
 | 	r = devm_acpi_dev_add_driver_gpios(dev, acpi_fdp_gpios); | 
 | 	if (r) | 
 | 		dev_dbg(dev, "Unable to add GPIO mapping table\n"); | 
 |  | 
 | 	/* Requesting the power gpio */ | 
 | 	phy->power_gpio = devm_gpiod_get(dev, "power", GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(phy->power_gpio)) { | 
 | 		nfc_err(dev, "Power GPIO request failed\n"); | 
 | 		return PTR_ERR(phy->power_gpio); | 
 | 	} | 
 |  | 
 | 	/* read device properties to get the clock and production settings */ | 
 | 	fdp_nci_i2c_read_device_properties(dev, &clock_type, &clock_freq, | 
 | 					   &fw_vsc_cfg); | 
 |  | 
 | 	/* Call the NFC specific probe function */ | 
 | 	r = fdp_nci_probe(phy, &i2c_phy_ops, &phy->ndev, | 
 | 			  FDP_FRAME_HEADROOM, FDP_FRAME_TAILROOM, | 
 | 			  clock_type, clock_freq, fw_vsc_cfg); | 
 | 	if (r < 0) { | 
 | 		nfc_err(dev, "NCI probing error\n"); | 
 | 		return r; | 
 | 	} | 
 |  | 
 | 	dev_dbg(dev, "I2C driver loaded\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fdp_nci_i2c_remove(struct i2c_client *client) | 
 | { | 
 | 	struct fdp_i2c_phy *phy = i2c_get_clientdata(client); | 
 |  | 
 | 	dev_dbg(&client->dev, "%s\n", __func__); | 
 |  | 
 | 	fdp_nci_remove(phy->ndev); | 
 | 	fdp_nci_i2c_disable(phy); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct acpi_device_id fdp_nci_i2c_acpi_match[] = { | 
 | 	{"INT339A", 0}, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, fdp_nci_i2c_acpi_match); | 
 |  | 
 | static struct i2c_driver fdp_nci_i2c_driver = { | 
 | 	.driver = { | 
 | 		   .name = FDP_I2C_DRIVER_NAME, | 
 | 		   .acpi_match_table = ACPI_PTR(fdp_nci_i2c_acpi_match), | 
 | 		  }, | 
 | 	.probe_new = fdp_nci_i2c_probe, | 
 | 	.remove = fdp_nci_i2c_remove, | 
 | }; | 
 | module_i2c_driver(fdp_nci_i2c_driver); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_DESCRIPTION("I2C driver for Intel Fields Peak NFC controller"); | 
 | MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); |