src/kernel/linux/v4.19/include/media/v4l2-mediabus.h - T800 - Gitiles

 /*
  * Media Bus API header
  *
  * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #ifndef V4L2_MEDIABUS_H
 #define V4L2_MEDIABUS_H

 #include <linux/v4l2-mediabus.h>
 #include <linux/bitops.h>


 /* Parallel flags */
 /*
  * Can the client run in master or in slave mode. By "Master mode" an operation
  * mode is meant, when the client (e.g., a camera sensor) is producing
  * horizontal and vertical synchronisation. In "Slave mode" the host is
  * providing these signals to the slave.
  */
 #define V4L2_MBUS_MASTER			BIT(0)
 #define V4L2_MBUS_SLAVE				BIT(1)
 /*
  * Signal polarity flags
  * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
  * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
  * configuration of hardware that uses [HV]REF signals
  */
 #define V4L2_MBUS_HSYNC_ACTIVE_HIGH		BIT(2)
 #define V4L2_MBUS_HSYNC_ACTIVE_LOW		BIT(3)
 #define V4L2_MBUS_VSYNC_ACTIVE_HIGH		BIT(4)
 #define V4L2_MBUS_VSYNC_ACTIVE_LOW		BIT(5)
 #define V4L2_MBUS_PCLK_SAMPLE_RISING		BIT(6)
 #define V4L2_MBUS_PCLK_SAMPLE_FALLING		BIT(7)
 #define V4L2_MBUS_DATA_ACTIVE_HIGH		BIT(8)
 #define V4L2_MBUS_DATA_ACTIVE_LOW		BIT(9)
 /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
 #define V4L2_MBUS_FIELD_EVEN_HIGH		BIT(10)
 /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
 #define V4L2_MBUS_FIELD_EVEN_LOW		BIT(11)
 /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
 #define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH		BIT(12)
 #define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		BIT(13)
 #define V4L2_MBUS_DATA_ENABLE_HIGH		BIT(14)
 #define V4L2_MBUS_DATA_ENABLE_LOW		BIT(15)

 /* Serial flags */
 /* How many lanes the client can use */
 #define V4L2_MBUS_CSI2_1_LANE			BIT(0)
 #define V4L2_MBUS_CSI2_2_LANE			BIT(1)
 #define V4L2_MBUS_CSI2_3_LANE			BIT(2)
 #define V4L2_MBUS_CSI2_4_LANE			BIT(3)
 /* On which channels it can send video data */
 #define V4L2_MBUS_CSI2_CHANNEL_0		BIT(4)
 #define V4L2_MBUS_CSI2_CHANNEL_1		BIT(5)
 #define V4L2_MBUS_CSI2_CHANNEL_2		BIT(6)
 #define V4L2_MBUS_CSI2_CHANNEL_3		BIT(7)
 /* Does it support only continuous or also non-continuous clock mode */
 #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		BIT(8)
 #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(9)

 #define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
 					 V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
 #define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
 					 V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)

 /**
  * enum v4l2_mbus_type - media bus type
  * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
  * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
  *			also be used for BT.1120
  * @V4L2_MBUS_CSI1:	MIPI CSI-1 serial interface
  * @V4L2_MBUS_CCP2:	CCP2 (Compact Camera Port 2)
  * @V4L2_MBUS_CSI2:	MIPI CSI-2 serial interface
  */
 enum v4l2_mbus_type {
 	V4L2_MBUS_PARALLEL,
 	V4L2_MBUS_BT656,
 	V4L2_MBUS_CSI1,
 	V4L2_MBUS_CCP2,
 	V4L2_MBUS_CSI2,
 };

 /**
  * struct v4l2_mbus_config - media bus configuration
  * @type:	in: interface type
  * @flags:	in / out: configuration flags, depending on @type
  */
 struct v4l2_mbus_config {
 	enum v4l2_mbus_type type;
 	unsigned int flags;
 };

 /**
  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
  *	v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
  *
  * @pix_fmt:	pointer to &struct v4l2_pix_format to be filled
  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
  */
 static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
 				const struct v4l2_mbus_framefmt *mbus_fmt)
 {
 	pix_fmt->width = mbus_fmt->width;
 	pix_fmt->height = mbus_fmt->height;
 	pix_fmt->field = mbus_fmt->field;
 	pix_fmt->colorspace = mbus_fmt->colorspace;
 	pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
 	pix_fmt->quantization = mbus_fmt->quantization;
 	pix_fmt->xfer_func = mbus_fmt->xfer_func;
 }

 /**
  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
  *	v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
  *	data format code.
  *
  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
  * @pix_fmt:	pointer to &struct v4l2_pix_format to be used as model
  * @code:	data format code (from &enum v4l2_mbus_pixelcode)
  */
 static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
 			   const struct v4l2_pix_format *pix_fmt,
 			   u32 code)
 {
 	mbus_fmt->width = pix_fmt->width;
 	mbus_fmt->height = pix_fmt->height;
 	mbus_fmt->field = pix_fmt->field;
 	mbus_fmt->colorspace = pix_fmt->colorspace;
 	mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc;
 	mbus_fmt->quantization = pix_fmt->quantization;
 	mbus_fmt->xfer_func = pix_fmt->xfer_func;
 	mbus_fmt->code = code;
 }

 /**
  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
  *	v4l2_pix_format_mplane fields from a media bus structure.
  *
  * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be filled
  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
  */
 static inline void v4l2_fill_pix_format_mplane(
 				struct v4l2_pix_format_mplane *pix_mp_fmt,
 				const struct v4l2_mbus_framefmt *mbus_fmt)
 {
 	pix_mp_fmt->width = mbus_fmt->width;
 	pix_mp_fmt->height = mbus_fmt->height;
 	pix_mp_fmt->field = mbus_fmt->field;
 	pix_mp_fmt->colorspace = mbus_fmt->colorspace;
 	pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
 	pix_mp_fmt->quantization = mbus_fmt->quantization;
 	pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
 }

 /**
  * v4l2_fill_pix_format - Ancillary routine that fills a &struct
  *	v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
  *
  * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
  * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be used as model
  */
 static inline void v4l2_fill_mbus_format_mplane(
 				struct v4l2_mbus_framefmt *mbus_fmt,
 				const struct v4l2_pix_format_mplane *pix_mp_fmt)
 {
 	mbus_fmt->width = pix_mp_fmt->width;
 	mbus_fmt->height = pix_mp_fmt->height;
 	mbus_fmt->field = pix_mp_fmt->field;
 	mbus_fmt->colorspace = pix_mp_fmt->colorspace;
 	mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc;
 	mbus_fmt->quantization = pix_mp_fmt->quantization;
 	mbus_fmt->xfer_func = pix_mp_fmt->xfer_func;
 }

 #endif
	/*
	* Media Bus API header
	*
	* Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#ifndef V4L2_MEDIABUS_H
	#define V4L2_MEDIABUS_H

	#include <linux/v4l2-mediabus.h>
	#include <linux/bitops.h>


	/* Parallel flags */
	/*
	* Can the client run in master or in slave mode. By "Master mode" an operation
	* mode is meant, when the client (e.g., a camera sensor) is producing
	* horizontal and vertical synchronisation. In "Slave mode" the host is
	* providing these signals to the slave.
	*/
	#define V4L2_MBUS_MASTER BIT(0)
	#define V4L2_MBUS_SLAVE BIT(1)
	/*
	* Signal polarity flags
	* Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
	* V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
	* configuration of hardware that uses [HV]REF signals
	*/
	#define V4L2_MBUS_HSYNC_ACTIVE_HIGH BIT(2)
	#define V4L2_MBUS_HSYNC_ACTIVE_LOW BIT(3)
	#define V4L2_MBUS_VSYNC_ACTIVE_HIGH BIT(4)
	#define V4L2_MBUS_VSYNC_ACTIVE_LOW BIT(5)
	#define V4L2_MBUS_PCLK_SAMPLE_RISING BIT(6)
	#define V4L2_MBUS_PCLK_SAMPLE_FALLING BIT(7)
	#define V4L2_MBUS_DATA_ACTIVE_HIGH BIT(8)
	#define V4L2_MBUS_DATA_ACTIVE_LOW BIT(9)
	/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
	#define V4L2_MBUS_FIELD_EVEN_HIGH BIT(10)
	/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
	#define V4L2_MBUS_FIELD_EVEN_LOW BIT(11)
	/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
	#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH BIT(12)
	#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW BIT(13)
	#define V4L2_MBUS_DATA_ENABLE_HIGH BIT(14)
	#define V4L2_MBUS_DATA_ENABLE_LOW BIT(15)

	/* Serial flags */
	/* How many lanes the client can use */
	#define V4L2_MBUS_CSI2_1_LANE BIT(0)
	#define V4L2_MBUS_CSI2_2_LANE BIT(1)
	#define V4L2_MBUS_CSI2_3_LANE BIT(2)
	#define V4L2_MBUS_CSI2_4_LANE BIT(3)
	/* On which channels it can send video data */
	#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4)
	#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5)
	#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6)
	#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7)
	/* Does it support only continuous or also non-continuous clock mode */
	#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8)
	#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9)

	#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE \| V4L2_MBUS_CSI2_2_LANE \| \
	V4L2_MBUS_CSI2_3_LANE \| V4L2_MBUS_CSI2_4_LANE)
	#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 \| V4L2_MBUS_CSI2_CHANNEL_1 \| \
	V4L2_MBUS_CSI2_CHANNEL_2 \| V4L2_MBUS_CSI2_CHANNEL_3)

	/**
	* enum v4l2_mbus_type - media bus type
	* @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync
	* @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can
	* also be used for BT.1120
	* @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface
	* @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2)
	* @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface
	*/
	enum v4l2_mbus_type {
	V4L2_MBUS_PARALLEL,
	V4L2_MBUS_BT656,
	V4L2_MBUS_CSI1,
	V4L2_MBUS_CCP2,
	V4L2_MBUS_CSI2,
	};

	/**
	* struct v4l2_mbus_config - media bus configuration
	* @type: in: interface type
	* @flags: in / out: configuration flags, depending on @type
	*/
	struct v4l2_mbus_config {
	enum v4l2_mbus_type type;
	unsigned int flags;
	};

	/**
	* v4l2_fill_pix_format - Ancillary routine that fills a &struct
	* v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
	*
	* @pix_fmt: pointer to &struct v4l2_pix_format to be filled
	* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model
	*/
	static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
	const struct v4l2_mbus_framefmt *mbus_fmt)
	{
	pix_fmt->width = mbus_fmt->width;
	pix_fmt->height = mbus_fmt->height;
	pix_fmt->field = mbus_fmt->field;
	pix_fmt->colorspace = mbus_fmt->colorspace;
	pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
	pix_fmt->quantization = mbus_fmt->quantization;
	pix_fmt->xfer_func = mbus_fmt->xfer_func;
	}

	/**
	* v4l2_fill_pix_format - Ancillary routine that fills a &struct
	* v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
	* data format code.
	*
	* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled
	* @pix_fmt: pointer to &struct v4l2_pix_format to be used as model
	* @code: data format code (from &enum v4l2_mbus_pixelcode)
	*/
	static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
	const struct v4l2_pix_format *pix_fmt,
	u32 code)
	{
	mbus_fmt->width = pix_fmt->width;
	mbus_fmt->height = pix_fmt->height;
	mbus_fmt->field = pix_fmt->field;
	mbus_fmt->colorspace = pix_fmt->colorspace;
	mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc;
	mbus_fmt->quantization = pix_fmt->quantization;
	mbus_fmt->xfer_func = pix_fmt->xfer_func;
	mbus_fmt->code = code;
	}

	/**
	* v4l2_fill_pix_format - Ancillary routine that fills a &struct
	* v4l2_pix_format_mplane fields from a media bus structure.
	*
	* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be filled
	* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model
	*/
	static inline void v4l2_fill_pix_format_mplane(
	struct v4l2_pix_format_mplane *pix_mp_fmt,
	const struct v4l2_mbus_framefmt *mbus_fmt)
	{
	pix_mp_fmt->width = mbus_fmt->width;
	pix_mp_fmt->height = mbus_fmt->height;
	pix_mp_fmt->field = mbus_fmt->field;
	pix_mp_fmt->colorspace = mbus_fmt->colorspace;
	pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc;
	pix_mp_fmt->quantization = mbus_fmt->quantization;
	pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
	}

	/**
	* v4l2_fill_pix_format - Ancillary routine that fills a &struct
	* v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
	*
	* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled
	* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be used as model
	*/
	static inline void v4l2_fill_mbus_format_mplane(
	struct v4l2_mbus_framefmt *mbus_fmt,
	const struct v4l2_pix_format_mplane *pix_mp_fmt)
	{
	mbus_fmt->width = pix_mp_fmt->width;
	mbus_fmt->height = pix_mp_fmt->height;
	mbus_fmt->field = pix_mp_fmt->field;
	mbus_fmt->colorspace = pix_mp_fmt->colorspace;
	mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc;
	mbus_fmt->quantization = pix_mp_fmt->quantization;
	mbus_fmt->xfer_func = pix_mp_fmt->xfer_func;
	}

	#endif