|  | /* | 
|  | *  PNX833x Hardware Watchdog Driver | 
|  | *  Copyright 2008 NXP Semiconductors | 
|  | *  Daniel Laird <daniel.j.laird@nxp.com> | 
|  | *  Andre McCurdy <andre.mccurdy@nxp.com> | 
|  | * | 
|  | *  Heavily based upon - IndyDog	0.3 | 
|  | *  A Hardware Watchdog Device for SGI IP22 | 
|  | * | 
|  | * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version | 
|  | * 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * based on softdog.c by Alan Cox <alan@redhat.com> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/watchdog.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/init.h> | 
|  | #include <asm/mach-pnx833x/pnx833x.h> | 
|  |  | 
|  | #define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */ | 
|  | #define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */ | 
|  | #define	PNX_WATCHDOG_TIMEOUT	(WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY) | 
|  | #define PNX_TIMEOUT_VALUE	2040000000U | 
|  |  | 
|  | /** CONFIG block */ | 
|  | #define PNX833X_CONFIG                      (0x07000U) | 
|  | #define PNX833X_CONFIG_CPU_WATCHDOG         (0x54) | 
|  | #define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58) | 
|  | #define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c) | 
|  |  | 
|  | /** RESET block */ | 
|  | #define PNX833X_RESET                       (0x08000U) | 
|  | #define PNX833X_RESET_CONFIG                (0x08) | 
|  |  | 
|  | static int pnx833x_wdt_alive; | 
|  |  | 
|  | /* Set default timeout in MHZ.*/ | 
|  | static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT; | 
|  | module_param(pnx833x_wdt_timeout, int, 0); | 
|  | MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default=" | 
|  | __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds)."); | 
|  |  | 
|  | static bool nowayout = WATCHDOG_NOWAYOUT; | 
|  | module_param(nowayout, bool, 0); | 
|  | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | 
|  | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
|  |  | 
|  | #define START_DEFAULT	1 | 
|  | static int start_enabled = START_DEFAULT; | 
|  | module_param(start_enabled, int, 0); | 
|  | MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion " | 
|  | "(default=" __MODULE_STRING(START_DEFAULT) ")"); | 
|  |  | 
|  | static void pnx833x_wdt_start(void) | 
|  | { | 
|  | /* Enable watchdog causing reset. */ | 
|  | PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1; | 
|  | /* Set timeout.*/ | 
|  | PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
|  | /* Enable watchdog. */ | 
|  | PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1; | 
|  |  | 
|  | pr_info("Started watchdog timer\n"); | 
|  | } | 
|  |  | 
|  | static void pnx833x_wdt_stop(void) | 
|  | { | 
|  | /* Disable watchdog causing reset. */ | 
|  | PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE; | 
|  | /* Disable watchdog.*/ | 
|  | PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE; | 
|  |  | 
|  | pr_info("Stopped watchdog timer\n"); | 
|  | } | 
|  |  | 
|  | static void pnx833x_wdt_ping(void) | 
|  | { | 
|  | PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Allow only one person to hold it open | 
|  | */ | 
|  | static int pnx833x_wdt_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | if (test_and_set_bit(0, &pnx833x_wdt_alive)) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (nowayout) | 
|  | __module_get(THIS_MODULE); | 
|  |  | 
|  | /* Activate timer */ | 
|  | if (!start_enabled) | 
|  | pnx833x_wdt_start(); | 
|  |  | 
|  | pnx833x_wdt_ping(); | 
|  |  | 
|  | pr_info("Started watchdog timer\n"); | 
|  |  | 
|  | return nonseekable_open(inode, file); | 
|  | } | 
|  |  | 
|  | static int pnx833x_wdt_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | /* Shut off the timer. | 
|  | * Lock it in if it's a module and we defined ...NOWAYOUT */ | 
|  | if (!nowayout) | 
|  | pnx833x_wdt_stop(); /* Turn the WDT off */ | 
|  |  | 
|  | clear_bit(0, &pnx833x_wdt_alive); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) | 
|  | { | 
|  | /* Refresh the timer. */ | 
|  | if (len) | 
|  | pnx833x_wdt_ping(); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | int options, new_timeout = 0; | 
|  | uint32_t timeout, timeout_left = 0; | 
|  |  | 
|  | static const struct watchdog_info ident = { | 
|  | .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, | 
|  | .firmware_version = 0, | 
|  | .identity = "Hardware Watchdog for PNX833x", | 
|  | }; | 
|  |  | 
|  | switch (cmd) { | 
|  | default: | 
|  | return -ENOTTY; | 
|  |  | 
|  | case WDIOC_GETSUPPORT: | 
|  | if (copy_to_user((struct watchdog_info *)arg, | 
|  | &ident, sizeof(ident))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  |  | 
|  | case WDIOC_GETSTATUS: | 
|  | case WDIOC_GETBOOTSTATUS: | 
|  | return put_user(0, (int *)arg); | 
|  |  | 
|  | case WDIOC_SETOPTIONS: | 
|  | if (get_user(options, (int *)arg)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (options & WDIOS_DISABLECARD) | 
|  | pnx833x_wdt_stop(); | 
|  |  | 
|  | if (options & WDIOS_ENABLECARD) | 
|  | pnx833x_wdt_start(); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | case WDIOC_KEEPALIVE: | 
|  | pnx833x_wdt_ping(); | 
|  | return 0; | 
|  |  | 
|  | case WDIOC_SETTIMEOUT: | 
|  | { | 
|  | if (get_user(new_timeout, (int *)arg)) | 
|  | return -EFAULT; | 
|  |  | 
|  | pnx833x_wdt_timeout = new_timeout; | 
|  | PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout; | 
|  | return put_user(new_timeout, (int *)arg); | 
|  | } | 
|  |  | 
|  | case WDIOC_GETTIMEOUT: | 
|  | timeout = PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_WATCHDOG_COMPARE); | 
|  | return put_user(timeout, (int *)arg); | 
|  |  | 
|  | case WDIOC_GETTIMELEFT: | 
|  | timeout_left = PNX833X_REG(PNX833X_CONFIG + | 
|  | PNX833X_CONFIG_CPU_WATCHDOG); | 
|  | return put_user(timeout_left, (int *)arg); | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static int pnx833x_wdt_notify_sys(struct notifier_block *this, | 
|  | unsigned long code, void *unused) | 
|  | { | 
|  | if (code == SYS_DOWN || code == SYS_HALT) | 
|  | pnx833x_wdt_stop(); /* Turn the WDT off */ | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static const struct file_operations pnx833x_wdt_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .llseek		= no_llseek, | 
|  | .write		= pnx833x_wdt_write, | 
|  | .unlocked_ioctl	= pnx833x_wdt_ioctl, | 
|  | .open		= pnx833x_wdt_open, | 
|  | .release	= pnx833x_wdt_release, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice pnx833x_wdt_miscdev = { | 
|  | .minor		= WATCHDOG_MINOR, | 
|  | .name		= "watchdog", | 
|  | .fops		= &pnx833x_wdt_fops, | 
|  | }; | 
|  |  | 
|  | static struct notifier_block pnx833x_wdt_notifier = { | 
|  | .notifier_call = pnx833x_wdt_notify_sys, | 
|  | }; | 
|  |  | 
|  | static int __init watchdog_init(void) | 
|  | { | 
|  | int ret, cause; | 
|  |  | 
|  | /* Lets check the reason for the reset.*/ | 
|  | cause = PNX833X_REG(PNX833X_RESET); | 
|  | /*If bit 31 is set then watchdog was cause of reset.*/ | 
|  | if (cause & 0x80000000) { | 
|  | pr_info("The system was previously reset due to the watchdog firing - please investigate...\n"); | 
|  | } | 
|  |  | 
|  | ret = register_reboot_notifier(&pnx833x_wdt_notifier); | 
|  | if (ret) { | 
|  | pr_err("cannot register reboot notifier (err=%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = misc_register(&pnx833x_wdt_miscdev); | 
|  | if (ret) { | 
|  | pr_err("cannot register miscdev on minor=%d (err=%d)\n", | 
|  | WATCHDOG_MINOR, ret); | 
|  | unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | pr_info("Hardware Watchdog Timer for PNX833x: Version 0.1\n"); | 
|  |  | 
|  | if (start_enabled) | 
|  | pnx833x_wdt_start(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit watchdog_exit(void) | 
|  | { | 
|  | misc_deregister(&pnx833x_wdt_miscdev); | 
|  | unregister_reboot_notifier(&pnx833x_wdt_notifier); | 
|  | } | 
|  |  | 
|  | module_init(watchdog_init); | 
|  | module_exit(watchdog_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Daniel Laird/Andre McCurdy"); | 
|  | MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x"); | 
|  | MODULE_LICENSE("GPL"); |