|  | /* | 
|  | * motu.c - a part of driver for MOTU FireWire series | 
|  | * | 
|  | * Copyright (c) 2015-2017 Takashi Sakamoto <o-takashi@sakamocchi.jp> | 
|  | * | 
|  | * Licensed under the terms of the GNU General Public License, version 2. | 
|  | */ | 
|  |  | 
|  | #include "motu.h" | 
|  |  | 
|  | #define OUI_MOTU	0x0001f2 | 
|  |  | 
|  | MODULE_DESCRIPTION("MOTU FireWire driver"); | 
|  | MODULE_AUTHOR("Takashi Sakamoto <o-takashi@sakamocchi.jp>"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  |  | 
|  | const unsigned int snd_motu_clock_rates[SND_MOTU_CLOCK_RATE_COUNT] = { | 
|  | /* mode 0 */ | 
|  | [0] =  44100, | 
|  | [1] =  48000, | 
|  | /* mode 1 */ | 
|  | [2] =  88200, | 
|  | [3] =  96000, | 
|  | /* mode 2 */ | 
|  | [4] = 176400, | 
|  | [5] = 192000, | 
|  | }; | 
|  |  | 
|  | static void name_card(struct snd_motu *motu) | 
|  | { | 
|  | struct fw_device *fw_dev = fw_parent_device(motu->unit); | 
|  | struct fw_csr_iterator it; | 
|  | int key, val; | 
|  | u32 version = 0; | 
|  |  | 
|  | fw_csr_iterator_init(&it, motu->unit->directory); | 
|  | while (fw_csr_iterator_next(&it, &key, &val)) { | 
|  | switch (key) { | 
|  | case CSR_MODEL: | 
|  | version = val; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | strcpy(motu->card->driver, "FW-MOTU"); | 
|  | strcpy(motu->card->shortname, motu->spec->name); | 
|  | strcpy(motu->card->mixername, motu->spec->name); | 
|  | snprintf(motu->card->longname, sizeof(motu->card->longname), | 
|  | "MOTU %s (version:%06x), GUID %08x%08x at %s, S%d", | 
|  | motu->spec->name, version, | 
|  | fw_dev->config_rom[3], fw_dev->config_rom[4], | 
|  | dev_name(&motu->unit->device), 100 << fw_dev->max_speed); | 
|  | } | 
|  |  | 
|  | static void motu_free(struct snd_motu *motu) | 
|  | { | 
|  | snd_motu_transaction_unregister(motu); | 
|  |  | 
|  | snd_motu_stream_destroy_duplex(motu); | 
|  | fw_unit_put(motu->unit); | 
|  |  | 
|  | mutex_destroy(&motu->mutex); | 
|  | kfree(motu); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This module releases the FireWire unit data after all ALSA character devices | 
|  | * are released by applications. This is for releasing stream data or finishing | 
|  | * transactions safely. Thus at returning from .remove(), this module still keep | 
|  | * references for the unit. | 
|  | */ | 
|  | static void motu_card_free(struct snd_card *card) | 
|  | { | 
|  | motu_free(card->private_data); | 
|  | } | 
|  |  | 
|  | static void do_registration(struct work_struct *work) | 
|  | { | 
|  | struct snd_motu *motu = container_of(work, struct snd_motu, dwork.work); | 
|  | int err; | 
|  |  | 
|  | if (motu->registered) | 
|  | return; | 
|  |  | 
|  | err = snd_card_new(&motu->unit->device, -1, NULL, THIS_MODULE, 0, | 
|  | &motu->card); | 
|  | if (err < 0) | 
|  | return; | 
|  |  | 
|  | name_card(motu); | 
|  |  | 
|  | err = snd_motu_transaction_register(motu); | 
|  | if (err < 0) | 
|  | goto error; | 
|  |  | 
|  | err = snd_motu_stream_init_duplex(motu); | 
|  | if (err < 0) | 
|  | goto error; | 
|  |  | 
|  | snd_motu_proc_init(motu); | 
|  |  | 
|  | err = snd_motu_create_pcm_devices(motu); | 
|  | if (err < 0) | 
|  | goto error; | 
|  |  | 
|  | if ((motu->spec->flags & SND_MOTU_SPEC_RX_MIDI_2ND_Q) || | 
|  | (motu->spec->flags & SND_MOTU_SPEC_RX_MIDI_3RD_Q) || | 
|  | (motu->spec->flags & SND_MOTU_SPEC_TX_MIDI_2ND_Q) || | 
|  | (motu->spec->flags & SND_MOTU_SPEC_TX_MIDI_3RD_Q)) { | 
|  | err = snd_motu_create_midi_devices(motu); | 
|  | if (err < 0) | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | err = snd_motu_create_hwdep_device(motu); | 
|  | if (err < 0) | 
|  | goto error; | 
|  |  | 
|  | err = snd_card_register(motu->card); | 
|  | if (err < 0) | 
|  | goto error; | 
|  |  | 
|  | /* | 
|  | * After registered, motu instance can be released corresponding to | 
|  | * releasing the sound card instance. | 
|  | */ | 
|  | motu->card->private_free = motu_card_free; | 
|  | motu->card->private_data = motu; | 
|  | motu->registered = true; | 
|  |  | 
|  | return; | 
|  | error: | 
|  | snd_motu_transaction_unregister(motu); | 
|  | snd_motu_stream_destroy_duplex(motu); | 
|  | snd_card_free(motu->card); | 
|  | dev_info(&motu->unit->device, | 
|  | "Sound card registration failed: %d\n", err); | 
|  | } | 
|  |  | 
|  | static int motu_probe(struct fw_unit *unit, | 
|  | const struct ieee1394_device_id *entry) | 
|  | { | 
|  | struct snd_motu *motu; | 
|  |  | 
|  | /* Allocate this independently of sound card instance. */ | 
|  | motu = kzalloc(sizeof(struct snd_motu), GFP_KERNEL); | 
|  | if (motu == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | motu->spec = (const struct snd_motu_spec *)entry->driver_data; | 
|  | motu->unit = fw_unit_get(unit); | 
|  | dev_set_drvdata(&unit->device, motu); | 
|  |  | 
|  | mutex_init(&motu->mutex); | 
|  | spin_lock_init(&motu->lock); | 
|  | init_waitqueue_head(&motu->hwdep_wait); | 
|  |  | 
|  | /* Allocate and register this sound card later. */ | 
|  | INIT_DEFERRABLE_WORK(&motu->dwork, do_registration); | 
|  | snd_fw_schedule_registration(unit, &motu->dwork); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void motu_remove(struct fw_unit *unit) | 
|  | { | 
|  | struct snd_motu *motu = dev_get_drvdata(&unit->device); | 
|  |  | 
|  | /* | 
|  | * Confirm to stop the work for registration before the sound card is | 
|  | * going to be released. The work is not scheduled again because bus | 
|  | * reset handler is not called anymore. | 
|  | */ | 
|  | cancel_delayed_work_sync(&motu->dwork); | 
|  |  | 
|  | if (motu->registered) { | 
|  | /* No need to wait for releasing card object in this context. */ | 
|  | snd_card_free_when_closed(motu->card); | 
|  | } else { | 
|  | /* Don't forget this case. */ | 
|  | motu_free(motu); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void motu_bus_update(struct fw_unit *unit) | 
|  | { | 
|  | struct snd_motu *motu = dev_get_drvdata(&unit->device); | 
|  |  | 
|  | /* Postpone a workqueue for deferred registration. */ | 
|  | if (!motu->registered) | 
|  | snd_fw_schedule_registration(unit, &motu->dwork); | 
|  |  | 
|  | /* The handler address register becomes initialized. */ | 
|  | snd_motu_transaction_reregister(motu); | 
|  | } | 
|  |  | 
|  | static const struct snd_motu_spec motu_828mk2 = { | 
|  | .name = "828mk2", | 
|  | .protocol = &snd_motu_protocol_v2, | 
|  | .flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 | | 
|  | SND_MOTU_SPEC_TX_MICINST_CHUNK | | 
|  | SND_MOTU_SPEC_TX_RETURN_CHUNK | | 
|  | SND_MOTU_SPEC_RX_SEPARETED_MAIN | | 
|  | SND_MOTU_SPEC_HAS_OPT_IFACE_A | | 
|  | SND_MOTU_SPEC_RX_MIDI_2ND_Q | | 
|  | SND_MOTU_SPEC_TX_MIDI_2ND_Q, | 
|  |  | 
|  | .analog_in_ports = 8, | 
|  | .analog_out_ports = 8, | 
|  | }; | 
|  |  | 
|  | const struct snd_motu_spec snd_motu_spec_traveler = { | 
|  | .name = "Traveler", | 
|  | .protocol = &snd_motu_protocol_v2, | 
|  | .flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 | | 
|  | SND_MOTU_SPEC_SUPPORT_CLOCK_X4 | | 
|  | SND_MOTU_SPEC_TX_RETURN_CHUNK | | 
|  | SND_MOTU_SPEC_HAS_AESEBU_IFACE | | 
|  | SND_MOTU_SPEC_HAS_OPT_IFACE_A | | 
|  | SND_MOTU_SPEC_RX_MIDI_2ND_Q | | 
|  | SND_MOTU_SPEC_TX_MIDI_2ND_Q, | 
|  |  | 
|  | .analog_in_ports = 8, | 
|  | .analog_out_ports = 8, | 
|  | }; | 
|  |  | 
|  | static const struct snd_motu_spec motu_828mk3 = { | 
|  | .name = "828mk3", | 
|  | .protocol = &snd_motu_protocol_v3, | 
|  | .flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 | | 
|  | SND_MOTU_SPEC_SUPPORT_CLOCK_X4 | | 
|  | SND_MOTU_SPEC_TX_MICINST_CHUNK | | 
|  | SND_MOTU_SPEC_TX_RETURN_CHUNK | | 
|  | SND_MOTU_SPEC_TX_REVERB_CHUNK | | 
|  | SND_MOTU_SPEC_RX_SEPARETED_MAIN | | 
|  | SND_MOTU_SPEC_HAS_OPT_IFACE_A | | 
|  | SND_MOTU_SPEC_HAS_OPT_IFACE_B | | 
|  | SND_MOTU_SPEC_RX_MIDI_3RD_Q | | 
|  | SND_MOTU_SPEC_TX_MIDI_3RD_Q, | 
|  |  | 
|  | .analog_in_ports = 8, | 
|  | .analog_out_ports = 8, | 
|  | }; | 
|  |  | 
|  | static const struct snd_motu_spec motu_audio_express = { | 
|  | .name = "AudioExpress", | 
|  | .protocol = &snd_motu_protocol_v3, | 
|  | .flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 | | 
|  | SND_MOTU_SPEC_TX_MICINST_CHUNK | | 
|  | SND_MOTU_SPEC_TX_RETURN_CHUNK | | 
|  | SND_MOTU_SPEC_RX_SEPARETED_MAIN | | 
|  | SND_MOTU_SPEC_RX_MIDI_2ND_Q | | 
|  | SND_MOTU_SPEC_TX_MIDI_3RD_Q, | 
|  | .analog_in_ports = 2, | 
|  | .analog_out_ports = 4, | 
|  | }; | 
|  |  | 
|  | static const struct snd_motu_spec motu_4pre = { | 
|  | .name = "4pre", | 
|  | .protocol = &snd_motu_protocol_v3, | 
|  | .flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 | | 
|  | SND_MOTU_SPEC_TX_MICINST_CHUNK | | 
|  | SND_MOTU_SPEC_TX_RETURN_CHUNK | | 
|  | SND_MOTU_SPEC_RX_SEPARETED_MAIN, | 
|  | .analog_in_ports = 2, | 
|  | .analog_out_ports = 2, | 
|  | }; | 
|  |  | 
|  | #define SND_MOTU_DEV_ENTRY(model, data)			\ | 
|  | {							\ | 
|  | .match_flags	= IEEE1394_MATCH_VENDOR_ID |	\ | 
|  | IEEE1394_MATCH_SPECIFIER_ID |	\ | 
|  | IEEE1394_MATCH_VERSION,	\ | 
|  | .vendor_id	= OUI_MOTU,			\ | 
|  | .specifier_id	= OUI_MOTU,			\ | 
|  | .version	= model,			\ | 
|  | .driver_data	= (kernel_ulong_t)data,		\ | 
|  | } | 
|  |  | 
|  | static const struct ieee1394_device_id motu_id_table[] = { | 
|  | SND_MOTU_DEV_ENTRY(0x000003, &motu_828mk2), | 
|  | SND_MOTU_DEV_ENTRY(0x000009, &snd_motu_spec_traveler), | 
|  | SND_MOTU_DEV_ENTRY(0x000015, &motu_828mk3),	/* FireWire only. */ | 
|  | SND_MOTU_DEV_ENTRY(0x000035, &motu_828mk3),	/* Hybrid. */ | 
|  | SND_MOTU_DEV_ENTRY(0x000033, &motu_audio_express), | 
|  | SND_MOTU_DEV_ENTRY(0x000045, &motu_4pre), | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(ieee1394, motu_id_table); | 
|  |  | 
|  | static struct fw_driver motu_driver = { | 
|  | .driver   = { | 
|  | .owner	= THIS_MODULE, | 
|  | .name	= KBUILD_MODNAME, | 
|  | .bus	= &fw_bus_type, | 
|  | }, | 
|  | .probe    = motu_probe, | 
|  | .update   = motu_bus_update, | 
|  | .remove   = motu_remove, | 
|  | .id_table = motu_id_table, | 
|  | }; | 
|  |  | 
|  | static int __init alsa_motu_init(void) | 
|  | { | 
|  | return driver_register(&motu_driver.driver); | 
|  | } | 
|  |  | 
|  | static void __exit alsa_motu_exit(void) | 
|  | { | 
|  | driver_unregister(&motu_driver.driver); | 
|  | } | 
|  |  | 
|  | module_init(alsa_motu_init); | 
|  | module_exit(alsa_motu_exit); |