|  | /* | 
|  | *   ALSA soundcard driver for Miro miroSOUND PCM1 pro | 
|  | *                                  miroSOUND PCM12 | 
|  | *                                  miroSOUND PCM20 Radio | 
|  | * | 
|  | *   Copyright (C) 2004-2005 Martin Langer <martin-langer@gmx.de> | 
|  | * | 
|  | *   Based on OSS ACI and ALSA OPTi9xx drivers | 
|  | * | 
|  | *   This program is free software; you can redistribute it and/or modify | 
|  | *   it under the terms of the GNU General Public License as published by | 
|  | *   the Free Software Foundation; either version 2 of the License, or | 
|  | *   (at your option) any later version. | 
|  | * | 
|  | *   This program is distributed in the hope that it will be useful, | 
|  | *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *   GNU General Public License for more details. | 
|  | * | 
|  | *   You should have received a copy of the GNU General Public License | 
|  | *   along with this program; if not, write to the Free Software | 
|  | *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/isa.h> | 
|  | #include <linux/pnp.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/io.h> | 
|  | #include <asm/dma.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/wss.h> | 
|  | #include <sound/mpu401.h> | 
|  | #include <sound/opl4.h> | 
|  | #include <sound/control.h> | 
|  | #include <sound/info.h> | 
|  | #define SNDRV_LEGACY_FIND_FREE_IOPORT | 
|  | #define SNDRV_LEGACY_FIND_FREE_IRQ | 
|  | #define SNDRV_LEGACY_FIND_FREE_DMA | 
|  | #include <sound/initval.h> | 
|  | #include <sound/aci.h> | 
|  |  | 
|  | MODULE_AUTHOR("Martin Langer <martin-langer@gmx.de>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Miro miroSOUND PCM1 pro, PCM12, PCM20 Radio"); | 
|  | MODULE_SUPPORTED_DEVICE("{{Miro,miroSOUND PCM1 pro}, " | 
|  | "{Miro,miroSOUND PCM12}, " | 
|  | "{Miro,miroSOUND PCM20 Radio}}"); | 
|  |  | 
|  | static int index = SNDRV_DEFAULT_IDX1;		/* Index 0-MAX */ | 
|  | static char *id = SNDRV_DEFAULT_STR1;		/* ID for this card */ | 
|  | static long port = SNDRV_DEFAULT_PORT1; 	/* 0x530,0xe80,0xf40,0x604 */ | 
|  | static long mpu_port = SNDRV_DEFAULT_PORT1;	/* 0x300,0x310,0x320,0x330 */ | 
|  | static long fm_port = SNDRV_DEFAULT_PORT1;	/* 0x388 */ | 
|  | static int irq = SNDRV_DEFAULT_IRQ1;		/* 5,7,9,10,11 */ | 
|  | static int mpu_irq = SNDRV_DEFAULT_IRQ1;	/* 5,7,9,10 */ | 
|  | static int dma1 = SNDRV_DEFAULT_DMA1;		/* 0,1,3 */ | 
|  | static int dma2 = SNDRV_DEFAULT_DMA1;		/* 0,1,3 */ | 
|  | static int wss; | 
|  | static int ide; | 
|  | #ifdef CONFIG_PNP | 
|  | static bool isapnp = 1;				/* Enable ISA PnP detection */ | 
|  | #endif | 
|  |  | 
|  | module_param(index, int, 0444); | 
|  | MODULE_PARM_DESC(index, "Index value for miro soundcard."); | 
|  | module_param(id, charp, 0444); | 
|  | MODULE_PARM_DESC(id, "ID string for miro soundcard."); | 
|  | module_param_hw(port, long, ioport, 0444); | 
|  | MODULE_PARM_DESC(port, "WSS port # for miro driver."); | 
|  | module_param_hw(mpu_port, long, ioport, 0444); | 
|  | MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver."); | 
|  | module_param_hw(fm_port, long, ioport, 0444); | 
|  | MODULE_PARM_DESC(fm_port, "FM Port # for miro driver."); | 
|  | module_param_hw(irq, int, irq, 0444); | 
|  | MODULE_PARM_DESC(irq, "WSS irq # for miro driver."); | 
|  | module_param_hw(mpu_irq, int, irq, 0444); | 
|  | MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver."); | 
|  | module_param_hw(dma1, int, dma, 0444); | 
|  | MODULE_PARM_DESC(dma1, "1st dma # for miro driver."); | 
|  | module_param_hw(dma2, int, dma, 0444); | 
|  | MODULE_PARM_DESC(dma2, "2nd dma # for miro driver."); | 
|  | module_param(wss, int, 0444); | 
|  | MODULE_PARM_DESC(wss, "wss mode"); | 
|  | module_param(ide, int, 0444); | 
|  | MODULE_PARM_DESC(ide, "enable ide port"); | 
|  | #ifdef CONFIG_PNP | 
|  | module_param(isapnp, bool, 0444); | 
|  | MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard."); | 
|  | #endif | 
|  |  | 
|  | #define OPTi9XX_HW_DETECT	0 | 
|  | #define OPTi9XX_HW_82C928	1 | 
|  | #define OPTi9XX_HW_82C929	2 | 
|  | #define OPTi9XX_HW_82C924	3 | 
|  | #define OPTi9XX_HW_82C925	4 | 
|  | #define OPTi9XX_HW_82C930	5 | 
|  | #define OPTi9XX_HW_82C931	6 | 
|  | #define OPTi9XX_HW_82C933	7 | 
|  | #define OPTi9XX_HW_LAST		OPTi9XX_HW_82C933 | 
|  |  | 
|  | #define OPTi9XX_MC_REG(n)	n | 
|  |  | 
|  | struct snd_miro { | 
|  | unsigned short hardware; | 
|  | unsigned char password; | 
|  | char name[7]; | 
|  |  | 
|  | struct resource *res_mc_base; | 
|  | struct resource *res_aci_port; | 
|  |  | 
|  | unsigned long mc_base; | 
|  | unsigned long mc_base_size; | 
|  | unsigned long pwd_reg; | 
|  |  | 
|  | spinlock_t lock; | 
|  | struct snd_pcm *pcm; | 
|  |  | 
|  | long wss_base; | 
|  | int irq; | 
|  | int dma1; | 
|  | int dma2; | 
|  |  | 
|  | long mpu_port; | 
|  | int mpu_irq; | 
|  |  | 
|  | struct snd_miro_aci *aci; | 
|  | }; | 
|  |  | 
|  | static struct snd_miro_aci aci_device; | 
|  |  | 
|  | static char * snd_opti9xx_names[] = { | 
|  | "unknown", | 
|  | "82C928", "82C929", | 
|  | "82C924", "82C925", | 
|  | "82C930", "82C931", "82C933" | 
|  | }; | 
|  |  | 
|  | static int snd_miro_pnp_is_probed; | 
|  |  | 
|  | #ifdef CONFIG_PNP | 
|  |  | 
|  | static const struct pnp_card_device_id snd_miro_pnpids[] = { | 
|  | /* PCM20 and PCM12 in PnP mode */ | 
|  | { .id = "MIR0924", | 
|  | .devs = { { "MIR0000" }, { "MIR0002" }, { "MIR0005" } }, }, | 
|  | { .id = "" } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pnp_card, snd_miro_pnpids); | 
|  |  | 
|  | #endif	/* CONFIG_PNP */ | 
|  |  | 
|  | /* | 
|  | *  ACI control | 
|  | */ | 
|  |  | 
|  | static int aci_busy_wait(struct snd_miro_aci *aci) | 
|  | { | 
|  | long timeout; | 
|  | unsigned char byte; | 
|  |  | 
|  | for (timeout = 1; timeout <= ACI_MINTIME + 30; timeout++) { | 
|  | byte = inb(aci->aci_port + ACI_REG_BUSY); | 
|  | if ((byte & 1) == 0) { | 
|  | if (timeout >= ACI_MINTIME) | 
|  | snd_printd("aci ready in round %ld.\n", | 
|  | timeout-ACI_MINTIME); | 
|  | return byte; | 
|  | } | 
|  | if (timeout >= ACI_MINTIME) { | 
|  | long out=10*HZ; | 
|  | switch (timeout-ACI_MINTIME) { | 
|  | case 0 ... 9: | 
|  | out /= 10; | 
|  | /* fall through */ | 
|  | case 10 ... 19: | 
|  | out /= 10; | 
|  | /* fall through */ | 
|  | case 20 ... 30: | 
|  | out /= 10; | 
|  | /* fall through */ | 
|  | default: | 
|  | set_current_state(TASK_UNINTERRUPTIBLE); | 
|  | schedule_timeout(out); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | snd_printk(KERN_ERR "aci_busy_wait() time out\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | static inline int aci_write(struct snd_miro_aci *aci, unsigned char byte) | 
|  | { | 
|  | if (aci_busy_wait(aci) >= 0) { | 
|  | outb(byte, aci->aci_port + ACI_REG_COMMAND); | 
|  | return 0; | 
|  | } else { | 
|  | snd_printk(KERN_ERR "aci busy, aci_write(0x%x) stopped.\n", byte); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int aci_read(struct snd_miro_aci *aci) | 
|  | { | 
|  | unsigned char byte; | 
|  |  | 
|  | if (aci_busy_wait(aci) >= 0) { | 
|  | byte = inb(aci->aci_port + ACI_REG_STATUS); | 
|  | return byte; | 
|  | } else { | 
|  | snd_printk(KERN_ERR "aci busy, aci_read() stopped.\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | int snd_aci_cmd(struct snd_miro_aci *aci, int write1, int write2, int write3) | 
|  | { | 
|  | int write[] = {write1, write2, write3}; | 
|  | int value, i; | 
|  |  | 
|  | if (mutex_lock_interruptible(&aci->aci_mutex)) | 
|  | return -EINTR; | 
|  |  | 
|  | for (i=0; i<3; i++) { | 
|  | if (write[i]< 0 || write[i] > 255) | 
|  | break; | 
|  | else { | 
|  | value = aci_write(aci, write[i]); | 
|  | if (value < 0) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | value = aci_read(aci); | 
|  |  | 
|  | out:	mutex_unlock(&aci->aci_mutex); | 
|  | return value; | 
|  | } | 
|  | EXPORT_SYMBOL(snd_aci_cmd); | 
|  |  | 
|  | static int aci_getvalue(struct snd_miro_aci *aci, unsigned char index) | 
|  | { | 
|  | return snd_aci_cmd(aci, ACI_STATUS, index, -1); | 
|  | } | 
|  |  | 
|  | static int aci_setvalue(struct snd_miro_aci *aci, unsigned char index, | 
|  | int value) | 
|  | { | 
|  | return snd_aci_cmd(aci, index, value, -1); | 
|  | } | 
|  |  | 
|  | struct snd_miro_aci *snd_aci_get_aci(void) | 
|  | { | 
|  | if (aci_device.aci_port == 0) | 
|  | return NULL; | 
|  | return &aci_device; | 
|  | } | 
|  | EXPORT_SYMBOL(snd_aci_get_aci); | 
|  |  | 
|  | /* | 
|  | *  MIXER part | 
|  | */ | 
|  |  | 
|  | #define snd_miro_info_capture	snd_ctl_boolean_mono_info | 
|  |  | 
|  | static int snd_miro_get_capture(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | int value; | 
|  |  | 
|  | value = aci_getvalue(miro->aci, ACI_S_GENERAL); | 
|  | if (value < 0) { | 
|  | snd_printk(KERN_ERR "snd_miro_get_capture() failed: %d\n", | 
|  | value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | ucontrol->value.integer.value[0] = value & 0x20; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_put_capture(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | int change, value, error; | 
|  |  | 
|  | value = !(ucontrol->value.integer.value[0]); | 
|  |  | 
|  | error = aci_setvalue(miro->aci, ACI_SET_SOLOMODE, value); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "snd_miro_put_capture() failed: %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | change = (value != miro->aci->aci_solomode); | 
|  | miro->aci->aci_solomode = value; | 
|  |  | 
|  | return change; | 
|  | } | 
|  |  | 
|  | static int snd_miro_info_preamp(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
|  | uinfo->count = 1; | 
|  | uinfo->value.integer.min = 0; | 
|  | uinfo->value.integer.max = 3; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_get_preamp(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | int value; | 
|  |  | 
|  | if (miro->aci->aci_version <= 176) { | 
|  |  | 
|  | /* | 
|  | OSS says it's not readable with versions < 176. | 
|  | But it doesn't work on my card, | 
|  | which is a PCM12 with aci_version = 176. | 
|  | */ | 
|  |  | 
|  | ucontrol->value.integer.value[0] = miro->aci->aci_preamp; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | value = aci_getvalue(miro->aci, ACI_GET_PREAMP); | 
|  | if (value < 0) { | 
|  | snd_printk(KERN_ERR "snd_miro_get_preamp() failed: %d\n", | 
|  | value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | ucontrol->value.integer.value[0] = value; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_put_preamp(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | int error, value, change; | 
|  |  | 
|  | value = ucontrol->value.integer.value[0]; | 
|  |  | 
|  | error = aci_setvalue(miro->aci, ACI_SET_PREAMP, value); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "snd_miro_put_preamp() failed: %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | change = (value != miro->aci->aci_preamp); | 
|  | miro->aci->aci_preamp = value; | 
|  |  | 
|  | return change; | 
|  | } | 
|  |  | 
|  | #define snd_miro_info_amp	snd_ctl_boolean_mono_info | 
|  |  | 
|  | static int snd_miro_get_amp(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | ucontrol->value.integer.value[0] = miro->aci->aci_amp; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_put_amp(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | int error, value, change; | 
|  |  | 
|  | value = ucontrol->value.integer.value[0]; | 
|  |  | 
|  | error = aci_setvalue(miro->aci, ACI_SET_POWERAMP, value); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "snd_miro_put_amp() to %d failed: %d\n", value, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | change = (value != miro->aci->aci_amp); | 
|  | miro->aci->aci_amp = value; | 
|  |  | 
|  | return change; | 
|  | } | 
|  |  | 
|  | #define MIRO_DOUBLE(ctl_name, ctl_index, get_right_reg, set_right_reg) \ | 
|  | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ | 
|  | .name = ctl_name, \ | 
|  | .index = ctl_index, \ | 
|  | .info = snd_miro_info_double, \ | 
|  | .get = snd_miro_get_double, \ | 
|  | .put = snd_miro_put_double, \ | 
|  | .private_value = get_right_reg | (set_right_reg << 8) \ | 
|  | } | 
|  |  | 
|  | static int snd_miro_info_double(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | int reg = kcontrol->private_value & 0xff; | 
|  |  | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | 
|  | uinfo->count = 2; | 
|  |  | 
|  | if ((reg >= ACI_GET_EQ1) && (reg <= ACI_GET_EQ7)) { | 
|  |  | 
|  | /* equalizer elements */ | 
|  |  | 
|  | uinfo->value.integer.min = - 0x7f; | 
|  | uinfo->value.integer.max = 0x7f; | 
|  | } else { | 
|  |  | 
|  | /* non-equalizer elements */ | 
|  |  | 
|  | uinfo->value.integer.min = 0; | 
|  | uinfo->value.integer.max = 0x20; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_get_double(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *uinfo) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | int left_val, right_val; | 
|  |  | 
|  | int right_reg = kcontrol->private_value & 0xff; | 
|  | int left_reg = right_reg + 1; | 
|  |  | 
|  | right_val = aci_getvalue(miro->aci, right_reg); | 
|  | if (right_val < 0) { | 
|  | snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", right_reg, right_val); | 
|  | return right_val; | 
|  | } | 
|  |  | 
|  | left_val = aci_getvalue(miro->aci, left_reg); | 
|  | if (left_val < 0) { | 
|  | snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", left_reg, left_val); | 
|  | return left_val; | 
|  | } | 
|  |  | 
|  | if ((right_reg >= ACI_GET_EQ1) && (right_reg <= ACI_GET_EQ7)) { | 
|  |  | 
|  | /* equalizer elements */ | 
|  |  | 
|  | if (left_val < 0x80) { | 
|  | uinfo->value.integer.value[0] = left_val; | 
|  | } else { | 
|  | uinfo->value.integer.value[0] = 0x80 - left_val; | 
|  | } | 
|  |  | 
|  | if (right_val < 0x80) { | 
|  | uinfo->value.integer.value[1] = right_val; | 
|  | } else { | 
|  | uinfo->value.integer.value[1] = 0x80 - right_val; | 
|  | } | 
|  |  | 
|  | } else { | 
|  |  | 
|  | /* non-equalizer elements */ | 
|  |  | 
|  | uinfo->value.integer.value[0] = 0x20 - left_val; | 
|  | uinfo->value.integer.value[1] = 0x20 - right_val; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_put_double(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | 
|  | struct snd_miro_aci *aci = miro->aci; | 
|  | int left, right, left_old, right_old; | 
|  | int setreg_left, setreg_right, getreg_left, getreg_right; | 
|  | int change, error; | 
|  |  | 
|  | left = ucontrol->value.integer.value[0]; | 
|  | right = ucontrol->value.integer.value[1]; | 
|  |  | 
|  | setreg_right = (kcontrol->private_value >> 8) & 0xff; | 
|  | setreg_left = setreg_right + 8; | 
|  | if (setreg_right == ACI_SET_MASTER) | 
|  | setreg_left -= 7; | 
|  |  | 
|  | getreg_right = kcontrol->private_value & 0xff; | 
|  | getreg_left = getreg_right + 1; | 
|  |  | 
|  | left_old = aci_getvalue(aci, getreg_left); | 
|  | if (left_old < 0) { | 
|  | snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_left, left_old); | 
|  | return left_old; | 
|  | } | 
|  |  | 
|  | right_old = aci_getvalue(aci, getreg_right); | 
|  | if (right_old < 0) { | 
|  | snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_right, right_old); | 
|  | return right_old; | 
|  | } | 
|  |  | 
|  | if ((getreg_right >= ACI_GET_EQ1) && (getreg_right <= ACI_GET_EQ7)) { | 
|  |  | 
|  | /* equalizer elements */ | 
|  |  | 
|  | if (left < -0x7f || left > 0x7f || | 
|  | right < -0x7f || right > 0x7f) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (left_old > 0x80) | 
|  | left_old = 0x80 - left_old; | 
|  | if (right_old > 0x80) | 
|  | right_old = 0x80 - right_old; | 
|  |  | 
|  | if (left >= 0) { | 
|  | error = aci_setvalue(aci, setreg_left, left); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | left, error); | 
|  | return error; | 
|  | } | 
|  | } else { | 
|  | error = aci_setvalue(aci, setreg_left, 0x80 - left); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | 0x80 - left, error); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (right >= 0) { | 
|  | error = aci_setvalue(aci, setreg_right, right); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | right, error); | 
|  | return error; | 
|  | } | 
|  | } else { | 
|  | error = aci_setvalue(aci, setreg_right, 0x80 - right); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | 0x80 - right, error); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | } else { | 
|  |  | 
|  | /* non-equalizer elements */ | 
|  |  | 
|  | if (left < 0 || left > 0x20 || | 
|  | right < 0 || right > 0x20) | 
|  | return -EINVAL; | 
|  |  | 
|  | left_old = 0x20 - left_old; | 
|  | right_old = 0x20 - right_old; | 
|  |  | 
|  | error = aci_setvalue(aci, setreg_left, 0x20 - left); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | 0x20 - left, error); | 
|  | return error; | 
|  | } | 
|  | error = aci_setvalue(aci, setreg_right, 0x20 - right); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | 0x20 - right, error); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | change = (left != left_old) || (right != right_old); | 
|  |  | 
|  | return change; | 
|  | } | 
|  |  | 
|  | static struct snd_kcontrol_new snd_miro_controls[] = { | 
|  | MIRO_DOUBLE("Master Playback Volume", 0, ACI_GET_MASTER, ACI_SET_MASTER), | 
|  | MIRO_DOUBLE("Mic Playback Volume", 1, ACI_GET_MIC, ACI_SET_MIC), | 
|  | MIRO_DOUBLE("Line Playback Volume", 1, ACI_GET_LINE, ACI_SET_LINE), | 
|  | MIRO_DOUBLE("CD Playback Volume", 0, ACI_GET_CD, ACI_SET_CD), | 
|  | MIRO_DOUBLE("Synth Playback Volume", 0, ACI_GET_SYNTH, ACI_SET_SYNTH), | 
|  | MIRO_DOUBLE("PCM Playback Volume", 1, ACI_GET_PCM, ACI_SET_PCM), | 
|  | MIRO_DOUBLE("Aux Playback Volume", 2, ACI_GET_LINE2, ACI_SET_LINE2), | 
|  | }; | 
|  |  | 
|  | /* Equalizer with seven bands (only PCM20) | 
|  | from -12dB up to +12dB on each band */ | 
|  | static struct snd_kcontrol_new snd_miro_eq_controls[] = { | 
|  | MIRO_DOUBLE("Tone Control - 28 Hz", 0, ACI_GET_EQ1, ACI_SET_EQ1), | 
|  | MIRO_DOUBLE("Tone Control - 160 Hz", 0, ACI_GET_EQ2, ACI_SET_EQ2), | 
|  | MIRO_DOUBLE("Tone Control - 400 Hz", 0, ACI_GET_EQ3, ACI_SET_EQ3), | 
|  | MIRO_DOUBLE("Tone Control - 1 kHz", 0, ACI_GET_EQ4, ACI_SET_EQ4), | 
|  | MIRO_DOUBLE("Tone Control - 2.5 kHz", 0, ACI_GET_EQ5, ACI_SET_EQ5), | 
|  | MIRO_DOUBLE("Tone Control - 6.3 kHz", 0, ACI_GET_EQ6, ACI_SET_EQ6), | 
|  | MIRO_DOUBLE("Tone Control - 16 kHz", 0, ACI_GET_EQ7, ACI_SET_EQ7), | 
|  | }; | 
|  |  | 
|  | static struct snd_kcontrol_new snd_miro_radio_control[] = { | 
|  | MIRO_DOUBLE("Radio Playback Volume", 0, ACI_GET_LINE1, ACI_SET_LINE1), | 
|  | }; | 
|  |  | 
|  | static struct snd_kcontrol_new snd_miro_line_control[] = { | 
|  | MIRO_DOUBLE("Line Playback Volume", 2, ACI_GET_LINE1, ACI_SET_LINE1), | 
|  | }; | 
|  |  | 
|  | static struct snd_kcontrol_new snd_miro_preamp_control[] = { | 
|  | { | 
|  | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
|  | .name = "Mic Boost", | 
|  | .index = 1, | 
|  | .info = snd_miro_info_preamp, | 
|  | .get = snd_miro_get_preamp, | 
|  | .put = snd_miro_put_preamp, | 
|  | }}; | 
|  |  | 
|  | static struct snd_kcontrol_new snd_miro_amp_control[] = { | 
|  | { | 
|  | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
|  | .name = "Line Boost", | 
|  | .index = 0, | 
|  | .info = snd_miro_info_amp, | 
|  | .get = snd_miro_get_amp, | 
|  | .put = snd_miro_put_amp, | 
|  | }}; | 
|  |  | 
|  | static struct snd_kcontrol_new snd_miro_capture_control[] = { | 
|  | { | 
|  | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | 
|  | .name = "PCM Capture Switch", | 
|  | .index = 0, | 
|  | .info = snd_miro_info_capture, | 
|  | .get = snd_miro_get_capture, | 
|  | .put = snd_miro_put_capture, | 
|  | }}; | 
|  |  | 
|  | static unsigned char aci_init_values[][2] = { | 
|  | { ACI_SET_MUTE, 0x00 }, | 
|  | { ACI_SET_POWERAMP, 0x00 }, | 
|  | { ACI_SET_PREAMP, 0x00 }, | 
|  | { ACI_SET_SOLOMODE, 0x00 }, | 
|  | { ACI_SET_MIC + 0, 0x20 }, | 
|  | { ACI_SET_MIC + 8, 0x20 }, | 
|  | { ACI_SET_LINE + 0, 0x20 }, | 
|  | { ACI_SET_LINE + 8, 0x20 }, | 
|  | { ACI_SET_CD + 0, 0x20 }, | 
|  | { ACI_SET_CD + 8, 0x20 }, | 
|  | { ACI_SET_PCM + 0, 0x20 }, | 
|  | { ACI_SET_PCM + 8, 0x20 }, | 
|  | { ACI_SET_LINE1 + 0, 0x20 }, | 
|  | { ACI_SET_LINE1 + 8, 0x20 }, | 
|  | { ACI_SET_LINE2 + 0, 0x20 }, | 
|  | { ACI_SET_LINE2 + 8, 0x20 }, | 
|  | { ACI_SET_SYNTH + 0, 0x20 }, | 
|  | { ACI_SET_SYNTH + 8, 0x20 }, | 
|  | { ACI_SET_MASTER + 0, 0x20 }, | 
|  | { ACI_SET_MASTER + 1, 0x20 }, | 
|  | }; | 
|  |  | 
|  | static int snd_set_aci_init_values(struct snd_miro *miro) | 
|  | { | 
|  | int idx, error; | 
|  | struct snd_miro_aci *aci = miro->aci; | 
|  |  | 
|  | /* enable WSS on PCM1 */ | 
|  |  | 
|  | if ((aci->aci_product == 'A') && wss) { | 
|  | error = aci_setvalue(aci, ACI_SET_WSS, wss); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "enabling WSS mode failed\n"); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* enable IDE port */ | 
|  |  | 
|  | if (ide) { | 
|  | error = aci_setvalue(aci, ACI_SET_IDE, ide); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "enabling IDE port failed\n"); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* set common aci values */ | 
|  |  | 
|  | for (idx = 0; idx < ARRAY_SIZE(aci_init_values); idx++) { | 
|  | error = aci_setvalue(aci, aci_init_values[idx][0], | 
|  | aci_init_values[idx][1]); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | 
|  | aci_init_values[idx][0], error); | 
|  | return error; | 
|  | } | 
|  | } | 
|  | aci->aci_amp = 0; | 
|  | aci->aci_preamp = 0; | 
|  | aci->aci_solomode = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_mixer(struct snd_card *card, | 
|  | struct snd_miro *miro) | 
|  | { | 
|  | unsigned int idx; | 
|  | int err; | 
|  |  | 
|  | if (snd_BUG_ON(!miro || !card)) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (miro->hardware) { | 
|  | case OPTi9XX_HW_82C924: | 
|  | strcpy(card->mixername, "ACI & OPTi924"); | 
|  | break; | 
|  | case OPTi9XX_HW_82C929: | 
|  | strcpy(card->mixername, "ACI & OPTi929"); | 
|  | break; | 
|  | default: | 
|  | snd_BUG(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | for (idx = 0; idx < ARRAY_SIZE(snd_miro_controls); idx++) { | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_controls[idx], miro))) < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if ((miro->aci->aci_product == 'A') || | 
|  | (miro->aci->aci_product == 'B')) { | 
|  | /* PCM1/PCM12 with power-amp and Line 2 */ | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_line_control[0], miro))) < 0) | 
|  | return err; | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_amp_control[0], miro))) < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if ((miro->aci->aci_product == 'B') || | 
|  | (miro->aci->aci_product == 'C')) { | 
|  | /* PCM12/PCM20 with mic-preamp */ | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_preamp_control[0], miro))) < 0) | 
|  | return err; | 
|  | if (miro->aci->aci_version >= 176) | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_capture_control[0], miro))) < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (miro->aci->aci_product == 'C') { | 
|  | /* PCM20 with radio and 7 band equalizer */ | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_radio_control[0], miro))) < 0) | 
|  | return err; | 
|  | for (idx = 0; idx < ARRAY_SIZE(snd_miro_eq_controls); idx++) { | 
|  | if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_eq_controls[idx], miro))) < 0) | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_init(struct snd_miro *chip, | 
|  | unsigned short hardware) | 
|  | { | 
|  | static int opti9xx_mc_size[] = {7, 7, 10, 10, 2, 2, 2}; | 
|  |  | 
|  | chip->hardware = hardware; | 
|  | strcpy(chip->name, snd_opti9xx_names[hardware]); | 
|  |  | 
|  | chip->mc_base_size = opti9xx_mc_size[hardware]; | 
|  |  | 
|  | spin_lock_init(&chip->lock); | 
|  |  | 
|  | chip->wss_base = -1; | 
|  | chip->irq = -1; | 
|  | chip->dma1 = -1; | 
|  | chip->dma2 = -1; | 
|  | chip->mpu_port = -1; | 
|  | chip->mpu_irq = -1; | 
|  |  | 
|  | chip->pwd_reg = 3; | 
|  |  | 
|  | #ifdef CONFIG_PNP | 
|  | if (isapnp && chip->mc_base) | 
|  | /* PnP resource gives the least 10 bits */ | 
|  | chip->mc_base |= 0xc00; | 
|  | else | 
|  | #endif | 
|  | chip->mc_base = 0xf8c; | 
|  |  | 
|  | switch (hardware) { | 
|  | case OPTi9XX_HW_82C929: | 
|  | chip->password = 0xe3; | 
|  | break; | 
|  |  | 
|  | case OPTi9XX_HW_82C924: | 
|  | chip->password = 0xe5; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | snd_printk(KERN_ERR "sorry, no support for %d\n", hardware); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned char snd_miro_read(struct snd_miro *chip, | 
|  | unsigned char reg) | 
|  | { | 
|  | unsigned long flags; | 
|  | unsigned char retval = 0xff; | 
|  |  | 
|  | spin_lock_irqsave(&chip->lock, flags); | 
|  | outb(chip->password, chip->mc_base + chip->pwd_reg); | 
|  |  | 
|  | switch (chip->hardware) { | 
|  | case OPTi9XX_HW_82C924: | 
|  | if (reg > 7) { | 
|  | outb(reg, chip->mc_base + 8); | 
|  | outb(chip->password, chip->mc_base + chip->pwd_reg); | 
|  | retval = inb(chip->mc_base + 9); | 
|  | break; | 
|  | } | 
|  | /* fall through */ | 
|  |  | 
|  | case OPTi9XX_HW_82C929: | 
|  | retval = inb(chip->mc_base + reg); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | snd_printk(KERN_ERR "sorry, no support for %d\n", chip->hardware); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&chip->lock, flags); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void snd_miro_write(struct snd_miro *chip, unsigned char reg, | 
|  | unsigned char value) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&chip->lock, flags); | 
|  | outb(chip->password, chip->mc_base + chip->pwd_reg); | 
|  |  | 
|  | switch (chip->hardware) { | 
|  | case OPTi9XX_HW_82C924: | 
|  | if (reg > 7) { | 
|  | outb(reg, chip->mc_base + 8); | 
|  | outb(chip->password, chip->mc_base + chip->pwd_reg); | 
|  | outb(value, chip->mc_base + 9); | 
|  | break; | 
|  | } | 
|  | /* fall through */ | 
|  |  | 
|  | case OPTi9XX_HW_82C929: | 
|  | outb(value, chip->mc_base + reg); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | snd_printk(KERN_ERR "sorry, no support for %d\n", chip->hardware); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&chip->lock, flags); | 
|  | } | 
|  |  | 
|  |  | 
|  | #define snd_miro_write_mask(chip, reg, value, mask)	\ | 
|  | snd_miro_write(chip, reg,			\ | 
|  | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | 
|  |  | 
|  | /* | 
|  | *  Proc Interface | 
|  | */ | 
|  |  | 
|  | static void snd_miro_proc_read(struct snd_info_entry * entry, | 
|  | struct snd_info_buffer *buffer) | 
|  | { | 
|  | struct snd_miro *miro = (struct snd_miro *) entry->private_data; | 
|  | struct snd_miro_aci *aci = miro->aci; | 
|  | char* model = "unknown"; | 
|  |  | 
|  | /* miroSOUND PCM1 pro, early PCM12 */ | 
|  |  | 
|  | if ((miro->hardware == OPTi9XX_HW_82C929) && | 
|  | (aci->aci_vendor == 'm') && | 
|  | (aci->aci_product == 'A')) { | 
|  | switch (aci->aci_version) { | 
|  | case 3: | 
|  | model = "miroSOUND PCM1 pro"; | 
|  | break; | 
|  | default: | 
|  | model = "miroSOUND PCM1 pro / (early) PCM12"; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* miroSOUND PCM12, PCM12 (Rev. E), PCM12 pnp */ | 
|  |  | 
|  | if ((miro->hardware == OPTi9XX_HW_82C924) && | 
|  | (aci->aci_vendor == 'm') && | 
|  | (aci->aci_product == 'B')) { | 
|  | switch (aci->aci_version) { | 
|  | case 4: | 
|  | model = "miroSOUND PCM12"; | 
|  | break; | 
|  | case 176: | 
|  | model = "miroSOUND PCM12 (Rev. E)"; | 
|  | break; | 
|  | default: | 
|  | model = "miroSOUND PCM12 / PCM12 pnp"; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* miroSOUND PCM20 radio */ | 
|  |  | 
|  | if ((miro->hardware == OPTi9XX_HW_82C924) && | 
|  | (aci->aci_vendor == 'm') && | 
|  | (aci->aci_product == 'C')) { | 
|  | switch (aci->aci_version) { | 
|  | case 7: | 
|  | model = "miroSOUND PCM20 radio (Rev. E)"; | 
|  | break; | 
|  | default: | 
|  | model = "miroSOUND PCM20 radio"; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | snd_iprintf(buffer, "\nGeneral information:\n"); | 
|  | snd_iprintf(buffer, "  model   : %s\n", model); | 
|  | snd_iprintf(buffer, "  opti    : %s\n", miro->name); | 
|  | snd_iprintf(buffer, "  codec   : %s\n", miro->pcm->name); | 
|  | snd_iprintf(buffer, "  port    : 0x%lx\n", miro->wss_base); | 
|  | snd_iprintf(buffer, "  irq     : %d\n", miro->irq); | 
|  | snd_iprintf(buffer, "  dma     : %d,%d\n\n", miro->dma1, miro->dma2); | 
|  |  | 
|  | snd_iprintf(buffer, "MPU-401:\n"); | 
|  | snd_iprintf(buffer, "  port    : 0x%lx\n", miro->mpu_port); | 
|  | snd_iprintf(buffer, "  irq     : %d\n\n", miro->mpu_irq); | 
|  |  | 
|  | snd_iprintf(buffer, "ACI information:\n"); | 
|  | snd_iprintf(buffer, "  vendor  : "); | 
|  | switch (aci->aci_vendor) { | 
|  | case 'm': | 
|  | snd_iprintf(buffer, "Miro\n"); | 
|  | break; | 
|  | default: | 
|  | snd_iprintf(buffer, "unknown (0x%x)\n", aci->aci_vendor); | 
|  | break; | 
|  | } | 
|  |  | 
|  | snd_iprintf(buffer, "  product : "); | 
|  | switch (aci->aci_product) { | 
|  | case 'A': | 
|  | snd_iprintf(buffer, "miroSOUND PCM1 pro / (early) PCM12\n"); | 
|  | break; | 
|  | case 'B': | 
|  | snd_iprintf(buffer, "miroSOUND PCM12\n"); | 
|  | break; | 
|  | case 'C': | 
|  | snd_iprintf(buffer, "miroSOUND PCM20 radio\n"); | 
|  | break; | 
|  | default: | 
|  | snd_iprintf(buffer, "unknown (0x%x)\n", aci->aci_product); | 
|  | break; | 
|  | } | 
|  |  | 
|  | snd_iprintf(buffer, "  firmware: %d (0x%x)\n", | 
|  | aci->aci_version, aci->aci_version); | 
|  | snd_iprintf(buffer, "  port    : 0x%lx-0x%lx\n", | 
|  | aci->aci_port, aci->aci_port+2); | 
|  | snd_iprintf(buffer, "  wss     : 0x%x\n", wss); | 
|  | snd_iprintf(buffer, "  ide     : 0x%x\n", ide); | 
|  | snd_iprintf(buffer, "  solomode: 0x%x\n", aci->aci_solomode); | 
|  | snd_iprintf(buffer, "  amp     : 0x%x\n", aci->aci_amp); | 
|  | snd_iprintf(buffer, "  preamp  : 0x%x\n", aci->aci_preamp); | 
|  | } | 
|  |  | 
|  | static void snd_miro_proc_init(struct snd_card *card, | 
|  | struct snd_miro *miro) | 
|  | { | 
|  | struct snd_info_entry *entry; | 
|  |  | 
|  | if (!snd_card_proc_new(card, "miro", &entry)) | 
|  | snd_info_set_text_ops(entry, miro, snd_miro_proc_read); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  Init | 
|  | */ | 
|  |  | 
|  | static int snd_miro_configure(struct snd_miro *chip) | 
|  | { | 
|  | unsigned char wss_base_bits; | 
|  | unsigned char irq_bits; | 
|  | unsigned char dma_bits; | 
|  | unsigned char mpu_port_bits = 0; | 
|  | unsigned char mpu_irq_bits; | 
|  | unsigned long flags; | 
|  |  | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80); | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */ | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02); | 
|  |  | 
|  | switch (chip->hardware) { | 
|  | case OPTi9XX_HW_82C924: | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02); | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | 
|  | break; | 
|  | case OPTi9XX_HW_82C929: | 
|  | /* untested init commands for OPTi929 */ | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(4), 0x00, 0x0c); | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* PnP resource says it decodes only 10 bits of address */ | 
|  | switch (chip->wss_base & 0x3ff) { | 
|  | case 0x130: | 
|  | chip->wss_base = 0x530; | 
|  | wss_base_bits = 0x00; | 
|  | break; | 
|  | case 0x204: | 
|  | chip->wss_base = 0x604; | 
|  | wss_base_bits = 0x03; | 
|  | break; | 
|  | case 0x280: | 
|  | chip->wss_base = 0xe80; | 
|  | wss_base_bits = 0x01; | 
|  | break; | 
|  | case 0x340: | 
|  | chip->wss_base = 0xf40; | 
|  | wss_base_bits = 0x02; | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "WSS port 0x%lx not valid\n", chip->wss_base); | 
|  | goto __skip_base; | 
|  | } | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30); | 
|  |  | 
|  | __skip_base: | 
|  | switch (chip->irq) { | 
|  | case 5: | 
|  | irq_bits = 0x05; | 
|  | break; | 
|  | case 7: | 
|  | irq_bits = 0x01; | 
|  | break; | 
|  | case 9: | 
|  | irq_bits = 0x02; | 
|  | break; | 
|  | case 10: | 
|  | irq_bits = 0x03; | 
|  | break; | 
|  | case 11: | 
|  | irq_bits = 0x04; | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "WSS irq # %d not valid\n", chip->irq); | 
|  | goto __skip_resources; | 
|  | } | 
|  |  | 
|  | switch (chip->dma1) { | 
|  | case 0: | 
|  | dma_bits = 0x01; | 
|  | break; | 
|  | case 1: | 
|  | dma_bits = 0x02; | 
|  | break; | 
|  | case 3: | 
|  | dma_bits = 0x03; | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "WSS dma1 # %d not valid\n", chip->dma1); | 
|  | goto __skip_resources; | 
|  | } | 
|  |  | 
|  | if (chip->dma1 == chip->dma2) { | 
|  | snd_printk(KERN_ERR "don't want to share dmas\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | switch (chip->dma2) { | 
|  | case 0: | 
|  | case 1: | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "WSS dma2 # %d not valid\n", chip->dma2); | 
|  | goto __skip_resources; | 
|  | } | 
|  | dma_bits |= 0x04; | 
|  |  | 
|  | spin_lock_irqsave(&chip->lock, flags); | 
|  | outb(irq_bits << 3 | dma_bits, chip->wss_base); | 
|  | spin_unlock_irqrestore(&chip->lock, flags); | 
|  |  | 
|  | __skip_resources: | 
|  | if (chip->hardware > OPTi9XX_HW_82C928) { | 
|  | switch (chip->mpu_port) { | 
|  | case 0: | 
|  | case -1: | 
|  | break; | 
|  | case 0x300: | 
|  | mpu_port_bits = 0x03; | 
|  | break; | 
|  | case 0x310: | 
|  | mpu_port_bits = 0x02; | 
|  | break; | 
|  | case 0x320: | 
|  | mpu_port_bits = 0x01; | 
|  | break; | 
|  | case 0x330: | 
|  | mpu_port_bits = 0x00; | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "MPU-401 port 0x%lx not valid\n", | 
|  | chip->mpu_port); | 
|  | goto __skip_mpu; | 
|  | } | 
|  |  | 
|  | switch (chip->mpu_irq) { | 
|  | case 5: | 
|  | mpu_irq_bits = 0x02; | 
|  | break; | 
|  | case 7: | 
|  | mpu_irq_bits = 0x03; | 
|  | break; | 
|  | case 9: | 
|  | mpu_irq_bits = 0x00; | 
|  | break; | 
|  | case 10: | 
|  | mpu_irq_bits = 0x01; | 
|  | break; | 
|  | default: | 
|  | snd_printk(KERN_ERR "MPU-401 irq # %d not valid\n", | 
|  | chip->mpu_irq); | 
|  | goto __skip_mpu; | 
|  | } | 
|  |  | 
|  | snd_miro_write_mask(chip, OPTi9XX_MC_REG(6), | 
|  | (chip->mpu_port <= 0) ? 0x00 : | 
|  | 0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3, | 
|  | 0xf8); | 
|  | } | 
|  | __skip_mpu: | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_opti_check(struct snd_miro *chip) | 
|  | { | 
|  | unsigned char value; | 
|  |  | 
|  | chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size, | 
|  | "OPTi9xx MC"); | 
|  | if (chip->res_mc_base == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | value = snd_miro_read(chip, OPTi9XX_MC_REG(1)); | 
|  | if (value != 0xff && value != inb(chip->mc_base + OPTi9XX_MC_REG(1))) | 
|  | if (value == snd_miro_read(chip, OPTi9XX_MC_REG(1))) | 
|  | return 0; | 
|  |  | 
|  | release_and_free_resource(chip->res_mc_base); | 
|  | chip->res_mc_base = NULL; | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int snd_card_miro_detect(struct snd_card *card, | 
|  | struct snd_miro *chip) | 
|  | { | 
|  | int i, err; | 
|  |  | 
|  | for (i = OPTi9XX_HW_82C929; i <= OPTi9XX_HW_82C924; i++) { | 
|  |  | 
|  | if ((err = snd_miro_init(chip, i)) < 0) | 
|  | return err; | 
|  |  | 
|  | err = snd_miro_opti_check(chip); | 
|  | if (err == 0) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int snd_card_miro_aci_detect(struct snd_card *card, | 
|  | struct snd_miro *miro) | 
|  | { | 
|  | unsigned char regval; | 
|  | int i; | 
|  | struct snd_miro_aci *aci = &aci_device; | 
|  |  | 
|  | miro->aci = aci; | 
|  |  | 
|  | mutex_init(&aci->aci_mutex); | 
|  |  | 
|  | /* get ACI port from OPTi9xx MC 4 */ | 
|  |  | 
|  | regval=inb(miro->mc_base + 4); | 
|  | aci->aci_port = (regval & 0x10) ? 0x344 : 0x354; | 
|  |  | 
|  | miro->res_aci_port = request_region(aci->aci_port, 3, "miro aci"); | 
|  | if (miro->res_aci_port == NULL) { | 
|  | snd_printk(KERN_ERR "aci i/o area 0x%lx-0x%lx already used.\n", | 
|  | aci->aci_port, aci->aci_port+2); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* force ACI into a known state */ | 
|  | for (i = 0; i < 3; i++) | 
|  | if (snd_aci_cmd(aci, ACI_ERROR_OP, -1, -1) < 0) { | 
|  | snd_printk(KERN_ERR "can't force aci into known state.\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | aci->aci_vendor = snd_aci_cmd(aci, ACI_READ_IDCODE, -1, -1); | 
|  | aci->aci_product = snd_aci_cmd(aci, ACI_READ_IDCODE, -1, -1); | 
|  | if (aci->aci_vendor < 0 || aci->aci_product < 0) { | 
|  | snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n", | 
|  | aci->aci_port); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | aci->aci_version = snd_aci_cmd(aci, ACI_READ_VERSION, -1, -1); | 
|  | if (aci->aci_version < 0) { | 
|  | snd_printk(KERN_ERR "can't read aci version on 0x%lx.\n", | 
|  | aci->aci_port); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | if (snd_aci_cmd(aci, ACI_INIT, -1, -1) < 0 || | 
|  | snd_aci_cmd(aci, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0 || | 
|  | snd_aci_cmd(aci, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0) { | 
|  | snd_printk(KERN_ERR "can't initialize aci.\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void snd_card_miro_free(struct snd_card *card) | 
|  | { | 
|  | struct snd_miro *miro = card->private_data; | 
|  |  | 
|  | release_and_free_resource(miro->res_aci_port); | 
|  | if (miro->aci) | 
|  | miro->aci->aci_port = 0; | 
|  | release_and_free_resource(miro->res_mc_base); | 
|  | } | 
|  |  | 
|  | static int snd_miro_probe(struct snd_card *card) | 
|  | { | 
|  | int error; | 
|  | struct snd_miro *miro = card->private_data; | 
|  | struct snd_wss *codec; | 
|  | struct snd_rawmidi *rmidi; | 
|  |  | 
|  | if (!miro->res_mc_base) { | 
|  | miro->res_mc_base = request_region(miro->mc_base, | 
|  | miro->mc_base_size, | 
|  | "miro (OPTi9xx MC)"); | 
|  | if (miro->res_mc_base == NULL) { | 
|  | snd_printk(KERN_ERR "request for OPTI9xx MC failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | error = snd_card_miro_aci_detect(card, miro); | 
|  | if (error < 0) { | 
|  | snd_printk(KERN_ERR "unable to detect aci chip\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | miro->wss_base = port; | 
|  | miro->mpu_port = mpu_port; | 
|  | miro->irq = irq; | 
|  | miro->mpu_irq = mpu_irq; | 
|  | miro->dma1 = dma1; | 
|  | miro->dma2 = dma2; | 
|  |  | 
|  | /* init proc interface */ | 
|  | snd_miro_proc_init(card, miro); | 
|  |  | 
|  | error = snd_miro_configure(miro); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | error = snd_wss_create(card, miro->wss_base + 4, -1, | 
|  | miro->irq, miro->dma1, miro->dma2, | 
|  | WSS_HW_DETECT, 0, &codec); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | error = snd_wss_pcm(codec, 0); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | error = snd_wss_mixer(codec); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | error = snd_wss_timer(codec, 0); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | miro->pcm = codec->pcm; | 
|  |  | 
|  | error = snd_miro_mixer(card, miro); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | if (miro->aci->aci_vendor == 'm') { | 
|  | /* It looks like a miro sound card. */ | 
|  | switch (miro->aci->aci_product) { | 
|  | case 'A': | 
|  | sprintf(card->shortname, | 
|  | "miroSOUND PCM1 pro / PCM12"); | 
|  | break; | 
|  | case 'B': | 
|  | sprintf(card->shortname, | 
|  | "miroSOUND PCM12"); | 
|  | break; | 
|  | case 'C': | 
|  | sprintf(card->shortname, | 
|  | "miroSOUND PCM20 radio"); | 
|  | break; | 
|  | default: | 
|  | sprintf(card->shortname, | 
|  | "unknown miro"); | 
|  | snd_printk(KERN_INFO "unknown miro aci id\n"); | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | snd_printk(KERN_INFO "found unsupported aci card\n"); | 
|  | sprintf(card->shortname, "unknown Cardinal Technologies"); | 
|  | } | 
|  |  | 
|  | strcpy(card->driver, "miro"); | 
|  | snprintf(card->longname, sizeof(card->longname), | 
|  | "%s: OPTi%s, %s at 0x%lx, irq %d, dma %d&%d", | 
|  | card->shortname, miro->name, codec->pcm->name, | 
|  | miro->wss_base + 4, miro->irq, miro->dma1, miro->dma2); | 
|  |  | 
|  | if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT) | 
|  | rmidi = NULL; | 
|  | else { | 
|  | error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, | 
|  | mpu_port, 0, miro->mpu_irq, &rmidi); | 
|  | if (error < 0) | 
|  | snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", | 
|  | mpu_port); | 
|  | } | 
|  |  | 
|  | if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) { | 
|  | struct snd_opl3 *opl3 = NULL; | 
|  | struct snd_opl4 *opl4; | 
|  |  | 
|  | if (snd_opl4_create(card, fm_port, fm_port - 8, | 
|  | 2, &opl3, &opl4) < 0) | 
|  | snd_printk(KERN_WARNING "no OPL4 device at 0x%lx\n", | 
|  | fm_port); | 
|  | } | 
|  |  | 
|  | error = snd_set_aci_init_values(miro); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | return snd_card_register(card); | 
|  | } | 
|  |  | 
|  | static int snd_miro_isa_match(struct device *devptr, unsigned int n) | 
|  | { | 
|  | #ifdef CONFIG_PNP | 
|  | if (snd_miro_pnp_is_probed) | 
|  | return 0; | 
|  | if (isapnp) | 
|  | return 0; | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int snd_miro_isa_probe(struct device *devptr, unsigned int n) | 
|  | { | 
|  | static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1}; | 
|  | static long possible_mpu_ports[] = {0x330, 0x300, 0x310, 0x320, -1}; | 
|  | static int possible_irqs[] = {11, 9, 10, 7, -1}; | 
|  | static int possible_mpu_irqs[] = {10, 5, 9, 7, -1}; | 
|  | static int possible_dma1s[] = {3, 1, 0, -1}; | 
|  | static int possible_dma2s[][2] = { {1, -1}, {0, -1}, {-1, -1}, | 
|  | {0, -1} }; | 
|  |  | 
|  | int error; | 
|  | struct snd_miro *miro; | 
|  | struct snd_card *card; | 
|  |  | 
|  | error = snd_card_new(devptr, index, id, THIS_MODULE, | 
|  | sizeof(struct snd_miro), &card); | 
|  | if (error < 0) | 
|  | return error; | 
|  |  | 
|  | card->private_free = snd_card_miro_free; | 
|  | miro = card->private_data; | 
|  |  | 
|  | error = snd_card_miro_detect(card, miro); | 
|  | if (error < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR "unable to detect OPTi9xx chip\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (port == SNDRV_AUTO_PORT) { | 
|  | port = snd_legacy_find_free_ioport(possible_ports, 4); | 
|  | if (port < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR "unable to find a free WSS port\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (mpu_port == SNDRV_AUTO_PORT) { | 
|  | mpu_port = snd_legacy_find_free_ioport(possible_mpu_ports, 2); | 
|  | if (mpu_port < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR | 
|  | "unable to find a free MPU401 port\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (irq == SNDRV_AUTO_IRQ) { | 
|  | irq = snd_legacy_find_free_irq(possible_irqs); | 
|  | if (irq < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR "unable to find a free IRQ\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  | if (mpu_irq == SNDRV_AUTO_IRQ) { | 
|  | mpu_irq = snd_legacy_find_free_irq(possible_mpu_irqs); | 
|  | if (mpu_irq < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR | 
|  | "unable to find a free MPU401 IRQ\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  | if (dma1 == SNDRV_AUTO_DMA) { | 
|  | dma1 = snd_legacy_find_free_dma(possible_dma1s); | 
|  | if (dma1 < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR "unable to find a free DMA1\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  | if (dma2 == SNDRV_AUTO_DMA) { | 
|  | dma2 = snd_legacy_find_free_dma(possible_dma2s[dma1 % 4]); | 
|  | if (dma2 < 0) { | 
|  | snd_card_free(card); | 
|  | snd_printk(KERN_ERR "unable to find a free DMA2\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | error = snd_miro_probe(card); | 
|  | if (error < 0) { | 
|  | snd_card_free(card); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | dev_set_drvdata(devptr, card); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_isa_remove(struct device *devptr, | 
|  | unsigned int dev) | 
|  | { | 
|  | snd_card_free(dev_get_drvdata(devptr)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define DEV_NAME "miro" | 
|  |  | 
|  | static struct isa_driver snd_miro_driver = { | 
|  | .match		= snd_miro_isa_match, | 
|  | .probe		= snd_miro_isa_probe, | 
|  | .remove		= snd_miro_isa_remove, | 
|  | /* FIXME: suspend/resume */ | 
|  | .driver		= { | 
|  | .name	= DEV_NAME | 
|  | }, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_PNP | 
|  |  | 
|  | static int snd_card_miro_pnp(struct snd_miro *chip, | 
|  | struct pnp_card_link *card, | 
|  | const struct pnp_card_device_id *pid) | 
|  | { | 
|  | struct pnp_dev *pdev; | 
|  | int err; | 
|  | struct pnp_dev *devmpu; | 
|  | struct pnp_dev *devmc; | 
|  |  | 
|  | pdev = pnp_request_card_device(card, pid->devs[0].id, NULL); | 
|  | if (pdev == NULL) | 
|  | return -EBUSY; | 
|  |  | 
|  | devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL); | 
|  | if (devmpu == NULL) | 
|  | return -EBUSY; | 
|  |  | 
|  | devmc = pnp_request_card_device(card, pid->devs[2].id, NULL); | 
|  | if (devmc == NULL) | 
|  | return -EBUSY; | 
|  |  | 
|  | err = pnp_activate_dev(pdev); | 
|  | if (err < 0) { | 
|  | snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = pnp_activate_dev(devmc); | 
|  | if (err < 0) { | 
|  | snd_printk(KERN_ERR "MC pnp configure failure: %d\n", | 
|  | err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | port = pnp_port_start(pdev, 1); | 
|  | fm_port = pnp_port_start(pdev, 2) + 8; | 
|  |  | 
|  | /* | 
|  | * The MC(0) is never accessed and the miroSOUND PCM20 card does not | 
|  | * include it in the PnP resource range. OPTI93x include it. | 
|  | */ | 
|  | chip->mc_base = pnp_port_start(devmc, 0) - 1; | 
|  | chip->mc_base_size = pnp_port_len(devmc, 0) + 1; | 
|  |  | 
|  | irq = pnp_irq(pdev, 0); | 
|  | dma1 = pnp_dma(pdev, 0); | 
|  | dma2 = pnp_dma(pdev, 1); | 
|  |  | 
|  | if (mpu_port > 0) { | 
|  | err = pnp_activate_dev(devmpu); | 
|  | if (err < 0) { | 
|  | snd_printk(KERN_ERR "MPU401 pnp configure failure\n"); | 
|  | mpu_port = -1; | 
|  | return err; | 
|  | } | 
|  | mpu_port = pnp_port_start(devmpu, 0); | 
|  | mpu_irq = pnp_irq(devmpu, 0); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int snd_miro_pnp_probe(struct pnp_card_link *pcard, | 
|  | const struct pnp_card_device_id *pid) | 
|  | { | 
|  | struct snd_card *card; | 
|  | int err; | 
|  | struct snd_miro *miro; | 
|  |  | 
|  | if (snd_miro_pnp_is_probed) | 
|  | return -EBUSY; | 
|  | if (!isapnp) | 
|  | return -ENODEV; | 
|  | err = snd_card_new(&pcard->card->dev, index, id, THIS_MODULE, | 
|  | sizeof(struct snd_miro), &card); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | card->private_free = snd_card_miro_free; | 
|  | miro = card->private_data; | 
|  |  | 
|  | err = snd_card_miro_pnp(miro, pcard, pid); | 
|  | if (err) { | 
|  | snd_card_free(card); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* only miroSOUND PCM20 and PCM12 == OPTi924 */ | 
|  | err = snd_miro_init(miro, OPTi9XX_HW_82C924); | 
|  | if (err) { | 
|  | snd_card_free(card); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = snd_miro_opti_check(miro); | 
|  | if (err) { | 
|  | snd_printk(KERN_ERR "OPTI chip not found\n"); | 
|  | snd_card_free(card); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = snd_miro_probe(card); | 
|  | if (err < 0) { | 
|  | snd_card_free(card); | 
|  | return err; | 
|  | } | 
|  | pnp_set_card_drvdata(pcard, card); | 
|  | snd_miro_pnp_is_probed = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void snd_miro_pnp_remove(struct pnp_card_link *pcard) | 
|  | { | 
|  | snd_card_free(pnp_get_card_drvdata(pcard)); | 
|  | pnp_set_card_drvdata(pcard, NULL); | 
|  | snd_miro_pnp_is_probed = 0; | 
|  | } | 
|  |  | 
|  | static struct pnp_card_driver miro_pnpc_driver = { | 
|  | .flags		= PNP_DRIVER_RES_DISABLE, | 
|  | .name		= "miro", | 
|  | .id_table	= snd_miro_pnpids, | 
|  | .probe		= snd_miro_pnp_probe, | 
|  | .remove		= snd_miro_pnp_remove, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static int __init alsa_card_miro_init(void) | 
|  | { | 
|  | #ifdef CONFIG_PNP | 
|  | pnp_register_card_driver(&miro_pnpc_driver); | 
|  | if (snd_miro_pnp_is_probed) | 
|  | return 0; | 
|  | pnp_unregister_card_driver(&miro_pnpc_driver); | 
|  | #endif | 
|  | return isa_register_driver(&snd_miro_driver, 1); | 
|  | } | 
|  |  | 
|  | static void __exit alsa_card_miro_exit(void) | 
|  | { | 
|  | if (!snd_miro_pnp_is_probed) { | 
|  | isa_unregister_driver(&snd_miro_driver); | 
|  | return; | 
|  | } | 
|  | #ifdef CONFIG_PNP | 
|  | pnp_unregister_card_driver(&miro_pnpc_driver); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | module_init(alsa_card_miro_init) | 
|  | module_exit(alsa_card_miro_exit) |