[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/Documentation/ABI/testing/sysfs-bus-siox b/src/kernel/linux/v4.19/Documentation/ABI/testing/sysfs-bus-siox
new file mode 100644
index 0000000..fed7c37
--- /dev/null
+++ b/src/kernel/linux/v4.19/Documentation/ABI/testing/sysfs-bus-siox
@@ -0,0 +1,87 @@
+What: /sys/bus/siox/devices/siox-X/active
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ On reading represents the current state of the bus. If it
+ contains a "0" the bus is stopped and connected devices are
+ expected to not do anything because their watchdog triggered.
+ When the file contains a "1" the bus is operated and periodically
+ does a push-pull cycle to write and read data from the
+ connected devices.
+ When writing a "0" or "1" the bus moves to the described state.
+
+What: /sys/bus/siox/devices/siox-X/device_add
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Write-only file. Write
+
+ <type> <inbytes> <outbytes> <statustype>
+
+ to add a new device dynamically. <type> is the name that is used to match
+ to a driver (similar to the platform bus). <inbytes> and <outbytes> define
+ the length of the input and output shift register in bytes respectively.
+ <statustype> defines the 4 bit device type that is check to identify connection
+ problems.
+ The new device is added to the end of the existing chain.
+
+What: /sys/bus/siox/devices/siox-X/device_remove
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Write-only file. A single write removes the last device in the siox chain.
+
+What: /sys/bus/siox/devices/siox-X/poll_interval_ns
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Defines the interval between two poll cycles in nano seconds.
+ Note this is rounded to jiffies on writing. On reading the current value
+ is returned.
+
+What: /sys/bus/siox/devices/siox-X-Y/connected
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e.
+ communication with it is not ensured. "1" signals a working connection.
+
+What: /sys/bus/siox/devices/siox-X-Y/inbytes
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Read-only value reporting the inbytes value provided to siox-X/device_add
+
+What: /sys/bus/siox/devices/siox-X-Y/status_errors
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Counts the number of time intervals when the read status byte doesn't yield the
+ expected value.
+
+What: /sys/bus/siox/devices/siox-X-Y/type
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Read-only value reporting the type value provided to siox-X/device_add.
+
+What: /sys/bus/siox/devices/siox-X-Y/watchdog
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Read-only value reporting if the watchdog of the siox device is
+ active. "0" means the watchdog is not active and the device is expected to
+ be operational. "1" means the watchdog keeps the device in reset.
+
+What: /sys/bus/siox/devices/siox-X-Y/watchdog_errors
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Read-only value reporting the number to time intervals when the
+ watchdog was active.
+
+What: /sys/bus/siox/devices/siox-X-Y/outbytes
+KernelVersion: 4.16
+Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+ Read-only value reporting the outbytes value provided to siox-X/device_add.