[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/Documentation/hwmon/max31785 b/src/kernel/linux/v4.19/Documentation/hwmon/max31785
new file mode 100644
index 0000000..270c5f8
--- /dev/null
+++ b/src/kernel/linux/v4.19/Documentation/hwmon/max31785
@@ -0,0 +1,60 @@
+Kernel driver max31785
+======================
+
+Supported chips:
+ * Maxim MAX31785, MAX31785A
+ Prefix: 'max31785' or 'max31785a'
+ Addresses scanned: -
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
+
+Author: Andrew Jeffery <andrew@aj.id.au>
+
+Description
+-----------
+
+The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan
+management with temperature and remote voltage sensing. Various fan control
+features are provided, including PWM frequency control, temperature hysteresis,
+dual tachometer measurements, and fan health monitoring.
+
+For dual-rotor configurations the MAX31785A exposes the second rotor tachometer
+readings in attributes fan[5-8]_input. By contrast the MAX31785 only exposes
+the slowest rotor measurement, and does so in the fan[1-4]_input attributes.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+fan[1-4]_alarm Fan alarm.
+fan[1-4]_fault Fan fault.
+fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the
+ second rotor of fans 1-4
+fan[1-4]_target Fan input target
+
+in[1-6]_crit Critical maximum output voltage
+in[1-6]_crit_alarm Output voltage critical high alarm
+in[1-6]_input Measured output voltage
+in[1-6]_label "vout[18-23]"
+in[1-6]_lcrit Critical minimum output voltage
+in[1-6]_lcrit_alarm Output voltage critical low alarm
+in[1-6]_max Maximum output voltage
+in[1-6]_max_alarm Output voltage high alarm
+in[1-6]_min Minimum output voltage
+in[1-6]_min_alarm Output voltage low alarm
+
+pwm[1-4] Fan target duty cycle (0..255)
+pwm[1-4]_enable 0: Full-speed
+ 1: Manual PWM control
+ 2: Automatic PWM (tach-feedback RPM fan-control)
+ 3: Automatic closed-loop (temp-feedback fan-control)
+
+temp[1-11]_crit Critical high temperature
+temp[1-11]_crit_alarm Chip temperature critical high alarm
+temp[1-11]_input Measured temperature
+temp[1-11]_max Maximum temperature
+temp[1-11]_max_alarm Chip temperature high alarm