[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/drivers/base/Kconfig b/src/kernel/linux/v4.19/drivers/base/Kconfig
new file mode 100644
index 0000000..959c828
--- /dev/null
+++ b/src/kernel/linux/v4.19/drivers/base/Kconfig
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Generic Driver Options"
+
+config UEVENT_HELPER
+ bool "Support for uevent helper"
+ default y
+ help
+ The uevent helper program is forked by the kernel for
+ every uevent.
+ Before the switch to the netlink-based uevent source, this was
+ used to hook hotplug scripts into kernel device events. It
+ usually pointed to a shell script at /sbin/hotplug.
+ This should not be used today, because usual systems create
+ many events at bootup or device discovery in a very short time
+ frame. One forked process per event can create so many processes
+ that it creates a high system load, or on smaller systems
+ it is known to create out-of-memory situations during bootup.
+
+config UEVENT_HELPER_PATH
+ string "path to uevent helper"
+ depends on UEVENT_HELPER
+ default ""
+ help
+ To disable user space helper program execution at by default
+ specify an empty string here. This setting can still be altered
+ via /proc/sys/kernel/hotplug or via /sys/kernel/uevent_helper
+ later at runtime.
+
+config DEVTMPFS
+ bool "Maintain a devtmpfs filesystem to mount at /dev"
+ help
+ This creates a tmpfs/ramfs filesystem instance early at bootup.
+ In this filesystem, the kernel driver core maintains device
+ nodes with their default names and permissions for all
+ registered devices with an assigned major/minor number.
+ Userspace can modify the filesystem content as needed, add
+ symlinks, and apply needed permissions.
+ It provides a fully functional /dev directory, where usually
+ udev runs on top, managing permissions and adding meaningful
+ symlinks.
+ In very limited environments, it may provide a sufficient
+ functional /dev without any further help. It also allows simple
+ rescue systems, and reliably handles dynamic major/minor numbers.
+
+ Notice: if CONFIG_TMPFS isn't enabled, the simpler ramfs
+ file system will be used instead.
+
+config DEVTMPFS_MOUNT
+ bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
+ depends on DEVTMPFS
+ help
+ This will instruct the kernel to automatically mount the
+ devtmpfs filesystem at /dev, directly after the kernel has
+ mounted the root filesystem. The behavior can be overridden
+ with the commandline parameter: devtmpfs.mount=0|1.
+ This option does not affect initramfs based booting, here
+ the devtmpfs filesystem always needs to be mounted manually
+ after the rootfs is mounted.
+ With this option enabled, it allows to bring up a system in
+ rescue mode with init=/bin/sh, even when the /dev directory
+ on the rootfs is completely empty.
+
+config STANDALONE
+ bool "Select only drivers that don't need compile-time external firmware"
+ default y
+ help
+ Select this option if you don't have magic firmware for drivers that
+ need it.
+
+ If unsure, say Y.
+
+config PREVENT_FIRMWARE_BUILD
+ bool "Disable drivers features which enable custom firmware building"
+ default y
+ help
+ Say yes to disable driver features which enable building a custom
+ driver firmware at kernel build time. These drivers do not use the
+ kernel firmware API to load firmware (CONFIG_FW_LOADER), instead they
+ use their own custom loading mechanism. The required firmware is
+ usually shipped with the driver, building the driver firmware
+ should only be needed if you have an updated firmware source.
+
+ Firmware should not be being built as part of kernel, these days
+ you should always prevent this and say Y here. There are only two
+ old drivers which enable building of its firmware at kernel build
+ time:
+
+ o CONFIG_WANXL through CONFIG_WANXL_BUILD_FIRMWARE
+ o CONFIG_SCSI_AIC79XX through CONFIG_AIC79XX_BUILD_FIRMWARE
+
+source "drivers/base/firmware_loader/Kconfig"
+
+config WANT_DEV_COREDUMP
+ bool
+ help
+ Drivers should "select" this option if they desire to use the
+ device coredump mechanism.
+
+config ALLOW_DEV_COREDUMP
+ bool "Allow device coredump" if EXPERT
+ default y
+ help
+ This option controls if the device coredump mechanism is available or
+ not; if disabled, the mechanism will be omitted even if drivers that
+ can use it are enabled.
+ Say 'N' for more sensitive systems or systems that don't want
+ to ever access the information to not have the code, nor keep any
+ data.
+
+ If unsure, say Y.
+
+config DEV_COREDUMP
+ bool
+ default y if WANT_DEV_COREDUMP
+ depends on ALLOW_DEV_COREDUMP
+
+config DEBUG_DRIVER
+ bool "Driver Core verbose debug messages"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here if you want the Driver core to produce a bunch of
+ debug messages to the system log. Select this if you are having a
+ problem with the driver core and want to see more of what is
+ going on.
+
+ If you are unsure about this, say N here.
+
+config DEBUG_DEVRES
+ bool "Managed device resources verbose debug messages"
+ depends on DEBUG_KERNEL
+ help
+ This option enables kernel parameter devres.log. If set to
+ non-zero, devres debug messages are printed. Select this if
+ you are having a problem with devres or want to debug
+ resource management for a managed device. devres.log can be
+ switched on and off from sysfs node.
+
+ If you are unsure about this, Say N here.
+
+config DEBUG_TEST_DRIVER_REMOVE
+ bool "Test driver remove calls during probe (UNSTABLE)"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here if you want the Driver core to test driver remove functions
+ by calling probe, remove, probe. This tests the remove path without
+ having to unbind the driver or unload the driver module.
+
+ This option is expected to find errors and may render your system
+ unusable. You should say N here unless you are explicitly looking to
+ test this functionality.
+
+source "drivers/base/test/Kconfig"
+
+config SYS_HYPERVISOR
+ bool
+ default n
+
+config GENERIC_CPU_DEVICES
+ bool
+ default n
+
+config GENERIC_CPU_AUTOPROBE
+ bool
+
+config GENERIC_CPU_VULNERABILITIES
+ bool
+
+config SOC_BUS
+ bool
+ select GLOB
+
+source "drivers/base/regmap/Kconfig"
+
+config DMA_SHARED_BUFFER
+ tristate
+ default n
+ select ANON_INODES
+ select IRQ_WORK
+ help
+ This option enables the framework for buffer-sharing between
+ multiple drivers. A buffer is associated with a file using driver
+ APIs extension; the file's descriptor can then be passed on to other
+ driver.
+
+config DMA_FENCE_TRACE
+ bool "Enable verbose DMA_FENCE_TRACE messages"
+ depends on DMA_SHARED_BUFFER
+ help
+ Enable the DMA_FENCE_TRACE printks. This will add extra
+ spam to the console log, but will make it easier to diagnose
+ lockup related problems for dma-buffers shared across multiple
+ devices.
+
+config DMA_CMA
+ bool "DMA Contiguous Memory Allocator"
+ depends on HAVE_DMA_CONTIGUOUS && CMA
+ help
+ This enables the Contiguous Memory Allocator which allows drivers
+ to allocate big physically-contiguous blocks of memory for use with
+ hardware components that do not support I/O map nor scatter-gather.
+
+ You can disable CMA by specifying "cma=0" on the kernel's command
+ line.
+
+ For more information see <include/linux/dma-contiguous.h>.
+ If unsure, say "n".
+
+if DMA_CMA
+comment "Default contiguous memory area size:"
+
+config CMA_SIZE_MBYTES
+ int "Size in Mega Bytes"
+ depends on !CMA_SIZE_SEL_PERCENTAGE
+ default 0 if X86
+ default 16
+ help
+ Defines the size (in MiB) of the default memory area for Contiguous
+ Memory Allocator. If the size of 0 is selected, CMA is disabled by
+ default, but it can be enabled by passing cma=size[MG] to the kernel.
+
+
+config CMA_SIZE_PERCENTAGE
+ int "Percentage of total memory"
+ depends on !CMA_SIZE_SEL_MBYTES
+ default 0 if X86
+ default 10
+ help
+ Defines the size of the default memory area for Contiguous Memory
+ Allocator as a percentage of the total memory in the system.
+ If 0 percent is selected, CMA is disabled by default, but it can be
+ enabled by passing cma=size[MG] to the kernel.
+
+choice
+ prompt "Selected region size"
+ default CMA_SIZE_SEL_MBYTES
+
+config CMA_SIZE_SEL_MBYTES
+ bool "Use mega bytes value only"
+
+config CMA_SIZE_SEL_PERCENTAGE
+ bool "Use percentage value only"
+
+config CMA_SIZE_SEL_MIN
+ bool "Use lower value (minimum)"
+
+config CMA_SIZE_SEL_MAX
+ bool "Use higher value (maximum)"
+
+endchoice
+
+config CMA_ALIGNMENT
+ int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
+ range 4 12
+ default 8
+ help
+ DMA mapping framework by default aligns all buffers to the smallest
+ PAGE_SIZE order which is greater than or equal to the requested buffer
+ size. This works well for buffers up to a few hundreds kilobytes, but
+ for larger buffers it just a memory waste. With this parameter you can
+ specify the maximum PAGE_SIZE order for contiguous buffers. Larger
+ buffers will be aligned only to this specified order. The order is
+ expressed as a power of two multiplied by the PAGE_SIZE.
+
+ For example, if your system defaults to 4KiB pages, the order value
+ of 8 means that the buffers will be aligned up to 1MiB only.
+
+ If unsure, leave the default value "8".
+
+endif
+
+config GENERIC_ARCH_TOPOLOGY
+ bool
+ help
+ Enable support for architectures common topology code: e.g., parsing
+ CPU capacity information from DT, usage of such information for
+ appropriate scaling, sysfs interface for changing capacity values at
+ runtime.
+
+endmenu