[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/drivers/cpufreq/Kconfig.arm b/src/kernel/linux/v4.19/drivers/cpufreq/Kconfig.arm
new file mode 100644
index 0000000..dbb4fd4
--- /dev/null
+++ b/src/kernel/linux/v4.19/drivers/cpufreq/Kconfig.arm
@@ -0,0 +1,332 @@
+#
+# ARM CPU Frequency scaling drivers
+#
+
+config ACPI_CPPC_CPUFREQ
+ tristate "CPUFreq driver based on the ACPI CPPC spec"
+ depends on ACPI_PROCESSOR
+ select ACPI_CPPC_LIB
+ help
+ This adds a CPUFreq driver which uses CPPC methods
+ as described in the ACPIv5.1 spec. CPPC stands for
+ Collaborative Processor Performance Controls. It
+ is based on an abstract continuous scale of CPU
+ performance values which allows the remote power
+ processor to flexibly optimize for power and
+ performance. CPPC relies on power management firmware
+ support for its operation.
+
+ If in doubt, say N.
+
+config ARM_ARMADA_37XX_CPUFREQ
+ tristate "Armada 37xx CPUFreq support"
+ depends on ARCH_MVEBU && CPUFREQ_DT
+ help
+ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
+ The Armada 37xx PMU supports 4 frequency and VDD levels.
+
+# big LITTLE core layer and glue drivers
+config ARM_BIG_LITTLE_CPUFREQ
+ tristate "Generic ARM big LITTLE CPUfreq driver"
+ depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
+ # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
+ depends on !CPU_THERMAL || THERMAL
+ select PM_OPP
+ help
+ This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
+
+config ARM_DT_BL_CPUFREQ
+ tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && OF
+ help
+ This enables probing via DT for Generic CPUfreq driver for ARM
+ big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_SCPI_CPUFREQ
+ tristate "SCPI based CPUfreq driver"
+ depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
+ depends on !CPU_THERMAL || THERMAL
+ help
+ This adds the CPUfreq driver support for ARM platforms using SCPI
+ protocol for CPU power management.
+
+ This driver uses SCPI Message Protocol driver to interact with the
+ firmware providing the CPU DVFS functionality.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+ tristate "Versatile Express SPC based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+ help
+ This add the CPUfreq driver support for Versatile Express
+ big.LITTLE platforms using SPC for power management.
+
+config ARM_BRCMSTB_AVS_CPUFREQ
+ tristate "Broadcom STB AVS CPUfreq driver"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ default y
+ help
+ Some Broadcom STB SoCs use a co-processor running proprietary firmware
+ ("AVS") to handle voltage and frequency scaling. This driver provides
+ a standard CPUfreq interface to to the firmware.
+
+ Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
+
+config ARM_HIGHBANK_CPUFREQ
+ tristate "Calxeda Highbank-based"
+ depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
+ default m
+ help
+ This adds the CPUFreq driver for Calxeda Highbank SoC
+ based boards.
+
+ If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+ tristate "Freescale i.MX6 cpufreq support"
+ depends on ARCH_MXC
+ depends on REGULATOR_ANATOP
+ select PM_OPP
+ help
+ This adds cpufreq driver support for Freescale i.MX6 series SoCs.
+
+ If in doubt, say N.
+
+config ARM_KIRKWOOD_CPUFREQ
+ def_bool MACH_KIRKWOOD
+ help
+ This adds the CPUFreq driver for Marvell Kirkwood
+ SoCs.
+
+config ARM_MEDIATEK_CPUFREQ
+ tristate "CPU Frequency scaling support for MediaTek SoCs"
+ depends on ARCH_MEDIATEK && REGULATOR
+ depends on !CPU_THERMAL || THERMAL
+ select PM_OPP
+ help
+ This adds the CPUFreq driver support for MediaTek SoCs.
+
+config ARM_MEDIATEK_MCUPM_CPUFREQ
+ tristate "Mediatek MCUPM CPUFreq support"
+ depends on ARCH_MEDIATEK
+ depends on MTK_TINYSYS_MCUPM_SUPPORT
+ select PM_OPP
+ help
+ This adds the CPUFreq driver support for Mediatek MCUPM-based SoCs.
+ Some chipsets interact with a microprocessor for the firmware to
+ scale frequency.
+
+ If in doubt, say N.
+
+config ARM_MEDIATEK_MT6880_CPUFREQ
+ tristate "Mediatek MT6880 CPUFreq support"
+ depends on ARCH_MEDIATEK && REGULATOR
+ select PM_OPP
+ help
+ This adds the CPUFreq driver support for Mediatek MT6880 Series SoC.
+ This driver require dt-based operating-points-v2 tables with
+ voltage and frequency.
+ If in doubt, say N.
+
+config ARM_SSPM_CPUFREQ
+ tristate "Mediatek SSPM CPUFreq support"
+ depends on ARCH_MEDIATEK
+ select PM_OPP
+ help
+ This adds the CPUFreq driver support for Mediatek MT67xx Series SoC.
+ This driver require dt-based operating-points-v2 tables with
+ voltage and frequency.
+ If in doubt, say N.
+
+config ARM_OMAP2PLUS_CPUFREQ
+ bool "TI OMAP2+"
+ depends on ARCH_OMAP2PLUS
+ default ARCH_OMAP2PLUS
+
+config ARM_QCOM_CPUFREQ_KRYO
+ tristate "Qualcomm Kryo based CPUFreq"
+ depends on ARM64
+ depends on QCOM_QFPROM
+ depends on QCOM_SMEM
+ select PM_OPP
+ help
+ This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
+
+ If in doubt, say N.
+
+config ARM_S3C_CPUFREQ
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config ARM_S3C24XX_CPUFREQ
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
+ depends on ARCH_S3C24XX
+ select ARM_S3C_CPUFREQ
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config ARM_S3C24XX_CPUFREQ_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on ARM_S3C24XX_CPUFREQ
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
+ help
+ Export status information via debugfs.
+
+config ARM_S3C2410_CPUFREQ
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config ARM_S3C2412_CPUFREQ
+ bool
+ depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
+ default y
+ select S3C2412_IOTIMING
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
+config ARM_S3C2416_CPUFREQ
+ bool "S3C2416 CPU Frequency scaling support"
+ depends on CPU_S3C2416
+ help
+ This adds the CPUFreq driver for the Samsung S3C2416 and
+ S3C2450 SoC. The S3C2416 supports changing the rate of the
+ armdiv clock source and also entering a so called dynamic
+ voltage scaling mode in which it is possible to reduce the
+ core voltage of the CPU.
+
+ If in doubt, say N.
+
+config ARM_S3C2416_CPUFREQ_VCORESCALE
+ bool "Allow voltage scaling for S3C2416 arm core"
+ depends on ARM_S3C2416_CPUFREQ && REGULATOR
+ help
+ Enable CPU voltage scaling when entering the dvs mode.
+ It uses information gathered through existing hardware and
+ tests but not documented in any datasheet.
+
+ If in doubt, say N.
+
+config ARM_S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config ARM_S3C64XX_CPUFREQ
+ bool "Samsung S3C64XX"
+ depends on CPU_S3C6410
+ default y
+ help
+ This adds the CPUFreq driver for Samsung S3C6410 SoC.
+
+ If in doubt, say N.
+
+config ARM_S5PV210_CPUFREQ
+ bool "Samsung S5PV210 and S5PC110"
+ depends on CPU_S5PV210
+ default y
+ help
+ This adds the CPUFreq driver for Samsung S5PV210 and
+ S5PC110 SoCs.
+
+ If in doubt, say N.
+
+config ARM_SA1100_CPUFREQ
+ bool
+
+config ARM_SA1110_CPUFREQ
+ bool
+
+config ARM_SCMI_CPUFREQ
+ tristate "SCMI based CPUfreq driver"
+ depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
+ depends on !CPU_THERMAL || THERMAL
+ select PM_OPP
+ help
+ This adds the CPUfreq driver support for ARM platforms using SCMI
+ protocol for CPU power management.
+
+ This driver uses SCMI Message Protocol driver to interact with the
+ firmware providing the CPU DVFS functionality.
+
+config ARM_SPEAR_CPUFREQ
+ bool "SPEAr CPUFreq support"
+ depends on PLAT_SPEAR
+ default y
+ help
+ This adds the CPUFreq driver support for SPEAr SOCs.
+
+config ARM_STI_CPUFREQ
+ tristate "STi CPUFreq support"
+ depends on SOC_STIH407
+ help
+ This driver uses the generic OPP framework to match the running
+ platform with a predefined set of suitable values. If not provided
+ we will fall-back so safe-values contained in Device Tree. Enable
+ this config option if you wish to add CPUFreq support for STi based
+ SoCs.
+
+config ARM_TANGO_CPUFREQ
+ bool
+ depends on CPUFREQ_DT && ARCH_TANGO
+ default y
+
+config ARM_TEGRA20_CPUFREQ
+ tristate "Tegra20 CPUFreq support"
+ depends on ARCH_TEGRA
+ default y
+ help
+ This adds the CPUFreq driver support for Tegra20 SOCs.
+
+config ARM_TEGRA124_CPUFREQ
+ tristate "Tegra124 CPUFreq support"
+ depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
+ default y
+ help
+ This adds the CPUFreq driver support for Tegra124 SOCs.
+
+config ARM_TEGRA186_CPUFREQ
+ tristate "Tegra186 CPUFreq support"
+ depends on ARCH_TEGRA && TEGRA_BPMP
+ help
+ This adds the CPUFreq driver support for Tegra186 SOCs.
+
+config ARM_TI_CPUFREQ
+ bool "Texas Instruments CPUFreq support"
+ depends on ARCH_OMAP2PLUS
+ help
+ This driver enables valid OPPs on the running platform based on
+ values contained within the SoC in use. Enable this in order to
+ use the cpufreq-dt driver on all Texas Instruments platforms that
+ provide dt based operating-points-v2 tables with opp-supported-hw
+ data provided. Required for cpufreq support on AM335x, AM437x,
+ DRA7x, and AM57x platforms.
+
+config ARM_PXA2xx_CPUFREQ
+ tristate "Intel PXA2xx CPUfreq driver"
+ depends on PXA27x || PXA25x
+ help
+ This add the CPUFreq driver support for Intel PXA2xx SOCs.
+
+ If in doubt, say N.