[Feature] add GA346 baseline version

Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/drivers/gpu/ipu-v3/ipu-image-convert.c b/src/kernel/linux/v4.19/drivers/gpu/ipu-v3/ipu-image-convert.c
new file mode 100644
index 0000000..91653ad
--- /dev/null
+++ b/src/kernel/linux/v4.19/drivers/gpu/ipu-v3/ipu-image-convert.c
@@ -0,0 +1,1724 @@
+/*
+ * Copyright (C) 2012-2016 Mentor Graphics Inc.
+ *
+ * Queued image conversion support, with tiling and rotation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <video/imx-ipu-image-convert.h>
+#include "ipu-prv.h"
+
+/*
+ * The IC Resizer has a restriction that the output frame from the
+ * resizer must be 1024 or less in both width (pixels) and height
+ * (lines).
+ *
+ * The image converter attempts to split up a conversion when
+ * the desired output (converted) frame resolution exceeds the
+ * IC resizer limit of 1024 in either dimension.
+ *
+ * If either dimension of the output frame exceeds the limit, the
+ * dimension is split into 1, 2, or 4 equal stripes, for a maximum
+ * of 4*4 or 16 tiles. A conversion is then carried out for each
+ * tile (but taking care to pass the full frame stride length to
+ * the DMA channel's parameter memory!). IDMA double-buffering is used
+ * to convert each tile back-to-back when possible (see note below
+ * when double_buffering boolean is set).
+ *
+ * Note that the input frame must be split up into the same number
+ * of tiles as the output frame.
+ *
+ * FIXME: at this point there is no attempt to deal with visible seams
+ * at the tile boundaries when upscaling. The seams are caused by a reset
+ * of the bilinear upscale interpolation when starting a new tile. The
+ * seams are barely visible for small upscale factors, but become
+ * increasingly visible as the upscale factor gets larger, since more
+ * interpolated pixels get thrown out at the tile boundaries. A possilble
+ * fix might be to overlap tiles of different sizes, but this must be done
+ * while also maintaining the IDMAC dma buffer address alignment and 8x8 IRT
+ * alignment restrictions of each tile.
+ */
+
+#define MAX_STRIPES_W    4
+#define MAX_STRIPES_H    4
+#define MAX_TILES (MAX_STRIPES_W * MAX_STRIPES_H)
+
+#define MIN_W     16
+#define MIN_H     8
+#define MAX_W     4096
+#define MAX_H     4096
+
+enum ipu_image_convert_type {
+	IMAGE_CONVERT_IN = 0,
+	IMAGE_CONVERT_OUT,
+};
+
+struct ipu_image_convert_dma_buf {
+	void          *virt;
+	dma_addr_t    phys;
+	unsigned long len;
+};
+
+struct ipu_image_convert_dma_chan {
+	int in;
+	int out;
+	int rot_in;
+	int rot_out;
+	int vdi_in_p;
+	int vdi_in;
+	int vdi_in_n;
+};
+
+/* dimensions of one tile */
+struct ipu_image_tile {
+	u32 width;
+	u32 height;
+	/* size and strides are in bytes */
+	u32 size;
+	u32 stride;
+	u32 rot_stride;
+	/* start Y or packed offset of this tile */
+	u32 offset;
+	/* offset from start to tile in U plane, for planar formats */
+	u32 u_off;
+	/* offset from start to tile in V plane, for planar formats */
+	u32 v_off;
+};
+
+struct ipu_image_convert_image {
+	struct ipu_image base;
+	enum ipu_image_convert_type type;
+
+	const struct ipu_image_pixfmt *fmt;
+	unsigned int stride;
+
+	/* # of rows (horizontal stripes) if dest height is > 1024 */
+	unsigned int num_rows;
+	/* # of columns (vertical stripes) if dest width is > 1024 */
+	unsigned int num_cols;
+
+	struct ipu_image_tile tile[MAX_TILES];
+};
+
+struct ipu_image_pixfmt {
+	u32	fourcc;        /* V4L2 fourcc */
+	int     bpp;           /* total bpp */
+	int     uv_width_dec;  /* decimation in width for U/V planes */
+	int     uv_height_dec; /* decimation in height for U/V planes */
+	bool    planar;        /* planar format */
+	bool    uv_swapped;    /* U and V planes are swapped */
+	bool    uv_packed;     /* partial planar (U and V in same plane) */
+};
+
+struct ipu_image_convert_ctx;
+struct ipu_image_convert_chan;
+struct ipu_image_convert_priv;
+
+struct ipu_image_convert_ctx {
+	struct ipu_image_convert_chan *chan;
+
+	ipu_image_convert_cb_t complete;
+	void *complete_context;
+
+	/* Source/destination image data and rotation mode */
+	struct ipu_image_convert_image in;
+	struct ipu_image_convert_image out;
+	enum ipu_rotate_mode rot_mode;
+
+	/* intermediate buffer for rotation */
+	struct ipu_image_convert_dma_buf rot_intermediate[2];
+
+	/* current buffer number for double buffering */
+	int cur_buf_num;
+
+	bool aborting;
+	struct completion aborted;
+
+	/* can we use double-buffering for this conversion operation? */
+	bool double_buffering;
+	/* num_rows * num_cols */
+	unsigned int num_tiles;
+	/* next tile to process */
+	unsigned int next_tile;
+	/* where to place converted tile in dest image */
+	unsigned int out_tile_map[MAX_TILES];
+
+	struct list_head list;
+};
+
+struct ipu_image_convert_chan {
+	struct ipu_image_convert_priv *priv;
+
+	enum ipu_ic_task ic_task;
+	const struct ipu_image_convert_dma_chan *dma_ch;
+
+	struct ipu_ic *ic;
+	struct ipuv3_channel *in_chan;
+	struct ipuv3_channel *out_chan;
+	struct ipuv3_channel *rotation_in_chan;
+	struct ipuv3_channel *rotation_out_chan;
+
+	/* the IPU end-of-frame irqs */
+	int out_eof_irq;
+	int rot_out_eof_irq;
+
+	spinlock_t irqlock;
+
+	/* list of convert contexts */
+	struct list_head ctx_list;
+	/* queue of conversion runs */
+	struct list_head pending_q;
+	/* queue of completed runs */
+	struct list_head done_q;
+
+	/* the current conversion run */
+	struct ipu_image_convert_run *current_run;
+};
+
+struct ipu_image_convert_priv {
+	struct ipu_image_convert_chan chan[IC_NUM_TASKS];
+	struct ipu_soc *ipu;
+};
+
+static const struct ipu_image_convert_dma_chan
+image_convert_dma_chan[IC_NUM_TASKS] = {
+	[IC_TASK_VIEWFINDER] = {
+		.in = IPUV3_CHANNEL_MEM_IC_PRP_VF,
+		.out = IPUV3_CHANNEL_IC_PRP_VF_MEM,
+		.rot_in = IPUV3_CHANNEL_MEM_ROT_VF,
+		.rot_out = IPUV3_CHANNEL_ROT_VF_MEM,
+		.vdi_in_p = IPUV3_CHANNEL_MEM_VDI_PREV,
+		.vdi_in = IPUV3_CHANNEL_MEM_VDI_CUR,
+		.vdi_in_n = IPUV3_CHANNEL_MEM_VDI_NEXT,
+	},
+	[IC_TASK_POST_PROCESSOR] = {
+		.in = IPUV3_CHANNEL_MEM_IC_PP,
+		.out = IPUV3_CHANNEL_IC_PP_MEM,
+		.rot_in = IPUV3_CHANNEL_MEM_ROT_PP,
+		.rot_out = IPUV3_CHANNEL_ROT_PP_MEM,
+	},
+};
+
+static const struct ipu_image_pixfmt image_convert_formats[] = {
+	{
+		.fourcc	= V4L2_PIX_FMT_RGB565,
+		.bpp    = 16,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_RGB24,
+		.bpp    = 24,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_BGR24,
+		.bpp    = 24,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_RGB32,
+		.bpp    = 32,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_BGR32,
+		.bpp    = 32,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_XRGB32,
+		.bpp    = 32,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_XBGR32,
+		.bpp    = 32,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_YUYV,
+		.bpp    = 16,
+		.uv_width_dec = 2,
+		.uv_height_dec = 1,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_UYVY,
+		.bpp    = 16,
+		.uv_width_dec = 2,
+		.uv_height_dec = 1,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_YUV420,
+		.bpp    = 12,
+		.planar = true,
+		.uv_width_dec = 2,
+		.uv_height_dec = 2,
+	}, {
+		.fourcc	= V4L2_PIX_FMT_YVU420,
+		.bpp    = 12,
+		.planar = true,
+		.uv_width_dec = 2,
+		.uv_height_dec = 2,
+		.uv_swapped = true,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV12,
+		.bpp    = 12,
+		.planar = true,
+		.uv_width_dec = 2,
+		.uv_height_dec = 2,
+		.uv_packed = true,
+	}, {
+		.fourcc = V4L2_PIX_FMT_YUV422P,
+		.bpp    = 16,
+		.planar = true,
+		.uv_width_dec = 2,
+		.uv_height_dec = 1,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV16,
+		.bpp    = 16,
+		.planar = true,
+		.uv_width_dec = 2,
+		.uv_height_dec = 1,
+		.uv_packed = true,
+	},
+};
+
+static const struct ipu_image_pixfmt *get_format(u32 fourcc)
+{
+	const struct ipu_image_pixfmt *ret = NULL;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(image_convert_formats); i++) {
+		if (image_convert_formats[i].fourcc == fourcc) {
+			ret = &image_convert_formats[i];
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static void dump_format(struct ipu_image_convert_ctx *ctx,
+			struct ipu_image_convert_image *ic_image)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+
+	dev_dbg(priv->ipu->dev,
+		"task %u: ctx %p: %s format: %dx%d (%dx%d tiles of size %dx%d), %c%c%c%c\n",
+		chan->ic_task, ctx,
+		ic_image->type == IMAGE_CONVERT_OUT ? "Output" : "Input",
+		ic_image->base.pix.width, ic_image->base.pix.height,
+		ic_image->num_cols, ic_image->num_rows,
+		ic_image->tile[0].width, ic_image->tile[0].height,
+		ic_image->fmt->fourcc & 0xff,
+		(ic_image->fmt->fourcc >> 8) & 0xff,
+		(ic_image->fmt->fourcc >> 16) & 0xff,
+		(ic_image->fmt->fourcc >> 24) & 0xff);
+}
+
+int ipu_image_convert_enum_format(int index, u32 *fourcc)
+{
+	const struct ipu_image_pixfmt *fmt;
+
+	if (index >= (int)ARRAY_SIZE(image_convert_formats))
+		return -EINVAL;
+
+	/* Format found */
+	fmt = &image_convert_formats[index];
+	*fourcc = fmt->fourcc;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_enum_format);
+
+static void free_dma_buf(struct ipu_image_convert_priv *priv,
+			 struct ipu_image_convert_dma_buf *buf)
+{
+	if (buf->virt)
+		dma_free_coherent(priv->ipu->dev,
+				  buf->len, buf->virt, buf->phys);
+	buf->virt = NULL;
+	buf->phys = 0;
+}
+
+static int alloc_dma_buf(struct ipu_image_convert_priv *priv,
+			 struct ipu_image_convert_dma_buf *buf,
+			 int size)
+{
+	buf->len = PAGE_ALIGN(size);
+	buf->virt = dma_alloc_coherent(priv->ipu->dev, buf->len, &buf->phys,
+				       GFP_DMA | GFP_KERNEL);
+	if (!buf->virt) {
+		dev_err(priv->ipu->dev, "failed to alloc dma buffer\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static inline int num_stripes(int dim)
+{
+	if (dim <= 1024)
+		return 1;
+	else if (dim <= 2048)
+		return 2;
+	else
+		return 4;
+}
+
+static void calc_tile_dimensions(struct ipu_image_convert_ctx *ctx,
+				 struct ipu_image_convert_image *image)
+{
+	int i;
+
+	for (i = 0; i < ctx->num_tiles; i++) {
+		struct ipu_image_tile *tile = &image->tile[i];
+
+		tile->height = image->base.pix.height / image->num_rows;
+		tile->width = image->base.pix.width / image->num_cols;
+		tile->size = ((tile->height * image->fmt->bpp) >> 3) *
+			tile->width;
+
+		if (image->fmt->planar) {
+			tile->stride = tile->width;
+			tile->rot_stride = tile->height;
+		} else {
+			tile->stride =
+				(image->fmt->bpp * tile->width) >> 3;
+			tile->rot_stride =
+				(image->fmt->bpp * tile->height) >> 3;
+		}
+	}
+}
+
+/*
+ * Use the rotation transformation to find the tile coordinates
+ * (row, col) of a tile in the destination frame that corresponds
+ * to the given tile coordinates of a source frame. The destination
+ * coordinate is then converted to a tile index.
+ */
+static int transform_tile_index(struct ipu_image_convert_ctx *ctx,
+				int src_row, int src_col)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_image *s_image = &ctx->in;
+	struct ipu_image_convert_image *d_image = &ctx->out;
+	int dst_row, dst_col;
+
+	/* with no rotation it's a 1:1 mapping */
+	if (ctx->rot_mode == IPU_ROTATE_NONE)
+		return src_row * s_image->num_cols + src_col;
+
+	/*
+	 * before doing the transform, first we have to translate
+	 * source row,col for an origin in the center of s_image
+	 */
+	src_row = src_row * 2 - (s_image->num_rows - 1);
+	src_col = src_col * 2 - (s_image->num_cols - 1);
+
+	/* do the rotation transform */
+	if (ctx->rot_mode & IPU_ROT_BIT_90) {
+		dst_col = -src_row;
+		dst_row = src_col;
+	} else {
+		dst_col = src_col;
+		dst_row = src_row;
+	}
+
+	/* apply flip */
+	if (ctx->rot_mode & IPU_ROT_BIT_HFLIP)
+		dst_col = -dst_col;
+	if (ctx->rot_mode & IPU_ROT_BIT_VFLIP)
+		dst_row = -dst_row;
+
+	dev_dbg(priv->ipu->dev, "task %u: ctx %p: [%d,%d] --> [%d,%d]\n",
+		chan->ic_task, ctx, src_col, src_row, dst_col, dst_row);
+
+	/*
+	 * finally translate dest row,col using an origin in upper
+	 * left of d_image
+	 */
+	dst_row += d_image->num_rows - 1;
+	dst_col += d_image->num_cols - 1;
+	dst_row /= 2;
+	dst_col /= 2;
+
+	return dst_row * d_image->num_cols + dst_col;
+}
+
+/*
+ * Fill the out_tile_map[] with transformed destination tile indeces.
+ */
+static void calc_out_tile_map(struct ipu_image_convert_ctx *ctx)
+{
+	struct ipu_image_convert_image *s_image = &ctx->in;
+	unsigned int row, col, tile = 0;
+
+	for (row = 0; row < s_image->num_rows; row++) {
+		for (col = 0; col < s_image->num_cols; col++) {
+			ctx->out_tile_map[tile] =
+				transform_tile_index(ctx, row, col);
+			tile++;
+		}
+	}
+}
+
+static void calc_tile_offsets_planar(struct ipu_image_convert_ctx *ctx,
+				     struct ipu_image_convert_image *image)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	const struct ipu_image_pixfmt *fmt = image->fmt;
+	unsigned int row, col, tile = 0;
+	u32 H, w, h, y_stride, uv_stride;
+	u32 uv_row_off, uv_col_off, uv_off, u_off, v_off, tmp;
+	u32 y_row_off, y_col_off, y_off;
+	u32 y_size, uv_size;
+
+	/* setup some convenience vars */
+	H = image->base.pix.height;
+
+	y_stride = image->stride;
+	uv_stride = y_stride / fmt->uv_width_dec;
+	if (fmt->uv_packed)
+		uv_stride *= 2;
+
+	y_size = H * y_stride;
+	uv_size = y_size / (fmt->uv_width_dec * fmt->uv_height_dec);
+
+	for (row = 0; row < image->num_rows; row++) {
+		w = image->tile[tile].width;
+		h = image->tile[tile].height;
+		y_row_off = row * h * y_stride;
+		uv_row_off = (row * h * uv_stride) / fmt->uv_height_dec;
+
+		for (col = 0; col < image->num_cols; col++) {
+			y_col_off = col * w;
+			uv_col_off = y_col_off / fmt->uv_width_dec;
+			if (fmt->uv_packed)
+				uv_col_off *= 2;
+
+			y_off = y_row_off + y_col_off;
+			uv_off = uv_row_off + uv_col_off;
+
+			u_off = y_size - y_off + uv_off;
+			v_off = (fmt->uv_packed) ? 0 : u_off + uv_size;
+			if (fmt->uv_swapped) {
+				tmp = u_off;
+				u_off = v_off;
+				v_off = tmp;
+			}
+
+			image->tile[tile].offset = y_off;
+			image->tile[tile].u_off = u_off;
+			image->tile[tile++].v_off = v_off;
+
+			dev_dbg(priv->ipu->dev,
+				"task %u: ctx %p: %s@[%d,%d]: y_off %08x, u_off %08x, v_off %08x\n",
+				chan->ic_task, ctx,
+				image->type == IMAGE_CONVERT_IN ?
+				"Input" : "Output", row, col,
+				y_off, u_off, v_off);
+		}
+	}
+}
+
+static void calc_tile_offsets_packed(struct ipu_image_convert_ctx *ctx,
+				     struct ipu_image_convert_image *image)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	const struct ipu_image_pixfmt *fmt = image->fmt;
+	unsigned int row, col, tile = 0;
+	u32 w, h, bpp, stride;
+	u32 row_off, col_off;
+
+	/* setup some convenience vars */
+	stride = image->stride;
+	bpp = fmt->bpp;
+
+	for (row = 0; row < image->num_rows; row++) {
+		w = image->tile[tile].width;
+		h = image->tile[tile].height;
+		row_off = row * h * stride;
+
+		for (col = 0; col < image->num_cols; col++) {
+			col_off = (col * w * bpp) >> 3;
+
+			image->tile[tile].offset = row_off + col_off;
+			image->tile[tile].u_off = 0;
+			image->tile[tile++].v_off = 0;
+
+			dev_dbg(priv->ipu->dev,
+				"task %u: ctx %p: %s@[%d,%d]: phys %08x\n",
+				chan->ic_task, ctx,
+				image->type == IMAGE_CONVERT_IN ?
+				"Input" : "Output", row, col,
+				row_off + col_off);
+		}
+	}
+}
+
+static void calc_tile_offsets(struct ipu_image_convert_ctx *ctx,
+			      struct ipu_image_convert_image *image)
+{
+	if (image->fmt->planar)
+		calc_tile_offsets_planar(ctx, image);
+	else
+		calc_tile_offsets_packed(ctx, image);
+}
+
+/*
+ * return the number of runs in given queue (pending_q or done_q)
+ * for this context. hold irqlock when calling.
+ */
+static int get_run_count(struct ipu_image_convert_ctx *ctx,
+			 struct list_head *q)
+{
+	struct ipu_image_convert_run *run;
+	int count = 0;
+
+	lockdep_assert_held(&ctx->chan->irqlock);
+
+	list_for_each_entry(run, q, list) {
+		if (run->ctx == ctx)
+			count++;
+	}
+
+	return count;
+}
+
+static void convert_stop(struct ipu_image_convert_run *run)
+{
+	struct ipu_image_convert_ctx *ctx = run->ctx;
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: stopping ctx %p run %p\n",
+		__func__, chan->ic_task, ctx, run);
+
+	/* disable IC tasks and the channels */
+	ipu_ic_task_disable(chan->ic);
+	ipu_idmac_disable_channel(chan->in_chan);
+	ipu_idmac_disable_channel(chan->out_chan);
+
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		ipu_idmac_disable_channel(chan->rotation_in_chan);
+		ipu_idmac_disable_channel(chan->rotation_out_chan);
+		ipu_idmac_unlink(chan->out_chan, chan->rotation_in_chan);
+	}
+
+	ipu_ic_disable(chan->ic);
+}
+
+static void init_idmac_channel(struct ipu_image_convert_ctx *ctx,
+			       struct ipuv3_channel *channel,
+			       struct ipu_image_convert_image *image,
+			       enum ipu_rotate_mode rot_mode,
+			       bool rot_swap_width_height)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	unsigned int burst_size;
+	u32 width, height, stride;
+	dma_addr_t addr0, addr1 = 0;
+	struct ipu_image tile_image;
+	unsigned int tile_idx[2];
+
+	if (image->type == IMAGE_CONVERT_OUT) {
+		tile_idx[0] = ctx->out_tile_map[0];
+		tile_idx[1] = ctx->out_tile_map[1];
+	} else {
+		tile_idx[0] = 0;
+		tile_idx[1] = 1;
+	}
+
+	if (rot_swap_width_height) {
+		width = image->tile[0].height;
+		height = image->tile[0].width;
+		stride = image->tile[0].rot_stride;
+		addr0 = ctx->rot_intermediate[0].phys;
+		if (ctx->double_buffering)
+			addr1 = ctx->rot_intermediate[1].phys;
+	} else {
+		width = image->tile[0].width;
+		height = image->tile[0].height;
+		stride = image->stride;
+		addr0 = image->base.phys0 +
+			image->tile[tile_idx[0]].offset;
+		if (ctx->double_buffering)
+			addr1 = image->base.phys0 +
+				image->tile[tile_idx[1]].offset;
+	}
+
+	ipu_cpmem_zero(channel);
+
+	memset(&tile_image, 0, sizeof(tile_image));
+	tile_image.pix.width = tile_image.rect.width = width;
+	tile_image.pix.height = tile_image.rect.height = height;
+	tile_image.pix.bytesperline = stride;
+	tile_image.pix.pixelformat =  image->fmt->fourcc;
+	tile_image.phys0 = addr0;
+	tile_image.phys1 = addr1;
+	ipu_cpmem_set_image(channel, &tile_image);
+
+	if (image->fmt->planar && !rot_swap_width_height)
+		ipu_cpmem_set_uv_offset(channel,
+					image->tile[tile_idx[0]].u_off,
+					image->tile[tile_idx[0]].v_off);
+
+	if (rot_mode)
+		ipu_cpmem_set_rotation(channel, rot_mode);
+
+	if (channel == chan->rotation_in_chan ||
+	    channel == chan->rotation_out_chan) {
+		burst_size = 8;
+		ipu_cpmem_set_block_mode(channel);
+	} else
+		burst_size = (width % 16) ? 8 : 16;
+
+	ipu_cpmem_set_burstsize(channel, burst_size);
+
+	ipu_ic_task_idma_init(chan->ic, channel, width, height,
+			      burst_size, rot_mode);
+
+	/*
+	 * Setting a non-zero AXI ID collides with the PRG AXI snooping, so
+	 * only do this when there is no PRG present.
+	 */
+	if (!channel->ipu->prg_priv)
+		ipu_cpmem_set_axi_id(channel, 1);
+
+	ipu_idmac_set_double_buffer(channel, ctx->double_buffering);
+}
+
+static int convert_start(struct ipu_image_convert_run *run)
+{
+	struct ipu_image_convert_ctx *ctx = run->ctx;
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_image *s_image = &ctx->in;
+	struct ipu_image_convert_image *d_image = &ctx->out;
+	enum ipu_color_space src_cs, dest_cs;
+	unsigned int dest_width, dest_height;
+	int ret;
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: starting ctx %p run %p\n",
+		__func__, chan->ic_task, ctx, run);
+
+	src_cs = ipu_pixelformat_to_colorspace(s_image->fmt->fourcc);
+	dest_cs = ipu_pixelformat_to_colorspace(d_image->fmt->fourcc);
+
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		/* swap width/height for resizer */
+		dest_width = d_image->tile[0].height;
+		dest_height = d_image->tile[0].width;
+	} else {
+		dest_width = d_image->tile[0].width;
+		dest_height = d_image->tile[0].height;
+	}
+
+	/* setup the IC resizer and CSC */
+	ret = ipu_ic_task_init(chan->ic,
+			       s_image->tile[0].width,
+			       s_image->tile[0].height,
+			       dest_width,
+			       dest_height,
+			       src_cs, dest_cs);
+	if (ret) {
+		dev_err(priv->ipu->dev, "ipu_ic_task_init failed, %d\n", ret);
+		return ret;
+	}
+
+	/* init the source MEM-->IC PP IDMAC channel */
+	init_idmac_channel(ctx, chan->in_chan, s_image,
+			   IPU_ROTATE_NONE, false);
+
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		/* init the IC PP-->MEM IDMAC channel */
+		init_idmac_channel(ctx, chan->out_chan, d_image,
+				   IPU_ROTATE_NONE, true);
+
+		/* init the MEM-->IC PP ROT IDMAC channel */
+		init_idmac_channel(ctx, chan->rotation_in_chan, d_image,
+				   ctx->rot_mode, true);
+
+		/* init the destination IC PP ROT-->MEM IDMAC channel */
+		init_idmac_channel(ctx, chan->rotation_out_chan, d_image,
+				   IPU_ROTATE_NONE, false);
+
+		/* now link IC PP-->MEM to MEM-->IC PP ROT */
+		ipu_idmac_link(chan->out_chan, chan->rotation_in_chan);
+	} else {
+		/* init the destination IC PP-->MEM IDMAC channel */
+		init_idmac_channel(ctx, chan->out_chan, d_image,
+				   ctx->rot_mode, false);
+	}
+
+	/* enable the IC */
+	ipu_ic_enable(chan->ic);
+
+	/* set buffers ready */
+	ipu_idmac_select_buffer(chan->in_chan, 0);
+	ipu_idmac_select_buffer(chan->out_chan, 0);
+	if (ipu_rot_mode_is_irt(ctx->rot_mode))
+		ipu_idmac_select_buffer(chan->rotation_out_chan, 0);
+	if (ctx->double_buffering) {
+		ipu_idmac_select_buffer(chan->in_chan, 1);
+		ipu_idmac_select_buffer(chan->out_chan, 1);
+		if (ipu_rot_mode_is_irt(ctx->rot_mode))
+			ipu_idmac_select_buffer(chan->rotation_out_chan, 1);
+	}
+
+	/* enable the channels! */
+	ipu_idmac_enable_channel(chan->in_chan);
+	ipu_idmac_enable_channel(chan->out_chan);
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		ipu_idmac_enable_channel(chan->rotation_in_chan);
+		ipu_idmac_enable_channel(chan->rotation_out_chan);
+	}
+
+	ipu_ic_task_enable(chan->ic);
+
+	ipu_cpmem_dump(chan->in_chan);
+	ipu_cpmem_dump(chan->out_chan);
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		ipu_cpmem_dump(chan->rotation_in_chan);
+		ipu_cpmem_dump(chan->rotation_out_chan);
+	}
+
+	ipu_dump(priv->ipu);
+
+	return 0;
+}
+
+/* hold irqlock when calling */
+static int do_run(struct ipu_image_convert_run *run)
+{
+	struct ipu_image_convert_ctx *ctx = run->ctx;
+	struct ipu_image_convert_chan *chan = ctx->chan;
+
+	lockdep_assert_held(&chan->irqlock);
+
+	ctx->in.base.phys0 = run->in_phys;
+	ctx->out.base.phys0 = run->out_phys;
+
+	ctx->cur_buf_num = 0;
+	ctx->next_tile = 1;
+
+	/* remove run from pending_q and set as current */
+	list_del(&run->list);
+	chan->current_run = run;
+
+	return convert_start(run);
+}
+
+/* hold irqlock when calling */
+static void run_next(struct ipu_image_convert_chan *chan)
+{
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_run *run, *tmp;
+	int ret;
+
+	lockdep_assert_held(&chan->irqlock);
+
+	list_for_each_entry_safe(run, tmp, &chan->pending_q, list) {
+		/* skip contexts that are aborting */
+		if (run->ctx->aborting) {
+			dev_dbg(priv->ipu->dev,
+				"%s: task %u: skipping aborting ctx %p run %p\n",
+				__func__, chan->ic_task, run->ctx, run);
+			continue;
+		}
+
+		ret = do_run(run);
+		if (!ret)
+			break;
+
+		/*
+		 * something went wrong with start, add the run
+		 * to done q and continue to the next run in the
+		 * pending q.
+		 */
+		run->status = ret;
+		list_add_tail(&run->list, &chan->done_q);
+		chan->current_run = NULL;
+	}
+}
+
+static void empty_done_q(struct ipu_image_convert_chan *chan)
+{
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_run *run;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	while (!list_empty(&chan->done_q)) {
+		run = list_entry(chan->done_q.next,
+				 struct ipu_image_convert_run,
+				 list);
+
+		list_del(&run->list);
+
+		dev_dbg(priv->ipu->dev,
+			"%s: task %u: completing ctx %p run %p with %d\n",
+			__func__, chan->ic_task, run->ctx, run, run->status);
+
+		/* call the completion callback and free the run */
+		spin_unlock_irqrestore(&chan->irqlock, flags);
+		run->ctx->complete(run, run->ctx->complete_context);
+		spin_lock_irqsave(&chan->irqlock, flags);
+	}
+
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+}
+
+/*
+ * the bottom half thread clears out the done_q, calling the
+ * completion handler for each.
+ */
+static irqreturn_t do_bh(int irq, void *dev_id)
+{
+	struct ipu_image_convert_chan *chan = dev_id;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_ctx *ctx;
+	unsigned long flags;
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: enter\n", __func__,
+		chan->ic_task);
+
+	empty_done_q(chan);
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	/*
+	 * the done_q is cleared out, signal any contexts
+	 * that are aborting that abort can complete.
+	 */
+	list_for_each_entry(ctx, &chan->ctx_list, list) {
+		if (ctx->aborting) {
+			dev_dbg(priv->ipu->dev,
+				"%s: task %u: signaling abort for ctx %p\n",
+				__func__, chan->ic_task, ctx);
+			complete(&ctx->aborted);
+		}
+	}
+
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: exit\n", __func__,
+		chan->ic_task);
+
+	return IRQ_HANDLED;
+}
+
+/* hold irqlock when calling */
+static irqreturn_t do_irq(struct ipu_image_convert_run *run)
+{
+	struct ipu_image_convert_ctx *ctx = run->ctx;
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_tile *src_tile, *dst_tile;
+	struct ipu_image_convert_image *s_image = &ctx->in;
+	struct ipu_image_convert_image *d_image = &ctx->out;
+	struct ipuv3_channel *outch;
+	unsigned int dst_idx;
+
+	lockdep_assert_held(&chan->irqlock);
+
+	outch = ipu_rot_mode_is_irt(ctx->rot_mode) ?
+		chan->rotation_out_chan : chan->out_chan;
+
+	/*
+	 * It is difficult to stop the channel DMA before the channels
+	 * enter the paused state. Without double-buffering the channels
+	 * are always in a paused state when the EOF irq occurs, so it
+	 * is safe to stop the channels now. For double-buffering we
+	 * just ignore the abort until the operation completes, when it
+	 * is safe to shut down.
+	 */
+	if (ctx->aborting && !ctx->double_buffering) {
+		convert_stop(run);
+		run->status = -EIO;
+		goto done;
+	}
+
+	if (ctx->next_tile == ctx->num_tiles) {
+		/*
+		 * the conversion is complete
+		 */
+		convert_stop(run);
+		run->status = 0;
+		goto done;
+	}
+
+	/*
+	 * not done, place the next tile buffers.
+	 */
+	if (!ctx->double_buffering) {
+
+		src_tile = &s_image->tile[ctx->next_tile];
+		dst_idx = ctx->out_tile_map[ctx->next_tile];
+		dst_tile = &d_image->tile[dst_idx];
+
+		ipu_cpmem_set_buffer(chan->in_chan, 0,
+				     s_image->base.phys0 + src_tile->offset);
+		ipu_cpmem_set_buffer(outch, 0,
+				     d_image->base.phys0 + dst_tile->offset);
+		if (s_image->fmt->planar)
+			ipu_cpmem_set_uv_offset(chan->in_chan,
+						src_tile->u_off,
+						src_tile->v_off);
+		if (d_image->fmt->planar)
+			ipu_cpmem_set_uv_offset(outch,
+						dst_tile->u_off,
+						dst_tile->v_off);
+
+		ipu_idmac_select_buffer(chan->in_chan, 0);
+		ipu_idmac_select_buffer(outch, 0);
+
+	} else if (ctx->next_tile < ctx->num_tiles - 1) {
+
+		src_tile = &s_image->tile[ctx->next_tile + 1];
+		dst_idx = ctx->out_tile_map[ctx->next_tile + 1];
+		dst_tile = &d_image->tile[dst_idx];
+
+		ipu_cpmem_set_buffer(chan->in_chan, ctx->cur_buf_num,
+				     s_image->base.phys0 + src_tile->offset);
+		ipu_cpmem_set_buffer(outch, ctx->cur_buf_num,
+				     d_image->base.phys0 + dst_tile->offset);
+
+		ipu_idmac_select_buffer(chan->in_chan, ctx->cur_buf_num);
+		ipu_idmac_select_buffer(outch, ctx->cur_buf_num);
+
+		ctx->cur_buf_num ^= 1;
+	}
+
+	ctx->next_tile++;
+	return IRQ_HANDLED;
+done:
+	list_add_tail(&run->list, &chan->done_q);
+	chan->current_run = NULL;
+	run_next(chan);
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t norotate_irq(int irq, void *data)
+{
+	struct ipu_image_convert_chan *chan = data;
+	struct ipu_image_convert_ctx *ctx;
+	struct ipu_image_convert_run *run;
+	unsigned long flags;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	/* get current run and its context */
+	run = chan->current_run;
+	if (!run) {
+		ret = IRQ_NONE;
+		goto out;
+	}
+
+	ctx = run->ctx;
+
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		/* this is a rotation operation, just ignore */
+		spin_unlock_irqrestore(&chan->irqlock, flags);
+		return IRQ_HANDLED;
+	}
+
+	ret = do_irq(run);
+out:
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+	return ret;
+}
+
+static irqreturn_t rotate_irq(int irq, void *data)
+{
+	struct ipu_image_convert_chan *chan = data;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_ctx *ctx;
+	struct ipu_image_convert_run *run;
+	unsigned long flags;
+	irqreturn_t ret;
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	/* get current run and its context */
+	run = chan->current_run;
+	if (!run) {
+		ret = IRQ_NONE;
+		goto out;
+	}
+
+	ctx = run->ctx;
+
+	if (!ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		/* this was NOT a rotation operation, shouldn't happen */
+		dev_err(priv->ipu->dev, "Unexpected rotation interrupt\n");
+		spin_unlock_irqrestore(&chan->irqlock, flags);
+		return IRQ_HANDLED;
+	}
+
+	ret = do_irq(run);
+out:
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+	return ret;
+}
+
+/*
+ * try to force the completion of runs for this ctx. Called when
+ * abort wait times out in ipu_image_convert_abort().
+ */
+static void force_abort(struct ipu_image_convert_ctx *ctx)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_run *run;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	run = chan->current_run;
+	if (run && run->ctx == ctx) {
+		convert_stop(run);
+		run->status = -EIO;
+		list_add_tail(&run->list, &chan->done_q);
+		chan->current_run = NULL;
+		run_next(chan);
+	}
+
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+
+	empty_done_q(chan);
+}
+
+static void release_ipu_resources(struct ipu_image_convert_chan *chan)
+{
+	if (chan->out_eof_irq >= 0)
+		free_irq(chan->out_eof_irq, chan);
+	if (chan->rot_out_eof_irq >= 0)
+		free_irq(chan->rot_out_eof_irq, chan);
+
+	if (!IS_ERR_OR_NULL(chan->in_chan))
+		ipu_idmac_put(chan->in_chan);
+	if (!IS_ERR_OR_NULL(chan->out_chan))
+		ipu_idmac_put(chan->out_chan);
+	if (!IS_ERR_OR_NULL(chan->rotation_in_chan))
+		ipu_idmac_put(chan->rotation_in_chan);
+	if (!IS_ERR_OR_NULL(chan->rotation_out_chan))
+		ipu_idmac_put(chan->rotation_out_chan);
+	if (!IS_ERR_OR_NULL(chan->ic))
+		ipu_ic_put(chan->ic);
+
+	chan->in_chan = chan->out_chan = chan->rotation_in_chan =
+		chan->rotation_out_chan = NULL;
+	chan->out_eof_irq = chan->rot_out_eof_irq = -1;
+}
+
+static int get_ipu_resources(struct ipu_image_convert_chan *chan)
+{
+	const struct ipu_image_convert_dma_chan *dma = chan->dma_ch;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	int ret;
+
+	/* get IC */
+	chan->ic = ipu_ic_get(priv->ipu, chan->ic_task);
+	if (IS_ERR(chan->ic)) {
+		dev_err(priv->ipu->dev, "could not acquire IC\n");
+		ret = PTR_ERR(chan->ic);
+		goto err;
+	}
+
+	/* get IDMAC channels */
+	chan->in_chan = ipu_idmac_get(priv->ipu, dma->in);
+	chan->out_chan = ipu_idmac_get(priv->ipu, dma->out);
+	if (IS_ERR(chan->in_chan) || IS_ERR(chan->out_chan)) {
+		dev_err(priv->ipu->dev, "could not acquire idmac channels\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	chan->rotation_in_chan = ipu_idmac_get(priv->ipu, dma->rot_in);
+	chan->rotation_out_chan = ipu_idmac_get(priv->ipu, dma->rot_out);
+	if (IS_ERR(chan->rotation_in_chan) || IS_ERR(chan->rotation_out_chan)) {
+		dev_err(priv->ipu->dev,
+			"could not acquire idmac rotation channels\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* acquire the EOF interrupts */
+	chan->out_eof_irq = ipu_idmac_channel_irq(priv->ipu,
+						  chan->out_chan,
+						  IPU_IRQ_EOF);
+
+	ret = request_threaded_irq(chan->out_eof_irq, norotate_irq, do_bh,
+				   0, "ipu-ic", chan);
+	if (ret < 0) {
+		dev_err(priv->ipu->dev, "could not acquire irq %d\n",
+			 chan->out_eof_irq);
+		chan->out_eof_irq = -1;
+		goto err;
+	}
+
+	chan->rot_out_eof_irq = ipu_idmac_channel_irq(priv->ipu,
+						     chan->rotation_out_chan,
+						     IPU_IRQ_EOF);
+
+	ret = request_threaded_irq(chan->rot_out_eof_irq, rotate_irq, do_bh,
+				   0, "ipu-ic", chan);
+	if (ret < 0) {
+		dev_err(priv->ipu->dev, "could not acquire irq %d\n",
+			chan->rot_out_eof_irq);
+		chan->rot_out_eof_irq = -1;
+		goto err;
+	}
+
+	return 0;
+err:
+	release_ipu_resources(chan);
+	return ret;
+}
+
+static int fill_image(struct ipu_image_convert_ctx *ctx,
+		      struct ipu_image_convert_image *ic_image,
+		      struct ipu_image *image,
+		      enum ipu_image_convert_type type)
+{
+	struct ipu_image_convert_priv *priv = ctx->chan->priv;
+
+	ic_image->base = *image;
+	ic_image->type = type;
+
+	ic_image->fmt = get_format(image->pix.pixelformat);
+	if (!ic_image->fmt) {
+		dev_err(priv->ipu->dev, "pixelformat not supported for %s\n",
+			type == IMAGE_CONVERT_OUT ? "Output" : "Input");
+		return -EINVAL;
+	}
+
+	if (ic_image->fmt->planar)
+		ic_image->stride = ic_image->base.pix.width;
+	else
+		ic_image->stride  = ic_image->base.pix.bytesperline;
+
+	calc_tile_dimensions(ctx, ic_image);
+	calc_tile_offsets(ctx, ic_image);
+
+	return 0;
+}
+
+/* borrowed from drivers/media/v4l2-core/v4l2-common.c */
+static unsigned int clamp_align(unsigned int x, unsigned int min,
+				unsigned int max, unsigned int align)
+{
+	/* Bits that must be zero to be aligned */
+	unsigned int mask = ~((1 << align) - 1);
+
+	/* Clamp to aligned min and max */
+	x = clamp(x, (min + ~mask) & mask, max & mask);
+
+	/* Round to nearest aligned value */
+	if (align)
+		x = (x + (1 << (align - 1))) & mask;
+
+	return x;
+}
+
+/*
+ * We have to adjust the tile width such that the tile physaddrs and
+ * U and V plane offsets are multiples of 8 bytes as required by
+ * the IPU DMA Controller. For the planar formats, this corresponds
+ * to a pixel alignment of 16 (but use a more formal equation since
+ * the variables are available). For all the packed formats, 8 is
+ * good enough.
+ */
+static inline u32 tile_width_align(const struct ipu_image_pixfmt *fmt)
+{
+	return fmt->planar ? 8 * fmt->uv_width_dec : 8;
+}
+
+/*
+ * For tile height alignment, we have to ensure that the output tile
+ * heights are multiples of 8 lines if the IRT is required by the
+ * given rotation mode (the IRT performs rotations on 8x8 blocks
+ * at a time). If the IRT is not used, or for input image tiles,
+ * 2 lines are good enough.
+ */
+static inline u32 tile_height_align(enum ipu_image_convert_type type,
+				    enum ipu_rotate_mode rot_mode)
+{
+	return (type == IMAGE_CONVERT_OUT &&
+		ipu_rot_mode_is_irt(rot_mode)) ? 8 : 2;
+}
+
+/* Adjusts input/output images to IPU restrictions */
+void ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out,
+			      enum ipu_rotate_mode rot_mode)
+{
+	const struct ipu_image_pixfmt *infmt, *outfmt;
+	unsigned int num_in_rows, num_in_cols;
+	unsigned int num_out_rows, num_out_cols;
+	u32 w_align, h_align;
+
+	infmt = get_format(in->pix.pixelformat);
+	outfmt = get_format(out->pix.pixelformat);
+
+	/* set some default pixel formats if needed */
+	if (!infmt) {
+		in->pix.pixelformat = V4L2_PIX_FMT_RGB24;
+		infmt = get_format(V4L2_PIX_FMT_RGB24);
+	}
+	if (!outfmt) {
+		out->pix.pixelformat = V4L2_PIX_FMT_RGB24;
+		outfmt = get_format(V4L2_PIX_FMT_RGB24);
+	}
+
+	/* image converter does not handle fields */
+	in->pix.field = out->pix.field = V4L2_FIELD_NONE;
+
+	/* resizer cannot downsize more than 4:1 */
+	if (ipu_rot_mode_is_irt(rot_mode)) {
+		out->pix.height = max_t(__u32, out->pix.height,
+					in->pix.width / 4);
+		out->pix.width = max_t(__u32, out->pix.width,
+				       in->pix.height / 4);
+	} else {
+		out->pix.width = max_t(__u32, out->pix.width,
+				       in->pix.width / 4);
+		out->pix.height = max_t(__u32, out->pix.height,
+					in->pix.height / 4);
+	}
+
+	/* get tiling rows/cols from output format */
+	num_out_rows = num_stripes(out->pix.height);
+	num_out_cols = num_stripes(out->pix.width);
+	if (ipu_rot_mode_is_irt(rot_mode)) {
+		num_in_rows = num_out_cols;
+		num_in_cols = num_out_rows;
+	} else {
+		num_in_rows = num_out_rows;
+		num_in_cols = num_out_cols;
+	}
+
+	/* align input width/height */
+	w_align = ilog2(tile_width_align(infmt) * num_in_cols);
+	h_align = ilog2(tile_height_align(IMAGE_CONVERT_IN, rot_mode) *
+			num_in_rows);
+	in->pix.width = clamp_align(in->pix.width, MIN_W, MAX_W, w_align);
+	in->pix.height = clamp_align(in->pix.height, MIN_H, MAX_H, h_align);
+
+	/* align output width/height */
+	w_align = ilog2(tile_width_align(outfmt) * num_out_cols);
+	h_align = ilog2(tile_height_align(IMAGE_CONVERT_OUT, rot_mode) *
+			num_out_rows);
+	out->pix.width = clamp_align(out->pix.width, MIN_W, MAX_W, w_align);
+	out->pix.height = clamp_align(out->pix.height, MIN_H, MAX_H, h_align);
+
+	/* set input/output strides and image sizes */
+	in->pix.bytesperline = (in->pix.width * infmt->bpp) >> 3;
+	in->pix.sizeimage = in->pix.height * in->pix.bytesperline;
+	out->pix.bytesperline = (out->pix.width * outfmt->bpp) >> 3;
+	out->pix.sizeimage = out->pix.height * out->pix.bytesperline;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_adjust);
+
+/*
+ * this is used by ipu_image_convert_prepare() to verify set input and
+ * output images are valid before starting the conversion. Clients can
+ * also call it before calling ipu_image_convert_prepare().
+ */
+int ipu_image_convert_verify(struct ipu_image *in, struct ipu_image *out,
+			     enum ipu_rotate_mode rot_mode)
+{
+	struct ipu_image testin, testout;
+
+	testin = *in;
+	testout = *out;
+
+	ipu_image_convert_adjust(&testin, &testout, rot_mode);
+
+	if (testin.pix.width != in->pix.width ||
+	    testin.pix.height != in->pix.height ||
+	    testout.pix.width != out->pix.width ||
+	    testout.pix.height != out->pix.height)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_verify);
+
+/*
+ * Call ipu_image_convert_prepare() to prepare for the conversion of
+ * given images and rotation mode. Returns a new conversion context.
+ */
+struct ipu_image_convert_ctx *
+ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
+			  struct ipu_image *in, struct ipu_image *out,
+			  enum ipu_rotate_mode rot_mode,
+			  ipu_image_convert_cb_t complete,
+			  void *complete_context)
+{
+	struct ipu_image_convert_priv *priv = ipu->image_convert_priv;
+	struct ipu_image_convert_image *s_image, *d_image;
+	struct ipu_image_convert_chan *chan;
+	struct ipu_image_convert_ctx *ctx;
+	unsigned long flags;
+	bool get_res;
+	int ret;
+
+	if (!in || !out || !complete ||
+	    (ic_task != IC_TASK_VIEWFINDER &&
+	     ic_task != IC_TASK_POST_PROCESSOR))
+		return ERR_PTR(-EINVAL);
+
+	/* verify the in/out images before continuing */
+	ret = ipu_image_convert_verify(in, out, rot_mode);
+	if (ret) {
+		dev_err(priv->ipu->dev, "%s: in/out formats invalid\n",
+			__func__);
+		return ERR_PTR(ret);
+	}
+
+	chan = &priv->chan[ic_task];
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return ERR_PTR(-ENOMEM);
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: ctx %p\n", __func__,
+		chan->ic_task, ctx);
+
+	ctx->chan = chan;
+	init_completion(&ctx->aborted);
+
+	s_image = &ctx->in;
+	d_image = &ctx->out;
+
+	/* set tiling and rotation */
+	d_image->num_rows = num_stripes(out->pix.height);
+	d_image->num_cols = num_stripes(out->pix.width);
+	if (ipu_rot_mode_is_irt(rot_mode)) {
+		s_image->num_rows = d_image->num_cols;
+		s_image->num_cols = d_image->num_rows;
+	} else {
+		s_image->num_rows = d_image->num_rows;
+		s_image->num_cols = d_image->num_cols;
+	}
+
+	ctx->num_tiles = d_image->num_cols * d_image->num_rows;
+	ctx->rot_mode = rot_mode;
+
+	ret = fill_image(ctx, s_image, in, IMAGE_CONVERT_IN);
+	if (ret)
+		goto out_free;
+	ret = fill_image(ctx, d_image, out, IMAGE_CONVERT_OUT);
+	if (ret)
+		goto out_free;
+
+	calc_out_tile_map(ctx);
+
+	dump_format(ctx, s_image);
+	dump_format(ctx, d_image);
+
+	ctx->complete = complete;
+	ctx->complete_context = complete_context;
+
+	/*
+	 * Can we use double-buffering for this operation? If there is
+	 * only one tile (the whole image can be converted in a single
+	 * operation) there's no point in using double-buffering. Also,
+	 * the IPU's IDMAC channels allow only a single U and V plane
+	 * offset shared between both buffers, but these offsets change
+	 * for every tile, and therefore would have to be updated for
+	 * each buffer which is not possible. So double-buffering is
+	 * impossible when either the source or destination images are
+	 * a planar format (YUV420, YUV422P, etc.).
+	 */
+	ctx->double_buffering = (ctx->num_tiles > 1 &&
+				 !s_image->fmt->planar &&
+				 !d_image->fmt->planar);
+
+	if (ipu_rot_mode_is_irt(ctx->rot_mode)) {
+		ret = alloc_dma_buf(priv, &ctx->rot_intermediate[0],
+				    d_image->tile[0].size);
+		if (ret)
+			goto out_free;
+		if (ctx->double_buffering) {
+			ret = alloc_dma_buf(priv,
+					    &ctx->rot_intermediate[1],
+					    d_image->tile[0].size);
+			if (ret)
+				goto out_free_dmabuf0;
+		}
+	}
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	get_res = list_empty(&chan->ctx_list);
+
+	list_add_tail(&ctx->list, &chan->ctx_list);
+
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+
+	if (get_res) {
+		ret = get_ipu_resources(chan);
+		if (ret)
+			goto out_free_dmabuf1;
+	}
+
+	return ctx;
+
+out_free_dmabuf1:
+	free_dma_buf(priv, &ctx->rot_intermediate[1]);
+	spin_lock_irqsave(&chan->irqlock, flags);
+	list_del(&ctx->list);
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+out_free_dmabuf0:
+	free_dma_buf(priv, &ctx->rot_intermediate[0]);
+out_free:
+	kfree(ctx);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_prepare);
+
+/*
+ * Carry out a single image conversion run. Only the physaddr's of the input
+ * and output image buffers are needed. The conversion context must have
+ * been created previously with ipu_image_convert_prepare().
+ */
+int ipu_image_convert_queue(struct ipu_image_convert_run *run)
+{
+	struct ipu_image_convert_chan *chan;
+	struct ipu_image_convert_priv *priv;
+	struct ipu_image_convert_ctx *ctx;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!run || !run->ctx || !run->in_phys || !run->out_phys)
+		return -EINVAL;
+
+	ctx = run->ctx;
+	chan = ctx->chan;
+	priv = chan->priv;
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: ctx %p run %p\n", __func__,
+		chan->ic_task, ctx, run);
+
+	INIT_LIST_HEAD(&run->list);
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	if (ctx->aborting) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	list_add_tail(&run->list, &chan->pending_q);
+
+	if (!chan->current_run) {
+		ret = do_run(run);
+		if (ret)
+			chan->current_run = NULL;
+	}
+unlock:
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_queue);
+
+/* Abort any active or pending conversions for this context */
+static void __ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	struct ipu_image_convert_run *run, *active_run, *tmp;
+	unsigned long flags;
+	int run_count, ret;
+	bool need_abort;
+
+	reinit_completion(&ctx->aborted);
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	/* move all remaining pending runs in this context to done_q */
+	list_for_each_entry_safe(run, tmp, &chan->pending_q, list) {
+		if (run->ctx != ctx)
+			continue;
+		run->status = -EIO;
+		list_move_tail(&run->list, &chan->done_q);
+	}
+
+	run_count = get_run_count(ctx, &chan->done_q);
+	active_run = (chan->current_run && chan->current_run->ctx == ctx) ?
+		chan->current_run : NULL;
+
+	need_abort = (run_count || active_run);
+
+	ctx->aborting = true;
+
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+
+	if (!need_abort) {
+		dev_dbg(priv->ipu->dev,
+			"%s: task %u: no abort needed for ctx %p\n",
+			__func__, chan->ic_task, ctx);
+		return;
+	}
+
+	dev_dbg(priv->ipu->dev,
+		"%s: task %u: wait for completion: %d runs, active run %p\n",
+		__func__, chan->ic_task, run_count, active_run);
+
+	ret = wait_for_completion_timeout(&ctx->aborted,
+					  msecs_to_jiffies(10000));
+	if (ret == 0) {
+		dev_warn(priv->ipu->dev, "%s: timeout\n", __func__);
+		force_abort(ctx);
+	}
+}
+
+void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
+{
+	__ipu_image_convert_abort(ctx);
+	ctx->aborting = false;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_abort);
+
+/* Unprepare image conversion context */
+void ipu_image_convert_unprepare(struct ipu_image_convert_ctx *ctx)
+{
+	struct ipu_image_convert_chan *chan = ctx->chan;
+	struct ipu_image_convert_priv *priv = chan->priv;
+	unsigned long flags;
+	bool put_res;
+
+	/* make sure no runs are hanging around */
+	__ipu_image_convert_abort(ctx);
+
+	dev_dbg(priv->ipu->dev, "%s: task %u: removing ctx %p\n", __func__,
+		chan->ic_task, ctx);
+
+	spin_lock_irqsave(&chan->irqlock, flags);
+
+	list_del(&ctx->list);
+
+	put_res = list_empty(&chan->ctx_list);
+
+	spin_unlock_irqrestore(&chan->irqlock, flags);
+
+	if (put_res)
+		release_ipu_resources(chan);
+
+	free_dma_buf(priv, &ctx->rot_intermediate[1]);
+	free_dma_buf(priv, &ctx->rot_intermediate[0]);
+
+	kfree(ctx);
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_unprepare);
+
+/*
+ * "Canned" asynchronous single image conversion. Allocates and returns
+ * a new conversion run.  On successful return the caller must free the
+ * run and call ipu_image_convert_unprepare() after conversion completes.
+ */
+struct ipu_image_convert_run *
+ipu_image_convert(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
+		  struct ipu_image *in, struct ipu_image *out,
+		  enum ipu_rotate_mode rot_mode,
+		  ipu_image_convert_cb_t complete,
+		  void *complete_context)
+{
+	struct ipu_image_convert_ctx *ctx;
+	struct ipu_image_convert_run *run;
+	int ret;
+
+	ctx = ipu_image_convert_prepare(ipu, ic_task, in, out, rot_mode,
+					complete, complete_context);
+	if (IS_ERR(ctx))
+		return ERR_CAST(ctx);
+
+	run = kzalloc(sizeof(*run), GFP_KERNEL);
+	if (!run) {
+		ipu_image_convert_unprepare(ctx);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	run->ctx = ctx;
+	run->in_phys = in->phys0;
+	run->out_phys = out->phys0;
+
+	ret = ipu_image_convert_queue(run);
+	if (ret) {
+		ipu_image_convert_unprepare(ctx);
+		kfree(run);
+		return ERR_PTR(ret);
+	}
+
+	return run;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert);
+
+/* "Canned" synchronous single image conversion */
+static void image_convert_sync_complete(struct ipu_image_convert_run *run,
+					void *data)
+{
+	struct completion *comp = data;
+
+	complete(comp);
+}
+
+int ipu_image_convert_sync(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
+			   struct ipu_image *in, struct ipu_image *out,
+			   enum ipu_rotate_mode rot_mode)
+{
+	struct ipu_image_convert_run *run;
+	struct completion comp;
+	int ret;
+
+	init_completion(&comp);
+
+	run = ipu_image_convert(ipu, ic_task, in, out, rot_mode,
+				image_convert_sync_complete, &comp);
+	if (IS_ERR(run))
+		return PTR_ERR(run);
+
+	ret = wait_for_completion_timeout(&comp, msecs_to_jiffies(10000));
+	ret = (ret == 0) ? -ETIMEDOUT : 0;
+
+	ipu_image_convert_unprepare(run->ctx);
+	kfree(run);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ipu_image_convert_sync);
+
+int ipu_image_convert_init(struct ipu_soc *ipu, struct device *dev)
+{
+	struct ipu_image_convert_priv *priv;
+	int i;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ipu->image_convert_priv = priv;
+	priv->ipu = ipu;
+
+	for (i = 0; i < IC_NUM_TASKS; i++) {
+		struct ipu_image_convert_chan *chan = &priv->chan[i];
+
+		chan->ic_task = i;
+		chan->priv = priv;
+		chan->dma_ch = &image_convert_dma_chan[i];
+		chan->out_eof_irq = -1;
+		chan->rot_out_eof_irq = -1;
+
+		spin_lock_init(&chan->irqlock);
+		INIT_LIST_HEAD(&chan->ctx_list);
+		INIT_LIST_HEAD(&chan->pending_q);
+		INIT_LIST_HEAD(&chan->done_q);
+	}
+
+	return 0;
+}
+
+void ipu_image_convert_exit(struct ipu_soc *ipu)
+{
+}