[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/drivers/irqchip/irq-ompic.c b/src/kernel/linux/v4.19/drivers/irqchip/irq-ompic.c
new file mode 100644
index 0000000..e66ef43
--- /dev/null
+++ b/src/kernel/linux/v4.19/drivers/irqchip/irq-ompic.c
@@ -0,0 +1,202 @@
+/*
+ * Open Multi-Processor Interrupt Controller driver
+ *
+ * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+ * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * The ompic device handles IPI communication between cores in multi-core
+ * OpenRISC systems.
+ *
+ * Registers
+ *
+ * For each CPU the ompic has 2 registers. The control register for sending
+ * and acking IPIs and the status register for receiving IPIs. The register
+ * layouts are as follows:
+ *
+ * Control register
+ * +---------+---------+----------+---------+
+ * | 31 | 30 | 29 .. 16 | 15 .. 0 |
+ * ----------+---------+----------+----------
+ * | IRQ ACK | IRQ GEN | DST CORE | DATA |
+ * +---------+---------+----------+---------+
+ *
+ * Status register
+ * +----------+-------------+----------+---------+
+ * | 31 | 30 | 29 .. 16 | 15 .. 0 |
+ * -----------+-------------+----------+---------+
+ * | Reserved | IRQ Pending | SRC CORE | DATA |
+ * +----------+-------------+----------+---------+
+ *
+ * Architecture
+ *
+ * - The ompic generates a level interrupt to the CPU PIC when a message is
+ * ready. Messages are delivered via the memory bus.
+ * - The ompic does not have any interrupt input lines.
+ * - The ompic is wired to the same irq line on each core.
+ * - Devices are wired to the same irq line on each core.
+ *
+ * +---------+ +---------+
+ * | CPU | | CPU |
+ * | Core 0 |<==\ (memory access) /==>| Core 1 |
+ * | [ PIC ]| | | | [ PIC ]|
+ * +----^-^--+ | | +----^-^--+
+ * | | v v | |
+ * <====|=|=================================|=|==> (memory bus)
+ * | | ^ ^ | |
+ * (ipi | +------|---------+--------|-------|-+ (device irq)
+ * irq | | | | |
+ * core0)| +------|---------|--------|-------+ (ipi irq core1)
+ * | | | | |
+ * +----o-o-+ | +--------+ |
+ * | ompic |<===/ | Device |<===/
+ * | IPI | +--------+
+ * +--------+*
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <linux/irqchip.h>
+
+#define OMPIC_CPUBYTES 8
+#define OMPIC_CTRL(cpu) (0x0 + (cpu * OMPIC_CPUBYTES))
+#define OMPIC_STAT(cpu) (0x4 + (cpu * OMPIC_CPUBYTES))
+
+#define OMPIC_CTRL_IRQ_ACK (1 << 31)
+#define OMPIC_CTRL_IRQ_GEN (1 << 30)
+#define OMPIC_CTRL_DST(cpu) (((cpu) & 0x3fff) << 16)
+
+#define OMPIC_STAT_IRQ_PENDING (1 << 30)
+
+#define OMPIC_DATA(x) ((x) & 0xffff)
+
+DEFINE_PER_CPU(unsigned long, ops);
+
+static void __iomem *ompic_base;
+
+static inline u32 ompic_readreg(void __iomem *base, loff_t offset)
+{
+ return ioread32be(base + offset);
+}
+
+static void ompic_writereg(void __iomem *base, loff_t offset, u32 data)
+{
+ iowrite32be(data, base + offset);
+}
+
+static void ompic_raise_softirq(const struct cpumask *mask,
+ unsigned int ipi_msg)
+{
+ unsigned int dst_cpu;
+ unsigned int src_cpu = smp_processor_id();
+
+ for_each_cpu(dst_cpu, mask) {
+ set_bit(ipi_msg, &per_cpu(ops, dst_cpu));
+
+ /*
+ * On OpenRISC the atomic set_bit() call implies a memory
+ * barrier. Otherwise we would need: smp_wmb(); paired
+ * with the read in ompic_ipi_handler.
+ */
+
+ ompic_writereg(ompic_base, OMPIC_CTRL(src_cpu),
+ OMPIC_CTRL_IRQ_GEN |
+ OMPIC_CTRL_DST(dst_cpu) |
+ OMPIC_DATA(1));
+ }
+}
+
+static irqreturn_t ompic_ipi_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long *pending_ops = &per_cpu(ops, cpu);
+ unsigned long ops;
+
+ ompic_writereg(ompic_base, OMPIC_CTRL(cpu), OMPIC_CTRL_IRQ_ACK);
+ while ((ops = xchg(pending_ops, 0)) != 0) {
+
+ /*
+ * On OpenRISC the atomic xchg() call implies a memory
+ * barrier. Otherwise we may need an smp_rmb(); paired
+ * with the write in ompic_raise_softirq.
+ */
+
+ do {
+ unsigned long ipi_msg;
+
+ ipi_msg = __ffs(ops);
+ ops &= ~(1UL << ipi_msg);
+
+ handle_IPI(ipi_msg);
+ } while (ops);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init ompic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct resource res;
+ int irq;
+ int ret;
+
+ /* Validate the DT */
+ if (ompic_base) {
+ pr_err("ompic: duplicate ompic's are not supported");
+ return -EEXIST;
+ }
+
+ if (of_address_to_resource(node, 0, &res)) {
+ pr_err("ompic: reg property requires an address and size");
+ return -EINVAL;
+ }
+
+ if (resource_size(&res) < (num_possible_cpus() * OMPIC_CPUBYTES)) {
+ pr_err("ompic: reg size, currently %d must be at least %d",
+ resource_size(&res),
+ (num_possible_cpus() * OMPIC_CPUBYTES));
+ return -EINVAL;
+ }
+
+ /* Setup the device */
+ ompic_base = ioremap(res.start, resource_size(&res));
+ if (!ompic_base) {
+ pr_err("ompic: unable to map registers");
+ return -ENOMEM;
+ }
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0) {
+ pr_err("ompic: unable to parse device irq");
+ ret = -EINVAL;
+ goto out_unmap;
+ }
+
+ ret = request_irq(irq, ompic_ipi_handler, IRQF_PERCPU,
+ "ompic_ipi", NULL);
+ if (ret)
+ goto out_irq_disp;
+
+ set_smp_cross_call(ompic_raise_softirq);
+
+ return 0;
+
+out_irq_disp:
+ irq_dispose_mapping(irq);
+out_unmap:
+ iounmap(ompic_base);
+ ompic_base = NULL;
+ return ret;
+}
+IRQCHIP_DECLARE(ompic, "openrisc,ompic", ompic_of_init);