[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/drivers/soc/qcom/Kconfig b/src/kernel/linux/v4.19/drivers/soc/qcom/Kconfig
new file mode 100644
index 0000000..ba79b60
--- /dev/null
+++ b/src/kernel/linux/v4.19/drivers/soc/qcom/Kconfig
@@ -0,0 +1,166 @@
+#
+# QCOM Soc drivers
+#
+menu "Qualcomm SoC drivers"
+
+config QCOM_COMMAND_DB
+ bool "Qualcomm Command DB"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on OF_RESERVED_MEM
+ help
+ Command DB queries shared memory by key string for shared system
+ resources. Platform drivers that require to set state of a shared
+ resource on a RPM-hardened platform must use this database to get
+ SoC specific identifier and information for the shared resources.
+
+config QCOM_GENI_SE
+ tristate "QCOM GENI Serial Engine Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This driver is used to manage Generic Interface (GENI) firmware based
+ Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
+ driver is also used to manage the common aspects of multiple Serial
+ Engines present in the QUP.
+
+config QCOM_GLINK_SSR
+ tristate "Qualcomm Glink SSR driver"
+ depends on RPMSG
+ depends on QCOM_RPROC_COMMON
+ help
+ Say y here to enable GLINK SSR support. The GLINK SSR driver
+ implements the SSR protocol for notifying the remote processor about
+ neighboring subsystems going up or down.
+
+config QCOM_GSBI
+ tristate "QCOM General Serial Bus Interface"
+ depends on ARCH_QCOM
+ select MFD_SYSCON
+ help
+ Say y here to enable GSBI support. The GSBI provides control
+ functions for connecting the underlying serial UART, SPI, and I2C
+ devices to the output pins.
+
+config QCOM_LLCC
+ tristate "Qualcomm Technologies, Inc. LLCC driver"
+ depends on ARCH_QCOM
+ help
+ Qualcomm Technologies, Inc. platform specific
+ Last Level Cache Controller(LLCC) driver. This provides interfaces
+ to clients that use the LLCC. Say yes here to enable LLCC slice
+ driver.
+
+config QCOM_SDM845_LLCC
+ tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
+ depends on QCOM_LLCC
+ help
+ Say yes here to enable the LLCC driver for SDM845. This provides
+ data required to configure LLCC so that clients can start using the
+ LLCC slices.
+
+config QCOM_MDT_LOADER
+ tristate
+ select QCOM_SCM
+
+config QCOM_PM
+ bool "Qualcomm Power Management"
+ depends on ARCH_QCOM && !ARM64
+ select ARM_CPU_SUSPEND
+ select QCOM_SCM
+ help
+ QCOM Platform specific power driver to manage cores and L2 low power
+ modes. It interface with various system drivers to put the cores in
+ low power modes.
+
+config QCOM_QMI_HELPERS
+ tristate
+ depends on ARCH_QCOM && NET
+ help
+ Helper library for handling QMI encoded messages. QMI encoded
+ messages are used in communication between the majority of QRTR
+ clients and this helpers provide the common functionality needed for
+ doing this from a kernel driver.
+
+config QCOM_RMTFS_MEM
+ tristate "Qualcomm Remote Filesystem memory driver"
+ depends on ARCH_QCOM
+ select QCOM_SCM
+ help
+ The Qualcomm remote filesystem memory driver is used for allocating
+ and exposing regions of shared memory with remote processors for the
+ purpose of exchanging sector-data between the remote filesystem
+ service and its clients.
+
+ Say y here if you intend to boot the modem remoteproc.
+
+config QCOM_RPMH
+ bool "Qualcomm RPM-Hardened (RPMH) Communication"
+ depends on ARCH_QCOM && ARM64 && OF || COMPILE_TEST
+ help
+ Support for communication with the hardened-RPM blocks in
+ Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
+ internal bus to transmit state requests for shared resources. A set
+ of hardware components aggregate requests for these resources and
+ help apply the aggregated state on the resource.
+
+config QCOM_SMEM
+ tristate "Qualcomm Shared Memory Manager (SMEM)"
+ depends on ARCH_QCOM
+ depends on HWSPINLOCK
+ help
+ Say y here to enable support for the Qualcomm Shared Memory Manager.
+ The driver provides an interface to items in a heap shared among all
+ processors in a Qualcomm platform.
+
+config QCOM_SMD_RPM
+ tristate "Qualcomm Resource Power Manager (RPM) over SMD"
+ depends on ARCH_QCOM
+ depends on RPMSG && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8974 based
+ devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom-smd-rpm".
+
+config QCOM_SMEM_STATE
+ bool
+
+config QCOM_SMP2P
+ tristate "Qualcomm Shared Memory Point to Point support"
+ depends on MAILBOX
+ depends on QCOM_SMEM
+ select QCOM_SMEM_STATE
+ help
+ Say yes here to support the Qualcomm Shared Memory Point to Point
+ protocol.
+
+config QCOM_SMSM
+ tristate "Qualcomm Shared Memory State Machine"
+ depends on QCOM_SMEM
+ select QCOM_SMEM_STATE
+ help
+ Say yes here to support the Qualcomm Shared Memory State Machine.
+ The state machine is represented by bits in shared memory.
+
+config QCOM_WCNSS_CTRL
+ tristate "Qualcomm WCNSS control driver"
+ depends on ARCH_QCOM
+ depends on RPMSG
+ help
+ Client driver for the WCNSS_CTRL SMD channel, used to download nv
+ firmware to a newly booted WCNSS chip.
+
+config QCOM_APR
+ tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
+ depends on ARCH_QCOM
+ depends on RPMSG
+ help
+ Enable APR IPC protocol support between
+ application processor and QDSP6. APR is
+ used by audio driver to configure QDSP6
+ ASM, ADM and AFE modules.
+endmenu