[Feature] add GA346 baseline version
Change-Id: Ic62933698569507dcf98240cdf5d9931ae34348f
diff --git a/src/kernel/linux/v4.19/drivers/usb/dwc3/Kconfig b/src/kernel/linux/v4.19/drivers/usb/dwc3/Kconfig
new file mode 100644
index 0000000..518ead1
--- /dev/null
+++ b/src/kernel/linux/v4.19/drivers/usb/dwc3/Kconfig
@@ -0,0 +1,126 @@
+config USB_DWC3
+ tristate "DesignWare USB3 DRD Core Support"
+ depends on (USB || USB_GADGET) && HAS_DMA
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
+ help
+ Say Y or M here if your system has a Dual Role SuperSpeed
+ USB controller based on the DesignWare USB3 IP Core.
+
+ If you choose to build this driver is a dynamically linked
+ module, the module will be called dwc3.ko.
+
+if USB_DWC3
+
+config USB_DWC3_ULPI
+ bool "Register ULPI PHY Interface"
+ depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
+ help
+ Select this if you have ULPI type PHY attached to your DWC3
+ controller.
+
+choice
+ bool "DWC3 Mode Selection"
+ default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
+ default USB_DWC3_HOST if (USB && !USB_GADGET)
+ default USB_DWC3_GADGET if (!USB && USB_GADGET)
+
+config USB_DWC3_HOST
+ bool "Host only mode"
+ depends on USB=y || USB=USB_DWC3
+ help
+ Select this when you want to use DWC3 in host mode only,
+ thereby the gadget feature will be regressed.
+
+config USB_DWC3_GADGET
+ bool "Gadget only mode"
+ depends on USB_GADGET=y || USB_GADGET=USB_DWC3
+ help
+ Select this when you want to use DWC3 in gadget mode only,
+ thereby the host feature will be regressed.
+
+config USB_DWC3_DUAL_ROLE
+ bool "Dual Role mode"
+ depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
+ depends on (EXTCON=y || EXTCON=USB_DWC3)
+ help
+ This is the default mode of working of DWC3 controller where
+ both host and gadget features are enabled.
+
+endchoice
+
+comment "Platform Glue Driver Support"
+
+config USB_DWC3_OMAP
+ tristate "Texas Instruments OMAP5 and similar Platforms"
+ depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST)
+ depends on OF
+ default USB_DWC3
+ help
+ Some platforms from Texas Instruments like OMAP5, DRA7xxx and
+ AM437x use this IP for USB2/3 functionality.
+
+ Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_EXYNOS
+ tristate "Samsung Exynos Platform"
+ depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
+ default USB_DWC3
+ help
+ Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
+ say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_PCI
+ tristate "PCIe-based Platforms"
+ depends on USB_PCI && ACPI
+ default USB_DWC3
+ help
+ If you're using the DesignWare Core IP with a PCIe (but not HAPS
+ platform), please say 'Y' or 'M' here.
+
+config USB_DWC3_HAPS
+ tristate "Synopsys PCIe-based HAPS Platforms"
+ depends on USB_PCI
+ default USB_DWC3
+ help
+ If you're using the DesignWare Core IP with a Synopsys PCIe HAPS
+ platform, please say 'Y' or 'M' here.
+
+config USB_DWC3_KEYSTONE
+ tristate "Texas Instruments Keystone2 Platforms"
+ depends on ARCH_KEYSTONE || COMPILE_TEST
+ default USB_DWC3
+ help
+ Support of USB2/3 functionality in TI Keystone2 platforms.
+ Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_OF_SIMPLE
+ tristate "Generic OF Simple Glue Layer"
+ depends on OF && COMMON_CLK
+ default USB_DWC3
+ help
+ Support USB2/3 functionality in simple SoC integrations.
+ Currently supports Xilinx and Qualcomm DWC USB3 IP.
+ Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_ST
+ tristate "STMicroelectronics Platforms"
+ depends on (ARCH_STI || COMPILE_TEST) && OF
+ default USB_DWC3
+ help
+ STMicroelectronics SoCs with one DesignWare Core USB3 IP
+ inside (i.e. STiH407).
+ Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_QCOM
+ tristate "Qualcomm Platform"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on OF
+ default USB_DWC3
+ help
+ Some Qualcomm SoCs use DesignWare Core IP for USB2/3
+ functionality.
+ This driver also handles Qscratch wrapper which is needed
+ for peripheral mode support.
+ Say 'Y' or 'M' if you have one such device.
+
+endif