|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | // | 
|  | // Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. | 
|  | //		http://www.samsung.com | 
|  | // | 
|  | // EXYNOS - Power Management support | 
|  | // | 
|  | // Based on arch/arm/mach-s3c2410/pm.c | 
|  | // Copyright (c) 2006 Simtec Electronics | 
|  | //	Ben Dooks <ben@simtec.co.uk> | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/suspend.h> | 
|  | #include <linux/cpu_pm.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/soc/samsung/exynos-regs-pmu.h> | 
|  | #include <linux/soc/samsung/exynos-pmu.h> | 
|  |  | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/smp_scu.h> | 
|  | #include <asm/suspend.h> | 
|  | #include <asm/cacheflush.h> | 
|  |  | 
|  | #include "common.h" | 
|  |  | 
|  | static inline void __iomem *exynos_boot_vector_addr(void) | 
|  | { | 
|  | if (samsung_rev() == EXYNOS4210_REV_1_1) | 
|  | return pmu_base_addr + S5P_INFORM7; | 
|  | else if (samsung_rev() == EXYNOS4210_REV_1_0) | 
|  | return sysram_base_addr + 0x24; | 
|  | return pmu_base_addr + S5P_INFORM0; | 
|  | } | 
|  |  | 
|  | static inline void __iomem *exynos_boot_vector_flag(void) | 
|  | { | 
|  | if (samsung_rev() == EXYNOS4210_REV_1_1) | 
|  | return pmu_base_addr + S5P_INFORM6; | 
|  | else if (samsung_rev() == EXYNOS4210_REV_1_0) | 
|  | return sysram_base_addr + 0x20; | 
|  | return pmu_base_addr + S5P_INFORM1; | 
|  | } | 
|  |  | 
|  | #define S5P_CHECK_AFTR  0xFCBA0D10 | 
|  |  | 
|  | /* For Cortex-A9 Diagnostic and Power control register */ | 
|  | static unsigned int save_arm_register[2]; | 
|  |  | 
|  | void exynos_cpu_save_register(void) | 
|  | { | 
|  | unsigned long tmp; | 
|  |  | 
|  | /* Save Power control register */ | 
|  | asm ("mrc p15, 0, %0, c15, c0, 0" | 
|  | : "=r" (tmp) : : "cc"); | 
|  |  | 
|  | save_arm_register[0] = tmp; | 
|  |  | 
|  | /* Save Diagnostic register */ | 
|  | asm ("mrc p15, 0, %0, c15, c0, 1" | 
|  | : "=r" (tmp) : : "cc"); | 
|  |  | 
|  | save_arm_register[1] = tmp; | 
|  | } | 
|  |  | 
|  | void exynos_cpu_restore_register(void) | 
|  | { | 
|  | unsigned long tmp; | 
|  |  | 
|  | /* Restore Power control register */ | 
|  | tmp = save_arm_register[0]; | 
|  |  | 
|  | asm volatile ("mcr p15, 0, %0, c15, c0, 0" | 
|  | : : "r" (tmp) | 
|  | : "cc"); | 
|  |  | 
|  | /* Restore Diagnostic register */ | 
|  | tmp = save_arm_register[1]; | 
|  |  | 
|  | asm volatile ("mcr p15, 0, %0, c15, c0, 1" | 
|  | : : "r" (tmp) | 
|  | : "cc"); | 
|  | } | 
|  |  | 
|  | void exynos_pm_central_suspend(void) | 
|  | { | 
|  | unsigned long tmp; | 
|  |  | 
|  | /* Setting Central Sequence Register for power down mode */ | 
|  | tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); | 
|  | tmp &= ~S5P_CENTRAL_LOWPWR_CFG; | 
|  | pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); | 
|  | } | 
|  |  | 
|  | int exynos_pm_central_resume(void) | 
|  | { | 
|  | unsigned long tmp; | 
|  |  | 
|  | /* | 
|  | * If PMU failed while entering sleep mode, WFI will be | 
|  | * ignored by PMU and then exiting cpu_do_idle(). | 
|  | * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically | 
|  | * in this situation. | 
|  | */ | 
|  | tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); | 
|  | if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { | 
|  | tmp |= S5P_CENTRAL_LOWPWR_CFG; | 
|  | pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); | 
|  | /* clear the wakeup state register */ | 
|  | pmu_raw_writel(0x0, S5P_WAKEUP_STAT); | 
|  | /* No need to perform below restore code */ | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ | 
|  | static void exynos_set_wakeupmask(long mask) | 
|  | { | 
|  | pmu_raw_writel(mask, S5P_WAKEUP_MASK); | 
|  | if (soc_is_exynos3250()) | 
|  | pmu_raw_writel(0x0, S5P_WAKEUP_MASK2); | 
|  | } | 
|  |  | 
|  | static void exynos_cpu_set_boot_vector(long flags) | 
|  | { | 
|  | writel_relaxed(__pa_symbol(exynos_cpu_resume), | 
|  | exynos_boot_vector_addr()); | 
|  | writel_relaxed(flags, exynos_boot_vector_flag()); | 
|  | } | 
|  |  | 
|  | static int exynos_aftr_finisher(unsigned long flags) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e); | 
|  | /* Set value of power down register for aftr mode */ | 
|  | exynos_sys_powerdown_conf(SYS_AFTR); | 
|  |  | 
|  | ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR); | 
|  | if (ret == -ENOSYS) { | 
|  | if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) | 
|  | exynos_cpu_save_register(); | 
|  | exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); | 
|  | cpu_do_idle(); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void exynos_enter_aftr(void) | 
|  | { | 
|  | unsigned int cpuid = smp_processor_id(); | 
|  |  | 
|  | cpu_pm_enter(); | 
|  |  | 
|  | if (soc_is_exynos3250()) | 
|  | exynos_set_boot_flag(cpuid, C2_STATE); | 
|  |  | 
|  | exynos_pm_central_suspend(); | 
|  |  | 
|  | if (soc_is_exynos4412()) { | 
|  | /* Setting SEQ_OPTION register */ | 
|  | pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, | 
|  | S5P_CENTRAL_SEQ_OPTION); | 
|  | } | 
|  |  | 
|  | cpu_suspend(0, exynos_aftr_finisher); | 
|  |  | 
|  | if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { | 
|  | exynos_scu_enable(); | 
|  | if (call_firmware_op(resume) == -ENOSYS) | 
|  | exynos_cpu_restore_register(); | 
|  | } | 
|  |  | 
|  | exynos_pm_central_resume(); | 
|  |  | 
|  | if (soc_is_exynos3250()) | 
|  | exynos_clear_boot_flag(cpuid, C2_STATE); | 
|  |  | 
|  | cpu_pm_exit(); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) | 
|  | static atomic_t cpu1_wakeup = ATOMIC_INIT(0); | 
|  |  | 
|  | static int exynos_cpu0_enter_aftr(void) | 
|  | { | 
|  | int ret = -1; | 
|  |  | 
|  | /* | 
|  | * If the other cpu is powered on, we have to power it off, because | 
|  | * the AFTR state won't work otherwise | 
|  | */ | 
|  | if (cpu_online(1)) { | 
|  | /* | 
|  | * We reach a sync point with the coupled idle state, we know | 
|  | * the other cpu will power down itself or will abort the | 
|  | * sequence, let's wait for one of these to happen | 
|  | */ | 
|  | while (exynos_cpu_power_state(1)) { | 
|  | unsigned long boot_addr; | 
|  |  | 
|  | /* | 
|  | * The other cpu may skip idle and boot back | 
|  | * up again | 
|  | */ | 
|  | if (atomic_read(&cpu1_wakeup)) | 
|  | goto abort; | 
|  |  | 
|  | /* | 
|  | * The other cpu may bounce through idle and | 
|  | * boot back up again, getting stuck in the | 
|  | * boot rom code | 
|  | */ | 
|  | ret = exynos_get_boot_addr(1, &boot_addr); | 
|  | if (ret) | 
|  | goto fail; | 
|  | ret = -1; | 
|  | if (boot_addr == 0) | 
|  | goto abort; | 
|  |  | 
|  | cpu_relax(); | 
|  | } | 
|  | } | 
|  |  | 
|  | exynos_enter_aftr(); | 
|  | ret = 0; | 
|  |  | 
|  | abort: | 
|  | if (cpu_online(1)) { | 
|  | unsigned long boot_addr = __pa_symbol(exynos_cpu_resume); | 
|  |  | 
|  | /* | 
|  | * Set the boot vector to something non-zero | 
|  | */ | 
|  | ret = exynos_set_boot_addr(1, boot_addr); | 
|  | if (ret) | 
|  | goto fail; | 
|  | dsb(); | 
|  |  | 
|  | /* | 
|  | * Turn on cpu1 and wait for it to be on | 
|  | */ | 
|  | exynos_cpu_power_up(1); | 
|  | while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN) | 
|  | cpu_relax(); | 
|  |  | 
|  | if (soc_is_exynos3250()) { | 
|  | while (!pmu_raw_readl(S5P_PMU_SPARE2) && | 
|  | !atomic_read(&cpu1_wakeup)) | 
|  | cpu_relax(); | 
|  |  | 
|  | if (!atomic_read(&cpu1_wakeup)) | 
|  | exynos_core_restart(1); | 
|  | } | 
|  |  | 
|  | while (!atomic_read(&cpu1_wakeup)) { | 
|  | smp_rmb(); | 
|  |  | 
|  | /* | 
|  | * Poke cpu1 out of the boot rom | 
|  | */ | 
|  |  | 
|  | ret = exynos_set_boot_addr(1, boot_addr); | 
|  | if (ret) | 
|  | goto fail; | 
|  |  | 
|  | call_firmware_op(cpu_boot, 1); | 
|  | dsb_sev(); | 
|  | } | 
|  | } | 
|  | fail: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int exynos_wfi_finisher(unsigned long flags) | 
|  | { | 
|  | if (soc_is_exynos3250()) | 
|  | flush_cache_all(); | 
|  | cpu_do_idle(); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int exynos_cpu1_powerdown(void) | 
|  | { | 
|  | int ret = -1; | 
|  |  | 
|  | /* | 
|  | * Idle sequence for cpu1 | 
|  | */ | 
|  | if (cpu_pm_enter()) | 
|  | goto cpu1_aborted; | 
|  |  | 
|  | /* | 
|  | * Turn off cpu 1 | 
|  | */ | 
|  | exynos_cpu_power_down(1); | 
|  |  | 
|  | if (soc_is_exynos3250()) | 
|  | pmu_raw_writel(0, S5P_PMU_SPARE2); | 
|  |  | 
|  | ret = cpu_suspend(0, exynos_wfi_finisher); | 
|  |  | 
|  | cpu_pm_exit(); | 
|  |  | 
|  | cpu1_aborted: | 
|  | dsb(); | 
|  | /* | 
|  | * Notify cpu 0 that cpu 1 is awake | 
|  | */ | 
|  | atomic_set(&cpu1_wakeup, 1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void exynos_pre_enter_aftr(void) | 
|  | { | 
|  | unsigned long boot_addr = __pa_symbol(exynos_cpu_resume); | 
|  |  | 
|  | (void)exynos_set_boot_addr(1, boot_addr); | 
|  | } | 
|  |  | 
|  | static void exynos_post_enter_aftr(void) | 
|  | { | 
|  | atomic_set(&cpu1_wakeup, 0); | 
|  | } | 
|  |  | 
|  | struct cpuidle_exynos_data cpuidle_coupled_exynos_data = { | 
|  | .cpu0_enter_aftr		= exynos_cpu0_enter_aftr, | 
|  | .cpu1_powerdown		= exynos_cpu1_powerdown, | 
|  | .pre_enter_aftr		= exynos_pre_enter_aftr, | 
|  | .post_enter_aftr		= exynos_post_enter_aftr, | 
|  | }; | 
|  | #endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */ |