| /* |
| * Common code for Palm LD, T5, TX, Z72 |
| * |
| * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/input.h> |
| #include <linux/pda_power.h> |
| #include <linux/pwm.h> |
| #include <linux/pwm_backlight.h> |
| #include <linux/gpio.h> |
| #include <linux/wm97xx.h> |
| #include <linux/power_supply.h> |
| #include <linux/usb/gpio_vbus.h> |
| #include <linux/regulator/max1586.h> |
| #include <linux/platform_data/i2c-pxa.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include "pxa27x.h" |
| #include <mach/audio.h> |
| #include <linux/platform_data/mmc-pxamci.h> |
| #include <linux/platform_data/video-pxafb.h> |
| #include <linux/platform_data/irda-pxaficp.h> |
| #include "udc.h" |
| #include <linux/platform_data/asoc-palm27x.h> |
| #include "palm27x.h" |
| |
| #include "generic.h" |
| #include "devices.h" |
| |
| /****************************************************************************** |
| * SD/MMC card controller |
| ******************************************************************************/ |
| #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| static struct pxamci_platform_data palm27x_mci_platform_data = { |
| .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .detect_delay_ms = 200, |
| }; |
| |
| void __init palm27x_mmc_init(int detect, int ro, int power, |
| int power_inverted) |
| { |
| palm27x_mci_platform_data.gpio_card_detect = detect; |
| palm27x_mci_platform_data.gpio_card_ro = ro; |
| palm27x_mci_platform_data.gpio_power = power; |
| palm27x_mci_platform_data.gpio_power_invert = power_inverted; |
| |
| pxa_set_mci_info(&palm27x_mci_platform_data); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * Power management - standby |
| ******************************************************************************/ |
| #if defined(CONFIG_SUSPEND) |
| void __init palm27x_pm_init(unsigned long str_base) |
| { |
| static const unsigned long resume[] = { |
| 0xe3a00101, /* mov r0, #0x40000000 */ |
| 0xe380060f, /* orr r0, r0, #0x00f00000 */ |
| 0xe590f008, /* ldr pc, [r0, #0x08] */ |
| }; |
| |
| /* |
| * Copy the bootloader. |
| * NOTE: PalmZ72 uses a different wakeup method! |
| */ |
| memcpy(phys_to_virt(str_base), resume, sizeof(resume)); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * Framebuffer |
| ******************************************************************************/ |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) |
| struct pxafb_mode_info palm_320x480_lcd_mode = { |
| .pixclock = 57692, |
| .xres = 320, |
| .yres = 480, |
| .bpp = 16, |
| |
| .left_margin = 32, |
| .right_margin = 1, |
| .upper_margin = 7, |
| .lower_margin = 1, |
| |
| .hsync_len = 4, |
| .vsync_len = 1, |
| }; |
| |
| struct pxafb_mode_info palm_320x320_lcd_mode = { |
| .pixclock = 115384, |
| .xres = 320, |
| .yres = 320, |
| .bpp = 16, |
| |
| .left_margin = 27, |
| .right_margin = 7, |
| .upper_margin = 7, |
| .lower_margin = 8, |
| |
| .hsync_len = 6, |
| .vsync_len = 1, |
| }; |
| |
| struct pxafb_mode_info palm_320x320_new_lcd_mode = { |
| .pixclock = 86538, |
| .xres = 320, |
| .yres = 320, |
| .bpp = 16, |
| |
| .left_margin = 20, |
| .right_margin = 8, |
| .upper_margin = 8, |
| .lower_margin = 5, |
| |
| .hsync_len = 4, |
| .vsync_len = 1, |
| }; |
| |
| static struct pxafb_mach_info palm27x_lcd_screen = { |
| .num_modes = 1, |
| .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, |
| }; |
| |
| static int palm27x_lcd_power; |
| static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info) |
| { |
| gpio_set_value(palm27x_lcd_power, on); |
| } |
| |
| void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) |
| { |
| palm27x_lcd_screen.modes = mode; |
| |
| if (gpio_is_valid(power)) { |
| if (!gpio_request(power, "LCD power")) { |
| pr_err("Palm27x: failed to claim lcd power gpio!\n"); |
| return; |
| } |
| if (!gpio_direction_output(power, 1)) { |
| pr_err("Palm27x: lcd power configuration failed!\n"); |
| return; |
| } |
| palm27x_lcd_power = power; |
| palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; |
| } |
| |
| pxa_set_fb_info(NULL, &palm27x_lcd_screen); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * USB Gadget |
| ******************************************************************************/ |
| #if defined(CONFIG_USB_PXA27X) || \ |
| defined(CONFIG_USB_PXA27X_MODULE) |
| static struct gpio_vbus_mach_info palm27x_udc_info = { |
| .gpio_vbus_inverted = 1, |
| }; |
| |
| static struct platform_device palm27x_gpio_vbus = { |
| .name = "gpio-vbus", |
| .id = -1, |
| .dev = { |
| .platform_data = &palm27x_udc_info, |
| }, |
| }; |
| |
| void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted) |
| { |
| palm27x_udc_info.gpio_vbus = vbus; |
| palm27x_udc_info.gpio_pullup = pullup; |
| |
| palm27x_udc_info.gpio_vbus_inverted = vbus_inverted; |
| |
| if (!gpio_request(pullup, "USB Pullup")) { |
| gpio_direction_output(pullup, |
| palm27x_udc_info.gpio_vbus_inverted); |
| gpio_free(pullup); |
| } else |
| return; |
| |
| platform_device_register(&palm27x_gpio_vbus); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * IrDA |
| ******************************************************************************/ |
| #if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) |
| static struct pxaficp_platform_data palm27x_ficp_platform_data = { |
| .transceiver_cap = IR_SIRMODE | IR_OFF, |
| }; |
| |
| void __init palm27x_irda_init(int pwdn) |
| { |
| palm27x_ficp_platform_data.gpio_pwdown = pwdn; |
| pxa_set_ficp_info(&palm27x_ficp_platform_data); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * WM97xx audio, battery |
| ******************************************************************************/ |
| #if defined(CONFIG_TOUCHSCREEN_WM97XX) || \ |
| defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE) |
| static struct wm97xx_batt_pdata palm27x_batt_pdata = { |
| .batt_aux = WM97XX_AUX_ID3, |
| .temp_aux = WM97XX_AUX_ID2, |
| .charge_gpio = -1, |
| .batt_mult = 1000, |
| .batt_div = 414, |
| .temp_mult = 1, |
| .temp_div = 1, |
| .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, |
| .batt_name = "main-batt", |
| }; |
| |
| static struct wm97xx_pdata palm27x_wm97xx_pdata = { |
| .batt_pdata = &palm27x_batt_pdata, |
| }; |
| |
| static pxa2xx_audio_ops_t palm27x_ac97_pdata = { |
| .codec_pdata = { &palm27x_wm97xx_pdata, }, |
| }; |
| |
| static struct palm27x_asoc_info palm27x_asoc_pdata = { |
| .jack_gpio = -1, |
| }; |
| |
| static struct platform_device palm27x_asoc = { |
| .name = "palm27x-asoc", |
| .id = -1, |
| .dev = { |
| .platform_data = &palm27x_asoc_pdata, |
| }, |
| }; |
| |
| void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset) |
| { |
| palm27x_ac97_pdata.reset_gpio = reset; |
| palm27x_asoc_pdata.jack_gpio = jack; |
| |
| if (minv < 0 || maxv < 0) { |
| palm27x_ac97_pdata.codec_pdata[0] = NULL; |
| pxa_set_ac97_info(&palm27x_ac97_pdata); |
| } else { |
| palm27x_batt_pdata.min_voltage = minv, |
| palm27x_batt_pdata.max_voltage = maxv, |
| |
| pxa_set_ac97_info(&palm27x_ac97_pdata); |
| platform_device_register(&palm27x_asoc); |
| } |
| } |
| #endif |
| |
| /****************************************************************************** |
| * Backlight |
| ******************************************************************************/ |
| #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) |
| static struct pwm_lookup palm27x_pwm_lookup[] = { |
| PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024, |
| PWM_POLARITY_NORMAL), |
| }; |
| |
| static int palm_bl_power; |
| static int palm_lcd_power; |
| |
| static int palm27x_backlight_init(struct device *dev) |
| { |
| int ret; |
| |
| ret = gpio_request(palm_bl_power, "BL POWER"); |
| if (ret) |
| goto err; |
| ret = gpio_direction_output(palm_bl_power, 0); |
| if (ret) |
| goto err2; |
| |
| if (gpio_is_valid(palm_lcd_power)) { |
| ret = gpio_request(palm_lcd_power, "LCD POWER"); |
| if (ret) |
| goto err2; |
| ret = gpio_direction_output(palm_lcd_power, 0); |
| if (ret) |
| goto err3; |
| } |
| |
| return 0; |
| err3: |
| gpio_free(palm_lcd_power); |
| err2: |
| gpio_free(palm_bl_power); |
| err: |
| return ret; |
| } |
| |
| static int palm27x_backlight_notify(struct device *dev, int brightness) |
| { |
| gpio_set_value(palm_bl_power, brightness); |
| if (gpio_is_valid(palm_lcd_power)) |
| gpio_set_value(palm_lcd_power, brightness); |
| return brightness; |
| } |
| |
| static void palm27x_backlight_exit(struct device *dev) |
| { |
| gpio_free(palm_bl_power); |
| if (gpio_is_valid(palm_lcd_power)) |
| gpio_free(palm_lcd_power); |
| } |
| |
| static struct platform_pwm_backlight_data palm27x_backlight_data = { |
| .max_brightness = 0xfe, |
| .dft_brightness = 0x7e, |
| .enable_gpio = -1, |
| .init = palm27x_backlight_init, |
| .notify = palm27x_backlight_notify, |
| .exit = palm27x_backlight_exit, |
| }; |
| |
| static struct platform_device palm27x_backlight = { |
| .name = "pwm-backlight", |
| .dev = { |
| .parent = &pxa27x_device_pwm0.dev, |
| .platform_data = &palm27x_backlight_data, |
| }, |
| }; |
| |
| void __init palm27x_pwm_init(int bl, int lcd) |
| { |
| palm_bl_power = bl; |
| palm_lcd_power = lcd; |
| pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup)); |
| platform_device_register(&palm27x_backlight); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * Power supply |
| ******************************************************************************/ |
| #if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE) |
| static int palm_ac_state; |
| static int palm_usb_state; |
| |
| static int palm27x_power_supply_init(struct device *dev) |
| { |
| int ret; |
| |
| ret = gpio_request(palm_ac_state, "AC state"); |
| if (ret) |
| goto err1; |
| ret = gpio_direction_input(palm_ac_state); |
| if (ret) |
| goto err2; |
| |
| if (gpio_is_valid(palm_usb_state)) { |
| ret = gpio_request(palm_usb_state, "USB state"); |
| if (ret) |
| goto err2; |
| ret = gpio_direction_input(palm_usb_state); |
| if (ret) |
| goto err3; |
| } |
| |
| return 0; |
| err3: |
| gpio_free(palm_usb_state); |
| err2: |
| gpio_free(palm_ac_state); |
| err1: |
| return ret; |
| } |
| |
| static void palm27x_power_supply_exit(struct device *dev) |
| { |
| gpio_free(palm_usb_state); |
| gpio_free(palm_ac_state); |
| } |
| |
| static int palm27x_is_ac_online(void) |
| { |
| return gpio_get_value(palm_ac_state); |
| } |
| |
| static int palm27x_is_usb_online(void) |
| { |
| return !gpio_get_value(palm_usb_state); |
| } |
| static char *palm27x_supplicants[] = { |
| "main-battery", |
| }; |
| |
| static struct pda_power_pdata palm27x_ps_info = { |
| .init = palm27x_power_supply_init, |
| .exit = palm27x_power_supply_exit, |
| .is_ac_online = palm27x_is_ac_online, |
| .is_usb_online = palm27x_is_usb_online, |
| .supplied_to = palm27x_supplicants, |
| .num_supplicants = ARRAY_SIZE(palm27x_supplicants), |
| }; |
| |
| static struct platform_device palm27x_power_supply = { |
| .name = "pda-power", |
| .id = -1, |
| .dev = { |
| .platform_data = &palm27x_ps_info, |
| }, |
| }; |
| |
| void __init palm27x_power_init(int ac, int usb) |
| { |
| palm_ac_state = ac; |
| palm_usb_state = usb; |
| platform_device_register(&palm27x_power_supply); |
| } |
| #endif |
| |
| /****************************************************************************** |
| * Core power regulator |
| ******************************************************************************/ |
| #if defined(CONFIG_REGULATOR_MAX1586) || \ |
| defined(CONFIG_REGULATOR_MAX1586_MODULE) |
| static struct regulator_consumer_supply palm27x_max1587a_consumers[] = { |
| REGULATOR_SUPPLY("vcc_core", NULL), |
| }; |
| |
| static struct regulator_init_data palm27x_max1587a_v3_info = { |
| .constraints = { |
| .name = "vcc_core range", |
| .min_uV = 900000, |
| .max_uV = 1705000, |
| .always_on = 1, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, |
| }, |
| .consumer_supplies = palm27x_max1587a_consumers, |
| .num_consumer_supplies = ARRAY_SIZE(palm27x_max1587a_consumers), |
| }; |
| |
| static struct max1586_subdev_data palm27x_max1587a_subdevs[] = { |
| { |
| .name = "vcc_core", |
| .id = MAX1586_V3, |
| .platform_data = &palm27x_max1587a_v3_info, |
| } |
| }; |
| |
| static struct max1586_platform_data palm27x_max1587a_info = { |
| .subdevs = palm27x_max1587a_subdevs, |
| .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs), |
| .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ |
| }; |
| |
| static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = { |
| { |
| I2C_BOARD_INFO("max1586", 0x14), |
| .platform_data = &palm27x_max1587a_info, |
| }, |
| }; |
| |
| static struct i2c_pxa_platform_data palm27x_i2c_power_info = { |
| .use_pio = 1, |
| }; |
| |
| void __init palm27x_pmic_init(void) |
| { |
| i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info)); |
| pxa27x_set_i2c_power_info(&palm27x_i2c_power_info); |
| } |
| #endif |