|  | /* | 
|  | * wm8510.c  --  WM8510 ALSA Soc Audio driver | 
|  | * | 
|  | * Copyright 2006 Wolfson Microelectronics PLC. | 
|  | * | 
|  | * Author: Liam Girdwood <lrg@slimlogic.co.uk> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/initval.h> | 
|  |  | 
|  | #include "wm8510.h" | 
|  |  | 
|  | /* | 
|  | * wm8510 register cache | 
|  | * We can't read the WM8510 register space when we are | 
|  | * using 2 wire for device control, so we cache them instead. | 
|  | */ | 
|  | static const struct reg_default wm8510_reg_defaults[] = { | 
|  | {  1, 0x0000 }, | 
|  | {  2, 0x0000 }, | 
|  | {  3, 0x0000 }, | 
|  | {  4, 0x0050 }, | 
|  | {  5, 0x0000 }, | 
|  | {  6, 0x0140 }, | 
|  | {  7, 0x0000 }, | 
|  | {  8, 0x0000 }, | 
|  | {  9, 0x0000 }, | 
|  | { 10, 0x0000 }, | 
|  | { 11, 0x00ff }, | 
|  | { 12, 0x0000 }, | 
|  | { 13, 0x0000 }, | 
|  | { 14, 0x0100 }, | 
|  | { 15, 0x00ff }, | 
|  | { 16, 0x0000 }, | 
|  | { 17, 0x0000 }, | 
|  | { 18, 0x012c }, | 
|  | { 19, 0x002c }, | 
|  | { 20, 0x002c }, | 
|  | { 21, 0x002c }, | 
|  | { 22, 0x002c }, | 
|  | { 23, 0x0000 }, | 
|  | { 24, 0x0032 }, | 
|  | { 25, 0x0000 }, | 
|  | { 26, 0x0000 }, | 
|  | { 27, 0x0000 }, | 
|  | { 28, 0x0000 }, | 
|  | { 29, 0x0000 }, | 
|  | { 30, 0x0000 }, | 
|  | { 31, 0x0000 }, | 
|  | { 32, 0x0038 }, | 
|  | { 33, 0x000b }, | 
|  | { 34, 0x0032 }, | 
|  | { 35, 0x0000 }, | 
|  | { 36, 0x0008 }, | 
|  | { 37, 0x000c }, | 
|  | { 38, 0x0093 }, | 
|  | { 39, 0x00e9 }, | 
|  | { 40, 0x0000 }, | 
|  | { 41, 0x0000 }, | 
|  | { 42, 0x0000 }, | 
|  | { 43, 0x0000 }, | 
|  | { 44, 0x0003 }, | 
|  | { 45, 0x0010 }, | 
|  | { 46, 0x0000 }, | 
|  | { 47, 0x0000 }, | 
|  | { 48, 0x0000 }, | 
|  | { 49, 0x0002 }, | 
|  | { 50, 0x0001 }, | 
|  | { 51, 0x0000 }, | 
|  | { 52, 0x0000 }, | 
|  | { 53, 0x0000 }, | 
|  | { 54, 0x0039 }, | 
|  | { 55, 0x0000 }, | 
|  | { 56, 0x0001 }, | 
|  | }; | 
|  |  | 
|  | static bool wm8510_volatile(struct device *dev, unsigned int reg) | 
|  | { | 
|  | switch (reg) { | 
|  | case WM8510_RESET: | 
|  | return true; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define WM8510_POWER1_BIASEN  0x08 | 
|  | #define WM8510_POWER1_BUFIOEN 0x10 | 
|  |  | 
|  | #define wm8510_reset(c)	snd_soc_component_write(c, WM8510_RESET, 0) | 
|  |  | 
|  | /* codec private data */ | 
|  | struct wm8510_priv { | 
|  | struct regmap *regmap; | 
|  | }; | 
|  |  | 
|  | static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" }; | 
|  | static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" }; | 
|  | static const char *wm8510_alc[] = { "ALC", "Limiter" }; | 
|  |  | 
|  | static const struct soc_enum wm8510_enum[] = { | 
|  | SOC_ENUM_SINGLE(WM8510_COMP, 1, 4, wm8510_companding), /* adc */ | 
|  | SOC_ENUM_SINGLE(WM8510_COMP, 3, 4, wm8510_companding), /* dac */ | 
|  | SOC_ENUM_SINGLE(WM8510_DAC,  4, 4, wm8510_deemp), | 
|  | SOC_ENUM_SINGLE(WM8510_ALC3,  8, 2, wm8510_alc), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8510_snd_controls[] = { | 
|  |  | 
|  | SOC_SINGLE("Digital Loopback Switch", WM8510_COMP, 0, 1, 0), | 
|  |  | 
|  | SOC_ENUM("DAC Companding", wm8510_enum[1]), | 
|  | SOC_ENUM("ADC Companding", wm8510_enum[0]), | 
|  |  | 
|  | SOC_ENUM("Playback De-emphasis", wm8510_enum[2]), | 
|  | SOC_SINGLE("DAC Inversion Switch", WM8510_DAC, 0, 1, 0), | 
|  |  | 
|  | SOC_SINGLE("Master Playback Volume", WM8510_DACVOL, 0, 127, 0), | 
|  |  | 
|  | SOC_SINGLE("High Pass Filter Switch", WM8510_ADC, 8, 1, 0), | 
|  | SOC_SINGLE("High Pass Cut Off", WM8510_ADC, 4, 7, 0), | 
|  | SOC_SINGLE("ADC Inversion Switch", WM8510_COMP, 0, 1, 0), | 
|  |  | 
|  | SOC_SINGLE("Capture Volume", WM8510_ADCVOL,  0, 127, 0), | 
|  |  | 
|  | SOC_SINGLE("DAC Playback Limiter Switch", WM8510_DACLIM1,  8, 1, 0), | 
|  | SOC_SINGLE("DAC Playback Limiter Decay", WM8510_DACLIM1,  4, 15, 0), | 
|  | SOC_SINGLE("DAC Playback Limiter Attack", WM8510_DACLIM1,  0, 15, 0), | 
|  |  | 
|  | SOC_SINGLE("DAC Playback Limiter Threshold", WM8510_DACLIM2,  4, 7, 0), | 
|  | SOC_SINGLE("DAC Playback Limiter Boost", WM8510_DACLIM2,  0, 15, 0), | 
|  |  | 
|  | SOC_SINGLE("ALC Enable Switch", WM8510_ALC1,  8, 1, 0), | 
|  | SOC_SINGLE("ALC Capture Max Gain", WM8510_ALC1,  3, 7, 0), | 
|  | SOC_SINGLE("ALC Capture Min Gain", WM8510_ALC1,  0, 7, 0), | 
|  |  | 
|  | SOC_SINGLE("ALC Capture ZC Switch", WM8510_ALC2,  8, 1, 0), | 
|  | SOC_SINGLE("ALC Capture Hold", WM8510_ALC2,  4, 7, 0), | 
|  | SOC_SINGLE("ALC Capture Target", WM8510_ALC2,  0, 15, 0), | 
|  |  | 
|  | SOC_ENUM("ALC Capture Mode", wm8510_enum[3]), | 
|  | SOC_SINGLE("ALC Capture Decay", WM8510_ALC3,  4, 15, 0), | 
|  | SOC_SINGLE("ALC Capture Attack", WM8510_ALC3,  0, 15, 0), | 
|  |  | 
|  | SOC_SINGLE("ALC Capture Noise Gate Switch", WM8510_NGATE,  3, 1, 0), | 
|  | SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8510_NGATE,  0, 7, 0), | 
|  |  | 
|  | SOC_SINGLE("Capture PGA ZC Switch", WM8510_INPPGA,  7, 1, 0), | 
|  | SOC_SINGLE("Capture PGA Volume", WM8510_INPPGA,  0, 63, 0), | 
|  |  | 
|  | SOC_SINGLE("Speaker Playback ZC Switch", WM8510_SPKVOL,  7, 1, 0), | 
|  | SOC_SINGLE("Speaker Playback Switch", WM8510_SPKVOL,  6, 1, 1), | 
|  | SOC_SINGLE("Speaker Playback Volume", WM8510_SPKVOL,  0, 63, 0), | 
|  | SOC_SINGLE("Speaker Boost", WM8510_OUTPUT, 2, 1, 0), | 
|  |  | 
|  | SOC_SINGLE("Capture Boost(+20dB)", WM8510_ADCBOOST,  8, 1, 0), | 
|  | SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1), | 
|  | }; | 
|  |  | 
|  | /* Speaker Output Mixer */ | 
|  | static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = { | 
|  | SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0), | 
|  | SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_SPKMIX, 5, 1, 0), | 
|  | SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_SPKMIX, 0, 1, 0), | 
|  | }; | 
|  |  | 
|  | /* Mono Output Mixer */ | 
|  | static const struct snd_kcontrol_new wm8510_mono_mixer_controls[] = { | 
|  | SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_MONOMIX, 1, 1, 0), | 
|  | SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_MONOMIX, 2, 1, 0), | 
|  | SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8510_boost_controls[] = { | 
|  | SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA,  6, 1, 1), | 
|  | SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0), | 
|  | SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8510_micpga_controls[] = { | 
|  | SOC_DAPM_SINGLE("MICP Switch", WM8510_INPUT, 0, 1, 0), | 
|  | SOC_DAPM_SINGLE("MICN Switch", WM8510_INPUT, 1, 1, 0), | 
|  | SOC_DAPM_SINGLE("AUX Switch", WM8510_INPUT, 2, 1, 0), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_widget wm8510_dapm_widgets[] = { | 
|  | SND_SOC_DAPM_MIXER("Speaker Mixer", WM8510_POWER3, 2, 0, | 
|  | &wm8510_speaker_mixer_controls[0], | 
|  | ARRAY_SIZE(wm8510_speaker_mixer_controls)), | 
|  | SND_SOC_DAPM_MIXER("Mono Mixer", WM8510_POWER3, 3, 0, | 
|  | &wm8510_mono_mixer_controls[0], | 
|  | ARRAY_SIZE(wm8510_mono_mixer_controls)), | 
|  | SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8510_POWER3, 0, 0), | 
|  | SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8510_POWER2, 0, 0), | 
|  | SND_SOC_DAPM_PGA("Aux Input", WM8510_POWER1, 6, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("SpkN Out", WM8510_POWER3, 5, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("SpkP Out", WM8510_POWER3, 6, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("Mono Out", WM8510_POWER3, 7, 0, NULL, 0), | 
|  |  | 
|  | SND_SOC_DAPM_MIXER("Mic PGA", WM8510_POWER2, 2, 0, | 
|  | &wm8510_micpga_controls[0], | 
|  | ARRAY_SIZE(wm8510_micpga_controls)), | 
|  | SND_SOC_DAPM_MIXER("Boost Mixer", WM8510_POWER2, 4, 0, | 
|  | &wm8510_boost_controls[0], | 
|  | ARRAY_SIZE(wm8510_boost_controls)), | 
|  |  | 
|  | SND_SOC_DAPM_MICBIAS("Mic Bias", WM8510_POWER1, 4, 0), | 
|  |  | 
|  | SND_SOC_DAPM_INPUT("MICN"), | 
|  | SND_SOC_DAPM_INPUT("MICP"), | 
|  | SND_SOC_DAPM_INPUT("AUX"), | 
|  | SND_SOC_DAPM_OUTPUT("MONOOUT"), | 
|  | SND_SOC_DAPM_OUTPUT("SPKOUTP"), | 
|  | SND_SOC_DAPM_OUTPUT("SPKOUTN"), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route wm8510_dapm_routes[] = { | 
|  | /* Mono output mixer */ | 
|  | {"Mono Mixer", "PCM Playback Switch", "DAC"}, | 
|  | {"Mono Mixer", "Aux Playback Switch", "Aux Input"}, | 
|  | {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"}, | 
|  |  | 
|  | /* Speaker output mixer */ | 
|  | {"Speaker Mixer", "PCM Playback Switch", "DAC"}, | 
|  | {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, | 
|  | {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, | 
|  |  | 
|  | /* Outputs */ | 
|  | {"Mono Out", NULL, "Mono Mixer"}, | 
|  | {"MONOOUT", NULL, "Mono Out"}, | 
|  | {"SpkN Out", NULL, "Speaker Mixer"}, | 
|  | {"SpkP Out", NULL, "Speaker Mixer"}, | 
|  | {"SPKOUTN", NULL, "SpkN Out"}, | 
|  | {"SPKOUTP", NULL, "SpkP Out"}, | 
|  |  | 
|  | /* Microphone PGA */ | 
|  | {"Mic PGA", "MICN Switch", "MICN"}, | 
|  | {"Mic PGA", "MICP Switch", "MICP"}, | 
|  | { "Mic PGA", "AUX Switch", "Aux Input" }, | 
|  |  | 
|  | /* Boost Mixer */ | 
|  | {"Boost Mixer", "Mic PGA Switch", "Mic PGA"}, | 
|  | {"Boost Mixer", "Mic Volume", "MICP"}, | 
|  | {"Boost Mixer", "Aux Volume", "Aux Input"}, | 
|  |  | 
|  | {"ADC", NULL, "Boost Mixer"}, | 
|  | }; | 
|  |  | 
|  | struct pll_ { | 
|  | unsigned int pre_div:4; /* prescale - 1 */ | 
|  | unsigned int n:4; | 
|  | unsigned int k; | 
|  | }; | 
|  |  | 
|  | static struct pll_ pll_div; | 
|  |  | 
|  | /* The size in bits of the pll divide multiplied by 10 | 
|  | * to allow rounding later */ | 
|  | #define FIXED_PLL_SIZE ((1 << 24) * 10) | 
|  |  | 
|  | static void pll_factors(unsigned int target, unsigned int source) | 
|  | { | 
|  | unsigned long long Kpart; | 
|  | unsigned int K, Ndiv, Nmod; | 
|  |  | 
|  | Ndiv = target / source; | 
|  | if (Ndiv < 6) { | 
|  | source >>= 1; | 
|  | pll_div.pre_div = 1; | 
|  | Ndiv = target / source; | 
|  | } else | 
|  | pll_div.pre_div = 0; | 
|  |  | 
|  | if ((Ndiv < 6) || (Ndiv > 12)) | 
|  | printk(KERN_WARNING | 
|  | "WM8510 N value %u outwith recommended range!d\n", | 
|  | Ndiv); | 
|  |  | 
|  | pll_div.n = Ndiv; | 
|  | Nmod = target % source; | 
|  | Kpart = FIXED_PLL_SIZE * (long long)Nmod; | 
|  |  | 
|  | do_div(Kpart, source); | 
|  |  | 
|  | K = Kpart & 0xFFFFFFFF; | 
|  |  | 
|  | /* Check if we need to round */ | 
|  | if ((K % 10) >= 5) | 
|  | K += 5; | 
|  |  | 
|  | /* Move down to proper range now rounding is done */ | 
|  | K /= 10; | 
|  |  | 
|  | pll_div.k = K; | 
|  | } | 
|  |  | 
|  | static int wm8510_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, | 
|  | int source, unsigned int freq_in, unsigned int freq_out) | 
|  | { | 
|  | struct snd_soc_component *component = codec_dai->component; | 
|  | u16 reg; | 
|  |  | 
|  | if (freq_in == 0 || freq_out == 0) { | 
|  | /* Clock CODEC directly from MCLK */ | 
|  | reg = snd_soc_component_read32(component, WM8510_CLOCK); | 
|  | snd_soc_component_write(component, WM8510_CLOCK, reg & 0x0ff); | 
|  |  | 
|  | /* Turn off PLL */ | 
|  | reg = snd_soc_component_read32(component, WM8510_POWER1); | 
|  | snd_soc_component_write(component, WM8510_POWER1, reg & 0x1df); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | pll_factors(freq_out*4, freq_in); | 
|  |  | 
|  | snd_soc_component_write(component, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n); | 
|  | snd_soc_component_write(component, WM8510_PLLK1, pll_div.k >> 18); | 
|  | snd_soc_component_write(component, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff); | 
|  | snd_soc_component_write(component, WM8510_PLLK3, pll_div.k & 0x1ff); | 
|  | reg = snd_soc_component_read32(component, WM8510_POWER1); | 
|  | snd_soc_component_write(component, WM8510_POWER1, reg | 0x020); | 
|  |  | 
|  | /* Run CODEC from PLL instead of MCLK */ | 
|  | reg = snd_soc_component_read32(component, WM8510_CLOCK); | 
|  | snd_soc_component_write(component, WM8510_CLOCK, reg | 0x100); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configure WM8510 clock dividers. | 
|  | */ | 
|  | static int wm8510_set_dai_clkdiv(struct snd_soc_dai *codec_dai, | 
|  | int div_id, int div) | 
|  | { | 
|  | struct snd_soc_component *component = codec_dai->component; | 
|  | u16 reg; | 
|  |  | 
|  | switch (div_id) { | 
|  | case WM8510_OPCLKDIV: | 
|  | reg = snd_soc_component_read32(component, WM8510_GPIO) & 0x1cf; | 
|  | snd_soc_component_write(component, WM8510_GPIO, reg | div); | 
|  | break; | 
|  | case WM8510_MCLKDIV: | 
|  | reg = snd_soc_component_read32(component, WM8510_CLOCK) & 0x11f; | 
|  | snd_soc_component_write(component, WM8510_CLOCK, reg | div); | 
|  | break; | 
|  | case WM8510_ADCCLK: | 
|  | reg = snd_soc_component_read32(component, WM8510_ADC) & 0x1f7; | 
|  | snd_soc_component_write(component, WM8510_ADC, reg | div); | 
|  | break; | 
|  | case WM8510_DACCLK: | 
|  | reg = snd_soc_component_read32(component, WM8510_DAC) & 0x1f7; | 
|  | snd_soc_component_write(component, WM8510_DAC, reg | div); | 
|  | break; | 
|  | case WM8510_BCLKDIV: | 
|  | reg = snd_soc_component_read32(component, WM8510_CLOCK) & 0x1e3; | 
|  | snd_soc_component_write(component, WM8510_CLOCK, reg | div); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_set_dai_fmt(struct snd_soc_dai *codec_dai, | 
|  | unsigned int fmt) | 
|  | { | 
|  | struct snd_soc_component *component = codec_dai->component; | 
|  | u16 iface = 0; | 
|  | u16 clk = snd_soc_component_read32(component, WM8510_CLOCK) & 0x1fe; | 
|  |  | 
|  | /* set master/slave audio interface */ | 
|  | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
|  | case SND_SOC_DAIFMT_CBM_CFM: | 
|  | clk |= 0x0001; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_CBS_CFS: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* interface format */ | 
|  | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | iface |= 0x0010; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | iface |= 0x0008; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_DSP_A: | 
|  | iface |= 0x00018; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* clock inversion */ | 
|  | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
|  | case SND_SOC_DAIFMT_NB_NF: | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_IF: | 
|  | iface |= 0x0180; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_NF: | 
|  | iface |= 0x0100; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_NB_IF: | 
|  | iface |= 0x0080; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | snd_soc_component_write(component, WM8510_IFACE, iface); | 
|  | snd_soc_component_write(component, WM8510_CLOCK, clk); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params, | 
|  | struct snd_soc_dai *dai) | 
|  | { | 
|  | struct snd_soc_component *component = dai->component; | 
|  | u16 iface = snd_soc_component_read32(component, WM8510_IFACE) & 0x19f; | 
|  | u16 adn = snd_soc_component_read32(component, WM8510_ADD) & 0x1f1; | 
|  |  | 
|  | /* bit size */ | 
|  | switch (params_width(params)) { | 
|  | case 16: | 
|  | break; | 
|  | case 20: | 
|  | iface |= 0x0020; | 
|  | break; | 
|  | case 24: | 
|  | iface |= 0x0040; | 
|  | break; | 
|  | case 32: | 
|  | iface |= 0x0060; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* filter coefficient */ | 
|  | switch (params_rate(params)) { | 
|  | case 8000: | 
|  | adn |= 0x5 << 1; | 
|  | break; | 
|  | case 11025: | 
|  | adn |= 0x4 << 1; | 
|  | break; | 
|  | case 16000: | 
|  | adn |= 0x3 << 1; | 
|  | break; | 
|  | case 22050: | 
|  | adn |= 0x2 << 1; | 
|  | break; | 
|  | case 32000: | 
|  | adn |= 0x1 << 1; | 
|  | break; | 
|  | case 44100: | 
|  | case 48000: | 
|  | break; | 
|  | } | 
|  |  | 
|  | snd_soc_component_write(component, WM8510_IFACE, iface); | 
|  | snd_soc_component_write(component, WM8510_ADD, adn); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_mute(struct snd_soc_dai *dai, int mute) | 
|  | { | 
|  | struct snd_soc_component *component = dai->component; | 
|  | u16 mute_reg = snd_soc_component_read32(component, WM8510_DAC) & 0xffbf; | 
|  |  | 
|  | if (mute) | 
|  | snd_soc_component_write(component, WM8510_DAC, mute_reg | 0x40); | 
|  | else | 
|  | snd_soc_component_write(component, WM8510_DAC, mute_reg); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* liam need to make this lower power with dapm */ | 
|  | static int wm8510_set_bias_level(struct snd_soc_component *component, | 
|  | enum snd_soc_bias_level level) | 
|  | { | 
|  | struct wm8510_priv *wm8510 = snd_soc_component_get_drvdata(component); | 
|  | u16 power1 = snd_soc_component_read32(component, WM8510_POWER1) & ~0x3; | 
|  |  | 
|  | switch (level) { | 
|  | case SND_SOC_BIAS_ON: | 
|  | case SND_SOC_BIAS_PREPARE: | 
|  | power1 |= 0x1;  /* VMID 50k */ | 
|  | snd_soc_component_write(component, WM8510_POWER1, power1); | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_STANDBY: | 
|  | power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN; | 
|  |  | 
|  | if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { | 
|  | regcache_sync(wm8510->regmap); | 
|  |  | 
|  | /* Initial cap charge at VMID 5k */ | 
|  | snd_soc_component_write(component, WM8510_POWER1, power1 | 0x3); | 
|  | mdelay(100); | 
|  | } | 
|  |  | 
|  | power1 |= 0x2;  /* VMID 500k */ | 
|  | snd_soc_component_write(component, WM8510_POWER1, power1); | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_OFF: | 
|  | snd_soc_component_write(component, WM8510_POWER1, 0); | 
|  | snd_soc_component_write(component, WM8510_POWER2, 0); | 
|  | snd_soc_component_write(component, WM8510_POWER3, 0); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define WM8510_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ | 
|  | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ | 
|  | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) | 
|  |  | 
|  | #define WM8510_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ | 
|  | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) | 
|  |  | 
|  | static const struct snd_soc_dai_ops wm8510_dai_ops = { | 
|  | .hw_params	= wm8510_pcm_hw_params, | 
|  | .digital_mute	= wm8510_mute, | 
|  | .set_fmt	= wm8510_set_dai_fmt, | 
|  | .set_clkdiv	= wm8510_set_dai_clkdiv, | 
|  | .set_pll	= wm8510_set_dai_pll, | 
|  | }; | 
|  |  | 
|  | static struct snd_soc_dai_driver wm8510_dai = { | 
|  | .name = "wm8510-hifi", | 
|  | .playback = { | 
|  | .stream_name = "Playback", | 
|  | .channels_min = 2, | 
|  | .channels_max = 2, | 
|  | .rates = WM8510_RATES, | 
|  | .formats = WM8510_FORMATS,}, | 
|  | .capture = { | 
|  | .stream_name = "Capture", | 
|  | .channels_min = 2, | 
|  | .channels_max = 2, | 
|  | .rates = WM8510_RATES, | 
|  | .formats = WM8510_FORMATS,}, | 
|  | .ops = &wm8510_dai_ops, | 
|  | .symmetric_rates = 1, | 
|  | }; | 
|  |  | 
|  | static int wm8510_probe(struct snd_soc_component *component) | 
|  | { | 
|  | wm8510_reset(component); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_component_driver soc_component_dev_wm8510 = { | 
|  | .probe			= wm8510_probe, | 
|  | .set_bias_level		= wm8510_set_bias_level, | 
|  | .controls		= wm8510_snd_controls, | 
|  | .num_controls		= ARRAY_SIZE(wm8510_snd_controls), | 
|  | .dapm_widgets		= wm8510_dapm_widgets, | 
|  | .num_dapm_widgets	= ARRAY_SIZE(wm8510_dapm_widgets), | 
|  | .dapm_routes		= wm8510_dapm_routes, | 
|  | .num_dapm_routes	= ARRAY_SIZE(wm8510_dapm_routes), | 
|  | .suspend_bias_off	= 1, | 
|  | .idle_bias_on		= 1, | 
|  | .use_pmdown_time	= 1, | 
|  | .endianness		= 1, | 
|  | .non_legacy_dai_naming	= 1, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id wm8510_of_match[] = { | 
|  | { .compatible = "wlf,wm8510" }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, wm8510_of_match); | 
|  |  | 
|  | static const struct regmap_config wm8510_regmap = { | 
|  | .reg_bits = 7, | 
|  | .val_bits = 9, | 
|  | .max_register = WM8510_MONOMIX, | 
|  |  | 
|  | .reg_defaults = wm8510_reg_defaults, | 
|  | .num_reg_defaults = ARRAY_SIZE(wm8510_reg_defaults), | 
|  | .cache_type = REGCACHE_RBTREE, | 
|  |  | 
|  | .volatile_reg = wm8510_volatile, | 
|  | }; | 
|  |  | 
|  | #if defined(CONFIG_SPI_MASTER) | 
|  | static int wm8510_spi_probe(struct spi_device *spi) | 
|  | { | 
|  | struct wm8510_priv *wm8510; | 
|  | int ret; | 
|  |  | 
|  | wm8510 = devm_kzalloc(&spi->dev, sizeof(struct wm8510_priv), | 
|  | GFP_KERNEL); | 
|  | if (wm8510 == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | wm8510->regmap = devm_regmap_init_spi(spi, &wm8510_regmap); | 
|  | if (IS_ERR(wm8510->regmap)) | 
|  | return PTR_ERR(wm8510->regmap); | 
|  |  | 
|  | spi_set_drvdata(spi, wm8510); | 
|  |  | 
|  | ret = devm_snd_soc_register_component(&spi->dev, | 
|  | &soc_component_dev_wm8510, &wm8510_dai, 1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct spi_driver wm8510_spi_driver = { | 
|  | .driver = { | 
|  | .name	= "wm8510", | 
|  | .of_match_table = wm8510_of_match, | 
|  | }, | 
|  | .probe		= wm8510_spi_probe, | 
|  | }; | 
|  | #endif /* CONFIG_SPI_MASTER */ | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  | static int wm8510_i2c_probe(struct i2c_client *i2c, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct wm8510_priv *wm8510; | 
|  | int ret; | 
|  |  | 
|  | wm8510 = devm_kzalloc(&i2c->dev, sizeof(struct wm8510_priv), | 
|  | GFP_KERNEL); | 
|  | if (wm8510 == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | wm8510->regmap = devm_regmap_init_i2c(i2c, &wm8510_regmap); | 
|  | if (IS_ERR(wm8510->regmap)) | 
|  | return PTR_ERR(wm8510->regmap); | 
|  |  | 
|  | i2c_set_clientdata(i2c, wm8510); | 
|  |  | 
|  | ret = devm_snd_soc_register_component(&i2c->dev, | 
|  | &soc_component_dev_wm8510, &wm8510_dai, 1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id wm8510_i2c_id[] = { | 
|  | { "wm8510", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id); | 
|  |  | 
|  | static struct i2c_driver wm8510_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "wm8510", | 
|  | .of_match_table = wm8510_of_match, | 
|  | }, | 
|  | .probe =    wm8510_i2c_probe, | 
|  | .id_table = wm8510_i2c_id, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static int __init wm8510_modinit(void) | 
|  | { | 
|  | int ret = 0; | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  | ret = i2c_add_driver(&wm8510_i2c_driver); | 
|  | if (ret != 0) { | 
|  | printk(KERN_ERR "Failed to register WM8510 I2C driver: %d\n", | 
|  | ret); | 
|  | } | 
|  | #endif | 
|  | #if defined(CONFIG_SPI_MASTER) | 
|  | ret = spi_register_driver(&wm8510_spi_driver); | 
|  | if (ret != 0) { | 
|  | printk(KERN_ERR "Failed to register WM8510 SPI driver: %d\n", | 
|  | ret); | 
|  | } | 
|  | #endif | 
|  | return ret; | 
|  | } | 
|  | module_init(wm8510_modinit); | 
|  |  | 
|  | static void __exit wm8510_exit(void) | 
|  | { | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  | i2c_del_driver(&wm8510_i2c_driver); | 
|  | #endif | 
|  | #if defined(CONFIG_SPI_MASTER) | 
|  | spi_unregister_driver(&wm8510_spi_driver); | 
|  | #endif | 
|  | } | 
|  | module_exit(wm8510_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("ASoC WM8510 driver"); | 
|  | MODULE_AUTHOR("Liam Girdwood"); | 
|  | MODULE_LICENSE("GPL"); |