|  | Kernel driver ics932s401 | 
|  | ====================== | 
|  |  | 
|  | Supported chips: | 
|  | * IDT ICS932S401 | 
|  | Prefix: 'ics932s401' | 
|  | Addresses scanned: I2C 0x69 | 
|  | Datasheet: Publicly available at the IDT website | 
|  |  | 
|  | Author: Darrick J. Wong | 
|  |  | 
|  | Description | 
|  | ----------- | 
|  |  | 
|  | This driver implements support for the IDT ICS932S401 chip family. | 
|  |  | 
|  | This chip has 4 clock outputs--a base clock for the CPU (which is likely | 
|  | multiplied to get the real CPU clock), a system clock, a PCI clock, a USB | 
|  | clock, and a reference clock.  The driver reports selected and actual | 
|  | frequency.  If spread spectrum mode is enabled, the driver also reports by what | 
|  | percent the clock signal is being spread, which should be between 0 and -0.5%. | 
|  | All frequencies are reported in KHz. | 
|  |  | 
|  | The ICS932S401 monitors all inputs continuously. The driver will not read | 
|  | the registers more often than once every other second. | 
|  |  | 
|  | Special Features | 
|  | ---------------- | 
|  |  | 
|  | The clocks could be reprogrammed to increase system speed.  I will not help you | 
|  | do this, as you risk damaging your system! |