|  | /* | 
|  | * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c | 
|  | * | 
|  | * code specific to pxa3xx aka Monahans | 
|  | * | 
|  | * Copyright (C) 2010 CompuLab Ltd. | 
|  | * | 
|  | * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il> | 
|  | *             initial version: pxa310 USB Host mode support | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/otg.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include "regs-u2d.h" | 
|  | #include <linux/platform_data/usb-pxa3xx-ulpi.h> | 
|  |  | 
|  | struct pxa3xx_u2d_ulpi { | 
|  | struct clk		*clk; | 
|  | void __iomem		*mmio_base; | 
|  |  | 
|  | struct usb_phy		*otg; | 
|  | unsigned int		ulpi_mode; | 
|  | }; | 
|  |  | 
|  | static struct pxa3xx_u2d_ulpi *u2d; | 
|  |  | 
|  | static inline u32 u2d_readl(u32 reg) | 
|  | { | 
|  | return __raw_readl(u2d->mmio_base + reg); | 
|  | } | 
|  |  | 
|  | static inline void u2d_writel(u32 reg, u32 val) | 
|  | { | 
|  | __raw_writel(val, u2d->mmio_base + reg); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_PXA310_ULPI) | 
|  | enum u2d_ulpi_phy_mode { | 
|  | SYNCH		= 0, | 
|  | CARKIT		= (1 << 0), | 
|  | SER_3PIN	= (1 << 1), | 
|  | SER_6PIN	= (1 << 2), | 
|  | LOWPOWER	= (1 << 3), | 
|  | }; | 
|  |  | 
|  | static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void) | 
|  | { | 
|  | return (u2d_readl(U2DOTGUSR) >> 28) & 0xF; | 
|  | } | 
|  |  | 
|  | static int pxa310_ulpi_poll(void) | 
|  | { | 
|  | int timeout = 50000; | 
|  |  | 
|  | while (timeout--) { | 
|  | if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN)) | 
|  | return 0; | 
|  |  | 
|  | cpu_relax(); | 
|  | } | 
|  |  | 
|  | pr_warn("%s: ULPI access timed out!\n", __func__); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (pxa310_ulpi_get_phymode() != SYNCH) { | 
|  | pr_warn("%s: PHY is not in SYNCH mode!\n", __func__); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16)); | 
|  | msleep(5); | 
|  |  | 
|  | err = pxa310_ulpi_poll(); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA; | 
|  | } | 
|  |  | 
|  | static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg) | 
|  | { | 
|  | if (pxa310_ulpi_get_phymode() != SYNCH) { | 
|  | pr_warn("%s: PHY is not in SYNCH mode!\n", __func__); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8)); | 
|  | msleep(5); | 
|  |  | 
|  | return pxa310_ulpi_poll(); | 
|  | } | 
|  |  | 
|  | struct usb_phy_io_ops pxa310_ulpi_access_ops = { | 
|  | .read	= pxa310_ulpi_read, | 
|  | .write	= pxa310_ulpi_write, | 
|  | }; | 
|  |  | 
|  | static void pxa310_otg_transceiver_rtsm(void) | 
|  | { | 
|  | u32 u2dotgcr; | 
|  |  | 
|  | /* put PHY to sync mode */ | 
|  | u2dotgcr = u2d_readl(U2DOTGCR); | 
|  | u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID; | 
|  | u2d_writel(U2DOTGCR, u2dotgcr); | 
|  | msleep(10); | 
|  |  | 
|  | /* setup OTG sync mode */ | 
|  | u2dotgcr = u2d_readl(U2DOTGCR); | 
|  | u2dotgcr |= U2DOTGCR_ULAF; | 
|  | u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF); | 
|  | u2d_writel(U2DOTGCR, u2dotgcr); | 
|  | } | 
|  |  | 
|  | static int pxa310_start_otg_host_transcvr(struct usb_bus *host) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | pxa310_otg_transceiver_rtsm(); | 
|  |  | 
|  | err = usb_phy_init(u2d->otg); | 
|  | if (err) { | 
|  | pr_err("OTG transceiver init failed"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = otg_set_vbus(u2d->otg->otg, 1); | 
|  | if (err) { | 
|  | pr_err("OTG transceiver VBUS set failed"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = otg_set_host(u2d->otg->otg, host); | 
|  | if (err) | 
|  | pr_err("OTG transceiver Host mode set failed"); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int pxa310_start_otg_hc(struct usb_bus *host) | 
|  | { | 
|  | u32 u2dotgcr; | 
|  | int err; | 
|  |  | 
|  | /* disable USB device controller */ | 
|  | u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE); | 
|  | u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID); | 
|  | u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F); | 
|  |  | 
|  | err = pxa310_start_otg_host_transcvr(host); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* set xceiver mode */ | 
|  | if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL) | 
|  | u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS); | 
|  | else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL) | 
|  | u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS); | 
|  |  | 
|  | /* start OTG host controller */ | 
|  | u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF; | 
|  | u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pxa310_stop_otg_hc(void) | 
|  | { | 
|  | pxa310_otg_transceiver_rtsm(); | 
|  |  | 
|  | otg_set_host(u2d->otg->otg, NULL); | 
|  | otg_set_vbus(u2d->otg->otg, 0); | 
|  | usb_phy_shutdown(u2d->otg); | 
|  | } | 
|  |  | 
|  | static void pxa310_u2d_setup_otg_hc(void) | 
|  | { | 
|  | u32 u2dotgcr; | 
|  |  | 
|  | u2dotgcr = u2d_readl(U2DOTGCR); | 
|  | u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID; | 
|  | u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF); | 
|  | u2d_writel(U2DOTGCR, u2dotgcr); | 
|  | msleep(5); | 
|  | u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE); | 
|  | msleep(5); | 
|  | u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F); | 
|  | } | 
|  |  | 
|  | static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata) | 
|  | { | 
|  | unsigned int ulpi_mode = ULPI_OTG_DRVVBUS; | 
|  |  | 
|  | if (pdata) { | 
|  | if (pdata->ulpi_mode & ULPI_SER_6PIN) | 
|  | ulpi_mode |= ULPI_IC_6PIN_SERIAL; | 
|  | else if (pdata->ulpi_mode & ULPI_SER_3PIN) | 
|  | ulpi_mode |= ULPI_IC_3PIN_SERIAL; | 
|  | } | 
|  |  | 
|  | u2d->ulpi_mode = ulpi_mode; | 
|  |  | 
|  | u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode); | 
|  | if (!u2d->otg) | 
|  | return -ENOMEM; | 
|  |  | 
|  | u2d->otg->io_priv = u2d->mmio_base; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pxa310_otg_exit(void) | 
|  | { | 
|  | kfree(u2d->otg); | 
|  | } | 
|  | #else | 
|  | static inline void pxa310_u2d_setup_otg_hc(void) {} | 
|  | static inline int pxa310_start_otg_hc(struct usb_bus *host) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | static inline void pxa310_stop_otg_hc(void) {} | 
|  | static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | static inline void pxa310_otg_exit(void) {} | 
|  | #endif /* CONFIG_PXA310_ULPI */ | 
|  |  | 
|  | int pxa3xx_u2d_start_hc(struct usb_bus *host) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | /* In case the PXA3xx ULPI isn't used, do nothing. */ | 
|  | if (!u2d) | 
|  | return 0; | 
|  |  | 
|  | clk_prepare_enable(u2d->clk); | 
|  |  | 
|  | if (cpu_is_pxa310()) { | 
|  | pxa310_u2d_setup_otg_hc(); | 
|  | err = pxa310_start_otg_hc(host); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc); | 
|  |  | 
|  | void pxa3xx_u2d_stop_hc(struct usb_bus *host) | 
|  | { | 
|  | /* In case the PXA3xx ULPI isn't used, do nothing. */ | 
|  | if (!u2d) | 
|  | return; | 
|  |  | 
|  | if (cpu_is_pxa310()) | 
|  | pxa310_stop_otg_hc(); | 
|  |  | 
|  | clk_disable_unprepare(u2d->clk); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc); | 
|  |  | 
|  | static int pxa3xx_u2d_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct resource *r; | 
|  | int err; | 
|  |  | 
|  | u2d = kzalloc(sizeof(*u2d), GFP_KERNEL); | 
|  | if (!u2d) | 
|  | return -ENOMEM; | 
|  |  | 
|  | u2d->clk = clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(u2d->clk)) { | 
|  | dev_err(&pdev->dev, "failed to get u2d clock\n"); | 
|  | err = PTR_ERR(u2d->clk); | 
|  | goto err_free_mem; | 
|  | } | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!r) { | 
|  | dev_err(&pdev->dev, "no IO memory resource defined\n"); | 
|  | err = -ENODEV; | 
|  | goto err_put_clk; | 
|  | } | 
|  |  | 
|  | r = request_mem_region(r->start, resource_size(r), pdev->name); | 
|  | if (!r) { | 
|  | dev_err(&pdev->dev, "failed to request memory resource\n"); | 
|  | err = -EBUSY; | 
|  | goto err_put_clk; | 
|  | } | 
|  |  | 
|  | u2d->mmio_base = ioremap(r->start, resource_size(r)); | 
|  | if (!u2d->mmio_base) { | 
|  | dev_err(&pdev->dev, "ioremap() failed\n"); | 
|  | err = -ENODEV; | 
|  | goto err_free_res; | 
|  | } | 
|  |  | 
|  | if (pdata->init) { | 
|  | err = pdata->init(&pdev->dev); | 
|  | if (err) | 
|  | goto err_free_io; | 
|  | } | 
|  |  | 
|  | /* Only PXA310 U2D has OTG functionality */ | 
|  | if (cpu_is_pxa310()) { | 
|  | err = pxa310_otg_init(pdata); | 
|  | if (err) | 
|  | goto err_free_plat; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, u2d); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_plat: | 
|  | if (pdata->exit) | 
|  | pdata->exit(&pdev->dev); | 
|  | err_free_io: | 
|  | iounmap(u2d->mmio_base); | 
|  | err_free_res: | 
|  | release_mem_region(r->start, resource_size(r)); | 
|  | err_put_clk: | 
|  | clk_put(u2d->clk); | 
|  | err_free_mem: | 
|  | kfree(u2d); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int pxa3xx_u2d_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct resource *r; | 
|  |  | 
|  | if (cpu_is_pxa310()) { | 
|  | pxa310_stop_otg_hc(); | 
|  | pxa310_otg_exit(); | 
|  | } | 
|  |  | 
|  | if (pdata->exit) | 
|  | pdata->exit(&pdev->dev); | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | iounmap(u2d->mmio_base); | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | release_mem_region(r->start, resource_size(r)); | 
|  |  | 
|  | clk_put(u2d->clk); | 
|  |  | 
|  | kfree(u2d); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver pxa3xx_u2d_ulpi_driver = { | 
|  | .driver		= { | 
|  | .name   = "pxa3xx-u2d", | 
|  | }, | 
|  | .probe          = pxa3xx_u2d_probe, | 
|  | .remove         = pxa3xx_u2d_remove, | 
|  | }; | 
|  | module_platform_driver(pxa3xx_u2d_ulpi_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("PXA3xx U2D ULPI driver"); | 
|  | MODULE_AUTHOR("Igor Grinberg"); | 
|  | MODULE_LICENSE("GPL v2"); |