|  | /* | 
|  | *  AMD K7 Powernow driver. | 
|  | *  (C) 2003 Dave Jones on behalf of SuSE Labs. | 
|  | * | 
|  | *  Licensed under the terms of the GNU GPL License version 2. | 
|  | *  Based upon datasheets & sample CPUs kindly provided by AMD. | 
|  | * | 
|  | * Errata 5: | 
|  | *  CPU may fail to execute a FID/VID change in presence of interrupt. | 
|  | *  - We cli/sti on stepping A0 CPUs around the FID/VID transition. | 
|  | * Errata 15: | 
|  | *  CPU with half frequency multipliers may hang upon wakeup from disconnect. | 
|  | *  - We disable half multipliers if ACPI is used on A0 stepping CPUs. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/timex.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */ | 
|  | #include <asm/msr.h> | 
|  | #include <asm/cpu_device_id.h> | 
|  |  | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  | #include <linux/acpi.h> | 
|  | #include <acpi/processor.h> | 
|  | #endif | 
|  |  | 
|  | #include "powernow-k7.h" | 
|  |  | 
|  | struct psb_s { | 
|  | u8 signature[10]; | 
|  | u8 tableversion; | 
|  | u8 flags; | 
|  | u16 settlingtime; | 
|  | u8 reserved1; | 
|  | u8 numpst; | 
|  | }; | 
|  |  | 
|  | struct pst_s { | 
|  | u32 cpuid; | 
|  | u8 fsbspeed; | 
|  | u8 maxfid; | 
|  | u8 startvid; | 
|  | u8 numpstates; | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  | union powernow_acpi_control_t { | 
|  | struct { | 
|  | unsigned long fid:5, | 
|  | vid:5, | 
|  | sgtc:20, | 
|  | res1:2; | 
|  | } bits; | 
|  | unsigned long val; | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | /* divide by 1000 to get VCore voltage in V. */ | 
|  | static const int mobile_vid_table[32] = { | 
|  | 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, | 
|  | 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, | 
|  | 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, | 
|  | 1075, 1050, 1025, 1000, 975, 950, 925, 0, | 
|  | }; | 
|  |  | 
|  | /* divide by 10 to get FID. */ | 
|  | static const int fid_codes[32] = { | 
|  | 110, 115, 120, 125, 50, 55, 60, 65, | 
|  | 70, 75, 80, 85, 90, 95, 100, 105, | 
|  | 30, 190, 40, 200, 130, 135, 140, 210, | 
|  | 150, 225, 160, 165, 170, 180, -1, -1, | 
|  | }; | 
|  |  | 
|  | /* This parameter is used in order to force ACPI instead of legacy method for | 
|  | * configuration purpose. | 
|  | */ | 
|  |  | 
|  | static int acpi_force; | 
|  |  | 
|  | static struct cpufreq_frequency_table *powernow_table; | 
|  |  | 
|  | static unsigned int can_scale_bus; | 
|  | static unsigned int can_scale_vid; | 
|  | static unsigned int minimum_speed = -1; | 
|  | static unsigned int maximum_speed; | 
|  | static unsigned int number_scales; | 
|  | static unsigned int fsb; | 
|  | static unsigned int latency; | 
|  | static char have_a0; | 
|  |  | 
|  | static int check_fsb(unsigned int fsbspeed) | 
|  | { | 
|  | int delta; | 
|  | unsigned int f = fsb / 1000; | 
|  |  | 
|  | delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; | 
|  | return delta < 5; | 
|  | } | 
|  |  | 
|  | static const struct x86_cpu_id powernow_k7_cpuids[] = { | 
|  | { X86_VENDOR_AMD, 6, }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids); | 
|  |  | 
|  | static int check_powernow(void) | 
|  | { | 
|  | struct cpuinfo_x86 *c = &cpu_data(0); | 
|  | unsigned int maxei, eax, ebx, ecx, edx; | 
|  |  | 
|  | if (!x86_match_cpu(powernow_k7_cpuids)) | 
|  | return 0; | 
|  |  | 
|  | /* Get maximum capabilities */ | 
|  | maxei = cpuid_eax(0x80000000); | 
|  | if (maxei < 0x80000007) {	/* Any powernow info ? */ | 
|  | #ifdef MODULE | 
|  | pr_info("No powernow capabilities detected\n"); | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if ((c->x86_model == 6) && (c->x86_stepping == 0)) { | 
|  | pr_info("K7 660[A0] core detected, enabling errata workarounds\n"); | 
|  | have_a0 = 1; | 
|  | } | 
|  |  | 
|  | cpuid(0x80000007, &eax, &ebx, &ecx, &edx); | 
|  |  | 
|  | /* Check we can actually do something before we say anything.*/ | 
|  | if (!(edx & (1 << 1 | 1 << 2))) | 
|  | return 0; | 
|  |  | 
|  | pr_info("PowerNOW! Technology present. Can scale: "); | 
|  |  | 
|  | if (edx & 1 << 1) { | 
|  | pr_cont("frequency"); | 
|  | can_scale_bus = 1; | 
|  | } | 
|  |  | 
|  | if ((edx & (1 << 1 | 1 << 2)) == 0x6) | 
|  | pr_cont(" and "); | 
|  |  | 
|  | if (edx & 1 << 2) { | 
|  | pr_cont("voltage"); | 
|  | can_scale_vid = 1; | 
|  | } | 
|  |  | 
|  | pr_cont("\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  | static void invalidate_entry(unsigned int entry) | 
|  | { | 
|  | powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int get_ranges(unsigned char *pst) | 
|  | { | 
|  | unsigned int j; | 
|  | unsigned int speed; | 
|  | u8 fid, vid; | 
|  |  | 
|  | powernow_table = kzalloc((sizeof(*powernow_table) * | 
|  | (number_scales + 1)), GFP_KERNEL); | 
|  | if (!powernow_table) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (j = 0 ; j < number_scales; j++) { | 
|  | fid = *pst++; | 
|  |  | 
|  | powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; | 
|  | powernow_table[j].driver_data = fid; /* lower 8 bits */ | 
|  |  | 
|  | speed = powernow_table[j].frequency; | 
|  |  | 
|  | if ((fid_codes[fid] % 10) == 5) { | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  | if (have_a0 == 1) | 
|  | invalidate_entry(j); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | if (speed < minimum_speed) | 
|  | minimum_speed = speed; | 
|  | if (speed > maximum_speed) | 
|  | maximum_speed = speed; | 
|  |  | 
|  | vid = *pst++; | 
|  | powernow_table[j].driver_data |= (vid << 8); /* upper 8 bits */ | 
|  |  | 
|  | pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  " | 
|  | "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, | 
|  | fid_codes[fid] % 10, speed/1000, vid, | 
|  | mobile_vid_table[vid]/1000, | 
|  | mobile_vid_table[vid]%1000); | 
|  | } | 
|  | powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; | 
|  | powernow_table[number_scales].driver_data = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void change_FID(int fid) | 
|  | { | 
|  | union msr_fidvidctl fidvidctl; | 
|  |  | 
|  | rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); | 
|  | if (fidvidctl.bits.FID != fid) { | 
|  | fidvidctl.bits.SGTC = latency; | 
|  | fidvidctl.bits.FID = fid; | 
|  | fidvidctl.bits.VIDC = 0; | 
|  | fidvidctl.bits.FIDC = 1; | 
|  | wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void change_VID(int vid) | 
|  | { | 
|  | union msr_fidvidctl fidvidctl; | 
|  |  | 
|  | rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); | 
|  | if (fidvidctl.bits.VID != vid) { | 
|  | fidvidctl.bits.SGTC = latency; | 
|  | fidvidctl.bits.VID = vid; | 
|  | fidvidctl.bits.FIDC = 0; | 
|  | fidvidctl.bits.VIDC = 1; | 
|  | wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int powernow_target(struct cpufreq_policy *policy, unsigned int index) | 
|  | { | 
|  | u8 fid, vid; | 
|  | struct cpufreq_freqs freqs; | 
|  | union msr_fidvidstatus fidvidstatus; | 
|  | int cfid; | 
|  |  | 
|  | /* fid are the lower 8 bits of the index we stored into | 
|  | * the cpufreq frequency table in powernow_decode_bios, | 
|  | * vid are the upper 8 bits. | 
|  | */ | 
|  |  | 
|  | fid = powernow_table[index].driver_data & 0xFF; | 
|  | vid = (powernow_table[index].driver_data & 0xFF00) >> 8; | 
|  |  | 
|  | rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); | 
|  | cfid = fidvidstatus.bits.CFID; | 
|  | freqs.old = fsb * fid_codes[cfid] / 10; | 
|  |  | 
|  | freqs.new = powernow_table[index].frequency; | 
|  |  | 
|  | /* Now do the magic poking into the MSRs.  */ | 
|  |  | 
|  | if (have_a0 == 1)	/* A0 errata 5 */ | 
|  | local_irq_disable(); | 
|  |  | 
|  | if (freqs.old > freqs.new) { | 
|  | /* Going down, so change FID first */ | 
|  | change_FID(fid); | 
|  | change_VID(vid); | 
|  | } else { | 
|  | /* Going up, so change VID first */ | 
|  | change_VID(vid); | 
|  | change_FID(fid); | 
|  | } | 
|  |  | 
|  |  | 
|  | if (have_a0 == 1) | 
|  | local_irq_enable(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  |  | 
|  | static struct acpi_processor_performance *acpi_processor_perf; | 
|  |  | 
|  | static int powernow_acpi_init(void) | 
|  | { | 
|  | int i; | 
|  | int retval = 0; | 
|  | union powernow_acpi_control_t pc; | 
|  |  | 
|  | if (acpi_processor_perf != NULL && powernow_table != NULL) { | 
|  | retval = -EINVAL; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | acpi_processor_perf = kzalloc(sizeof(*acpi_processor_perf), GFP_KERNEL); | 
|  | if (!acpi_processor_perf) { | 
|  | retval = -ENOMEM; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, | 
|  | GFP_KERNEL)) { | 
|  | retval = -ENOMEM; | 
|  | goto err05; | 
|  | } | 
|  |  | 
|  | if (acpi_processor_register_performance(acpi_processor_perf, 0)) { | 
|  | retval = -EIO; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | if (acpi_processor_perf->control_register.space_id != | 
|  | ACPI_ADR_SPACE_FIXED_HARDWARE) { | 
|  | retval = -ENODEV; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | if (acpi_processor_perf->status_register.space_id != | 
|  | ACPI_ADR_SPACE_FIXED_HARDWARE) { | 
|  | retval = -ENODEV; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | number_scales = acpi_processor_perf->state_count; | 
|  |  | 
|  | if (number_scales < 2) { | 
|  | retval = -ENODEV; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | powernow_table = kzalloc((sizeof(*powernow_table) * | 
|  | (number_scales + 1)), GFP_KERNEL); | 
|  | if (!powernow_table) { | 
|  | retval = -ENOMEM; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | pc.val = (unsigned long) acpi_processor_perf->states[0].control; | 
|  | for (i = 0; i < number_scales; i++) { | 
|  | u8 fid, vid; | 
|  | struct acpi_processor_px *state = | 
|  | &acpi_processor_perf->states[i]; | 
|  | unsigned int speed, speed_mhz; | 
|  |  | 
|  | pc.val = (unsigned long) state->control; | 
|  | pr_debug("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", | 
|  | i, | 
|  | (u32) state->core_frequency, | 
|  | (u32) state->power, | 
|  | (u32) state->transition_latency, | 
|  | (u32) state->control, | 
|  | pc.bits.sgtc); | 
|  |  | 
|  | vid = pc.bits.vid; | 
|  | fid = pc.bits.fid; | 
|  |  | 
|  | powernow_table[i].frequency = fsb * fid_codes[fid] / 10; | 
|  | powernow_table[i].driver_data = fid; /* lower 8 bits */ | 
|  | powernow_table[i].driver_data |= (vid << 8); /* upper 8 bits */ | 
|  |  | 
|  | speed = powernow_table[i].frequency; | 
|  | speed_mhz = speed / 1000; | 
|  |  | 
|  | /* processor_perflib will multiply the MHz value by 1000 to | 
|  | * get a KHz value (e.g. 1266000). However, powernow-k7 works | 
|  | * with true KHz values (e.g. 1266768). To ensure that all | 
|  | * powernow frequencies are available, we must ensure that | 
|  | * ACPI doesn't restrict them, so we round up the MHz value | 
|  | * to ensure that perflib's computed KHz value is greater than | 
|  | * or equal to powernow's KHz value. | 
|  | */ | 
|  | if (speed % 1000 > 0) | 
|  | speed_mhz++; | 
|  |  | 
|  | if ((fid_codes[fid] % 10) == 5) { | 
|  | if (have_a0 == 1) | 
|  | invalidate_entry(i); | 
|  | } | 
|  |  | 
|  | pr_debug("   FID: 0x%x (%d.%dx [%dMHz])  " | 
|  | "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, | 
|  | fid_codes[fid] % 10, speed_mhz, vid, | 
|  | mobile_vid_table[vid]/1000, | 
|  | mobile_vid_table[vid]%1000); | 
|  |  | 
|  | if (state->core_frequency != speed_mhz) { | 
|  | state->core_frequency = speed_mhz; | 
|  | pr_debug("   Corrected ACPI frequency to %d\n", | 
|  | speed_mhz); | 
|  | } | 
|  |  | 
|  | if (latency < pc.bits.sgtc) | 
|  | latency = pc.bits.sgtc; | 
|  |  | 
|  | if (speed < minimum_speed) | 
|  | minimum_speed = speed; | 
|  | if (speed > maximum_speed) | 
|  | maximum_speed = speed; | 
|  | } | 
|  |  | 
|  | powernow_table[i].frequency = CPUFREQ_TABLE_END; | 
|  | powernow_table[i].driver_data = 0; | 
|  |  | 
|  | /* notify BIOS that we exist */ | 
|  | acpi_processor_notify_smm(THIS_MODULE); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err2: | 
|  | acpi_processor_unregister_performance(0); | 
|  | err1: | 
|  | free_cpumask_var(acpi_processor_perf->shared_cpu_map); | 
|  | err05: | 
|  | kfree(acpi_processor_perf); | 
|  | err0: | 
|  | pr_warn("ACPI perflib can not be used on this platform\n"); | 
|  | acpi_processor_perf = NULL; | 
|  | return retval; | 
|  | } | 
|  | #else | 
|  | static int powernow_acpi_init(void) | 
|  | { | 
|  | pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void print_pst_entry(struct pst_s *pst, unsigned int j) | 
|  | { | 
|  | pr_debug("PST:%d (@%p)\n", j, pst); | 
|  | pr_debug(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n", | 
|  | pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); | 
|  | } | 
|  |  | 
|  | static int powernow_decode_bios(int maxfid, int startvid) | 
|  | { | 
|  | struct psb_s *psb; | 
|  | struct pst_s *pst; | 
|  | unsigned int i, j; | 
|  | unsigned char *p; | 
|  | unsigned int etuple; | 
|  | unsigned int ret; | 
|  |  | 
|  | etuple = cpuid_eax(0x80000001); | 
|  |  | 
|  | for (i = 0xC0000; i < 0xffff0 ; i += 16) { | 
|  |  | 
|  | p = phys_to_virt(i); | 
|  |  | 
|  | if (memcmp(p, "AMDK7PNOW!",  10) == 0) { | 
|  | pr_debug("Found PSB header at %p\n", p); | 
|  | psb = (struct psb_s *) p; | 
|  | pr_debug("Table version: 0x%x\n", psb->tableversion); | 
|  | if (psb->tableversion != 0x12) { | 
|  | pr_info("Sorry, only v1.2 tables supported right now\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | pr_debug("Flags: 0x%x\n", psb->flags); | 
|  | if ((psb->flags & 1) == 0) | 
|  | pr_debug("Mobile voltage regulator\n"); | 
|  | else | 
|  | pr_debug("Desktop voltage regulator\n"); | 
|  |  | 
|  | latency = psb->settlingtime; | 
|  | if (latency < 100) { | 
|  | pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n", | 
|  | latency); | 
|  | latency = 100; | 
|  | } | 
|  | pr_debug("Settling Time: %d microseconds.\n", | 
|  | psb->settlingtime); | 
|  | pr_debug("Has %d PST tables. (Only dumping ones " | 
|  | "relevant to this CPU).\n", | 
|  | psb->numpst); | 
|  |  | 
|  | p += sizeof(*psb); | 
|  |  | 
|  | pst = (struct pst_s *) p; | 
|  |  | 
|  | for (j = 0; j < psb->numpst; j++) { | 
|  | pst = (struct pst_s *) p; | 
|  | number_scales = pst->numpstates; | 
|  |  | 
|  | if ((etuple == pst->cpuid) && | 
|  | check_fsb(pst->fsbspeed) && | 
|  | (maxfid == pst->maxfid) && | 
|  | (startvid == pst->startvid)) { | 
|  | print_pst_entry(pst, j); | 
|  | p = (char *)pst + sizeof(*pst); | 
|  | ret = get_ranges(p); | 
|  | return ret; | 
|  | } else { | 
|  | unsigned int k; | 
|  | p = (char *)pst + sizeof(*pst); | 
|  | for (k = 0; k < number_scales; k++) | 
|  | p += 2; | 
|  | } | 
|  | } | 
|  | pr_info("No PST tables match this cpuid (0x%x)\n", | 
|  | etuple); | 
|  | pr_info("This is indicative of a broken BIOS\n"); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  | p++; | 
|  | } | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * We use the fact that the bus frequency is somehow | 
|  | * a multiple of 100000/3 khz, then we compute sgtc according | 
|  | * to this multiple. | 
|  | * That way, we match more how AMD thinks all of that work. | 
|  | * We will then get the same kind of behaviour already tested under | 
|  | * the "well-known" other OS. | 
|  | */ | 
|  | static int fixup_sgtc(void) | 
|  | { | 
|  | unsigned int sgtc; | 
|  | unsigned int m; | 
|  |  | 
|  | m = fsb / 3333; | 
|  | if ((m % 10) >= 5) | 
|  | m += 5; | 
|  |  | 
|  | m /= 10; | 
|  |  | 
|  | sgtc = 100 * m * latency; | 
|  | sgtc = sgtc / 3; | 
|  | if (sgtc > 0xfffff) { | 
|  | pr_warn("SGTC too large %d\n", sgtc); | 
|  | sgtc = 0xfffff; | 
|  | } | 
|  | return sgtc; | 
|  | } | 
|  |  | 
|  | static unsigned int powernow_get(unsigned int cpu) | 
|  | { | 
|  | union msr_fidvidstatus fidvidstatus; | 
|  | unsigned int cfid; | 
|  |  | 
|  | if (cpu) | 
|  | return 0; | 
|  | rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); | 
|  | cfid = fidvidstatus.bits.CFID; | 
|  |  | 
|  | return fsb * fid_codes[cfid] / 10; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int acer_cpufreq_pst(const struct dmi_system_id *d) | 
|  | { | 
|  | pr_warn("%s laptop with broken PST tables in BIOS detected\n", | 
|  | d->ident); | 
|  | pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); | 
|  | pr_warn("cpufreq scaling has been disabled as a result of this\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some Athlon laptops have really fucked PST tables. | 
|  | * A BIOS update is all that can save them. | 
|  | * Mention this, and disable cpufreq. | 
|  | */ | 
|  | static const struct dmi_system_id powernow_dmi_table[] = { | 
|  | { | 
|  | .callback = acer_cpufreq_pst, | 
|  | .ident = "Acer Aspire", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), | 
|  | DMI_MATCH(DMI_BIOS_VERSION, "3A71"), | 
|  | }, | 
|  | }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static int powernow_cpu_init(struct cpufreq_policy *policy) | 
|  | { | 
|  | union msr_fidvidstatus fidvidstatus; | 
|  | int result; | 
|  |  | 
|  | if (policy->cpu != 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); | 
|  |  | 
|  | recalibrate_cpu_khz(); | 
|  |  | 
|  | fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; | 
|  | if (!fsb) { | 
|  | pr_warn("can not determine bus frequency\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | pr_debug("FSB: %3dMHz\n", fsb/1000); | 
|  |  | 
|  | if (dmi_check_system(powernow_dmi_table) || acpi_force) { | 
|  | pr_info("PSB/PST known to be broken - trying ACPI instead\n"); | 
|  | result = powernow_acpi_init(); | 
|  | } else { | 
|  | result = powernow_decode_bios(fidvidstatus.bits.MFID, | 
|  | fidvidstatus.bits.SVID); | 
|  | if (result) { | 
|  | pr_info("Trying ACPI perflib\n"); | 
|  | maximum_speed = 0; | 
|  | minimum_speed = -1; | 
|  | latency = 0; | 
|  | result = powernow_acpi_init(); | 
|  | if (result) { | 
|  | pr_info("ACPI and legacy methods failed\n"); | 
|  | } | 
|  | } else { | 
|  | /* SGTC use the bus clock as timer */ | 
|  | latency = fixup_sgtc(); | 
|  | pr_info("SGTC: %d\n", latency); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n", | 
|  | minimum_speed/1000, maximum_speed/1000); | 
|  |  | 
|  | policy->cpuinfo.transition_latency = | 
|  | cpufreq_scale(2000000UL, fsb, latency); | 
|  | policy->freq_table = powernow_table; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int powernow_cpu_exit(struct cpufreq_policy *policy) | 
|  | { | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  | if (acpi_processor_perf) { | 
|  | acpi_processor_unregister_performance(0); | 
|  | free_cpumask_var(acpi_processor_perf->shared_cpu_map); | 
|  | kfree(acpi_processor_perf); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | kfree(powernow_table); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct cpufreq_driver powernow_driver = { | 
|  | .verify		= cpufreq_generic_frequency_table_verify, | 
|  | .target_index	= powernow_target, | 
|  | .get		= powernow_get, | 
|  | #ifdef CONFIG_X86_POWERNOW_K7_ACPI | 
|  | .bios_limit	= acpi_processor_get_bios_limit, | 
|  | #endif | 
|  | .init		= powernow_cpu_init, | 
|  | .exit		= powernow_cpu_exit, | 
|  | .name		= "powernow-k7", | 
|  | .attr		= cpufreq_generic_attr, | 
|  | }; | 
|  |  | 
|  | static int __init powernow_init(void) | 
|  | { | 
|  | if (check_powernow() == 0) | 
|  | return -ENODEV; | 
|  | return cpufreq_register_driver(&powernow_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit powernow_exit(void) | 
|  | { | 
|  | cpufreq_unregister_driver(&powernow_driver); | 
|  | } | 
|  |  | 
|  | module_param(acpi_force,  int, 0444); | 
|  | MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); | 
|  |  | 
|  | MODULE_AUTHOR("Dave Jones"); | 
|  | MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | late_initcall(powernow_init); | 
|  | module_exit(powernow_exit); | 
|  |  |