|  | /* | 
|  | * Driver for the Texas Instruments DP83848 PHY | 
|  | * | 
|  | * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/phy.h> | 
|  |  | 
|  | #define TI_DP83848C_PHY_ID		0x20005ca0 | 
|  | #define TI_DP83620_PHY_ID		0x20005ce0 | 
|  | #define NS_DP83848C_PHY_ID		0x20005c90 | 
|  | #define TLK10X_PHY_ID			0x2000a210 | 
|  |  | 
|  | /* Registers */ | 
|  | #define DP83848_MICR			0x11 /* MII Interrupt Control Register */ | 
|  | #define DP83848_MISR			0x12 /* MII Interrupt Status Register */ | 
|  |  | 
|  | /* MICR Register Fields */ | 
|  | #define DP83848_MICR_INT_OE		BIT(0) /* Interrupt Output Enable */ | 
|  | #define DP83848_MICR_INTEN		BIT(1) /* Interrupt Enable */ | 
|  |  | 
|  | /* MISR Register Fields */ | 
|  | #define DP83848_MISR_RHF_INT_EN		BIT(0) /* Receive Error Counter */ | 
|  | #define DP83848_MISR_FHF_INT_EN		BIT(1) /* False Carrier Counter */ | 
|  | #define DP83848_MISR_ANC_INT_EN		BIT(2) /* Auto-negotiation complete */ | 
|  | #define DP83848_MISR_DUP_INT_EN		BIT(3) /* Duplex Status */ | 
|  | #define DP83848_MISR_SPD_INT_EN		BIT(4) /* Speed status */ | 
|  | #define DP83848_MISR_LINK_INT_EN	BIT(5) /* Link status */ | 
|  | #define DP83848_MISR_ED_INT_EN		BIT(6) /* Energy detect */ | 
|  | #define DP83848_MISR_LQM_INT_EN		BIT(7) /* Link Quality Monitor */ | 
|  |  | 
|  | #define DP83848_INT_EN_MASK		\ | 
|  | (DP83848_MISR_ANC_INT_EN |	\ | 
|  | DP83848_MISR_DUP_INT_EN |	\ | 
|  | DP83848_MISR_SPD_INT_EN |	\ | 
|  | DP83848_MISR_LINK_INT_EN) | 
|  |  | 
|  | static int dp83848_ack_interrupt(struct phy_device *phydev) | 
|  | { | 
|  | int err = phy_read(phydev, DP83848_MISR); | 
|  |  | 
|  | return err < 0 ? err : 0; | 
|  | } | 
|  |  | 
|  | static int dp83848_config_intr(struct phy_device *phydev) | 
|  | { | 
|  | int control, ret; | 
|  |  | 
|  | control = phy_read(phydev, DP83848_MICR); | 
|  | if (control < 0) | 
|  | return control; | 
|  |  | 
|  | if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { | 
|  | control |= DP83848_MICR_INT_OE; | 
|  | control |= DP83848_MICR_INTEN; | 
|  |  | 
|  | ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } else { | 
|  | control &= ~DP83848_MICR_INTEN; | 
|  | } | 
|  |  | 
|  | return phy_write(phydev, DP83848_MICR, control); | 
|  | } | 
|  |  | 
|  | static int dp83848_config_init(struct phy_device *phydev) | 
|  | { | 
|  | int err; | 
|  | int val; | 
|  |  | 
|  | err = genphy_config_init(phydev); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* DP83620 always reports Auto Negotiation Ability on BMSR. Instead, | 
|  | * we check initial value of BMCR Auto negotiation enable bit | 
|  | */ | 
|  | val = phy_read(phydev, MII_BMCR); | 
|  | if (!(val & BMCR_ANENABLE)) | 
|  | phydev->autoneg = AUTONEG_DISABLE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct mdio_device_id __maybe_unused dp83848_tbl[] = { | 
|  | { TI_DP83848C_PHY_ID, 0xfffffff0 }, | 
|  | { NS_DP83848C_PHY_ID, 0xfffffff0 }, | 
|  | { TI_DP83620_PHY_ID, 0xfffffff0 }, | 
|  | { TLK10X_PHY_ID, 0xfffffff0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(mdio, dp83848_tbl); | 
|  |  | 
|  | #define DP83848_PHY_DRIVER(_id, _name, _config_init)		\ | 
|  | {							\ | 
|  | .phy_id		= _id,				\ | 
|  | .phy_id_mask	= 0xfffffff0,			\ | 
|  | .name		= _name,			\ | 
|  | .features	= PHY_BASIC_FEATURES,		\ | 
|  | .flags		= PHY_HAS_INTERRUPT,		\ | 
|  | \ | 
|  | .soft_reset	= genphy_soft_reset,		\ | 
|  | .config_init	= _config_init,			\ | 
|  | .suspend	= genphy_suspend,		\ | 
|  | .resume		= genphy_resume,		\ | 
|  | \ | 
|  | /* IRQ related */				\ | 
|  | .ack_interrupt	= dp83848_ack_interrupt,	\ | 
|  | .config_intr	= dp83848_config_intr,		\ | 
|  | } | 
|  |  | 
|  | static struct phy_driver dp83848_driver[] = { | 
|  | DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY", | 
|  | genphy_config_init), | 
|  | DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY", | 
|  | genphy_config_init), | 
|  | DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY", | 
|  | dp83848_config_init), | 
|  | DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY", | 
|  | genphy_config_init), | 
|  | }; | 
|  | module_phy_driver(dp83848_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver"); | 
|  | MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); | 
|  | MODULE_LICENSE("GPL"); |