|  | /* | 
|  | * rtl8306.c: RTL8306S switch driver | 
|  | * | 
|  | * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/if.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/netlink.h> | 
|  | #include <net/genetlink.h> | 
|  | #include <linux/switch.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/version.h> | 
|  |  | 
|  | //#define DEBUG 1 | 
|  |  | 
|  | /* Global (PHY0) */ | 
|  | #define RTL8306_REG_PAGE		16 | 
|  | #define RTL8306_REG_PAGE_LO		(1 << 15) | 
|  | #define RTL8306_REG_PAGE_HI		(1 << 1) /* inverted */ | 
|  |  | 
|  | #define RTL8306_NUM_VLANS		16 | 
|  | #define RTL8306_NUM_PORTS		6 | 
|  | #define RTL8306_PORT_CPU		5 | 
|  | #define RTL8306_NUM_PAGES		4 | 
|  | #define RTL8306_NUM_REGS		32 | 
|  |  | 
|  | #define RTL_NAME_S          "RTL8306S" | 
|  | #define RTL_NAME_SD         "RTL8306SD" | 
|  | #define RTL_NAME_SDM        "RTL8306SDM" | 
|  | #define RTL_NAME_UNKNOWN    "RTL8306(unknown)" | 
|  |  | 
|  | #define RTL8306_MAGIC	0x8306 | 
|  |  | 
|  | static LIST_HEAD(phydevs); | 
|  |  | 
|  | struct rtl_priv { | 
|  | struct list_head list; | 
|  | struct switch_dev dev; | 
|  | int page; | 
|  | int type; | 
|  | int do_cpu; | 
|  | struct mii_bus *bus; | 
|  | char hwname[sizeof(RTL_NAME_UNKNOWN)]; | 
|  | bool fixup; | 
|  | }; | 
|  |  | 
|  | struct rtl_phyregs { | 
|  | int nway; | 
|  | int speed; | 
|  | int duplex; | 
|  | }; | 
|  |  | 
|  | #define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev) | 
|  |  | 
|  | enum { | 
|  | RTL_TYPE_S, | 
|  | RTL_TYPE_SD, | 
|  | RTL_TYPE_SDM, | 
|  | }; | 
|  |  | 
|  | struct rtl_reg { | 
|  | int page; | 
|  | int phy; | 
|  | int reg; | 
|  | int bits; | 
|  | int shift; | 
|  | int inverted; | 
|  | }; | 
|  |  | 
|  | #define RTL_VLAN_REGOFS(name) \ | 
|  | (RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name) | 
|  |  | 
|  | #define RTL_PORT_REGOFS(name) \ | 
|  | (RTL_REG_PORT1_##name - RTL_REG_PORT0_##name) | 
|  |  | 
|  | #define RTL_PORT_REG(id, reg) \ | 
|  | (RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg))) | 
|  |  | 
|  | #define RTL_VLAN_REG(id, reg) \ | 
|  | (RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg))) | 
|  |  | 
|  | #define RTL_GLOBAL_REGATTR(reg) \ | 
|  | .id = RTL_REG_##reg, \ | 
|  | .type = SWITCH_TYPE_INT, \ | 
|  | .ofs = 0, \ | 
|  | .set = rtl_attr_set_int, \ | 
|  | .get = rtl_attr_get_int | 
|  |  | 
|  | #define RTL_PORT_REGATTR(reg) \ | 
|  | .id = RTL_REG_PORT0_##reg, \ | 
|  | .type = SWITCH_TYPE_INT, \ | 
|  | .ofs = RTL_PORT_REGOFS(reg), \ | 
|  | .set = rtl_attr_set_port_int, \ | 
|  | .get = rtl_attr_get_port_int | 
|  |  | 
|  | #define RTL_VLAN_REGATTR(reg) \ | 
|  | .id = RTL_REG_VLAN0_##reg, \ | 
|  | .type = SWITCH_TYPE_INT, \ | 
|  | .ofs = RTL_VLAN_REGOFS(reg), \ | 
|  | .set = rtl_attr_set_vlan_int, \ | 
|  | .get = rtl_attr_get_vlan_int | 
|  |  | 
|  | enum rtl_regidx { | 
|  | RTL_REG_CHIPID, | 
|  | RTL_REG_CHIPVER, | 
|  | RTL_REG_CHIPTYPE, | 
|  | RTL_REG_CPUPORT, | 
|  |  | 
|  | RTL_REG_EN_CPUPORT, | 
|  | RTL_REG_EN_TAG_OUT, | 
|  | RTL_REG_EN_TAG_CLR, | 
|  | RTL_REG_EN_TAG_IN, | 
|  | RTL_REG_TRAP_CPU, | 
|  | RTL_REG_CPU_LINKUP, | 
|  | RTL_REG_TRUNK_PORTSEL, | 
|  | RTL_REG_EN_TRUNK, | 
|  | RTL_REG_RESET, | 
|  |  | 
|  | RTL_REG_VLAN_ENABLE, | 
|  | RTL_REG_VLAN_FILTER, | 
|  | RTL_REG_VLAN_TAG_ONLY, | 
|  | RTL_REG_VLAN_TAG_AWARE, | 
|  | #define RTL_VLAN_ENUM(id) \ | 
|  | RTL_REG_VLAN##id##_VID, \ | 
|  | RTL_REG_VLAN##id##_PORTMASK | 
|  | RTL_VLAN_ENUM(0), | 
|  | RTL_VLAN_ENUM(1), | 
|  | RTL_VLAN_ENUM(2), | 
|  | RTL_VLAN_ENUM(3), | 
|  | RTL_VLAN_ENUM(4), | 
|  | RTL_VLAN_ENUM(5), | 
|  | RTL_VLAN_ENUM(6), | 
|  | RTL_VLAN_ENUM(7), | 
|  | RTL_VLAN_ENUM(8), | 
|  | RTL_VLAN_ENUM(9), | 
|  | RTL_VLAN_ENUM(10), | 
|  | RTL_VLAN_ENUM(11), | 
|  | RTL_VLAN_ENUM(12), | 
|  | RTL_VLAN_ENUM(13), | 
|  | RTL_VLAN_ENUM(14), | 
|  | RTL_VLAN_ENUM(15), | 
|  | #define RTL_PORT_ENUM(id) \ | 
|  | RTL_REG_PORT##id##_PVID, \ | 
|  | RTL_REG_PORT##id##_NULL_VID_REPLACE, \ | 
|  | RTL_REG_PORT##id##_NON_PVID_DISCARD, \ | 
|  | RTL_REG_PORT##id##_VID_INSERT, \ | 
|  | RTL_REG_PORT##id##_TAG_INSERT, \ | 
|  | RTL_REG_PORT##id##_LINK, \ | 
|  | RTL_REG_PORT##id##_SPEED, \ | 
|  | RTL_REG_PORT##id##_NWAY, \ | 
|  | RTL_REG_PORT##id##_NRESTART, \ | 
|  | RTL_REG_PORT##id##_DUPLEX, \ | 
|  | RTL_REG_PORT##id##_RXEN, \ | 
|  | RTL_REG_PORT##id##_TXEN | 
|  | RTL_PORT_ENUM(0), | 
|  | RTL_PORT_ENUM(1), | 
|  | RTL_PORT_ENUM(2), | 
|  | RTL_PORT_ENUM(3), | 
|  | RTL_PORT_ENUM(4), | 
|  | RTL_PORT_ENUM(5), | 
|  | }; | 
|  |  | 
|  | static const struct rtl_reg rtl_regs[] = { | 
|  | [RTL_REG_CHIPID]         = { 0, 4, 30, 16,  0, 0 }, | 
|  | [RTL_REG_CHIPVER]        = { 0, 4, 31,  8,  0, 0 }, | 
|  | [RTL_REG_CHIPTYPE]       = { 0, 4, 31,  2,  8, 0 }, | 
|  |  | 
|  | /* CPU port number */ | 
|  | [RTL_REG_CPUPORT]        = { 2, 4, 21,  3,  0, 0 }, | 
|  | /* Enable CPU port function */ | 
|  | [RTL_REG_EN_CPUPORT]     = { 3, 2, 21,  1, 15, 1 }, | 
|  | /* Enable CPU port tag insertion */ | 
|  | [RTL_REG_EN_TAG_OUT]     = { 3, 2, 21,  1, 12, 0 }, | 
|  | /* Enable CPU port tag removal */ | 
|  | [RTL_REG_EN_TAG_CLR]     = { 3, 2, 21,  1, 11, 0 }, | 
|  | /* Enable CPU port tag checking */ | 
|  | [RTL_REG_EN_TAG_IN]      = { 0, 4, 21,  1,  7, 0 }, | 
|  | [RTL_REG_EN_TRUNK]       = { 0, 0, 19,  1, 11, 1 }, | 
|  | [RTL_REG_TRUNK_PORTSEL]  = { 0, 0, 16,  1,  6, 1 }, | 
|  | [RTL_REG_RESET]          = { 0, 0, 16,  1, 12, 0 }, | 
|  |  | 
|  | [RTL_REG_TRAP_CPU]       = { 3, 2, 22,  1,  6, 0 }, | 
|  | [RTL_REG_CPU_LINKUP]     = { 0, 6, 22,  1, 15, 0 }, | 
|  |  | 
|  | [RTL_REG_VLAN_TAG_ONLY]  = { 0, 0, 16,  1,  8, 1 }, | 
|  | [RTL_REG_VLAN_FILTER]    = { 0, 0, 16,  1,  9, 1 }, | 
|  | [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16,  1, 10, 1 }, | 
|  | [RTL_REG_VLAN_ENABLE]    = { 0, 0, 18,  1,  8, 1 }, | 
|  |  | 
|  | #define RTL_VLAN_REGS(id, phy, page, regofs) \ | 
|  | [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \ | 
|  | [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 } | 
|  | RTL_VLAN_REGS( 0, 0, 0, 0), | 
|  | RTL_VLAN_REGS( 1, 1, 0, 0), | 
|  | RTL_VLAN_REGS( 2, 2, 0, 0), | 
|  | RTL_VLAN_REGS( 3, 3, 0, 0), | 
|  | RTL_VLAN_REGS( 4, 4, 0, 0), | 
|  | RTL_VLAN_REGS( 5, 0, 1, 2), | 
|  | RTL_VLAN_REGS( 6, 1, 1, 2), | 
|  | RTL_VLAN_REGS( 7, 2, 1, 2), | 
|  | RTL_VLAN_REGS( 8, 3, 1, 2), | 
|  | RTL_VLAN_REGS( 9, 4, 1, 2), | 
|  | RTL_VLAN_REGS(10, 0, 1, 4), | 
|  | RTL_VLAN_REGS(11, 1, 1, 4), | 
|  | RTL_VLAN_REGS(12, 2, 1, 4), | 
|  | RTL_VLAN_REGS(13, 3, 1, 4), | 
|  | RTL_VLAN_REGS(14, 4, 1, 4), | 
|  | RTL_VLAN_REGS(15, 0, 1, 6), | 
|  |  | 
|  | #define REG_PORT_SETTING(port, phy) \ | 
|  | [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \ | 
|  | [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \ | 
|  | [RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \ | 
|  | [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \ | 
|  | [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \ | 
|  | [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \ | 
|  | [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \ | 
|  | [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \ | 
|  | [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \ | 
|  | [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \ | 
|  | [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 } | 
|  |  | 
|  | REG_PORT_SETTING(0, 0), | 
|  | REG_PORT_SETTING(1, 1), | 
|  | REG_PORT_SETTING(2, 2), | 
|  | REG_PORT_SETTING(3, 3), | 
|  | REG_PORT_SETTING(4, 4), | 
|  | REG_PORT_SETTING(5, 6), | 
|  |  | 
|  | #define REG_PORT_PVID(phy, page, regofs) \ | 
|  | { page, phy, 24 + regofs, 4, 12, 0 } | 
|  | [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0), | 
|  | [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0), | 
|  | [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0), | 
|  | [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0), | 
|  | [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0), | 
|  | [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2), | 
|  | }; | 
|  |  | 
|  |  | 
|  | static inline void | 
|  | rtl_set_page(struct rtl_priv *priv, unsigned int page) | 
|  | { | 
|  | struct mii_bus *bus = priv->bus; | 
|  | u16 pgsel; | 
|  |  | 
|  | if (priv->fixup) | 
|  | return; | 
|  |  | 
|  | if (priv->page == page) | 
|  | return; | 
|  |  | 
|  | BUG_ON(page > RTL8306_NUM_PAGES); | 
|  | pgsel = bus->read(bus, 0, RTL8306_REG_PAGE); | 
|  | pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI); | 
|  | if (page & (1 << 0)) | 
|  | pgsel |= RTL8306_REG_PAGE_LO; | 
|  | if (!(page & (1 << 1))) /* bit is inverted */ | 
|  | pgsel |= RTL8306_REG_PAGE_HI; | 
|  | bus->write(bus, 0, RTL8306_REG_PAGE, pgsel); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | struct mii_bus *bus = priv->bus; | 
|  |  | 
|  | rtl_set_page(priv, page); | 
|  | bus->write(bus, phy, reg, val); | 
|  | bus->read(bus, phy, reg); /* flush */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | struct mii_bus *bus = priv->bus; | 
|  |  | 
|  | rtl_set_page(priv, page); | 
|  | return bus->read(bus, phy, reg); | 
|  | } | 
|  |  | 
|  | static inline u16 | 
|  | rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | struct mii_bus *bus = priv->bus; | 
|  | u16 r; | 
|  |  | 
|  | rtl_set_page(priv, page); | 
|  | r = bus->read(bus, phy, reg); | 
|  | r &= ~mask; | 
|  | r |= val; | 
|  | bus->write(bus, phy, reg, r); | 
|  | return bus->read(bus, phy, reg); /* flush */ | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline int | 
|  | rtl_get(struct switch_dev *dev, enum rtl_regidx s) | 
|  | { | 
|  | const struct rtl_reg *r = &rtl_regs[s]; | 
|  | u16 val; | 
|  |  | 
|  | BUG_ON(s >= ARRAY_SIZE(rtl_regs)); | 
|  | if (r->bits == 0) /* unimplemented */ | 
|  | return 0; | 
|  |  | 
|  | val = rtl_r16(dev, r->page, r->phy, r->reg); | 
|  |  | 
|  | if (r->shift > 0) | 
|  | val >>= r->shift; | 
|  |  | 
|  | if (r->inverted) | 
|  | val = ~val; | 
|  |  | 
|  | val &= (1 << r->bits) - 1; | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val) | 
|  | { | 
|  | const struct rtl_reg *r = &rtl_regs[s]; | 
|  | u16 mask = 0xffff; | 
|  |  | 
|  | BUG_ON(s >= ARRAY_SIZE(rtl_regs)); | 
|  |  | 
|  | if (r->bits == 0) /* unimplemented */ | 
|  | return 0; | 
|  |  | 
|  | if (r->shift > 0) | 
|  | val <<= r->shift; | 
|  |  | 
|  | if (r->inverted) | 
|  | val = ~val; | 
|  |  | 
|  | if (r->bits != 16) { | 
|  | mask = (1 << r->bits) - 1; | 
|  | mask <<= r->shift; | 
|  | } | 
|  | val &= mask; | 
|  | return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val); | 
|  | } | 
|  |  | 
|  | static void | 
|  | rtl_phy_save(struct switch_dev *dev, int port, struct rtl_phyregs *regs) | 
|  | { | 
|  | regs->nway = rtl_get(dev, RTL_PORT_REG(port, NWAY)); | 
|  | regs->speed = rtl_get(dev, RTL_PORT_REG(port, SPEED)); | 
|  | regs->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX)); | 
|  | } | 
|  |  | 
|  | static void | 
|  | rtl_phy_restore(struct switch_dev *dev, int port, struct rtl_phyregs *regs) | 
|  | { | 
|  | rtl_set(dev, RTL_PORT_REG(port, NWAY), regs->nway); | 
|  | rtl_set(dev, RTL_PORT_REG(port, SPEED), regs->speed); | 
|  | rtl_set(dev, RTL_PORT_REG(port, DUPLEX), regs->duplex); | 
|  | } | 
|  |  | 
|  | static void | 
|  | rtl_port_set_enable(struct switch_dev *dev, int port, int enabled) | 
|  | { | 
|  | rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled); | 
|  | rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled); | 
|  |  | 
|  | if ((port >= 5) || !enabled) | 
|  | return; | 
|  |  | 
|  | /* restart autonegotiation if enabled */ | 
|  | rtl_set(dev, RTL_PORT_REG(port, NRESTART), 1); | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_hw_apply(struct switch_dev *dev) | 
|  | { | 
|  | int i; | 
|  | int trunk_en, trunk_psel; | 
|  | struct rtl_phyregs port5; | 
|  |  | 
|  | rtl_phy_save(dev, 5, &port5); | 
|  |  | 
|  | /* disable rx/tx from PHYs */ | 
|  | for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) { | 
|  | rtl_port_set_enable(dev, i, 0); | 
|  | } | 
|  |  | 
|  | /* save trunking status */ | 
|  | trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK); | 
|  | trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL); | 
|  |  | 
|  | /* trunk port 3 and 4 | 
|  | * XXX: Big WTF, but RealTek seems to do it */ | 
|  | rtl_set(dev, RTL_REG_EN_TRUNK, 1); | 
|  | rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1); | 
|  |  | 
|  | /* execute the software reset */ | 
|  | rtl_set(dev, RTL_REG_RESET, 1); | 
|  |  | 
|  | /* wait for the reset to complete, | 
|  | * but don't wait for too long */ | 
|  | for (i = 0; i < 10; i++) { | 
|  | if (rtl_get(dev, RTL_REG_RESET) == 0) | 
|  | break; | 
|  |  | 
|  | msleep(1); | 
|  | } | 
|  |  | 
|  | /* enable rx/tx from PHYs */ | 
|  | for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) { | 
|  | rtl_port_set_enable(dev, i, 1); | 
|  | } | 
|  |  | 
|  | /* restore trunking settings */ | 
|  | rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en); | 
|  | rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel); | 
|  | rtl_phy_restore(dev, 5, &port5); | 
|  |  | 
|  | rtl_set(dev, RTL_REG_CPU_LINKUP, 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | rtl_hw_init(struct switch_dev *dev) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | int cpu_mask = 1 << dev->cpu_port; | 
|  | int i; | 
|  |  | 
|  | rtl_set(dev, RTL_REG_VLAN_ENABLE, 0); | 
|  | rtl_set(dev, RTL_REG_VLAN_FILTER, 0); | 
|  | rtl_set(dev, RTL_REG_EN_TRUNK, 0); | 
|  | rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0); | 
|  |  | 
|  | /* initialize cpu port settings */ | 
|  | if (priv->do_cpu) { | 
|  | rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port); | 
|  | rtl_set(dev, RTL_REG_EN_CPUPORT, 1); | 
|  | } else { | 
|  | rtl_set(dev, RTL_REG_CPUPORT, 7); | 
|  | rtl_set(dev, RTL_REG_EN_CPUPORT, 0); | 
|  | } | 
|  | rtl_set(dev, RTL_REG_EN_TAG_OUT, 0); | 
|  | rtl_set(dev, RTL_REG_EN_TAG_IN, 0); | 
|  | rtl_set(dev, RTL_REG_EN_TAG_CLR, 0); | 
|  |  | 
|  | /* reset all vlans */ | 
|  | for (i = 0; i < RTL8306_NUM_VLANS; i++) { | 
|  | rtl_set(dev, RTL_VLAN_REG(i, VID), i); | 
|  | rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0); | 
|  | } | 
|  |  | 
|  | /* default to port isolation */ | 
|  | for (i = 0; i < RTL8306_NUM_PORTS; i++) { | 
|  | unsigned long mask; | 
|  |  | 
|  | if ((1 << i) == cpu_mask) | 
|  | mask = ((1 << RTL8306_NUM_PORTS) - 1) & ~cpu_mask; /* all bits set */ | 
|  | else | 
|  | mask = cpu_mask | (1 << i); | 
|  |  | 
|  | rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), mask); | 
|  | rtl_set(dev, RTL_PORT_REG(i, PVID), i); | 
|  | rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1); | 
|  | rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1); | 
|  | rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3); | 
|  | } | 
|  | rtl_hw_apply(dev); | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | static int | 
|  | rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | priv->do_cpu = val->value.i; | 
|  | rtl_hw_init(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | val->value.i = priv->do_cpu; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | dev->cpu_port = val->value.i; | 
|  | rtl_hw_init(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | val->value.i = dev->cpu_port; | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int | 
|  | rtl_reset(struct switch_dev *dev) | 
|  | { | 
|  | rtl_hw_init(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | int idx = attr->id + (val->port_vlan * attr->ofs); | 
|  | struct rtl_phyregs port; | 
|  |  | 
|  | if (attr->id >= ARRAY_SIZE(rtl_regs)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((attr->max > 0) && (val->value.i > attr->max)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* access to phy register 22 on port 4/5 | 
|  | * needs phy status save/restore */ | 
|  | if ((val->port_vlan > 3) && | 
|  | (rtl_regs[idx].reg == 22) && | 
|  | (rtl_regs[idx].page == 0)) { | 
|  |  | 
|  | rtl_phy_save(dev, val->port_vlan, &port); | 
|  | rtl_set(dev, idx, val->value.i); | 
|  | rtl_phy_restore(dev, val->port_vlan, &port); | 
|  | } else { | 
|  | rtl_set(dev, idx, val->value.i); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | int idx = attr->id + (val->port_vlan * attr->ofs); | 
|  |  | 
|  | if (idx >= ARRAY_SIZE(rtl_regs)) | 
|  | return -EINVAL; | 
|  |  | 
|  | val->value.i = rtl_get(dev, idx); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | if (val->port_vlan >= RTL8306_NUM_PORTS) | 
|  | return -EINVAL; | 
|  |  | 
|  | return rtl_attr_set_int(dev, attr, val); | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | if (val->port_vlan >= RTL8306_NUM_PORTS) | 
|  | return -EINVAL; | 
|  | return rtl_attr_get_int(dev, attr, val); | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_get_port_link(struct switch_dev *dev, int port, struct switch_port_link *link) | 
|  | { | 
|  | if (port >= RTL8306_NUM_PORTS) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* in case the link changes from down to up, the register is only updated on read */ | 
|  | link->link = rtl_get(dev, RTL_PORT_REG(port, LINK)); | 
|  | if (!link->link) | 
|  | link->link = rtl_get(dev, RTL_PORT_REG(port, LINK)); | 
|  |  | 
|  | if (!link->link) | 
|  | return 0; | 
|  |  | 
|  | link->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX)); | 
|  | link->aneg = rtl_get(dev, RTL_PORT_REG(port, NWAY)); | 
|  |  | 
|  | if (rtl_get(dev, RTL_PORT_REG(port, SPEED))) | 
|  | link->speed = SWITCH_PORT_SPEED_100; | 
|  | else | 
|  | link->speed = SWITCH_PORT_SPEED_10; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | if (val->port_vlan >= dev->vlans) | 
|  | return -EINVAL; | 
|  |  | 
|  | return rtl_attr_set_int(dev, attr, val); | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | if (val->port_vlan >= dev->vlans) | 
|  | return -EINVAL; | 
|  |  | 
|  | return rtl_attr_get_int(dev, attr, val); | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_get_ports(struct switch_dev *dev, struct switch_val *val) | 
|  | { | 
|  | unsigned int i, mask; | 
|  |  | 
|  | mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK)); | 
|  | for (i = 0; i < RTL8306_NUM_PORTS; i++) { | 
|  | struct switch_port *port; | 
|  |  | 
|  | if (!(mask & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | port = &val->value.ports[val->len]; | 
|  | port->id = i; | 
|  | if (rtl_get(dev, RTL_PORT_REG(i, TAG_INSERT)) == 2 || i == dev->cpu_port) | 
|  | port->flags = (1 << SWITCH_PORT_FLAG_TAGGED); | 
|  | val->len++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | struct rtl_priv *priv = to_rtl(dev); | 
|  | struct rtl_phyregs port; | 
|  | int en = val->value.i; | 
|  | int i; | 
|  |  | 
|  | rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu); | 
|  | rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu); | 
|  | rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu); | 
|  | rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en); | 
|  | if (en) | 
|  | rtl_set(dev, RTL_REG_VLAN_FILTER, en); | 
|  |  | 
|  | for (i = 0; i < RTL8306_NUM_PORTS; i++) { | 
|  | if (i > 3) | 
|  | rtl_phy_save(dev, val->port_vlan, &port); | 
|  | rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1); | 
|  | rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), (en ? (i == dev->cpu_port ? 0 : 1) : 1)); | 
|  | rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? (i == dev->cpu_port ? 2 : 1) : 3)); | 
|  | if (i > 3) | 
|  | rtl_phy_restore(dev, val->port_vlan, &port); | 
|  | } | 
|  | rtl_set(dev, RTL_REG_VLAN_ENABLE, en); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) | 
|  | { | 
|  | val->value.i = rtl_get(dev, RTL_REG_VLAN_ENABLE); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl_set_ports(struct switch_dev *dev, struct switch_val *val) | 
|  | { | 
|  | unsigned int mask = 0; | 
|  | unsigned int oldmask; | 
|  | int i; | 
|  |  | 
|  | for(i = 0; i < val->len; i++) | 
|  | { | 
|  | struct switch_port *port = &val->value.ports[i]; | 
|  | bool tagged = false; | 
|  |  | 
|  | mask |= (1 << port->id); | 
|  |  | 
|  | if (port->id == dev->cpu_port) | 
|  | continue; | 
|  |  | 
|  | if ((i == dev->cpu_port) || | 
|  | (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED))) | 
|  | tagged = true; | 
|  |  | 
|  | /* fix up PVIDs for added ports */ | 
|  | if (!tagged) | 
|  | rtl_set(dev, RTL_PORT_REG(port->id, PVID), val->port_vlan); | 
|  |  | 
|  | rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1)); | 
|  | rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1)); | 
|  | rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1)); | 
|  | } | 
|  |  | 
|  | oldmask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK)); | 
|  | rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask); | 
|  |  | 
|  | /* fix up PVIDs for removed ports, default to last vlan */ | 
|  | oldmask &= ~mask; | 
|  | for (i = 0; i < RTL8306_NUM_PORTS; i++) { | 
|  | if (!(oldmask & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | if (i == dev->cpu_port) | 
|  | continue; | 
|  |  | 
|  | if (rtl_get(dev, RTL_PORT_REG(i, PVID)) == val->port_vlan) | 
|  | rtl_set(dev, RTL_PORT_REG(i, PVID), dev->vlans - 1); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct switch_attr rtl_globals[] = { | 
|  | { | 
|  | .type = SWITCH_TYPE_INT, | 
|  | .name = "enable_vlan", | 
|  | .description = "Enable VLAN mode", | 
|  | .max = 1, | 
|  | .set = rtl_set_vlan, | 
|  | .get = rtl_get_vlan, | 
|  | }, | 
|  | { | 
|  | RTL_GLOBAL_REGATTR(EN_TRUNK), | 
|  | .name = "trunk", | 
|  | .description = "Enable port trunking", | 
|  | .max = 1, | 
|  | }, | 
|  | { | 
|  | RTL_GLOBAL_REGATTR(TRUNK_PORTSEL), | 
|  | .name = "trunk_sel", | 
|  | .description = "Select ports for trunking (0: 0,1 - 1: 3,4)", | 
|  | .max = 1, | 
|  | }, | 
|  | #ifdef DEBUG | 
|  | { | 
|  | RTL_GLOBAL_REGATTR(VLAN_FILTER), | 
|  | .name = "vlan_filter", | 
|  | .description = "Filter incoming packets for allowed VLANS", | 
|  | .max = 1, | 
|  | }, | 
|  | { | 
|  | .type = SWITCH_TYPE_INT, | 
|  | .name = "cpuport", | 
|  | .description = "CPU Port", | 
|  | .set = rtl_set_cpuport, | 
|  | .get = rtl_get_cpuport, | 
|  | .max = RTL8306_NUM_PORTS, | 
|  | }, | 
|  | { | 
|  | .type = SWITCH_TYPE_INT, | 
|  | .name = "use_cpuport", | 
|  | .description = "CPU Port handling flag", | 
|  | .set = rtl_set_use_cpuport, | 
|  | .get = rtl_get_use_cpuport, | 
|  | .max = RTL8306_NUM_PORTS, | 
|  | }, | 
|  | { | 
|  | RTL_GLOBAL_REGATTR(TRAP_CPU), | 
|  | .name = "trap_cpu", | 
|  | .description = "VLAN trap to CPU", | 
|  | .max = 1, | 
|  | }, | 
|  | { | 
|  | RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE), | 
|  | .name = "vlan_tag_aware", | 
|  | .description = "Enable VLAN tag awareness", | 
|  | .max = 1, | 
|  | }, | 
|  | { | 
|  | RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY), | 
|  | .name = "tag_only", | 
|  | .description = "Only accept tagged packets", | 
|  | .max = 1, | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  | static struct switch_attr rtl_port[] = { | 
|  | { | 
|  | RTL_PORT_REGATTR(PVID), | 
|  | .name = "pvid", | 
|  | .description = "Port VLAN ID", | 
|  | .max = RTL8306_NUM_VLANS - 1, | 
|  | }, | 
|  | #ifdef DEBUG | 
|  | { | 
|  | RTL_PORT_REGATTR(NULL_VID_REPLACE), | 
|  | .name = "null_vid", | 
|  | .description = "NULL VID gets replaced by port default vid", | 
|  | .max = 1, | 
|  | }, | 
|  | { | 
|  | RTL_PORT_REGATTR(NON_PVID_DISCARD), | 
|  | .name = "non_pvid_discard", | 
|  | .description = "discard packets with VID != PVID", | 
|  | .max = 1, | 
|  | }, | 
|  | { | 
|  | RTL_PORT_REGATTR(VID_INSERT), | 
|  | .name = "vid_insert_remove", | 
|  | .description = "how should the switch insert and remove vids ?", | 
|  | .max = 3, | 
|  | }, | 
|  | { | 
|  | RTL_PORT_REGATTR(TAG_INSERT), | 
|  | .name = "tag_insert", | 
|  | .description = "tag insertion handling", | 
|  | .max = 3, | 
|  | }, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static struct switch_attr rtl_vlan[] = { | 
|  | { | 
|  | RTL_VLAN_REGATTR(VID), | 
|  | .name = "vid", | 
|  | .description = "VLAN ID (1-4095)", | 
|  | .max = 4095, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct switch_dev_ops rtl8306_ops = { | 
|  | .attr_global = { | 
|  | .attr = rtl_globals, | 
|  | .n_attr = ARRAY_SIZE(rtl_globals), | 
|  | }, | 
|  | .attr_port = { | 
|  | .attr = rtl_port, | 
|  | .n_attr = ARRAY_SIZE(rtl_port), | 
|  | }, | 
|  | .attr_vlan = { | 
|  | .attr = rtl_vlan, | 
|  | .n_attr = ARRAY_SIZE(rtl_vlan), | 
|  | }, | 
|  |  | 
|  | .get_vlan_ports = rtl_get_ports, | 
|  | .set_vlan_ports = rtl_set_ports, | 
|  | .apply_config = rtl_hw_apply, | 
|  | .reset_switch = rtl_reset, | 
|  | .get_port_link = rtl_get_port_link, | 
|  | }; | 
|  |  | 
|  | static int | 
|  | rtl8306_config_init(struct phy_device *pdev) | 
|  | { | 
|  | struct net_device *netdev = pdev->attached_dev; | 
|  | struct rtl_priv *priv = pdev->priv; | 
|  | struct switch_dev *dev = &priv->dev; | 
|  | struct switch_val val; | 
|  | unsigned int chipid, chipver, chiptype; | 
|  | int err; | 
|  |  | 
|  | /* Only init the switch for the primary PHY */ | 
|  | if (pdev->mdio.addr != 0) | 
|  | return 0; | 
|  |  | 
|  | val.value.i = 1; | 
|  | priv->dev.cpu_port = RTL8306_PORT_CPU; | 
|  | priv->dev.ports = RTL8306_NUM_PORTS; | 
|  | priv->dev.vlans = RTL8306_NUM_VLANS; | 
|  | priv->dev.ops = &rtl8306_ops; | 
|  | priv->do_cpu = 0; | 
|  | priv->page = -1; | 
|  | priv->bus = pdev->mdio.bus; | 
|  |  | 
|  | chipid = rtl_get(dev, RTL_REG_CHIPID); | 
|  | chipver = rtl_get(dev, RTL_REG_CHIPVER); | 
|  | chiptype = rtl_get(dev, RTL_REG_CHIPTYPE); | 
|  | switch(chiptype) { | 
|  | case 0: | 
|  | case 2: | 
|  | strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname)); | 
|  | priv->type = RTL_TYPE_S; | 
|  | break; | 
|  | case 1: | 
|  | strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname)); | 
|  | priv->type = RTL_TYPE_SD; | 
|  | break; | 
|  | case 3: | 
|  | strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname)); | 
|  | priv->type = RTL_TYPE_SDM; | 
|  | break; | 
|  | default: | 
|  | strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | dev->name = priv->hwname; | 
|  | rtl_hw_init(dev); | 
|  |  | 
|  | printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver); | 
|  |  | 
|  | err = register_switch(dev, netdev); | 
|  | if (err < 0) { | 
|  | kfree(priv); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | rtl8306_fixup(struct phy_device *pdev) | 
|  | { | 
|  | struct rtl_priv priv; | 
|  | u16 chipid; | 
|  |  | 
|  | /* Attach to primary LAN port and WAN port */ | 
|  | if (pdev->mdio.addr != 0 && pdev->mdio.addr != 4) | 
|  | return 0; | 
|  |  | 
|  | memset(&priv, 0, sizeof(priv)); | 
|  | priv.fixup = true; | 
|  | priv.page = -1; | 
|  | priv.bus = pdev->mdio.bus; | 
|  | chipid = rtl_get(&priv.dev, RTL_REG_CHIPID); | 
|  | if (chipid == 0x5988) | 
|  | pdev->phy_id = RTL8306_MAGIC; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl8306_probe(struct phy_device *pdev) | 
|  | { | 
|  | struct rtl_priv *priv; | 
|  |  | 
|  | list_for_each_entry(priv, &phydevs, list) { | 
|  | /* | 
|  | * share one rtl_priv instance between virtual phy | 
|  | * devices on the same bus | 
|  | */ | 
|  | if (priv->bus == pdev->mdio.bus) | 
|  | goto found; | 
|  | } | 
|  | priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | priv->bus = pdev->mdio.bus; | 
|  |  | 
|  | found: | 
|  | pdev->priv = priv; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | rtl8306_remove(struct phy_device *pdev) | 
|  | { | 
|  | struct rtl_priv *priv = pdev->priv; | 
|  | unregister_switch(&priv->dev); | 
|  | kfree(priv); | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl8306_config_aneg(struct phy_device *pdev) | 
|  | { | 
|  | struct rtl_priv *priv = pdev->priv; | 
|  |  | 
|  | /* Only for WAN */ | 
|  | if (pdev->mdio.addr == 0) | 
|  | return 0; | 
|  |  | 
|  | /* Restart autonegotiation */ | 
|  | rtl_set(&priv->dev, RTL_PORT_REG(4, NWAY), 1); | 
|  | rtl_set(&priv->dev, RTL_PORT_REG(4, NRESTART), 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rtl8306_read_status(struct phy_device *pdev) | 
|  | { | 
|  | struct rtl_priv *priv = pdev->priv; | 
|  | struct switch_dev *dev = &priv->dev; | 
|  |  | 
|  | if (pdev->mdio.addr == 4) { | 
|  | /* WAN */ | 
|  | pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10; | 
|  | pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF; | 
|  | pdev->link = !!rtl_get(dev, RTL_PORT_REG(4, LINK)); | 
|  | } else { | 
|  | /* LAN */ | 
|  | pdev->speed = SPEED_100; | 
|  | pdev->duplex = DUPLEX_FULL; | 
|  | pdev->link = 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Bypass generic PHY status read, | 
|  | * it doesn't work with this switch | 
|  | */ | 
|  | if (pdev->link) { | 
|  | pdev->state = PHY_RUNNING; | 
|  | netif_carrier_on(pdev->attached_dev); | 
|  | pdev->adjust_link(pdev->attached_dev); | 
|  | } else { | 
|  | pdev->state = PHY_NOLINK; | 
|  | netif_carrier_off(pdev->attached_dev); | 
|  | pdev->adjust_link(pdev->attached_dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct phy_driver rtl8306_driver = { | 
|  | .name		= "Realtek RTL8306S", | 
|  | #if (LINUX_VERSION_CODE < KERNEL_VERSION(4,13,0)) | 
|  | .flags		= PHY_HAS_MAGICANEG, | 
|  | #endif | 
|  | .phy_id		= RTL8306_MAGIC, | 
|  | .phy_id_mask	= 0xffffffff, | 
|  | .features	= PHY_BASIC_FEATURES, | 
|  | .probe		= &rtl8306_probe, | 
|  | .remove		= &rtl8306_remove, | 
|  | .config_init	= &rtl8306_config_init, | 
|  | .config_aneg	= &rtl8306_config_aneg, | 
|  | .read_status	= &rtl8306_read_status, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | rtl_init(void) | 
|  | { | 
|  | phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup); | 
|  | return phy_driver_register(&rtl8306_driver, THIS_MODULE); | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | rtl_exit(void) | 
|  | { | 
|  | phy_driver_unregister(&rtl8306_driver); | 
|  | } | 
|  |  | 
|  | module_init(rtl_init); | 
|  | module_exit(rtl_exit); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  |