|  | /* | 
|  | * Atmel AT91 SAM9 & SAMA5 SoCs reset code | 
|  | * | 
|  | * Copyright (C) 2007 Atmel Corporation. | 
|  | * Copyright (C) BitBox Ltd 2010 | 
|  | * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> | 
|  | * Copyright (C) 2014 Free Electrons | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public | 
|  | * License version 2.  This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/reboot.h> | 
|  |  | 
|  | #include <soc/at91/at91sam9_ddrsdr.h> | 
|  | #include <soc/at91/at91sam9_sdramc.h> | 
|  |  | 
|  | #define AT91_RSTC_CR	0x00		/* Reset Controller Control Register */ | 
|  | #define AT91_RSTC_PROCRST	BIT(0)		/* Processor Reset */ | 
|  | #define AT91_RSTC_PERRST	BIT(2)		/* Peripheral Reset */ | 
|  | #define AT91_RSTC_EXTRST	BIT(3)		/* External Reset */ | 
|  | #define AT91_RSTC_KEY		(0xa5 << 24)	/* KEY Password */ | 
|  |  | 
|  | #define AT91_RSTC_SR	0x04		/* Reset Controller Status Register */ | 
|  | #define AT91_RSTC_URSTS		BIT(0)		/* User Reset Status */ | 
|  | #define AT91_RSTC_RSTTYP	GENMASK(10, 8)	/* Reset Type */ | 
|  | #define AT91_RSTC_NRSTL		BIT(16)		/* NRST Pin Level */ | 
|  | #define AT91_RSTC_SRCMP		BIT(17)		/* Software Reset Command in Progress */ | 
|  |  | 
|  | #define AT91_RSTC_MR	0x08		/* Reset Controller Mode Register */ | 
|  | #define AT91_RSTC_URSTEN	BIT(0)		/* User Reset Enable */ | 
|  | #define AT91_RSTC_URSTIEN	BIT(4)		/* User Reset Interrupt Enable */ | 
|  | #define AT91_RSTC_ERSTL		GENMASK(11, 8)	/* External Reset Length */ | 
|  |  | 
|  | enum reset_type { | 
|  | RESET_TYPE_GENERAL	= 0, | 
|  | RESET_TYPE_WAKEUP	= 1, | 
|  | RESET_TYPE_WATCHDOG	= 2, | 
|  | RESET_TYPE_SOFTWARE	= 3, | 
|  | RESET_TYPE_USER		= 4, | 
|  | }; | 
|  |  | 
|  | static void __iomem *at91_ramc_base[2], *at91_rstc_base; | 
|  | static struct clk *sclk; | 
|  |  | 
|  | /* | 
|  | * unless the SDRAM is cleanly shutdown before we hit the | 
|  | * reset register it can be left driving the data bus and | 
|  | * killing the chance of a subsequent boot from NAND | 
|  | */ | 
|  | static int at91sam9260_restart(struct notifier_block *this, unsigned long mode, | 
|  | void *cmd) | 
|  | { | 
|  | asm volatile( | 
|  | /* Align to cache lines */ | 
|  | ".balign 32\n\t" | 
|  |  | 
|  | /* Disable SDRAM accesses */ | 
|  | "str	%2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t" | 
|  |  | 
|  | /* Power down SDRAM */ | 
|  | "str	%3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t" | 
|  |  | 
|  | /* Reset CPU */ | 
|  | "str	%4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t" | 
|  |  | 
|  | "b	.\n\t" | 
|  | : | 
|  | : "r" (at91_ramc_base[0]), | 
|  | "r" (at91_rstc_base), | 
|  | "r" (1), | 
|  | "r" cpu_to_le32(AT91_SDRAMC_LPCB_POWER_DOWN), | 
|  | "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode, | 
|  | void *cmd) | 
|  | { | 
|  | asm volatile( | 
|  | /* | 
|  | * Test wether we have a second RAM controller to care | 
|  | * about. | 
|  | * | 
|  | * First, test that we can dereference the virtual address. | 
|  | */ | 
|  | "cmp	%1, #0\n\t" | 
|  | "beq	1f\n\t" | 
|  |  | 
|  | /* Then, test that the RAM controller is enabled */ | 
|  | "ldr	r0, [%1]\n\t" | 
|  | "cmp	r0, #0\n\t" | 
|  |  | 
|  | /* Align to cache lines */ | 
|  | ".balign 32\n\t" | 
|  |  | 
|  | /* Disable SDRAM0 accesses */ | 
|  | "1:	str	%3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" | 
|  | /* Power down SDRAM0 */ | 
|  | "	str	%4, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" | 
|  | /* Disable SDRAM1 accesses */ | 
|  | "	strne	%3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t" | 
|  | /* Power down SDRAM1 */ | 
|  | "	strne	%4, [%1, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" | 
|  | /* Reset CPU */ | 
|  | "	str	%5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t" | 
|  |  | 
|  | "	b	.\n\t" | 
|  | : | 
|  | : "r" (at91_ramc_base[0]), | 
|  | "r" (at91_ramc_base[1]), | 
|  | "r" (at91_rstc_base), | 
|  | "r" (1), | 
|  | "r" cpu_to_le32(AT91_DDRSDRC_LPCB_POWER_DOWN), | 
|  | "r" cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST) | 
|  | : "r0"); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int sama5d3_restart(struct notifier_block *this, unsigned long mode, | 
|  | void *cmd) | 
|  | { | 
|  | writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST), | 
|  | at91_rstc_base); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int samx7_restart(struct notifier_block *this, unsigned long mode, | 
|  | void *cmd) | 
|  | { | 
|  | writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST), | 
|  | at91_rstc_base); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static void __init at91_reset_status(struct platform_device *pdev) | 
|  | { | 
|  | const char *reason; | 
|  | u32 reg = readl(at91_rstc_base + AT91_RSTC_SR); | 
|  |  | 
|  | switch ((reg & AT91_RSTC_RSTTYP) >> 8) { | 
|  | case RESET_TYPE_GENERAL: | 
|  | reason = "general reset"; | 
|  | break; | 
|  | case RESET_TYPE_WAKEUP: | 
|  | reason = "wakeup"; | 
|  | break; | 
|  | case RESET_TYPE_WATCHDOG: | 
|  | reason = "watchdog reset"; | 
|  | break; | 
|  | case RESET_TYPE_SOFTWARE: | 
|  | reason = "software reset"; | 
|  | break; | 
|  | case RESET_TYPE_USER: | 
|  | reason = "user reset"; | 
|  | break; | 
|  | default: | 
|  | reason = "unknown reset"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | dev_info(&pdev->dev, "Starting after %s\n", reason); | 
|  | } | 
|  |  | 
|  | static const struct of_device_id at91_ramc_of_match[] = { | 
|  | { .compatible = "atmel,at91sam9260-sdramc", }, | 
|  | { .compatible = "atmel,at91sam9g45-ddramc", }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id at91_reset_of_match[] = { | 
|  | { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart }, | 
|  | { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, | 
|  | { .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart }, | 
|  | { .compatible = "atmel,samx7-rstc", .data = samx7_restart }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, at91_reset_of_match); | 
|  |  | 
|  | static struct notifier_block at91_restart_nb = { | 
|  | .priority = 192, | 
|  | }; | 
|  |  | 
|  | static int __init at91_reset_probe(struct platform_device *pdev) | 
|  | { | 
|  | const struct of_device_id *match; | 
|  | struct device_node *np; | 
|  | int ret, idx = 0; | 
|  |  | 
|  | at91_rstc_base = of_iomap(pdev->dev.of_node, 0); | 
|  | if (!at91_rstc_base) { | 
|  | dev_err(&pdev->dev, "Could not map reset controller address\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!of_device_is_compatible(pdev->dev.of_node, "atmel,sama5d3-rstc")) { | 
|  | /* we need to shutdown the ddr controller, so get ramc base */ | 
|  | for_each_matching_node(np, at91_ramc_of_match) { | 
|  | at91_ramc_base[idx] = of_iomap(np, 0); | 
|  | if (!at91_ramc_base[idx]) { | 
|  | dev_err(&pdev->dev, "Could not map ram controller address\n"); | 
|  | of_node_put(np); | 
|  | return -ENODEV; | 
|  | } | 
|  | idx++; | 
|  | } | 
|  | } | 
|  |  | 
|  | match = of_match_node(at91_reset_of_match, pdev->dev.of_node); | 
|  | at91_restart_nb.notifier_call = match->data; | 
|  |  | 
|  | sclk = devm_clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(sclk)) | 
|  | return PTR_ERR(sclk); | 
|  |  | 
|  | ret = clk_prepare_enable(sclk); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "Could not enable slow clock\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = register_restart_handler(&at91_restart_nb); | 
|  | if (ret) { | 
|  | clk_disable_unprepare(sclk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | at91_reset_status(pdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __exit at91_reset_remove(struct platform_device *pdev) | 
|  | { | 
|  | unregister_restart_handler(&at91_restart_nb); | 
|  | clk_disable_unprepare(sclk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver at91_reset_driver = { | 
|  | .remove = __exit_p(at91_reset_remove), | 
|  | .driver = { | 
|  | .name = "at91-reset", | 
|  | .of_match_table = at91_reset_of_match, | 
|  | }, | 
|  | }; | 
|  | module_platform_driver_probe(at91_reset_driver, at91_reset_probe); | 
|  |  | 
|  | MODULE_AUTHOR("Atmel Corporation"); | 
|  | MODULE_DESCRIPTION("Reset driver for Atmel SoCs"); | 
|  | MODULE_LICENSE("GPL v2"); |