|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Gemini power management controller | 
|  | * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> | 
|  | * | 
|  | * Inspired by code from the SL3516 board support by Jason Lee | 
|  | * Inspired by code from Janos Laube <janos.dev@gmail.com> | 
|  | */ | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/reboot.h> | 
|  |  | 
|  | #define GEMINI_PWC_ID		0x00010500 | 
|  | #define	GEMINI_PWC_IDREG	0x00 | 
|  | #define	GEMINI_PWC_CTRLREG	0x04 | 
|  | #define	GEMINI_PWC_STATREG	0x08 | 
|  |  | 
|  | #define GEMINI_CTRL_SHUTDOWN	BIT(0) | 
|  | #define GEMINI_CTRL_ENABLE	BIT(1) | 
|  | #define GEMINI_CTRL_IRQ_CLR	BIT(2) | 
|  |  | 
|  | #define GEMINI_STAT_CIR		BIT(4) | 
|  | #define	GEMINI_STAT_RTC		BIT(5) | 
|  | #define	GEMINI_STAT_POWERBUTTON	BIT(6) | 
|  |  | 
|  | struct gemini_powercon { | 
|  | struct device           *dev; | 
|  | void __iomem            *base; | 
|  | }; | 
|  |  | 
|  | static irqreturn_t gemini_powerbutton_interrupt(int irq, void *data) | 
|  | { | 
|  | struct gemini_powercon *gpw = data; | 
|  | u32 val; | 
|  |  | 
|  | /* ACK the IRQ */ | 
|  | val = readl(gpw->base + GEMINI_PWC_CTRLREG); | 
|  | val |= GEMINI_CTRL_IRQ_CLR; | 
|  | writel(val, gpw->base + GEMINI_PWC_CTRLREG); | 
|  |  | 
|  | val = readl(gpw->base + GEMINI_PWC_STATREG); | 
|  | val &= 0x70U; | 
|  | switch (val) { | 
|  | case GEMINI_STAT_CIR: | 
|  | /* | 
|  | * We do not yet have a driver for the infrared | 
|  | * controller so it can cause spurious poweroff | 
|  | * events. Ignore those for now. | 
|  | */ | 
|  | dev_info(gpw->dev, "infrared poweroff - ignored\n"); | 
|  | break; | 
|  | case GEMINI_STAT_RTC: | 
|  | dev_info(gpw->dev, "RTC poweroff\n"); | 
|  | orderly_poweroff(true); | 
|  | break; | 
|  | case GEMINI_STAT_POWERBUTTON: | 
|  | dev_info(gpw->dev, "poweroff button pressed\n"); | 
|  | orderly_poweroff(true); | 
|  | break; | 
|  | default: | 
|  | dev_info(gpw->dev, "other power management IRQ\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* This callback needs this static local as it has void as argument */ | 
|  | static struct gemini_powercon *gpw_poweroff; | 
|  |  | 
|  | static void gemini_poweroff(void) | 
|  | { | 
|  | struct gemini_powercon *gpw = gpw_poweroff; | 
|  | u32 val; | 
|  |  | 
|  | dev_crit(gpw->dev, "Gemini power off\n"); | 
|  | val = readl(gpw->base + GEMINI_PWC_CTRLREG); | 
|  | val |= GEMINI_CTRL_ENABLE | GEMINI_CTRL_IRQ_CLR; | 
|  | writel(val, gpw->base + GEMINI_PWC_CTRLREG); | 
|  |  | 
|  | val &= ~GEMINI_CTRL_ENABLE; | 
|  | val |= GEMINI_CTRL_SHUTDOWN; | 
|  | writel(val, gpw->base + GEMINI_PWC_CTRLREG); | 
|  | } | 
|  |  | 
|  | static int gemini_poweroff_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct resource *res; | 
|  | struct gemini_powercon *gpw; | 
|  | u32 val; | 
|  | int irq; | 
|  | int ret; | 
|  |  | 
|  | gpw = devm_kzalloc(dev, sizeof(*gpw), GFP_KERNEL); | 
|  | if (!gpw) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | gpw->base = devm_ioremap_resource(dev, res); | 
|  | if (IS_ERR(gpw->base)) | 
|  | return PTR_ERR(gpw->base); | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (!irq) | 
|  | return -EINVAL; | 
|  |  | 
|  | gpw->dev = dev; | 
|  |  | 
|  | val = readl(gpw->base + GEMINI_PWC_IDREG); | 
|  | val &= 0xFFFFFF00U; | 
|  | if (val != GEMINI_PWC_ID) { | 
|  | dev_err(dev, "wrong power controller ID: %08x\n", | 
|  | val); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable the power controller. This is crucial on Gemini | 
|  | * systems: if this is not done, pressing the power button | 
|  | * will result in unconditional poweroff without any warning. | 
|  | * This makes the kernel handle the poweroff. | 
|  | */ | 
|  | val = readl(gpw->base + GEMINI_PWC_CTRLREG); | 
|  | val |= GEMINI_CTRL_ENABLE; | 
|  | writel(val, gpw->base + GEMINI_PWC_CTRLREG); | 
|  |  | 
|  | /* Clear the IRQ */ | 
|  | val = readl(gpw->base + GEMINI_PWC_CTRLREG); | 
|  | val |= GEMINI_CTRL_IRQ_CLR; | 
|  | writel(val, gpw->base + GEMINI_PWC_CTRLREG); | 
|  |  | 
|  | /* Wait for this to clear */ | 
|  | val = readl(gpw->base + GEMINI_PWC_STATREG); | 
|  | while (val & 0x70U) | 
|  | val = readl(gpw->base + GEMINI_PWC_STATREG); | 
|  |  | 
|  | /* Clear the IRQ again */ | 
|  | val = readl(gpw->base + GEMINI_PWC_CTRLREG); | 
|  | val |= GEMINI_CTRL_IRQ_CLR; | 
|  | writel(val, gpw->base + GEMINI_PWC_CTRLREG); | 
|  |  | 
|  | ret = devm_request_irq(dev, irq, gemini_powerbutton_interrupt, 0, | 
|  | "poweroff", gpw); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | pm_power_off = gemini_poweroff; | 
|  | gpw_poweroff = gpw; | 
|  |  | 
|  | dev_info(dev, "Gemini poweroff driver registered\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id gemini_poweroff_of_match[] = { | 
|  | { | 
|  | .compatible = "cortina,gemini-power-controller", | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static struct platform_driver gemini_poweroff_driver = { | 
|  | .probe = gemini_poweroff_probe, | 
|  | .driver = { | 
|  | .name = "gemini-poweroff", | 
|  | .of_match_table = gemini_poweroff_of_match, | 
|  | }, | 
|  | }; | 
|  | builtin_platform_driver(gemini_poweroff_driver); |