|  | /* | 
|  | *  linux/drivers/cpufreq/cpufreq.c | 
|  | * | 
|  | *  Copyright (C) 2001 Russell King | 
|  | *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> | 
|  | *            (C) 2013 Viresh Kumar <viresh.kumar@linaro.org> | 
|  | * | 
|  | *  Oct 2005 - Ashok Raj <ashok.raj@intel.com> | 
|  | *	Added handling for CPU hotplug | 
|  | *  Feb 2006 - Jacob Shin <jacob.shin@amd.com> | 
|  | *	Fix handling for CPU hotplug -- affected CPUs | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/cpufreq_times.h> | 
|  | #include <linux/cpu_cooling.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel_stat.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/suspend.h> | 
|  | #include <linux/syscore_ops.h> | 
|  | #include <linux/tick.h> | 
|  | #include <trace/events/power.h> | 
|  |  | 
|  | static LIST_HEAD(cpufreq_policy_list); | 
|  |  | 
|  | static inline bool policy_is_inactive(struct cpufreq_policy *policy) | 
|  | { | 
|  | return cpumask_empty(policy->cpus); | 
|  | } | 
|  |  | 
|  | /* Macros to iterate over CPU policies */ | 
|  | #define for_each_suitable_policy(__policy, __active)			 \ | 
|  | list_for_each_entry(__policy, &cpufreq_policy_list, policy_list) \ | 
|  | if ((__active) == !policy_is_inactive(__policy)) | 
|  |  | 
|  | #define for_each_active_policy(__policy)		\ | 
|  | for_each_suitable_policy(__policy, true) | 
|  | #define for_each_inactive_policy(__policy)		\ | 
|  | for_each_suitable_policy(__policy, false) | 
|  |  | 
|  | #define for_each_policy(__policy)			\ | 
|  | list_for_each_entry(__policy, &cpufreq_policy_list, policy_list) | 
|  |  | 
|  | /* Iterate over governors */ | 
|  | static LIST_HEAD(cpufreq_governor_list); | 
|  | #define for_each_governor(__governor)				\ | 
|  | list_for_each_entry(__governor, &cpufreq_governor_list, governor_list) | 
|  |  | 
|  | /** | 
|  | * The "cpufreq driver" - the arch- or hardware-dependent low | 
|  | * level driver of CPUFreq support, and its spinlock. This lock | 
|  | * also protects the cpufreq_cpu_data array. | 
|  | */ | 
|  | static struct cpufreq_driver *cpufreq_driver; | 
|  | static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); | 
|  | static DEFINE_RWLOCK(cpufreq_driver_lock); | 
|  |  | 
|  | /* Flag to suspend/resume CPUFreq governors */ | 
|  | static bool cpufreq_suspended; | 
|  |  | 
|  | static inline bool has_target(void) | 
|  | { | 
|  | return cpufreq_driver->target_index || cpufreq_driver->target; | 
|  | } | 
|  |  | 
|  | /* internal prototypes */ | 
|  | static unsigned int __cpufreq_get(struct cpufreq_policy *policy); | 
|  | static int cpufreq_init_governor(struct cpufreq_policy *policy); | 
|  | static void cpufreq_exit_governor(struct cpufreq_policy *policy); | 
|  | static int cpufreq_start_governor(struct cpufreq_policy *policy); | 
|  | static void cpufreq_stop_governor(struct cpufreq_policy *policy); | 
|  | static void cpufreq_governor_limits(struct cpufreq_policy *policy); | 
|  |  | 
|  | /** | 
|  | * Two notifier lists: the "policy" list is involved in the | 
|  | * validation process for a new CPU frequency policy; the | 
|  | * "transition" list for kernel code that needs to handle | 
|  | * changes to devices when the CPU clock speed changes. | 
|  | * The mutex locks both lists. | 
|  | */ | 
|  | static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list); | 
|  | SRCU_NOTIFIER_HEAD_STATIC(cpufreq_transition_notifier_list); | 
|  |  | 
|  | static int off __read_mostly; | 
|  | static int cpufreq_disabled(void) | 
|  | { | 
|  | return off; | 
|  | } | 
|  | void disable_cpufreq(void) | 
|  | { | 
|  | off = 1; | 
|  | } | 
|  | static DEFINE_MUTEX(cpufreq_governor_mutex); | 
|  |  | 
|  | bool have_governor_per_policy(void) | 
|  | { | 
|  | return !!(cpufreq_driver->flags & CPUFREQ_HAVE_GOVERNOR_PER_POLICY); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(have_governor_per_policy); | 
|  |  | 
|  | struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy) | 
|  | { | 
|  | if (have_governor_per_policy()) | 
|  | return &policy->kobj; | 
|  | else | 
|  | return cpufreq_global_kobject; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(get_governor_parent_kobj); | 
|  |  | 
|  | static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall) | 
|  | { | 
|  | u64 idle_time; | 
|  | u64 cur_wall_time; | 
|  | u64 busy_time; | 
|  |  | 
|  | cur_wall_time = jiffies64_to_nsecs(get_jiffies_64()); | 
|  |  | 
|  | busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER]; | 
|  | busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM]; | 
|  | busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ]; | 
|  | busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ]; | 
|  | busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL]; | 
|  | busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE]; | 
|  |  | 
|  | idle_time = cur_wall_time - busy_time; | 
|  | if (wall) | 
|  | *wall = div_u64(cur_wall_time, NSEC_PER_USEC); | 
|  |  | 
|  | return div_u64(idle_time, NSEC_PER_USEC); | 
|  | } | 
|  |  | 
|  | u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) | 
|  | { | 
|  | u64 idle_time = get_cpu_idle_time_us(cpu, io_busy ? wall : NULL); | 
|  |  | 
|  | if (idle_time == -1ULL) | 
|  | return get_cpu_idle_time_jiffy(cpu, wall); | 
|  | else if (!io_busy) | 
|  | idle_time += get_cpu_iowait_time_us(cpu, wall); | 
|  |  | 
|  | return idle_time; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(get_cpu_idle_time); | 
|  |  | 
|  | __weak void arch_set_freq_scale(struct cpumask *cpus, unsigned long cur_freq, | 
|  | unsigned long max_freq) | 
|  | { | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(arch_set_freq_scale); | 
|  |  | 
|  | __weak void arch_set_max_freq_scale(struct cpumask *cpus, | 
|  | unsigned long policy_max_freq) | 
|  | { | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(arch_set_max_freq_scale); | 
|  |  | 
|  | /* | 
|  | * This is a generic cpufreq init() routine which can be used by cpufreq | 
|  | * drivers of SMP systems. It will do following: | 
|  | * - validate & show freq table passed | 
|  | * - set policies transition latency | 
|  | * - policy->cpus with all possible CPUs | 
|  | */ | 
|  | int cpufreq_generic_init(struct cpufreq_policy *policy, | 
|  | struct cpufreq_frequency_table *table, | 
|  | unsigned int transition_latency) | 
|  | { | 
|  | policy->freq_table = table; | 
|  | policy->cpuinfo.transition_latency = transition_latency; | 
|  |  | 
|  | /* | 
|  | * The driver only supports the SMP configuration where all processors | 
|  | * share the clock and voltage and clock. | 
|  | */ | 
|  | cpumask_setall(policy->cpus); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_generic_init); | 
|  |  | 
|  | struct cpufreq_policy *cpufreq_cpu_get_raw(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); | 
|  |  | 
|  | return policy && cpumask_test_cpu(cpu, policy->cpus) ? policy : NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_cpu_get_raw); | 
|  |  | 
|  | unsigned int cpufreq_generic_get(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); | 
|  |  | 
|  | if (!policy || IS_ERR(policy->clk)) { | 
|  | pr_err("%s: No %s associated to cpu: %d\n", | 
|  | __func__, policy ? "clk" : "policy", cpu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return clk_get_rate(policy->clk) / 1000; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_generic_get); | 
|  |  | 
|  | /** | 
|  | * cpufreq_cpu_get: returns policy for a cpu and marks it busy. | 
|  | * | 
|  | * @cpu: cpu to find policy for. | 
|  | * | 
|  | * This returns policy for 'cpu', returns NULL if it doesn't exist. | 
|  | * It also increments the kobject reference count to mark it busy and so would | 
|  | * require a corresponding call to cpufreq_cpu_put() to decrement it back. | 
|  | * If corresponding call cpufreq_cpu_put() isn't made, the policy wouldn't be | 
|  | * freed as that depends on the kobj count. | 
|  | * | 
|  | * Return: A valid policy on success, otherwise NULL on failure. | 
|  | */ | 
|  | struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy = NULL; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (WARN_ON(cpu >= nr_cpu_ids)) | 
|  | return NULL; | 
|  |  | 
|  | /* get the cpufreq driver */ | 
|  | read_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | if (cpufreq_driver) { | 
|  | /* get the CPU */ | 
|  | policy = cpufreq_cpu_get_raw(cpu); | 
|  | if (policy) | 
|  | kobject_get(&policy->kobj); | 
|  | } | 
|  |  | 
|  | read_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | return policy; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_cpu_get); | 
|  |  | 
|  | /** | 
|  | * cpufreq_cpu_put: Decrements the usage count of a policy | 
|  | * | 
|  | * @policy: policy earlier returned by cpufreq_cpu_get(). | 
|  | * | 
|  | * This decrements the kobject reference count incremented earlier by calling | 
|  | * cpufreq_cpu_get(). | 
|  | */ | 
|  | void cpufreq_cpu_put(struct cpufreq_policy *policy) | 
|  | { | 
|  | kobject_put(&policy->kobj); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_cpu_put); | 
|  |  | 
|  | /********************************************************************* | 
|  | *            EXTERNALLY AFFECTING FREQUENCY CHANGES                 * | 
|  | *********************************************************************/ | 
|  |  | 
|  | /** | 
|  | * adjust_jiffies - adjust the system "loops_per_jiffy" | 
|  | * | 
|  | * This function alters the system "loops_per_jiffy" for the clock | 
|  | * speed change. Note that loops_per_jiffy cannot be updated on SMP | 
|  | * systems as each CPU might be scaled differently. So, use the arch | 
|  | * per-CPU loops_per_jiffy value wherever possible. | 
|  | */ | 
|  | static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) | 
|  | { | 
|  | #ifndef CONFIG_SMP | 
|  | static unsigned long l_p_j_ref; | 
|  | static unsigned int l_p_j_ref_freq; | 
|  |  | 
|  | if (ci->flags & CPUFREQ_CONST_LOOPS) | 
|  | return; | 
|  |  | 
|  | if (!l_p_j_ref_freq) { | 
|  | l_p_j_ref = loops_per_jiffy; | 
|  | l_p_j_ref_freq = ci->old; | 
|  | pr_debug("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n", | 
|  | l_p_j_ref, l_p_j_ref_freq); | 
|  | } | 
|  | if (val == CPUFREQ_POSTCHANGE && ci->old != ci->new) { | 
|  | loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, | 
|  | ci->new); | 
|  | pr_debug("scaling loops_per_jiffy to %lu for frequency %u kHz\n", | 
|  | loops_per_jiffy, ci->new); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_notify_transition - Notify frequency transition and adjust_jiffies. | 
|  | * @policy: cpufreq policy to enable fast frequency switching for. | 
|  | * @freqs: contain details of the frequency update. | 
|  | * @state: set to CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE. | 
|  | * | 
|  | * This function calls the transition notifiers and the "adjust_jiffies" | 
|  | * function. It is called twice on all CPU frequency changes that have | 
|  | * external effects. | 
|  | */ | 
|  | static void cpufreq_notify_transition(struct cpufreq_policy *policy, | 
|  | struct cpufreq_freqs *freqs, | 
|  | unsigned int state) | 
|  | { | 
|  | BUG_ON(irqs_disabled()); | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return; | 
|  |  | 
|  | freqs->flags = cpufreq_driver->flags; | 
|  | pr_debug("notification %u of frequency transition to %u kHz\n", | 
|  | state, freqs->new); | 
|  |  | 
|  | switch (state) { | 
|  | case CPUFREQ_PRECHANGE: | 
|  | /* | 
|  | * Detect if the driver reported a value as "old frequency" | 
|  | * which is not equal to what the cpufreq core thinks is | 
|  | * "old frequency". | 
|  | */ | 
|  | if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) { | 
|  | if (policy->cur && (policy->cur != freqs->old)) { | 
|  | pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n", | 
|  | freqs->old, policy->cur); | 
|  | freqs->old = policy->cur; | 
|  | } | 
|  | } | 
|  |  | 
|  | for_each_cpu(freqs->cpu, policy->cpus) { | 
|  | srcu_notifier_call_chain(&cpufreq_transition_notifier_list, | 
|  | CPUFREQ_PRECHANGE, freqs); | 
|  | } | 
|  |  | 
|  | adjust_jiffies(CPUFREQ_PRECHANGE, freqs); | 
|  | break; | 
|  |  | 
|  | case CPUFREQ_POSTCHANGE: | 
|  | adjust_jiffies(CPUFREQ_POSTCHANGE, freqs); | 
|  | pr_debug("FREQ: %u - CPUs: %*pbl\n", freqs->new, | 
|  | cpumask_pr_args(policy->cpus)); | 
|  |  | 
|  | for_each_cpu(freqs->cpu, policy->cpus) { | 
|  | trace_cpu_frequency(freqs->new, freqs->cpu); | 
|  | srcu_notifier_call_chain(&cpufreq_transition_notifier_list, | 
|  | CPUFREQ_POSTCHANGE, freqs); | 
|  | } | 
|  |  | 
|  | cpufreq_stats_record_transition(policy, freqs->new); | 
|  | cpufreq_times_record_transition(policy, freqs->new); | 
|  | policy->cur = freqs->new; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Do post notifications when there are chances that transition has failed */ | 
|  | static void cpufreq_notify_post_transition(struct cpufreq_policy *policy, | 
|  | struct cpufreq_freqs *freqs, int transition_failed) | 
|  | { | 
|  | cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE); | 
|  | if (!transition_failed) | 
|  | return; | 
|  |  | 
|  | swap(freqs->old, freqs->new); | 
|  | cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE); | 
|  | cpufreq_notify_transition(policy, freqs, CPUFREQ_POSTCHANGE); | 
|  | } | 
|  |  | 
|  | void cpufreq_freq_transition_begin(struct cpufreq_policy *policy, | 
|  | struct cpufreq_freqs *freqs) | 
|  | { | 
|  |  | 
|  | /* | 
|  | * Catch double invocations of _begin() which lead to self-deadlock. | 
|  | * ASYNC_NOTIFICATION drivers are left out because the cpufreq core | 
|  | * doesn't invoke _begin() on their behalf, and hence the chances of | 
|  | * double invocations are very low. Moreover, there are scenarios | 
|  | * where these checks can emit false-positive warnings in these | 
|  | * drivers; so we avoid that by skipping them altogether. | 
|  | */ | 
|  | WARN_ON(!(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION) | 
|  | && current == policy->transition_task); | 
|  |  | 
|  | wait: | 
|  | wait_event(policy->transition_wait, !policy->transition_ongoing); | 
|  |  | 
|  | spin_lock(&policy->transition_lock); | 
|  |  | 
|  | if (unlikely(policy->transition_ongoing)) { | 
|  | spin_unlock(&policy->transition_lock); | 
|  | goto wait; | 
|  | } | 
|  |  | 
|  | policy->transition_ongoing = true; | 
|  | policy->transition_task = current; | 
|  |  | 
|  | spin_unlock(&policy->transition_lock); | 
|  |  | 
|  | cpufreq_notify_transition(policy, freqs, CPUFREQ_PRECHANGE); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_freq_transition_begin); | 
|  |  | 
|  | void cpufreq_freq_transition_end(struct cpufreq_policy *policy, | 
|  | struct cpufreq_freqs *freqs, int transition_failed) | 
|  | { | 
|  | if (unlikely(WARN_ON(!policy->transition_ongoing))) | 
|  | return; | 
|  |  | 
|  | cpufreq_notify_post_transition(policy, freqs, transition_failed); | 
|  |  | 
|  | policy->transition_ongoing = false; | 
|  | policy->transition_task = NULL; | 
|  |  | 
|  | wake_up(&policy->transition_wait); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end); | 
|  |  | 
|  | /* | 
|  | * Fast frequency switching status count.  Positive means "enabled", negative | 
|  | * means "disabled" and 0 means "not decided yet". | 
|  | */ | 
|  | static int cpufreq_fast_switch_count; | 
|  | static DEFINE_MUTEX(cpufreq_fast_switch_lock); | 
|  |  | 
|  | static void cpufreq_list_transition_notifiers(void) | 
|  | { | 
|  | struct notifier_block *nb; | 
|  |  | 
|  | pr_info("Registered transition notifiers:\n"); | 
|  |  | 
|  | mutex_lock(&cpufreq_transition_notifier_list.mutex); | 
|  |  | 
|  | for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next) | 
|  | pr_info("%pF\n", nb->notifier_call); | 
|  |  | 
|  | mutex_unlock(&cpufreq_transition_notifier_list.mutex); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_enable_fast_switch - Enable fast frequency switching for policy. | 
|  | * @policy: cpufreq policy to enable fast frequency switching for. | 
|  | * | 
|  | * Try to enable fast frequency switching for @policy. | 
|  | * | 
|  | * The attempt will fail if there is at least one transition notifier registered | 
|  | * at this point, as fast frequency switching is quite fundamentally at odds | 
|  | * with transition notifiers.  Thus if successful, it will make registration of | 
|  | * transition notifiers fail going forward. | 
|  | */ | 
|  | void cpufreq_enable_fast_switch(struct cpufreq_policy *policy) | 
|  | { | 
|  | lockdep_assert_held(&policy->rwsem); | 
|  |  | 
|  | if (!policy->fast_switch_possible) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&cpufreq_fast_switch_lock); | 
|  | if (cpufreq_fast_switch_count >= 0) { | 
|  | cpufreq_fast_switch_count++; | 
|  | policy->fast_switch_enabled = true; | 
|  | } else { | 
|  | pr_warn("CPU%u: Fast frequency switching not enabled\n", | 
|  | policy->cpu); | 
|  | cpufreq_list_transition_notifiers(); | 
|  | } | 
|  | mutex_unlock(&cpufreq_fast_switch_lock); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch); | 
|  |  | 
|  | /** | 
|  | * cpufreq_disable_fast_switch - Disable fast frequency switching for policy. | 
|  | * @policy: cpufreq policy to disable fast frequency switching for. | 
|  | */ | 
|  | void cpufreq_disable_fast_switch(struct cpufreq_policy *policy) | 
|  | { | 
|  | mutex_lock(&cpufreq_fast_switch_lock); | 
|  | if (policy->fast_switch_enabled) { | 
|  | policy->fast_switch_enabled = false; | 
|  | if (!WARN_ON(cpufreq_fast_switch_count <= 0)) | 
|  | cpufreq_fast_switch_count--; | 
|  | } | 
|  | mutex_unlock(&cpufreq_fast_switch_lock); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch); | 
|  |  | 
|  | /** | 
|  | * cpufreq_driver_resolve_freq - Map a target frequency to a driver-supported | 
|  | * one. | 
|  | * @target_freq: target frequency to resolve. | 
|  | * | 
|  | * The target to driver frequency mapping is cached in the policy. | 
|  | * | 
|  | * Return: Lowest driver-supported frequency greater than or equal to the | 
|  | * given target_freq, subject to policy (min/max) and driver limitations. | 
|  | */ | 
|  | unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq) | 
|  | { | 
|  | target_freq = clamp_val(target_freq, policy->min, policy->max); | 
|  | policy->cached_target_freq = target_freq; | 
|  |  | 
|  | if (cpufreq_driver->target_index) { | 
|  | int idx; | 
|  |  | 
|  | idx = cpufreq_frequency_table_target(policy, target_freq, | 
|  | CPUFREQ_RELATION_L); | 
|  | policy->cached_resolved_idx = idx; | 
|  | return policy->freq_table[idx].frequency; | 
|  | } | 
|  |  | 
|  | if (cpufreq_driver->resolve_freq) | 
|  | return cpufreq_driver->resolve_freq(policy, target_freq); | 
|  |  | 
|  | return target_freq; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq); | 
|  |  | 
|  | unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy) | 
|  | { | 
|  | unsigned int latency; | 
|  |  | 
|  | if (policy->transition_delay_us) | 
|  | return policy->transition_delay_us; | 
|  |  | 
|  | latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC; | 
|  | if (latency) { | 
|  | /* | 
|  | * For platforms that can change the frequency very fast (< 10 | 
|  | * us), the above formula gives a decent transition delay. But | 
|  | * for platforms where transition_latency is in milliseconds, it | 
|  | * ends up giving unrealistic values. | 
|  | * | 
|  | * Cap the default transition delay to 10 ms, which seems to be | 
|  | * a reasonable amount of time after which we should reevaluate | 
|  | * the frequency. | 
|  | */ | 
|  | return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000); | 
|  | } | 
|  |  | 
|  | return LATENCY_MULTIPLIER; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_policy_transition_delay_us); | 
|  |  | 
|  | /********************************************************************* | 
|  | *                          SYSFS INTERFACE                          * | 
|  | *********************************************************************/ | 
|  | static ssize_t show_boost(struct kobject *kobj, | 
|  | struct kobj_attribute *attr, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", cpufreq_driver->boost_enabled); | 
|  | } | 
|  |  | 
|  | static ssize_t store_boost(struct kobject *kobj, struct kobj_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int ret, enable; | 
|  |  | 
|  | ret = sscanf(buf, "%d", &enable); | 
|  | if (ret != 1 || enable < 0 || enable > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (cpufreq_boost_trigger_state(enable)) { | 
|  | pr_err("%s: Cannot %s BOOST!\n", | 
|  | __func__, enable ? "enable" : "disable"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: cpufreq BOOST %s\n", | 
|  | __func__, enable ? "enabled" : "disabled"); | 
|  |  | 
|  | return count; | 
|  | } | 
|  | define_one_global_rw(boost); | 
|  |  | 
|  | static struct cpufreq_governor *find_governor(const char *str_governor) | 
|  | { | 
|  | struct cpufreq_governor *t; | 
|  |  | 
|  | for_each_governor(t) | 
|  | if (!strncasecmp(str_governor, t->name, CPUFREQ_NAME_LEN)) | 
|  | return t; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_parse_governor - parse a governor string | 
|  | */ | 
|  | static int cpufreq_parse_governor(char *str_governor, | 
|  | struct cpufreq_policy *policy) | 
|  | { | 
|  | if (cpufreq_driver->setpolicy) { | 
|  | if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) { | 
|  | policy->policy = CPUFREQ_POLICY_PERFORMANCE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) { | 
|  | policy->policy = CPUFREQ_POLICY_POWERSAVE; | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | struct cpufreq_governor *t; | 
|  |  | 
|  | mutex_lock(&cpufreq_governor_mutex); | 
|  |  | 
|  | t = find_governor(str_governor); | 
|  | if (!t) { | 
|  | int ret; | 
|  |  | 
|  | mutex_unlock(&cpufreq_governor_mutex); | 
|  |  | 
|  | ret = request_module("cpufreq_%s", str_governor); | 
|  | if (ret) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&cpufreq_governor_mutex); | 
|  |  | 
|  | t = find_governor(str_governor); | 
|  | } | 
|  | if (t && !try_module_get(t->owner)) | 
|  | t = NULL; | 
|  |  | 
|  | mutex_unlock(&cpufreq_governor_mutex); | 
|  |  | 
|  | if (t) { | 
|  | policy->governor = t; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_per_cpu_attr_read() / show_##file_name() - | 
|  | * print out cpufreq information | 
|  | * | 
|  | * Write out information from cpufreq_driver->policy[cpu]; object must be | 
|  | * "unsigned int". | 
|  | */ | 
|  |  | 
|  | #define show_one(file_name, object)			\ | 
|  | static ssize_t show_##file_name				\ | 
|  | (struct cpufreq_policy *policy, char *buf)		\ | 
|  | {							\ | 
|  | return sprintf(buf, "%u\n", policy->object);	\ | 
|  | } | 
|  |  | 
|  | show_one(cpuinfo_min_freq, cpuinfo.min_freq); | 
|  | show_one(cpuinfo_max_freq, cpuinfo.max_freq); | 
|  | show_one(cpuinfo_transition_latency, cpuinfo.transition_latency); | 
|  | show_one(scaling_min_freq, min); | 
|  | show_one(scaling_max_freq, max); | 
|  |  | 
|  | __weak unsigned int arch_freq_get_on_cpu(int cpu) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t show_scaling_cur_freq(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | ssize_t ret; | 
|  | unsigned int freq; | 
|  |  | 
|  | freq = arch_freq_get_on_cpu(policy->cpu); | 
|  | if (freq) | 
|  | ret = sprintf(buf, "%u\n", freq); | 
|  | else if (cpufreq_driver && cpufreq_driver->setpolicy && | 
|  | cpufreq_driver->get) | 
|  | ret = sprintf(buf, "%u\n", cpufreq_driver->get(policy->cpu)); | 
|  | else | 
|  | ret = sprintf(buf, "%u\n", policy->cur); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cpufreq_set_policy(struct cpufreq_policy *policy, | 
|  | struct cpufreq_policy *new_policy); | 
|  |  | 
|  | /** | 
|  | * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access | 
|  | */ | 
|  | #define store_one(file_name, object)			\ | 
|  | static ssize_t store_##file_name					\ | 
|  | (struct cpufreq_policy *policy, const char *buf, size_t count)		\ | 
|  | {									\ | 
|  | int ret, temp;							\ | 
|  | struct cpufreq_policy new_policy;				\ | 
|  | \ | 
|  | memcpy(&new_policy, policy, sizeof(*policy));			\ | 
|  | new_policy.min = policy->user_policy.min;			\ | 
|  | new_policy.max = policy->user_policy.max;			\ | 
|  | \ | 
|  | ret = sscanf(buf, "%u", &new_policy.object);			\ | 
|  | if (ret != 1)							\ | 
|  | return -EINVAL;						\ | 
|  | \ | 
|  | temp = new_policy.object;					\ | 
|  | ret = cpufreq_set_policy(policy, &new_policy);		\ | 
|  | if (!ret)							\ | 
|  | policy->user_policy.object = temp;			\ | 
|  | \ | 
|  | return ret ? ret : count;					\ | 
|  | } | 
|  |  | 
|  | store_one(scaling_min_freq, min); | 
|  | store_one(scaling_max_freq, max); | 
|  |  | 
|  | /** | 
|  | * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware | 
|  | */ | 
|  | static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy, | 
|  | char *buf) | 
|  | { | 
|  | unsigned int cur_freq = __cpufreq_get(policy); | 
|  |  | 
|  | if (cur_freq) | 
|  | return sprintf(buf, "%u\n", cur_freq); | 
|  |  | 
|  | return sprintf(buf, "<unknown>\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * show_scaling_governor - show the current policy for the specified CPU | 
|  | */ | 
|  | static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | if (policy->policy == CPUFREQ_POLICY_POWERSAVE) | 
|  | return sprintf(buf, "powersave\n"); | 
|  | else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) | 
|  | return sprintf(buf, "performance\n"); | 
|  | else if (policy->governor) | 
|  | return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", | 
|  | policy->governor->name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * store_scaling_governor - store policy for the specified CPU | 
|  | */ | 
|  | static ssize_t store_scaling_governor(struct cpufreq_policy *policy, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | int ret; | 
|  | char	str_governor[16]; | 
|  | struct cpufreq_policy new_policy; | 
|  |  | 
|  | memcpy(&new_policy, policy, sizeof(*policy)); | 
|  |  | 
|  | ret = sscanf(buf, "%15s", str_governor); | 
|  | if (ret != 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (cpufreq_parse_governor(str_governor, &new_policy)) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = cpufreq_set_policy(policy, &new_policy); | 
|  |  | 
|  | if (new_policy.governor) | 
|  | module_put(new_policy.governor->owner); | 
|  |  | 
|  | return ret ? ret : count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * show_scaling_driver - show the cpufreq driver currently loaded | 
|  | */ | 
|  | static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * show_scaling_available_governors - show the available CPUfreq governors | 
|  | */ | 
|  | static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, | 
|  | char *buf) | 
|  | { | 
|  | ssize_t i = 0; | 
|  | struct cpufreq_governor *t; | 
|  |  | 
|  | if (!has_target()) { | 
|  | i += sprintf(buf, "performance powersave"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for_each_governor(t) { | 
|  | if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) | 
|  | - (CPUFREQ_NAME_LEN + 2))) | 
|  | goto out; | 
|  | i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name); | 
|  | } | 
|  | out: | 
|  | i += sprintf(&buf[i], "\n"); | 
|  | return i; | 
|  | } | 
|  |  | 
|  | ssize_t cpufreq_show_cpus(const struct cpumask *mask, char *buf) | 
|  | { | 
|  | ssize_t i = 0; | 
|  | unsigned int cpu; | 
|  |  | 
|  | for_each_cpu(cpu, mask) { | 
|  | if (i) | 
|  | i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " "); | 
|  | i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu); | 
|  | if (i >= (PAGE_SIZE - 5)) | 
|  | break; | 
|  | } | 
|  | i += sprintf(&buf[i], "\n"); | 
|  | return i; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_show_cpus); | 
|  |  | 
|  | /** | 
|  | * show_related_cpus - show the CPUs affected by each transition even if | 
|  | * hw coordination is in use | 
|  | */ | 
|  | static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | return cpufreq_show_cpus(policy->related_cpus, buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * show_affected_cpus - show the CPUs affected by each transition | 
|  | */ | 
|  | static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | return cpufreq_show_cpus(policy->cpus, buf); | 
|  | } | 
|  |  | 
|  | static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | unsigned int freq = 0; | 
|  | unsigned int ret; | 
|  |  | 
|  | if (!policy->governor || !policy->governor->store_setspeed) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = sscanf(buf, "%u", &freq); | 
|  | if (ret != 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | policy->governor->store_setspeed(policy, freq); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | if (!policy->governor || !policy->governor->show_setspeed) | 
|  | return sprintf(buf, "<unsupported>\n"); | 
|  |  | 
|  | return policy->governor->show_setspeed(policy, buf); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * show_bios_limit - show the current cpufreq HW/BIOS limitation | 
|  | */ | 
|  | static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf) | 
|  | { | 
|  | unsigned int limit; | 
|  | int ret; | 
|  | if (cpufreq_driver->bios_limit) { | 
|  | ret = cpufreq_driver->bios_limit(policy->cpu, &limit); | 
|  | if (!ret) | 
|  | return sprintf(buf, "%u\n", limit); | 
|  | } | 
|  | return sprintf(buf, "%u\n", policy->cpuinfo.max_freq); | 
|  | } | 
|  |  | 
|  | cpufreq_freq_attr_ro_perm(cpuinfo_cur_freq, 0400); | 
|  | cpufreq_freq_attr_ro(cpuinfo_min_freq); | 
|  | cpufreq_freq_attr_ro(cpuinfo_max_freq); | 
|  | cpufreq_freq_attr_ro(cpuinfo_transition_latency); | 
|  | cpufreq_freq_attr_ro(scaling_available_governors); | 
|  | cpufreq_freq_attr_ro(scaling_driver); | 
|  | cpufreq_freq_attr_ro(scaling_cur_freq); | 
|  | cpufreq_freq_attr_ro(bios_limit); | 
|  | cpufreq_freq_attr_ro(related_cpus); | 
|  | cpufreq_freq_attr_ro(affected_cpus); | 
|  | cpufreq_freq_attr_rw(scaling_min_freq); | 
|  | cpufreq_freq_attr_rw(scaling_max_freq); | 
|  | cpufreq_freq_attr_rw(scaling_governor); | 
|  | cpufreq_freq_attr_rw(scaling_setspeed); | 
|  |  | 
|  | static struct attribute *default_attrs[] = { | 
|  | &cpuinfo_min_freq.attr, | 
|  | &cpuinfo_max_freq.attr, | 
|  | &cpuinfo_transition_latency.attr, | 
|  | &scaling_min_freq.attr, | 
|  | &scaling_max_freq.attr, | 
|  | &affected_cpus.attr, | 
|  | &related_cpus.attr, | 
|  | &scaling_governor.attr, | 
|  | &scaling_driver.attr, | 
|  | &scaling_available_governors.attr, | 
|  | &scaling_setspeed.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | #define to_policy(k) container_of(k, struct cpufreq_policy, kobj) | 
|  | #define to_attr(a) container_of(a, struct freq_attr, attr) | 
|  |  | 
|  | static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) | 
|  | { | 
|  | struct cpufreq_policy *policy = to_policy(kobj); | 
|  | struct freq_attr *fattr = to_attr(attr); | 
|  | ssize_t ret; | 
|  |  | 
|  | if (!fattr->show) | 
|  | return -EIO; | 
|  |  | 
|  | down_read(&policy->rwsem); | 
|  | ret = fattr->show(policy, buf); | 
|  | up_read(&policy->rwsem); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t store(struct kobject *kobj, struct attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct cpufreq_policy *policy = to_policy(kobj); | 
|  | struct freq_attr *fattr = to_attr(attr); | 
|  | ssize_t ret = -EINVAL; | 
|  |  | 
|  | if (!fattr->store) | 
|  | return -EIO; | 
|  |  | 
|  | /* | 
|  | * cpus_read_trylock() is used here to work around a circular lock | 
|  | * dependency problem with respect to the cpufreq_register_driver(). | 
|  | */ | 
|  | if (!cpus_read_trylock()) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (cpu_online(policy->cpu)) { | 
|  | down_write(&policy->rwsem); | 
|  | ret = fattr->store(policy, buf, count); | 
|  | up_write(&policy->rwsem); | 
|  | } | 
|  |  | 
|  | cpus_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void cpufreq_sysfs_release(struct kobject *kobj) | 
|  | { | 
|  | struct cpufreq_policy *policy = to_policy(kobj); | 
|  | pr_debug("last reference is dropped\n"); | 
|  | complete(&policy->kobj_unregister); | 
|  | } | 
|  |  | 
|  | static const struct sysfs_ops sysfs_ops = { | 
|  | .show	= show, | 
|  | .store	= store, | 
|  | }; | 
|  |  | 
|  | static struct kobj_type ktype_cpufreq = { | 
|  | .sysfs_ops	= &sysfs_ops, | 
|  | .default_attrs	= default_attrs, | 
|  | .release	= cpufreq_sysfs_release, | 
|  | }; | 
|  |  | 
|  | static void add_cpu_dev_symlink(struct cpufreq_policy *policy, unsigned int cpu) | 
|  | { | 
|  | struct device *dev = get_cpu_device(cpu); | 
|  |  | 
|  | if (!dev) | 
|  | return; | 
|  |  | 
|  | if (cpumask_test_and_set_cpu(cpu, policy->real_cpus)) | 
|  | return; | 
|  |  | 
|  | dev_dbg(dev, "%s: Adding symlink\n", __func__); | 
|  | if (sysfs_create_link(&dev->kobj, &policy->kobj, "cpufreq")) | 
|  | dev_err(dev, "cpufreq symlink creation failed\n"); | 
|  | } | 
|  |  | 
|  | static void remove_cpu_dev_symlink(struct cpufreq_policy *policy, | 
|  | struct device *dev) | 
|  | { | 
|  | dev_dbg(dev, "%s: Removing symlink\n", __func__); | 
|  | sysfs_remove_link(&dev->kobj, "cpufreq"); | 
|  | } | 
|  |  | 
|  | static int cpufreq_add_dev_interface(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct freq_attr **drv_attr; | 
|  | int ret = 0; | 
|  |  | 
|  | /* set up files for this cpu device */ | 
|  | drv_attr = cpufreq_driver->attr; | 
|  | while (drv_attr && *drv_attr) { | 
|  | ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); | 
|  | if (ret) | 
|  | return ret; | 
|  | drv_attr++; | 
|  | } | 
|  | if (cpufreq_driver->get) { | 
|  | ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (cpufreq_driver->bios_limit) { | 
|  | ret = sysfs_create_file(&policy->kobj, &bios_limit.attr); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | __weak struct cpufreq_governor *cpufreq_default_governor(void) | 
|  | { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int cpufreq_init_policy(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct cpufreq_governor *gov = NULL; | 
|  | struct cpufreq_policy new_policy; | 
|  |  | 
|  | memcpy(&new_policy, policy, sizeof(*policy)); | 
|  |  | 
|  | /* Update governor of new_policy to the governor used before hotplug */ | 
|  | gov = find_governor(policy->last_governor); | 
|  | if (gov) { | 
|  | pr_debug("Restoring governor %s for cpu %d\n", | 
|  | policy->governor->name, policy->cpu); | 
|  | } else { | 
|  | gov = cpufreq_default_governor(); | 
|  | if (!gov) | 
|  | return -ENODATA; | 
|  | } | 
|  |  | 
|  | new_policy.governor = gov; | 
|  |  | 
|  | /* Use the default policy if there is no last_policy. */ | 
|  | if (cpufreq_driver->setpolicy) { | 
|  | if (policy->last_policy) | 
|  | new_policy.policy = policy->last_policy; | 
|  | else | 
|  | cpufreq_parse_governor(gov->name, &new_policy); | 
|  | } | 
|  | /* set default policy */ | 
|  | return cpufreq_set_policy(policy, &new_policy); | 
|  | } | 
|  |  | 
|  | static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | /* Has this CPU been taken care of already? */ | 
|  | if (cpumask_test_cpu(cpu, policy->cpus)) | 
|  | return 0; | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  | if (has_target()) | 
|  | cpufreq_stop_governor(policy); | 
|  |  | 
|  | cpumask_set_cpu(cpu, policy->cpus); | 
|  |  | 
|  | if (has_target()) { | 
|  | ret = cpufreq_start_governor(policy); | 
|  | if (ret) | 
|  | pr_err("%s: Failed to start governor\n", __func__); | 
|  | } | 
|  | up_write(&policy->rwsem); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void handle_update(struct work_struct *work) | 
|  | { | 
|  | struct cpufreq_policy *policy = | 
|  | container_of(work, struct cpufreq_policy, update); | 
|  | unsigned int cpu = policy->cpu; | 
|  | pr_debug("handle_update for cpu %u called\n", cpu); | 
|  | cpufreq_update_policy(cpu); | 
|  | } | 
|  |  | 
|  | static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | int ret; | 
|  |  | 
|  | policy = kzalloc(sizeof(*policy), GFP_KERNEL); | 
|  | if (!policy) | 
|  | return NULL; | 
|  |  | 
|  | if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) | 
|  | goto err_free_policy; | 
|  |  | 
|  | if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) | 
|  | goto err_free_cpumask; | 
|  |  | 
|  | if (!zalloc_cpumask_var(&policy->real_cpus, GFP_KERNEL)) | 
|  | goto err_free_rcpumask; | 
|  |  | 
|  | ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, | 
|  | cpufreq_global_kobject, "policy%u", cpu); | 
|  | if (ret) { | 
|  | pr_err("%s: failed to init policy->kobj: %d\n", __func__, ret); | 
|  | kobject_put(&policy->kobj); | 
|  | goto err_free_real_cpus; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&policy->policy_list); | 
|  | init_rwsem(&policy->rwsem); | 
|  | spin_lock_init(&policy->transition_lock); | 
|  | init_waitqueue_head(&policy->transition_wait); | 
|  | init_completion(&policy->kobj_unregister); | 
|  | INIT_WORK(&policy->update, handle_update); | 
|  |  | 
|  | policy->cpu = cpu; | 
|  | return policy; | 
|  |  | 
|  | err_free_real_cpus: | 
|  | free_cpumask_var(policy->real_cpus); | 
|  | err_free_rcpumask: | 
|  | free_cpumask_var(policy->related_cpus); | 
|  | err_free_cpumask: | 
|  | free_cpumask_var(policy->cpus); | 
|  | err_free_policy: | 
|  | kfree(policy); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void cpufreq_policy_put_kobj(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct kobject *kobj; | 
|  | struct completion *cmp; | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  | cpufreq_stats_free_table(policy); | 
|  | kobj = &policy->kobj; | 
|  | cmp = &policy->kobj_unregister; | 
|  | up_write(&policy->rwsem); | 
|  | kobject_put(kobj); | 
|  |  | 
|  | /* | 
|  | * We need to make sure that the underlying kobj is | 
|  | * actually not referenced anymore by anybody before we | 
|  | * proceed with unloading. | 
|  | */ | 
|  | pr_debug("waiting for dropping of refcount\n"); | 
|  | wait_for_completion(cmp); | 
|  | pr_debug("wait complete\n"); | 
|  | } | 
|  |  | 
|  | static void cpufreq_policy_free(struct cpufreq_policy *policy) | 
|  | { | 
|  | unsigned long flags; | 
|  | int cpu; | 
|  |  | 
|  | /* Remove policy from list */ | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | list_del(&policy->policy_list); | 
|  |  | 
|  | for_each_cpu(cpu, policy->related_cpus) | 
|  | per_cpu(cpufreq_cpu_data, cpu) = NULL; | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | cpufreq_policy_put_kobj(policy); | 
|  | free_cpumask_var(policy->real_cpus); | 
|  | free_cpumask_var(policy->related_cpus); | 
|  | free_cpumask_var(policy->cpus); | 
|  | kfree(policy); | 
|  | } | 
|  |  | 
|  | static int cpufreq_online(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | bool new_policy; | 
|  | unsigned long flags; | 
|  | unsigned int j; | 
|  | int ret; | 
|  |  | 
|  | pr_debug("%s: bringing CPU%u online\n", __func__, cpu); | 
|  |  | 
|  | /* Check if this CPU already has a policy to manage it */ | 
|  | policy = per_cpu(cpufreq_cpu_data, cpu); | 
|  | if (policy) { | 
|  | WARN_ON(!cpumask_test_cpu(cpu, policy->related_cpus)); | 
|  | if (!policy_is_inactive(policy)) | 
|  | return cpufreq_add_policy_cpu(policy, cpu); | 
|  |  | 
|  | /* This is the only online CPU for the policy.  Start over. */ | 
|  | new_policy = false; | 
|  | down_write(&policy->rwsem); | 
|  | policy->cpu = cpu; | 
|  | policy->governor = NULL; | 
|  | up_write(&policy->rwsem); | 
|  | } else { | 
|  | new_policy = true; | 
|  | policy = cpufreq_policy_alloc(cpu); | 
|  | if (!policy) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | cpumask_copy(policy->cpus, cpumask_of(cpu)); | 
|  |  | 
|  | /* call driver. From then on the cpufreq must be able | 
|  | * to accept all calls to ->verify and ->setpolicy for this CPU | 
|  | */ | 
|  | ret = cpufreq_driver->init(policy); | 
|  | if (ret) { | 
|  | pr_debug("initialization failed\n"); | 
|  | goto out_free_policy; | 
|  | } | 
|  |  | 
|  | ret = cpufreq_table_validate_and_sort(policy); | 
|  | if (ret) | 
|  | goto out_exit_policy; | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  |  | 
|  | if (new_policy) { | 
|  | /* related_cpus should at least include policy->cpus. */ | 
|  | cpumask_copy(policy->related_cpus, policy->cpus); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * affected cpus must always be the one, which are online. We aren't | 
|  | * managing offline cpus here. | 
|  | */ | 
|  | cpumask_and(policy->cpus, policy->cpus, cpu_online_mask); | 
|  |  | 
|  | if (new_policy) { | 
|  | policy->user_policy.min = policy->min; | 
|  | policy->user_policy.max = policy->max; | 
|  |  | 
|  | for_each_cpu(j, policy->related_cpus) { | 
|  | per_cpu(cpufreq_cpu_data, j) = policy; | 
|  | add_cpu_dev_symlink(policy, j); | 
|  | } | 
|  | } else { | 
|  | policy->min = policy->user_policy.min; | 
|  | policy->max = policy->user_policy.max; | 
|  | } | 
|  |  | 
|  | if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { | 
|  | policy->cur = cpufreq_driver->get(policy->cpu); | 
|  | if (!policy->cur) { | 
|  | pr_err("%s: ->get() failed\n", __func__); | 
|  | goto out_destroy_policy; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sometimes boot loaders set CPU frequency to a value outside of | 
|  | * frequency table present with cpufreq core. In such cases CPU might be | 
|  | * unstable if it has to run on that frequency for long duration of time | 
|  | * and so its better to set it to a frequency which is specified in | 
|  | * freq-table. This also makes cpufreq stats inconsistent as | 
|  | * cpufreq-stats would fail to register because current frequency of CPU | 
|  | * isn't found in freq-table. | 
|  | * | 
|  | * Because we don't want this change to effect boot process badly, we go | 
|  | * for the next freq which is >= policy->cur ('cur' must be set by now, | 
|  | * otherwise we will end up setting freq to lowest of the table as 'cur' | 
|  | * is initialized to zero). | 
|  | * | 
|  | * We are passing target-freq as "policy->cur - 1" otherwise | 
|  | * __cpufreq_driver_target() would simply fail, as policy->cur will be | 
|  | * equal to target-freq. | 
|  | */ | 
|  | if ((cpufreq_driver->flags & CPUFREQ_NEED_INITIAL_FREQ_CHECK) | 
|  | && has_target()) { | 
|  | /* Are we running at unknown frequency ? */ | 
|  | ret = cpufreq_frequency_table_get_index(policy, policy->cur); | 
|  | if (ret == -EINVAL) { | 
|  | /* Warn user and fix it */ | 
|  | pr_warn("%s: CPU%d: Running at unlisted freq: %u KHz\n", | 
|  | __func__, policy->cpu, policy->cur); | 
|  | ret = __cpufreq_driver_target(policy, policy->cur - 1, | 
|  | CPUFREQ_RELATION_L); | 
|  |  | 
|  | /* | 
|  | * Reaching here after boot in a few seconds may not | 
|  | * mean that system will remain stable at "unknown" | 
|  | * frequency for longer duration. Hence, a BUG_ON(). | 
|  | */ | 
|  | BUG_ON(ret); | 
|  | pr_warn("%s: CPU%d: Unlisted initial frequency changed to: %u KHz\n", | 
|  | __func__, policy->cpu, policy->cur); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (new_policy) { | 
|  | ret = cpufreq_add_dev_interface(policy); | 
|  | if (ret) | 
|  | goto out_destroy_policy; | 
|  |  | 
|  | cpufreq_stats_create_table(policy); | 
|  | cpufreq_times_create_policy(policy); | 
|  |  | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | list_add(&policy->policy_list, &cpufreq_policy_list); | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  | } | 
|  |  | 
|  | ret = cpufreq_init_policy(policy); | 
|  | if (ret) { | 
|  | pr_err("%s: Failed to initialize policy for cpu: %d (%d)\n", | 
|  | __func__, cpu, ret); | 
|  | /* cpufreq_policy_free() will notify based on this */ | 
|  | new_policy = false; | 
|  | goto out_destroy_policy; | 
|  | } | 
|  |  | 
|  | up_write(&policy->rwsem); | 
|  |  | 
|  | kobject_uevent(&policy->kobj, KOBJ_ADD); | 
|  |  | 
|  | /* Callback for handling stuff after policy is ready */ | 
|  | if (cpufreq_driver->ready) | 
|  | cpufreq_driver->ready(policy); | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_CPU_THERMAL) && | 
|  | cpufreq_driver->flags & CPUFREQ_IS_COOLING_DEV) | 
|  | policy->cdev = of_cpufreq_cooling_register(policy); | 
|  |  | 
|  | pr_debug("initialization complete\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_destroy_policy: | 
|  | for_each_cpu(j, policy->real_cpus) | 
|  | remove_cpu_dev_symlink(policy, get_cpu_device(j)); | 
|  |  | 
|  | up_write(&policy->rwsem); | 
|  |  | 
|  | out_exit_policy: | 
|  | if (cpufreq_driver->exit) | 
|  | cpufreq_driver->exit(policy); | 
|  |  | 
|  | out_free_policy: | 
|  | cpufreq_policy_free(policy); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_add_dev - the cpufreq interface for a CPU device. | 
|  | * @dev: CPU device. | 
|  | * @sif: Subsystem interface structure pointer (not used) | 
|  | */ | 
|  | static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | unsigned cpu = dev->id; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu); | 
|  |  | 
|  | if (cpu_online(cpu)) { | 
|  | ret = cpufreq_online(cpu); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Create sysfs link on CPU registration */ | 
|  | policy = per_cpu(cpufreq_cpu_data, cpu); | 
|  | if (policy) | 
|  | add_cpu_dev_symlink(policy, cpu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cpufreq_offline(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | int ret; | 
|  |  | 
|  | pr_debug("%s: unregistering CPU %u\n", __func__, cpu); | 
|  |  | 
|  | policy = cpufreq_cpu_get_raw(cpu); | 
|  | if (!policy) { | 
|  | pr_debug("%s: No cpu_data found\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  | if (has_target()) | 
|  | cpufreq_stop_governor(policy); | 
|  |  | 
|  | cpumask_clear_cpu(cpu, policy->cpus); | 
|  |  | 
|  | if (policy_is_inactive(policy)) { | 
|  | if (has_target()) | 
|  | strncpy(policy->last_governor, policy->governor->name, | 
|  | CPUFREQ_NAME_LEN); | 
|  | else | 
|  | policy->last_policy = policy->policy; | 
|  | } else if (cpu == policy->cpu) { | 
|  | /* Nominate new CPU */ | 
|  | policy->cpu = cpumask_any(policy->cpus); | 
|  | } | 
|  |  | 
|  | /* Start governor again for active policy */ | 
|  | if (!policy_is_inactive(policy)) { | 
|  | if (has_target()) { | 
|  | ret = cpufreq_start_governor(policy); | 
|  | if (ret) | 
|  | pr_err("%s: Failed to start governor\n", __func__); | 
|  | } | 
|  |  | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_CPU_THERMAL) && | 
|  | cpufreq_driver->flags & CPUFREQ_IS_COOLING_DEV) { | 
|  | cpufreq_cooling_unregister(policy->cdev); | 
|  | policy->cdev = NULL; | 
|  | } | 
|  |  | 
|  | if (cpufreq_driver->stop_cpu) | 
|  | cpufreq_driver->stop_cpu(policy); | 
|  |  | 
|  | if (has_target()) | 
|  | cpufreq_exit_governor(policy); | 
|  |  | 
|  | /* | 
|  | * Perform the ->exit() even during light-weight tear-down, | 
|  | * since this is a core component, and is essential for the | 
|  | * subsequent light-weight ->init() to succeed. | 
|  | */ | 
|  | if (cpufreq_driver->exit) { | 
|  | cpufreq_driver->exit(policy); | 
|  | policy->freq_table = NULL; | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | up_write(&policy->rwsem); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_remove_dev - remove a CPU device | 
|  | * | 
|  | * Removes the cpufreq interface for a CPU device. | 
|  | */ | 
|  | static void cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) | 
|  | { | 
|  | unsigned int cpu = dev->id; | 
|  | struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); | 
|  |  | 
|  | if (!policy) | 
|  | return; | 
|  |  | 
|  | if (cpu_online(cpu)) | 
|  | cpufreq_offline(cpu); | 
|  |  | 
|  | cpumask_clear_cpu(cpu, policy->real_cpus); | 
|  | remove_cpu_dev_symlink(policy, dev); | 
|  |  | 
|  | if (cpumask_empty(policy->real_cpus)) | 
|  | cpufreq_policy_free(policy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're | 
|  | *	in deep trouble. | 
|  | *	@policy: policy managing CPUs | 
|  | *	@new_freq: CPU frequency the CPU actually runs at | 
|  | * | 
|  | *	We adjust to current frequency first, and need to clean up later. | 
|  | *	So either call to cpufreq_update_policy() or schedule handle_update()). | 
|  | */ | 
|  | static void cpufreq_out_of_sync(struct cpufreq_policy *policy, | 
|  | unsigned int new_freq) | 
|  | { | 
|  | struct cpufreq_freqs freqs; | 
|  |  | 
|  | pr_debug("Warning: CPU frequency out of sync: cpufreq and timing core thinks of %u, is %u kHz\n", | 
|  | policy->cur, new_freq); | 
|  |  | 
|  | freqs.old = policy->cur; | 
|  | freqs.new = new_freq; | 
|  |  | 
|  | cpufreq_freq_transition_begin(policy, &freqs); | 
|  | cpufreq_freq_transition_end(policy, &freqs, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur | 
|  | * @cpu: CPU number | 
|  | * | 
|  | * This is the last known freq, without actually getting it from the driver. | 
|  | * Return value will be same as what is shown in scaling_cur_freq in sysfs. | 
|  | */ | 
|  | unsigned int cpufreq_quick_get(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | unsigned int ret_freq = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | read_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get) { | 
|  | ret_freq = cpufreq_driver->get(cpu); | 
|  | read_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  | return ret_freq; | 
|  | } | 
|  |  | 
|  | read_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | policy = cpufreq_cpu_get(cpu); | 
|  | if (policy) { | 
|  | ret_freq = policy->cur; | 
|  | cpufreq_cpu_put(policy); | 
|  | } | 
|  |  | 
|  | return ret_freq; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_quick_get); | 
|  |  | 
|  | /** | 
|  | * cpufreq_quick_get_max - get the max reported CPU frequency for this CPU | 
|  | * @cpu: CPU number | 
|  | * | 
|  | * Just return the max possible frequency for a given CPU. | 
|  | */ | 
|  | unsigned int cpufreq_quick_get_max(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | 
|  | unsigned int ret_freq = 0; | 
|  |  | 
|  | if (policy) { | 
|  | ret_freq = policy->max; | 
|  | cpufreq_cpu_put(policy); | 
|  | } | 
|  |  | 
|  | return ret_freq; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_quick_get_max); | 
|  |  | 
|  | static unsigned int __cpufreq_get(struct cpufreq_policy *policy) | 
|  | { | 
|  | unsigned int ret_freq = 0; | 
|  |  | 
|  | if (unlikely(policy_is_inactive(policy)) || !cpufreq_driver->get) | 
|  | return ret_freq; | 
|  |  | 
|  | ret_freq = cpufreq_driver->get(policy->cpu); | 
|  |  | 
|  | /* | 
|  | * If fast frequency switching is used with the given policy, the check | 
|  | * against policy->cur is pointless, so skip it in that case too. | 
|  | */ | 
|  | if (policy->fast_switch_enabled) | 
|  | return ret_freq; | 
|  |  | 
|  | if (ret_freq && policy->cur && | 
|  | !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) { | 
|  | /* verify no discrepancy between actual and | 
|  | saved value exists */ | 
|  | if (unlikely(ret_freq != policy->cur)) { | 
|  | cpufreq_out_of_sync(policy, ret_freq); | 
|  | schedule_work(&policy->update); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret_freq; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_get - get the current CPU frequency (in kHz) | 
|  | * @cpu: CPU number | 
|  | * | 
|  | * Get the CPU current (static) CPU frequency | 
|  | */ | 
|  | unsigned int cpufreq_get(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | 
|  | unsigned int ret_freq = 0; | 
|  |  | 
|  | if (policy) { | 
|  | down_read(&policy->rwsem); | 
|  | ret_freq = __cpufreq_get(policy); | 
|  | up_read(&policy->rwsem); | 
|  |  | 
|  | cpufreq_cpu_put(policy); | 
|  | } | 
|  |  | 
|  | return ret_freq; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_get); | 
|  |  | 
|  | static unsigned int cpufreq_update_current_freq(struct cpufreq_policy *policy) | 
|  | { | 
|  | unsigned int new_freq; | 
|  |  | 
|  | new_freq = cpufreq_driver->get(policy->cpu); | 
|  | if (!new_freq) | 
|  | return 0; | 
|  |  | 
|  | if (!policy->cur) { | 
|  | pr_debug("cpufreq: Driver did not initialize current freq\n"); | 
|  | policy->cur = new_freq; | 
|  | } else if (policy->cur != new_freq && has_target()) { | 
|  | cpufreq_out_of_sync(policy, new_freq); | 
|  | } | 
|  |  | 
|  | return new_freq; | 
|  | } | 
|  |  | 
|  | static struct subsys_interface cpufreq_interface = { | 
|  | .name		= "cpufreq", | 
|  | .subsys		= &cpu_subsys, | 
|  | .add_dev	= cpufreq_add_dev, | 
|  | .remove_dev	= cpufreq_remove_dev, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * In case platform wants some specific frequency to be configured | 
|  | * during suspend.. | 
|  | */ | 
|  | int cpufreq_generic_suspend(struct cpufreq_policy *policy) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!policy->suspend_freq) { | 
|  | pr_debug("%s: suspend_freq not defined\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: Setting suspend-freq: %u\n", __func__, | 
|  | policy->suspend_freq); | 
|  |  | 
|  | ret = __cpufreq_driver_target(policy, policy->suspend_freq, | 
|  | CPUFREQ_RELATION_H); | 
|  | if (ret) | 
|  | pr_err("%s: unable to set suspend-freq: %u. err: %d\n", | 
|  | __func__, policy->suspend_freq, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_generic_suspend); | 
|  |  | 
|  | /** | 
|  | * cpufreq_suspend() - Suspend CPUFreq governors | 
|  | * | 
|  | * Called during system wide Suspend/Hibernate cycles for suspending governors | 
|  | * as some platforms can't change frequency after this point in suspend cycle. | 
|  | * Because some of the devices (like: i2c, regulators, etc) they use for | 
|  | * changing frequency are suspended quickly after this point. | 
|  | */ | 
|  | void cpufreq_suspend(void) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  |  | 
|  | if (!cpufreq_driver) | 
|  | return; | 
|  |  | 
|  | if (!has_target() && !cpufreq_driver->suspend) | 
|  | goto suspend; | 
|  |  | 
|  | pr_debug("%s: Suspending Governors\n", __func__); | 
|  |  | 
|  | for_each_active_policy(policy) { | 
|  | if (has_target()) { | 
|  | down_write(&policy->rwsem); | 
|  | cpufreq_stop_governor(policy); | 
|  | up_write(&policy->rwsem); | 
|  | } | 
|  |  | 
|  | if (cpufreq_driver->suspend && cpufreq_driver->suspend(policy)) | 
|  | pr_err("%s: Failed to suspend driver: %p\n", __func__, | 
|  | policy); | 
|  | } | 
|  |  | 
|  | suspend: | 
|  | cpufreq_suspended = true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_resume() - Resume CPUFreq governors | 
|  | * | 
|  | * Called during system wide Suspend/Hibernate cycle for resuming governors that | 
|  | * are suspended with cpufreq_suspend(). | 
|  | */ | 
|  | void cpufreq_resume(void) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | int ret; | 
|  |  | 
|  | if (!cpufreq_driver) | 
|  | return; | 
|  |  | 
|  | if (unlikely(!cpufreq_suspended)) | 
|  | return; | 
|  |  | 
|  | cpufreq_suspended = false; | 
|  |  | 
|  | if (!has_target() && !cpufreq_driver->resume) | 
|  | return; | 
|  |  | 
|  | pr_debug("%s: Resuming Governors\n", __func__); | 
|  |  | 
|  | for_each_active_policy(policy) { | 
|  | if (cpufreq_driver->resume && cpufreq_driver->resume(policy)) { | 
|  | pr_err("%s: Failed to resume driver: %p\n", __func__, | 
|  | policy); | 
|  | } else if (has_target()) { | 
|  | down_write(&policy->rwsem); | 
|  | ret = cpufreq_start_governor(policy); | 
|  | up_write(&policy->rwsem); | 
|  |  | 
|  | if (ret) | 
|  | pr_err("%s: Failed to start governor for policy: %p\n", | 
|  | __func__, policy); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	cpufreq_get_current_driver - return current driver's name | 
|  | * | 
|  | *	Return the name string of the currently loaded cpufreq driver | 
|  | *	or NULL, if none. | 
|  | */ | 
|  | const char *cpufreq_get_current_driver(void) | 
|  | { | 
|  | if (cpufreq_driver) | 
|  | return cpufreq_driver->name; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_get_current_driver); | 
|  |  | 
|  | /** | 
|  | *	cpufreq_get_driver_data - return current driver data | 
|  | * | 
|  | *	Return the private data of the currently loaded cpufreq | 
|  | *	driver, or NULL if no cpufreq driver is loaded. | 
|  | */ | 
|  | void *cpufreq_get_driver_data(void) | 
|  | { | 
|  | if (cpufreq_driver) | 
|  | return cpufreq_driver->driver_data; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_get_driver_data); | 
|  |  | 
|  | /********************************************************************* | 
|  | *                     NOTIFIER LISTS INTERFACE                      * | 
|  | *********************************************************************/ | 
|  |  | 
|  | /** | 
|  | *	cpufreq_register_notifier - register a driver with cpufreq | 
|  | *	@nb: notifier function to register | 
|  | *      @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER | 
|  | * | 
|  | *	Add a driver to one of two lists: either a list of drivers that | 
|  | *      are notified about clock rate changes (once before and once after | 
|  | *      the transition), or a list of drivers that are notified about | 
|  | *      changes in cpufreq policy. | 
|  | * | 
|  | *	This function may sleep, and has the same return conditions as | 
|  | *	blocking_notifier_chain_register. | 
|  | */ | 
|  | int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (list) { | 
|  | case CPUFREQ_TRANSITION_NOTIFIER: | 
|  | mutex_lock(&cpufreq_fast_switch_lock); | 
|  |  | 
|  | if (cpufreq_fast_switch_count > 0) { | 
|  | mutex_unlock(&cpufreq_fast_switch_lock); | 
|  | return -EBUSY; | 
|  | } | 
|  | ret = srcu_notifier_chain_register( | 
|  | &cpufreq_transition_notifier_list, nb); | 
|  | if (!ret) | 
|  | cpufreq_fast_switch_count--; | 
|  |  | 
|  | mutex_unlock(&cpufreq_fast_switch_lock); | 
|  | break; | 
|  | case CPUFREQ_POLICY_NOTIFIER: | 
|  | ret = blocking_notifier_chain_register( | 
|  | &cpufreq_policy_notifier_list, nb); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_register_notifier); | 
|  |  | 
|  | /** | 
|  | *	cpufreq_unregister_notifier - unregister a driver with cpufreq | 
|  | *	@nb: notifier block to be unregistered | 
|  | *	@list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER | 
|  | * | 
|  | *	Remove a driver from the CPU frequency notifier list. | 
|  | * | 
|  | *	This function may sleep, and has the same return conditions as | 
|  | *	blocking_notifier_chain_unregister. | 
|  | */ | 
|  | int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (list) { | 
|  | case CPUFREQ_TRANSITION_NOTIFIER: | 
|  | mutex_lock(&cpufreq_fast_switch_lock); | 
|  |  | 
|  | ret = srcu_notifier_chain_unregister( | 
|  | &cpufreq_transition_notifier_list, nb); | 
|  | if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0)) | 
|  | cpufreq_fast_switch_count++; | 
|  |  | 
|  | mutex_unlock(&cpufreq_fast_switch_lock); | 
|  | break; | 
|  | case CPUFREQ_POLICY_NOTIFIER: | 
|  | ret = blocking_notifier_chain_unregister( | 
|  | &cpufreq_policy_notifier_list, nb); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_unregister_notifier); | 
|  |  | 
|  |  | 
|  | /********************************************************************* | 
|  | *                              GOVERNORS                            * | 
|  | *********************************************************************/ | 
|  |  | 
|  | /** | 
|  | * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch. | 
|  | * @policy: cpufreq policy to switch the frequency for. | 
|  | * @target_freq: New frequency to set (may be approximate). | 
|  | * | 
|  | * Carry out a fast frequency switch without sleeping. | 
|  | * | 
|  | * The driver's ->fast_switch() callback invoked by this function must be | 
|  | * suitable for being called from within RCU-sched read-side critical sections | 
|  | * and it is expected to select the minimum available frequency greater than or | 
|  | * equal to @target_freq (CPUFREQ_RELATION_L). | 
|  | * | 
|  | * This function must not be called if policy->fast_switch_enabled is unset. | 
|  | * | 
|  | * Governors calling this function must guarantee that it will never be invoked | 
|  | * twice in parallel for the same policy and that it will never be called in | 
|  | * parallel with either ->target() or ->target_index() for the same policy. | 
|  | * | 
|  | * Returns the actual frequency set for the CPU. | 
|  | * | 
|  | * If 0 is returned by the driver's ->fast_switch() callback to indicate an | 
|  | * error condition, the hardware configuration must be preserved. | 
|  | */ | 
|  | unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | target_freq = clamp_val(target_freq, policy->min, policy->max); | 
|  |  | 
|  | ret = cpufreq_driver->fast_switch(policy, target_freq); | 
|  | if (ret) | 
|  | cpufreq_times_record_transition(policy, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch); | 
|  |  | 
|  | /* Must set freqs->new to intermediate frequency */ | 
|  | static int __target_intermediate(struct cpufreq_policy *policy, | 
|  | struct cpufreq_freqs *freqs, int index) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | freqs->new = cpufreq_driver->get_intermediate(policy, index); | 
|  |  | 
|  | /* We don't need to switch to intermediate freq */ | 
|  | if (!freqs->new) | 
|  | return 0; | 
|  |  | 
|  | pr_debug("%s: cpu: %d, switching to intermediate freq: oldfreq: %u, intermediate freq: %u\n", | 
|  | __func__, policy->cpu, freqs->old, freqs->new); | 
|  |  | 
|  | cpufreq_freq_transition_begin(policy, freqs); | 
|  | ret = cpufreq_driver->target_intermediate(policy, index); | 
|  | cpufreq_freq_transition_end(policy, freqs, ret); | 
|  |  | 
|  | if (ret) | 
|  | pr_err("%s: Failed to change to intermediate frequency: %d\n", | 
|  | __func__, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __target_index(struct cpufreq_policy *policy, int index) | 
|  | { | 
|  | struct cpufreq_freqs freqs = {.old = policy->cur, .flags = 0}; | 
|  | unsigned int intermediate_freq = 0; | 
|  | unsigned int newfreq = policy->freq_table[index].frequency; | 
|  | int retval = -EINVAL; | 
|  | bool notify; | 
|  |  | 
|  | if (newfreq == policy->cur) | 
|  | return 0; | 
|  |  | 
|  | notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION); | 
|  | if (notify) { | 
|  | /* Handle switching to intermediate frequency */ | 
|  | if (cpufreq_driver->get_intermediate) { | 
|  | retval = __target_intermediate(policy, &freqs, index); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | intermediate_freq = freqs.new; | 
|  | /* Set old freq to intermediate */ | 
|  | if (intermediate_freq) | 
|  | freqs.old = freqs.new; | 
|  | } | 
|  |  | 
|  | freqs.new = newfreq; | 
|  | pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n", | 
|  | __func__, policy->cpu, freqs.old, freqs.new); | 
|  |  | 
|  | cpufreq_freq_transition_begin(policy, &freqs); | 
|  | } | 
|  |  | 
|  | retval = cpufreq_driver->target_index(policy, index); | 
|  | if (retval) | 
|  | pr_err("%s: Failed to change cpu frequency: %d\n", __func__, | 
|  | retval); | 
|  |  | 
|  | if (notify) { | 
|  | cpufreq_freq_transition_end(policy, &freqs, retval); | 
|  |  | 
|  | /* | 
|  | * Failed after setting to intermediate freq? Driver should have | 
|  | * reverted back to initial frequency and so should we. Check | 
|  | * here for intermediate_freq instead of get_intermediate, in | 
|  | * case we haven't switched to intermediate freq at all. | 
|  | */ | 
|  | if (unlikely(retval && intermediate_freq)) { | 
|  | freqs.old = intermediate_freq; | 
|  | freqs.new = policy->restore_freq; | 
|  | cpufreq_freq_transition_begin(policy, &freqs); | 
|  | cpufreq_freq_transition_end(policy, &freqs, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | int __cpufreq_driver_target(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq, | 
|  | unsigned int relation) | 
|  | { | 
|  | unsigned int old_target_freq = target_freq; | 
|  | int index; | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Make sure that target_freq is within supported range */ | 
|  | target_freq = clamp_val(target_freq, policy->min, policy->max); | 
|  |  | 
|  | pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n", | 
|  | policy->cpu, target_freq, relation, old_target_freq); | 
|  |  | 
|  | /* | 
|  | * This might look like a redundant call as we are checking it again | 
|  | * after finding index. But it is left intentionally for cases where | 
|  | * exactly same freq is called again and so we can save on few function | 
|  | * calls. | 
|  | */ | 
|  | if (target_freq == policy->cur) | 
|  | return 0; | 
|  |  | 
|  | /* Save last value to restore later on errors */ | 
|  | policy->restore_freq = policy->cur; | 
|  |  | 
|  | if (cpufreq_driver->target) | 
|  | return cpufreq_driver->target(policy, target_freq, relation); | 
|  |  | 
|  | if (!cpufreq_driver->target_index) | 
|  | return -EINVAL; | 
|  |  | 
|  | index = cpufreq_frequency_table_target(policy, target_freq, relation); | 
|  |  | 
|  | return __target_index(policy, index); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(__cpufreq_driver_target); | 
|  |  | 
|  | int cpufreq_driver_target(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq, | 
|  | unsigned int relation) | 
|  | { | 
|  | int ret = -EINVAL; | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  |  | 
|  | ret = __cpufreq_driver_target(policy, target_freq, relation); | 
|  |  | 
|  | up_write(&policy->rwsem); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_driver_target); | 
|  |  | 
|  | __weak struct cpufreq_governor *cpufreq_fallback_governor(void) | 
|  | { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int cpufreq_init_governor(struct cpufreq_policy *policy) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* Don't start any governor operations if we are entering suspend */ | 
|  | if (cpufreq_suspended) | 
|  | return 0; | 
|  | /* | 
|  | * Governor might not be initiated here if ACPI _PPC changed | 
|  | * notification happened, so check it. | 
|  | */ | 
|  | if (!policy->governor) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Platform doesn't want dynamic frequency switching ? */ | 
|  | if (policy->governor->dynamic_switching && | 
|  | cpufreq_driver->flags & CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING) { | 
|  | struct cpufreq_governor *gov = cpufreq_fallback_governor(); | 
|  |  | 
|  | if (gov) { | 
|  | pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n", | 
|  | policy->governor->name, gov->name); | 
|  | policy->governor = gov; | 
|  | } else { | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!try_module_get(policy->governor->owner)) | 
|  | return -EINVAL; | 
|  |  | 
|  | pr_debug("%s: for CPU %u\n", __func__, policy->cpu); | 
|  |  | 
|  | if (policy->governor->init) { | 
|  | ret = policy->governor->init(policy); | 
|  | if (ret) { | 
|  | module_put(policy->governor->owner); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cpufreq_exit_governor(struct cpufreq_policy *policy) | 
|  | { | 
|  | if (cpufreq_suspended || !policy->governor) | 
|  | return; | 
|  |  | 
|  | pr_debug("%s: for CPU %u\n", __func__, policy->cpu); | 
|  |  | 
|  | if (policy->governor->exit) | 
|  | policy->governor->exit(policy); | 
|  |  | 
|  | module_put(policy->governor->owner); | 
|  | } | 
|  |  | 
|  | static int cpufreq_start_governor(struct cpufreq_policy *policy) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (cpufreq_suspended) | 
|  | return 0; | 
|  |  | 
|  | if (!policy->governor) | 
|  | return -EINVAL; | 
|  |  | 
|  | pr_debug("%s: for CPU %u\n", __func__, policy->cpu); | 
|  |  | 
|  | if (cpufreq_driver->get && !cpufreq_driver->setpolicy) | 
|  | cpufreq_update_current_freq(policy); | 
|  |  | 
|  | if (policy->governor->start) { | 
|  | ret = policy->governor->start(policy); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (policy->governor->limits) | 
|  | policy->governor->limits(policy); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cpufreq_stop_governor(struct cpufreq_policy *policy) | 
|  | { | 
|  | if (cpufreq_suspended || !policy->governor) | 
|  | return; | 
|  |  | 
|  | pr_debug("%s: for CPU %u\n", __func__, policy->cpu); | 
|  |  | 
|  | if (policy->governor->stop) | 
|  | policy->governor->stop(policy); | 
|  | } | 
|  |  | 
|  | static void cpufreq_governor_limits(struct cpufreq_policy *policy) | 
|  | { | 
|  | if (cpufreq_suspended || !policy->governor) | 
|  | return; | 
|  |  | 
|  | pr_debug("%s: for CPU %u\n", __func__, policy->cpu); | 
|  |  | 
|  | if (policy->governor->limits) | 
|  | policy->governor->limits(policy); | 
|  | } | 
|  |  | 
|  | int cpufreq_register_governor(struct cpufreq_governor *governor) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (!governor) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&cpufreq_governor_mutex); | 
|  |  | 
|  | err = -EBUSY; | 
|  | if (!find_governor(governor->name)) { | 
|  | err = 0; | 
|  | list_add(&governor->governor_list, &cpufreq_governor_list); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&cpufreq_governor_mutex); | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_register_governor); | 
|  |  | 
|  | void cpufreq_unregister_governor(struct cpufreq_governor *governor) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!governor) | 
|  | return; | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return; | 
|  |  | 
|  | /* clear last_governor for all inactive policies */ | 
|  | read_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | for_each_inactive_policy(policy) { | 
|  | if (!strcmp(policy->last_governor, governor->name)) { | 
|  | policy->governor = NULL; | 
|  | strcpy(policy->last_governor, "\0"); | 
|  | } | 
|  | } | 
|  | read_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | mutex_lock(&cpufreq_governor_mutex); | 
|  | list_del(&governor->governor_list); | 
|  | mutex_unlock(&cpufreq_governor_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_unregister_governor); | 
|  |  | 
|  |  | 
|  | /********************************************************************* | 
|  | *                          POLICY INTERFACE                         * | 
|  | *********************************************************************/ | 
|  |  | 
|  | /** | 
|  | * cpufreq_get_policy - get the current cpufreq_policy | 
|  | * @policy: struct cpufreq_policy into which the current cpufreq_policy | 
|  | *	is written | 
|  | * | 
|  | * Reads the current cpufreq policy. | 
|  | */ | 
|  | int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *cpu_policy; | 
|  | if (!policy) | 
|  | return -EINVAL; | 
|  |  | 
|  | cpu_policy = cpufreq_cpu_get(cpu); | 
|  | if (!cpu_policy) | 
|  | return -EINVAL; | 
|  |  | 
|  | memcpy(policy, cpu_policy, sizeof(*policy)); | 
|  |  | 
|  | cpufreq_cpu_put(cpu_policy); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_get_policy); | 
|  |  | 
|  | /* | 
|  | * policy : current policy. | 
|  | * new_policy: policy to be set. | 
|  | */ | 
|  | static int cpufreq_set_policy(struct cpufreq_policy *policy, | 
|  | struct cpufreq_policy *new_policy) | 
|  | { | 
|  | struct cpufreq_governor *old_gov; | 
|  | int ret; | 
|  |  | 
|  | pr_debug("setting new policy for CPU %u: %u - %u kHz\n", | 
|  | new_policy->cpu, new_policy->min, new_policy->max); | 
|  |  | 
|  | memcpy(&new_policy->cpuinfo, &policy->cpuinfo, sizeof(policy->cpuinfo)); | 
|  |  | 
|  | /* | 
|  | * This check works well when we store new min/max freq attributes, | 
|  | * because new_policy is a copy of policy with one field updated. | 
|  | */ | 
|  | if (new_policy->min > new_policy->max) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* verify the cpu speed can be set within this limit */ | 
|  | ret = cpufreq_driver->verify(new_policy); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* adjust if necessary - all reasons */ | 
|  | blocking_notifier_call_chain(&cpufreq_policy_notifier_list, | 
|  | CPUFREQ_ADJUST, new_policy); | 
|  |  | 
|  | /* | 
|  | * verify the cpu speed can be set within this limit, which might be | 
|  | * different to the first one | 
|  | */ | 
|  | ret = cpufreq_driver->verify(new_policy); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* notification of the new policy */ | 
|  | blocking_notifier_call_chain(&cpufreq_policy_notifier_list, | 
|  | CPUFREQ_NOTIFY, new_policy); | 
|  |  | 
|  | policy->min = new_policy->min; | 
|  | policy->max = new_policy->max; | 
|  | trace_cpu_frequency_limits(policy); | 
|  |  | 
|  | arch_set_max_freq_scale(policy->cpus, policy->max); | 
|  |  | 
|  | policy->cached_target_freq = UINT_MAX; | 
|  |  | 
|  | pr_debug("new min and max freqs are %u - %u kHz\n", | 
|  | policy->min, policy->max); | 
|  |  | 
|  | if (cpufreq_driver->setpolicy) { | 
|  | policy->policy = new_policy->policy; | 
|  | pr_debug("setting range\n"); | 
|  | return cpufreq_driver->setpolicy(new_policy); | 
|  | } | 
|  |  | 
|  | if (new_policy->governor == policy->governor) { | 
|  | pr_debug("cpufreq: governor limits update\n"); | 
|  | cpufreq_governor_limits(policy); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | pr_debug("governor switch\n"); | 
|  |  | 
|  | /* save old, working values */ | 
|  | old_gov = policy->governor; | 
|  | /* end old governor */ | 
|  | if (old_gov) { | 
|  | cpufreq_stop_governor(policy); | 
|  | cpufreq_exit_governor(policy); | 
|  | } | 
|  |  | 
|  | /* start new governor */ | 
|  | policy->governor = new_policy->governor; | 
|  | ret = cpufreq_init_governor(policy); | 
|  | if (!ret) { | 
|  | ret = cpufreq_start_governor(policy); | 
|  | if (!ret) { | 
|  | pr_debug("cpufreq: governor change\n"); | 
|  | sched_cpufreq_governor_change(policy, old_gov); | 
|  | return 0; | 
|  | } | 
|  | cpufreq_exit_governor(policy); | 
|  | } | 
|  |  | 
|  | /* new governor failed, so re-start old one */ | 
|  | pr_debug("starting governor %s failed\n", policy->governor->name); | 
|  | if (old_gov) { | 
|  | policy->governor = old_gov; | 
|  | if (cpufreq_init_governor(policy)) | 
|  | policy->governor = NULL; | 
|  | else | 
|  | cpufreq_start_governor(policy); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	cpufreq_update_policy - re-evaluate an existing cpufreq policy | 
|  | *	@cpu: CPU which shall be re-evaluated | 
|  | * | 
|  | *	Useful for policy notifiers which have different necessities | 
|  | *	at different times. | 
|  | */ | 
|  | void cpufreq_update_policy(unsigned int cpu) | 
|  | { | 
|  | struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | 
|  | struct cpufreq_policy new_policy; | 
|  |  | 
|  | if (!policy) | 
|  | return; | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  |  | 
|  | if (policy_is_inactive(policy)) | 
|  | goto unlock; | 
|  |  | 
|  | pr_debug("updating policy for CPU %u\n", cpu); | 
|  | memcpy(&new_policy, policy, sizeof(*policy)); | 
|  | new_policy.min = policy->user_policy.min; | 
|  | new_policy.max = policy->user_policy.max; | 
|  |  | 
|  | /* | 
|  | * BIOS might change freq behind our back | 
|  | * -> ask driver for current freq and notify governors about a change | 
|  | */ | 
|  | if (cpufreq_driver->get && !cpufreq_driver->setpolicy) { | 
|  | if (cpufreq_suspended) | 
|  | goto unlock; | 
|  |  | 
|  | new_policy.cur = cpufreq_update_current_freq(policy); | 
|  | if (WARN_ON(!new_policy.cur)) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | cpufreq_set_policy(policy, &new_policy); | 
|  |  | 
|  | unlock: | 
|  | up_write(&policy->rwsem); | 
|  |  | 
|  | cpufreq_cpu_put(policy); | 
|  | } | 
|  | EXPORT_SYMBOL(cpufreq_update_policy); | 
|  |  | 
|  | /********************************************************************* | 
|  | *               BOOST						     * | 
|  | *********************************************************************/ | 
|  | static int cpufreq_boost_set_sw(int state) | 
|  | { | 
|  | struct cpufreq_policy *policy; | 
|  | int ret = -EINVAL; | 
|  |  | 
|  | for_each_active_policy(policy) { | 
|  | if (!policy->freq_table) | 
|  | continue; | 
|  |  | 
|  | ret = cpufreq_frequency_table_cpuinfo(policy, | 
|  | policy->freq_table); | 
|  | if (ret) { | 
|  | pr_err("%s: Policy frequency update failed\n", | 
|  | __func__); | 
|  | break; | 
|  | } | 
|  |  | 
|  | down_write(&policy->rwsem); | 
|  | policy->user_policy.max = policy->max; | 
|  | cpufreq_governor_limits(policy); | 
|  | up_write(&policy->rwsem); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int cpufreq_boost_trigger_state(int state) | 
|  | { | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  |  | 
|  | if (cpufreq_driver->boost_enabled == state) | 
|  | return 0; | 
|  |  | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | cpufreq_driver->boost_enabled = state; | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | ret = cpufreq_driver->set_boost(state); | 
|  | if (ret) { | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | cpufreq_driver->boost_enabled = !state; | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | pr_err("%s: Cannot %s BOOST\n", | 
|  | __func__, state ? "enable" : "disable"); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool cpufreq_boost_supported(void) | 
|  | { | 
|  | return likely(cpufreq_driver) && cpufreq_driver->set_boost; | 
|  | } | 
|  |  | 
|  | static int create_boost_sysfs_file(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = sysfs_create_file(cpufreq_global_kobject, &boost.attr); | 
|  | if (ret) | 
|  | pr_err("%s: cannot register global BOOST sysfs file\n", | 
|  | __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void remove_boost_sysfs_file(void) | 
|  | { | 
|  | if (cpufreq_boost_supported()) | 
|  | sysfs_remove_file(cpufreq_global_kobject, &boost.attr); | 
|  | } | 
|  |  | 
|  | int cpufreq_enable_boost_support(void) | 
|  | { | 
|  | if (!cpufreq_driver) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (cpufreq_boost_supported()) | 
|  | return 0; | 
|  |  | 
|  | cpufreq_driver->set_boost = cpufreq_boost_set_sw; | 
|  |  | 
|  | /* This will get removed on driver unregister */ | 
|  | return create_boost_sysfs_file(); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_enable_boost_support); | 
|  |  | 
|  | int cpufreq_boost_enabled(void) | 
|  | { | 
|  | return cpufreq_driver->boost_enabled; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_boost_enabled); | 
|  |  | 
|  | /********************************************************************* | 
|  | *               REGISTER / UNREGISTER CPUFREQ DRIVER                * | 
|  | *********************************************************************/ | 
|  | static enum cpuhp_state hp_online; | 
|  |  | 
|  | static int cpuhp_cpufreq_online(unsigned int cpu) | 
|  | { | 
|  | cpufreq_online(cpu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cpuhp_cpufreq_offline(unsigned int cpu) | 
|  | { | 
|  | cpufreq_offline(cpu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cpufreq_register_driver - register a CPU Frequency driver | 
|  | * @driver_data: A struct cpufreq_driver containing the values# | 
|  | * submitted by the CPU Frequency driver. | 
|  | * | 
|  | * Registers a CPU Frequency driver to this core code. This code | 
|  | * returns zero on success, -EEXIST when another driver got here first | 
|  | * (and isn't unregistered in the meantime). | 
|  | * | 
|  | */ | 
|  | int cpufreq_register_driver(struct cpufreq_driver *driver_data) | 
|  | { | 
|  | unsigned long flags; | 
|  | int ret; | 
|  |  | 
|  | if (cpufreq_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* | 
|  | * The cpufreq core depends heavily on the availability of device | 
|  | * structure, make sure they are available before proceeding further. | 
|  | */ | 
|  | if (!get_cpu_device(0)) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | if (!driver_data || !driver_data->verify || !driver_data->init || | 
|  | !(driver_data->setpolicy || driver_data->target_index || | 
|  | driver_data->target) || | 
|  | (driver_data->setpolicy && (driver_data->target_index || | 
|  | driver_data->target)) || | 
|  | (!!driver_data->get_intermediate != !!driver_data->target_intermediate)) | 
|  | return -EINVAL; | 
|  |  | 
|  | pr_debug("trying to register driver %s\n", driver_data->name); | 
|  |  | 
|  | /* Protect against concurrent CPU online/offline. */ | 
|  | cpus_read_lock(); | 
|  |  | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | if (cpufreq_driver) { | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  | ret = -EEXIST; | 
|  | goto out; | 
|  | } | 
|  | cpufreq_driver = driver_data; | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | if (driver_data->setpolicy) | 
|  | driver_data->flags |= CPUFREQ_CONST_LOOPS; | 
|  |  | 
|  | if (cpufreq_boost_supported()) { | 
|  | ret = create_boost_sysfs_file(); | 
|  | if (ret) | 
|  | goto err_null_driver; | 
|  | } | 
|  |  | 
|  | ret = subsys_interface_register(&cpufreq_interface); | 
|  | if (ret) | 
|  | goto err_boost_unreg; | 
|  |  | 
|  | if (!(cpufreq_driver->flags & CPUFREQ_STICKY) && | 
|  | list_empty(&cpufreq_policy_list)) { | 
|  | /* if all ->init() calls failed, unregister */ | 
|  | ret = -ENODEV; | 
|  | pr_debug("%s: No CPU initialized for driver %s\n", __func__, | 
|  | driver_data->name); | 
|  | goto err_if_unreg; | 
|  | } | 
|  |  | 
|  | ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN, | 
|  | "cpufreq:online", | 
|  | cpuhp_cpufreq_online, | 
|  | cpuhp_cpufreq_offline); | 
|  | if (ret < 0) | 
|  | goto err_if_unreg; | 
|  | hp_online = ret; | 
|  | ret = 0; | 
|  |  | 
|  | pr_debug("driver %s up and running\n", driver_data->name); | 
|  | goto out; | 
|  |  | 
|  | err_if_unreg: | 
|  | subsys_interface_unregister(&cpufreq_interface); | 
|  | err_boost_unreg: | 
|  | remove_boost_sysfs_file(); | 
|  | err_null_driver: | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  | cpufreq_driver = NULL; | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  | out: | 
|  | cpus_read_unlock(); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_register_driver); | 
|  |  | 
|  | /** | 
|  | * cpufreq_unregister_driver - unregister the current CPUFreq driver | 
|  | * | 
|  | * Unregister the current CPUFreq driver. Only call this if you have | 
|  | * the right to do so, i.e. if you have succeeded in initialising before! | 
|  | * Returns zero if successful, and -EINVAL if the cpufreq_driver is | 
|  | * currently not initialised. | 
|  | */ | 
|  | int cpufreq_unregister_driver(struct cpufreq_driver *driver) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!cpufreq_driver || (driver != cpufreq_driver)) | 
|  | return -EINVAL; | 
|  |  | 
|  | pr_debug("unregistering driver %s\n", driver->name); | 
|  |  | 
|  | /* Protect against concurrent cpu hotplug */ | 
|  | cpus_read_lock(); | 
|  | subsys_interface_unregister(&cpufreq_interface); | 
|  | remove_boost_sysfs_file(); | 
|  | cpuhp_remove_state_nocalls_cpuslocked(hp_online); | 
|  |  | 
|  | write_lock_irqsave(&cpufreq_driver_lock, flags); | 
|  |  | 
|  | cpufreq_driver = NULL; | 
|  |  | 
|  | write_unlock_irqrestore(&cpufreq_driver_lock, flags); | 
|  | cpus_read_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); | 
|  |  | 
|  | struct kobject *cpufreq_global_kobject; | 
|  | EXPORT_SYMBOL(cpufreq_global_kobject); | 
|  |  | 
|  | static int __init cpufreq_core_init(void) | 
|  | { | 
|  | if (cpufreq_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj); | 
|  | BUG_ON(!cpufreq_global_kobject); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | module_param(off, int, 0444); | 
|  | core_initcall(cpufreq_core_init); |