[API-1074][wifi][bcmdhd]modify bcmdhd ver 100_10_96 from NO-connman branch

Change-Id: Ia20660d0f7f0d09ac999a174150710b807357048
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/Makefile b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/Makefile
index bbfd16e..00b81ea 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/Makefile
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/Makefile
@@ -39,7 +39,7 @@
 	-DGET_CUSTOM_MAC_ENABLE      \
 	-DSEC_ENHANCEMENT -DDHD_FW_COREDUMP -DCHIPS_CUSTOMER_HW6	\
 	-DDHD_RND_DEBUG -DDHD_DUMP_FILE_WRITE_FROM_KERNEL		\
-	-DDHD_DONOT_FORWARD_BCMEVENT_AS_NETWORK_PKT
+	-DDHD_DONOT_FORWARD_BCMEVENT_AS_NETWORK_PKT -DWL11AX
 
 GCCVERSIONGTEQ9 := $(shell expr `$(CROSS_COMPILE)gcc -dumpversion | cut -f1 -d.` \>= 9)
 ifeq "$(GCCVERSIONGTEQ9)" "1"
@@ -276,7 +276,7 @@
 
 #802.11ax and 6Ghz Support
 ifeq ($(CONFIG_BCMDHD_WIFI6_6E),y)
- DHDCFLAGS += -DWL11AX
+# DHDCFLAGS += -DWL11AX
  DHDCFLAGS += -DWL_6E
 endif
 
@@ -528,6 +528,7 @@
 #qs.xiong
 DHDCFLAGS += -Wno-array-bounds -Wno-sizeof-pointer-memaccess -Wno-unused-function
 
+
 ifeq ($(DRIVER_TYPE),y)
   DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
   DHDCFLAGS += -DUSE_LATE_INITCALL_SYNC
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/aiutils.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/aiutils.c
old mode 100755
new mode 100644
index 798fd10..328f836
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/aiutils.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/aiutils.c
@@ -2,9 +2,9 @@
  * Misc utility routines for accessing chip-specific features
  * of the SiliconBackplane-based Broadcom chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcm_app_utils.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcm_app_utils.c
old mode 100755
new mode 100644
index 393e132..ec4b9dc
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcm_app_utils.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcm_app_utils.c
@@ -3,9 +3,9 @@
  * Contents are wifi-specific, used by any kernel or app-level
  * software that might want wifi things as it grows.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmevent.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmevent.c
old mode 100755
new mode 100644
index 8f0c74c..1e5a250
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmevent.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmevent.c
@@ -1,9 +1,9 @@
 /*
  * bcmevent read-only data shared by kernel or app layers
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh.c
index 540ea20..f27c1c2 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh.c
@@ -2,9 +2,9 @@
  *  BCMSDH interface glue
  *  implement bcmsdh API for SDIOH driver
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c
old mode 100755
new mode 100644
index a0bee0c..ede9593
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c
@@ -1,9 +1,9 @@
 /*
  * BCMSDH Function Driver for the native SDIO/MMC driver in the Linux Kernel
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd.c
old mode 100755
new mode 100644
index 193d12a..104b3c3
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd.c
@@ -1,9 +1,9 @@
 /*
  *  'Standard' SDIO HOST CONTROLLER driver
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd_linux.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd_linux.c
old mode 100755
new mode 100644
index 4b5cfbb..0d39c6d
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd_linux.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmsdstd_linux.c
@@ -1,9 +1,9 @@
 /*
  *  'Standard' SDIO HOST CONTROLLER driver - linux portion
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmspibrcm.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmspibrcm.c
old mode 100755
new mode 100644
index 354bd04..c7ba27b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmspibrcm.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmspibrcm.c
@@ -1,9 +1,9 @@
 /*
  * Broadcom BCMSDH to gSPI Protocol Conversion Layer
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmstdlib_s.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmstdlib_s.c
old mode 100755
new mode 100644
index 9ce39cf..12d8984
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmstdlib_s.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmstdlib_s.c
@@ -1,9 +1,9 @@
 /*
  * Broadcom Secure Standard Library.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmwifi_rates.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmwifi_rates.h
old mode 100755
new mode 100644
index d843770..8603d61
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmwifi_rates.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/bcmwifi_rates.h
@@ -1,9 +1,9 @@
 /*
  * Indices for 802.11 a/b/g/n/ac 1-3 chain symmetric transmit rates
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd.h
index 3d4c29e..3d14f18 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd.h
@@ -41,6 +41,7 @@
 
 #undef CONFIG_PM_WAKELOCKS
 
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.c
old mode 100755
new mode 100644
index a656cd8..55395e0
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.c
@@ -4,9 +4,9 @@
  * Feature by which dualband capable PEERs will be
  * forced move on 5GHz interface
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.h
old mode 100755
new mode 100644
index 7b2ef3d..94ef3b6
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bandsteer.h
@@ -4,9 +4,9 @@
  * Feature by which dualband capable PEERs will be
  * forced move on 5GHz interface
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bt_interface.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bt_interface.h
index bc33423..fda4426 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bt_interface.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bt_interface.h
@@ -1,9 +1,9 @@
 /*
  *
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bus.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bus.h
old mode 100755
new mode 100644
index 78324a9..bcdb19d
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bus.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_bus.h
@@ -4,9 +4,9 @@
  * Provides type definitions and function prototypes used to link the
  * DHD OS, bus, and protocol modules.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -233,6 +233,8 @@
 extern int dhdpcie_get_pcieirq(struct dhd_bus *bus, unsigned int *irq);
 extern void dhd_bus_aer_config(struct dhd_bus *bus);
 
+extern struct device * dhd_bus_to_dev(struct dhd_bus *bus);
+
 extern int dhdpcie_cto_init(struct dhd_bus *bus, bool enable);
 extern int dhdpcie_cto_cfg_init(struct dhd_bus *bus, bool enable);
 
@@ -252,8 +254,6 @@
 extern void dhd_bus_handle_mb_data(struct dhd_bus *bus, uint32 d2h_mb_data);
 #endif /* BCMPCIE */
 
-extern struct device * dhd_bus_to_dev(struct dhd_bus *bus);
-
 /* dump the device trap informtation  */
 extern void dhd_bus_dump_trap_info(struct dhd_bus *bus, struct bcmstrbuf *b);
 extern void dhd_bus_copy_trap_sig(struct dhd_bus *bus,  trap_t *tr);
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_buzzz.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_buzzz.h
old mode 100755
new mode 100644
index db7320a..3db6a7f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_buzzz.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_buzzz.h
@@ -3,9 +3,9 @@
 
 /*
  * Broadcom logging system - Empty implementaiton
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.c
old mode 100755
new mode 100644
index d29fb9d..08ccaf5
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.c
@@ -1,9 +1,9 @@
 /*
  * Linux cfg80211 driver - Dongle Host Driver (DHD) related
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.h
old mode 100755
new mode 100644
index 6528673..2c5d7b9
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_cfg80211.h
@@ -1,9 +1,9 @@
 /*
  * Linux cfg80211 driver - Dongle Host Driver (DHD) related
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_gpio.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_gpio.c
old mode 100755
new mode 100644
index c05705e..ebf234c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_gpio.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_gpio.c
@@ -1,9 +1,9 @@
 /*
  * Customer code to add GPIO control during WLAN start/stop
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_memprealloc.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_memprealloc.c
old mode 100755
new mode 100644
index 76a9342..810e83c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_memprealloc.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_memprealloc.c
@@ -1,9 +1,9 @@
 /*
  * Platform Dependent file for usage of Preallocted Memory
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_msm.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_msm.c
old mode 100755
new mode 100644
index bde5094..453b371
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_msm.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_custom_msm.c
@@ -1,9 +1,9 @@
 /*
  * Platform Dependent file for Qualcomm MSM/APQ
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.c
old mode 100755
new mode 100644
index 2cddcb3..12f9ad8
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.c
@@ -3,9 +3,9 @@
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.h
old mode 100755
new mode 100644
index c80b05a..26b9f65
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_dbg_ring.h
@@ -3,9 +3,9 @@
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug.h
old mode 100755
new mode 100644
index 520ad1b..2839305
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug.h
@@ -3,9 +3,9 @@
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug_linux.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug_linux.c
old mode 100755
new mode 100644
index 2b4f2c7..70ef894
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug_linux.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_debug_linux.c
@@ -3,9 +3,9 @@
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.c
old mode 100755
new mode 100644
index 872c14b..c02095f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.c
@@ -4,9 +4,9 @@
  * Flow rings are transmit traffic (=propagating towards antenna) related entities
  *
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.h
old mode 100755
new mode 100644
index 2ff9e2c..dd61e35
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_flowring.h
@@ -6,9 +6,9 @@
  * Provides type definitions and function prototypes used to create, delete and manage flow rings at
  * high level.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.c
old mode 100755
new mode 100644
index 2a151ae..78aaa38
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.c
@@ -1,9 +1,9 @@
 /*
  * IP Packet Parser Module.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.h
old mode 100755
new mode 100644
index ba8a13a..640aa93
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_ip.h
@@ -3,9 +3,9 @@
  *
  * Provides type definitions and function prototypes used to parse ip packet.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.c
index 17fb149..66c829d 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.c
@@ -12406,7 +12406,6 @@
 	net->netdev_ops = &dhd_ops_virt;
 
 	/* Ok, link into the network layer... */
-	DHD_ERROR(("%s , ifidx: %d\n", __FUNCTION__, ifidx));
 	if (ifidx == 0) {
 		/*
 		 * device functions for the primary interface only
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.h
index 8cc1020..53a727a 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux.h
@@ -1,9 +1,9 @@
 /*
  * DHD Linux header file (dhd_linux exports for cfg80211 and other components)
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_exportfs.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_exportfs.c
index d0f69b9..9e96728 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_exportfs.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_exportfs.c
@@ -2,9 +2,9 @@
  * Broadcom Dongle Host Driver (DHD), Linux-specific network interface
  * Basically selected code segments from usb-cdc.c and usb-rndis.c
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.c
old mode 100755
new mode 100644
index 5240d0e..50c61f6
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.c
@@ -1,9 +1,9 @@
 /*
  * Packet dump helper functions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.h
old mode 100755
new mode 100644
index d5f35fa..e06487f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_pktdump.h
@@ -1,9 +1,9 @@
 /*
  * Header file for the Packet dump helper functions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_platdev.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_platdev.c
old mode 100755
new mode 100644
index bdd0b5b..ee49f34
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_platdev.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_platdev.c
@@ -1,9 +1,9 @@
 /*
  * Linux platform device for DHD WLAN adapter
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_priv.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_priv.h
index 8ce97fc..ca80439 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_priv.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_priv.h
@@ -57,6 +57,10 @@
 #include <linux/firmware.h>
 #endif	/* DHD_SUPPORT_REQFW_FOR_EVTLOG || DHD_SUPPORT_REQFW_FOR_FIRMWARE_DOWNLOADING */
 
+#if defined(CONFIG_PM_WAKELOCKS)
+#undef CONFIG_PM_WAKELOCKS
+#endif
+
 /*
  * Do not include this header except for the dhd_linux.c dhd_linux_sysfs.c
  * Local private structure (extension of pub)
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_sched.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_sched.c
index 9e7b5ba..6cc377d 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_sched.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_sched.c
@@ -1,9 +1,9 @@
 /*
  * Expose some of the kernel scheduler routines
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.c
old mode 100755
new mode 100644
index d35b47b..54de6a7
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.c
@@ -2,9 +2,9 @@
  * Broadcom Dongle Host Driver (DHD), Generic work queue framework
  * Generic interface to handle dhd deferred work events
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.h
old mode 100755
new mode 100644
index 6874ada..ddbdd42
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_linux_wq.h
@@ -2,9 +2,9 @@
  * Broadcom Dongle Host Driver (DHD), Generic work queue framework
  * Generic interface to handle dhd deferred work events
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.c
old mode 100755
new mode 100644
index 95738de..71f77a4
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.c
@@ -3,9 +3,9 @@
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.h
old mode 100755
new mode 100644
index 2a0b36f..76e32f5
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_mschdbg.h
@@ -3,9 +3,9 @@
  *
  * <<Broadcom-WL-IPTag/Open:>>
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_msgbuf.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_msgbuf.c
index 3e0a0d4..26638d4 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_msgbuf.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_msgbuf.c
@@ -3,9 +3,9 @@
  * Provides type definitions and function prototypes used to link the
  * DHD OS, bus, and protocol modules.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pcie.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pcie.h
old mode 100755
new mode 100644
index 23e2aa2..d2e00f4
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pcie.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pcie.h
@@ -1,9 +1,9 @@
 /*
  * Linux DHD Bus Module for PCIE
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.c
index afbbcc7..37f88d4 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.c
@@ -2,9 +2,9 @@
  * Broadcom Dongle Host Driver (DHD)
  * Prefered Network Offload and Wi-Fi Location Service(WLS) code.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.h
old mode 100755
new mode 100644
index ecb560e..2c5b4f3
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_pno.h
@@ -2,9 +2,9 @@
  * Header file of Broadcom Dongle Host Driver (DHD)
  * Prefered Network Offload code and Wi-Fi Location Service(WLS) code.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_proto.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_proto.h
old mode 100755
new mode 100644
index 3311a0f..a339232
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_proto.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_proto.h
@@ -4,9 +4,9 @@
  * Provides type definitions and function prototypes used to link the
  * DHD OS, bus, and protocol modules.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.c
old mode 100755
new mode 100644
index 67b81bd..87f2f97
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.c
@@ -1,9 +1,9 @@
 /*
  * Broadcom Dongle Host Driver (DHD), RTT
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.h
old mode 100755
new mode 100644
index a1a665f..0e2d0e6
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_rtt.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom Dongle Host Driver (DHD), RTT
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.c
old mode 100755
new mode 100644
index 5032485..0005403
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.c
@@ -1,9 +1,9 @@
 /*
  * DHD PROP_TXSTATUS Module.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.h
old mode 100755
new mode 100644
index 12533ee..5a223f5
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dhd_wlfc.h
@@ -1,7 +1,7 @@
 /*
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_stats.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_stats.h
old mode 100755
new mode 100644
index 7bc8feb..faad142
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_stats.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_stats.h
@@ -2,9 +2,9 @@
  * Common stats definitions for clients of dongle
  * ports
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_wlhdr.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_wlhdr.h
old mode 100755
new mode 100644
index e15b397..a6b5c0a
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_wlhdr.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/dngl_wlhdr.h
@@ -1,9 +1,9 @@
 /*
  * Dongle WL Header definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.c
old mode 100755
new mode 100644
index 0e5b5af..3615cff
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.c
@@ -2,9 +2,9 @@
  * IE/TLV fragmentation/defragmentation support for
  * Broadcom 802.11bang Networking Device Driver
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.h
old mode 100755
new mode 100644
index 730dfc7..aa5d7fc
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/frag.h
@@ -2,9 +2,9 @@
  * IE/TLV (de)fragmentation declarations/definitions for
  * Broadcom 802.11abgn Networking Device Driver
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktpool.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktpool.c
old mode 100755
new mode 100644
index e95a89d..f54c7c2
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktpool.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktpool.c
@@ -1,9 +1,9 @@
 /*
  * HND generic packet pool operation primitives
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktq.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktq.c
old mode 100755
new mode 100644
index 2969e86..c325a37
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktq.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hnd_pktq.c
@@ -1,9 +1,9 @@
 /*
  * HND generic pktq operation primitives
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndlhl.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndlhl.c
old mode 100755
new mode 100644
index 926fff5..f220e84
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndlhl.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndlhl.c
@@ -2,9 +2,9 @@
  * Misc utility routines for accessing lhl specific features
  * of the SiliconBackplane-based Broadcom chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndmem.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndmem.c
old mode 100755
new mode 100644
index a698caa..d6213f4
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndmem.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndmem.c
@@ -1,9 +1,9 @@
 /*
  * Utility routines for configuring different memories in Broadcom chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndpmu.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndpmu.c
old mode 100755
new mode 100644
index 0e12c9d..7a4fd28
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndpmu.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/hndpmu.c
@@ -2,9 +2,9 @@
  * Misc utility routines for accessing PMU corerev specific features
  * of the SiliconBackplane-based Broadcom chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git "a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/20230329_updated_nl80211 \0501\051.h" "b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/20230329_updated_nl80211 \0501\051.h"
deleted file mode 100755
index 1e47749..0000000
--- "a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/20230329_updated_nl80211 \0501\051.h"
+++ /dev/null
@@ -1,6127 +0,0 @@
-#ifndef __LINUX_NL80211_H
-#define __LINUX_NL80211_H
-/*
- * 802.11 netlink interface public header
- *
- * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <m@bues.ch>
- * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-/*
- * This header file defines the userspace API to the wireless stack. Please
- * be careful not to break things - i.e. don't move anything around or so
- * unless you can demonstrate that it breaks neither API nor ABI.
- *
- * Additions to the API should be accompanied by actual implementations in
- * an upstream driver, so that example implementations exist in case there
- * are ever concerns about the precise semantics of the API or changes are
- * needed, and to ensure that code for dead (no longer implemented) API
- * can actually be identified and removed.
- * Nonetheless, semantics should also be documented carefully in this file.
- */
-
-#include <linux/types.h>
-
-#define NL80211_GENL_NAME "nl80211"
-
-#define NL80211_MULTICAST_GROUP_CONFIG		"config"
-#define NL80211_MULTICAST_GROUP_SCAN		"scan"
-#define NL80211_MULTICAST_GROUP_REG		"regulatory"
-#define NL80211_MULTICAST_GROUP_MLME		"mlme"
-#define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
-#define NL80211_MULTICAST_GROUP_NAN		"nan"
-#define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
-
-/**
- * DOC: Station handling
- *
- * Stations are added per interface, but a special case exists with VLAN
- * interfaces. When a station is bound to an AP interface, it may be moved
- * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
- * The station is still assumed to belong to the AP interface it was added
- * to.
- *
- * Station handling varies per interface type and depending on the driver's
- * capabilities.
- *
- * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
- * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
- *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
- *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
- *    to add rate and capability information to the station and at the same
- *    time mark it authorized.
- *  - %NL80211_TDLS_ENABLE_LINK is then used
- *  - after this, the only valid operation is to remove it by tearing down
- *    the TDLS link (%NL80211_TDLS_DISABLE_LINK)
- *
- * TODO: need more info for other interface types
- */
-
-/**
- * DOC: Frame transmission/registration support
- *
- * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
- * that are not being handled by the kernel. This includes, for example,
- * certain classes of action frames that cannot be handled in the kernel
- * for various reasons.
- *
- * Frame registration is done on a per-interface basis and registrations
- * cannot be removed other than by closing the socket. It is possible to
- * specify a registration filter to register, for example, only for a
- * certain type of action frame. In particular with action frames, those
- * that userspace registers for will not be returned as unhandled by the
- * driver, so that the registered application has to take responsibility
- * for doing that.
- *
- * The type of frame that can be registered for is also dependent on the
- * driver and interface type. The frame types are advertised in wiphy
- * attributes so applications know what to expect.
- *
- * NOTE: When an interface changes type while registrations are active,
- *       these registrations are ignored until the interface type is
- *       changed again. This means that changing the interface type can
- *       lead to a situation that couldn't otherwise be produced, but
- *       any such registrations will be dormant in the sense that they
- *       will not be serviced, i.e. they will not receive any frames.
- *
- * Frame transmission allows userspace to send for example the required
- * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
- * status is indicated to the sending socket.
- *
- * For more technical details, see the corresponding command descriptions
- * below.
- */
-
-/**
- * DOC: Virtual interface / concurrency capabilities
- *
- * Some devices are able to operate with virtual MACs, they can have
- * more than one virtual interface. The capability handling for this
- * is a bit complex though, as there may be a number of restrictions
- * on the types of concurrency that are supported.
- *
- * To start with, each device supports the interface types listed in
- * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
- * types there no concurrency is implied.
- *
- * Once concurrency is desired, more attributes must be observed:
- * To start with, since some interface types are purely managed in
- * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
- * are only restricted by some semantic restrictions (e.g. AP-VLAN
- * cannot be added without a corresponding AP interface). This list
- * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
- *
- * Further, the list of supported combinations is exported. This is
- * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
- * it exports a list of "groups", and at any point in time the
- * interfaces that are currently active must fall into any one of
- * the advertised groups. Within each group, there are restrictions
- * on the number of interfaces of different types that are supported
- * and also the number of different channels, along with potentially
- * some other restrictions. See &enum nl80211_if_combination_attrs.
- *
- * All together, these attributes define the concurrency of virtual
- * interfaces that a given device supports.
- */
-
-/**
- * DOC: packet coalesce support
- *
- * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
- * packets does not do anything with these packets. Therefore the
- * reception of these unwanted packets causes unnecessary processing
- * and power consumption.
- *
- * Packet coalesce feature helps to reduce number of received interrupts
- * to host by buffering these packets in firmware/hardware for some
- * predefined time. Received interrupt will be generated when one of the
- * following events occur.
- * a) Expiration of hardware timer whose expiration time is set to maximum
- * coalescing delay of matching coalesce rule.
- * b) Coalescing buffer in hardware reaches it's limit.
- * c) Packet doesn't match any of the configured coalesce rules.
- *
- * User needs to configure following parameters for creating a coalesce
- * rule.
- * a) Maximum coalescing delay
- * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
- * Multiple such rules can be created.
- */
-
-/**
- * DOC: WPA/WPA2 EAPOL handshake offload
- *
- * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
- * can indicate they support offloading EAPOL handshakes for WPA/WPA2
- * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
- * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
- * this offload may reject the %NL80211_CMD_CONNECT when no preshared
- * key material is provided, for example when that driver does not
- * support setting the temporal keys through %CMD_NEW_KEY.
- *
- * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
- * set by drivers indicating offload support of the PTK/GTK EAPOL
- * handshakes during 802.1X authentication. In order to use the offload
- * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
- * attribute flag. Drivers supporting this offload may reject the
- * %NL80211_CMD_CONNECT when the attribute flag is not present.
- *
- * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
- * using %NL80211_CMD_SET_PMK. For offloaded FT support also
- * %NL80211_ATTR_PMKR0_NAME must be provided.
- */
-
-/**
- * DOC: FILS shared key authentication offload
- *
- * FILS shared key authentication offload can be advertized by drivers by
- * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
- * FILS shared key authentication offload should be able to construct the
- * authentication and association frames for FILS shared key authentication and
- * eventually do a key derivation as per IEEE 802.11ai. The below additional
- * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
- * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
- *	%NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
- *	%NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
- *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
- *	%NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
- * rIK should be used to generate an authentication tag on the ERP message and
- * rMSK should be used to derive a PMKSA.
- * rIK, rMSK should be generated and keyname_nai, sequence number should be used
- * as specified in IETF RFC 6696.
- *
- * When FILS shared key authentication is completed, driver needs to provide the
- * below additional parameters to userspace, which can be either after setting
- * up a connection or after roaming.
- *	%NL80211_ATTR_FILS_KEK - used for key renewal
- *	%NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
- *	%NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
- *	%Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
- * The PMKSA can be maintained in userspace persistently so that it can be used
- * later after reboots or wifi turn off/on also.
- *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
- * capable AP supporting PMK caching. It specifies the scope within which the
- * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
- * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
- * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
- * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
- * use in a FILS shared key connection with PMKSA caching.
- */
-
-/**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
- *
- * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
- *	to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
- *	attributes determining the channel width; this is used for setting
- *	monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- *	instead, the support here is for backward compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- *	%NL80211_ATTR_WIPHY_NAME.
- * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- *	either a dump request for all interfaces or a specific get with a
- *	single %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
- *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
- *	be sent from userspace to request creation of a new virtual interface,
- *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
- *	%NL80211_ATTR_IFNAME.
- * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
- *	userspace to request deletion of a virtual interface, then requires
- *	attribute %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
- *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
- *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
- * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
- *	and %NL80211_ATTR_KEY_SEQ attributes.
- * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
- *	or %NL80211_ATTR_MAC.
- *
- * @NL80211_CMD_GET_BEACON: (not used)
- * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
- *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
- *	attributes. For drivers that generate the beacon and probe responses
- *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
- *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
- *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
- *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
- *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
- *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
- *	The channel to use can be set on the interface or be given using the
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
- *
- * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all stations, on the interface identified
- *	by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
- *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
- *	of disconnection indication should be sent to the station
- *	(Deauthentication or Disassociation frame and reason code for that
- *	frame).
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
- *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
- * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
- *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
- *	%NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- *	regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
- *	has a private regulatory domain, it will be returned. Otherwise, the
- *	global regdomain will be returned.
- *	A device will have a private regulatory domain if it uses the
- *	regulatory_hint() API. Even when a private regdomain is used the channel
- *	information will still be mended according to further hints from
- *	the regulatory core to help with compliance. A dump version of this API
- *	is now available which will returns the global regdomain as well as
- *	all private regdomains of present wiphys (for those that have it).
- *	If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
- *	its private regdomain is the only valid one for it. The regulatory
- *	core is not used to help with compliance in this case.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- *	after being queried by the kernel. CRDA replies by sending a regulatory
- *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
- *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
- * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
- *
- * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
- *	interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
- *      interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
- *	interface is identified with %NL80211_ATTR_IFINDEX and the management
- *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
- *	added to the end of the specified management frame is specified with
- *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
- *	added to all specified management frames generated by
- *	kernel/firmware/driver.
- *	Note: This command has been removed and it is only reserved at this
- *	point to avoid re-using existing command number. The functionality this
- *	command was planned for has been provided with cleaner design with the
- *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
- *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_CMD_GET_SCAN: get scan results
- * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
- *	specify a BSSID to scan for; if not included, the wildcard BSSID will
- *	be used.
- * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
- *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
- * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
- *	partial scan results may be available
- *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals and certain number of cycles, as specified by
- *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
- *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
- *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
- *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
- *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
- *	If for some reason scheduled scan is aborted by the driver, all scan
- *	plans are canceled (including scan plans that did not start yet).
- *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
- *	are passed, they are used in the probe requests.  For
- *	broadcast, a broadcast SSID must be passed (ie. an empty
- *	string).  If no SSID is passed, no probe requests are sent and
- *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
- *	if passed, define which channels should be scanned; if not
- *	passed, all channels allowed for the current regulatory domain
- *	are used.  Extra IEs can also be passed from the userspace by
- *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
- *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- *	is supplied. If the device supports multiple concurrent scheduled
- *	scans, it will allow such when the caller provides the flag attribute
- *	%NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
- *	scheduled scan is not running. The caller may assume that as soon
- *	as the call returns, it is safe to start a new scheduled scan again.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- *	results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
- *	stopped.  The driver may issue this event at any time during a
- *	scheduled scan.  One reason for stopping the scan is if the hardware
- *	does not support starting an association or a normal scan while running
- *	a scheduled scan.  This event is also sent when the
- *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
- *	is brought down while a scheduled scan was running.
- *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
- *      or noise level
- * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
- *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
- *
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
- *	(for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
- *	(PMK is used for PTKSA derivation in case of FILS shared key offload) or
- *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
- *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
- *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
- *	ESS.
- * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
- * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
- *
- * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
- * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
- *
- * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
- *	This command is used both as a command (request to authenticate) and
- *	as an event on the "mlme" multicast group indicating completion of the
- *	authentication process.
- *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
- *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- *	to be added to the frame.
- *	When used as an event, this reports reception of an Authentication
- *	frame in station and IBSS modes when the local MLME processed the
- *	frame, i.e., it was for the local STA and was received in correct
- *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
- *	MLME SAP interface (kernel providing MLME, userspace SME). The
- *	included %NL80211_ATTR_FRAME attribute contains the management frame
- *	(including both the header and frame body, but not FCS). This event is
- *	also used to indicate if the authentication attempt timed out. In that
- *	case the %NL80211_ATTR_FRAME attribute is replaced with a
- *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
- *	pending authentication timed out).
- * @NL80211_CMD_ASSOCIATE: association request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
- *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
- *	%NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
- *	request is for the initial association to an ESS (that attribute not
- *	included) or for reassociation within the ESS (that attribute is
- *	included).
- * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
- *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
- *	primitives).
- * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
- *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
- *
- * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
- *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
- *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
- *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
- *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
- *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
- *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
- *
- * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
- *	FREQ attribute (for the initial frequency if no peer can be found)
- *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
- *	should be fixed rather than automatically determined. Can only be
- *	executed on a network interface that is UP, and fixed BSSID/FREQ
- *	may be rejected. Another optional parameter is the beacon interval,
- *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
- *	given defaults to 100 TU (102.4ms).
- * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
- *	determined by the network interface.
- *
- * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
- *	to identify the device, and the TESTDATA blob attribute to pass through
- *	to the driver.
- *
- * @NL80211_CMD_CONNECT: connection request and notification; this command
- *	requests to connect to a specified network but without separating
- *	auth and assoc steps. For this, you need to specify the SSID in a
- *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
- *	%NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
- *	%NL80211_ATTR_WIPHY_FREQ_HINT.
- *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
- *	restrictions on BSS selection, i.e., they effectively prevent roaming
- *	within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
- *	can be included to provide a recommendation of the initial BSS while
- *	allowing the driver to roam to other BSSes within the ESS and also to
- *	ignore this recommendation if the indicated BSS is not ideal. Only one
- *	set of BSSID,frequency parameters is used (i.e., either the enforcing
- *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
- *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
- *	%NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
- *	the ESS in case the device is already associated and an association with
- *	a different BSS is desired.
- *	Background scan period can optionally be
- *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- *	if not specified default background scan configuration
- *	in driver is used and if period value is 0, bg scan will be disabled.
- *	This attribute is ignored if driver does not support roam scan.
- *	It is also sent as an event, with the BSSID and response IEs when the
- *	connection is established or failed to be established. This can be
- *	determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
- *	non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
- *	event, the connection attempt failed due to not being able to initiate
- *	authentication/association or not receiving a response from the AP.
- *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
- *	well to remain backwards compatible.
- *	When establishing a security association, drivers that support 4 way
- *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
- *	the 4 way handshake is completed successfully.
- * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
- *	When a security association was established with the new AP (e.g. if
- *	the FT protocol was used for roaming or the driver completed the 4 way
- *	handshake), this event should be followed by an
- *	%NL80211_CMD_PORT_AUTHORIZED event.
- * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
- *	userspace that a connection was dropped by the AP or due to other
- *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
- *	%NL80211_ATTR_REASON_CODE attributes are used.
- *
- * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
- *	associated with this wiphy must be down and will follow.
- *
- * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
- *	channel for the specified amount of time. This can be used to do
- *	off-channel operations like transmit a Public Action frame and wait for
- *	a response while being associated to an AP on another channel.
- *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- *	frequency for the operation.
- *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- *	to remain on the channel. This command is also used as an event to
- *	notify when the requested duration starts (it may take a while for the
- *	driver to schedule this time due to other concurrent needs for the
- *	radio).
- *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
- *	that will be included with any events pertaining to this request;
- *	the cookie is also used to cancel the request.
- * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
- *	pending remain-on-channel duration if the desired operation has been
- *	completed prior to expiration of the originally requested duration.
- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
- *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
- *	uniquely identify the request.
- *	This command is also used as an event to notify when a requested
- *	remain-on-channel duration has expired.
- *
- * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
- *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
- *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
- *
- * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
- *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
- *	requires an interface index, a frame type attribute (optional for
- *	backward compatibility reasons, if not given assumes action frames)
- *	and a match attribute containing the first few bytes of the frame
- *	that should match, e.g. a single byte for only a category match or
- *	four bytes for vendor frames including the OUI. The registration
- *	cannot be dropped, but is removed automatically when the netlink
- *	socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- *	backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
- *	command is used both as a request to transmit a management frame and
- *	as an event indicating reception of a frame that was not processed in
- *	kernel code, but is for us (i.e., which may need to be processed in a
- *	user space application). %NL80211_ATTR_FRAME is used to specify the
- *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
- *	to indicate on which channel the frame is to be transmitted or was
- *	received. If this channel is not the current channel (remain-on-channel
- *	or the operational channel) the device will switch to the given channel
- *	and transmit the frame, optionally waiting for a response for the time
- *	specified using %NL80211_ATTR_DURATION. When called, this operation
- *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
- *	TX status event pertaining to the TX request.
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	management frames at CCK rate or not in 2GHz band.
- *	%NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
- *	counters which will be updated to the current value. This attribute
- *	is used during CSA period.
- * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
- *	command may be used with the corresponding cookie to cancel the wait
- *	time if it is known that it is no longer necessary.
- * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
- * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
- *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
- *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
- *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
- *	the frame.
- * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
- *	backward compatibility.
- *
- * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
- * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
- *
- * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
- *	is used to configure connection quality monitoring notification trigger
- *	levels.
- * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
- *	command is used as an event to indicate the that a trigger level was
- *	reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
- *	In case multiple channels are supported by the device, the mechanism
- *	with which it switches channels is implementation-defined.
- *	When a monitor interface is given, it can only switch channel while
- *	no other interfaces are operating to avoid disturbing the operation
- *	of any other interfaces, and other interfaces will again take
- *	precedence when they are used.
- *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
- *
- * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
- *	multicast to unicast conversion. When enabled, all multicast packets
- *	with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
- *	will be sent out to each station once with the destination (multicast)
- *	MAC address replaced by the station's MAC address. Note that this may
- *	break certain expectations of the receiver, e.g. the ability to drop
- *	unicast IP packets encapsulated in multicast L2 frames, or the ability
- *	to not send destination unreachable messages in such cases.
- *	This can only be toggled per BSS. Configure this on an interface of
- *	type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
- *	(%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
- *	If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
- *	command, the feature is disabled.
- *
- * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
- *	mesh config parameters may be given.
- * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
- *	network is determined by the network interface.
- *
- * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
- *	notification. This event is used to indicate that an unprotected
- *	deauthentication frame was dropped when MFP is in use.
- * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
- *	notification. This event is used to indicate that an unprotected
- *	disassociation frame was dropped when MFP is in use.
- *
- * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
- *      beacon or probe response from a compatible mesh peer.  This is only
- *      sent while no station information (sta_info) exists for the new peer
- *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
- *      @NL80211_MESH_SETUP_USERSPACE_AMPE, or
- *      @NL80211_MESH_SETUP_USERSPACE_MPM is set.  On reception of this
- *      notification, userspace may decide to create a new station
- *      (@NL80211_CMD_NEW_STATION).  To stop this notification from
- *      reoccurring, the userspace authentication daemon may want to create the
- *      new station with the AUTHENTICATED flag unset and maybe change it later
- *      depending on the authentication result.
- *
- * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
- * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
- *	Since wireless is more complex than wired ethernet, it supports
- *	various triggers. These triggers can be configured through this
- *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- *	more background information, see
- *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
- *	The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
- *	from the driver reporting the wakeup reason. In this case, the
- *	@NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
- *	for the wakeup, if it was caused by wireless. If it is not present
- *	in the wakeup notification, the wireless device didn't cause the
- *	wakeup but reports that it was woken up.
- *
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- *	the necessary information for supporting GTK rekey offload. This
- *	feature is typically used during WoWLAN. The configuration data
- *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
- *	contains the data in sub-attributes). After rekeying happened,
- *	this command may also be sent by the driver as an MLME event to
- *	inform userspace of the new replay counter.
- *
- * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
- *
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
- *	In addition, this can be used as an event to request userspace to take
- *	actions on TDLS links (set up a new link or tear down an existing one).
- *	In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
- *	operation, %NL80211_ATTR_MAC contains the peer MAC address, and
- *	%NL80211_ATTR_REASON_CODE the reason code to be used (only with
- *	%NL80211_TDLS_TEARDOWN).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The
- *	%NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
- *	sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as
- *	802.11 management frames, while TDLS action codes (802.11-2012
- *	8.5.13.1) will be encapsulated and sent as data frames. The currently
- *	supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES
- *	and the currently supported TDLS actions codes are given in
- *	&enum ieee80211_tdls_actioncode.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
- *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
- *	implement sending deauth to stations that send unexpected class 3
- *	frames. Also used as the event sent by the kernel when such a frame
- *	is received.
- *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
- *	other attributes like the interface index are present.
- *	If used as the command it must have an interface index and you can
- *	only unsubscribe from the event by closing the socket. Subscription
- *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
- *
- * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
- *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
- *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
- *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
- *
- * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
- *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
- *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
- *	up the event with the request. The event includes the same data and
- *	has %NL80211_ATTR_ACK set if the frame was ACKed.
- *
- * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
- *	other BSSes when any interfaces are in AP mode. This helps implement
- *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
- *	messages. Note that per PHY only one application may register.
- *
- * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
- *      No Acknowledgement Policy should be applied.
- *
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- *	independently of the userspace SME, send this event indicating
- *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
- *	attributes determining channel width.  This indication may also be
- *	sent when a remotely-initiated switch (e.g., when a STA receives a CSA
- *	from the remote AP) is completed;
- *
- * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
- *	has been started on an interface, regardless of the initiator
- *	(ie. whether it was requested from a remote device or
- *	initiated on our own).  It indicates that
- *	%NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
- *	after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may
- *	decide to react to this indication by requesting other
- *	interfaces to change channel as well.
- *
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
- *	its %NL80211_ATTR_WDEV identifier. It must have been created with
- *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
- *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
- *	public action frame TX.
- * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
- *	its %NL80211_ATTR_WDEV identifier.
- *
- * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
- *	notify userspace that AP has rejected the connection request from a
- *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
- *	is used for this.
- *
- * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
- *	for IBSS or MESH vif.
- *
- * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
- *	This is to be used with the drivers advertising the support of MAC
- *	address based access control. List of MAC addresses is passed in
- *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
- *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
- *	is not already done. The new list will replace any existing list. Driver
- *	will clear its ACL when the list of MAC addresses passed is empty. This
- *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
- *	ACL list during %NL80211_CMD_STOP_AP.
- *
- * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
- *	a radar is detected or the channel availability scan (CAC) has finished
- *	or was aborted, or a radar was detected, usermode will be notified with
- *	this event. This command is also used to notify userspace about radars
- *	while operating on this channel.
- *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
- *	event.
- *
- * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
- *	i.e. features for the nl80211 protocol rather than device features.
- *	Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
- *
- * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
- *	Information Element to the WLAN driver
- *
- * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
- *	to the supplicant. This will carry the target AP's MAC address along
- *	with the relevant Information Elements. This event is used to report
- *	received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
- *
- * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running
- *	a critical protocol that needs more reliability in the connection to
- *	complete.
- *
- * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
- *	return back to normal.
- *
- * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
- * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
- *
- * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
- *	the new channel information (Channel Switch Announcement - CSA)
- *	in the beacon for some time (as defined in the
- *	%NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
- *	new channel. Userspace provides the new channel information (using
- *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
- *	width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
- *	other station that transmission must be blocked until the channel
- *	switch is complete.
- *
- * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
- *	by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
- *	%NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
- *	%NL80211_ATTR_VENDOR_DATA.
- *	For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
- *	used in the wiphy data as a nested attribute containing descriptions
- *	(&struct nl80211_vendor_cmd_info) of the supported vendor commands.
- *	This may also be sent as an event with the same attributes.
- *
- * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.
- *	The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If
- *	that attribute is not included, QoS mapping is disabled. Since this
- *	QoS mapping is relevant for IP packets, it is only valid during an
- *	association. This is cleared on disassociation and AP restart.
- *
- * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
- *	%NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
- *	and %NL80211_ATTR_ADMITTED_TIME parameters.
- *	Note that the action frame handshake with the AP shall be handled by
- *	userspace via the normal management RX/TX framework, this only sets
- *	up the TX TS in the driver/device.
- *	If the admitted time attribute is not added then the request just checks
- *	if a subsequent setup could be successful, the intent is to use this to
- *	avoid setting up a session with the AP when local restrictions would
- *	make that impossible. However, the subsequent "real" setup may still
- *	fail even if the check was successful.
- * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
- *	and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
- *	before removing a station entry entirely, or before disassociating
- *	or similar, cleanup will happen in the driver/device in this case.
- *
- * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
- *	destination %NL80211_ATTR_MAC on the interface identified by
- *	%NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
- *	bandwidth of a channel must be given.
- * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
- *	network is determined by the network interface.
- *
- * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
- *	identified by the %NL80211_ATTR_MAC parameter. A target channel is
- *	provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
- *	channel width/type. The target operating class is given via
- *	%NL80211_ATTR_OPER_CLASS.
- *	The driver is responsible for continually initiating channel-switching
- *	operations and returning to the base channel for communication with the
- *	AP.
- * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
- *	peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
- *	when this command completes.
- *
- * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
- *	as an event to indicate changes for devices with wiphy-specific regdom
- *	management.
- *
- * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
- *	not running. The driver indicates the status of the scan through
- *	cfg80211_scan_done().
- *
- * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
- *	%NL80211_ATTR_WDEV interface. This interface must have been
- *	previously created with %NL80211_CMD_NEW_INTERFACE. After it
- *	has been started, the NAN interface will create or join a
- *	cluster. This command must have a valid
- *	%NL80211_ATTR_NAN_MASTER_PREF attribute and optional
- *	%NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
- *	omitted or set to 0, it means don't-care and the device will
- *	decide what to use.  After this command NAN functions can be
- *	added.
- * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
- *	its %NL80211_ATTR_WDEV interface.
- * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
- *	with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
- *	operation returns the strictly positive and unique instance id
- *	(%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
- *	of the function upon success.
- *	Since instance ID's can be re-used, this cookie is the right
- *	way to identify the function. This will avoid races when a termination
- *	event is handled by the user space after it has already added a new
- *	function that got the same instance id from the kernel as the one
- *	which just terminated.
- *	This cookie may be used in NAN events even before the command
- *	returns, so userspace shouldn't process NAN events until it processes
- *	the response to this command.
- *	Look at %NL80211_ATTR_SOCKET_OWNER as well.
- * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
- *	This command is also used as a notification sent when a NAN function is
- *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
- *	and %NL80211_ATTR_COOKIE attributes.
- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
- *	configuration. NAN must be operational (%NL80211_CMD_START_NAN
- *	was executed).  It must contain at least one of the following
- *	attributes: %NL80211_ATTR_NAN_MASTER_PREF,
- *	%NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
- *	current configuration is not changed.  If it is present but
- *	set to zero, the configuration is changed to don't-care
- *	(i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
- *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
- *	%NL80211_ATTR_COOKIE.
- *
- * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
- *	for subsequent roaming cases if the driver or firmware uses internal
- *	BSS selection. This command can be issued only while connected and it
- *	does not result in a change for the current association. Currently,
- *	only the %NL80211_ATTR_IE data is used and updated with this command.
- *
- * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
- *	for the given authenticator address (specified with %NL80211_ATTR_MAC).
- *	When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
- *	PMK-R0, otherwise it specifies the PMK.
- * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
- *	configured PMK for the authenticator address identified by
- *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
- *	handshake was completed successfully by the driver. The BSSID is
- *	specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
- *	offload should send this event after indicating 802.11 association with
- *	%NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
- *	%NL80211_CMD_DISCONNECT should be indicated instead.
- *
- * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
- *	and RX notification.  This command is used both as a request to transmit
- *	a control port frame and as a notification that a control port frame
- *	has been received. %NL80211_ATTR_FRAME is used to specify the
- *	frame contents.  The frame is the raw EAPoL data, without ethernet or
- *	802.11 headers.
- *	When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
- *	indicating the protocol type of the received frame; whether the frame
- *	was received unencrypted and the MAC address of the peer respectively.
- *
- * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
- *
- * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
- *	drivers that do not define separate commands for authentication and
- *	association, but rely on user space for the authentication to happen.
- *	This interface acts both as the event request (driver to user space)
- *	to trigger the authentication and command response (userspace to
- *	driver) to indicate the authentication status.
- *
- *	User space uses the %NL80211_CMD_CONNECT command to the host driver to
- *	trigger a connection. The host driver selects a BSS and further uses
- *	this interface to offload only the authentication part to the user
- *	space. Authentication frames are passed between the driver and user
- *	space through the %NL80211_CMD_FRAME interface. Host driver proceeds
- *	further with the association after getting successful authentication
- *	status. User space indicates the authentication status through
- *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
- *	command interface.
- *
- *	Host driver reports this status on an authentication failure to the
- *	user space through the connect result as the user space would have
- *	initiated the connection through the connect request.
- *
- * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
- *	ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
- *	%NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
- *	address(specified in %NL80211_ATTR_MAC).
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-enum nl80211_commands {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_CMD_UNSPEC,
-
-	NL80211_CMD_GET_WIPHY,		/* can dump */
-	NL80211_CMD_SET_WIPHY,
-	NL80211_CMD_NEW_WIPHY,
-	NL80211_CMD_DEL_WIPHY,
-
-	NL80211_CMD_GET_INTERFACE,	/* can dump */
-	NL80211_CMD_SET_INTERFACE,
-	NL80211_CMD_NEW_INTERFACE,
-	NL80211_CMD_DEL_INTERFACE,
-
-	NL80211_CMD_GET_KEY,
-	NL80211_CMD_SET_KEY,
-	NL80211_CMD_NEW_KEY,
-	NL80211_CMD_DEL_KEY,
-
-	NL80211_CMD_GET_BEACON,
-	NL80211_CMD_SET_BEACON,
-	NL80211_CMD_START_AP,
-	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
-	NL80211_CMD_STOP_AP,
-	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
-
-	NL80211_CMD_GET_STATION,
-	NL80211_CMD_SET_STATION,
-	NL80211_CMD_NEW_STATION,
-	NL80211_CMD_DEL_STATION,
-
-	NL80211_CMD_GET_MPATH,
-	NL80211_CMD_SET_MPATH,
-	NL80211_CMD_NEW_MPATH,
-	NL80211_CMD_DEL_MPATH,
-
-	NL80211_CMD_SET_BSS,
-
-	NL80211_CMD_SET_REG,
-	NL80211_CMD_REQ_SET_REG,
-
-	NL80211_CMD_GET_MESH_CONFIG,
-	NL80211_CMD_SET_MESH_CONFIG,
-
-	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
-
-	NL80211_CMD_GET_REG,
-
-	NL80211_CMD_GET_SCAN,
-	NL80211_CMD_TRIGGER_SCAN,
-	NL80211_CMD_NEW_SCAN_RESULTS,
-	NL80211_CMD_SCAN_ABORTED,
-
-	NL80211_CMD_REG_CHANGE,
-
-	NL80211_CMD_AUTHENTICATE,
-	NL80211_CMD_ASSOCIATE,
-	NL80211_CMD_DEAUTHENTICATE,
-	NL80211_CMD_DISASSOCIATE,
-
-	NL80211_CMD_MICHAEL_MIC_FAILURE,
-
-	NL80211_CMD_REG_BEACON_HINT,
-
-	NL80211_CMD_JOIN_IBSS,
-	NL80211_CMD_LEAVE_IBSS,
-
-	NL80211_CMD_TESTMODE,
-
-	NL80211_CMD_CONNECT,
-	NL80211_CMD_ROAM,
-	NL80211_CMD_DISCONNECT,
-
-	NL80211_CMD_SET_WIPHY_NETNS,
-
-	NL80211_CMD_GET_SURVEY,
-	NL80211_CMD_NEW_SURVEY_RESULTS,
-
-	NL80211_CMD_SET_PMKSA,
-	NL80211_CMD_DEL_PMKSA,
-	NL80211_CMD_FLUSH_PMKSA,
-
-	NL80211_CMD_REMAIN_ON_CHANNEL,
-	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
-
-	NL80211_CMD_SET_TX_BITRATE_MASK,
-
-	NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_FRAME,
-	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
-	NL80211_CMD_FRAME_TX_STATUS,
-	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
-
-	NL80211_CMD_SET_POWER_SAVE,
-	NL80211_CMD_GET_POWER_SAVE,
-
-	NL80211_CMD_SET_CQM,
-	NL80211_CMD_NOTIFY_CQM,
-
-	NL80211_CMD_SET_CHANNEL,
-	NL80211_CMD_SET_WDS_PEER,
-
-	NL80211_CMD_FRAME_WAIT_CANCEL,
-
-	NL80211_CMD_JOIN_MESH,
-	NL80211_CMD_LEAVE_MESH,
-
-	NL80211_CMD_UNPROT_DEAUTHENTICATE,
-	NL80211_CMD_UNPROT_DISASSOCIATE,
-
-	NL80211_CMD_NEW_PEER_CANDIDATE,
-
-	NL80211_CMD_GET_WOWLAN,
-	NL80211_CMD_SET_WOWLAN,
-
-	NL80211_CMD_START_SCHED_SCAN,
-	NL80211_CMD_STOP_SCHED_SCAN,
-	NL80211_CMD_SCHED_SCAN_RESULTS,
-	NL80211_CMD_SCHED_SCAN_STOPPED,
-
-	NL80211_CMD_SET_REKEY_OFFLOAD,
-
-	NL80211_CMD_PMKSA_CANDIDATE,
-
-	NL80211_CMD_TDLS_OPER,
-	NL80211_CMD_TDLS_MGMT,
-
-	NL80211_CMD_UNEXPECTED_FRAME,
-
-	NL80211_CMD_PROBE_CLIENT,
-
-	NL80211_CMD_REGISTER_BEACONS,
-
-	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
-
-	NL80211_CMD_SET_NOACK_MAP,
-
-	NL80211_CMD_CH_SWITCH_NOTIFY,
-
-	NL80211_CMD_START_P2P_DEVICE,
-	NL80211_CMD_STOP_P2P_DEVICE,
-
-	NL80211_CMD_CONN_FAILED,
-
-	NL80211_CMD_SET_MCAST_RATE,
-
-	NL80211_CMD_SET_MAC_ACL,
-
-	NL80211_CMD_RADAR_DETECT,
-
-	NL80211_CMD_GET_PROTOCOL_FEATURES,
-
-	NL80211_CMD_UPDATE_FT_IES,
-	NL80211_CMD_FT_EVENT,
-
-	NL80211_CMD_CRIT_PROTOCOL_START,
-	NL80211_CMD_CRIT_PROTOCOL_STOP,
-
-	NL80211_CMD_GET_COALESCE,
-	NL80211_CMD_SET_COALESCE,
-
-	NL80211_CMD_CHANNEL_SWITCH,
-
-	NL80211_CMD_VENDOR,
-
-	NL80211_CMD_SET_QOS_MAP,
-
-	NL80211_CMD_ADD_TX_TS,
-	NL80211_CMD_DEL_TX_TS,
-
-	NL80211_CMD_GET_MPP,
-
-	NL80211_CMD_JOIN_OCB,
-	NL80211_CMD_LEAVE_OCB,
-
-	NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
-
-	NL80211_CMD_TDLS_CHANNEL_SWITCH,
-	NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
-
-	NL80211_CMD_WIPHY_REG_CHANGE,
-
-	NL80211_CMD_ABORT_SCAN,
-
-	NL80211_CMD_START_NAN,
-	NL80211_CMD_STOP_NAN,
-	NL80211_CMD_ADD_NAN_FUNCTION,
-	NL80211_CMD_DEL_NAN_FUNCTION,
-	NL80211_CMD_CHANGE_NAN_CONFIG,
-	NL80211_CMD_NAN_MATCH,
-
-	NL80211_CMD_SET_MULTICAST_TO_UNICAST,
-
-	NL80211_CMD_UPDATE_CONNECT_PARAMS,
-
-	NL80211_CMD_SET_PMK,
-	NL80211_CMD_DEL_PMK,
-
-	NL80211_CMD_PORT_AUTHORIZED,
-
-	NL80211_CMD_RELOAD_REGDB,
-
-	NL80211_CMD_EXTERNAL_AUTH,
-
-	NL80211_CMD_STA_OPMODE_CHANGED,
-
-	NL80211_CMD_CONTROL_PORT_FRAME,
-
-	/* add new commands above here */
-
-	/* used to define NL80211_CMD_MAX below */
-	__NL80211_CMD_AFTER_LAST,
-	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
-};
-
-/*
- * Allow user space programs to use #ifdef on new commands by defining them
- * here
- */
-#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
-#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
-#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
-#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
-#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
-#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
-#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
-
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-/* source-level API compatibility */
-#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
-#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
-#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
-
- /**
- * DOC: SAE authentication offload
- *
- * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
- * support offloading SAE authentication for WPA3-Personal networks. In
- * %NL80211_CMD_CONNECT the password for SAE should be specified using
- * %NL80211_ATTR_SAE_PASSWORD.
- */
-
-/**
- * enum nl80211_attrs - nl80211 netlink attributes
- *
- * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
- *
- * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
- *	/sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
- *	defines the channel together with the (deprecated)
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
- *	%NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
- *	and %NL80211_ATTR_CENTER_FREQ2
- * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
- *	of &enum nl80211_chan_width, describing the channel width. See the
- *	documentation of the enum for more information.
- * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- *	channel, used for anything but 20 MHz bandwidth
- * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
- *	channel, used only for 80+80 MHz bandwidth
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- *	if HT20 or HT40 are to be used (i.e., HT disabled if not included):
- *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- *		this attribute)
- *	NL80211_CHAN_HT20 = HT20 only
- *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
- *	This attribute is now deprecated.
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- *	less than or equal to the RTS threshold; allowed range: 1..255;
- *	dot11ShortRetryLimit; u8
- * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
- *	greater than the RTS threshold; allowed range: 1..255;
- *	dot11ShortLongLimit; u8
- * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
- *	length in octets for frames; allowed range: 256..8000, disable
- *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
- * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
- *	larger than or equal to this use RTS/CTS handshake); allowed range:
- *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
- * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
- *	section 7.3.2.9; dot11CoverageClass; u8
- *
- * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
- * @NL80211_ATTR_IFNAME: network interface name
- * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
- *
- * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
- *	that don't have a netdev (u64)
- *
- * @NL80211_ATTR_MAC: MAC address (various uses)
- *
- * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
- * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
- *	default management key
- * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
- *	other commands, indicates which pairwise cipher suites are used
- * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
- *	other commands, indicates which group cipher suite is used
- *
- * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
- * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
- * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
- * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
- *
- * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
- * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
- * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
- *	IEEE 802.11 7.3.1.6 (u16).
- * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
- *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- *	to, or the AP interface the station was originally added to to.
- * @NL80211_ATTR_STA_INFO: information about a station, part of station info
- *	given for %NL80211_CMD_GET_STATION, nested attribute containing
- *	info as possible, see &enum nl80211_sta_info.
- *
- * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
- *	consisting of a nested array.
- *
- * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
- *	(see &enum nl80211_plink_action).
- * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
- * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
- *	&enum nl80211_mpath_info.
- *
- * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
- *      &enum nl80211_mntr_flags.
- *
- * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11 country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
- * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
- *	rules.
- *
- * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
- *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
- *	supported interface types, each a flag attribute with the number
- *	of the interface mode.
- *
- * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
- *
- * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
- *
- * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
- *	a single scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
- *	scan with a single scheduled scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
- *	that can be added to a scan request
- * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
- *	elements that can be added to a scheduled scan request
- * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
- *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
- *
- * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
- * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
- *	scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_BSS: scan result BSS
- *
- * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
- * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
- *
- * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
- *	an array of command numbers (i.e. a mapping index to command number)
- *	that the driver for the given wiphy supports.
- *
- * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
- *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
- *	NL80211_CMD_ASSOCIATE events
- * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
- * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
- *	represented as a u32
- * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
- *	%NL80211_CMD_DISASSOCIATE, u16
- *
- * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
- *	a u32
- *
- * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- *
- * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
- *	cipher suites
- *
- * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
- *	for other networks on different channels
- *
- * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
- *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
- *
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used with %NL80211_CMD_ASSOCIATE and
- *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
- *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
- *	must have decided whether to use management frame protection or not.
- *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
- *	let the driver (or the firmware) decide whether to use MFP or not.
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- *	&struct nl80211_sta_flag_update.
- *
- * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
- *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
- *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
- *	request, the driver will assume that the port is unauthorized until
- *	authorized by user space. Otherwise, port is marked authorized by
- *	default in station mode.
- * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
- *	ethertype that will be used for key negotiation. It can be
- *	specified with the associate and connect commands. If it is not
- *	specified, the value defaults to 0x888E (PAE, 802.1X). This
- *	attribute is also used as a flag in the wiphy information to
- *	indicate that protocols other than PAE are supported.
- * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
- *	ethertype frames used for key negotiation must not be encrypted.
- * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
- *	port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
- *	will be sent directly to the network interface or sent via the NL80211
- *	socket.  If this attribute is missing, then legacy behavior of sending
- *	control port frames directly to the network interface is used.  If the
- *	flag is included, then control port frames are sent over NL80211 instead
- *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
- *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
- *	flag.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- *	We recommend using nested, driver-specific attributes within this.
- *
- * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
- *	event was due to the AP disconnecting the station, and not due to
- *	a local disconnect request.
- * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
- *	event (u16)
- * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- *	that protected APs should be used. This is also used with NEW_BEACON to
- *	indicate that the BSS is to use protection.
- *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which WPA version(s) the AP we want to associate with is using
- *	(a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which key management algorithm(s) to use (an array of u32).
- *
- * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
- *	sent out by the card, for ROAM and successful CONNECT events.
- * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
- *	sent by peer, for ROAM and successful CONNECT events.
- *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
- *	commands to specify a request to reassociate within an ESS, i.e., to use
- *	Reassociate Request frame (with the value of this attribute in the
- *	Current AP address field) instead of Association Request frame which is
- *	used for the initial association to an ESS.
- *
- * @NL80211_ATTR_KEY: key information in a nested attribute with
- *	%NL80211_KEY_* sub-attributes
- * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
- *	and join_ibss(), key information is in a nested attribute each
- *	with %NL80211_KEY_* sub-attributes
- *
- * @NL80211_ATTR_PID: Process ID of a network namespace.
- *
- * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
- *	dumps. This number increases whenever the object list being
- *	dumped changes, and as such userspace can verify that it has
- *	obtained a complete and consistent snapshot by verifying that
- *	all dump messages contain the same generation number. If it
- *	changed then the list changed and the dump should be repeated
- *	completely from scratch.
- *
- * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
- *
- * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
- *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
- *      containing info as possible, see &enum survey_info.
- *
- * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
- * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
- *	cache, a wiphy attribute.
- *
- * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
- * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
- *	specifies the maximum duration that can be requested with the
- *	remain-on-channel operation, in milliseconds, u32.
- *
- * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
- *
- * @NL80211_ATTR_TX_RATES: Nested set of attributes
- *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
- *	enum nl80211_band value is used as the index (nla_type() of the nested
- *	data. If a band is not included, it will be configured to allow all
- *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
- *	and joining mesh networks (not IBSS yet). In the later case, it must
- *	specify just a single bitrate, which is to be used for the beacon.
- *	The driver must also specify support for this with the extended
- *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
- *
- * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
- * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
- *	@NL80211_CMD_REGISTER_FRAME command.
- * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be transmitted with
- *	%NL80211_CMD_FRAME.
- * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be registered for RX.
- *
- * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
- *	acknowledged by the recipient.
- *
- * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
- *
- * @NL80211_ATTR_CQM: connection quality monitor configuration in a
- *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
- *
- * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
- *	is requesting a local authentication/association state change without
- *	invoking actual management frame exchange. This can be used with
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
- *	NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
- *	connected to this BSS.
- *
- * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
- *      &enum nl80211_tx_power_setting for possible values.
- * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
- *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- *      for non-automatic settings.
- *
- * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
- *	means support for per-station GTKs.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for transmitting. If an antenna is not selected in this
- *	bitmap the hardware is not allowed to transmit on this antenna.
- *
- *	Each bit represents one antenna, starting with antenna 1 at the first
- *	bit. Depending on which antennas are selected in the bitmap, 802.11n
- *	drivers can derive which chainmasks to use (if all antennas belonging to
- *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
- *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
- *	Drivers may reject configurations or RX/TX mask combinations they cannot
- *	support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for receiving. If an antenna is not selected in this bitmap
- *	the hardware should not be configured to receive on this antenna.
- *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
- *	for configuration as TX antennas via the above parameters.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
- *	for configuration as RX antennas via the above parameters.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
- * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
- *	transmitted on another channel when the channel given doesn't match
- *	the current channel. If the current channel doesn't match and this
- *	flag isn't set, the frame will be rejected. This is also used as an
- *	nl80211 capability flag.
- *
- * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
- *
- * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- *
- * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- *	changed once the mesh is active.
- * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
- *	containing attributes from &enum nl80211_meshconf_params.
- * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
- *	allows auth frames in a mesh to be passed to userspace for processing via
- *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
- *	&enum nl80211_plink_state. Used when userspace is driving the peer link
- *	management state machine.  @NL80211_MESH_SETUP_USERSPACE_AMPE or
- *	@NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
- *
- * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
- *	capabilities, the supported WoWLAN triggers
- * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
- *	indicate which WoW triggers should be enabled. This is also
- *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
- *	triggers.
- *
- * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
- *	cycles, in msecs.
- *
- * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
- *	sets of attributes to match during scheduled scans.  Only BSSs
- *	that match any of the sets will be reported.  These are
- *	pass-thru filter rules.
- *	For a match to succeed, the BSS must match all attributes of a
- *	set.  Since not every hardware supports matching all types of
- *	attributes, there is no guarantee that the reported BSSs are
- *	fully complying with the match sets and userspace needs to be
- *	able to ignore them by itself.
- *	Thus, the implementation is somewhat hardware-dependent, but
- *	this is only an optimization and the userspace application
- *	needs to handle all the non-filtered results anyway.
- *	If the match attributes don't make sense when combined with
- *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
- *	is included in the probe request, but the match attributes
- *	will never let it go through), -EINVAL may be returned.
- *	If ommited, no filtering is done.
- *
- * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
- *	interface combinations. In each nested item, it contains attributes
- *	defined in &enum nl80211_if_combination_attrs.
- * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
- *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
- *	are managed in software: interfaces of these types aren't subject to
- *	any restrictions in their number or combinations.
- *
- * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
- *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
- *
- * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
- *	nested array attribute containing an entry for each band, with the entry
- *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
- *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
- *	and Probe Response (when response to wildcard Probe Request); see
- *	&enum nl80211_hidden_ssid, represented as a u32
- *
- * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
- *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
- *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
- *	driver (or firmware) replies to Probe Request frames.
- * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
- *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
- *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
- *	(Re)Association Response frames when the driver (or firmware) replies to
- *	(Re)Association Request frames.
- *
- * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
- *	of the station, see &enum nl80211_sta_wme_attr.
- * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
- *	as AP.
- *
- * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
- *	roaming to another AP in the same ESS if the signal lever is low.
- *
- * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
- *	candidate information, see &enum nl80211_pmksa_candidate_attr.
- *
- * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
- *	for management frames transmission. In order to avoid p2p probe/action
- *	frames are being transmitted at CCK rate in 2GHz band, the user space
- *	applications use this attribute.
- *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
- *	%NL80211_CMD_FRAME commands.
- *
- * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
- *	request, link setup confirm, link teardown, etc.). Values are
- *	described in the TDLS (802.11z) specification.
- * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
- *	TDLS conversation between two devices.
- * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
- *	&enum nl80211_tdls_operation, represented as a u8.
- * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
- *	as a TDLS peer sta.
- * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
- *	procedures should be performed by sending TDLS packets via
- *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
- *	used for asking the driver to perform a TDLS operation.
- *
- * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
- *	that have AP support to indicate that they have the AP SME integrated
- *	with support for the features listed in this attribute, see
- *	&enum nl80211_ap_sme_features.
- *
- * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
- *	the driver to not wait for an acknowledgement. Note that due to this,
- *	it will also not give a status callback nor return a cookie. This is
- *	mostly useful for probe responses to save airtime.
- *
- * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
- *	&enum nl80211_feature_flags and is advertised in wiphy information.
- * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *	requests while operating in AP-mode.
- *	This attribute holds a bitmap of the supported protocols for
- *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
- *
- * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
- *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
- *	to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
- *      this feature.  Currently, only supported in mac80211 drivers.
- * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
- *      ATTR_HT_CAPABILITY to which attention should be paid.
- *      Currently, only mac80211 NICs support this feature.
- *      The values that may be configured are:
- *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
- *       AMPDU density and AMPDU factor.
- *      All values are treated as suggestions and may be ignored
- *      by the driver as required.  The actual values may be seen in
- *      the station debugfs ht_caps file.
- *
- * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
- *    abides to when initiating radiation on DFS channels. A country maps
- *    to one DFS region.
- *
- * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
- *      up to 16 TIDs.
- *
- * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
- *	used by the drivers which has MLME in firmware and does not have support
- *	to report per station tx/rx activity to free up the staion entry from
- *	the list. This needs to be used when the driver advertises the
- *	capability to timeout the stations.
- *
- * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
- *	this attribute is (depending on the driver capabilities) added to
- *	received frames indicated with %NL80211_CMD_FRAME.
- *
- * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
- *      or 0 to disable background scan.
- *
- * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
- *	userspace. If unset it is assumed the hint comes directly from
- *	a user. If set code could specify exactly what type of source
- *	was used to provide the hint. For the different types of
- *	allowed user regulatory hints see nl80211_user_reg_hint_type.
- *
- * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
- *	the connection request from a station. nl80211_connect_failed_reason
- *	enum has different reasons of connection failure.
- *
- * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
- *	This contains the authentication frame body (non-IE and IE data),
- *	excluding the Authentication algorithm number, i.e., starting at the
- *	Authentication transaction sequence number field. It is used with
- *	authentication algorithms that need special fields to be added into
- *	the frames (SAE and FILS). Currently, only the SAE cases use the
- *	initial two fields (Authentication transaction sequence number and
- *	Status code). However, those fields are included in the attribute data
- *	for all authentication algorithms to keep the attribute definition
- *	consistent.
- *
- * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
- *
- * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
- *	the START_AP and SET_BSS commands
- * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
- *	START_AP and SET_BSS commands. This can have the values 0 or 1;
- *	if not given in START_AP 0 is assumed, if not given in SET_BSS
- *	no change is made.
- *
- * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
- *	defined in &enum nl80211_mesh_power_mode.
- *
- * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
- *	carried in a u32 attribute
- *
- * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
- *	MAC ACL.
- *
- * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
- *	number of MAC addresses that a device can support for MAC
- *	ACL.
- *
- * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
- *	contains a value of enum nl80211_radar_event (u32).
- *
- * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
- *	has and handles. The format is the same as the IE contents. See
- *	802.11-2012 8.4.2.29 for more information.
- * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
- *	has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
- *
- * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
- *	the driver, e.g., to enable TDLS power save (PU-APSD).
- *
- * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
- *	advertised to the driver, e.g., to enable TDLS off channel operations
- *	and PU-APSD.
- *
- * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
- *	&enum nl80211_protocol_features, the attribute is a u32.
- *
- * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
- *	receiving the data for a single wiphy split across multiple
- *	messages, given with wiphy dump message
- *
- * @NL80211_ATTR_MDID: Mobility Domain Identifier
- *
- * @NL80211_ATTR_IE_RIC: Resource Information Container Information
- *	Element
- *
- * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased
- *	reliability, see &enum nl80211_crit_proto_id (u16).
- * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
- *      the connection should have increased reliability (u16).
- *
- * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
- *	This is similar to @NL80211_ATTR_STA_AID but with a difference of being
- *	allowed to be used with the first @NL80211_CMD_SET_STATION command to
- *	update a TDLS peer STA entry.
- *
- * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
- *
- * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
- *	until the channel switch event.
- * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
- *	must be blocked on the current channel (before the channel switch
- *	operation).
- * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
- *	for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
- *	switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
- *	switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
- *
- * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
- *	As specified in the &enum nl80211_rxmgmt_flags.
- *
- * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
- *
- * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
- *      supported operating classes.
- *
- * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
- *	controls DFS operation in IBSS mode. If the flag is included in
- *	%NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS
- *	channels and reports radar events to userspace. Userspace is required
- *	to react to radar events, e.g. initiate a channel switch or leave the
- *	IBSS network.
- *
- * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports
- *	5 MHz channel bandwidth.
- * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports
- *	10 MHz channel bandwidth.
- *
- * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
- *	Notification Element based on association request when used with
- *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
- *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
- *	u8 attribute.
- *
- * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
- *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
- * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
- * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
- *	attribute is also used for vendor command feature advertisement
- * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy
- *	info, containing a nested array of possible events
- *
- * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This
- *	data is in the format defined for the payload of the QoS Map Set element
- *	in IEEE Std 802.11-2012, 8.4.2.97.
- *
- * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
- * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
- *
- * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
- *	associated stations are supported in AP mode (including P2P GO); u32.
- *	Since drivers may not have a fixed limit on the maximum number (e.g.,
- *	other concurrent operations may affect this), drivers are allowed to
- *	advertise values that cannot always be met. In such cases, an attempt
- *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
- *
- * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
- *	should be updated when the frame is transmitted.
- * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
- *	supported number of csa counters.
- *
- * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
- *	As specified in the &enum nl80211_tdls_peer_capability.
- *
- * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
- *	creation then the new interface will be owned by the netlink socket
- *	that created it and will be destroyed when the socket is closed.
- *	If set during scheduled scan start then the new scan req will be
- *	owned by the netlink socket that created it and the scheduled scan will
- *	be stopped when the socket is closed.
- *	If set during configuration of regulatory indoor operation then the
- *	regulatory indoor configuration would be owned by the netlink socket
- *	that configured the indoor setting, and the indoor operation would be
- *	cleared when the socket is closed.
- *	If set during NAN interface creation, the interface will be destroyed
- *	if the socket is closed just like any other interface. Moreover, NAN
- *	notifications will be sent in unicast to that socket. Without this
- *	attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
- *	multicast group.
- *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
- *	station will deauthenticate when the socket is closed.
- *	If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
- *	torn down when the socket is closed.
- *	If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
- *	automatically torn down when the socket is closed.
- *	If set during %NL80211_CMD_START_AP the AP will be automatically
- *	disabled when the socket is closed.
- *
- * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
- *	the TDLS link initiator.
- *
- * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
- *	shall support Radio Resource Measurements (11k). This attribute can be
- *	used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
- *	User space applications are expected to use this flag only if the
- *	underlying device supports these minimal RRM features:
- *		%NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
- *		%NL80211_FEATURE_QUIET,
- *	Or, if global RRM is supported, see:
- *		%NL80211_EXT_FEATURE_RRM
- *	If this flag is used, driver must add the Power Capabilities IE to the
- *	association request. In addition, it must also set the RRM capability
- *	flag in the association request's Capability Info field.
- *
- * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
- *	estimation algorithm (dynack). In order to activate dynack
- *	%NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
- *	drivers to indicate dynack capability. Dynack is automatically disabled
- *	setting valid value for coverage class.
- *
- * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
- * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
- * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
- *	(per second) (u16 attribute)
- *
- * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
- *	&enum nl80211_smps_mode.
- *
- * @NL80211_ATTR_OPER_CLASS: operating class
- *
- * @NL80211_ATTR_MAC_MASK: MAC address mask
- *
- * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
- *	is self-managing its regulatory information and any regulatory domain
- *	obtained from it is coming from the device's wiphy and not the global
- *	cfg80211 regdomain.
- *
- * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
- *	array. The feature flags are identified by their bit index (see &enum
- *	nl80211_ext_feature_index). The bit index is ordered starting at the
- *	least-significant bit of the first byte in the array, ie. bit index 0
- *	is located at bit 0 of byte 0. bit index 25 would be located at bit 1
- *	of byte 3 (u8 array).
- *
- * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
- *	returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
- *	may return a survey entry without a channel indicating global radio
- *	statistics (only some values are valid and make sense.)
- *	For devices that don't return such an entry even then, the information
- *	should be contained in the result as the sum of the respective counters
- *	over all channels.
- *
- * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
- *	scheduled scan is started.  Or the delay before a WoWLAN
- *	net-detect scan is started, counting from the moment the
- *	system is suspended.  This value is a u32, in seconds.
-
- * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
- *      is operating in an indoor environment.
- *
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
- *	scheduled scan supported by the device (u32), a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
- *	a scan plan (u32), a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
- *	a scan plan (u32), a wiphy attribute.
- * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
- *	Each scan plan defines the number of scan iterations and the interval
- *	between scans. The last scan plan will always run infinitely,
- *	thus it must not specify the number of iterations, only the interval
- *	between scans. The scan plans are executed sequentially.
- *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
- * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
- *	in a PBSS. Specified in %NL80211_CMD_CONNECT to request
- *	connecting to a PCP, and in %NL80211_CMD_START_AP to start
- *	a PCP instead of AP. Relevant for DMG networks only.
- * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
- *	BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
- *	attributes according &enum nl80211_bss_select_attr to indicate what
- *	BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
- *	it contains the behaviour-specific attribute containing the parameters for
- *	BSS selection to be done by driver and/or firmware.
- *
- * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
- *	or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
- *
- * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
- *
- * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
- *	%NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
- *	%NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
- *	interface type.
- *
- * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
- *	groupID for monitor mode.
- *	The first 8 bytes are a mask that defines the membership in each
- *	group (there are 64 groups, group 0 and 63 are reserved),
- *	each bit represents a group and set to 1 for being a member in
- *	that group and 0 for not being a member.
- *	The remaining 16 bytes define the position in each group: 2 bits for
- *	each group.
- *	(smaller group numbers represented on most significant bits and bigger
- *	group numbers on least significant bits.)
- *	This attribute is used only if all interfaces are in monitor mode.
- *	Set this attribute in order to monitor packets using the given MU-MIMO
- *	groupID data.
- *	to turn off that feature set all the bits of the groupID to zero.
- * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
- *	when using MU-MIMO air sniffer.
- *	to turn that feature off set an invalid mac address
- *	(e.g. FF:FF:FF:FF:FF:FF)
- *
- * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
- *	started (u64). The time is the TSF of the BSS the interface that
- *	requested the scan is connected to (if available, otherwise this
- *	attribute must not be included).
- * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
- *	%NL80211_ATTR_SCAN_START_TIME_TSF is set.
- * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
- *	%NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
- *	maximum measurement duration allowed. This attribute is used with
- *	measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
- *	if the scan is used for beacon report radio measurement.
- * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
- *	that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
- *	mandatory. If this flag is not set, the duration is the maximum duration
- *	and the actual measurement duration may be shorter.
- *
- * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
- *	used to pull the stored data for mesh peer in power save state.
- *
- * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
- *	%NL80211_CMD_START_NAN and optionally with
- *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
- *	Also, values 1 and 255 are reserved for certification purposes and
- *	should not be used during a normal device operation.
- * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
- *	bitmask of BIT(NL80211_BAND_*) as described in %enum
- *	nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
- *	would be set.  This attribute is used with
- *	%NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
- *	it is optional.  If no bands are set, it means don't-care and
- *	the device will decide what to use.
- * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
- *	&enum nl80211_nan_func_attributes for description of this nested
- *	attribute.
- * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
- *	See &enum nl80211_nan_match_attributes.
- * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
- *	protection.
- * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
- *	Request/Response frame protection. This attribute contains the 16 octet
- *	STA Nonce followed by 16 octets of AP Nonce.
- *
- * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
- *	packets should be send out as unicast to all stations (flag attribute).
- *
- * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
- *	used in various commands/events for specifying the BSSID.
- *
- * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
- *	other BSSs has to be better or slightly worse than the current
- *	connected BSS so that they get reported to user space.
- *	This will give an opportunity to userspace to consider connecting to
- *	other matching BSSs which have better or slightly worse RSSI than
- *	the current connected BSS by using an offloaded operation to avoid
- *	unnecessary wakeups.
- *
- * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
- *	the specified band is to be adjusted before doing
- *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
- *	better BSSs. The attribute value is a packed structure
- *	value as specified by &struct nl80211_bss_select_rssi_adjust.
- *
- * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
- *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
- *	e.g., with %NL80211_CMD_CONNECT event.
- *
- * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
- *	username part of NAI used to refer keys rRK and rIK. This is used with
- *	%NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
- *	of NAI specifying the domain name of the ER server. This is used with
- *	%NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
- *	to use in ERP messages. This is used in generating the FILS wrapped data
- *	for FILS authentication and is used with %NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
- *	NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
- *	%NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
- *	from successful FILS authentication and is used with
- *	%NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
- *	identifying the scope of PMKSAs. This is used with
- *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
- *
- * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
- *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
- *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
- *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
- *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
- *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
- *
- * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
- *	indicate that it supports multiple active scheduled scan requests.
- * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
- *	scan request that may be active for the device (u32).
- *
- * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
- *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
- *	wants to use the supported offload of the 4-way handshake.
- * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
- * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
- *
- * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
- *     authentication operation (u32 attribute with an
- *     &enum nl80211_external_auth_action value). This is used with the
- *     %NL80211_CMD_EXTERNAL_AUTH request event.
- * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
- *     space supports external authentication. This attribute shall be used
- *     only with %NL80211_CMD_CONNECT request. The driver may offload
- *     authentication processing to user space if this capability is indicated
- *     in NL80211_CMD_CONNECT requests from the user space.
- *
- * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
- *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
- *
- * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
- *      nl80211_txq_stats)
- * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
- *      The smaller of this and the memory limit is enforced.
- * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the
- *      TXQ queues for this phy. The smaller of this and the packet limit is
- *      enforced.
- * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
- *      a flow is assigned on each round of the DRR scheduler.
- * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION). Can be set
- *	only if %NL80211_STA_FLAG_WME is set.
- *
- * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
- *	in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
- *	measurement (FTM) responder functionality and containing parameters as
- *	possible, see &enum nl80211_ftm_responder_attr
- *
- * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
- *	statistics, see &enum nl80211_ftm_responder_stats.
- *
- * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
- *	if the attribute is not given no timeout is requested. Note that 0 is an
- *	invalid value.
- *
- * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
- *	data, uses nested attributes specified in
- *	&enum nl80211_peer_measurement_attrs.
- *	This is also used for capability advertisement in the wiphy information,
- *	with the appropriate sub-attributes.
- *
- * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
- *	scheduler.
- *
- * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
- *	station associated with the AP. See &enum nl80211_tx_power_setting for
- *	possible values.
- * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
- *	allows to set Tx power for a station. If this attribute is not included,
- *	the default per-interface tx power setting will be overriding. Driver
- *	should be picking up the lowest tx power, either tx power per-interface
- *	or per-station.
- *
- * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
- *	is used with %NL80211_CMD_CONNECT to provide password for offloading
- *	SAE authentication for WPA3-Personal networks.
- *
- * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
- *
- * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
- *	functionality.
- *
- * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
- *	channel(s) that are allowed to be used for EDMG transmissions.
- *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
- * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
- *	the allowed channel bandwidth configurations. (u8 attribute)
- *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
- *
- * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
- *	(u16).
- *
- * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
- *
- * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
- *	using attributes from &enum nl80211_iftype_akm_attributes. This
- *	attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
- *	supported AKM suites capability per interface. AKMs advertised in
- *	%NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
- *	advertised for a specific interface type.
- *
- * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
- *	nested attribute with &enum nl80211_tid_config_attr sub-attributes;
- *	on output (in wiphy attributes) it contains only the feature sub-
- *	attributes.
- *
- * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
- *	port in order to forward/receive them as ordinary data frames.
- *
- * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
- *	dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
- *	An optional parameter configured through %NL80211_CMD_SET_PMKSA.
- *	Drivers that trigger roaming need to know the lifetime of the
- *	configured PMKSA for triggering the full vs. PMKSA caching based
- *	authentication. This timeout helps authentication methods like SAE,
- *	where PMK gets updated only by going through a full (new SAE)
- *	authentication instead of getting updated during an association for EAP
- *	authentication. No new full authentication within the PMK expiry shall
- *	result in a disassociation at the end of the lifetime.
- *
- * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
- *	terms of percentage of %NL80211_ATTR_PMK_LIFETIME
- *	(u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
- *	parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
- *	driver to trigger a full authentication roam (without PMKSA caching)
- *	after the reauthentication threshold time, but before the PMK lifetime
- *	has expired.
- *
- *	Authentication methods like SAE need to be able to generate a new PMKSA
- *	entry without having to force a disconnection after the PMK timeout. If
- *	no roaming occurs between the reauth threshold and PMK expiration,
- *	disassociation is still forced.
- * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
- *	%NL80211_CMD_REGISTER_FRAME command, see the description there.
- * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
- *	%NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
- *	an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
- * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
- *	first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
- * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
- *
- * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
- *	association request when used with NL80211_CMD_NEW_STATION).
- *
- * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
- *	discovery. It is a nested attribute, see
- *	&enum nl80211_fils_discovery_attributes.
- *
- * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
- *	unsolicited broadcast probe response. It is a nested attribute, see
- *	&enum nl80211_unsol_bcast_probe_resp_attributes.
- *
- * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
- *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
- *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
- *
- * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
- *	derivation in WPA3-Personal networks which are using SAE authentication.
- *	This is a u8 attribute that encapsulates one of the values from
- *	&enum nl80211_sae_pwe_mechanism.
- *
- * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
- *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
- *	of %nl80211_sar_attrs which specifies the sar type and related
- *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
- *
- * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
- *	disassoc events to indicate that an immediate reconnect to the AP
- *	is desired.
- *
- * @NUM_NL80211_ATTR: total number of nl80211_attrs available
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_attrs {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_ATTR_UNSPEC,
-
-	NL80211_ATTR_WIPHY,
-	NL80211_ATTR_WIPHY_NAME,
-
-	NL80211_ATTR_IFINDEX,
-	NL80211_ATTR_IFNAME,
-	NL80211_ATTR_IFTYPE,
-
-	NL80211_ATTR_MAC,
-
-	NL80211_ATTR_KEY_DATA,
-	NL80211_ATTR_KEY_IDX,
-	NL80211_ATTR_KEY_CIPHER,
-	NL80211_ATTR_KEY_SEQ,
-	NL80211_ATTR_KEY_DEFAULT,
-
-	NL80211_ATTR_BEACON_INTERVAL,
-	NL80211_ATTR_DTIM_PERIOD,
-	NL80211_ATTR_BEACON_HEAD,
-	NL80211_ATTR_BEACON_TAIL,
-
-	NL80211_ATTR_STA_AID,
-	NL80211_ATTR_STA_FLAGS,
-	NL80211_ATTR_STA_LISTEN_INTERVAL,
-	NL80211_ATTR_STA_SUPPORTED_RATES,
-	NL80211_ATTR_STA_VLAN,
-	NL80211_ATTR_STA_INFO,
-
-	NL80211_ATTR_WIPHY_BANDS,
-
-	NL80211_ATTR_MNTR_FLAGS,
-
-	NL80211_ATTR_MESH_ID,
-	NL80211_ATTR_STA_PLINK_ACTION,
-	NL80211_ATTR_MPATH_NEXT_HOP,
-	NL80211_ATTR_MPATH_INFO,
-
-	NL80211_ATTR_BSS_CTS_PROT,
-	NL80211_ATTR_BSS_SHORT_PREAMBLE,
-	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
-
-	NL80211_ATTR_HT_CAPABILITY,
-
-	NL80211_ATTR_SUPPORTED_IFTYPES,
-
-	NL80211_ATTR_REG_ALPHA2,
-	NL80211_ATTR_REG_RULES,
-
-	NL80211_ATTR_MESH_CONFIG,
-
-	NL80211_ATTR_BSS_BASIC_RATES,
-
-	NL80211_ATTR_WIPHY_TXQ_PARAMS,
-	NL80211_ATTR_WIPHY_FREQ,
-	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-
-	NL80211_ATTR_KEY_DEFAULT_MGMT,
-
-	NL80211_ATTR_MGMT_SUBTYPE,
-	NL80211_ATTR_IE,
-
-	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
-
-	NL80211_ATTR_SCAN_FREQUENCIES,
-	NL80211_ATTR_SCAN_SSIDS,
-	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
-	NL80211_ATTR_BSS,
-
-	NL80211_ATTR_REG_INITIATOR,
-	NL80211_ATTR_REG_TYPE,
-
-	NL80211_ATTR_SUPPORTED_COMMANDS,
-
-	NL80211_ATTR_FRAME,
-	NL80211_ATTR_SSID,
-	NL80211_ATTR_AUTH_TYPE,
-	NL80211_ATTR_REASON_CODE,
-
-	NL80211_ATTR_KEY_TYPE,
-
-	NL80211_ATTR_MAX_SCAN_IE_LEN,
-	NL80211_ATTR_CIPHER_SUITES,
-
-	NL80211_ATTR_FREQ_BEFORE,
-	NL80211_ATTR_FREQ_AFTER,
-
-	NL80211_ATTR_FREQ_FIXED,
-
-
-	NL80211_ATTR_WIPHY_RETRY_SHORT,
-	NL80211_ATTR_WIPHY_RETRY_LONG,
-	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
-	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
-
-	NL80211_ATTR_TIMED_OUT,
-
-	NL80211_ATTR_USE_MFP,
-
-	NL80211_ATTR_STA_FLAGS2,
-
-	NL80211_ATTR_CONTROL_PORT,
-
-	NL80211_ATTR_TESTDATA,
-
-	NL80211_ATTR_PRIVACY,
-
-	NL80211_ATTR_DISCONNECTED_BY_AP,
-	NL80211_ATTR_STATUS_CODE,
-
-	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
-	NL80211_ATTR_CIPHER_SUITE_GROUP,
-	NL80211_ATTR_WPA_VERSIONS,
-	NL80211_ATTR_AKM_SUITES,
-
-	NL80211_ATTR_REQ_IE,
-	NL80211_ATTR_RESP_IE,
-
-	NL80211_ATTR_PREV_BSSID,
-
-	NL80211_ATTR_KEY,
-	NL80211_ATTR_KEYS,
-
-	NL80211_ATTR_PID,
-
-	NL80211_ATTR_4ADDR,
-
-	NL80211_ATTR_SURVEY_INFO,
-
-	NL80211_ATTR_PMKID,
-	NL80211_ATTR_MAX_NUM_PMKIDS,
-
-	NL80211_ATTR_DURATION,
-
-	NL80211_ATTR_COOKIE,
-
-	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
-
-	NL80211_ATTR_TX_RATES,
-
-	NL80211_ATTR_FRAME_MATCH,
-
-	NL80211_ATTR_ACK,
-
-	NL80211_ATTR_PS_STATE,
-
-	NL80211_ATTR_CQM,
-
-	NL80211_ATTR_LOCAL_STATE_CHANGE,
-
-	NL80211_ATTR_AP_ISOLATE,
-
-	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
-	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
-
-	NL80211_ATTR_TX_FRAME_TYPES,
-	NL80211_ATTR_RX_FRAME_TYPES,
-	NL80211_ATTR_FRAME_TYPE,
-
-	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-
-	NL80211_ATTR_SUPPORT_IBSS_RSN,
-
-	NL80211_ATTR_WIPHY_ANTENNA_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_RX,
-
-	NL80211_ATTR_MCAST_RATE,
-
-	NL80211_ATTR_OFFCHANNEL_TX_OK,
-
-	NL80211_ATTR_BSS_HT_OPMODE,
-
-	NL80211_ATTR_KEY_DEFAULT_TYPES,
-
-	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
-
-	NL80211_ATTR_MESH_SETUP,
-
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
-
-	NL80211_ATTR_SUPPORT_MESH_AUTH,
-	NL80211_ATTR_STA_PLINK_STATE,
-
-	NL80211_ATTR_WOWLAN_TRIGGERS,
-	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
-
-	NL80211_ATTR_SCHED_SCAN_INTERVAL,
-
-	NL80211_ATTR_INTERFACE_COMBINATIONS,
-	NL80211_ATTR_SOFTWARE_IFTYPES,
-
-	NL80211_ATTR_REKEY_DATA,
-
-	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
-	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
-
-	NL80211_ATTR_SCAN_SUPP_RATES,
-
-	NL80211_ATTR_HIDDEN_SSID,
-
-	NL80211_ATTR_IE_PROBE_RESP,
-	NL80211_ATTR_IE_ASSOC_RESP,
-
-	NL80211_ATTR_STA_WME,
-	NL80211_ATTR_SUPPORT_AP_UAPSD,
-
-	NL80211_ATTR_ROAM_SUPPORT,
-
-	NL80211_ATTR_SCHED_SCAN_MATCH,
-	NL80211_ATTR_MAX_MATCH_SETS,
-
-	NL80211_ATTR_PMKSA_CANDIDATE,
-
-	NL80211_ATTR_TX_NO_CCK_RATE,
-
-	NL80211_ATTR_TDLS_ACTION,
-	NL80211_ATTR_TDLS_DIALOG_TOKEN,
-	NL80211_ATTR_TDLS_OPERATION,
-	NL80211_ATTR_TDLS_SUPPORT,
-	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
-
-	NL80211_ATTR_DEVICE_AP_SME,
-
-	NL80211_ATTR_DONT_WAIT_FOR_ACK,
-
-	NL80211_ATTR_FEATURE_FLAGS,
-
-	NL80211_ATTR_PROBE_RESP_OFFLOAD,
-
-	NL80211_ATTR_PROBE_RESP,
-
-	NL80211_ATTR_DFS_REGION,
-
-	NL80211_ATTR_DISABLE_HT,
-	NL80211_ATTR_HT_CAPABILITY_MASK,
-
-	NL80211_ATTR_NOACK_MAP,
-
-	NL80211_ATTR_INACTIVITY_TIMEOUT,
-
-	NL80211_ATTR_RX_SIGNAL_DBM,
-
-	NL80211_ATTR_BG_SCAN_PERIOD,
-
-	NL80211_ATTR_WDEV,
-
-	NL80211_ATTR_USER_REG_HINT_TYPE,
-
-	NL80211_ATTR_CONN_FAILED_REASON,
-
-	NL80211_ATTR_AUTH_DATA,
-
-	NL80211_ATTR_VHT_CAPABILITY,
-
-	NL80211_ATTR_SCAN_FLAGS,
-
-	NL80211_ATTR_CHANNEL_WIDTH,
-	NL80211_ATTR_CENTER_FREQ1,
-	NL80211_ATTR_CENTER_FREQ2,
-
-	NL80211_ATTR_P2P_CTWINDOW,
-	NL80211_ATTR_P2P_OPPPS,
-
-	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
-
-	NL80211_ATTR_ACL_POLICY,
-
-	NL80211_ATTR_MAC_ADDRS,
-
-	NL80211_ATTR_MAC_ACL_MAX,
-
-	NL80211_ATTR_RADAR_EVENT,
-
-	NL80211_ATTR_EXT_CAPA,
-	NL80211_ATTR_EXT_CAPA_MASK,
-
-	NL80211_ATTR_STA_CAPABILITY,
-	NL80211_ATTR_STA_EXT_CAPABILITY,
-
-	NL80211_ATTR_PROTOCOL_FEATURES,
-	NL80211_ATTR_SPLIT_WIPHY_DUMP,
-
-	NL80211_ATTR_DISABLE_VHT,
-	NL80211_ATTR_VHT_CAPABILITY_MASK,
-
-	NL80211_ATTR_MDID,
-	NL80211_ATTR_IE_RIC,
-
-	NL80211_ATTR_CRIT_PROT_ID,
-	NL80211_ATTR_MAX_CRIT_PROT_DURATION,
-
-	NL80211_ATTR_PEER_AID,
-
-	NL80211_ATTR_COALESCE_RULE,
-
-	NL80211_ATTR_CH_SWITCH_COUNT,
-	NL80211_ATTR_CH_SWITCH_BLOCK_TX,
-	NL80211_ATTR_CSA_IES,
-	NL80211_ATTR_CSA_C_OFF_BEACON,
-	NL80211_ATTR_CSA_C_OFF_PRESP,
-
-	NL80211_ATTR_RXMGMT_FLAGS,
-
-	NL80211_ATTR_STA_SUPPORTED_CHANNELS,
-
-	NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,
-
-	NL80211_ATTR_HANDLE_DFS,
-
-	NL80211_ATTR_SUPPORT_5_MHZ,
-	NL80211_ATTR_SUPPORT_10_MHZ,
-
-	NL80211_ATTR_OPMODE_NOTIF,
-
-	NL80211_ATTR_VENDOR_ID,
-	NL80211_ATTR_VENDOR_SUBCMD,
-	NL80211_ATTR_VENDOR_DATA,
-	NL80211_ATTR_VENDOR_EVENTS,
-
-	NL80211_ATTR_QOS_MAP,
-
-	NL80211_ATTR_MAC_HINT,
-	NL80211_ATTR_WIPHY_FREQ_HINT,
-
-	NL80211_ATTR_MAX_AP_ASSOC_STA,
-
-	NL80211_ATTR_TDLS_PEER_CAPABILITY,
-
-	NL80211_ATTR_SOCKET_OWNER,
-
-	NL80211_ATTR_CSA_C_OFFSETS_TX,
-	NL80211_ATTR_MAX_CSA_COUNTERS,
-
-	NL80211_ATTR_TDLS_INITIATOR,
-
-	NL80211_ATTR_USE_RRM,
-
-	NL80211_ATTR_WIPHY_DYN_ACK,
-
-	NL80211_ATTR_TSID,
-	NL80211_ATTR_USER_PRIO,
-	NL80211_ATTR_ADMITTED_TIME,
-
-	NL80211_ATTR_SMPS_MODE,
-
-	NL80211_ATTR_OPER_CLASS,
-
-	NL80211_ATTR_MAC_MASK,
-
-	NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
-
-	NL80211_ATTR_EXT_FEATURES,
-
-	NL80211_ATTR_SURVEY_RADIO_STATS,
-
-	NL80211_ATTR_NETNS_FD,
-
-	NL80211_ATTR_SCHED_SCAN_DELAY,
-
-	NL80211_ATTR_REG_INDOOR,
-
-	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
-	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
-	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
-	NL80211_ATTR_SCHED_SCAN_PLANS,
-
-	NL80211_ATTR_PBSS,
-
-	NL80211_ATTR_BSS_SELECT,
-
-	NL80211_ATTR_STA_SUPPORT_P2P_PS,
-
-	NL80211_ATTR_PAD,
-
-	NL80211_ATTR_IFTYPE_EXT_CAPA,
-
-	NL80211_ATTR_MU_MIMO_GROUP_DATA,
-	NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
-
-	NL80211_ATTR_SCAN_START_TIME_TSF,
-	NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
-	NL80211_ATTR_MEASUREMENT_DURATION,
-	NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
-
-	NL80211_ATTR_MESH_PEER_AID,
-
-	NL80211_ATTR_NAN_MASTER_PREF,
-	NL80211_ATTR_BANDS,
-	NL80211_ATTR_NAN_FUNC,
-	NL80211_ATTR_NAN_MATCH,
-
-	NL80211_ATTR_FILS_KEK,
-	NL80211_ATTR_FILS_NONCES,
-
-	NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
-
-	NL80211_ATTR_BSSID,
-
-	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
-	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
-
-	NL80211_ATTR_TIMEOUT_REASON,
-
-	NL80211_ATTR_FILS_ERP_USERNAME,
-	NL80211_ATTR_FILS_ERP_REALM,
-	NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
-	NL80211_ATTR_FILS_ERP_RRK,
-	NL80211_ATTR_FILS_CACHE_ID,
-
-	NL80211_ATTR_PMK,
-
-	NL80211_ATTR_SCHED_SCAN_MULTI,
-	NL80211_ATTR_SCHED_SCAN_MAX_REQS,
-
-	NL80211_ATTR_WANT_1X_4WAY_HS,
-	NL80211_ATTR_PMKR0_NAME,
-	NL80211_ATTR_PORT_AUTHORIZED,
-
-	NL80211_ATTR_EXTERNAL_AUTH_ACTION,
-	NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
-
-	NL80211_ATTR_NSS,
-	NL80211_ATTR_ACK_SIGNAL,
-
-	NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
-
-	NL80211_ATTR_TXQ_STATS,
-	NL80211_ATTR_TXQ_LIMIT,
-	NL80211_ATTR_TXQ_MEMORY_LIMIT,
-	NL80211_ATTR_TXQ_QUANTUM,
-
-	NL80211_ATTR_HE_CAPABILITY,
-
-	NL80211_ATTR_FTM_RESPONDER,
-
-	NL80211_ATTR_FTM_RESPONDER_STATS,
-
-	NL80211_ATTR_TIMEOUT,
-
-	NL80211_ATTR_PEER_MEASUREMENTS,
-
-	NL80211_ATTR_AIRTIME_WEIGHT,
-	NL80211_ATTR_STA_TX_POWER_SETTING,
-	NL80211_ATTR_STA_TX_POWER,
-
-
-//tianyan@2021.7.27 modify for add wifi6 module start
-	NL80211_ATTR_SAE_PASSWORD,
-//tianyan@2021.7.27 modify for add wifi6 module end
-
-	NL80211_ATTR_TWT_RESPONDER,
-
-	NL80211_ATTR_HE_OBSS_PD,
-
-	NL80211_ATTR_WIPHY_EDMG_CHANNELS,
-	NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
-
-	NL80211_ATTR_VLAN_ID,
-
-	NL80211_ATTR_HE_BSS_COLOR,
-
-	NL80211_ATTR_IFTYPE_AKM_SUITES,
-
-	NL80211_ATTR_TID_CONFIG,
-
-	NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
-
-	NL80211_ATTR_PMK_LIFETIME,
-	NL80211_ATTR_PMK_REAUTH_THRESHOLD,
-
-	NL80211_ATTR_RECEIVE_MULTICAST,
-	NL80211_ATTR_WIPHY_FREQ_OFFSET,
-	NL80211_ATTR_CENTER_FREQ1_OFFSET,
-	NL80211_ATTR_SCAN_FREQ_KHZ,
-
-	NL80211_ATTR_HE_6GHZ_CAPABILITY,
-
-	NL80211_ATTR_FILS_DISCOVERY,
-
-	NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
-
-	NL80211_ATTR_S1G_CAPABILITY,
-	NL80211_ATTR_S1G_CAPABILITY_MASK,
-
-	NL80211_ATTR_SAE_PWE,
-
-	NL80211_ATTR_RECONNECT_REQUESTED,
-
-	NL80211_ATTR_SAR_SPEC,
-
-	NL80211_ATTR_DISABLE_HE,
-
-	/* add attributes here, update the policy in nl80211.c */
-
-	__NL80211_ATTR_AFTER_LAST,
-	NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
-	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
-};
-
-/* source-level API compatibility */
-#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
-#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
-#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
-
-/*
- * Allow user space programs to use #ifdef on new attributes by defining them
- * here
- */
-#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
-#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
-#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
-#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
-#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
-#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
-#define NL80211_ATTR_IE NL80211_ATTR_IE
-#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
-#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
-#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
-#define NL80211_ATTR_SSID NL80211_ATTR_SSID
-#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
-#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
-#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
-#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
-#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
-#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
-#define NL80211_ATTR_KEY NL80211_ATTR_KEY
-#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-#define NL80211_WIPHY_NAME_MAXLEN		64
-
-#define NL80211_MAX_SUPP_RATES			32
-#define NL80211_MAX_SUPP_HT_RATES		77
-#define NL80211_MAX_SUPP_REG_RULES		64
-#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
-#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
-#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
-#define NL80211_HT_CAPABILITY_LEN		26
-#define NL80211_VHT_CAPABILITY_LEN		12
-#define NL80211_HE_MIN_CAPABILITY_LEN           16
-#define NL80211_HE_MAX_CAPABILITY_LEN           54
-#define NL80211_MAX_NR_CIPHER_SUITES		5
-#define NL80211_MAX_NR_AKM_SUITES		2
-
-#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
-
-/* default RSSI threshold for scan results if none specified. */
-#define NL80211_SCAN_RSSI_THOLD_OFF		-300
-
-#define NL80211_CQM_TXE_MAX_INTVL		1800
-
-/**
- * enum nl80211_iftype - (virtual) interface types
- *
- * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
- * @NL80211_IFTYPE_ADHOC: independent BSS member
- * @NL80211_IFTYPE_STATION: managed BSS member
- * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
- *	are a bit special in that they must always be tied to a pre-existing
- *	AP type interface.
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
- *	and therefore can't be created in the normal ways, use the
- *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
- *	commands to create and destroy one
- * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
- *	This mode corresponds to the MIB variable dot11OCBActivated=true
- * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
- * These values are used with the %NL80211_ATTR_IFTYPE
- * to set the type of an interface.
- *
- */
-enum nl80211_iftype {
-	NL80211_IFTYPE_UNSPECIFIED,
-	NL80211_IFTYPE_ADHOC,
-	NL80211_IFTYPE_STATION,
-	NL80211_IFTYPE_AP,
-	NL80211_IFTYPE_AP_VLAN,
-	NL80211_IFTYPE_WDS,
-	NL80211_IFTYPE_MONITOR,
-	NL80211_IFTYPE_MESH_POINT,
-	NL80211_IFTYPE_P2P_CLIENT,
-	NL80211_IFTYPE_P2P_GO,
-	NL80211_IFTYPE_P2P_DEVICE,
-	NL80211_IFTYPE_OCB,
-	NL80211_IFTYPE_NAN,
-
-	/* keep last */
-	NUM_NL80211_IFTYPES,
-	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
-};
-
-/**
- * enum nl80211_sta_flags - station flags
- *
- * Station flags. When a station is added to an AP interface, it is
- * assumed to be already associated (and hence authenticated.)
- *
- * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
- * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
- * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- *	with short barker preamble
- * @NL80211_STA_FLAG_WME: station is WME/QoS capable
- * @NL80211_STA_FLAG_MFP: station uses management frame protection
- * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
- *	only be used in managed mode (even in the flags mask). Note that the
- *	flag can't be changed, it is only valid while adding a station, and
- *	attempts to change it will silently be ignored (rather than rejected
- *	as errors.)
- * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
- *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
- *	previously added station into associated state
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
-enum nl80211_sta_flags {
-	__NL80211_STA_FLAG_INVALID,
-	NL80211_STA_FLAG_AUTHORIZED,
-	NL80211_STA_FLAG_SHORT_PREAMBLE,
-	NL80211_STA_FLAG_WME,
-	NL80211_STA_FLAG_MFP,
-	NL80211_STA_FLAG_AUTHENTICATED,
-	NL80211_STA_FLAG_TDLS_PEER,
-	NL80211_STA_FLAG_ASSOCIATED,
-
-	/* keep last */
-	__NL80211_STA_FLAG_AFTER_LAST,
-	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_p2p_ps_status - station support of P2P PS
- *
- * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
- * @NUM_NL80211_P2P_PS_STATUS: number of values
- */
-enum nl80211_sta_p2p_ps_status {
-	NL80211_P2P_PS_UNSUPPORTED = 0,
-	NL80211_P2P_PS_SUPPORTED,
-
-	NUM_NL80211_P2P_PS_STATUS,
-};
-
-#define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
-
-/**
- * struct nl80211_sta_flag_update - station flags mask/set
- * @mask: mask of station flags to set
- * @set: which values to set them to
- *
- * Both mask and set contain bits as per &enum nl80211_sta_flags.
- */
-struct nl80211_sta_flag_update {
-	__u32 mask;
-	__u32 set;
-} __attribute__((packed));
-
-/**
- * enum nl80211_he_gi - HE guard interval
- * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
- * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
- * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
- */
-enum nl80211_he_gi {
-	NL80211_RATE_INFO_HE_GI_0_8,
-	NL80211_RATE_INFO_HE_GI_1_6,
-	NL80211_RATE_INFO_HE_GI_3_2,
-};
-
-/**
- * enum nl80211_he_ru_alloc - HE RU allocation values
- * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
- * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
- */
-enum nl80211_he_ru_alloc {
-	NL80211_RATE_INFO_HE_RU_ALLOC_26,
-	NL80211_RATE_INFO_HE_RU_ALLOC_52,
-	NL80211_RATE_INFO_HE_RU_ALLOC_106,
-	NL80211_RATE_INFO_HE_RU_ALLOC_242,
-	NL80211_RATE_INFO_HE_RU_ALLOC_484,
-	NL80211_RATE_INFO_HE_RU_ALLOC_996,
-	NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
-};
-
-/**
- * enum nl80211_rate_info - bitrate information
- *
- * These attribute types are used with %NL80211_STA_INFO_TXRATE
- * when getting information about the bitrate of a station.
- * There are 2 attributes for bitrate, a legacy one that represents
- * a 16-bit value, and new one that represents a 32-bit value.
- * If the rate value fits into 16 bit, both attributes are reported
- * with the same value. If the rate is too high to fit into 16 bits
- * (>6.5535Gbps) only 32-bit attribute is included.
- * User space tools encouraged to use the 32-bit attribute and fall
- * back to the 16-bit one for compatibility with older kernels.
- *
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
- * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
- * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
- * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
- *	same as 160 for purposes of the bitrates
- * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
- * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
- *	a legacy rate and will be reported as the actual bitrate, i.e.
- *	half the base (20 MHz) rate
- * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
- *	a legacy rate and will be reported as the actual bitrate, i.e.
- *	a quarter of the base (20 MHz) rate
- * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
- * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
- * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
- *	(u8, see &enum nl80211_he_gi)
- * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
- *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
-enum nl80211_rate_info {
-	__NL80211_RATE_INFO_INVALID,
-	NL80211_RATE_INFO_BITRATE,
-	NL80211_RATE_INFO_MCS,
-	NL80211_RATE_INFO_40_MHZ_WIDTH,
-	NL80211_RATE_INFO_SHORT_GI,
-	NL80211_RATE_INFO_BITRATE32,
-	NL80211_RATE_INFO_VHT_MCS,
-	NL80211_RATE_INFO_VHT_NSS,
-	NL80211_RATE_INFO_80_MHZ_WIDTH,
-	NL80211_RATE_INFO_80P80_MHZ_WIDTH,
-	NL80211_RATE_INFO_160_MHZ_WIDTH,
-	NL80211_RATE_INFO_10_MHZ_WIDTH,
-	NL80211_RATE_INFO_5_MHZ_WIDTH,
-	NL80211_RATE_INFO_HE_MCS,
-	NL80211_RATE_INFO_HE_NSS,
-	NL80211_RATE_INFO_HE_GI,
-	NL80211_RATE_INFO_HE_DCM,
-	NL80211_RATE_INFO_HE_RU_ALLOC,
-
-	/* keep last */
-	__NL80211_RATE_INFO_AFTER_LAST,
-	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_bss_param - BSS information collected by STA
- *
- * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
- * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
- * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
- * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
- * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
- */
-enum nl80211_sta_bss_param {
-	__NL80211_STA_BSS_PARAM_INVALID,
-	NL80211_STA_BSS_PARAM_CTS_PROT,
-	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
-	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
-	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
-	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
-
-	/* keep last */
-	__NL80211_STA_BSS_PARAM_AFTER_LAST,
-	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_info - station information
- *
- * These attribute types are used with %NL80211_ATTR_STA_INFO
- * when getting information about a station.
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
- *	(u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
- *	(u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
- *	(u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
- *	(u64, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
- *	(u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
- *	(u32, to this station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
- *	(u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
- * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
- *	(see %enum nl80211_plink_state)
- * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
- *	attribute, like NL80211_STA_INFO_TX_BITRATE.
- * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
- *     containing info as possible, see &enum nl80211_sta_bss_param
- * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
- * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
- * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
- * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
- *	non-peer STA
- * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
- *	Contains a nested array of signal strength attributes (u8, dBm)
- * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
- *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- *	802.11 header (u32, kbps)
- * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
- *	(u64)
- * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
- * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
- *	for beacons only (u8, dBm)
- * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
- *	This is a nested attribute where each the inner attribute number is the
- *	TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
- *	each one of those is again nested with &enum nl80211_tid_stats
- *	attributes carrying the actual values.
- * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
- *	received from the station (u64, usec)
- * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
- * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data)
- *	ACK frame (s8, dBm)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-enum nl80211_sta_info {
-	__NL80211_STA_INFO_INVALID,
-	NL80211_STA_INFO_INACTIVE_TIME,
-	NL80211_STA_INFO_RX_BYTES,
-	NL80211_STA_INFO_TX_BYTES,
-	NL80211_STA_INFO_LLID,
-	NL80211_STA_INFO_PLID,
-	NL80211_STA_INFO_PLINK_STATE,
-	NL80211_STA_INFO_SIGNAL,
-	NL80211_STA_INFO_TX_BITRATE,
-	NL80211_STA_INFO_RX_PACKETS,
-	NL80211_STA_INFO_TX_PACKETS,
-	NL80211_STA_INFO_TX_RETRIES,
-	NL80211_STA_INFO_TX_FAILED,
-	NL80211_STA_INFO_SIGNAL_AVG,
-	NL80211_STA_INFO_RX_BITRATE,
-	NL80211_STA_INFO_BSS_PARAM,
-	NL80211_STA_INFO_CONNECTED_TIME,
-	NL80211_STA_INFO_STA_FLAGS,
-	NL80211_STA_INFO_BEACON_LOSS,
-	NL80211_STA_INFO_T_OFFSET,
-	NL80211_STA_INFO_LOCAL_PM,
-	NL80211_STA_INFO_PEER_PM,
-	NL80211_STA_INFO_NONPEER_PM,
-	NL80211_STA_INFO_RX_BYTES64,
-	NL80211_STA_INFO_TX_BYTES64,
-	NL80211_STA_INFO_CHAIN_SIGNAL,
-	NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
-	NL80211_STA_INFO_EXPECTED_THROUGHPUT,
-	NL80211_STA_INFO_RX_DROP_MISC,
-	NL80211_STA_INFO_BEACON_RX,
-	NL80211_STA_INFO_BEACON_SIGNAL_AVG,
-	NL80211_STA_INFO_TID_STATS,
-	NL80211_STA_INFO_RX_DURATION,
-	NL80211_STA_INFO_PAD,
-	NL80211_STA_INFO_ACK_SIGNAL,
-	NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG,
-
-	/* keep last */
-	__NL80211_STA_INFO_AFTER_LAST,
-	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_tid_stats - per TID statistics attributes
- * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
- * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
- * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
- *	attempted to transmit; u64)
- * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
- *	transmitted MSDUs (not counting the first attempt; u64)
- * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
- *	MSDUs (u64)
- * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
- * @NUM_NL80211_TID_STATS: number of attributes here
- * @NL80211_TID_STATS_MAX: highest numbered attribute here
- */
-enum nl80211_tid_stats {
-	__NL80211_TID_STATS_INVALID,
-	NL80211_TID_STATS_RX_MSDU,
-	NL80211_TID_STATS_TX_MSDU,
-	NL80211_TID_STATS_TX_MSDU_RETRIES,
-	NL80211_TID_STATS_TX_MSDU_FAILED,
-	NL80211_TID_STATS_PAD,
-	NL80211_TID_STATS_TXQ_STATS,
-
-	/* keep last */
-	NUM_NL80211_TID_STATS,
-	NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
-};
-
-/**
- * enum nl80211_txq_stats - per TXQ statistics attributes
- * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
- * @NUM_NL80211_TXQ_STATS: number of attributes here
- * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
- * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
- *      backlogged
- * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
- * @NL80211_TXQ_STATS_DROPS: total number of packet drops
- * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
- * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
- * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
- *      (only for per-phy stats)
- * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
- * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
- * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
- * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
- * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
- */
-enum nl80211_txq_stats {
-	__NL80211_TXQ_STATS_INVALID,
-	NL80211_TXQ_STATS_BACKLOG_BYTES,
-	NL80211_TXQ_STATS_BACKLOG_PACKETS,
-	NL80211_TXQ_STATS_FLOWS,
-	NL80211_TXQ_STATS_DROPS,
-	NL80211_TXQ_STATS_ECN_MARKS,
-	NL80211_TXQ_STATS_OVERLIMIT,
-	NL80211_TXQ_STATS_OVERMEMORY,
-	NL80211_TXQ_STATS_COLLISIONS,
-	NL80211_TXQ_STATS_TX_BYTES,
-	NL80211_TXQ_STATS_TX_PACKETS,
-	NL80211_TXQ_STATS_MAX_FLOWS,
-
-	/* keep last */
-	NUM_NL80211_TXQ_STATS,
-	NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
-};
-
-/**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
- * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
- * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
- * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
- */
-enum nl80211_mpath_flags {
-	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
-	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
-	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
-	NL80211_MPATH_FLAG_FIXED =	1<<3,
-	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
-};
-
-/**
- * enum nl80211_mpath_info - mesh path information
- *
- * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
- * information about a mesh path.
- *
- * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_MPATH_INFO_SN: destination sequence number
- * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
- * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
- * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
- * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- *	currently defind
- * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
- */
-enum nl80211_mpath_info {
-	__NL80211_MPATH_INFO_INVALID,
-	NL80211_MPATH_INFO_FRAME_QLEN,
-	NL80211_MPATH_INFO_SN,
-	NL80211_MPATH_INFO_METRIC,
-	NL80211_MPATH_INFO_EXPTIME,
-	NL80211_MPATH_INFO_FLAGS,
-	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
-	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
-
-	/* keep last */
-	__NL80211_MPATH_INFO_AFTER_LAST,
-	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_iftype_attr - Interface type data attributes
- *
- * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
- *     for each interface type that supports the band data
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
- *     capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
- *     capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
- *     capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
- *     defined in HE capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
- *     defined
- * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_iftype_attr {
-	__NL80211_BAND_IFTYPE_ATTR_INVALID,
-
-	NL80211_BAND_IFTYPE_ATTR_IFTYPES,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
-	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
-
-	/* keep last */
-	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
-	NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_attr - band attributes
- * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
- *	an array of nested frequency attributes
- * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
- *	an array of nested bitrate attributes
- * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
- *	defined in 802.11n
- * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
- * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
- * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
- *	defined in 802.11ac
- * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
- *	attributes from &enum nl80211_band_iftype_attr
- * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
- * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_attr {
-	__NL80211_BAND_ATTR_INVALID,
-	NL80211_BAND_ATTR_FREQS,
-	NL80211_BAND_ATTR_RATES,
-
-	NL80211_BAND_ATTR_HT_MCS_SET,
-	NL80211_BAND_ATTR_HT_CAPA,
-	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
-	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
-
-	NL80211_BAND_ATTR_VHT_MCS_SET,
-	NL80211_BAND_ATTR_VHT_CAPA,
-	NL80211_BAND_ATTR_IFTYPE_DATA,
-
-	/* keep last */
-	__NL80211_BAND_ATTR_AFTER_LAST,
-	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
-
-/**
- * enum nl80211_wmm_rule - regulatory wmm rule
- *
- * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
- * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
- * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
- * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
- * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
- * @__NL80211_WMMR_LAST: Internal use.
- */
-enum nl80211_wmm_rule {
-	__NL80211_WMMR_INVALID,
-	NL80211_WMMR_CW_MIN,
-	NL80211_WMMR_CW_MAX,
-	NL80211_WMMR_AIFSN,
-	NL80211_WMMR_TXOP,
-
-	/* keep last */
-	__NL80211_WMMR_LAST,
-	NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
-};
-
-/**
- * enum nl80211_frequency_attr - frequency attributes
- * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
- * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
- *	regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * 	are permitted on this channel, this includes sending probe
- * 	requests, or modes of operation that require beaconing.
- * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- *	(100 * dBm).
- * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
- *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
- *	this channel is in this DFS state.
- * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
- *	channel as the control channel
- * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
- *	channel as the control channel
- * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
- *	as the primary or any of the secondary channels isn't possible,
- *	this includes 80+80 channels
- * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
- *	using this channel as the primary or any of the secondary channels
- *	isn't possible
- * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
- * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
- *	channel. A channel that has the INDOOR_ONLY attribute can only be
- *	used when there is a clear assessment that the device is operating in
- *	an indoor surroundings, i.e., it is connected to AC power (and not
- *	through portable DC inverters) or is under the control of a master
- *	that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
- *	channel if it's connected concurrently to a BSS on the same channel on
- *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
- *	off-channel on a channel that has the IR_CONCURRENT attribute set can be
- *	done when there is a clear assessment that the device is operating under
- *	the guidance of an authorized master, i.e., setting up a GO or TDLS
- *	off-channel while the device is also connected to an AP with DFS and
- *	radar detection on the UNII band (it is up to user-space, i.e.,
- *	wpa_supplicant to perform the required verifications). Using this
- *	attribute for IR is disallowed for master interfaces (IBSS, AP).
- * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
- *	This is a nested attribute that contains the wmm limitation per AC.
- *	(see &enum nl80211_wmm_rule)
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- *	currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
- *
- * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
- * for more information on the FCC description of the relaxations allowed
- * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
- */
-enum nl80211_frequency_attr {
-	__NL80211_FREQUENCY_ATTR_INVALID,
-	NL80211_FREQUENCY_ATTR_FREQ,
-	NL80211_FREQUENCY_ATTR_DISABLED,
-	NL80211_FREQUENCY_ATTR_NO_IR,
-	__NL80211_FREQUENCY_ATTR_NO_IBSS,
-	NL80211_FREQUENCY_ATTR_RADAR,
-	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-	NL80211_FREQUENCY_ATTR_DFS_STATE,
-	NL80211_FREQUENCY_ATTR_DFS_TIME,
-	NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
-	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
-	NL80211_FREQUENCY_ATTR_NO_80MHZ,
-	NL80211_FREQUENCY_ATTR_NO_160MHZ,
-	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
-	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
-	NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
-	NL80211_FREQUENCY_ATTR_NO_20MHZ,
-	NL80211_FREQUENCY_ATTR_NO_10MHZ,
-	NL80211_FREQUENCY_ATTR_WMM,
-
-	/* keep last */
-	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
-#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR
-#define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR
-#define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
-#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
-					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
-
-/**
- * enum nl80211_bitrate_attr - bitrate attributes
- * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
- * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
- *	in 2.4 GHz band.
- * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
- *	currently defined
- * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_bitrate_attr {
-	__NL80211_BITRATE_ATTR_INVALID,
-	NL80211_BITRATE_ATTR_RATE,
-	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
-
-	/* keep last */
-	__NL80211_BITRATE_ATTR_AFTER_LAST,
-	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
- * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
- *	code from the IE, and relies on the regulatory domain information
- *	structure passed by userspace (CRDA) from our wireless-regdb.
- *	If a channel is enabled but the country code indicates it should
- *	be disabled we disable the channel and re-enable it upon disassociation.
- */
-enum nl80211_reg_initiator {
-	NL80211_REGDOM_SET_BY_CORE,
-	NL80211_REGDOM_SET_BY_USER,
-	NL80211_REGDOM_SET_BY_DRIVER,
-	NL80211_REGDOM_SET_BY_COUNTRY_IE,
-};
-
-/**
- * enum nl80211_reg_type - specifies the type of regulatory domain
- * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
- *	to a specific country. When this is set you can count on the
- *	ISO / IEC 3166 alpha2 country code being valid.
- * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
- * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
- * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
- *	of an intersection between two regulatory domains -- the previously
- *	set regulatory domain on the system and the last accepted regulatory
- *	domain request to be processed.
- */
-enum nl80211_reg_type {
-	NL80211_REGDOM_TYPE_COUNTRY,
-	NL80211_REGDOM_TYPE_WORLD,
-	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
-	NL80211_REGDOM_TYPE_INTERSECTION,
-};
-
-/**
- * enum nl80211_reg_rule_attr - regulatory rule attributes
- * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
- * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- *	frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
- * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
- *	If not present or 0 default CAC time will be used.
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- *	currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_reg_rule_attr {
-	__NL80211_REG_RULE_ATTR_INVALID,
-	NL80211_ATTR_REG_RULE_FLAGS,
-
-	NL80211_ATTR_FREQ_RANGE_START,
-	NL80211_ATTR_FREQ_RANGE_END,
-	NL80211_ATTR_FREQ_RANGE_MAX_BW,
-
-	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
-	NL80211_ATTR_POWER_RULE_MAX_EIRP,
-
-	NL80211_ATTR_DFS_CAC_TIME,
-
-	/* keep last */
-	__NL80211_REG_RULE_ATTR_AFTER_LAST,
-	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- *	only report BSS with matching SSID.
- *	(This cannot be used together with BSSID.)
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- *	BSS in scan results. Filtering is turned off if not specified. Note that
- *	if this attribute is in a match set of its own, then it is treated as
- *	the default value for all matchsets with an SSID, rather than being a
- *	matchset of its own without an RSSI filter. This is due to problems with
- *	how this API was implemented in the past. Also, due to the same problem,
- *	the only way to create a matchset with only an RSSI filter (with this
- *	attribute) is if there's only a single matchset with the RSSI attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
- *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
- *	relative to current bss's RSSI.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
- *	BSS-es in the specified band is to be adjusted before doing
- *	RSSI-based BSS selection. The attribute value is a packed structure
- *	value as specified by &struct nl80211_bss_select_rssi_adjust.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
- *	(this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- *	attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_match_attr {
-	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
-
-	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
-	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
-
-	/* keep last */
-	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
-	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
-		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
-};
-
-/* only for backward compatibility */
-#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
-
-/**
- * enum nl80211_reg_rule_flags - regulatory rule flags
- *
- * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
- * @NL80211_RRF_NO_CCK: CCK modulation not allowed
- * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
- * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
- * @NL80211_RRF_DFS: DFS support is required to be used
- * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
- * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * 	this includes probe requests or modes of operation that require
- * 	beaconing.
- * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
- *	base on contiguous rules and wider channels will be allowed to cross
- *	multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
- * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
- * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
- * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
- * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
- */
-enum nl80211_reg_rule_flags {
-	NL80211_RRF_NO_OFDM		= 1<<0,
-	NL80211_RRF_NO_CCK		= 1<<1,
-	NL80211_RRF_NO_INDOOR		= 1<<2,
-	NL80211_RRF_NO_OUTDOOR		= 1<<3,
-	NL80211_RRF_DFS			= 1<<4,
-	NL80211_RRF_PTP_ONLY		= 1<<5,
-	NL80211_RRF_PTMP_ONLY		= 1<<6,
-	NL80211_RRF_NO_IR		= 1<<7,
-	__NL80211_RRF_NO_IBSS		= 1<<8,
-	NL80211_RRF_AUTO_BW		= 1<<11,
-	NL80211_RRF_IR_CONCURRENT	= 1<<12,
-	NL80211_RRF_NO_HT40MINUS	= 1<<13,
-	NL80211_RRF_NO_HT40PLUS		= 1<<14,
-	NL80211_RRF_NO_80MHZ		= 1<<15,
-	NL80211_RRF_NO_160MHZ		= 1<<16,
-};
-
-#define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
-#define NL80211_RRF_NO_IBSS		NL80211_RRF_NO_IR
-#define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
-#define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
-					 NL80211_RRF_NO_HT40PLUS)
-#define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
-
-/* For backport compatibility with older userspace */
-#define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
-
-/**
- * enum nl80211_dfs_regions - regulatory DFS regions
- *
- * @NL80211_DFS_UNSET: Country has no DFS master region specified
- * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
- * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
- * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
- */
-enum nl80211_dfs_regions {
-	NL80211_DFS_UNSET	= 0,
-	NL80211_DFS_FCC		= 1,
-	NL80211_DFS_ETSI	= 2,
-	NL80211_DFS_JP		= 3,
-};
-
-/**
- * enum nl80211_user_reg_hint_type - type of user regulatory hint
- *
- * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
- *	assumed if the attribute is not set.
- * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
- *	base station. Device drivers that have been tested to work
- *	properly to support this type of hint can enable these hints
- *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
- *	capability on the struct wiphy. The wireless core will
- *	ignore all cell base station hints until at least one device
- *	present has been registered with the wireless core that
- *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
- *	supported feature.
- * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
- *	platform is operating in an indoor environment.
- */
-enum nl80211_user_reg_hint_type {
-	NL80211_USER_REG_HINT_USER	= 0,
-	NL80211_USER_REG_HINT_CELL_BASE = 1,
-	NL80211_USER_REG_HINT_INDOOR    = 2,
-};
-
-/**
- * enum nl80211_survey_info - survey information
- *
- * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
- * when getting information about a survey.
- *
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
- *	was turned on (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
- *	channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
- *	channel was sensed busy
- * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
- *	receiving data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
- *	transmitting data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
- *	(on this channel or globally)
- * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- *	currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
- */
-enum nl80211_survey_info {
-	__NL80211_SURVEY_INFO_INVALID,
-	NL80211_SURVEY_INFO_FREQUENCY,
-	NL80211_SURVEY_INFO_NOISE,
-	NL80211_SURVEY_INFO_IN_USE,
-	NL80211_SURVEY_INFO_TIME,
-	NL80211_SURVEY_INFO_TIME_BUSY,
-	NL80211_SURVEY_INFO_TIME_EXT_BUSY,
-	NL80211_SURVEY_INFO_TIME_RX,
-	NL80211_SURVEY_INFO_TIME_TX,
-	NL80211_SURVEY_INFO_TIME_SCAN,
-	NL80211_SURVEY_INFO_PAD,
-
-	/* keep last */
-	__NL80211_SURVEY_INFO_AFTER_LAST,
-	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
-};
-
-/* keep old names for compatibility */
-#define NL80211_SURVEY_INFO_CHANNEL_TIME		NL80211_SURVEY_INFO_TIME
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY		NL80211_SURVEY_INFO_TIME_BUSY
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY	NL80211_SURVEY_INFO_TIME_EXT_BUSY
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX		NL80211_SURVEY_INFO_TIME_RX
-#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX		NL80211_SURVEY_INFO_TIME_TX
-
-/**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
- * Monitor configuration flags.
- *
- * @__NL80211_MNTR_FLAG_INVALID: reserved
- *
- * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
- * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
- * @NL80211_MNTR_FLAG_CONTROL: pass control frames
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- *	overrides all other flags.
- * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
- *	and ACK incoming unicast packets.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
- */
-enum nl80211_mntr_flags {
-	__NL80211_MNTR_FLAG_INVALID,
-	NL80211_MNTR_FLAG_FCSFAIL,
-	NL80211_MNTR_FLAG_PLCPFAIL,
-	NL80211_MNTR_FLAG_CONTROL,
-	NL80211_MNTR_FLAG_OTHER_BSS,
-	NL80211_MNTR_FLAG_COOK_FRAMES,
-	NL80211_MNTR_FLAG_ACTIVE,
-
-	/* keep last */
-	__NL80211_MNTR_FLAG_AFTER_LAST,
-	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_power_mode - mesh power save modes
- *
- * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
- *	not known or has not been set yet.
- * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
- *	in Awake state all the time.
- * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
- *	alternate between Active and Doze states, but will wake up for
- *	neighbor's beacons.
- * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
- *	alternate between Active and Doze states, but may not wake up
- *	for neighbor's beacons.
- *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
- */
-
-enum nl80211_mesh_power_mode {
-	NL80211_MESH_POWER_UNKNOWN,
-	NL80211_MESH_POWER_ACTIVE,
-	NL80211_MESH_POWER_LIGHT_SLEEP,
-	NL80211_MESH_POWER_DEEP_SLEEP,
-
-	__NL80211_MESH_POWER_AFTER_LAST,
-	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
- * active.
- *
- * @__NL80211_MESHCONF_INVALID: internal use
- *
- * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- *	millisecond units, used by the Peer Link Open message
- *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- *	millisecond units, used by the peer link management to close a peer link
- *
- * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- *	millisecond units
- *
- * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- *	on this mesh interface
- *
- * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- *	open retries that can be sent to establish a new peer link instance in a
- *	mesh
- *
- * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- *	point.
- *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
- *	peer links when we detect compatible mesh peers. Disabled if
- *	@NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
- *	set.
- *
- * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- *	containing a PREQ that an MP can send to a particular destination (path
- *	target)
- *
- * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- *	(in milliseconds)
- *
- * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- *	until giving up on a path discovery (in milliseconds)
- *
- * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- *	points receiving a PREQ shall consider the forwarding information from
- *	the root to be valid. (TU = time unit)
- *
- * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- *	TUs) during which an MP can send only one action frame containing a PREQ
- *	reference element
- *
- * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- *	that it takes for an HWMP information element to propagate across the
- *	mesh
- *
- * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
- *
- * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- *	source mesh point for path selection elements.
- *
- * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
- *	root announcements are transmitted.
- *
- * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- *	access to a broader network beyond the MBSS.  This is done via Root
- *	Announcement frames.
- *
- * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- *	TUs) during which a mesh STA can send only one Action frame containing a
- *	PERR element.
- *
- * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- *	or forwarding entity (default is TRUE - forwarding entity)
- *
- * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- *	threshold for average signal strength of candidate station to establish
- *	a peer link.
- *
- * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- *	to synchronize to for 11s default synchronization method
- *	(see 11C.12.2.2)
- *
- * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
- * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
- *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
- *	information to the root mesh STA to be valid.
- *
- * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
- *	proactive PREQs are transmitted.
- *
- * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
- *	(in TUs) during which a mesh STA can send only one Action frame
- *	containing a PREQ element for root path confirmation.
- *
- * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
- *	type &enum nl80211_mesh_power_mode (u32)
- *
- * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
- *
- * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
- *	established peering with for longer than this time (in seconds), then
- *	remove it from the STA's list of peers. You may set this to 0 to disable
- *	the removal of the STA. Default is 30 minutes.
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_meshconf_params {
-	__NL80211_MESHCONF_INVALID,
-	NL80211_MESHCONF_RETRY_TIMEOUT,
-	NL80211_MESHCONF_CONFIRM_TIMEOUT,
-	NL80211_MESHCONF_HOLDING_TIMEOUT,
-	NL80211_MESHCONF_MAX_PEER_LINKS,
-	NL80211_MESHCONF_MAX_RETRIES,
-	NL80211_MESHCONF_TTL,
-	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
-	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
-	NL80211_MESHCONF_PATH_REFRESH_TIME,
-	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
-	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
-	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
-	NL80211_MESHCONF_HWMP_ROOTMODE,
-	NL80211_MESHCONF_ELEMENT_TTL,
-	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
-	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
-	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
-	NL80211_MESHCONF_FORWARDING,
-	NL80211_MESHCONF_RSSI_THRESHOLD,
-	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
-	NL80211_MESHCONF_HT_OPMODE,
-	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
-	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
-	NL80211_MESHCONF_POWER_MODE,
-	NL80211_MESHCONF_AWAKE_WINDOW,
-	NL80211_MESHCONF_PLINK_TIMEOUT,
-
-	/* keep last */
-	__NL80211_MESHCONF_ATTR_AFTER_LAST,
-	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_setup_params - mesh setup parameters
- *
- * Mesh setup parameters.  These are used to start/join a mesh and cannot be
- * changed while the mesh is active.
- *
- * @__NL80211_MESH_SETUP_INVALID: Internal use
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- *	vendor specific path selection algorithm or disable it to use the
- *	default HWMP.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- *	vendor specific path metric or disable it to use the default Airtime
- *	metric.
- *
- * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- *	robust security network ie, or a vendor specific information element
- *	that vendors will use to identify the path selection methods and
- *	metrics in use.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- *	daemon will be authenticating mesh candidates.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- *	daemon will be securing peer link frames.  AMPE is a secured version of
- *	Mesh Peering Management (MPM) and is implemented with the assistance of
- *	a userspace daemon.  When this flag is set, the kernel will send peer
- *	management frames to a userspace daemon that will implement AMPE
- *	functionality (security capabilities selection, key confirmation, and
- *	key management).  When the flag is unset (default), the kernel can
- *	autonomously complete (unsecured) mesh peering without the need of a
- *	userspace daemon.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- *	vendor specific synchronization method or disable it to use the default
- *	neighbor offset synchronization
- *
- * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
- *	implement an MPM which handles peer allocation and state.
- *
- * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
- *	method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
- *	Default is no authentication method required.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- *
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
- */
-enum nl80211_mesh_setup_params {
-	__NL80211_MESH_SETUP_INVALID,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
-	NL80211_MESH_SETUP_IE,
-	NL80211_MESH_SETUP_USERSPACE_AUTH,
-	NL80211_MESH_SETUP_USERSPACE_AMPE,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
-	NL80211_MESH_SETUP_USERSPACE_MPM,
-	NL80211_MESH_SETUP_AUTH_PROTOCOL,
-
-	/* keep last */
-	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
-	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_txq_attr - TX queue parameter attributes
- * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
- * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
- *	disabled
- * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
- */
-enum nl80211_txq_attr {
-	__NL80211_TXQ_ATTR_INVALID,
-	NL80211_TXQ_ATTR_AC,
-	NL80211_TXQ_ATTR_TXOP,
-	NL80211_TXQ_ATTR_CWMIN,
-	NL80211_TXQ_ATTR_CWMAX,
-	NL80211_TXQ_ATTR_AIFS,
-
-	/* keep last */
-	__NL80211_TXQ_ATTR_AFTER_LAST,
-	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
-};
-
-enum nl80211_ac {
-	NL80211_AC_VO,
-	NL80211_AC_VI,
-	NL80211_AC_BE,
-	NL80211_AC_BK,
-	NL80211_NUM_ACS
-};
-
-/* backward compat */
-#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC
-#define NL80211_TXQ_Q_VO	NL80211_AC_VO
-#define NL80211_TXQ_Q_VI	NL80211_AC_VI
-#define NL80211_TXQ_Q_BE	NL80211_AC_BE
-#define NL80211_TXQ_Q_BK	NL80211_AC_BK
-
-/**
- * enum nl80211_channel_type - channel type
- * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
- * @NL80211_CHAN_HT20: 20 MHz HT channel
- * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
- *	below the control channel
- * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
- *	above the control channel
- */
-enum nl80211_channel_type {
-	NL80211_CHAN_NO_HT,
-	NL80211_CHAN_HT20,
-	NL80211_CHAN_HT40MINUS,
-	NL80211_CHAN_HT40PLUS
-};
-
-/**
- * enum nl80211_chan_width - channel width definitions
- *
- * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
- * attribute.
- *
- * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
- * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
- * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
- * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
- * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
- * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
- * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
- */
-enum nl80211_chan_width {
-	NL80211_CHAN_WIDTH_20_NOHT,
-	NL80211_CHAN_WIDTH_20,
-	NL80211_CHAN_WIDTH_40,
-	NL80211_CHAN_WIDTH_80,
-	NL80211_CHAN_WIDTH_80P80,
-	NL80211_CHAN_WIDTH_160,
-	NL80211_CHAN_WIDTH_5,
-	NL80211_CHAN_WIDTH_10,
-};
-
-/**
- * enum nl80211_bss_scan_width - control channel width for a BSS
- *
- * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
- *
- * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
- * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
- * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
- */
-enum nl80211_bss_scan_width {
-	NL80211_BSS_CHAN_WIDTH_20,
-	NL80211_BSS_CHAN_WIDTH_10,
-	NL80211_BSS_CHAN_WIDTH_5,
-};
-
-/**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
- * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
- * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
- * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
- *	(if @NL80211_BSS_PRESP_DATA is present then this is known to be
- *	from a probe response, otherwise it may be from the same beacon
- *	that the NL80211_BSS_BEACON_TSF will be from)
- * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
- * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
- * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- *	raw information elements from the probe response/beacon (bin);
- *	if the %NL80211_BSS_BEACON_IES attribute is present and the data is
- *	different then the IEs here are from a Probe Response frame; otherwise
- *	they are from a Beacon frame.
- *	However, if the driver does not indicate the source of the IEs, these
- *	IEs may be from either frame subtype.
- *	If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
- *	data here is known to be from a probe response, without any heuristics.
- * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
- *	in mBm (100 * dBm) (s32)
- * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
- *	in unspecified units, scaled to 0..100 (u8)
- * @NL80211_BSS_STATUS: status, if this BSS is "used"
- * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
- * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
- *	elements from a Beacon frame (bin); not present if no Beacon frame has
- *	yet been received
- * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
- *	(u32, enum nl80211_bss_scan_width)
- * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
- *	(not present if no beacon frame has been received yet)
- * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
- *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
- * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
- *	was last updated by a received frame. The value is expected to be
- *	accurate to about 10ms. (u64, nanoseconds)
- * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
- *	octet of the timestamp field of the last beacon/probe received for
- *	this BSS. The time is the TSF of the BSS specified by
- *	@NL80211_BSS_PARENT_BSSID. (u64).
- * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
- *	is set.
- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
- *	Contains a nested array of signal strength attributes (u8, dBm),
- *	using the nesting index as the antenna number.
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
-enum nl80211_bss {
-	__NL80211_BSS_INVALID,
-	NL80211_BSS_BSSID,
-	NL80211_BSS_FREQUENCY,
-	NL80211_BSS_TSF,
-	NL80211_BSS_BEACON_INTERVAL,
-	NL80211_BSS_CAPABILITY,
-	NL80211_BSS_INFORMATION_ELEMENTS,
-	NL80211_BSS_SIGNAL_MBM,
-	NL80211_BSS_SIGNAL_UNSPEC,
-	NL80211_BSS_STATUS,
-	NL80211_BSS_SEEN_MS_AGO,
-	NL80211_BSS_BEACON_IES,
-	NL80211_BSS_CHAN_WIDTH,
-	NL80211_BSS_BEACON_TSF,
-	NL80211_BSS_PRESP_DATA,
-	NL80211_BSS_LAST_SEEN_BOOTTIME,
-	NL80211_BSS_PAD,
-	NL80211_BSS_PARENT_TSF,
-	NL80211_BSS_PARENT_BSSID,
-	NL80211_BSS_CHAIN_SIGNAL,
-
-	/* keep last */
-	__NL80211_BSS_AFTER_LAST,
-	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
- *	Note that this is no longer used since cfg80211 no longer
- *	keeps track of whether or not authentication was done with
- *	a given BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
- * The BSS status is a BSS attribute in scan dumps, which
- * indicates the status the interface has wrt. this BSS.
- */
-enum nl80211_bss_status {
-	NL80211_BSS_STATUS_AUTHENTICATED,
-	NL80211_BSS_STATUS_ASSOCIATED,
-	NL80211_BSS_STATUS_IBSS_JOINED,
-};
-
-/**
- * enum nl80211_auth_type - AuthenticationType
- *
- * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
- * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
- * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
- * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
- * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
- *	trying multiple times); this is invalid in netlink -- leave out
- *	the attribute for this on CONNECT commands.
- */
-enum nl80211_auth_type {
-	NL80211_AUTHTYPE_OPEN_SYSTEM,
-	NL80211_AUTHTYPE_SHARED_KEY,
-	NL80211_AUTHTYPE_FT,
-	NL80211_AUTHTYPE_NETWORK_EAP,
-	NL80211_AUTHTYPE_SAE,
-	NL80211_AUTHTYPE_FILS_SK,
-	NL80211_AUTHTYPE_FILS_SK_PFS,
-	NL80211_AUTHTYPE_FILS_PK,
-
-	/* keep last */
-	__NL80211_AUTHTYPE_NUM,
-	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
-	NL80211_AUTHTYPE_AUTOMATIC
-};
-
-/**
- * enum nl80211_key_type - Key Type
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
- * @NUM_NL80211_KEYTYPES: number of defined key types
- */
-enum nl80211_key_type {
-	NL80211_KEYTYPE_GROUP,
-	NL80211_KEYTYPE_PAIRWISE,
-	NL80211_KEYTYPE_PEERKEY,
-
-	NUM_NL80211_KEYTYPES
-};
-
-/**
- * enum nl80211_mfp - Management frame protection state
- * @NL80211_MFP_NO: Management frame protection not used
- * @NL80211_MFP_REQUIRED: Management frame protection required
- * @NL80211_MFP_OPTIONAL: Management frame protection is optional
- */
-enum nl80211_mfp {
-	NL80211_MFP_NO,
-	NL80211_MFP_REQUIRED,
-	NL80211_MFP_OPTIONAL,
-};
-
-enum nl80211_wpa_versions {
-	NL80211_WPA_VERSION_1 = 1 << 0,
-	NL80211_WPA_VERSION_2 = 1 << 1,
-//tianyan@2021.7.27 modify for add wifi6 module start
-	NL80211_WPA_VERSION_3 = 1 << 2,
-//tianyan@2021.7.27 modify for add wifi6 module end
-};
-
-/**
- * enum nl80211_key_default_types - key default types
- * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
- * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
- *	unicast key
- * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
- *	multicast key
- * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
- */
-enum nl80211_key_default_types {
-	__NL80211_KEY_DEFAULT_TYPE_INVALID,
-	NL80211_KEY_DEFAULT_TYPE_UNICAST,
-	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
-
-	NUM_NL80211_KEY_DEFAULT_TYPES
-};
-
-/**
- * enum nl80211_key_attributes - key attributes
- * @__NL80211_KEY_INVALID: invalid
- * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
- * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
- *	specified the default depends on whether a MAC address was
- *	given with the command using the key or not (u32)
- * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
- */
-enum nl80211_key_attributes {
-	__NL80211_KEY_INVALID,
-	NL80211_KEY_DATA,
-	NL80211_KEY_IDX,
-	NL80211_KEY_CIPHER,
-	NL80211_KEY_SEQ,
-	NL80211_KEY_DEFAULT,
-	NL80211_KEY_DEFAULT_MGMT,
-	NL80211_KEY_TYPE,
-	NL80211_KEY_DEFAULT_TYPES,
-
-	/* keep last */
-	__NL80211_KEY_AFTER_LAST,
-	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_tx_rate_attributes - TX rate set attributes
- * @__NL80211_TXRATE_INVALID: invalid
- * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
- *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
- *	1 = 500 kbps) but without the IE length restriction (at most
- *	%NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
- *	in an array of MCS numbers.
- * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
- *	see &struct nl80211_txrate_vht
- * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
-enum nl80211_tx_rate_attributes {
-	__NL80211_TXRATE_INVALID,
-	NL80211_TXRATE_LEGACY,
-	NL80211_TXRATE_HT,
-	NL80211_TXRATE_VHT,
-	NL80211_TXRATE_GI,
-
-	/* keep last */
-	__NL80211_TXRATE_AFTER_LAST,
-	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
-};
-
-#define NL80211_TXRATE_MCS NL80211_TXRATE_HT
-#define NL80211_VHT_NSS_MAX		8
-
-/**
- * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
- * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
- */
-struct nl80211_txrate_vht {
-	__u16 mcs[NL80211_VHT_NSS_MAX];
-};
-
-enum nl80211_txrate_gi {
-	NL80211_TXRATE_DEFAULT_GI,
-	NL80211_TXRATE_FORCE_SGI,
-	NL80211_TXRATE_FORCE_LGI,
-};
-
-/**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
- * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
- *	since newer kernel versions may support more bands
- */
-enum nl80211_band {
-	NL80211_BAND_2GHZ,
-	NL80211_BAND_5GHZ,
-	NL80211_BAND_60GHZ,
-
-	NUM_NL80211_BANDS,
-};
-
-/**
- * enum nl80211_ps_state - powersave state
- * @NL80211_PS_DISABLED: powersave is disabled
- * @NL80211_PS_ENABLED: powersave is enabled
- */
-enum nl80211_ps_state {
-	NL80211_PS_DISABLED,
-	NL80211_PS_ENABLED,
-};
-
-/**
- * enum nl80211_attr_cqm - connection quality monitor attributes
- * @__NL80211_ATTR_CQM_INVALID: invalid
- * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
- *	the threshold for the RSSI level at which an event will be sent. Zero
- *	to disable.  Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
- *	set, multiple values can be supplied as a low-to-high sorted array of
- *	threshold values in dBm.  Events will be sent when the RSSI value
- *	crosses any of the thresholds.
- * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
- *	the minimum amount the RSSI level must change after an event before a
- *	new event may be issued (to reduce effects of RSSI oscillation).
- * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
- * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
- *	consecutive packets were not acknowledged by the peer
- * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
- *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
- *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
- *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
- * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
- *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
- *	checked.
- * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
- *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
- *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
- *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
- * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
- *	loss event
- * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
- *	RSSI threshold event.
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
-enum nl80211_attr_cqm {
-	__NL80211_ATTR_CQM_INVALID,
-	NL80211_ATTR_CQM_RSSI_THOLD,
-	NL80211_ATTR_CQM_RSSI_HYST,
-	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
-	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
-	NL80211_ATTR_CQM_TXE_RATE,
-	NL80211_ATTR_CQM_TXE_PKTS,
-	NL80211_ATTR_CQM_TXE_INTVL,
-	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
-	NL80211_ATTR_CQM_RSSI_LEVEL,
-
-	/* keep last */
-	__NL80211_ATTR_CQM_AFTER_LAST,
-	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
- *      configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- *      configured threshold
- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
- */
-enum nl80211_cqm_rssi_threshold_event {
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
-	NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
-};
-
-
-/**
- * enum nl80211_tx_power_setting - TX power adjustment
- * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
- * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
- * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
- */
-enum nl80211_tx_power_setting {
-	NL80211_TX_POWER_AUTOMATIC,
-	NL80211_TX_POWER_LIMITED,
-	NL80211_TX_POWER_FIXED,
-};
-
-/**
- * enum nl80211_packet_pattern_attr - packet pattern attribute
- * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
- *	a zero bit are ignored
- * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
- *	a bit for each byte in the pattern. The lowest-order bit corresponds
- *	to the first byte of the pattern, but the bytes of the pattern are
- *	in a little-endian-like format, i.e. the 9th byte of the pattern
- *	corresponds to the lowest-order bit in the second byte of the mask.
- *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- *	xx indicates "don't care") would be represented by a pattern of
- *	twelve zero bytes, and a mask of "0xed,0x01".
- *	Note that the pattern matching is done as though frames were not
- *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- *	first (including SNAP header unpacking) and then matched.
- * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
- *	these fixed number of bytes of received packet
- * @NUM_NL80211_PKTPAT: number of attributes
- * @MAX_NL80211_PKTPAT: max attribute number
- */
-enum nl80211_packet_pattern_attr {
-	__NL80211_PKTPAT_INVALID,
-	NL80211_PKTPAT_MASK,
-	NL80211_PKTPAT_PATTERN,
-	NL80211_PKTPAT_OFFSET,
-
-	NUM_NL80211_PKTPAT,
-	MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
-};
-
-/**
- * struct nl80211_pattern_support - packet pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
- * @max_pkt_offset: maximum Rx packet offset
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
- * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
- * %NL80211_ATTR_COALESCE_RULE in the capability information given
- * by the kernel to userspace.
- */
-struct nl80211_pattern_support {
-	__u32 max_patterns;
-	__u32 min_pattern_len;
-	__u32 max_pattern_len;
-	__u32 max_pkt_offset;
-} __attribute__((packed));
-
-/* only for backward compatibility */
-#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
-#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
-#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
-#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
-#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
-#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
-#define nl80211_wowlan_pattern_support nl80211_pattern_support
-
-/**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- *	the chip into a special state -- works best with chips that have
- *	support for low-power operation already (flag)
- *	Note that this mode is incompatible with all of the others, if
- *	any others are even supported by the device.
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- *	is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
- *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- *	which are passed in an array of nested attributes, each nested attribute
- *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *	Each pattern defines a wakeup packet. Packet offset is associated with
- *	each pattern which is used while matching the pattern. The matching is
- *	done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
- *	pattern matching is done after the packet is converted to the MSDU.
- *
- *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- *	carrying a &struct nl80211_pattern_support.
- *
- *	When reporting wakeup. it is a u32 attribute containing the 0-based
- *	index of the pattern that caused the wakeup, in the patterns passed
- *	to the kernel when configuring.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- *	used when setting, used only to indicate that GTK rekeying is supported
- *	by the device (flag)
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
- *	done by the device) (flag)
- * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
- *	packet (flag)
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- *	(on devices that have rfkill in the device) (flag)
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
- *	the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
- *	may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
- *	attribute contains the original length.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
- *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
- *	attribute if the packet was truncated somewhere.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
- *	802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
- *	be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
- *	contains the original length.
- * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
- *	packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
- *	attribute if the packet was truncated somewhere.
- * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
- *	"TCP connection wakeup" for more details. This is a nested attribute
- *	containing the exact information for establishing and keeping alive
- *	the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
- *	wakeup packet was received on the TCP connection
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
- *	TCP connection was lost or failed to be established
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
- *	the TCP connection ran out of tokens to use for data to send to the
- *	service
- * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
- *	is detected.  This is a nested attribute that contains the
- *	same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
- *	specifies how the scan is performed (e.g. the interval, the
- *	channels to scan and the initial delay) as well as the scan
- *	results that will trigger a wake (i.e. the matchsets).  This
- *	attribute is also sent in a response to
- *	@NL80211_CMD_GET_WIPHY, indicating the number of match sets
- *	supported by the driver (u32).
- * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
- *	containing an array with information about what triggered the
- *	wake up.  If no elements are present in the array, it means
- *	that the information is not available.  If more than one
- *	element is present, it means that more than one match
- *	occurred.
- *	Each element in the array is a nested attribute that contains
- *	one optional %NL80211_ATTR_SSID attribute and one optional
- *	%NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of
- *	these attributes must be present.  If
- *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
- *	frequency, it means that the match occurred in more than one
- *	channel.
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- *
- * These nested attributes are used to configure the wakeup triggers and
- * to report the wakeup reason(s).
- */
-enum nl80211_wowlan_triggers {
-	__NL80211_WOWLAN_TRIG_INVALID,
-	NL80211_WOWLAN_TRIG_ANY,
-	NL80211_WOWLAN_TRIG_DISCONNECT,
-	NL80211_WOWLAN_TRIG_MAGIC_PKT,
-	NL80211_WOWLAN_TRIG_PKT_PATTERN,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
-	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
-	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
-	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
-	NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
-	NL80211_WOWLAN_TRIG_TCP_CONNECTION,
-	NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
-	NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
-	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
-	NL80211_WOWLAN_TRIG_NET_DETECT,
-	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
-
-	/* keep last */
-	NUM_NL80211_WOWLAN_TRIG,
-	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
-};
-
-/**
- * DOC: TCP connection wakeup
- *
- * Some devices can establish a TCP connection in order to be woken up by a
- * packet coming in from outside their network segment, or behind NAT. If
- * configured, the device will establish a TCP connection to the given
- * service, and periodically send data to that service. The first data
- * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
- * The data packets can optionally include a (little endian) sequence
- * number (in the TCP payload!) that is generated by the device, and, also
- * optionally, a token from a list of tokens. This serves as a keep-alive
- * with the service, and for NATed connections, etc.
- *
- * During this keep-alive period, the server doesn't send any data to the
- * client. When receiving data, it is compared against the wakeup pattern
- * (and mask) and if it matches, the host is woken up. Similarly, if the
- * connection breaks or cannot be established to start with, the host is
- * also woken up.
- *
- * Developer's note: ARP offload is required for this, otherwise TCP
- * response packets might not go through correctly.
- */
-
-/**
- * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
- * @start: starting value
- * @offset: offset of sequence number in packet
- * @len: length of the sequence value to write, 1 through 4
- *
- * Note: don't confuse with the TCP sequence number(s), this is for the
- * keepalive packet payload. The actual value is written into the packet
- * in little endian.
- */
-struct nl80211_wowlan_tcp_data_seq {
-	__u32 start, offset, len;
-};
-
-/**
- * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
- * @offset: offset of token in packet
- * @len: length of each token
- * @token_stream: stream of data to be used for the tokens, the length must
- *	be a multiple of @len for this to make sense
- */
-struct nl80211_wowlan_tcp_data_token {
-	__u32 offset, len;
-	__u8 token_stream[];
-};
-
-/**
- * struct nl80211_wowlan_tcp_data_token_feature - data token features
- * @min_len: minimum token length
- * @max_len: maximum token length
- * @bufsize: total available token buffer size (max size of @token_stream)
- */
-struct nl80211_wowlan_tcp_data_token_feature {
-	__u32 min_len, max_len, bufsize;
-};
-
-/**
- * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
- * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
- * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
- *	(in network byte order)
- * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
- *	route lookup when configured might be invalid by the time we suspend,
- *	and doing a route lookup when suspending is no longer possible as it
- *	might require ARP querying.
- * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
- *	socket and port will be allocated
- * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
- *	For feature advertising, a u32 attribute holding the maximum length
- *	of the data payload.
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
- *	(if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
- *	advertising it is just a flag
- * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
- *	see &struct nl80211_wowlan_tcp_data_token and for advertising see
- *	&struct nl80211_wowlan_tcp_data_token_feature.
- * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
- *	interval in feature advertising (u32)
- * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
- *	u32 attribute holding the maximum length
- * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
- *	feature advertising. The mask works like @NL80211_PKTPAT_MASK
- *	but on the TCP payload only.
- * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
- * @MAX_NL80211_WOWLAN_TCP: highest attribute number
- */
-enum nl80211_wowlan_tcp_attrs {
-	__NL80211_WOWLAN_TCP_INVALID,
-	NL80211_WOWLAN_TCP_SRC_IPV4,
-	NL80211_WOWLAN_TCP_DST_IPV4,
-	NL80211_WOWLAN_TCP_DST_MAC,
-	NL80211_WOWLAN_TCP_SRC_PORT,
-	NL80211_WOWLAN_TCP_DST_PORT,
-	NL80211_WOWLAN_TCP_DATA_PAYLOAD,
-	NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
-	NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
-	NL80211_WOWLAN_TCP_DATA_INTERVAL,
-	NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
-	NL80211_WOWLAN_TCP_WAKE_MASK,
-
-	/* keep last */
-	NUM_NL80211_WOWLAN_TCP,
-	MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
-};
-
-/**
- * struct nl80211_coalesce_rule_support - coalesce rule support information
- * @max_rules: maximum number of rules supported
- * @pat: packet pattern support information
- * @max_delay: maximum supported coalescing delay in msecs
- *
- * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
- * capability information given by the kernel to userspace.
- */
-struct nl80211_coalesce_rule_support {
-	__u32 max_rules;
-	struct nl80211_pattern_support pat;
-	__u32 max_delay;
-} __attribute__((packed));
-
-/**
- * enum nl80211_attr_coalesce_rule - coalesce rule attribute
- * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
- * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
- * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
- *	see &enum nl80211_coalesce_condition.
- * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
- *	after these fixed number of bytes of received packet
- * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
- * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
- */
-enum nl80211_attr_coalesce_rule {
-	__NL80211_COALESCE_RULE_INVALID,
-	NL80211_ATTR_COALESCE_RULE_DELAY,
-	NL80211_ATTR_COALESCE_RULE_CONDITION,
-	NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
-
-	/* keep last */
-	NUM_NL80211_ATTR_COALESCE_RULE,
-	NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
-};
-
-/**
- * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
- *	in a rule are matched.
- * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
- *	in a rule are not matched.
- */
-enum nl80211_coalesce_condition {
-	NL80211_COALESCE_CONDITION_MATCH,
-	NL80211_COALESCE_CONDITION_NO_MATCH
-};
-
-/**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
- *	can be chosen from this set of interface types (u32)
- * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
- *	flag attribute for each interface type in this set
- * @NUM_NL80211_IFACE_LIMIT: number of attributes
- * @MAX_NL80211_IFACE_LIMIT: highest attribute number
- */
-enum nl80211_iface_limit_attrs {
-	NL80211_IFACE_LIMIT_UNSPEC,
-	NL80211_IFACE_LIMIT_MAX,
-	NL80211_IFACE_LIMIT_TYPES,
-
-	/* keep last */
-	NUM_NL80211_IFACE_LIMIT,
-	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
-};
-
-/**
- * enum nl80211_if_combination_attrs -- interface combination attributes
- *
- * @NL80211_IFACE_COMB_UNSPEC: (reserved)
- * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
- *	for given interface types, see &enum nl80211_iface_limit_attrs.
- * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
- *	interfaces that can be created in this group. This number doesn't
- *	apply to interfaces purely managed in software, which are listed
- *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
- * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
- *	beacon intervals within this group must be all the same even for
- *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
- *	the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
- *	different channels may be used within this group.
- * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
- *	of supported channel widths for radar detection.
- * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
- *	of supported regulatory regions for radar detection.
- * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
- *	different beacon intervals supported by all the interface combinations
- *	in this group (if not present, all beacon intervals be identical).
- * @NUM_NL80211_IFACE_COMB: number of attributes
- * @MAX_NL80211_IFACE_COMB: highest attribute number
- *
- * Examples:
- *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
- *	=> allows an AP and a STA that must match BIs
- *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
- *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
- *
- *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- *	=> allows two STAs on different channels
- *
- *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
- *	=> allows a STA plus three P2P interfaces
- *
- * The list of these four possiblities could completely be contained
- * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
- * that any of these groups must match.
- *
- * "Combinations" of just a single interface will not be listed here,
- * a single interface of any valid interface type is assumed to always
- * be possible by itself. This means that implicitly, for each valid
- * interface type, the following group always exists:
- *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
- */
-enum nl80211_if_combination_attrs {
-	NL80211_IFACE_COMB_UNSPEC,
-	NL80211_IFACE_COMB_LIMITS,
-	NL80211_IFACE_COMB_MAXNUM,
-	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
-	NL80211_IFACE_COMB_NUM_CHANNELS,
-	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
-	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
-	NL80211_IFACE_COMB_BI_MIN_GCD,
-
-	/* keep last */
-	NUM_NL80211_IFACE_COMB,
-	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
-};
-
-
-/**
- * enum nl80211_plink_state - state of a mesh peer link finite state machine
- *
- * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existant mesh peer links
- * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
- *	this mesh peer
- * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
- *	from this mesh peer
- * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
- *	received from this mesh peer
- * @NL80211_PLINK_ESTAB: mesh peer link is established
- * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- *	plink are discarded
- * @NUM_NL80211_PLINK_STATES: number of peer link states
- * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
- */
-enum nl80211_plink_state {
-	NL80211_PLINK_LISTEN,
-	NL80211_PLINK_OPN_SNT,
-	NL80211_PLINK_OPN_RCVD,
-	NL80211_PLINK_CNF_RCVD,
-	NL80211_PLINK_ESTAB,
-	NL80211_PLINK_HOLDING,
-	NL80211_PLINK_BLOCKED,
-
-	/* keep last */
-	NUM_NL80211_PLINK_STATES,
-	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
-};
-
-/**
- * enum nl80211_plink_action - actions to perform in mesh peers
- *
- * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
- * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
- * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
- * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
- */
-enum plink_actions {
-	NL80211_PLINK_ACTION_NO_ACTION,
-	NL80211_PLINK_ACTION_OPEN,
-	NL80211_PLINK_ACTION_BLOCK,
-
-	NUM_NL80211_PLINK_ACTIONS,
-};
-
-
-#define NL80211_KCK_LEN			16
-#define NL80211_KEK_LEN			16
-#define NL80211_REPLAY_CTR_LEN		8
-
-/**
- * enum nl80211_rekey_data - attributes for GTK rekey offload
- * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
-enum nl80211_rekey_data {
-	__NL80211_REKEY_DATA_INVALID,
-	NL80211_REKEY_DATA_KEK,
-	NL80211_REKEY_DATA_KCK,
-	NL80211_REKEY_DATA_REPLAY_CTR,
-
-	/* keep last */
-	NUM_NL80211_REKEY_DATA,
-	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
-};
-
-/**
- * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
- * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
- *	Beacon frames)
- * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
- *	in Beacon frames
- * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
- *	element in Beacon frames but zero out each byte in the SSID
- */
-enum nl80211_hidden_ssid {
-	NL80211_HIDDEN_SSID_NOT_IN_USE,
-	NL80211_HIDDEN_SSID_ZERO_LEN,
-	NL80211_HIDDEN_SSID_ZERO_CONTENTS
-};
-
-/**
- * enum nl80211_sta_wme_attr - station WME attributes
- * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
- *	is the same as the AC bitmap in the QoS info field.
- * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
- *	as the MAX_SP field in the QoS info field (but already shifted down).
- * @__NL80211_STA_WME_AFTER_LAST: internal
- * @NL80211_STA_WME_MAX: highest station WME attribute
- */
-enum nl80211_sta_wme_attr {
-	__NL80211_STA_WME_INVALID,
-	NL80211_STA_WME_UAPSD_QUEUES,
-	NL80211_STA_WME_MAX_SP,
-
-	/* keep last */
-	__NL80211_STA_WME_AFTER_LAST,
-	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
- * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
- * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
- *	priority)
- * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
- * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
- * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
- *	(internal)
- * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
- *	(internal)
- */
-enum nl80211_pmksa_candidate_attr {
-	__NL80211_PMKSA_CANDIDATE_INVALID,
-	NL80211_PMKSA_CANDIDATE_INDEX,
-	NL80211_PMKSA_CANDIDATE_BSSID,
-	NL80211_PMKSA_CANDIDATE_PREAUTH,
-
-	/* keep last */
-	NUM_NL80211_PMKSA_CANDIDATE,
-	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
-};
-
-/**
- * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
- * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
- * @NL80211_TDLS_SETUP: Setup TDLS link
- * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
- * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
- * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
- */
-enum nl80211_tdls_operation {
-	NL80211_TDLS_DISCOVERY_REQ,
-	NL80211_TDLS_SETUP,
-	NL80211_TDLS_TEARDOWN,
-	NL80211_TDLS_ENABLE_LINK,
-	NL80211_TDLS_DISABLE_LINK,
-};
-
-/*
- * enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
-enum nl80211_ap_sme_features {
-};
- */
-
-/**
- * enum nl80211_feature_flags - device/driver features
- * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
- *	TX status to the socket error queue when requested with the
- *	socket option.
- * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
- * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
- *	the connected inactive stations in AP mode.
- * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
- *	to work properly to suppport receiving regulatory hints from
- *	cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
- *	here to reserve the value for API/ABI compatibility)
- * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
- *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
- *	mode
- * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
- * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
- * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
- * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
- * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
- *	OBSS scans and generate 20/40 BSS coex reports. This flag is used only
- *	for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
- * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
- *	setting
- * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
- *	powersave
- * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
- *	transitions for AP clients. Without this flag (and if the driver
- *	doesn't have the AP SME in the device) the driver supports adding
- *	stations only when they're associated and adds them in associated
- *	state (to later be transitioned into authorized), with this flag
- *	they should be added before even sending the authentication reply
- *	and then transitioned into authenticated, associated and authorized
- *	states using station flags.
- *	Note that even for drivers that support this, the default is to add
- *	stations in authenticated/associated state, so to add unauthenticated
- *	stations the authenticated/associated bits have to be set in the mask.
- * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
- *	(HT40, VHT 80/160 MHz) if this flag is set
- * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
- *	Peering Management entity which may be implemented by registering for
- *	beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
- *	still generated by the driver.
- * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
- *	interface. An active monitor interface behaves like a normal monitor
- *	interface, but gets added to the driver. It ensures that incoming
- *	unicast packets directed at the configured interface address get ACKed.
- * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
- *	channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
- *	lifetime of a BSS.
- * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
- *	Set IE to probe requests.
- * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
- *	to probe requests.
- * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
- *	requests sent to it by an AP.
- * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
- *	current tx power value into the TPC Report IE in the spectrum
- *	management TPC Report action frame, and in the Radio Measurement Link
- *	Measurement Report action frame.
- * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
- *	estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
- *	to enable dynack.
- * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
- *	multiplexing powersave, ie. can turn off all but one chain
- *	even on HT connections that should be using more chains.
- * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
- *	multiplexing powersave, ie. can turn off all but one chain
- *	and then wake the rest up as required after, for example,
- *	rts/cts handshake.
- * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
- *	TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
- *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
- *	needs to be able to handle Block-Ack agreements and other things.
- * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
- *	the vif's MAC address upon creation.
- *	See 'macaddr' field in the vif_params (cfg80211.h).
- * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
- *	operating as a TDLS peer.
- * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
- *	random MAC address during scan (if the device is unassociated); the
- *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
- *	address mask/value will be used.
- * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
- *	using a random MAC address for every scan iteration during scheduled
- *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
- *	be set for scheduled scan and the MAC address mask/value will be used.
- * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
- *	random MAC address for every scan iteration during "net detect", i.e.
- *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
- *	be set for scheduled scan and the MAC address mask/value will be used.
- */
-enum nl80211_feature_flags {
-	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
-	NL80211_FEATURE_HT_IBSS				= 1 << 1,
-	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
-	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
-	NL80211_FEATURE_SAE				= 1 << 5,
-	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
-	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
-	NL80211_FEATURE_AP_SCAN				= 1 << 8,
-	NL80211_FEATURE_VIF_TXPOWER			= 1 << 9,
-	NL80211_FEATURE_NEED_OBSS_SCAN			= 1 << 10,
-	NL80211_FEATURE_P2P_GO_CTWIN			= 1 << 11,
-	NL80211_FEATURE_P2P_GO_OPPPS			= 1 << 12,
-	/* bit 13 is reserved */
-	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
-	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
-	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
-	NL80211_FEATURE_ACTIVE_MONITOR			= 1 << 17,
-	NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE	= 1 << 18,
-	NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES	= 1 << 19,
-	NL80211_FEATURE_WFA_TPC_IE_IN_PROBES		= 1 << 20,
-	NL80211_FEATURE_QUIET				= 1 << 21,
-	NL80211_FEATURE_TX_POWER_INSERTION		= 1 << 22,
-	NL80211_FEATURE_ACKTO_ESTIMATION		= 1 << 23,
-	NL80211_FEATURE_STATIC_SMPS			= 1 << 24,
-	NL80211_FEATURE_DYNAMIC_SMPS			= 1 << 25,
-	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
-	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
-	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28,
-	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29,
-	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30,
-	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1 << 31,
-};
-
-/**
- * enum nl80211_ext_feature_index - bit index of extended features.
- * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
- * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
- *	can request to use RRM (see %NL80211_ATTR_USE_RRM) with
- *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
- *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
- * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
- *	sniffer which means that it can be configured to hear packets from
- *	certain groups which can be configured by the
- *	%NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
- *	or can be configured to follow a station by configuring the
- *	%NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
- * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
- *	time the scan started in scan results event. The time is the TSF of
- *	the BSS that the interface that requested the scan is connected to
- *	(if available).
- * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
- *	BSS that the interface that requested the scan is connected to
- *	(if available).
- * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
- *	channel dwell time.
- * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
- * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
- *	configuration (AP/mesh) with HT rates.
- * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
- *	configuration (AP/mesh) with VHT rates.
- * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
- *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
- * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
- *	in @NL80211_CMD_FRAME while not associated.
- * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
- *	randomized TA in @NL80211_CMD_FRAME while associated.
- * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
- *	for reporting BSSs with better RSSI than the current connected BSS
- *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
- * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
- *	%NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
- *	RSSI threshold values to monitor rather than exactly one threshold.
- * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
- *	authentication with %NL80211_CMD_CONNECT.
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
- *	handshake with PSK in station mode (PSK is passed as part of the connect
- *	and associate commands), doing it in the host might not be supported.
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
- *	handshake with 802.1X in station mode (will pass EAP frames to the host
- *	and accept the set_pmk/del_pmk commands), doing it in the host might not
- *	be supported.
- * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
- *	the max channel attribute in the FILS request params IE with the
- *	actual dwell time.
- * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
- *	response
- * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
- *	the first probe request in each channel at rate of at least 5.5Mbps.
- * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
- *	probe request tx deferral and suppression
- * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
- *	value in %NL80211_ATTR_USE_MFP.
- * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
- * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
- * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
- * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
- *	Device or driver will do all DFS-related actions by itself,
- *	informing user-space about CAC progress, radar detection event,
- *	channel change triggered by radar detection event.
- *	No need to start CAC from user-space, no need to react to
- *	"radar detected" event.
- * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
- *	receiving control port frames over nl80211 instead of the netdevice.
- * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack
- *	rssi if firmware support, this flag is to intimate about ack rssi
- *	support to nl80211.
- * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
- *      TXQs.
- * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
- *	SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
- * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
- *	except for supported rates from the probe request content if requested
- *	by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
- * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
- *	timing measurement responder role.
- *
- * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
- *      able to rekey an in-use key correctly. Userspace must not rekey PTK keys
- *      if this flag is not set. Ignoring this can leak clear text packets and/or
- *      freeze the connection.
- * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
- *      Individually Addressed Frames" from IEEE802.11-2016.
- *
- * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
- *	fairness for transmitted packets and has enabled airtime fairness
- *	scheduling.
- *
- * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
- *	(set/del PMKSA operations) in AP mode.
- *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- *	filtering of sched scan results using band specific RSSI thresholds.
- *
- * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
- *	to a station.
- *
- * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
- *	station mode (SAE password is passed as part of the connect command).
- *
- * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
- *	with VLAN tagged frames and separate VLAN-specific netdevs added using
- *	vconfig similarly to the Ethernet case.
- *
- * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
- *	feature, which prevents bufferbloat by using the expected transmission
- *	time to limit the amount of data buffered in the hardware.
- *
- * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
- *	and can receive key configuration for BIGTK using key indexes 6 and 7.
- * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
- *	protection as a client only and cannot transmit protected beacons.
- *
- * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
- *	forwarding of preauth frames over the control port. They are then
- *	handled as ordinary data frames.
- *
- * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
- *
- * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
- *      in IBSS mode, essentially by dropping their state.
- *
- * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
- *	are possible for multicast frames and those will be reported properly.
- *
- * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
- *	reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
- *	report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
- *	included in the scan request.
- *
- * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
- *	can report tx status for control port over nl80211 tx operations.
- *
- * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating
- *	Channel Validation (OCV) when using driver's SME for RSNA handshakes.
- *
- * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way
- *	handshake with PSK in AP mode (PSK is passed as part of the start AP
- *	command).
- *
- * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
- *	in AP mode (SAE password is passed as part of the start AP command).
- *
- * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
- *	frames transmission
- *
- * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
- *	unsolicited broadcast probe response transmission
- *
- * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
- *	configuration (AP/mesh) with HE rates.
- *
- * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
- *      exchange protocol.
- *
- * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
- *      exchange protocol.
- *
- * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
- *      frame protection for all management frames exchanged during the
- *      negotiation and range measurement procedure.
- *
- * @NUM_NL80211_EXT_FEATURES: number of extended features.
- * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
- */
-enum nl80211_ext_feature_index {
-	NL80211_EXT_FEATURE_VHT_IBSS,
-	NL80211_EXT_FEATURE_RRM,
-	NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
-	NL80211_EXT_FEATURE_SCAN_START_TIME,
-	NL80211_EXT_FEATURE_BSS_PARENT_TSF,
-	NL80211_EXT_FEATURE_SET_SCAN_DWELL,
-	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
-	NL80211_EXT_FEATURE_BEACON_RATE_HT,
-	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
-	NL80211_EXT_FEATURE_FILS_STA,
-	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
-	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
-	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
-	NL80211_EXT_FEATURE_CQM_RSSI_LIST,
-	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
-	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
-	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
-	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
-	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
-	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
-	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
-	NL80211_EXT_FEATURE_MFP_OPTIONAL,
-	NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
-	NL80211_EXT_FEATURE_LOW_POWER_SCAN,
-	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
-	NL80211_EXT_FEATURE_DFS_OFFLOAD,
-	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
-	NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
-	/* we renamed this - stay compatible */
-	NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
-	NL80211_EXT_FEATURE_TXQS,
-	NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
-	NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
-	NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
-	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
-	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
-	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
-	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
-	NL80211_EXT_FEATURE_EXT_KEY_ID,
-	NL80211_EXT_FEATURE_STA_TX_PWR,
-
-//tianyan@2021.7.27 modify for add wifi6 module start
-	NL80211_EXT_FEATURE_SAE_OFFLOAD,
-//tianyan@2021.7.27 modify for add wifi6 module end
-	NL80211_EXT_FEATURE_VLAN_OFFLOAD,
-	NL80211_EXT_FEATURE_AQL,
-	NL80211_EXT_FEATURE_BEACON_PROTECTION,
-	NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
-	NL80211_EXT_FEATURE_PROTECTED_TWT,
-	NL80211_EXT_FEATURE_DEL_IBSS_STA,
-	NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
-	NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
-	NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
-	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
-	NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
-	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
-	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
-	NL80211_EXT_FEATURE_FILS_DISCOVERY,
-	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
-	NL80211_EXT_FEATURE_BEACON_RATE_HE,
-	NL80211_EXT_FEATURE_SECURE_LTF,
-	NL80211_EXT_FEATURE_SECURE_RTT,
-	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
-
-	/* add new features before the definition below */
-	NUM_NL80211_EXT_FEATURES,
-	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
-};
-
-/**
- * enum nl80211_probe_resp_offload_support_attr - optional supported
- *	protocols for probe-response offloading by the driver/FW.
- *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
- *	Each enum value represents a bit in the bitmap of supported
- *	protocols. Typically a subset of probe-requests belonging to a
- *	supported protocol will be excluded from offload and uploaded
- *	to the host.
- *
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
- */
-enum nl80211_probe_resp_offload_support_attr {
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
-};
-
-/**
- * enum nl80211_connect_failed_reason - connection request failed reasons
- * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
- *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
- */
-enum nl80211_connect_failed_reason {
-	NL80211_CONN_FAIL_MAX_CLIENTS,
-	NL80211_CONN_FAIL_BLOCKED_CLIENT,
-};
-
-/**
- * enum nl80211_timeout_reason - timeout reasons
- *
- * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
- * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
- * @NL80211_TIMEOUT_AUTH: Authentication timed out.
- * @NL80211_TIMEOUT_ASSOC: Association timed out.
- */
-enum nl80211_timeout_reason {
-	NL80211_TIMEOUT_UNSPECIFIED,
-	NL80211_TIMEOUT_SCAN,
-	NL80211_TIMEOUT_AUTH,
-	NL80211_TIMEOUT_ASSOC,
-};
-
-/**
- * enum nl80211_scan_flags -  scan request control flags
- *
- * Scan request control flags are used to control the handling
- * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
- * requests.
- *
- * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
- * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
- * one of them can be used in the request.
- *
- * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
- * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
- * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
- *	as AP and the beaconing has already been configured. This attribute is
- *	dangerous because will destroy stations performance as a lot of frames
- *	will be lost while scanning off-channel, therefore it must be used only
- *	when really needed
- * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
- *	for scheduled scan: a different one for every scan iteration). When the
- *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
- *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only
- *	the masked bits will be preserved from the MAC address and the remainder
- *	randomised. If the attributes are not given full randomisation (46 bits,
- *	locally administered 1, multicast 0) is assumed.
- *	This flag must not be requested when the feature isn't supported, check
- *	the nl80211 feature flags for the device.
- * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
- *	request parameters IE in the probe request
- * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
- * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
- *	only the first probe req in the channel will be sent in high rate.
- * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
- *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
- *	and suppression (if it has received a broadcast Probe Response frame,
- *	Beacon frame or FILS Discovery frame from an AP that the STA considers
- *	a suitable candidate for (re-)association - suitable in terms of
- *	SSID and/or RSSI.
- * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
- *	accomplish the scan. Thus, this flag intends the driver to perform the
- *	scan request with lesser span/duration. It is specific to the driver
- *	implementations on how this is accomplished. Scan accuracy may get
- *	impacted with this flag.
- * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
- *	optimal possible power. Drivers can resort to their specific means to
- *	optimize the power. Scan accuracy may get impacted with this flag.
- * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
- *	results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
- *	possible scan results. This flag hints the driver to use the best
- *	possible scan configuration to improve the accuracy in scanning.
- *	Latency and power use may get impacted with this flag.
- * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
- *	request frames from this scan to avoid correlation/tracking being
- *	possible.
- * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
- *	only have supported rates and no additional capabilities (unless
- *	added by userspace explicitly.)
- */
-enum nl80211_scan_flags {
-	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
-	NL80211_SCAN_FLAG_FLUSH					= 1<<1,
-	NL80211_SCAN_FLAG_AP					= 1<<2,
-	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3,
-	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4,
-	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
-	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
-	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
-	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
-	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
-	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
-	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
-	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
-};
-
-/**
- * enum nl80211_acl_policy - access control policy
- *
- * Access control policy is applied on a MAC list set by
- * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
- * be used with %NL80211_ATTR_ACL_POLICY.
- *
- * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
- *	listed in ACL, i.e. allow all the stations which are not listed
- *	in ACL to authenticate.
- * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
- *	in ACL, i.e. deny all the stations which are not listed in ACL.
- */
-enum nl80211_acl_policy {
-	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
-	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
-};
-
-/**
- * enum nl80211_smps_mode - SMPS mode
- *
- * Requested SMPS mode (for AP mode)
- *
- * @NL80211_SMPS_OFF: SMPS off (use all antennas).
- * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
- * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
- *	turn on other antennas after CTS/RTS).
- */
-enum nl80211_smps_mode {
-	NL80211_SMPS_OFF,
-	NL80211_SMPS_STATIC,
-	NL80211_SMPS_DYNAMIC,
-
-	__NL80211_SMPS_AFTER_LAST,
-	NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_radar_event - type of radar event for DFS operation
- *
- * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
- * about detected radars or success of the channel available check (CAC)
- *
- * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
- *	now unusable.
- * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
- *	the channel is now available.
- * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
- *	change to the channel status.
- * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
- *	over, channel becomes usable.
- * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
- *	non-operating channel is expired and no longer valid. New CAC must
- *	be done on this channel before starting the operation. This is not
- *	applicable for ETSI dfs domain where pre-CAC is valid for ever.
- * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
- *	should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
- */
-enum nl80211_radar_event {
-	NL80211_RADAR_DETECTED,
-	NL80211_RADAR_CAC_FINISHED,
-	NL80211_RADAR_CAC_ABORTED,
-	NL80211_RADAR_NOP_FINISHED,
-	NL80211_RADAR_PRE_CAC_EXPIRED,
-	NL80211_RADAR_CAC_STARTED,
-};
-
-/**
- * enum nl80211_dfs_state - DFS states for channels
- *
- * Channel states used by the DFS code.
- *
- * @NL80211_DFS_USABLE: The channel can be used, but channel availability
- *	check (CAC) must be performed before using it for AP or IBSS.
- * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
- *	is therefore marked as not available.
- * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
- */
-enum nl80211_dfs_state {
-	NL80211_DFS_USABLE,
-	NL80211_DFS_UNAVAILABLE,
-	NL80211_DFS_AVAILABLE,
-};
-
-/**
- * enum enum nl80211_protocol_features - nl80211 protocol features
- * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
- *	wiphy dumps (if requested by the application with the attribute
- *	%NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
- *	wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
- *	%NL80211_ATTR_WDEV.
- */
-enum nl80211_protocol_features {
-	NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP =	1 << 0,
-};
-
-/**
- * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers
- *
- * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified.
- * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol.
- * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol.
- * @NL80211_CRIT_PROTO_APIPA: APIPA protocol.
- * @NUM_NL80211_CRIT_PROTO: must be kept last.
- */
-enum nl80211_crit_proto_id {
-	NL80211_CRIT_PROTO_UNSPEC,
-	NL80211_CRIT_PROTO_DHCP,
-	NL80211_CRIT_PROTO_EAPOL,
-	NL80211_CRIT_PROTO_APIPA,
-	/* add other protocols before this one */
-	NUM_NL80211_CRIT_PROTO
-};
-
-/* maximum duration for critical protocol measures */
-#define NL80211_CRIT_PROTO_MAX_DURATION		5000 /* msec */
-
-/**
- * enum nl80211_rxmgmt_flags - flags for received management frame.
- *
- * Used by cfg80211_rx_mgmt()
- *
- * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
- * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
- *	the authentication. Exclusively defined for host drivers that
- *	advertises the SME functionality but would like the userspace
- *	to handle certain authentication algorithms (e.g. SAE).
- */
-enum nl80211_rxmgmt_flags {
-	NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
-//tianyan@2021.7.27 modify for add wifi6 module start
-	NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
-//tianyan@2021.7.27 modify for add wifi6 module end
-};
-
-/*
- * If this flag is unset, the lower 24 bits are an OUI, if set
- * a Linux nl80211 vendor ID is used (no such IDs are allocated
- * yet, so that's not valid so far)
- */
-#define NL80211_VENDOR_ID_IS_LINUX	0x80000000
-
-/**
- * struct nl80211_vendor_cmd_info - vendor command data
- * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
- *	value is a 24-bit OUI; if it is set then a separately allocated ID
- *	may be used, but no such IDs are allocated yet. New IDs should be
- *	added to this file when needed.
- * @subcmd: sub-command ID for the command
- */
-struct nl80211_vendor_cmd_info {
-	__u32 vendor_id;
-	__u32 subcmd;
-};
-
-/**
- * enum nl80211_tdls_peer_capability - TDLS peer flags.
- *
- * Used by tdls_mgmt() to determine which conditional elements need
- * to be added to TDLS Setup frames.
- *
- * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
- * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
- * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
- */
-enum nl80211_tdls_peer_capability {
-	NL80211_TDLS_PEER_HT = 1<<0,
-	NL80211_TDLS_PEER_VHT = 1<<1,
-	NL80211_TDLS_PEER_WMM = 1<<2,
-};
-
-/**
- * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
- * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
- *	seconds (u32).
- * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
- *	scan plan (u32). The last scan plan must not specify this attribute
- *	because it will run infinitely. A value of zero is invalid as it will
- *	make the scan plan meaningless.
- * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
- *	currently defined
- * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_plan {
-	__NL80211_SCHED_SCAN_PLAN_INVALID,
-	NL80211_SCHED_SCAN_PLAN_INTERVAL,
-	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
-
-	/* keep last */
-	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
-	NL80211_SCHED_SCAN_PLAN_MAX =
-		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
-};
-
-/**
- * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
- *
- * @band: band of BSS that must match for RSSI value adjustment. The value
- *	of this field is according to &enum nl80211_band.
- * @delta: value used to adjust the RSSI value of matching BSS in dB.
- */
-struct nl80211_bss_select_rssi_adjust {
-	__u8 band;
-	__s8 delta;
-} __attribute__((packed));
-
-/**
- * enum nl80211_bss_select_attr - attributes for bss selection.
- *
- * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
- * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
- *	is requested.
- * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
- *	selection should be done such that the specified band is preferred.
- *	When there are multiple BSS-es in the preferred band, the driver
- *	shall use RSSI-based BSS selection as a second step. The value of
- *	this attribute is according to &enum nl80211_band (u32).
- * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
- *	BSS-es in the specified band is to be adjusted before doing
- *	RSSI-based BSS selection. The attribute value is a packed structure
- *	value as specified by &struct nl80211_bss_select_rssi_adjust.
- * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
- * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
- *
- * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
- * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
- * which the driver shall use.
- */
-enum nl80211_bss_select_attr {
-	__NL80211_BSS_SELECT_ATTR_INVALID,
-	NL80211_BSS_SELECT_ATTR_RSSI,
-	NL80211_BSS_SELECT_ATTR_BAND_PREF,
-	NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
-
-	/* keep last */
-	__NL80211_BSS_SELECT_ATTR_AFTER_LAST,
-	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_nan_function_type - NAN function type
- *
- * Defines the function type of a NAN function
- *
- * @NL80211_NAN_FUNC_PUBLISH: function is publish
- * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
- * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
- */
-enum nl80211_nan_function_type {
-	NL80211_NAN_FUNC_PUBLISH,
-	NL80211_NAN_FUNC_SUBSCRIBE,
-	NL80211_NAN_FUNC_FOLLOW_UP,
-
-	/* keep last */
-	__NL80211_NAN_FUNC_TYPE_AFTER_LAST,
-	NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
-};
-
-/**
- * enum nl80211_nan_publish_type - NAN publish tx type
- *
- * Defines how to send publish Service Discovery Frames
- *
- * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
- * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
- */
-enum nl80211_nan_publish_type {
-	NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
-	NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
-};
-
-/**
- * enum nl80211_nan_func_term_reason - NAN functions termination reason
- *
- * Defines termination reasons of a NAN function
- *
- * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
- * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
- * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
- */
-enum nl80211_nan_func_term_reason {
-	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
-	NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
-	NL80211_NAN_FUNC_TERM_REASON_ERROR,
-};
-
-#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
-#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
-#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
-
-/**
- * enum nl80211_nan_func_attributes - NAN function attributes
- * @__NL80211_NAN_FUNC_INVALID: invalid
- * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
- * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
- *	specified in NAN spec. This is a binary attribute.
- * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
- *	publish. Defines the transmission type for the publish Service Discovery
- *	Frame, see &enum nl80211_nan_publish_type. Its type is u8.
- * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
- *	publish. Should the solicited publish Service Discovery Frame be sent to
- *	the NAN Broadcast address. This is a flag.
- * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
- *	subscribe. Is the subscribe active. This is a flag.
- * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
- *	The instance ID for the follow up Service Discovery Frame. This is u8.
- * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
- *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
- * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
- *	follow up Service Discovery Frame. This is a binary attribute.
- * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
- *	close range. The range itself (RSSI) is defined by the device.
- *	This is a flag.
- * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
- *	stay active. If not present infinite TTL is assumed. This is a u32.
- * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
- *	specific info. This is a binary attribute.
- * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
- *	See &enum nl80211_nan_srf_attributes.
- * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
- *	attribute. It is a list of binary values.
- * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
- *	nested attribute. It is a list of binary values.
- * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
- *	Its type is u8 and it cannot be 0.
- * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
- *	See &enum nl80211_nan_func_term_reason.
- *
- * @NUM_NL80211_NAN_FUNC_ATTR: internal
- * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
- */
-enum nl80211_nan_func_attributes {
-	__NL80211_NAN_FUNC_INVALID,
-	NL80211_NAN_FUNC_TYPE,
-	NL80211_NAN_FUNC_SERVICE_ID,
-	NL80211_NAN_FUNC_PUBLISH_TYPE,
-	NL80211_NAN_FUNC_PUBLISH_BCAST,
-	NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
-	NL80211_NAN_FUNC_FOLLOW_UP_ID,
-	NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
-	NL80211_NAN_FUNC_FOLLOW_UP_DEST,
-	NL80211_NAN_FUNC_CLOSE_RANGE,
-	NL80211_NAN_FUNC_TTL,
-	NL80211_NAN_FUNC_SERVICE_INFO,
-	NL80211_NAN_FUNC_SRF,
-	NL80211_NAN_FUNC_RX_MATCH_FILTER,
-	NL80211_NAN_FUNC_TX_MATCH_FILTER,
-	NL80211_NAN_FUNC_INSTANCE_ID,
-	NL80211_NAN_FUNC_TERM_REASON,
-
-	/* keep last */
-	NUM_NL80211_NAN_FUNC_ATTR,
-	NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
-};
-
-/**
- * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
- * @__NL80211_NAN_SRF_INVALID: invalid
- * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
- *	This is a flag.
- * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
- *	%NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
- * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
- *	%NL80211_NAN_SRF_BF is present. This is a u8.
- * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
- *	and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
- *	attribute. Each nested attribute is a MAC address.
- * @NUM_NL80211_NAN_SRF_ATTR: internal
- * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
- */
-enum nl80211_nan_srf_attributes {
-	__NL80211_NAN_SRF_INVALID,
-	NL80211_NAN_SRF_INCLUDE,
-	NL80211_NAN_SRF_BF,
-	NL80211_NAN_SRF_BF_IDX,
-	NL80211_NAN_SRF_MAC_ADDRS,
-
-	/* keep last */
-	NUM_NL80211_NAN_SRF_ATTR,
-	NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
-};
-
-/**
- * enum nl80211_nan_match_attributes - NAN match attributes
- * @__NL80211_NAN_MATCH_INVALID: invalid
- * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
- *	match. This is a nested attribute.
- *	See &enum nl80211_nan_func_attributes.
- * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
- *	that caused the match. This is a nested attribute.
- *	See &enum nl80211_nan_func_attributes.
- *
- * @NUM_NL80211_NAN_MATCH_ATTR: internal
- * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
- */
-enum nl80211_nan_match_attributes {
-	__NL80211_NAN_MATCH_INVALID,
-	NL80211_NAN_MATCH_FUNC_LOCAL,
-	NL80211_NAN_MATCH_FUNC_PEER,
-
-	/* keep last */
-	NUM_NL80211_NAN_MATCH_ATTR,
-	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
-};
-
-/**
- * nl80211_external_auth_action - Action to perform with external
- *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
- * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
- * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
- */
-enum nl80211_external_auth_action {
-	NL80211_EXTERNAL_AUTH_START,
-	NL80211_EXTERNAL_AUTH_ABORT,
-};
-
-#endif /* __LINUX_NL80211_H */
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11ax.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11ax.h
old mode 100755
new mode 100644
index 1566a1b..24fe183
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11ax.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11ax.h
@@ -2,9 +2,9 @@
  * Basic types and constants relating to 802.11ax/HE STA
  * This is a portion of 802.11ax definition. The rest are in 802.11.h.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11e.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11e.h
index 65fb149..fc6bc80 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11e.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11e.h
@@ -1,9 +1,9 @@
 /*
  * 802.11e protocol header file
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11s.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11s.h
index fb55aa0..384fbe6 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11s.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.11s.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental types and constants relating to 802.11s Mesh
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.1d.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.1d.h
index 5ef8935..7fdaae9 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.1d.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.1d.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental types and constants relating to 802.1D
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.3.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.3.h
index 769e33a..b3b5edc 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.3.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/802.3.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to 802.3
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/aidmp.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/aidmp.h
index 59436e7..e915c5c 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/aidmp.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/aidmp.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom AMBA Interconnect definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_cfg.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_cfg.h
index f070d89..110accc 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_cfg.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_cfg.h
@@ -1,9 +1,9 @@
 /*
  * BCM common config options
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_mpool_pub.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_mpool_pub.h
index 78219d7..81a370c 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_mpool_pub.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_mpool_pub.h
@@ -35,9 +35,9 @@
  *              and instrumentation on top of the heap, without modifying the heap
  *              allocation implementation.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_ring.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_ring.h
index 644d588..63e41f4 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_ring.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcm_ring.h
@@ -6,9 +6,9 @@
  *
  * NOTE: A ring of size N, may only hold N-1 elements.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -103,9 +103,9 @@
  * private L1 data cache.
  * +----------------------------------------------------------------------------
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmarp.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmarp.h
index 0ba1099..df28421 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmarp.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmarp.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to ARP Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmbloom.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmbloom.h
index ccf9b9c..263657f 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmbloom.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmbloom.h
@@ -1,9 +1,9 @@
 /*
  * Bloom filter support
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmcdc.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmcdc.h
index e53a236..c4c0bd8 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmcdc.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmcdc.h
@@ -4,9 +4,9 @@
  *
  * Definitions subject to change without notice.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdefs.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdefs.h
index 99e3f83..014c7ce 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdefs.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdefs.h
@@ -1,9 +1,9 @@
 /*
  * Misc system wide definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdhcp.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdhcp.h
index 04f0abb..e4f1d20 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdhcp.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmdhcp.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to DHCP Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmendian.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmendian.h
index 5d145f9..091ba18 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmendian.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmendian.h
@@ -1,9 +1,9 @@
 /*
  * Byte order utilities
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmeth.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmeth.h
index 5a8c70d..bf833e9 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmeth.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmeth.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom Ethernettype  protocol definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmicmp.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmicmp.h
index 007ba14..807bf37 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmicmp.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmicmp.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to ICMP Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmiov.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmiov.h
index e0290f2..5bd754e 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmiov.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmiov.h
@@ -4,9 +4,9 @@
  * To be used in firmware and host apps or dhd - reducing code size,
  * duplication, and maintenance overhead.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmip.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmip.h
index 6ed708a..ee0abe6 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmip.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmip.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to IP Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmipv6.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmipv6.h
index 245cf5f..db87441 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmipv6.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmipv6.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to Neighbor Discovery Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmmsgbuf.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmmsgbuf.h
index cf6707e..6ebe60c 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmmsgbuf.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmmsgbuf.h
@@ -4,9 +4,9 @@
  *
  * Definitions subject to change without notice.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmnvram.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmnvram.h
index 9f37464..dd410b6 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmnvram.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmnvram.h
@@ -1,9 +1,9 @@
 /*
  * NVRAM variable manipulation
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcie.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcie.h
index bd7eb5a..5d16fed 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcie.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcie.h
@@ -3,9 +3,9 @@
  * Software-specific definitions shared between device and host side
  * Explains the shared area between host and dongle
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcispi.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcispi.h
index 1662bf1..2b5a2bb 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcispi.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmpcispi.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom PCI-SPI Host Controller Register Definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmperf.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmperf.h
index f7f4d94..55cfd34 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmperf.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmperf.h
@@ -1,9 +1,9 @@
 /*
  * Performance counters software interface.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdbus.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdbus.h
index f1f46d4..bded9f7 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdbus.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdbus.h
@@ -2,9 +2,9 @@
  * Definitions for API from sdio common code (bcmsdh) to individual
  * host controller drivers.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdh_sdmmc.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdh_sdmmc.h
index 17c119f..26c5bd2 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdh_sdmmc.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdh_sdmmc.h
@@ -1,9 +1,9 @@
 /*
  * BCMSDH Function Driver for the native SDIO/MMC driver in the Linux Kernel
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdpcm.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdpcm.h
old mode 100755
new mode 100644
index 6d18f53..37d968b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdpcm.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdpcm.h
@@ -2,9 +2,9 @@
  * Broadcom SDIO/PCMCIA
  * Software-specific definitions shared between device and host side
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdspi.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdspi.h
old mode 100755
new mode 100644
index 8860bc6..52883dd
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdspi.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdspi.h
@@ -1,9 +1,9 @@
 /*
  * SD-SPI Protocol Conversion - BCMSDH->SPI Translation Layer
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdstd.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdstd.h
old mode 100755
new mode 100644
index 2f07291..7485343
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdstd.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsdstd.h
@@ -1,9 +1,9 @@
 /*
  *  'Standard' SDIO HOST CONTROLLER driver
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspi.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspi.h
old mode 100755
new mode 100644
index 22f78b2..5146a7f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspi.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspi.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom SPI Low-Level Hardware Driver API
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspibrcm.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspibrcm.h
old mode 100755
new mode 100644
index afb157b..74b9abc
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspibrcm.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmspibrcm.h
@@ -1,9 +1,9 @@
 /*
  * SD-SPI Protocol Conversion - BCMSDH->gSPI Translation Layer
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_fmt.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_fmt.h
old mode 100755
new mode 100644
index a8bc9d2..e6d90cd
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_fmt.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_fmt.h
@@ -1,9 +1,9 @@
 /*
  * SROM format definition.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_tbl.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_tbl.h
old mode 100755
new mode 100644
index 59a9d52..e42663b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_tbl.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmsrom_tbl.h
@@ -1,9 +1,9 @@
 /*
  * Table that encodes the srom formats for PCI/PCIe NICs.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmstdlib_s.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmstdlib_s.h
old mode 100755
new mode 100644
index a235bd5..582612e
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmstdlib_s.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmstdlib_s.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom Secure Standard Library.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtcp.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtcp.h
old mode 100755
new mode 100644
index 2890dfc..610f878
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtcp.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtcp.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to TCP Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtlv.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtlv.h
old mode 100755
new mode 100644
index 979324b..83d4c91
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtlv.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmtlv.h
@@ -1,9 +1,9 @@
 /*
  * TLV and XTLV support
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmudp.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmudp.h
old mode 100755
new mode 100644
index 0f61b81..5c4a10c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmudp.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmudp.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental constants relating to UDP Protocol
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmutils.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmutils.h
old mode 100755
new mode 100644
index 69110f3..cacf4fd
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmutils.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/bcmutils.h
@@ -1,9 +1,9 @@
 /*
  * Misc useful os-independent macros and functions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dbus.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dbus.h
old mode 100755
new mode 100644
index ff8be44..3b6a7c2
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dbus.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dbus.h
@@ -2,9 +2,9 @@
  * Dongle BUS interface Abstraction layer
  *   target serial buses like USB, SDIO, SPI, etc.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhd_daemon.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhd_daemon.h
old mode 100755
new mode 100644
index 06f062e..90ad408
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhd_daemon.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhd_daemon.h
@@ -1,9 +1,9 @@
 /*
  * Header file for DHD daemon to handle timeouts
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhdioctl.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhdioctl.h
old mode 100755
new mode 100644
index cdcbdb1..6b0582a
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhdioctl.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dhdioctl.h
@@ -5,9 +5,9 @@
  *
  * Definitions subject to change without notice.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dnglevent.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dnglevent.h
old mode 100755
new mode 100644
index a554dea..46defe2
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dnglevent.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/dnglevent.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom Event  protocol definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/eapol.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/eapol.h
old mode 100755
new mode 100644
index 74dd9ee..440a7fa
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/eapol.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/eapol.h
@@ -5,9 +5,9 @@
  * IEEE Std 802.1X-2001
  * IEEE 802.1X RADIUS Usage Guidelines
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/epivers.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/epivers.h
index 651b4cb..46c98b9 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/epivers.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/epivers.h
@@ -15,26 +15,26 @@
 
 #define	EPI_MINOR_VERSION	10
 
-#define	EPI_RC_NUMBER		96
+#define	EPI_RC_NUMBER		80
 
 #define	EPI_INCREMENTAL_NUMBER	0
 
 #define	EPI_BUILD_NUMBER	0
 
-#define	EPI_VERSION		100, 10, 96, 0
+#define	EPI_VERSION		100, 10, 80, 0
 
-#define	EPI_VERSION_NUM		0x640a6000
+#define	EPI_VERSION_NUM		0x640a5000
 
-#define EPI_VERSION_DEV		100.10.96
+#define EPI_VERSION_DEV		100.10.80
 
 /* Driver Version String, ASCII, 32 chars max */
 #ifdef BCMINTERNAL
-#define	EPI_VERSION_STR		"100.10.96 (8c0aa58 BCMINT)"
+#define	EPI_VERSION_STR		"100.10.80 (b285849 BCMINT)"
 #else
 #ifdef WLTEST
-#define	EPI_VERSION_STR		"100.10.96 (8c0aa58 WLTEST)"
+#define	EPI_VERSION_STR		"100.10.80 (b285849 WLTEST)"
 #else
-#define	EPI_VERSION_STR		"100.10.96 (8c0aa58)"
+#define	EPI_VERSION_STR		"100.10.80 (b285849)"
 #endif
 #endif /* BCMINTERNAL */
 
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/etd.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/etd.h
old mode 100755
new mode 100644
index c36034f..daa69bc
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/etd.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/etd.h
@@ -1,9 +1,9 @@
 /*
  * Extended Trap data component interface file.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/ethernet.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/ethernet.h
old mode 100755
new mode 100644
index 078047b..6408ffb
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/ethernet.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/ethernet.h
@@ -1,9 +1,9 @@
 /*
  * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log.h
old mode 100755
new mode 100644
index 2a0af2d..b1aee3a
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log.h
@@ -1,9 +1,9 @@
 /*
  * EVENT_LOG system definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_payload.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_payload.h
old mode 100755
new mode 100644
index ddcdcc4..a33064f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_payload.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_payload.h
@@ -4,9 +4,9 @@
  * This file describes the payloads of event log entries that are data buffers
  * rather than formatted string entries. The contents are generally XTLVs.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_set.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_set.h
old mode 100755
new mode 100644
index 7a23a0e..7541a81
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_set.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_set.h
@@ -1,9 +1,9 @@
 /*
  * EVENT_LOG system definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_tag.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_tag.h
old mode 100755
new mode 100644
index 6de9b94..0e33635
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_tag.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_log_tag.h
@@ -1,9 +1,9 @@
 /*
  * EVENT_LOG system definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_trace.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_trace.h
old mode 100755
new mode 100644
index 0c665da..3495ecb
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_trace.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/event_trace.h
@@ -1,9 +1,9 @@
 /*
  * Trace log blocks sent over HBUS
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/fils.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/fils.h
old mode 100755
new mode 100644
index 40a7cb6..c5cf876
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/fils.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/fils.h
@@ -1,8 +1,8 @@
 /*
  * Fundamental types and constants relating to FILS AUTHENTICATION
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_armtrap.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_armtrap.h
old mode 100755
new mode 100644
index 7d6c5da..ac61c90
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_armtrap.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_armtrap.h
@@ -1,9 +1,9 @@
 /*
  * HND arm trap handling.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_cons.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_cons.h
old mode 100755
new mode 100644
index f6825e8..94af2fe
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_cons.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_cons.h
@@ -1,9 +1,9 @@
 /*
  * Console support for RTE - for host use only.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_debug.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_debug.h
old mode 100755
new mode 100644
index 7b723de..d21715f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_debug.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_debug.h
@@ -1,9 +1,9 @@
 /*
  * HND Run Time Environment debug info area
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktpool.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktpool.h
old mode 100755
new mode 100644
index a79f9bb..a437230
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktpool.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktpool.h
@@ -1,9 +1,9 @@
 /*
  * HND generic packet pool operation primitives
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktq.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktq.h
old mode 100755
new mode 100644
index 47911b6..88fab42
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktq.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_pktq.h
@@ -1,9 +1,9 @@
 /*
  * HND generic pktq operation primitives
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_trap.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_trap.h
old mode 100755
new mode 100644
index 7ecf449..5482654
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_trap.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hnd_trap.h
@@ -1,9 +1,9 @@
 /*
  * HND Trap handling.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndchipc.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndchipc.h
old mode 100755
new mode 100644
index a0ecc7b..e12545a
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndchipc.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndchipc.h
@@ -1,9 +1,9 @@
 /*
  * HND SiliconBackplane chipcommon support - OS independent.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndlhl.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndlhl.h
old mode 100755
new mode 100644
index e0af659..f7f4611
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndlhl.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndlhl.h
@@ -1,9 +1,9 @@
 /*
  * HND SiliconBackplane PMU support.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndmem.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndmem.h
old mode 100755
new mode 100644
index fd4a174..8b40e91
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndmem.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndmem.h
@@ -1,9 +1,9 @@
 /*
  * Utility routines for configuring different memories in Broadcom chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndoobr.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndoobr.h
old mode 100755
new mode 100644
index d6de88a..f277e5c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndoobr.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndoobr.h
@@ -1,9 +1,9 @@
 /*
  * HND OOBR interface header
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndpmu.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndpmu.h
old mode 100755
new mode 100644
index 9e25aff..d2e11b1
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndpmu.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndpmu.h
@@ -1,9 +1,9 @@
 /*
  * HND SiliconBackplane PMU support.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndsoc.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndsoc.h
old mode 100755
new mode 100644
index bf4a503..c3942a8
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndsoc.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/hndsoc.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom HND chip & on-chip-interconnect-related definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/linux_pkt.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/linux_pkt.h
old mode 100755
new mode 100644
index ad3f9ac..1292b1a
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/linux_pkt.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/linux_pkt.h
@@ -1,9 +1,9 @@
 /*
  * Linux Packet (skb) interface
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/lpflags.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/lpflags.h
old mode 100755
new mode 100644
index 9ef3362..6f56f97
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/lpflags.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/lpflags.h
@@ -1,9 +1,9 @@
 /*
  * Chip related low power flags
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/mbo.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/mbo.h
old mode 100755
new mode 100644
index 2b9ddbc..a52198b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/mbo.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/mbo.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental types and constants relating to WFA MBO
  * (Multiband Operation)
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/miniopt.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/miniopt.h
old mode 100755
new mode 100644
index 0efa45f..2db807b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/miniopt.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/miniopt.h
@@ -1,9 +1,9 @@
 /*
  * Command line options parser.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msf.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msf.h
old mode 100755
new mode 100644
index 1ec021b..9491806
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msf.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msf.h
@@ -1,9 +1,9 @@
 /*
  * Common interface to MSF (multi-segment format) definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msgtrace.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msgtrace.h
old mode 100755
new mode 100644
index 82b03ca..1d1cfe0
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msgtrace.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/msgtrace.h
@@ -1,9 +1,9 @@
 /*
  * Trace messages sent over HBUS
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/nan.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/nan.h
old mode 100755
new mode 100644
index 01f2b48..7c37f6d
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/nan.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/nan.h
@@ -2,9 +2,9 @@
  * Fundamental types and constants relating to WFA NAN
  * (Neighbor Awareness Networking)
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl.h
old mode 100755
new mode 100644
index a6dc799..0d8c4a3
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl.h
@@ -1,9 +1,9 @@
 /*
  * OS Abstraction Layer
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_decl.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_decl.h
old mode 100755
new mode 100644
index 5ca76a7..a36c7c4
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_decl.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_decl.h
@@ -1,9 +1,9 @@
 /*
  * osl forward declarations
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_ext.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_ext.h
old mode 100755
new mode 100644
index 490356e..97fa174
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_ext.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/osl_ext.h
@@ -2,9 +2,9 @@
  * OS Abstraction Layer Extension - the APIs defined by the "extension" API
  * are only supported by a subset of all operating systems.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/p2p.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/p2p.h
old mode 100755
new mode 100644
index 0365d54..9e1d9a8
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/p2p.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/p2p.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental types and constants relating to WFA P2P (aka WiFi Direct)
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_end.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_end.h
old mode 100755
new mode 100644
index 70518fd..c1654c8
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_end.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_end.h
@@ -15,9 +15,9 @@
  * #include <packed_section_end.h>
  *
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_start.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_start.h
old mode 100755
new mode 100644
index 536e8ed..56b21fd
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_start.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/packed_section_start.h
@@ -15,9 +15,9 @@
  * #include <packed_section_end.h>
  *
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcicfg.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcicfg.h
old mode 100755
new mode 100644
index 168b375..03d53f0
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcicfg.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcicfg.h
@@ -1,9 +1,9 @@
 /*
  * pcicfg.h: PCI configuration constants and structures.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcie_core.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcie_core.h
old mode 100755
new mode 100644
index de72080..4a6ff73
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcie_core.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/pcie_core.h
@@ -1,9 +1,9 @@
 /*
  * BCM43XX PCIE core hardware definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/rte_ioctl.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/rte_ioctl.h
old mode 100755
new mode 100644
index a4874f5..76e24e7
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/rte_ioctl.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/rte_ioctl.h
@@ -1,9 +1,9 @@
 /*
  * HND Run Time Environment ioctl.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbchipc.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbchipc.h
old mode 100755
new mode 100644
index 531f393..731ef6c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbchipc.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbchipc.h
@@ -7,9 +7,9 @@
  *
  * $Id: sbchipc.h 701163 2017-05-23 22:21:03Z $
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbconfig.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbconfig.h
old mode 100755
new mode 100644
index 71b8711..285084b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbconfig.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbconfig.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom SiliconBackplane hardware register definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbgci.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbgci.h
old mode 100755
new mode 100644
index 17ae67e..cd27717
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbgci.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbgci.h
@@ -1,9 +1,9 @@
 /*
  * SiliconBackplane GCI core hardware definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbhndarm.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbhndarm.h
old mode 100755
new mode 100644
index 6bc8cd7..7f8787f
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbhndarm.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbhndarm.h
@@ -1,9 +1,9 @@
 /*
  * Broadcom SiliconBackplane ARM definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbpcmcia.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbpcmcia.h
old mode 100755
new mode 100644
index 7b39833..c194719
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbpcmcia.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbpcmcia.h
@@ -1,9 +1,9 @@
 /*
  * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsdio.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsdio.h
old mode 100755
new mode 100644
index d8870a0..19f921c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsdio.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsdio.h
@@ -4,9 +4,9 @@
  *
  * SDIO core support 1bit, 4 bit SDIO mode as well as SPI mode.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsocram.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsocram.h
old mode 100755
new mode 100644
index 3b6f088..75587be
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsocram.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsocram.h
@@ -1,9 +1,9 @@
 /*
  * BCM47XX Sonics SiliconBackplane embedded ram core
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsysmem.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsysmem.h
old mode 100755
new mode 100644
index d05649d..d41d87d
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsysmem.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sbsysmem.h
@@ -1,9 +1,9 @@
 /*
  * SiliconBackplane System Memory core
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdio.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdio.h
index e6c5c17..a0d95d5 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdio.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdio.h
@@ -2,9 +2,9 @@
  * SDIO spec header file
  * Protocol and standard (common) device definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdioh.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdioh.h
old mode 100755
new mode 100644
index db64440..6ab58ab
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdioh.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdioh.h
@@ -2,9 +2,9 @@
  * SDIO Host Controller Spec header file
  * Register map and definitions for the Standard Host Controller
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdiovar.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdiovar.h
old mode 100755
new mode 100644
index 9894791..b580264
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdiovar.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdiovar.h
@@ -2,9 +2,9 @@
  * Structure used by apps whose drivers access SDIO drivers.
  * Pulled out separately so dhdu and wlu can both use it.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdspi.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdspi.h
old mode 100755
new mode 100644
index 2e3a719..291fd54
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdspi.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/sdspi.h
@@ -1,9 +1,9 @@
 /*
  * SD-SPI Protocol Standard
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/siutils.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/siutils.h
old mode 100755
new mode 100644
index fba4e73..03b2ab8
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/siutils.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/siutils.h
@@ -2,9 +2,9 @@
  * Misc utility routines for accessing the SOC Interconnects
  * of Broadcom HNBU chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/spid.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/spid.h
old mode 100755
new mode 100644
index 4a6ee31..9426078
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/spid.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/spid.h
@@ -1,9 +1,9 @@
 /*
  * SPI device spec header file
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/trxhdr.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/trxhdr.h
old mode 100755
new mode 100644
index 85b2247..41f1166
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/trxhdr.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/trxhdr.h
@@ -1,9 +1,9 @@
 /*
  * TRX image file header format.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/vlan.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/vlan.h
old mode 100755
new mode 100644
index 6e0a2d4..5c5ebdf
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/vlan.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/vlan.h
@@ -1,9 +1,9 @@
 /*
  * 802.1Q VLAN protocol definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wl_iw.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wl_iw.h
old mode 100755
new mode 100644
index 511a217..bfb9955
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wl_iw.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wl_iw.h
@@ -1,9 +1,9 @@
 /*
  * Linux Wireless Extensions support
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlfc_proto.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlfc_proto.h
old mode 100755
new mode 100644
index d46faa0..1e91e74
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlfc_proto.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlfc_proto.h
@@ -1,7 +1,7 @@
 /*
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlioctl_utils.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlioctl_utils.h
old mode 100755
new mode 100644
index 0b3d272..f8d5155
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlioctl_utils.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wlioctl_utils.h
@@ -1,9 +1,9 @@
 /*
  * Custom OID/ioctl related helper functions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wpa.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wpa.h
index d823dbf..c6f4619 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wpa.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wpa.h
@@ -1,9 +1,9 @@
 /*
  * Fundamental types and constants relating to WPA
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wps.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wps.h
old mode 100755
new mode 100644
index 3cfd277..d5f2e4c
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wps.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/include/wps.h
@@ -1,9 +1,9 @@
 /*
  * WPS IE definitions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl.c
index 43cfeaa..d7d0c79 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl.c
@@ -1,9 +1,9 @@
 /*
  * Linux OS Independent Layer
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl_priv.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl_priv.h
old mode 100755
new mode 100644
index 61d3a4e..ca71d66
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl_priv.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_osl_priv.h
@@ -1,9 +1,9 @@
 /*
  * Private header file for Linux OS Independent Layer
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_pkt.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_pkt.c
old mode 100755
new mode 100644
index 83d8654..b42dac9
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_pkt.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/linux_pkt.c
@@ -1,9 +1,9 @@
 /*
  * Linux Packet (skb) interface
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/otpdefs.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/otpdefs.h
old mode 100755
new mode 100644
index 6bd45c6..dff03f9
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/otpdefs.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/otpdefs.h
@@ -1,9 +1,9 @@
 /*
  * otpdefs.h SROM/OTP definitions.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright 2016 Broadcom
+ * Copyright 2021 Broadcom
  *
  * This program is the proprietary software of Broadcom and/or
  * its licensors, and may only be used, duplicated, modified or distributed
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/pcie_core.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/pcie_core.c
old mode 100755
new mode 100644
index 8a03251..6fb018a
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/pcie_core.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/pcie_core.c
@@ -3,9 +3,9 @@
  * Contains PCIe related functions that are shared between different driver models (e.g. firmware
  * builds, DHD builds, BMAC builds), in order to avoid code duplication.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/sbutils.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/sbutils.c
old mode 100755
new mode 100644
index 42853fe..55c7aad
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/sbutils.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/sbutils.c
@@ -2,9 +2,9 @@
  * Misc utility routines for accessing chip-specific features
  * of the SiliconBackplane-based Broadcom chips.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/siutils_priv.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/siutils_priv.h
old mode 100755
new mode 100644
index 27a30fa..e42df98
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/siutils_priv.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/siutils_priv.h
@@ -1,9 +1,9 @@
 /*
  * Include file private to the SOC Interconnect support files.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_android.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_android.h
old mode 100755
new mode 100644
index 0542c5b..4b43ad5
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_android.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_android.h
@@ -1,9 +1,9 @@
 /*
  * Linux cfg80211 driver - Android related functions
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.c
index 18bfe8b..19021bf 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.c
@@ -10909,14 +10909,6 @@
 	chspec = wf_channel2chspec(_chan, bw);
 
 	if (wf_chspec_valid(chspec)) {
-		if (IS_RADAR_CHAN(chan->flags)) {
-			WL_ERR(("enable radar  center_freq:%d, chan->flags:0x%x, dfs_state:%d \n", chan->center_freq,  chan->flags, chan->dfs_state));
-			err = wldev_iovar_setint(dev, "radar", 1);
-		}
-		else {
-			WL_ERR(("disable radar center_freq:%d, chan->flags:0x%x, dfs_state:%d \n", chan->center_freq,  chan->flags, chan->dfs_state));
-			err = wldev_iovar_setint(dev, "radar", 0);
-		}
 		fw_chspec = wl_chspec_host_to_driver(chspec);
 		if (fw_chspec != INVCHANSPEC) {
 			if ((err = wldev_iovar_setint(dev, "chanspec",
@@ -13093,13 +13085,17 @@
 	}
 
 	/* Configure hidden SSID */
-//wifi hide ssid&unhide ssid add by qs.xiong 20221102 start
-    if((err = wldev_iovar_setint(dev, "closednet", (info->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE))) < 0 )
-    {
-        WL_ERR(("failed to set hidden : %d,hidden_ssid_enum_val: %d\n", err,info->hidden_ssid));
-    }
-    WL_DBG(("hidden_ssid_enum_val: %d \n", info->hidden_ssid));
-//wifi hide ssid&unhide ssid add by qs.xiong 20221102 end
+	if (info->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE) {
+		if ((err = wldev_iovar_setint(dev, "closednet", 1)) < 0)
+			WL_ERR(("failed to set hidden : %d\n", err));
+		WL_DBG(("hidden_ssid_enum_val: %d \n", info->hidden_ssid));
+//add by qs.xiong 20221102 to fix ap unhidden fail
+	}else{
+		if ((err = wldev_iovar_setint(dev, "closednet",0 )) < 0)
+			WL_ERR(("failed to set hidden 0 : %d\n", err));
+	}
+//add by qs.xiong 20221102 to fix ap unhidden fail
+
 #ifdef SUPPORT_AP_RADIO_PWRSAVE
 	if (dev_role == NL80211_IFTYPE_AP) {
 		if (!wl_set_ap_rps(dev, FALSE, dev->name)) {
@@ -21277,8 +21273,6 @@
 		cfg->wdev->wiphy->features |= NL80211_FEATURE_FW_4WAY_HANDSHAKE;
 	}
 #endif /* BCMSUP_4WAY_HANDSHAKE */
-       /* Set the flag of DFS offload to the driver */
-	wiphy_ext_feature_set(cfg->wdev->wiphy, NL80211_EXT_FEATURE_DFS_OFFLOAD);
 	err = __wl_cfg80211_up(cfg);
 	if (unlikely(err))
 		WL_ERR(("__wl_cfg80211_up failed\n"));
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.h
index e5d0bf3..d1e400b 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg80211.h
@@ -100,12 +100,6 @@
 #define IS_AKM_OWE(akm) FALSE
 #endif // endif
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0))
-#define IS_RADAR_CHAN(flags) (flags & (IEEE80211_CHAN_RADAR | IEEE80211_CHAN_PASSIVE_SCAN))
-#else
-#define IS_RADAR_CHAN(flags) (flags & (IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR))
-#endif // endif
-
 #define htod32(i) (i)
 #define htod16(i) (i)
 #define dtoh64(i) (i)
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg_btcoex.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg_btcoex.c
old mode 100755
new mode 100644
index 46d7bef..d364b6b
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg_btcoex.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfg_btcoex.c
@@ -1,9 +1,9 @@
 /*
  * Linux cfg80211 driver - Dongle Host Driver (DHD) related
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgp2p.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgp2p.h
old mode 100755
new mode 100644
index 9b45d0e..95be464
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgp2p.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgp2p.h
@@ -1,9 +1,9 @@
 /*
  * Linux cfgp2p driver
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.c
index e6e03d4..866e843 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.c
@@ -937,6 +937,11 @@
 }
 #endif /* WL_SCAN_TYPE */
 
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0))
+#define IS_RADAR_CHAN(flags) (flags & (IEEE80211_CHAN_RADAR | IEEE80211_CHAN_PASSIVE_SCAN))
+#else
+#define IS_RADAR_CHAN(flags) (flags & (IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IR))
+#endif // endif
 static void
 wl_cfgscan_populate_scan_channels(struct bcm_cfg80211 *cfg, u16 *channel_list,
 	struct cfg80211_scan_request *request, u32 *num_channels)
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.h
old mode 100755
new mode 100644
index 8694a6e..2e29cf1
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgscan.h
@@ -1,9 +1,9 @@
 /*
  * Header for Linux cfg80211 scan
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgvendor.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgvendor.c
index 26f697d..c905a3d 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgvendor.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_cfgvendor.c
@@ -9204,6 +9204,7 @@
 	[IFX_VENDOR_ATTR_TWT_PARAM_MAX] = {.type = NLA_U8},
 };
 
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5, 3, 0))
 const struct nla_policy ifx_vendor_attr_twt_policy[IFX_VENDOR_ATTR_TWT_MAX + 1] = {
 	[IFX_VENDOR_ATTR_TWT_UNSPEC] = {.type = NLA_U8},
 	[IFX_VENDOR_ATTR_TWT_OPER] = {.type = NLA_U8},
@@ -9211,6 +9212,8 @@
 		NLA_POLICY_NESTED(ifx_vendor_attr_twt_param_policy),
 	[IFX_VENDOR_ATTR_TWT_MAX] = {.type = NLA_U8},
 };
+#endif
+
 #endif /* WL11AX */
 
 const struct nla_policy ifx_vendor_attr_policy[IFX_VENDOR_ATTR_MAX + 1] = {
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_dbg.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_dbg.h
old mode 100755
new mode 100644
index 3e61e82..56fa7ad
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_dbg.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_dbg.h
@@ -2,9 +2,9 @@
  * Minimal debug/trace/assert driver definitions for
  * Broadcom 802.11 Networking Adapter.
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_iw.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_iw.c
index cd5e759..c16478f 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_iw.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_iw.c
@@ -1,9 +1,9 @@
 /*
  * Linux Wireless Extensions support
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_linux_mon.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_linux_mon.c
old mode 100755
new mode 100644
index 13d1a86..643bfe4
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_linux_mon.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_linux_mon.c
@@ -1,9 +1,9 @@
 /*
  * Broadcom Dongle Host Driver (DHD), Linux monitor network interface
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_roam.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_roam.c
index 5a95976..e3be4aa 100755
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_roam.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wl_roam.c
@@ -1,9 +1,9 @@
 /*
  * Linux roam cache
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2022 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.c b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.c
old mode 100755
new mode 100644
index 8722def..f25adf1
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.c
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.c
@@ -1,9 +1,9 @@
 /*
  * Common function shared by Linux WEXT, cfg80211 and p2p drivers
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
diff --git a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.h b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.h
old mode 100755
new mode 100644
index 7e7899f..98996fc
--- a/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.h
+++ b/src/kernel/linux/v4.19/drivers/net/wireless/bcmdhd/wldev_common.h
@@ -1,9 +1,9 @@
 /*
  * Common function shared by Linux WEXT, cfg80211 and p2p drivers
  *
- * Portions of this code are copyright (c) 2023 Cypress Semiconductor Corporation
+ * Portions of this code are copyright (c) 2021 Cypress Semiconductor Corporation
  *
- * Copyright (C) 1999-2016, Broadcom Corporation
+ * Copyright (C) 1999-2017, Broadcom Corporation
  *
  *      Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you