|  | /* linux/drivers/char/pc8736x_gpio.c | 
|  |  | 
|  | National Semiconductor PC8736x GPIO driver.  Allows a user space | 
|  | process to play with the GPIO pins. | 
|  |  | 
|  | Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com> | 
|  |  | 
|  | adapted from linux/drivers/char/scx200_gpio.c | 
|  | Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>, | 
|  | */ | 
|  |  | 
|  | #include <linux/fs.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/cdev.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/nsc_gpio.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/uaccess.h> | 
|  |  | 
|  | #define DEVNAME "pc8736x_gpio" | 
|  |  | 
|  | MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>"); | 
|  | MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static int major;		/* default to dynamic major */ | 
|  | module_param(major, int, 0); | 
|  | MODULE_PARM_DESC(major, "Major device number"); | 
|  |  | 
|  | static DEFINE_MUTEX(pc8736x_gpio_config_lock); | 
|  | static unsigned pc8736x_gpio_base; | 
|  | static u8 pc8736x_gpio_shadow[4]; | 
|  |  | 
|  | #define SIO_BASE1       0x2E	/* 1st command-reg to check */ | 
|  | #define SIO_BASE2       0x4E	/* alt command-reg to check */ | 
|  |  | 
|  | #define SIO_SID		0x20	/* SuperI/O ID Register */ | 
|  | #define SIO_SID_PC87365	0xe5	/* Expected value in ID Register for PC87365 */ | 
|  | #define SIO_SID_PC87366	0xe9	/* Expected value in ID Register for PC87366 */ | 
|  |  | 
|  | #define SIO_CF1		0x21	/* chip config, bit0 is chip enable */ | 
|  |  | 
|  | #define PC8736X_GPIO_RANGE	16 /* ioaddr range */ | 
|  | #define PC8736X_GPIO_CT		32 /* minors matching 4 8 bit ports */ | 
|  |  | 
|  | #define SIO_UNIT_SEL	0x7	/* unit select reg */ | 
|  | #define SIO_UNIT_ACT	0x30	/* unit enable */ | 
|  | #define SIO_GPIO_UNIT	0x7	/* unit number of GPIO */ | 
|  | #define SIO_VLM_UNIT	0x0D | 
|  | #define SIO_TMS_UNIT	0x0E | 
|  |  | 
|  | /* config-space addrs to read/write each unit's runtime addr */ | 
|  | #define SIO_BASE_HADDR		0x60 | 
|  | #define SIO_BASE_LADDR		0x61 | 
|  |  | 
|  | /* GPIO config-space pin-control addresses */ | 
|  | #define SIO_GPIO_PIN_SELECT	0xF0 | 
|  | #define SIO_GPIO_PIN_CONFIG     0xF1 | 
|  | #define SIO_GPIO_PIN_EVENT      0xF2 | 
|  |  | 
|  | static unsigned char superio_cmd = 0; | 
|  | static unsigned char selected_device = 0xFF;	/* bogus start val */ | 
|  |  | 
|  | /* GPIO port runtime access, functionality */ | 
|  | static int port_offset[] = { 0, 4, 8, 10 };	/* non-uniform offsets ! */ | 
|  | /* static int event_capable[] = { 1, 1, 0, 0 };   ports 2,3 are hobbled */ | 
|  |  | 
|  | #define PORT_OUT	0 | 
|  | #define PORT_IN		1 | 
|  | #define PORT_EVT_EN	2 | 
|  | #define PORT_EVT_STST	3 | 
|  |  | 
|  | static struct platform_device *pdev;  /* use in dev_*() */ | 
|  |  | 
|  | static inline void superio_outb(int addr, int val) | 
|  | { | 
|  | outb_p(addr, superio_cmd); | 
|  | outb_p(val, superio_cmd + 1); | 
|  | } | 
|  |  | 
|  | static inline int superio_inb(int addr) | 
|  | { | 
|  | outb_p(addr, superio_cmd); | 
|  | return inb_p(superio_cmd + 1); | 
|  | } | 
|  |  | 
|  | static int pc8736x_superio_present(void) | 
|  | { | 
|  | int id; | 
|  |  | 
|  | /* try the 2 possible values, read a hardware reg to verify */ | 
|  | superio_cmd = SIO_BASE1; | 
|  | id = superio_inb(SIO_SID); | 
|  | if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366) | 
|  | return superio_cmd; | 
|  |  | 
|  | superio_cmd = SIO_BASE2; | 
|  | id = superio_inb(SIO_SID); | 
|  | if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366) | 
|  | return superio_cmd; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void device_select(unsigned devldn) | 
|  | { | 
|  | superio_outb(SIO_UNIT_SEL, devldn); | 
|  | selected_device = devldn; | 
|  | } | 
|  |  | 
|  | static void select_pin(unsigned iminor) | 
|  | { | 
|  | /* select GPIO port/pin from device minor number */ | 
|  | device_select(SIO_GPIO_UNIT); | 
|  | superio_outb(SIO_GPIO_PIN_SELECT, | 
|  | ((iminor << 1) & 0xF0) | (iminor & 0x7)); | 
|  | } | 
|  |  | 
|  | static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits, | 
|  | u32 func_slct) | 
|  | { | 
|  | u32 config, new_config; | 
|  |  | 
|  | mutex_lock(&pc8736x_gpio_config_lock); | 
|  |  | 
|  | device_select(SIO_GPIO_UNIT); | 
|  | select_pin(index); | 
|  |  | 
|  | /* read current config value */ | 
|  | config = superio_inb(func_slct); | 
|  |  | 
|  | /* set new config */ | 
|  | new_config = (config & mask) | bits; | 
|  | superio_outb(func_slct, new_config); | 
|  |  | 
|  | mutex_unlock(&pc8736x_gpio_config_lock); | 
|  |  | 
|  | return config; | 
|  | } | 
|  |  | 
|  | static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits) | 
|  | { | 
|  | return pc8736x_gpio_configure_fn(index, mask, bits, | 
|  | SIO_GPIO_PIN_CONFIG); | 
|  | } | 
|  |  | 
|  | static int pc8736x_gpio_get(unsigned minor) | 
|  | { | 
|  | int port, bit, val; | 
|  |  | 
|  | port = minor >> 3; | 
|  | bit = minor & 7; | 
|  | val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN); | 
|  | val >>= bit; | 
|  | val &= 1; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n", | 
|  | minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit, | 
|  | val); | 
|  |  | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static void pc8736x_gpio_set(unsigned minor, int val) | 
|  | { | 
|  | int port, bit, curval; | 
|  |  | 
|  | minor &= 0x1f; | 
|  | port = minor >> 3; | 
|  | bit = minor & 7; | 
|  | curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT); | 
|  |  | 
|  | dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n", | 
|  | pc8736x_gpio_base + port_offset[port] + PORT_OUT, | 
|  | curval, bit, (curval & ~(1 << bit)), val, (val << bit)); | 
|  |  | 
|  | val = (curval & ~(1 << bit)) | (val << bit); | 
|  |  | 
|  | dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)" | 
|  | " %2x -> %2x\n", minor, port, bit, curval, val); | 
|  |  | 
|  | outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT); | 
|  |  | 
|  | curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT); | 
|  | val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN); | 
|  |  | 
|  | dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val); | 
|  | pc8736x_gpio_shadow[port] = val; | 
|  | } | 
|  |  | 
|  | static int pc8736x_gpio_current(unsigned minor) | 
|  | { | 
|  | int port, bit; | 
|  | minor &= 0x1f; | 
|  | port = minor >> 3; | 
|  | bit = minor & 7; | 
|  | return ((pc8736x_gpio_shadow[port] >> bit) & 0x01); | 
|  | } | 
|  |  | 
|  | static void pc8736x_gpio_change(unsigned index) | 
|  | { | 
|  | pc8736x_gpio_set(index, !pc8736x_gpio_current(index)); | 
|  | } | 
|  |  | 
|  | static struct nsc_gpio_ops pc8736x_gpio_ops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .gpio_config	= pc8736x_gpio_configure, | 
|  | .gpio_dump	= nsc_gpio_dump, | 
|  | .gpio_get	= pc8736x_gpio_get, | 
|  | .gpio_set	= pc8736x_gpio_set, | 
|  | .gpio_change	= pc8736x_gpio_change, | 
|  | .gpio_current	= pc8736x_gpio_current | 
|  | }; | 
|  |  | 
|  | static int pc8736x_gpio_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | unsigned m = iminor(inode); | 
|  | file->private_data = &pc8736x_gpio_ops; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "open %d\n", m); | 
|  |  | 
|  | if (m >= PC8736X_GPIO_CT) | 
|  | return -EINVAL; | 
|  | return nonseekable_open(inode, file); | 
|  | } | 
|  |  | 
|  | static const struct file_operations pc8736x_gpio_fileops = { | 
|  | .owner	= THIS_MODULE, | 
|  | .open	= pc8736x_gpio_open, | 
|  | .write	= nsc_gpio_write, | 
|  | .read	= nsc_gpio_read, | 
|  | .llseek = no_llseek, | 
|  | }; | 
|  |  | 
|  | static void __init pc8736x_init_shadow(void) | 
|  | { | 
|  | int port; | 
|  |  | 
|  | /* read the current values driven on the GPIO signals */ | 
|  | for (port = 0; port < 4; ++port) | 
|  | pc8736x_gpio_shadow[port] | 
|  | = inb_p(pc8736x_gpio_base + port_offset[port] | 
|  | + PORT_OUT); | 
|  |  | 
|  | } | 
|  |  | 
|  | static struct cdev pc8736x_gpio_cdev; | 
|  |  | 
|  | static int __init pc8736x_gpio_init(void) | 
|  | { | 
|  | int rc; | 
|  | dev_t devid; | 
|  |  | 
|  | pdev = platform_device_alloc(DEVNAME, 0); | 
|  | if (!pdev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rc = platform_device_add(pdev); | 
|  | if (rc) { | 
|  | rc = -ENODEV; | 
|  | goto undo_platform_dev_alloc; | 
|  | } | 
|  | dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n"); | 
|  |  | 
|  | if (!pc8736x_superio_present()) { | 
|  | rc = -ENODEV; | 
|  | dev_err(&pdev->dev, "no device found\n"); | 
|  | goto undo_platform_dev_add; | 
|  | } | 
|  | pc8736x_gpio_ops.dev = &pdev->dev; | 
|  |  | 
|  | /* Verify that chip and it's GPIO unit are both enabled. | 
|  | My BIOS does this, so I take minimum action here | 
|  | */ | 
|  | rc = superio_inb(SIO_CF1); | 
|  | if (!(rc & 0x01)) { | 
|  | rc = -ENODEV; | 
|  | dev_err(&pdev->dev, "device not enabled\n"); | 
|  | goto undo_platform_dev_add; | 
|  | } | 
|  | device_select(SIO_GPIO_UNIT); | 
|  | if (!superio_inb(SIO_UNIT_ACT)) { | 
|  | rc = -ENODEV; | 
|  | dev_err(&pdev->dev, "GPIO unit not enabled\n"); | 
|  | goto undo_platform_dev_add; | 
|  | } | 
|  |  | 
|  | /* read the GPIO unit base addr that chip responds to */ | 
|  | pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8 | 
|  | | superio_inb(SIO_BASE_LADDR)); | 
|  |  | 
|  | if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) { | 
|  | rc = -ENODEV; | 
|  | dev_err(&pdev->dev, "GPIO ioport %x busy\n", | 
|  | pc8736x_gpio_base); | 
|  | goto undo_platform_dev_add; | 
|  | } | 
|  | dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base); | 
|  |  | 
|  | if (major) { | 
|  | devid = MKDEV(major, 0); | 
|  | rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME); | 
|  | } else { | 
|  | rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME); | 
|  | major = MAJOR(devid); | 
|  | } | 
|  |  | 
|  | if (rc < 0) { | 
|  | dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc); | 
|  | goto undo_request_region; | 
|  | } | 
|  | if (!major) { | 
|  | major = rc; | 
|  | dev_dbg(&pdev->dev, "got dynamic major %d\n", major); | 
|  | } | 
|  |  | 
|  | pc8736x_init_shadow(); | 
|  |  | 
|  | /* ignore minor errs, and succeed */ | 
|  | cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops); | 
|  | cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | undo_request_region: | 
|  | release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); | 
|  | undo_platform_dev_add: | 
|  | platform_device_del(pdev); | 
|  | undo_platform_dev_alloc: | 
|  | platform_device_put(pdev); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void __exit pc8736x_gpio_cleanup(void) | 
|  | { | 
|  | dev_dbg(&pdev->dev, "cleanup\n"); | 
|  |  | 
|  | cdev_del(&pc8736x_gpio_cdev); | 
|  | unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT); | 
|  | release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); | 
|  |  | 
|  | platform_device_unregister(pdev); | 
|  | } | 
|  |  | 
|  | module_init(pc8736x_gpio_init); | 
|  | module_exit(pc8736x_gpio_cleanup); |