|  | /* | 
|  | * Copyright (c) 2008, 2009 open80211s Ltd. | 
|  | * Authors:    Luis Carlos Cobo <luisca@cozybit.com> | 
|  | * 	       Javier Cardona <javier@cozybit.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <asm/unaligned.h> | 
|  | #include "ieee80211_i.h" | 
|  | #include "mesh.h" | 
|  | #include "driver-ops.h" | 
|  |  | 
|  | static int mesh_allocated; | 
|  | static struct kmem_cache *rm_cache; | 
|  |  | 
|  | bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | 
|  | { | 
|  | return (mgmt->u.action.u.mesh_action.action_code == | 
|  | WLAN_MESH_ACTION_HWMP_PATH_SELECTION); | 
|  | } | 
|  |  | 
|  | void ieee80211s_init(void) | 
|  | { | 
|  | mesh_allocated = 1; | 
|  | rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), | 
|  | 0, 0, NULL); | 
|  | } | 
|  |  | 
|  | void ieee80211s_stop(void) | 
|  | { | 
|  | if (!mesh_allocated) | 
|  | return; | 
|  | kmem_cache_destroy(rm_cache); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_housekeeping_timer(struct timer_list *t) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | from_timer(sdata, t, u.mesh.housekeeping_timer); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_matches_local - check if the config of a mesh point matches ours | 
|  | * | 
|  | * @sdata: local mesh subif | 
|  | * @ie: information elements of a management frame from the mesh peer | 
|  | * | 
|  | * This function checks if the mesh configuration of a mesh point matches the | 
|  | * local mesh configuration, i.e. if both nodes belong to the same mesh network. | 
|  | */ | 
|  | bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee802_11_elems *ie) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u32 basic_rates = 0; | 
|  | struct cfg80211_chan_def sta_chan_def; | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | /* | 
|  | * As support for each feature is added, check for matching | 
|  | * - On mesh config capabilities | 
|  | *   - Power Save Support En | 
|  | *   - Sync support enabled | 
|  | *   - Sync support active | 
|  | *   - Sync support required from peer | 
|  | *   - MDA enabled | 
|  | * - Power management control on fc | 
|  | */ | 
|  | if (!(ifmsh->mesh_id_len == ie->mesh_id_len && | 
|  | memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && | 
|  | (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && | 
|  | (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && | 
|  | (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && | 
|  | (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && | 
|  | (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) | 
|  | return false; | 
|  |  | 
|  | sband = ieee80211_get_sband(sdata); | 
|  | if (!sband) | 
|  | return false; | 
|  |  | 
|  | ieee80211_sta_get_rates(sdata, ie, sband->band, | 
|  | &basic_rates); | 
|  |  | 
|  | if (sdata->vif.bss_conf.basic_rates != basic_rates) | 
|  | return false; | 
|  |  | 
|  | cfg80211_chandef_create(&sta_chan_def, sdata->vif.bss_conf.chandef.chan, | 
|  | NL80211_CHAN_NO_HT); | 
|  | ieee80211_chandef_ht_oper(ie->ht_operation, &sta_chan_def); | 
|  | ieee80211_chandef_vht_oper(ie->vht_operation, &sta_chan_def); | 
|  |  | 
|  | if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef, | 
|  | &sta_chan_def)) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links | 
|  | * | 
|  | * @ie: information elements of a management frame from the mesh peer | 
|  | */ | 
|  | bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) | 
|  | { | 
|  | return (ie->mesh_config->meshconf_cap & | 
|  | IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_accept_plinks_update - update accepting_plink in local mesh beacons | 
|  | * | 
|  | * @sdata: mesh interface in which mesh beacons are going to be updated | 
|  | * | 
|  | * Returns: beacon changed flag if the beacon content changed. | 
|  | */ | 
|  | u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | bool free_plinks; | 
|  | u32 changed = 0; | 
|  |  | 
|  | /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, | 
|  | * the mesh interface might be able to establish plinks with peers that | 
|  | * are already on the table but are not on PLINK_ESTAB state. However, | 
|  | * in general the mesh interface is not accepting peer link requests | 
|  | * from new peers, and that must be reflected in the beacon | 
|  | */ | 
|  | free_plinks = mesh_plink_availables(sdata); | 
|  |  | 
|  | if (free_plinks != sdata->u.mesh.accepting_plinks) { | 
|  | sdata->u.mesh.accepting_plinks = free_plinks; | 
|  | changed = BSS_CHANGED_BEACON; | 
|  | } | 
|  |  | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mesh_sta_cleanup - clean up any mesh sta state | 
|  | * | 
|  | * @sta: mesh sta to clean up. | 
|  | */ | 
|  | void mesh_sta_cleanup(struct sta_info *sta) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = sta->sdata; | 
|  | u32 changed = mesh_plink_deactivate(sta); | 
|  |  | 
|  | if (changed) | 
|  | ieee80211_mbss_info_change_notify(sdata, changed); | 
|  | } | 
|  |  | 
|  | int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); | 
|  | if (!sdata->u.mesh.rmc) | 
|  | return -ENOMEM; | 
|  | sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; | 
|  | for (i = 0; i < RMC_BUCKETS; i++) | 
|  | INIT_HLIST_HEAD(&sdata->u.mesh.rmc->bucket[i]); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
|  | struct rmc_entry *p; | 
|  | struct hlist_node *n; | 
|  | int i; | 
|  |  | 
|  | if (!sdata->u.mesh.rmc) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < RMC_BUCKETS; i++) { | 
|  | hlist_for_each_entry_safe(p, n, &rmc->bucket[i], list) { | 
|  | hlist_del(&p->list); | 
|  | kmem_cache_free(rm_cache, p); | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree(rmc); | 
|  | sdata->u.mesh.rmc = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mesh_rmc_check - Check frame in recent multicast cache and add if absent. | 
|  | * | 
|  | * @sdata:	interface | 
|  | * @sa:		source address | 
|  | * @mesh_hdr:	mesh_header | 
|  | * | 
|  | * Returns: 0 if the frame is not in the cache, nonzero otherwise. | 
|  | * | 
|  | * Checks using the source address and the mesh sequence number if we have | 
|  | * received this frame lately. If the frame is not in the cache, it is added to | 
|  | * it. | 
|  | */ | 
|  | int mesh_rmc_check(struct ieee80211_sub_if_data *sdata, | 
|  | const u8 *sa, struct ieee80211s_hdr *mesh_hdr) | 
|  | { | 
|  | struct mesh_rmc *rmc = sdata->u.mesh.rmc; | 
|  | u32 seqnum = 0; | 
|  | int entries = 0; | 
|  | u8 idx; | 
|  | struct rmc_entry *p; | 
|  | struct hlist_node *n; | 
|  |  | 
|  | if (!rmc) | 
|  | return -1; | 
|  |  | 
|  | /* Don't care about endianness since only match matters */ | 
|  | memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); | 
|  | idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; | 
|  | hlist_for_each_entry_safe(p, n, &rmc->bucket[idx], list) { | 
|  | ++entries; | 
|  | if (time_after(jiffies, p->exp_time) || | 
|  | entries == RMC_QUEUE_MAX_LEN) { | 
|  | hlist_del(&p->list); | 
|  | kmem_cache_free(rm_cache, p); | 
|  | --entries; | 
|  | } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa)) | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); | 
|  | if (!p) | 
|  | return 0; | 
|  |  | 
|  | p->seqnum = seqnum; | 
|  | p->exp_time = jiffies + RMC_TIMEOUT; | 
|  | memcpy(p->sa, sa, ETH_ALEN); | 
|  | hlist_add_head(&p->list, &rmc->bucket[idx]); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 *pos, neighbors; | 
|  | u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + meshconf_len) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + meshconf_len); | 
|  | *pos++ = WLAN_EID_MESH_CONFIG; | 
|  | *pos++ = meshconf_len; | 
|  |  | 
|  | /* save a pointer for quick updates in pre-tbtt */ | 
|  | ifmsh->meshconf_offset = pos - skb->data; | 
|  |  | 
|  | /* Active path selection protocol ID */ | 
|  | *pos++ = ifmsh->mesh_pp_id; | 
|  | /* Active path selection metric ID   */ | 
|  | *pos++ = ifmsh->mesh_pm_id; | 
|  | /* Congestion control mode identifier */ | 
|  | *pos++ = ifmsh->mesh_cc_id; | 
|  | /* Synchronization protocol identifier */ | 
|  | *pos++ = ifmsh->mesh_sp_id; | 
|  | /* Authentication Protocol identifier */ | 
|  | *pos++ = ifmsh->mesh_auth_id; | 
|  | /* Mesh Formation Info - number of neighbors */ | 
|  | neighbors = atomic_read(&ifmsh->estab_plinks); | 
|  | neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS); | 
|  | *pos++ = neighbors << 1; | 
|  | /* Mesh capability */ | 
|  | *pos = 0x00; | 
|  | *pos |= ifmsh->mshcfg.dot11MeshForwarding ? | 
|  | IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00; | 
|  | *pos |= ifmsh->accepting_plinks ? | 
|  | IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; | 
|  | /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ | 
|  | *pos |= ifmsh->ps_peers_deep_sleep ? | 
|  | IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 *pos; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + ifmsh->mesh_id_len); | 
|  | *pos++ = WLAN_EID_MESH_ID; | 
|  | *pos++ = ifmsh->mesh_id_len; | 
|  | if (ifmsh->mesh_id_len) | 
|  | memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 *pos; | 
|  |  | 
|  | /* see IEEE802.11-2012 13.14.6 */ | 
|  | if (ifmsh->ps_peers_light_sleep == 0 && | 
|  | ifmsh->ps_peers_deep_sleep == 0 && | 
|  | ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 4) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + 2); | 
|  | *pos++ = WLAN_EID_MESH_AWAKE_WINDOW; | 
|  | *pos++ = 2; | 
|  | put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 offset, len; | 
|  | const u8 *data; | 
|  |  | 
|  | if (!ifmsh->ie || !ifmsh->ie_len) | 
|  | return 0; | 
|  |  | 
|  | /* fast-forward to vendor IEs */ | 
|  | offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0); | 
|  |  | 
|  | if (offset < ifmsh->ie_len) { | 
|  | len = ifmsh->ie_len - offset; | 
|  | data = ifmsh->ie + offset; | 
|  | if (skb_tailroom(skb) < len) | 
|  | return -ENOMEM; | 
|  | skb_put_data(skb, data, len); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u8 len = 0; | 
|  | const u8 *data; | 
|  |  | 
|  | if (!ifmsh->ie || !ifmsh->ie_len) | 
|  | return 0; | 
|  |  | 
|  | /* find RSN IE */ | 
|  | data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len); | 
|  | if (!data) | 
|  | return 0; | 
|  |  | 
|  | len = data[1] + 2; | 
|  |  | 
|  | if (skb_tailroom(skb) < len) | 
|  | return -ENOMEM; | 
|  | skb_put_data(skb, data, len); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | struct ieee80211_channel *chan; | 
|  | u8 *pos; | 
|  |  | 
|  | if (skb_tailroom(skb) < 3) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | if (WARN_ON(!chanctx_conf)) { | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  | chan = chanctx_conf->def.chan; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | pos = skb_put(skb, 2 + 1); | 
|  | *pos++ = WLAN_EID_DS_PARAMS; | 
|  | *pos++ = 1; | 
|  | *pos++ = ieee80211_frequency_to_channel(chan->center_freq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_supported_band *sband; | 
|  | u8 *pos; | 
|  |  | 
|  | sband = ieee80211_get_sband(sdata); | 
|  | if (!sband) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!sband->ht_cap.ht_supported || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap)); | 
|  | ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | struct ieee80211_channel *channel; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_sta_ht_cap *ht_cap; | 
|  | u8 *pos; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | if (WARN_ON(!chanctx_conf)) { | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  | channel = chanctx_conf->def.chan; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | sband = local->hw.wiphy->bands[channel->band]; | 
|  | ht_cap = &sband->ht_cap; | 
|  |  | 
|  | if (!ht_cap->ht_supported || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation)); | 
|  | ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef, | 
|  | sdata->vif.bss_conf.ht_operation_mode, | 
|  | false); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_supported_band *sband; | 
|  | u8 *pos; | 
|  |  | 
|  | sband = ieee80211_get_sband(sdata); | 
|  | if (!sband) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!sband->vht_cap.vht_supported || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap)); | 
|  | ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | struct ieee80211_channel *channel; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_sta_vht_cap *vht_cap; | 
|  | u8 *pos; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | if (WARN_ON(!chanctx_conf)) { | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  | channel = chanctx_conf->def.chan; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | sband = local->hw.wiphy->bands[channel->band]; | 
|  | vht_cap = &sband->vht_cap; | 
|  |  | 
|  | if (!vht_cap->vht_supported || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 || | 
|  | sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10) | 
|  | return 0; | 
|  |  | 
|  | if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation)); | 
|  | ieee80211_ie_build_vht_oper(pos, vht_cap, | 
|  | &sdata->vif.bss_conf.chandef); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_path_timer(struct timer_list *t) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | from_timer(sdata, t, u.mesh.mesh_path_timer); | 
|  |  | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_path_root_timer(struct timer_list *t) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | from_timer(sdata, t, u.mesh.mesh_path_root_timer); | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  |  | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) | 
|  | { | 
|  | if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT) | 
|  | set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | else { | 
|  | clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | 
|  | /* stop running timer */ | 
|  | del_timer_sync(&ifmsh->mesh_path_root_timer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame | 
|  | * @hdr:	802.11 frame header | 
|  | * @fc:		frame control field | 
|  | * @meshda:	destination address in the mesh | 
|  | * @meshsa:	source address address in the mesh.  Same as TA, as frame is | 
|  | *              locally originated. | 
|  | * | 
|  | * Return the length of the 802.11 (does not include a mesh control header) | 
|  | */ | 
|  | int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, | 
|  | const u8 *meshda, const u8 *meshsa) | 
|  | { | 
|  | if (is_multicast_ether_addr(meshda)) { | 
|  | *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
|  | /* DA TA SA */ | 
|  | memcpy(hdr->addr1, meshda, ETH_ALEN); | 
|  | memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
|  | memcpy(hdr->addr3, meshsa, ETH_ALEN); | 
|  | return 24; | 
|  | } else { | 
|  | *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
|  | /* RA TA DA SA */ | 
|  | eth_zero_addr(hdr->addr1);   /* RA is resolved later */ | 
|  | memcpy(hdr->addr2, meshsa, ETH_ALEN); | 
|  | memcpy(hdr->addr3, meshda, ETH_ALEN); | 
|  | memcpy(hdr->addr4, meshsa, ETH_ALEN); | 
|  | return 30; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ieee80211_new_mesh_header - create a new mesh header | 
|  | * @sdata:	mesh interface to be used | 
|  | * @meshhdr:    uninitialized mesh header | 
|  | * @addr4or5:   1st address in the ae header, which may correspond to address 4 | 
|  | *              (if addr6 is NULL) or address 5 (if addr6 is present). It may | 
|  | *              be NULL. | 
|  | * @addr6:	2nd address in the ae header, which corresponds to addr6 of the | 
|  | *              mesh frame | 
|  | * | 
|  | * Return the header length. | 
|  | */ | 
|  | unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211s_hdr *meshhdr, | 
|  | const char *addr4or5, const char *addr6) | 
|  | { | 
|  | if (WARN_ON(!addr4or5 && addr6)) | 
|  | return 0; | 
|  |  | 
|  | memset(meshhdr, 0, sizeof(*meshhdr)); | 
|  |  | 
|  | meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | 
|  |  | 
|  | /* FIXME: racy -- TX on multiple queues can be concurrent */ | 
|  | put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); | 
|  | sdata->u.mesh.mesh_seqnum++; | 
|  |  | 
|  | if (addr4or5 && !addr6) { | 
|  | meshhdr->flags |= MESH_FLAGS_AE_A4; | 
|  | memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
|  | return 2 * ETH_ALEN; | 
|  | } else if (addr4or5 && addr6) { | 
|  | meshhdr->flags |= MESH_FLAGS_AE_A5_A6; | 
|  | memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | 
|  | memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); | 
|  | return 3 * ETH_ALEN; | 
|  | } | 
|  |  | 
|  | return ETH_ALEN; | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u32 changed; | 
|  |  | 
|  | if (ifmsh->mshcfg.plink_timeout > 0) | 
|  | ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ); | 
|  | mesh_path_expire(sdata); | 
|  |  | 
|  | changed = mesh_accept_plinks_update(sdata); | 
|  | ieee80211_mbss_info_change_notify(sdata, changed); | 
|  |  | 
|  | mod_timer(&ifmsh->housekeeping_timer, | 
|  | round_jiffies(jiffies + | 
|  | IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u32 interval; | 
|  |  | 
|  | mesh_path_tx_root_frame(sdata); | 
|  |  | 
|  | if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN) | 
|  | interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; | 
|  | else | 
|  | interval = ifmsh->mshcfg.dot11MeshHWMProotInterval; | 
|  |  | 
|  | mod_timer(&ifmsh->mesh_path_root_timer, | 
|  | round_jiffies(TU_TO_EXP_TIME(interval))); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) | 
|  | { | 
|  | struct beacon_data *bcn; | 
|  | int head_len, tail_len; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | struct mesh_csa_settings *csa; | 
|  | enum nl80211_band band; | 
|  | u8 *pos; | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int hdr_len = offsetofend(struct ieee80211_mgmt, u.beacon); | 
|  |  | 
|  | sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
|  | band = chanctx_conf->def.chan->band; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | head_len = hdr_len + | 
|  | 2 + /* NULL SSID */ | 
|  | /* Channel Switch Announcement */ | 
|  | 2 + sizeof(struct ieee80211_channel_sw_ie) + | 
|  | /* Mesh Channel Switch Parameters */ | 
|  | 2 + sizeof(struct ieee80211_mesh_chansw_params_ie) + | 
|  | /* Channel Switch Wrapper + Wide Bandwidth CSA IE */ | 
|  | 2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie) + | 
|  | 2 + sizeof(struct ieee80211_sec_chan_offs_ie) + | 
|  | 2 + 8 + /* supported rates */ | 
|  | 2 + 3; /* DS params */ | 
|  | tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) + | 
|  | 2 + sizeof(struct ieee80211_ht_cap) + | 
|  | 2 + sizeof(struct ieee80211_ht_operation) + | 
|  | 2 + ifmsh->mesh_id_len + | 
|  | 2 + sizeof(struct ieee80211_meshconf_ie) + | 
|  | 2 + sizeof(__le16) + /* awake window */ | 
|  | 2 + sizeof(struct ieee80211_vht_cap) + | 
|  | 2 + sizeof(struct ieee80211_vht_operation) + | 
|  | ifmsh->ie_len; | 
|  |  | 
|  | bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL); | 
|  | /* need an skb for IE builders to operate on */ | 
|  | skb = dev_alloc_skb(max(head_len, tail_len)); | 
|  |  | 
|  | if (!bcn || !skb) | 
|  | goto out_free; | 
|  |  | 
|  | /* | 
|  | * pointers go into the block we allocated, | 
|  | * memory is | beacon_data | head | tail | | 
|  | */ | 
|  | bcn->head = ((u8 *) bcn) + sizeof(*bcn); | 
|  |  | 
|  | /* fill in the head */ | 
|  | mgmt = skb_put_zero(skb, hdr_len); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_BEACON); | 
|  | eth_broadcast_addr(mgmt->da); | 
|  | memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); | 
|  | ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); | 
|  | mgmt->u.beacon.beacon_int = | 
|  | cpu_to_le16(sdata->vif.bss_conf.beacon_int); | 
|  | mgmt->u.beacon.capab_info |= cpu_to_le16( | 
|  | sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); | 
|  |  | 
|  | pos = skb_put(skb, 2); | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = 0x0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | csa = rcu_dereference(ifmsh->csa); | 
|  | if (csa) { | 
|  | enum nl80211_channel_type ct; | 
|  | struct cfg80211_chan_def *chandef; | 
|  | int ie_len = 2 + sizeof(struct ieee80211_channel_sw_ie) + | 
|  | 2 + sizeof(struct ieee80211_mesh_chansw_params_ie); | 
|  |  | 
|  | pos = skb_put_zero(skb, ie_len); | 
|  | *pos++ = WLAN_EID_CHANNEL_SWITCH; | 
|  | *pos++ = 3; | 
|  | *pos++ = 0x0; | 
|  | *pos++ = ieee80211_frequency_to_channel( | 
|  | csa->settings.chandef.chan->center_freq); | 
|  | bcn->csa_current_counter = csa->settings.count; | 
|  | bcn->csa_counter_offsets[0] = hdr_len + 6; | 
|  | *pos++ = csa->settings.count; | 
|  | *pos++ = WLAN_EID_CHAN_SWITCH_PARAM; | 
|  | *pos++ = 6; | 
|  | if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) { | 
|  | *pos++ = ifmsh->mshcfg.dot11MeshTTL; | 
|  | *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; | 
|  | } else { | 
|  | *pos++ = ifmsh->chsw_ttl; | 
|  | } | 
|  | *pos++ |= csa->settings.block_tx ? | 
|  | WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00; | 
|  | put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos); | 
|  | pos += 2; | 
|  | put_unaligned_le16(ifmsh->pre_value, pos); | 
|  | pos += 2; | 
|  |  | 
|  | switch (csa->settings.chandef.width) { | 
|  | case NL80211_CHAN_WIDTH_40: | 
|  | ie_len = 2 + sizeof(struct ieee80211_sec_chan_offs_ie); | 
|  | pos = skb_put_zero(skb, ie_len); | 
|  |  | 
|  | *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */ | 
|  | *pos++ = 1;				    /* len */ | 
|  | ct = cfg80211_get_chandef_type(&csa->settings.chandef); | 
|  | if (ct == NL80211_CHAN_HT40PLUS) | 
|  | *pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | 
|  | else | 
|  | *pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_80: | 
|  | case NL80211_CHAN_WIDTH_80P80: | 
|  | case NL80211_CHAN_WIDTH_160: | 
|  | /* Channel Switch Wrapper + Wide Bandwidth CSA IE */ | 
|  | ie_len = 2 + 2 + | 
|  | sizeof(struct ieee80211_wide_bw_chansw_ie); | 
|  | pos = skb_put_zero(skb, ie_len); | 
|  |  | 
|  | *pos++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER; /* EID */ | 
|  | *pos++ = 5;				  /* len */ | 
|  | /* put sub IE */ | 
|  | chandef = &csa->settings.chandef; | 
|  | ieee80211_ie_build_wide_bw_cs(pos, chandef); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (ieee80211_add_srates_ie(sdata, skb, true, band) || | 
|  | mesh_add_ds_params_ie(sdata, skb)) | 
|  | goto out_free; | 
|  |  | 
|  | bcn->head_len = skb->len; | 
|  | memcpy(bcn->head, skb->data, bcn->head_len); | 
|  |  | 
|  | /* now the tail */ | 
|  | skb_trim(skb, 0); | 
|  | bcn->tail = bcn->head + bcn->head_len; | 
|  |  | 
|  | if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) || | 
|  | mesh_add_rsn_ie(sdata, skb) || | 
|  | mesh_add_ht_cap_ie(sdata, skb) || | 
|  | mesh_add_ht_oper_ie(sdata, skb) || | 
|  | mesh_add_meshid_ie(sdata, skb) || | 
|  | mesh_add_meshconf_ie(sdata, skb) || | 
|  | mesh_add_awake_window_ie(sdata, skb) || | 
|  | mesh_add_vht_cap_ie(sdata, skb) || | 
|  | mesh_add_vht_oper_ie(sdata, skb) || | 
|  | mesh_add_vendor_ies(sdata, skb)) | 
|  | goto out_free; | 
|  |  | 
|  | bcn->tail_len = skb->len; | 
|  | memcpy(bcn->tail, skb->data, bcn->tail_len); | 
|  | bcn->meshconf = (struct ieee80211_meshconf_ie *) | 
|  | (bcn->tail + ifmsh->meshconf_offset); | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  | rcu_assign_pointer(ifmsh->beacon, bcn); | 
|  | return 0; | 
|  | out_free: | 
|  | kfree(bcn); | 
|  | dev_kfree_skb(skb); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct beacon_data *old_bcn; | 
|  | int ret; | 
|  |  | 
|  | old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon, | 
|  | lockdep_is_held(&sdata->wdev.mtx)); | 
|  | ret = ieee80211_mesh_build_beacon(&sdata->u.mesh); | 
|  | if (ret) | 
|  | /* just reuse old beacon */ | 
|  | return ret; | 
|  |  | 
|  | if (old_bcn) | 
|  | kfree_rcu(old_bcn, rcu_head); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, | 
|  | u32 changed) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | unsigned long bits = changed; | 
|  | u32 bit; | 
|  |  | 
|  | if (!bits) | 
|  | return; | 
|  |  | 
|  | /* if we race with running work, worst case this work becomes a noop */ | 
|  | for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE) | 
|  | set_bit(bit, &ifmsh->mbss_changed); | 
|  | set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags); | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 changed = BSS_CHANGED_BEACON | | 
|  | BSS_CHANGED_BEACON_ENABLED | | 
|  | BSS_CHANGED_HT | | 
|  | BSS_CHANGED_BASIC_RATES | | 
|  | BSS_CHANGED_BEACON_INT | | 
|  | BSS_CHANGED_MCAST_RATE; | 
|  |  | 
|  | local->fif_other_bss++; | 
|  | /* mesh ifaces must set allmulti to forward mcast traffic */ | 
|  | atomic_inc(&local->iff_allmultis); | 
|  | ieee80211_configure_filter(local); | 
|  |  | 
|  | ifmsh->mesh_cc_id = 0;	/* Disabled */ | 
|  | /* register sync ops from extensible synchronization framework */ | 
|  | ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id); | 
|  | ifmsh->sync_offset_clockdrift_max = 0; | 
|  | set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | 
|  | ieee80211_mesh_root_setup(ifmsh); | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | sdata->vif.bss_conf.ht_operation_mode = | 
|  | ifmsh->mshcfg.ht_opmode; | 
|  | sdata->vif.bss_conf.enable_beacon = true; | 
|  |  | 
|  | changed |= ieee80211_mps_local_status_update(sdata); | 
|  |  | 
|  | if (ieee80211_mesh_build_beacon(ifmsh)) { | 
|  | ieee80211_stop_mesh(sdata); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ieee80211_recalc_dtim(local, sdata); | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | netif_carrier_on(sdata->dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct beacon_data *bcn; | 
|  |  | 
|  | netif_carrier_off(sdata->dev); | 
|  |  | 
|  | /* flush STAs and mpaths on this iface */ | 
|  | sta_info_flush(sdata); | 
|  | ieee80211_free_keys(sdata, true); | 
|  | mesh_path_flush_by_iface(sdata); | 
|  |  | 
|  | /* stop the beacon */ | 
|  | ifmsh->mesh_id_len = 0; | 
|  | sdata->vif.bss_conf.enable_beacon = false; | 
|  | clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | 
|  |  | 
|  | /* remove beacon */ | 
|  | bcn = rcu_dereference_protected(ifmsh->beacon, | 
|  | lockdep_is_held(&sdata->wdev.mtx)); | 
|  | RCU_INIT_POINTER(ifmsh->beacon, NULL); | 
|  | kfree_rcu(bcn, rcu_head); | 
|  |  | 
|  | /* free all potentially still buffered group-addressed frames */ | 
|  | local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); | 
|  | skb_queue_purge(&ifmsh->ps.bc_buf); | 
|  |  | 
|  | del_timer_sync(&sdata->u.mesh.housekeeping_timer); | 
|  | del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); | 
|  | del_timer_sync(&sdata->u.mesh.mesh_path_timer); | 
|  |  | 
|  | /* clear any mesh work (for next join) we may have accrued */ | 
|  | ifmsh->wrkq_flags = 0; | 
|  | ifmsh->mbss_changed = 0; | 
|  |  | 
|  | local->fif_other_bss--; | 
|  | atomic_dec(&local->iff_allmultis); | 
|  | ieee80211_configure_filter(local); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | /* if the current channel is a DFS channel, mark the channel as | 
|  | * unavailable. | 
|  | */ | 
|  | err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, | 
|  | &sdata->vif.bss_conf.chandef, | 
|  | NL80211_IFTYPE_MESH_POINT); | 
|  | if (err > 0) | 
|  | cfg80211_radar_event(sdata->local->hw.wiphy, | 
|  | &sdata->vif.bss_conf.chandef, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee802_11_elems *elems, bool beacon) | 
|  | { | 
|  | struct cfg80211_csa_settings params; | 
|  | struct ieee80211_csa_ie csa_ie; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee80211_supported_band *sband; | 
|  | int err; | 
|  | u32 sta_flags; | 
|  |  | 
|  | sdata_assert_lock(sdata); | 
|  |  | 
|  | sband = ieee80211_get_sband(sdata); | 
|  | if (!sband) | 
|  | return false; | 
|  |  | 
|  | sta_flags = 0; | 
|  | switch (sdata->vif.bss_conf.chandef.width) { | 
|  | case NL80211_CHAN_WIDTH_20_NOHT: | 
|  | sta_flags |= IEEE80211_STA_DISABLE_HT; | 
|  | /* fall through */ | 
|  | case NL80211_CHAN_WIDTH_20: | 
|  | sta_flags |= IEEE80211_STA_DISABLE_40MHZ; | 
|  | /* fall through */ | 
|  | case NL80211_CHAN_WIDTH_40: | 
|  | sta_flags |= IEEE80211_STA_DISABLE_VHT; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  | err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band, | 
|  | sta_flags, sdata->vif.addr, | 
|  | &csa_ie); | 
|  | if (err < 0) | 
|  | return false; | 
|  | if (err) | 
|  | return false; | 
|  |  | 
|  | /* Mark the channel unavailable if the reason for the switch is | 
|  | * regulatory. | 
|  | */ | 
|  | if (csa_ie.reason_code == WLAN_REASON_MESH_CHAN_REGULATORY) | 
|  | ieee80211_mesh_csa_mark_radar(sdata); | 
|  |  | 
|  | params.chandef = csa_ie.chandef; | 
|  | params.count = csa_ie.count; | 
|  |  | 
|  | if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, | 
|  | IEEE80211_CHAN_DISABLED) || | 
|  | !cfg80211_reg_can_beacon(sdata->local->hw.wiphy, ¶ms.chandef, | 
|  | NL80211_IFTYPE_MESH_POINT)) { | 
|  | sdata_info(sdata, | 
|  | "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n", | 
|  | sdata->vif.addr, | 
|  | params.chandef.chan->center_freq, | 
|  | params.chandef.width, | 
|  | params.chandef.center_freq1, | 
|  | params.chandef.center_freq2); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, | 
|  | ¶ms.chandef, | 
|  | NL80211_IFTYPE_MESH_POINT); | 
|  | if (err < 0) | 
|  | return false; | 
|  | if (err > 0 && !ifmsh->userspace_handles_dfs) { | 
|  | sdata_info(sdata, | 
|  | "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n", | 
|  | sdata->vif.addr, | 
|  | params.chandef.chan->center_freq, | 
|  | params.chandef.width, | 
|  | params.chandef.center_freq1, | 
|  | params.chandef.center_freq2); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | params.radar_required = err; | 
|  |  | 
|  | if (cfg80211_chandef_identical(¶ms.chandef, | 
|  | &sdata->vif.bss_conf.chandef)) { | 
|  | mcsa_dbg(sdata, | 
|  | "received csa with an identical chandef, ignoring\n"); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | mcsa_dbg(sdata, | 
|  | "received channel switch announcement to go to channel %d MHz\n", | 
|  | params.chandef.chan->center_freq); | 
|  |  | 
|  | params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT; | 
|  | if (beacon) { | 
|  | ifmsh->chsw_ttl = csa_ie.ttl - 1; | 
|  | if (ifmsh->pre_value >= csa_ie.pre_value) | 
|  | return false; | 
|  | ifmsh->pre_value = csa_ie.pre_value; | 
|  | } | 
|  |  | 
|  | if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL) | 
|  | return false; | 
|  |  | 
|  | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER; | 
|  |  | 
|  | if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev, | 
|  | ¶ms) < 0) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct sk_buff *presp; | 
|  | struct beacon_data *bcn; | 
|  | struct ieee80211_mgmt *hdr; | 
|  | struct ieee802_11_elems elems; | 
|  | size_t baselen; | 
|  | u8 *pos; | 
|  |  | 
|  | pos = mgmt->u.probe_req.variable; | 
|  | baselen = (u8 *) pos - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | ieee802_11_parse_elems(pos, len - baselen, false, &elems); | 
|  |  | 
|  | if (!elems.mesh_id) | 
|  | return; | 
|  |  | 
|  | /* 802.11-2012 10.1.4.3.2 */ | 
|  | if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && | 
|  | !is_broadcast_ether_addr(mgmt->da)) || | 
|  | elems.ssid_len != 0) | 
|  | return; | 
|  |  | 
|  | if (elems.mesh_id_len != 0 && | 
|  | (elems.mesh_id_len != ifmsh->mesh_id_len || | 
|  | memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len))) | 
|  | return; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | bcn = rcu_dereference(ifmsh->beacon); | 
|  |  | 
|  | if (!bcn) | 
|  | goto out; | 
|  |  | 
|  | presp = dev_alloc_skb(local->tx_headroom + | 
|  | bcn->head_len + bcn->tail_len); | 
|  | if (!presp) | 
|  | goto out; | 
|  |  | 
|  | skb_reserve(presp, local->tx_headroom); | 
|  | skb_put_data(presp, bcn->head, bcn->head_len); | 
|  | skb_put_data(presp, bcn->tail, bcn->tail_len); | 
|  | hdr = (struct ieee80211_mgmt *) presp->data; | 
|  | hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_PROBE_RESP); | 
|  | memcpy(hdr->da, mgmt->sa, ETH_ALEN); | 
|  | IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | ieee80211_tx_skb(sdata, presp); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, | 
|  | u16 stype, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee802_11_elems elems; | 
|  | struct ieee80211_channel *channel; | 
|  | size_t baselen; | 
|  | int freq; | 
|  | enum nl80211_band band = rx_status->band; | 
|  |  | 
|  | /* ignore ProbeResp to foreign address */ | 
|  | if (stype == IEEE80211_STYPE_PROBE_RESP && | 
|  | !ether_addr_equal(mgmt->da, sdata->vif.addr)) | 
|  | return; | 
|  |  | 
|  | baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, | 
|  | false, &elems); | 
|  |  | 
|  | /* ignore non-mesh or secure / unsecure mismatch */ | 
|  | if ((!elems.mesh_id || !elems.mesh_config) || | 
|  | (elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) || | 
|  | (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)) | 
|  | return; | 
|  |  | 
|  | if (elems.ds_params) | 
|  | freq = ieee80211_channel_to_frequency(elems.ds_params[0], band); | 
|  | else | 
|  | freq = rx_status->freq; | 
|  |  | 
|  | channel = ieee80211_get_channel(local->hw.wiphy, freq); | 
|  |  | 
|  | if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | if (mesh_matches_local(sdata, &elems)) { | 
|  | mpl_dbg(sdata, "rssi_threshold=%d,rx_status->signal=%d\n", | 
|  | sdata->u.mesh.mshcfg.rssi_threshold, rx_status->signal); | 
|  | if (!sdata->u.mesh.user_mpm || | 
|  | sdata->u.mesh.mshcfg.rssi_threshold == 0 || | 
|  | sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal) | 
|  | mesh_neighbour_update(sdata, mgmt->sa, &elems); | 
|  | } | 
|  |  | 
|  | if (ifmsh->sync_ops) | 
|  | ifmsh->sync_ops->rx_bcn_presp(sdata, | 
|  | stype, mgmt, &elems, rx_status); | 
|  |  | 
|  | if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT && | 
|  | !sdata->vif.csa_active) | 
|  | ieee80211_mesh_process_chnswitch(sdata, &elems, true); | 
|  | } | 
|  |  | 
|  | int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct mesh_csa_settings *tmp_csa_settings; | 
|  | int ret = 0; | 
|  | int changed = 0; | 
|  |  | 
|  | /* Reset the TTL value and Initiator flag */ | 
|  | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | 
|  | ifmsh->chsw_ttl = 0; | 
|  |  | 
|  | /* Remove the CSA and MCSP elements from the beacon */ | 
|  | tmp_csa_settings = rcu_dereference_protected(ifmsh->csa, | 
|  | lockdep_is_held(&sdata->wdev.mtx)); | 
|  | RCU_INIT_POINTER(ifmsh->csa, NULL); | 
|  | if (tmp_csa_settings) | 
|  | kfree_rcu(tmp_csa_settings, rcu_head); | 
|  | ret = ieee80211_mesh_rebuild_beacon(sdata); | 
|  | if (ret) | 
|  | return -EINVAL; | 
|  |  | 
|  | changed |= BSS_CHANGED_BEACON; | 
|  |  | 
|  | mcsa_dbg(sdata, "complete switching to center freq %d MHz", | 
|  | sdata->vif.bss_conf.chandef.chan->center_freq); | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_csa_settings *csa_settings) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct mesh_csa_settings *tmp_csa_settings; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&sdata->wdev.mtx); | 
|  |  | 
|  | tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings), | 
|  | GFP_ATOMIC); | 
|  | if (!tmp_csa_settings) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memcpy(&tmp_csa_settings->settings, csa_settings, | 
|  | sizeof(struct cfg80211_csa_settings)); | 
|  |  | 
|  | rcu_assign_pointer(ifmsh->csa, tmp_csa_settings); | 
|  |  | 
|  | ret = ieee80211_mesh_rebuild_beacon(sdata); | 
|  | if (ret) { | 
|  | tmp_csa_settings = rcu_dereference(ifmsh->csa); | 
|  | RCU_INIT_POINTER(ifmsh->csa, NULL); | 
|  | kfree_rcu(tmp_csa_settings, rcu_head); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return BSS_CHANGED_BEACON; | 
|  | } | 
|  |  | 
|  | static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | struct ieee802_11_elems *elems) | 
|  | { | 
|  | struct ieee80211_mgmt *mgmt_fwd; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | skb = dev_alloc_skb(local->tx_headroom + len); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  | skb_reserve(skb, local->tx_headroom); | 
|  | mgmt_fwd = skb_put(skb, len); | 
|  |  | 
|  | elems->mesh_chansw_params_ie->mesh_ttl--; | 
|  | elems->mesh_chansw_params_ie->mesh_flags &= | 
|  | ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; | 
|  |  | 
|  | memcpy(mgmt_fwd, mgmt, len); | 
|  | eth_broadcast_addr(mgmt_fwd->da); | 
|  | memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN); | 
|  |  | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | struct ieee802_11_elems elems; | 
|  | u16 pre_value; | 
|  | bool fwd_csa = true; | 
|  | size_t baselen; | 
|  | u8 *pos; | 
|  |  | 
|  | if (mgmt->u.action.u.measurement.action_code != | 
|  | WLAN_ACTION_SPCT_CHL_SWITCH) | 
|  | return; | 
|  |  | 
|  | pos = mgmt->u.action.u.chan_switch.variable; | 
|  | baselen = offsetof(struct ieee80211_mgmt, | 
|  | u.action.u.chan_switch.variable); | 
|  | ieee802_11_parse_elems(pos, len - baselen, true, &elems); | 
|  |  | 
|  | ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl; | 
|  | if (!--ifmsh->chsw_ttl) | 
|  | fwd_csa = false; | 
|  |  | 
|  | pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value); | 
|  | if (ifmsh->pre_value >= pre_value) | 
|  | return; | 
|  |  | 
|  | ifmsh->pre_value = pre_value; | 
|  |  | 
|  | if (!sdata->vif.csa_active && | 
|  | !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { | 
|  | mcsa_dbg(sdata, "Failed to process CSA action frame"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* forward or re-broadcast the CSA frame */ | 
|  | if (fwd_csa) { | 
|  | if (mesh_fwd_csa_frame(sdata, mgmt, len, &elems) < 0) | 
|  | mcsa_dbg(sdata, "Failed to forward the CSA frame"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | switch (mgmt->u.action.category) { | 
|  | case WLAN_CATEGORY_SELF_PROTECTED: | 
|  | switch (mgmt->u.action.u.self_prot.action_code) { | 
|  | case WLAN_SP_MESH_PEERING_OPEN: | 
|  | case WLAN_SP_MESH_PEERING_CLOSE: | 
|  | case WLAN_SP_MESH_PEERING_CONFIRM: | 
|  | mesh_rx_plink_frame(sdata, mgmt, len, rx_status); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case WLAN_CATEGORY_MESH_ACTION: | 
|  | if (mesh_action_is_path_sel(mgmt)) | 
|  | mesh_rx_path_sel_frame(sdata, mgmt, len); | 
|  | break; | 
|  | case WLAN_CATEGORY_SPECTRUM_MGMT: | 
|  | mesh_rx_csa_frame(sdata, mgmt, len); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_rx_status *rx_status; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u16 stype; | 
|  |  | 
|  | sdata_lock(sdata); | 
|  |  | 
|  | /* mesh already went down */ | 
|  | if (!sdata->u.mesh.mesh_id_len) | 
|  | goto out; | 
|  |  | 
|  | rx_status = IEEE80211_SKB_RXCB(skb); | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; | 
|  |  | 
|  | switch (stype) { | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, | 
|  | rx_status); | 
|  | break; | 
|  | case IEEE80211_STYPE_PROBE_REQ: | 
|  | ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_ACTION: | 
|  | ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); | 
|  | break; | 
|  | } | 
|  | out: | 
|  | sdata_unlock(sdata); | 
|  | } | 
|  |  | 
|  | static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | u32 bit, changed = 0; | 
|  |  | 
|  | for_each_set_bit(bit, &ifmsh->mbss_changed, | 
|  | sizeof(changed) * BITS_PER_BYTE) { | 
|  | clear_bit(bit, &ifmsh->mbss_changed); | 
|  | changed |= BIT(bit); | 
|  | } | 
|  |  | 
|  | if (sdata->vif.bss_conf.enable_beacon && | 
|  | (changed & (BSS_CHANGED_BEACON | | 
|  | BSS_CHANGED_HT | | 
|  | BSS_CHANGED_BASIC_RATES | | 
|  | BSS_CHANGED_BEACON_INT))) | 
|  | if (ieee80211_mesh_rebuild_beacon(sdata)) | 
|  | return; | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  |  | 
|  | sdata_lock(sdata); | 
|  |  | 
|  | /* mesh already went down */ | 
|  | if (!sdata->u.mesh.mesh_id_len) | 
|  | goto out; | 
|  |  | 
|  | if (ifmsh->preq_queue_len && | 
|  | time_after(jiffies, | 
|  | ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) | 
|  | mesh_path_start_discovery(sdata); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) | 
|  | ieee80211_mesh_housekeeping(sdata); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) | 
|  | ieee80211_mesh_rootpath(sdata); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags)) | 
|  | mesh_sync_adjust_tsf(sdata); | 
|  |  | 
|  | if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags)) | 
|  | mesh_bss_info_changed(sdata); | 
|  | out: | 
|  | sdata_unlock(sdata); | 
|  | } | 
|  |  | 
|  |  | 
|  | void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
|  | static u8 zero_addr[ETH_ALEN] = {}; | 
|  |  | 
|  | timer_setup(&ifmsh->housekeeping_timer, | 
|  | ieee80211_mesh_housekeeping_timer, 0); | 
|  |  | 
|  | ifmsh->accepting_plinks = true; | 
|  | atomic_set(&ifmsh->mpaths, 0); | 
|  | mesh_rmc_init(sdata); | 
|  | ifmsh->last_preq = jiffies; | 
|  | ifmsh->next_perr = jiffies; | 
|  | ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | 
|  | /* Allocate all mesh structures when creating the first mesh interface. */ | 
|  | if (!mesh_allocated) | 
|  | ieee80211s_init(); | 
|  |  | 
|  | mesh_pathtbl_init(sdata); | 
|  |  | 
|  | timer_setup(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, 0); | 
|  | timer_setup(&ifmsh->mesh_path_root_timer, | 
|  | ieee80211_mesh_path_root_timer, 0); | 
|  | INIT_LIST_HEAD(&ifmsh->preq_queue.list); | 
|  | skb_queue_head_init(&ifmsh->ps.bc_buf); | 
|  | spin_lock_init(&ifmsh->mesh_preq_queue_lock); | 
|  | spin_lock_init(&ifmsh->sync_offset_lock); | 
|  | RCU_INIT_POINTER(ifmsh->beacon, NULL); | 
|  |  | 
|  | sdata->vif.bss_conf.bssid = zero_addr; | 
|  | } | 
|  |  | 
|  | void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | mesh_rmc_free(sdata); | 
|  | mesh_pathtbl_unregister(sdata); | 
|  | } |